maybe chmod 0644 'apt/apt.conf.d/70debconf'
maybe chmod 0644 'apt/apt.conf.d/99needrestart'
maybe chmod 0755 'apt/auth.conf.d'
+maybe chmod 0755 'apt/keyrings'
+maybe chmod 0644 'apt/keyrings/salt-archive-keyring-2023.gpg'
maybe chmod 0644 'apt/listchanges.conf'
maybe chmod 0755 'apt/listchanges.conf.d'
maybe chmod 0755 'apt/preferences.d'
maybe chmod 0644 'apt/sources.list.2017-06-17.jessie.bak'
maybe chmod 0644 'apt/sources.list.2018-08-25.stretch.bak'
maybe chmod 0644 'apt/sources.list.2019-09-04.buster.bak'
+maybe chmod 0644 'apt/sources.list.2021-10-31.bullseye.bak'
maybe chmod 0755 'apt/sources.list.d'
maybe chmod 0644 'apt/sources.list.d/dns-oarc.list'
maybe chmod 0644 'apt/sources.list.d/dns-oarc.list.2019-09-04.buster.bak'
+maybe chmod 0644 'apt/sources.list.d/dns-oarc.list.2022-11-30.bullseye.bak'
maybe chmod 0644 'apt/sources.list.d/fbrehm.list'
maybe chmod 0644 'apt/sources.list.d/fbrehm.list.2019-09-04.buster.bak'
+maybe chmod 0644 'apt/sources.list.d/fbrehm.list.2021-09-16.bullseye.bak'
maybe chmod 0644 'apt/sources.list.d/salt.list'
maybe chmod 0644 'apt/sources.list.d/salt.list.2021-04-08.buster.bak'
+maybe chmod 0644 'apt/sources.list.d/salt.list.2021-10-31.bullseye.bak'
maybe chmod 0644 'apt/trusted.gpg'
maybe chmod 0755 'apt/trusted.gpg.d'
maybe chmod 0644 'apt/trusted.gpg.d/debian-archive-bookworm-automatic.gpg'
maybe chmod 0644 'apt/trusted.gpg.d/debian-archive-buster-automatic.gpg'
maybe chmod 0644 'apt/trusted.gpg.d/debian-archive-buster-security-automatic.gpg'
maybe chmod 0644 'apt/trusted.gpg.d/debian-archive-buster-stable.gpg'
+maybe chmod 0644 'apt/trusted.gpg.d/frank.brehm.asc'
+maybe chmod 0644 'apt/trusted.gpg.d/frank.brehm.gpg'
+maybe chmod 0644 'apt/trusted.gpg.d/icinga.asc'
maybe chmod 0755 'apticron'
maybe chmod 0644 'apticron/README'
maybe chmod 0644 'apticron/apticron.conf'
maybe chmod 0644 'cczerc'
maybe chmod 0755 'chrony'
maybe chmod 0644 'chrony/chrony.conf'
-maybe chmod 0644 'chrony/chrony.conf.ucf-dist'
maybe chmod 0640 'chrony/chrony.keys'
maybe chmod 0755 'chrony/conf.d'
maybe chmod 0644 'chrony/conf.d/README'
maybe chmod 0644 'default/grub'
maybe chmod 0755 'default/grub.d'
maybe chmod 0644 'default/grub.d/init-select.cfg'
-maybe chmod 0644 'default/grub.ucf-dist'
maybe chmod 0644 'default/halt'
maybe chmod 0644 'default/haveged'
maybe chmod 0644 'default/hwclock'
maybe chmod 0644 'fail2ban/action.d/route.conf'
maybe chmod 0644 'fail2ban/action.d/sendmail-buffered.conf'
maybe chmod 0644 'fail2ban/action.d/sendmail-common.conf'
-maybe chmod 0644 'fail2ban/action.d/sendmail-common.conf.dpkg-dist'
maybe chmod 0644 'fail2ban/action.d/sendmail-geoip-lines.conf'
maybe chmod 0644 'fail2ban/action.d/sendmail-whois-ipjailmatches.conf'
maybe chmod 0644 'fail2ban/action.d/sendmail-whois-ipmatches.conf'
maybe chmod 0644 'fail2ban/action.d/sendmail-whois-lines.conf'
maybe chmod 0644 'fail2ban/action.d/sendmail-whois-matches.conf'
maybe chmod 0644 'fail2ban/action.d/sendmail-whois.conf'
-maybe chmod 0644 'fail2ban/action.d/sendmail-whois.conf.dpkg-dist'
maybe chmod 0644 'fail2ban/action.d/sendmail.conf'
-maybe chmod 0644 'fail2ban/action.d/sendmail.conf.dpkg-dist'
maybe chmod 0644 'fail2ban/action.d/shorewall-ipset-proto6.conf'
maybe chmod 0644 'fail2ban/action.d/shorewall.conf'
maybe chmod 0644 'fail2ban/action.d/smtp.py'
maybe chmod 0644 'fail2ban/action.d/ufw.conf'
maybe chmod 0644 'fail2ban/action.d/xarf-login-attack.conf'
maybe chmod 0644 'fail2ban/fail2ban.conf'
-maybe chmod 0644 'fail2ban/fail2ban.conf.dpkg-dist'
maybe chmod 0755 'fail2ban/fail2ban.d'
maybe chmod 0755 'fail2ban/filter.d'
maybe chmod 0644 'fail2ban/filter.d/3proxy.conf'
maybe chmod 0644 'fail2ban/filter.d/zoneminder.conf'
maybe chmod 0644 'fail2ban/jail.conf'
maybe chmod 0644 'fail2ban/jail.conf.bak'
-maybe chmod 0644 'fail2ban/jail.conf.dpkg-dist'
maybe chmod 0755 'fail2ban/jail.d'
maybe chmod 0644 'fail2ban/jail.d/apache-jail.conf'
maybe chmod 0644 'fail2ban/jail.d/defaults-debian.conf'
maybe chmod 0755 'resolvconf/update.d/libc'
maybe chmod 0644 'rpc'
maybe chmod 0644 'rsyslog.conf'
-maybe chmod 0644 'rsyslog.conf.dpkg-dist'
maybe chmod 0755 'rsyslog.d'
maybe chmod 0644 'rsyslog.d/60-default.conf'
maybe chmod 0644 'rsyslog.d/70-pb.conf'
maybe chmod 0755 'skel'
maybe chmod 0644 'skel/.bash_logout'
maybe chmod 0644 'skel/.bashrc'
-maybe chmod 0644 'skel/.bashrc.dpkg-dist'
maybe chmod 0644 'skel/.profile'
maybe chmod 0755 'skel/bin'
maybe chmod 0755 'ssh'
# deb cdrom:[Debian GNU/Linux stretch-DI-alpha7 _Stretch_ - Official Snapshot amd64 NETINST Binary-1 20160630-14:29]/ stretch main
-# main bullseye repositories
-deb http://ftp-stud.hs-esslingen.de/debian bullseye main contrib non-free
-deb-src http://ftp-stud.hs-esslingen.de/debian bullseye main contrib non-free
+# main bookworm repositories
+deb http://ftp-stud.hs-esslingen.de/debian bookworm main contrib non-free
+deb-src http://ftp-stud.hs-esslingen.de/debian bookworm main contrib non-free
-# bullseye security updates - see https://www.debian.org/security/
