From 2b662c831f5f10b775aa904a68fd44568b77b39e Mon Sep 17 00:00:00 2001 From: frank Date: Tue, 17 Jan 2012 14:31:21 +0100 Subject: [PATCH] committing changes in /etc after emerge run Package changes: +net-mail/dovecot-2.0.16 --- .etckeeper | 30 ++ dovecot/conf.d/10-auth.conf | 127 ++++++++ dovecot/conf.d/10-director.conf | 56 ++++ dovecot/conf.d/10-logging.conf | 83 +++++ dovecot/conf.d/10-mail.conf | 345 +++++++++++++++++++++ dovecot/conf.d/10-master.conf | 111 +++++++ dovecot/conf.d/10-ssl.conf | 41 +++ dovecot/conf.d/15-lda.conf | 48 +++ dovecot/conf.d/20-imap.conf | 58 ++++ dovecot/conf.d/20-lmtp.conf | 16 + dovecot/conf.d/20-pop3.conf | 86 +++++ dovecot/conf.d/90-acl.conf | 19 ++ dovecot/conf.d/90-plugin.conf | 11 + dovecot/conf.d/90-quota.conf | 75 +++++ dovecot/conf.d/auth-checkpassword.conf.ext | 21 ++ dovecot/conf.d/auth-deny.conf.ext | 15 + dovecot/conf.d/auth-ldap.conf.ext | 30 ++ dovecot/conf.d/auth-master.conf.ext | 16 + dovecot/conf.d/auth-passwdfile.conf.ext | 14 + dovecot/conf.d/auth-sql.conf.ext | 30 ++ dovecot/conf.d/auth-static.conf.ext | 24 ++ dovecot/conf.d/auth-system.conf.ext | 71 +++++ dovecot/conf.d/auth-vpopmail.conf.ext | 17 + dovecot/dovecot-db.conf.ext | 11 + dovecot/dovecot-dict-sql.conf.ext | 39 +++ dovecot/dovecot-ldap.conf.ext | 140 +++++++++ dovecot/dovecot-sql.conf.ext | 136 ++++++++ dovecot/dovecot.conf | 87 ++++++ init.d/dovecot | 58 ++++ 29 files changed, 1815 insertions(+) create mode 100644 dovecot/conf.d/10-auth.conf create mode 100644 dovecot/conf.d/10-director.conf create mode 100644 dovecot/conf.d/10-logging.conf create mode 100644 dovecot/conf.d/10-mail.conf create mode 100644 dovecot/conf.d/10-master.conf create mode 100644 dovecot/conf.d/10-ssl.conf create mode 100644 dovecot/conf.d/15-lda.conf create mode 100644 dovecot/conf.d/20-imap.conf create mode 100644 dovecot/conf.d/20-lmtp.conf create mode 100644 dovecot/conf.d/20-pop3.conf create mode 100644 dovecot/conf.d/90-acl.conf create mode 100644 dovecot/conf.d/90-plugin.conf create mode 100644 dovecot/conf.d/90-quota.conf create mode 100644 dovecot/conf.d/auth-checkpassword.conf.ext create mode 100644 dovecot/conf.d/auth-deny.conf.ext create mode 100644 dovecot/conf.d/auth-ldap.conf.ext create mode 100644 dovecot/conf.d/auth-master.conf.ext create mode 100644 dovecot/conf.d/auth-passwdfile.conf.ext create mode 100644 dovecot/conf.d/auth-sql.conf.ext create mode 100644 dovecot/conf.d/auth-static.conf.ext create mode 100644 dovecot/conf.d/auth-system.conf.ext create mode 100644 dovecot/conf.d/auth-vpopmail.conf.ext create mode 100644 dovecot/dovecot-db.conf.ext create mode 100644 dovecot/dovecot-dict-sql.conf.ext create mode 100644 dovecot/dovecot-ldap.conf.ext create mode 100644 dovecot/dovecot-sql.conf.ext create mode 100644 dovecot/dovecot.conf create mode 100755 init.d/dovecot diff --git a/.etckeeper b/.etckeeper index 1fbc2df9..cf35eb79 100755 --- a/.etckeeper +++ b/.etckeeper @@ -443,6 +443,35 @@ maybe chmod 0600 './default/useradd' maybe chmod 0644 './dhcpcd.conf' maybe chmod 0644 './dispatch-conf.conf' maybe chmod 0644 './dmtab' +maybe chmod 0755 './dovecot' +maybe chmod 0755 './dovecot/conf.d' +maybe chmod 0644 './dovecot/conf.d/10-auth.conf' +maybe chmod 0644 './dovecot/conf.d/10-director.conf' +maybe chmod 0644 './dovecot/conf.d/10-logging.conf' +maybe chmod 0644 './dovecot/conf.d/10-mail.conf' +maybe chmod 0644 './dovecot/conf.d/10-master.conf' +maybe chmod 0644 './dovecot/conf.d/10-ssl.conf' +maybe chmod 0644 './dovecot/conf.d/15-lda.conf' +maybe chmod 0644 './dovecot/conf.d/20-imap.conf' +maybe chmod 0644 './dovecot/conf.d/20-lmtp.conf' +maybe chmod 0644 './dovecot/conf.d/20-pop3.conf' +maybe chmod 0644 './dovecot/conf.d/90-acl.conf' +maybe chmod 0644 './dovecot/conf.d/90-plugin.conf' +maybe chmod 0644 './dovecot/conf.d/90-quota.conf' +maybe chmod 0644 './dovecot/conf.d/auth-checkpassword.conf.ext' +maybe chmod 0644 './dovecot/conf.d/auth-deny.conf.ext' +maybe chmod 0644 './dovecot/conf.d/auth-ldap.conf.ext' +maybe chmod 0644 './dovecot/conf.d/auth-master.conf.ext' +maybe chmod 0644 './dovecot/conf.d/auth-passwdfile.conf.ext' +maybe chmod 0644 './dovecot/conf.d/auth-sql.conf.ext' +maybe chmod 0644 './dovecot/conf.d/auth-static.conf.ext' +maybe chmod 0644 './dovecot/conf.d/auth-system.conf.ext' +maybe chmod 0644 './dovecot/conf.d/auth-vpopmail.conf.ext' +maybe chmod 0644 './dovecot/dovecot-db.conf.ext' +maybe chmod 0644 './dovecot/dovecot-dict-sql.conf.ext' +maybe chmod 0600 './dovecot/dovecot-ldap.conf.ext' +maybe chmod 0600 './dovecot/dovecot-sql.conf.ext' +maybe chmod 0644 './dovecot/dovecot.conf' maybe chmod 0644 './e2fsck.conf' maybe chmod 0755 './eclean' maybe chmod 0644 './eclean/distfiles.exclude' @@ -863,6 +892,7 @@ maybe chmod 0755 './init.d/device-mapper' maybe chmod 0755 './init.d/dhcpcd' maybe chmod 0755 './init.d/dmesg' maybe chmod 0755 './init.d/dmeventd' +maybe chmod 0755 './init.d/dovecot' maybe chmod 0755 './init.d/fancontrol' maybe chmod 0755 './init.d/fsck' maybe chmod 0755 './init.d/gem_server' diff --git a/dovecot/conf.d/10-auth.conf b/dovecot/conf.d/10-auth.conf new file mode 100644 index 00000000..6e7f02ed --- /dev/null +++ b/dovecot/conf.d/10-auth.conf @@ -0,0 +1,127 @@ +## +## Authentication processes +## + +# Disable LOGIN command and all other plaintext authentications unless +# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP +# matches the local IP (ie. you're connecting from the same computer), the +# connection is considered secure and plaintext authentication is allowed. +#disable_plaintext_auth = yes + +# Authentication cache size (e.g. 10M). 0 means it's disabled. Note that +# bsdauth, PAM and vpopmail require cache_key to be set for caching to be used. +#auth_cache_size = 0 +# Time to live for cached data. After TTL expires the cached record is no +# longer used, *except* if the main database lookup returns internal failure. +# We also try to handle password changes automatically: If user's previous +# authentication was successful, but this one wasn't, the cache isn't used. +# For now this works only with plaintext authentication. +#auth_cache_ttl = 1 hour +# TTL for negative hits (user not found, password mismatch). +# 0 disables caching them completely. +#auth_cache_negative_ttl = 1 hour + +# Space separated list of realms for SASL authentication mechanisms that need +# them. You can leave it empty if you don't want to support multiple realms. +# Many clients simply use the first one