-deb http://security.debian.org/debian-security bullseye-security main contrib non-free
+# bookworm security updates - see https://www.debian.org/security/
+deb http://security.debian.org/debian-security bookworm-security main contrib non-free
-# bullseye-updates, previously known as 'volatile'
-deb http://ftp-stud.hs-esslingen.de/debian bullseye-updates main contrib non-free
-deb-src http://ftp-stud.hs-esslingen.de/debian bullseye-updates main contrib non-free
+# bookworm-updates, previously known as 'volatile'
+deb http://ftp-stud.hs-esslingen.de/debian bookworm-updates main contrib non-free
+deb-src http://ftp-stud.hs-esslingen.de/debian bookworm-updates main contrib non-free
-# bullseye-backports
-deb http://ftp-stud.hs-esslingen.de/debian bullseye-backports main contrib non-free
-deb-src http://ftp-stud.hs-esslingen.de/debian bullseye-backports main contrib non-free
+# bookworm-backports
+deb http://ftp-stud.hs-esslingen.de/debian bookworm-backports main contrib non-free
+deb-src http://ftp-stud.hs-esslingen.de/debian bookworm-backports main contrib non-free
# vim: noet ts=8 list
--- /dev/null
+#
+
+# deb cdrom:[Debian GNU/Linux stretch-DI-alpha7 _Stretch_ - Official Snapshot amd64 NETINST Binary-1 20160630-14:29]/ stretch main
+
+# main bullseye repositories
+deb http://ftp-stud.hs-esslingen.de/debian bullseye main contrib non-free
+deb-src http://ftp-stud.hs-esslingen.de/debian bullseye main contrib non-free
+
+# bullseye security updates - see https://www.debian.org/security/
+deb http://security.debian.org/debian-security bullseye-security main contrib non-free
+
+# bullseye-updates, previously known as 'volatile'
+deb http://ftp-stud.hs-esslingen.de/debian bullseye-updates main contrib non-free
+deb-src http://ftp-stud.hs-esslingen.de/debian bullseye-updates main contrib non-free
+
+# bullseye-backports
+deb http://ftp-stud.hs-esslingen.de/debian bullseye-backports main contrib non-free
+deb-src http://ftp-stud.hs-esslingen.de/debian bullseye-backports main contrib non-free
+
+# vim: noet ts=8 list
-# deb http://pkg.dns-oarc.net/debian bullseye main
+deb http://pkg.dns-oarc.net/debian bookworm main
# vim: noet ts=8 list
--- /dev/null
+# deb http://pkg.dns-oarc.net/debian bullseye main
+
+# vim: noet ts=8 list
# Packages Frank Brehm
# ---------------------
-deb http://repo.uhu-banane.de/Debian/bullseye ./
+deb http://repo.uhu-banane.de/Debian/bookworm ./
deb-src http://repo.uhu-banane.de/Sources ./
# vim: noet ts=8 list
--- /dev/null
+# Packages Frank Brehm
+# ---------------------
+
+deb http://repo.uhu-banane.de/Debian/bullseye ./
+deb-src http://repo.uhu-banane.de/Sources ./
+
+# vim: noet ts=8 list
-deb [signed-by=/usr/share/keyrings/salt-archive-keyring.gpg arch=amd64] https://repo.saltproject.io/py3/debian/11/amd64/latest bullseye main
+deb [signed-by=/etc/apt/keyrings/salt-archive-keyring-2023.gpg arch=amd64] https://repo.saltproject.io/salt/py3/debian/11/amd64/latest bullseye main
--- /dev/null
+deb [signed-by=/usr/share/keyrings/salt-archive-keyring.gpg arch=amd64] https://repo.saltproject.io/py3/debian/11/amd64/latest bullseye main
--- /dev/null
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+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+=TpPn
+-----END PGP PUBLIC KEY BLOCK-----
--- /dev/null
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+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+=icbY
+-----END PGP PUBLIC KEY BLOCK-----
+++ /dev/null
-# Welcome to the chrony configuration file. See chrony.conf(5) for more
-# information about usable directives.
-
-# Include configuration files found in /etc/chrony/conf.d.
-confdir /etc/chrony/conf.d
-
-# Use Debian vendor zone.
-pool 2.debian.pool.ntp.org iburst
-
-# Use time sources from DHCP.
-sourcedir /run/chrony-dhcp
-
-# Use NTP sources found in /etc/chrony/sources.d.
-sourcedir /etc/chrony/sources.d
-
-# This directive specify the location of the file containing ID/key pairs for
-# NTP authentication.
-keyfile /etc/chrony/chrony.keys
-
-# This directive specify the file into which chronyd will store the rate
-# information.
-driftfile /var/lib/chrony/chrony.drift
-
-# Save NTS keys and cookies.
-ntsdumpdir /var/lib/chrony
-
-# Uncomment the following line to turn logging on.
-#log tracking measurements statistics
-
-# Log files location.
-logdir /var/log/chrony
-
-# Stop bad estimates upsetting machine clock.
-maxupdateskew 100.0
-
-# This directive enables kernel synchronisation (every 11 minutes) of the
-# real-time clock. Note that it can’t be used along with the 'rtcfile' directive.
-rtcsync
-
-# Step the system clock instead of slewing it if the adjustment is larger than
-# one second, but only in the first three clock updates.
-makestep 1 3
-
-# Get TAI-UTC offset and leap seconds from the system tz database.
-# This directive must be commented out when using time sources serving
-# leap-smeared time.
-leapsectz right/UTC
+++ /dev/null
-# If you change this file, run 'update-grub' afterwards to update
-# /boot/grub/grub.cfg.
-# For full documentation of the options in this file, see:
-# info -f grub -n 'Simple configuration'
-
-GRUB_DEFAULT=0
-GRUB_TIMEOUT=5
-GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
-GRUB_CMDLINE_LINUX_DEFAULT=""
-GRUB_CMDLINE_LINUX=""
-
-# Uncomment to enable BadRAM filtering, modify to suit your needs
-# This works with Linux (no patch required) and with any kernel that obtains
-# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
-#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
-
-# Uncomment to disable graphical terminal (grub-pc only)
-#GRUB_TERMINAL=console
-
-# The resolution used on graphical terminal
-# note that you can use only modes which your graphic card supports via VBE
-# you can see them in real GRUB with the command `vbeinfo'
-#GRUB_GFXMODE=640x480
-
-# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
-#GRUB_DISABLE_LINUX_UUID=true
-
-# Uncomment to disable generation of recovery mode menu entries
-#GRUB_DISABLE_RECOVERY="true"
-
-# Uncomment to get a beep at grub start
-#GRUB_INIT_TUNE="480 440 1"
+++ /dev/null
-# Fail2Ban configuration file
-#
-# Common settings for sendmail actions
-#
-# Users can override the defaults in sendmail-common.local
-
-[INCLUDES]
-
-after = sendmail-common.local
-
-[Definition]
-
-# Option: actionstart
-# Notes.: command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values: CMD
-#
-actionstart = printf %%b "Subject: [Fail2Ban] <name>: started on <fq-hostname>
- Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
- From: <sendername> <<sender>>
- To: <dest>\n
- Hi,\n
- The jail <name> has been started successfully.\n
- Regards,\n
- Fail2Ban" | <mailcmd>
-
-# Option: actionstop
-# Notes.: command executed at the stop of jail (or at the end of Fail2Ban)
-# Values: CMD
-#
-actionstop = printf %%b "Subject: [Fail2Ban] <name>: stopped on <fq-hostname>
- Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
- From: <sendername> <<sender>>
- To: <dest>\n
- Hi,\n
- The jail <name> has been stopped.\n
- Regards,\n
- Fail2Ban" | <mailcmd>
-
-# Option: actioncheck
-# Notes.: command executed once before each actionban command
-# Values: CMD
-#
-actioncheck =
-
-# Option: actionban
-# Notes.: command executed when banning an IP. Take care that the
-# command is executed with Fail2Ban user rights.
-# Tags: See jail.conf(5) man page
-# Values: CMD
-#
-actionban =
-
-# Option: actionunban
-# Notes.: command executed when unbanning an IP. Take care that the
-# command is executed with Fail2Ban user rights.
-# Tags: See jail.conf(5) man page
-# Values: CMD
-#
-actionunban =
-
-[Init]
-
-# Your system mail command
-#
-mailcmd = /usr/sbin/sendmail -f "<sender>" "<dest>"
-
-# Recipient mail address
-#
-dest = root
-
-# Sender mail address
-#
-sender = fail2ban
-
-# Sender display name
-#
-sendername = Fail2Ban
+++ /dev/null
-# Fail2Ban configuration file
-#
-# Author: Cyril Jaquier
-#
-#
-
-[INCLUDES]
-
-before = sendmail-common.conf
- mail-whois-common.conf
-
-[Definition]
-
-# bypass ban/unban for restored tickets
-norestored = 1
-
-# Option: actionban
-# Notes.: command executed when banning an IP. Take care that the
-# command is executed with Fail2Ban user rights.
-# Tags: See jail.conf(5) man page
-# Values: CMD
-#
-actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from <fq-hostname>
- Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
- From: <sendername> <<sender>>
- To: <dest>\n
- Hi,\n
- The IP <ip> has just been banned by Fail2Ban after
- <failures> attempts against <name>.\n\n
- Here is more information about <ip> :\n
- `%(_whois_command)s`\n
- Regards,\n
- Fail2Ban" | <mailcmd>
-
-[Init]
-
-# Default name of the chain
-#
-name = default
-
+++ /dev/null
-# Fail2Ban configuration file
-#
-# Author: Cyril Jaquier
-#
-#
-
-[INCLUDES]
-
-before = sendmail-common.conf
-
-[Definition]
-
-# bypass ban/unban for restored tickets
-norestored = 1
-
-# Option: actionban
-# Notes.: command executed when banning an IP. Take care that the
-# command is executed with Fail2Ban user rights.
-# Tags: See jail.conf(5) man page
-# Values: CMD
-#
-actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from <fq-hostname>
- Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
- From: <sendername> <<sender>>
- To: <dest>\n
- Hi,\n
- The IP <ip> has just been banned by Fail2Ban after
- <failures> attempts against <name>.\n
- Regards,\n
- Fail2Ban" | <mailcmd>
-
-[Init]
-
-# Default name of the chain
-#
-name = default
-
+++ /dev/null
-# Fail2Ban main configuration file
-#
-# Comments: use '#' for comment lines and ';' (following a space) for inline comments
-#
-# Changes: in most of the cases you should not modify this
-# file, but provide customizations in fail2ban.local file, e.g.:
-#
-# [DEFAULT]
-# loglevel = DEBUG
-#
-
-[DEFAULT]
-
-# Option: loglevel
-# Notes.: Set the log level output.
-# CRITICAL
-# ERROR
-# WARNING
-# NOTICE
-# INFO
-# DEBUG
-# Values: [ LEVEL ] Default: INFO
-#
-loglevel = INFO
-
-# Option: logtarget
-# Notes.: Set the log target. This could be a file, SYSLOG, STDERR or STDOUT.
-# Only one log target can be specified.
-# If you change logtarget from the default value and you are
-# using logrotate -- also adjust or disable rotation in the
-# corresponding configuration file
-# (e.g. /etc/logrotate.d/fail2ban on Debian systems)
-# Values: [ STDOUT | STDERR | SYSLOG | SYSOUT | FILE ] Default: STDERR
-#
-logtarget = /var/log/fail2ban.log
-
-# Option: syslogsocket
-# Notes: Set the syslog socket file. Only used when logtarget is SYSLOG
-# auto uses platform.system() to determine predefined paths
-# Values: [ auto | FILE ] Default: auto
-syslogsocket = auto
-
-# Option: socket
-# Notes.: Set the socket file. This is used to communicate with the daemon. Do
-# not remove this file when Fail2ban runs. It will not be possible to
-# communicate with the server afterwards.
-# Values: [ FILE ] Default: /var/run/fail2ban/fail2ban.sock
-#
-socket = /var/run/fail2ban/fail2ban.sock
-
-# Option: pidfile
-# Notes.: Set the PID file. This is used to store the process ID of the
-# fail2ban server.
-# Values: [ FILE ] Default: /var/run/fail2ban/fail2ban.pid
-#
-pidfile = /var/run/fail2ban/fail2ban.pid
-
-# Options: dbfile
-# Notes.: Set the file for the fail2ban persistent data to be stored.
-# A value of ":memory:" means database is only stored in memory
-# and data is lost when fail2ban is stopped.
-# A value of "None" disables the database.
-# Values: [ None :memory: FILE ] Default: /var/lib/fail2ban/fail2ban.sqlite3
-dbfile = /var/lib/fail2ban/fail2ban.sqlite3
-
-# Options: dbpurgeage
-# Notes.: Sets age at which bans should be purged from the database
-# Values: [ SECONDS ] Default: 86400 (24hours)
-dbpurgeage = 1d
-
-# Options: dbmaxmatches
-# Notes.: Number of matches stored in database per ticket (resolvable via
-# tags <ipmatches>/<ipjailmatches> in actions)
-# Values: [ INT ] Default: 10
-dbmaxmatches = 10
-
-[Definition]
-
-
-[Thread]
-
-# Options: stacksize
-# Notes.: Specifies the stack size (in KiB) to be used for subsequently created threads,
-# and must be 0 or a positive integer value of at least 32.
-# Values: [ SIZE ] Default: 0 (use platform or configured default)
-#stacksize = 0
+++ /dev/null
-#
-# WARNING: heavily refactored in 0.9.0 release. Please review and
-# customize settings for your setup.
-#
-# Changes: in most of the cases you should not modify this
-# file, but provide customizations in jail.local file,
-# or separate .conf files under jail.d/ directory, e.g.:
-#
-# HOW TO ACTIVATE JAILS:
-#
-# YOU SHOULD NOT MODIFY THIS FILE.
-#
-# It will probably be overwritten or improved in a distribution update.
-#
-# Provide customizations in a jail.local file or a jail.d/customisation.local.
-# For example to change the default bantime for all jails and to enable the
-# ssh-iptables jail the following (uncommented) would appear in the .local file.
-# See man 5 jail.conf for details.
-#
-# [DEFAULT]
-# bantime = 1h
-#
-# [sshd]
-# enabled = true
-#
-# See jail.conf(5) man page for more information
-
-
-
-# Comments: use '#' for comment lines and ';' (following a space) for inline comments
-
-
-[INCLUDES]
-
-#before = paths-distro.conf
-before = paths-debian.conf
-
-# The DEFAULT allows a global definition of the options. They can be overridden
-# in each jail afterwards.
-
-[DEFAULT]
-
-#
-# MISCELLANEOUS OPTIONS
-#
-
-# "bantime.increment" allows to use database for searching of previously banned ip's to increase a
-# default ban time using special formula, default it is banTime * 1, 2, 4, 8, 16, 32...
-#bantime.increment = true
-
-# "bantime.rndtime" is the max number of seconds using for mixing with random time
-# to prevent "clever" botnets calculate exact time IP can be unbanned again:
-#bantime.rndtime =
-
-# "bantime.maxtime" is the max number of seconds using the ban time can reach (doesn't grow further)
-#bantime.maxtime =
-
-# "bantime.factor" is a coefficient to calculate exponent growing of the formula or common multiplier,
-# default value of factor is 1 and with default value of formula, the ban time
-# grows by 1, 2, 4, 8, 16 ...
-#bantime.factor = 1
-
-# "bantime.formula" used by default to calculate next value of ban time, default value below,
-# the same ban time growing will be reached by multipliers 1, 2, 4, 8, 16, 32...
-#bantime.formula = ban.Time * (1<<(ban.Count if ban.Count<20 else 20)) * banFactor
-#
-# more aggressive example of formula has the same values only for factor "2.0 / 2.885385" :
-#bantime.formula = ban.Time * math.exp(float(ban.Count+1)*banFactor)/math.exp(1*banFactor)
-
-# "bantime.multipliers" used to calculate next value of ban time instead of formula, coresponding
-# previously ban count and given "bantime.factor" (for multipliers default is 1);
-# following example grows ban time by 1, 2, 4, 8, 16 ... and if last ban count greater as multipliers count,
-# always used last multiplier (64 in example), for factor '1' and original ban time 600 - 10.6 hours
-#bantime.multipliers = 1 2 4 8 16 32 64
-# following example can be used for small initial ban time (bantime=60) - it grows more aggressive at begin,
-# for bantime=60 the multipliers are minutes and equal: 1 min, 5 min, 30 min, 1 hour, 5 hour, 12 hour, 1 day, 2 day
-#bantime.multipliers = 1 5 30 60 300 720 1440 2880
-
-# "bantime.overalljails" (if true) specifies the search of IP in the database will be executed
-# cross over all jails, if false (dafault), only current jail of the ban IP will be searched
-#bantime.overalljails = false
-
-# --------------------
-
-# "ignoreself" specifies whether the local resp. own IP addresses should be ignored
-# (default is true). Fail2ban will not ban a host which matches such addresses.
-#ignoreself = true
-
-# "ignoreip" can be a list of IP addresses, CIDR masks or DNS hosts. Fail2ban
-# will not ban a host which matches an address in this list. Several addresses
-# can be defined using space (and/or comma) separator.
-#ignoreip = 127.0.0.1/8 ::1
-
-# External command that will take an tagged arguments to ignore, e.g. <ip>,
-# and return true if the IP is to be ignored. False otherwise.
-#
-# ignorecommand = /path/to/command <ip>
-ignorecommand =
-
-# "bantime" is the number of seconds that a host is banned.
-bantime = 10m
-
-# A host is banned if it has generated "maxretry" during the last "findtime"
-# seconds.
-findtime = 10m
-
-# "maxretry" is the number of failures before a host get banned.
-maxretry = 5
-
-# "maxmatches" is the number of matches stored in ticket (resolvable via tag <matches> in actions).
-maxmatches = %(maxretry)s
-
-# "backend" specifies the backend used to get files modification.
-# Available options are "pyinotify", "gamin", "polling", "systemd" and "auto".
-# This option can be overridden in each jail as well.
-#
-# pyinotify: requires pyinotify (a file alteration monitor) to be installed.
-# If pyinotify is not installed, Fail2ban will use auto.
-# gamin: requires Gamin (a file alteration monitor) to be installed.
-# If Gamin is not installed, Fail2ban will use auto.
-# polling: uses a polling algorithm which does not require external libraries.
-# systemd: uses systemd python library to access the systemd journal.
-# Specifying "logpath" is not valid for this backend.
-# See "journalmatch" in the jails associated filter config
-# auto: will try to use the following backends, in order:
-# pyinotify, gamin, polling.
-#
-# Note: if systemd backend is chosen as the default but you enable a jail
-# for which logs are present only in its own log files, specify some other
-# backend for that jail (e.g. polling) and provide empty value for
-# journalmatch. See https://github.com/fail2ban/fail2ban/issues/959#issuecomment-74901200
-backend = auto
-
-# "usedns" specifies if jails should trust hostnames in logs,
-# warn when DNS lookups are performed, or ignore all hostnames in logs
-#
-# yes: if a hostname is encountered, a DNS lookup will be performed.
-# warn: if a hostname is encountered, a DNS lookup will be performed,
-# but it will be logged as a warning.
-# no: if a hostname is encountered, will not be used for banning,
-# but it will be logged as info.
-# raw: use raw value (no hostname), allow use it for no-host filters/actions (example user)
-usedns = warn
-
-# "logencoding" specifies the encoding of the log files handled by the jail
-# This is used to decode the lines from the log file.
-# Typical examples: "ascii", "utf-8"
-#
-# auto: will use the system locale setting
-logencoding = auto
-
-# "enabled" enables the jails.
-# By default all jails are disabled, and it should stay this way.
-# Enable only relevant to your setup jails in your .local or jail.d/*.conf
-#
-# true: jail will be enabled and log files will get monitored for changes
-# false: jail is not enabled
-enabled = false
-
-
-# "mode" defines the mode of the filter (see corresponding filter implementation for more info).
-mode = normal
-
-# "filter" defines the filter to use by the jail.
-# By default jails have names matching their filter name
-#
-filter = %(__name__)s[mode=%(mode)s]
-
-
-#
-# ACTIONS
-#
-
-# Some options used for actions
-
-# Destination email address used solely for the interpolations in
-# jail.{conf,local,d/*} configuration files.
-destemail = root@localhost
-
-# Sender email address used solely for some actions
-sender = root@<fq-hostname>
-
-# E-mail action. Since 0.8.1 Fail2Ban uses sendmail MTA for the
-# mailing. Change mta configuration parameter to mail if you want to
-# revert to conventional 'mail'.
-mta = sendmail
-
-# Default protocol
-protocol = tcp
-
-# Specify chain where jumps would need to be added in ban-actions expecting parameter chain
-chain = <known/chain>
-
-# Ports to be banned
-# Usually should be overridden in a particular jail
-port = 0:65535
-
-# Format of user-agent https://tools.ietf.org/html/rfc7231#section-5.5.3
-fail2ban_agent = Fail2Ban/%(fail2ban_version)s
-
-#
-# Action shortcuts. To be used to define action parameter
-
-# Default banning action (e.g. iptables, iptables-new,
-# iptables-multiport, shorewall, etc) It is used to define
-# action_* variables. Can be overridden globally or per
-# section within jail.local file
-banaction = iptables-multiport
-banaction_allports = iptables-allports
-
-# The simplest action to take: ban only
-action_ = %(banaction)s[port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
-
-# ban & send an e-mail with whois report to the destemail.
-action_mw = %(action_)s
- %(mta)s-whois[sender="%(sender)s", dest="%(destemail)s", protocol="%(protocol)s", chain="%(chain)s"]
-
-# ban & send an e-mail with whois report and relevant log lines
-# to the destemail.
-action_mwl = %(action_)s
- %(mta)s-whois-lines[sender="%(sender)s", dest="%(destemail)s", logpath="%(logpath)s", chain="%(chain)s"]
-
-# See the IMPORTANT note in action.d/xarf-login-attack for when to use this action
-#
-# ban & send a xarf e-mail to abuse contact of IP address and include relevant log lines
-# to the destemail.
-action_xarf = %(action_)s
- xarf-login-attack[service=%(__name__)s, sender="%(sender)s", logpath="%(logpath)s", port="%(port)s"]
-
-# ban IP on CloudFlare & send an e-mail with whois report and relevant log lines
-# to the destemail.
-action_cf_mwl = cloudflare[cfuser="%(cfemail)s", cftoken="%(cfapikey)s"]
- %(mta)s-whois-lines[sender="%(sender)s", dest="%(destemail)s", logpath="%(logpath)s", chain="%(chain)s"]
-
-# Report block via blocklist.de fail2ban reporting service API
-#
-# See the IMPORTANT note in action.d/blocklist_de.conf for when to use this action.
-# Specify expected parameters in file action.d/blocklist_de.local or if the interpolation
-# `action_blocklist_de` used for the action, set value of `blocklist_de_apikey`
-# in your `jail.local` globally (section [DEFAULT]) or per specific jail section (resp. in
-# corresponding jail.d/my-jail.local file).
-#
-action_blocklist_de = blocklist_de[email="%(sender)s", service="%(__name__)s", apikey="%(blocklist_de_apikey)s", agent="%(fail2ban_agent)s"]
-
-# Report ban via badips.com, and use as blacklist
-#
-# See BadIPsAction docstring in config/action.d/badips.py for
-# documentation for this action.
-#
-# NOTE: This action relies on banaction being present on start and therefore
-# should be last action defined for a jail.
-#
-action_badips = badips.py[category="%(__name__)s", banaction="%(banaction)s", agent="%(fail2ban_agent)s"]
-#
-# Report ban via badips.com (uses action.d/badips.conf for reporting only)
-#
-action_badips_report = badips[category="%(__name__)s", agent="%(fail2ban_agent)s"]
-
-# Report ban via abuseipdb.com.
-#
-# See action.d/abuseipdb.conf for usage example and details.
-#
-action_abuseipdb = abuseipdb
-
-# Choose default action. To change, just override value of 'action' with the
-# interpolation to the chosen action shortcut (e.g. action_mw, action_mwl, etc) in jail.local
-# globally (section [DEFAULT]) or per specific section
-action = %(action_)s
-
-
-#
-# JAILS
-#
-
-#
-# SSH servers
-#
-
-[sshd]
-
-# To use more aggressive sshd modes set filter parameter "mode" in jail.local:
-# normal (default), ddos, extra or aggressive (combines all).
-# See "tests/files/logs/sshd" or "filter.d/sshd.conf" for usage example and details.
-#mode = normal
-port = ssh
-logpath = %(sshd_log)s
-backend = %(sshd_backend)s
-
-
-[dropbear]
-
-port = ssh
-logpath = %(dropbear_log)s
-backend = %(dropbear_backend)s
-
-
-[selinux-ssh]
-
-port = ssh
-logpath = %(auditd_log)s
-
-
-#
-# HTTP servers
-#
-
-[apache-auth]
-
-port = http,https
-logpath = %(apache_error_log)s
-
-
-[apache-badbots]
-# Ban hosts which agent identifies spammer robots crawling the web
-# for email addresses. The mail outputs are buffered.
-port = http,https
-logpath = %(apache_access_log)s
-bantime = 48h
-maxretry = 1
-
-
-[apache-noscript]
-
-port = http,https
-logpath = %(apache_error_log)s
-
-
-[apache-overflows]
-
-port = http,https
-logpath = %(apache_error_log)s
-maxretry = 2
-
-
-[apache-nohome]
-
-port = http,https
-logpath = %(apache_error_log)s
-maxretry = 2
-
-
-[apache-botsearch]
-
-port = http,https
-logpath = %(apache_error_log)s
-maxretry = 2
-
-
-[apache-fakegooglebot]
-
-port = http,https
-logpath = %(apache_access_log)s
-maxretry = 1
-ignorecommand = %(ignorecommands_dir)s/apache-fakegooglebot <ip>
-
-
-[apache-modsecurity]
-
-port = http,https
-logpath = %(apache_error_log)s
-maxretry = 2
-
-
-[apache-shellshock]
-
-port = http,https
-logpath = %(apache_error_log)s
-maxretry = 1
-
-
-[openhab-auth]
-
-filter = openhab
-banaction = %(banaction_allports)s
-logpath = /opt/openhab/logs/request.log
-
-
-[nginx-http-auth]
-
-port = http,https
-logpath = %(nginx_error_log)s
-
-# To use 'nginx-limit-req' jail you should have `ngx_http_limit_req_module`
-# and define `limit_req` and `limit_req_zone` as described in nginx documentation
-# http://nginx.org/en/docs/http/ngx_http_limit_req_module.html
-# or for example see in 'config/filter.d/nginx-limit-req.conf'
-[nginx-limit-req]
-port = http,https
-logpath = %(nginx_error_log)s
-
-[nginx-botsearch]
-
-port = http,https
-logpath = %(nginx_error_log)s
-maxretry = 2
-
-
-# Ban attackers that try to use PHP's URL-fopen() functionality
-# through GET/POST variables. - Experimental, with more than a year
-# of usage in production environments.
-
-[php-url-fopen]
-
-port = http,https
-logpath = %(nginx_access_log)s
- %(apache_access_log)s
-
-
-[suhosin]
-
-port = http,https
-logpath = %(suhosin_log)s
-
-
-[lighttpd-auth]
-# Same as above for Apache's mod_auth
-# It catches wrong authentifications
-port = http,https
-logpath = %(lighttpd_error_log)s
-
-
-#
-# Webmail and groupware servers
-#
-
-[roundcube-auth]
-
-port = http,https
-logpath = %(roundcube_errors_log)s
-# Use following line in your jail.local if roundcube logs to journal.
-#backend = %(syslog_backend)s
-
-
-[openwebmail]
-
-port = http,https
-logpath = /var/log/openwebmail.log
-
-
-[horde]
-
-port = http,https
-logpath = /var/log/horde/horde.log
-
-
-[groupoffice]
-
-port = http,https
-logpath = /home/groupoffice/log/info.log
-
-
-[sogo-auth]
-# Monitor SOGo groupware server
-# without proxy this would be:
-# port = 20000
-port = http,https
-logpath = /var/log/sogo/sogo.log
-
-
-[tine20]
-
-logpath = /var/log/tine20/tine20.log
-port = http,https
-
-
-#
-# Web Applications
-#
-#
-
-[drupal-auth]
-
-port = http,https
-logpath = %(syslog_daemon)s
-backend = %(syslog_backend)s
-
-[guacamole]
-
-port = http,https
-logpath = /var/log/tomcat*/catalina.out
-#logpath = /var/log/guacamole.log
-
-[monit]
-#Ban clients brute-forcing the monit gui login
-port = 2812
-logpath = /var/log/monit
- /var/log/monit.log
-
-
-[webmin-auth]
-
-port = 10000
-logpath = %(syslog_authpriv)s
-backend = %(syslog_backend)s
-
-
-[froxlor-auth]
-
-port = http,https
-logpath = %(syslog_authpriv)s
-backend = %(syslog_backend)s
-
-
-#
-# HTTP Proxy servers
-#
-#
-
-[squid]
-
-port = 80,443,3128,8080
-logpath = /var/log/squid/access.log
-
-
-[3proxy]
-
-port = 3128
-logpath = /var/log/3proxy.log
-
-
-#
-# FTP servers
-#
-
-
-[proftpd]
-
-port = ftp,ftp-data,ftps,ftps-data
-logpath = %(proftpd_log)s
-backend = %(proftpd_backend)s
-
-
-[pure-ftpd]
-
-port = ftp,ftp-data,ftps,ftps-data
-logpath = %(pureftpd_log)s
-backend = %(pureftpd_backend)s
-
-
-[gssftpd]
-
-port = ftp,ftp-data,ftps,ftps-data
-logpath = %(syslog_daemon)s
-backend = %(syslog_backend)s
-
-
-[wuftpd]
-
-port = ftp,ftp-data,ftps,ftps-data
-logpath = %(wuftpd_log)s
-backend = %(wuftpd_backend)s
-
-
-[vsftpd]
-# or overwrite it in jails.local to be
-# logpath = %(syslog_authpriv)s
-# if you want to rely on PAM failed login attempts
-# vsftpd's failregex should match both of those formats
-port = ftp,ftp-data,ftps,ftps-data
-logpath = %(vsftpd_log)s
-
-
-#
-# Mail servers
-#
-
-# ASSP SMTP Proxy Jail
-[assp]
-
-port = smtp,465,submission
-logpath = /root/path/to/assp/logs/maillog.txt
-
-
-[courier-smtp]
-
-port = smtp,465,submission
-logpath = %(syslog_mail)s
-backend = %(syslog_backend)s
-
-
-[postfix]
-# To use another modes set filter parameter "mode" in jail.local:
-mode = more
-port = smtp,465,submission
-logpath = %(postfix_log)s
-backend = %(postfix_backend)s
-
-
-[postfix-rbl]
-
-filter = postfix[mode=rbl]
-port = smtp,465,submission
-logpath = %(postfix_log)s
-backend = %(postfix_backend)s
-maxretry = 1
-
-
-[sendmail-auth]
-
-port = submission,465,smtp
-logpath = %(syslog_mail)s
-backend = %(syslog_backend)s
-
-
-[sendmail-reject]
-# To use more aggressive modes set filter parameter "mode" in jail.local:
-# normal (default), extra or aggressive
-# See "tests/files/logs/sendmail-reject" or "filter.d/sendmail-reject.conf" for usage example and details.
-#mode = normal
-port = smtp,465,submission
-logpath = %(syslog_mail)s
-backend = %(syslog_backend)s
-
-
-[qmail-rbl]
-
-filter = qmail
-port = smtp,465,submission
-logpath = /service/qmail/log/main/current
-
-
-# dovecot defaults to logging to the mail syslog facility
-# but can be set by syslog_facility in the dovecot configuration.
-[dovecot]
-
-port = pop3,pop3s,imap,imaps,submission,465,sieve
-logpath = %(dovecot_log)s
-backend = %(dovecot_backend)s
-
-
-[sieve]
-
-port = smtp,465,submission
-logpath = %(dovecot_log)s
-backend = %(dovecot_backend)s
-
-
-[solid-pop3d]
-
-port = pop3,pop3s
-logpath = %(solidpop3d_log)s
-
-
-[exim]
-# see filter.d/exim.conf for further modes supported from filter:
-#mode = normal
-port = smtp,465,submission
-logpath = %(exim_main_log)s
-
-
-[exim-spam]
-
-port = smtp,465,submission
-logpath = %(exim_main_log)s
-
-
-[kerio]
-
-port = imap,smtp,imaps,465
-logpath = /opt/kerio/mailserver/store/logs/security.log
-
-
-#
-# Mail servers authenticators: might be used for smtp,ftp,imap servers, so
-# all relevant ports get banned
-#
-
-[courier-auth]
-
-port = smtp,465,submission,imap,imaps,pop3,pop3s
-logpath = %(syslog_mail)s
-backend = %(syslog_backend)s
-
-
-[postfix-sasl]
-
-filter = postfix[mode=auth]
-port = smtp,465,submission,imap,imaps,pop3,pop3s
-# You might consider monitoring /var/log/mail.warn instead if you are
-# running postfix since it would provide the same log lines at the
-# "warn" level but overall at the smaller filesize.
-logpath = %(postfix_log)s
-backend = %(postfix_backend)s
-
-
-[perdition]
-
-port = imap,imaps,pop3,pop3s
-logpath = %(syslog_mail)s
-backend = %(syslog_backend)s
-
-
-[squirrelmail]
-
-port = smtp,465,submission,imap,imap2,imaps,pop3,pop3s,http,https,socks
-logpath = /var/lib/squirrelmail/prefs/squirrelmail_access_log
-
-
-[cyrus-imap]
-
-port = imap,imaps
-logpath = %(syslog_mail)s
-backend = %(syslog_backend)s
-
-
-[uwimap-auth]
-
-port = imap,imaps
-logpath = %(syslog_mail)s
-backend = %(syslog_backend)s
-
-
-#
-#
-# DNS servers
-#
-
-
-# !!! WARNING !!!
-# Since UDP is connection-less protocol, spoofing of IP and imitation
-# of illegal actions is way too simple. Thus enabling of this filter
-# might provide an easy way for implementing a DoS against a chosen
-# victim. See
-# http://nion.modprobe.de/blog/archives/690-fail2ban-+-dns-fail.html
-# Please DO NOT USE this jail unless you know what you are doing.
-#
-# IMPORTANT: see filter.d/named-refused for instructions to enable logging
-# This jail blocks UDP traffic for DNS requests.
-# [named-refused-udp]
-#
-# filter = named-refused
-# port = domain,953
-# protocol = udp
-# logpath = /var/log/named/security.log
-
-# IMPORTANT: see filter.d/named-refused for instructions to enable logging
-# This jail blocks TCP traffic for DNS requests.
-
-[named-refused]
-
-port = domain,953
-logpath = /var/log/named/security.log
-
-
-[nsd]
-
-port = 53
-action_ = %(default/action_)s[name=%(__name__)s-tcp, protocol="tcp"]
- %(default/action_)s[name=%(__name__)s-udp, protocol="udp"]
-logpath = /var/log/nsd.log
-
-
-#
-# Miscellaneous
-#
-
-[asterisk]
-
-port = 5060,5061
-action_ = %(default/action_)s[name=%(__name__)s-tcp, protocol="tcp"]
- %(default/action_)s[name=%(__name__)s-udp, protocol="udp"]
-logpath = /var/log/asterisk/messages
-maxretry = 10
-
-
-[freeswitch]
-
-port = 5060,5061
-action_ = %(default/action_)s[name=%(__name__)s-tcp, protocol="tcp"]
- %(default/action_)s[name=%(__name__)s-udp, protocol="udp"]
-logpath = /var/log/freeswitch.log
-maxretry = 10
-
-
-# enable adminlog; it will log to a file inside znc's directory by default.
-[znc-adminlog]
-
-port = 6667
-logpath = /var/lib/znc/moddata/adminlog/znc.log
-
-
-# To log wrong MySQL access attempts add to /etc/my.cnf in [mysqld] or
-# equivalent section:
-# log-warnings = 2
-#
-# for syslog (daemon facility)
-# [mysqld_safe]
-# syslog
-#
-# for own logfile
-# [mysqld]
-# log-error=/var/log/mysqld.log
-[mysqld-auth]
-
-port = 3306
-logpath = %(mysql_log)s
-backend = %(mysql_backend)s
-
-
-# Log wrong MongoDB auth (for details see filter 'filter.d/mongodb-auth.conf')
-[mongodb-auth]
-# change port when running with "--shardsvr" or "--configsvr" runtime operation
-port = 27017
-logpath = /var/log/mongodb/mongodb.log
-
-
-# Jail for more extended banning of persistent abusers
-# !!! WARNINGS !!!
-# 1. Make sure that your loglevel specified in fail2ban.conf/.local
-# is not at DEBUG level -- which might then cause fail2ban to fall into
-# an infinite loop constantly feeding itself with non-informative lines
-# 2. Increase dbpurgeage defined in fail2ban.conf to e.g. 648000 (7.5 days)
-# to maintain entries for failed logins for sufficient amount of time
-[recidive]
-
-logpath = /var/log/fail2ban.log
-banaction = %(banaction_allports)s
-bantime = 1w
-findtime = 1d
-
-
-# Generic filter for PAM. Has to be used with action which bans all
-# ports such as iptables-allports, shorewall
-
-[pam-generic]
-# pam-generic filter can be customized to monitor specific subset of 'tty's
-banaction = %(banaction_allports)s
-logpath = %(syslog_authpriv)s
-backend = %(syslog_backend)s
-
-
-[xinetd-fail]
-
-banaction = iptables-multiport-log
-logpath = %(syslog_daemon)s
-backend = %(syslog_backend)s
-maxretry = 2
-
-
-# stunnel - need to set port for this
-[stunnel]
-
-logpath = /var/log/stunnel4/stunnel.log
-
-
-[ejabberd-auth]
-
-port = 5222
-logpath = /var/log/ejabberd/ejabberd.log
-
-
-[counter-strike]
-
-logpath = /opt/cstrike/logs/L[0-9]*.log
-tcpport = 27030,27031,27032,27033,27034,27035,27036,27037,27038,27039
-udpport = 1200,27000,27001,27002,27003,27004,27005,27006,27007,27008,27009,27010,27011,27012,27013,27014,27015
-action_ = %(default/action_)s[name=%(__name__)s-tcp, port="%(tcpport)s", protocol="tcp"]
- %(default/action_)s[name=%(__name__)s-udp, port="%(udpport)s", protocol="udp"]
-
-[softethervpn]
-port = 500,4500
-protocol = udp
-logpath = /usr/local/vpnserver/security_log/*/sec.log
-
-[gitlab]
-port = http,https
-logpath = /var/log/gitlab/gitlab-rails/application.log
-
-[grafana]
-port = http,https
-logpath = /var/log/grafana/grafana.log
-
-[bitwarden]
-port = http,https
-logpath = /home/*/bwdata/logs/identity/Identity/log.txt
-
-[centreon]
-port = http,https
-logpath = /var/log/centreon/login.log
-
-# consider low maxretry and a long bantime
-# nobody except your own Nagios server should ever probe nrpe
-[nagios]
-
-logpath = %(syslog_daemon)s ; nrpe.cfg may define a different log_facility
-backend = %(syslog_backend)s
-maxretry = 1
-
-
-[oracleims]
-# see "oracleims" filter file for configuration requirement for Oracle IMS v6 and above
-logpath = /opt/sun/comms/messaging64/log/mail.log_current
-banaction = %(banaction_allports)s
-
-[directadmin]
-logpath = /var/log/directadmin/login.log
-port = 2222
-
-[portsentry]
-logpath = /var/lib/portsentry/portsentry.history
-maxretry = 1
-
-[pass2allow-ftp]
-# this pass2allow example allows FTP traffic after successful HTTP authentication
-port = ftp,ftp-data,ftps,ftps-data
-# knocking_url variable must be overridden to some secret value in jail.local
-knocking_url = /knocking/
-filter = apache-pass[knocking_url="%(knocking_url)s"]
-# access log of the website with HTTP auth
-logpath = %(apache_access_log)s
-blocktype = RETURN
-returntype = DROP
-action = %(action_)s[blocktype=%(blocktype)s, returntype=%(returntype)s,
- actionstart_on_demand=false, actionrepair_on_unban=true]
-bantime = 1h
-maxretry = 1
-findtime = 1
-
-
-[murmur]
-# AKA mumble-server
-port = 64738
-action_ = %(default/action_)s[name=%(__name__)s-tcp, protocol="tcp"]
- %(default/action_)s[name=%(__name__)s-udp, protocol="udp"]
-logpath = /var/log/mumble-server/mumble-server.log
-
-
-[screensharingd]
-# For Mac OS Screen Sharing Service (VNC)
-logpath = /var/log/system.log
-logencoding = utf-8
-
-[haproxy-http-auth]
-# HAProxy by default doesn't log to file you'll need to set it up to forward
-# logs to a syslog server which would then write them to disk.
-# See "haproxy-http-auth" filter for a brief cautionary note when setting
-# maxretry and findtime.
-logpath = /var/log/haproxy.log
-
-[slapd]
-port = ldap,ldaps
-logpath = /var/log/slapd.log
-
-[domino-smtp]
-port = smtp,ssmtp
-logpath = /home/domino01/data/IBM_TECHNICAL_SUPPORT/console.log
-
-[phpmyadmin-syslog]
-port = http,https
-logpath = %(syslog_authpriv)s
-backend = %(syslog_backend)s
-
-
-[zoneminder]
-# Zoneminder HTTP/HTTPS web interface auth
-# Logs auth failures to apache2 error log
-port = http,https
-logpath = %(apache_error_log)s
-
-[traefik-auth]
-# to use 'traefik-auth' filter you have to configure your Traefik instance,
-# see `filter.d/traefik-auth.conf` for details and service example.
-port = http,https
-logpath = /var/log/traefik/access.log
+++ /dev/null
-# /etc/rsyslog.conf configuration file for rsyslog
-#
-# For more information install rsyslog-doc and see
-# /usr/share/doc/rsyslog-doc/html/configuration/index.html
-
-
-#################
-#### MODULES ####
-#################
-
-module(load="imuxsock") # provides support for local system logging
-module(load="imklog") # provides kernel logging support
-#module(load="immark") # provides --MARK-- message capability
-
-# provides UDP syslog reception
-#module(load="imudp")
-#input(type="imudp" port="514")
-
-# provides TCP syslog reception
-#module(load="imtcp")
-#input(type="imtcp" port="514")
-
-
-###########################
-#### GLOBAL DIRECTIVES ####
-###########################
-
-#
-# Use traditional timestamp format.
-# To enable high precision timestamps, comment out the following line.
-#
-$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
-
-#
-# Set the default permissions for all log files.
-#
-$FileOwner root
-$FileGroup adm
-$FileCreateMode 0640
-$DirCreateMode 0755
-$Umask 0022
-
-#
-# Where to place spool and state files
-#
-$WorkDirectory /var/spool/rsyslog
-
-#
-# Include all config files in /etc/rsyslog.d/
-#
-$IncludeConfig /etc/rsyslog.d/*.conf
-
-
-###############
-#### RULES ####
-###############
-
-#
-# First some standard log files. Log by facility.
-#
-auth,authpriv.* /var/log/auth.log
-*.*;auth,authpriv.none -/var/log/syslog
-#cron.* /var/log/cron.log
-daemon.* -/var/log/daemon.log
-kern.* -/var/log/kern.log
-lpr.* -/var/log/lpr.log
-mail.* -/var/log/mail.log
-user.* -/var/log/user.log
-
-#
-# Logging for the mail system. Split it up so that
-# it is easy to write scripts to parse these files.
-#
-mail.info -/var/log/mail.info
-mail.warn -/var/log/mail.warn
-mail.err /var/log/mail.err
-
-#
-# Some "catch-all" log files.
-#
-*.=debug;\
- auth,authpriv.none;\
- mail.none -/var/log/debug
-*.=info;*.=notice;*.=warn;\
- auth,authpriv.none;\
- cron,daemon.none;\
- mail.none -/var/log/messages
-
-#
-# Emergencies are sent to everybody logged in.
-#
-*.emerg :omusrmsg:*
+++ /dev/null
-# ~/.bashrc: executed by bash(1) for non-login shells.
-# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
-# for examples
-
-# If not running interactively, don't do anything
-case $- in
- *i*) ;;
- *) return;;
-esac
-
-# don't put duplicate lines or lines starting with space in the history.
-# See bash(1) for more options
-HISTCONTROL=ignoreboth
-
-# append to the history file, don't overwrite it
-shopt -s histappend
-
-# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
-HISTSIZE=1000
-HISTFILESIZE=2000
-
-# check the window size after each command and, if necessary,
-# update the values of LINES and COLUMNS.
-shopt -s checkwinsize
-
-# If set, the pattern "**" used in a pathname expansion context will
-# match all files and zero or more directories and subdirectories.
-#shopt -s globstar
-
-# make less more friendly for non-text input files, see lesspipe(1)
-#[ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)"
-
-# set variable identifying the chroot you work in (used in the prompt below)
-if [ -z "${debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then
- debian_chroot=$(cat /etc/debian_chroot)
-fi
-
-# set a fancy prompt (non-color, unless we know we "want" color)
-case "$TERM" in
- xterm-color|*-256color) color_prompt=yes;;
-esac
-
-# uncomment for a colored prompt, if the terminal has the capability; turned
-# off by default to not distract the user: the focus in a terminal window
-# should be on the output of commands, not on the prompt
-#force_color_prompt=yes
-
-if [ -n "$force_color_prompt" ]; then
- if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
- # We have color support; assume it's compliant with Ecma-48
- # (ISO/IEC-6429). (Lack of such support is extremely rare, and such
- # a case would tend to support setf rather than setaf.)
- color_prompt=yes
- else
- color_prompt=
- fi
-fi
-
-if [ "$color_prompt" = yes ]; then
- PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '
-else
- PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
-fi
-unset color_prompt force_color_prompt
-
-# If this is an xterm set the title to user@host:dir
-case "$TERM" in
-xterm*|rxvt*)
- PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1"
- ;;
-*)
- ;;
-esac
-
-# enable color support of ls and also add handy aliases
-if [ -x /usr/bin/dircolors ]; then
- test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)"
- alias ls='ls --color=auto'
- #alias dir='dir --color=auto'
- #alias vdir='vdir --color=auto'
-
- #alias grep='grep --color=auto'
- #alias fgrep='fgrep --color=auto'
- #alias egrep='egrep --color=auto'
-fi
-
-# colored GCC warnings and errors
-#export GCC_COLORS='error=01;31:warning=01;35:note=01;36:caret=01;32:locus=01:quote=01'
-
-# some more ls aliases
-#alias ll='ls -l'
-#alias la='ls -A'
-#alias l='ls -CF'
-
-# Alias definitions.
-# You may want to put all your additions into a separate file like
-# ~/.bash_aliases, instead of adding them here directly.
-# See /usr/share/doc/bash-doc/examples in the bash-doc package.
-
-if [ -f ~/.bash_aliases ]; then
- . ~/.bash_aliases
-fi
-
-# enable programmable completion features (you don't need to enable
-# this, if it's already enabled in /etc/bash.bashrc and /etc/profile
-# sources /etc/bash.bashrc).
-if ! shopt -oq posix; then
- if [ -f /usr/share/bash-completion/bash_completion ]; then
- . /usr/share/bash-completion/bash_completion
- elif [ -f /etc/bash_completion ]; then
- . /etc/bash_completion
- fi
-fi
projects / config / ns3 / etc.git / commitdiff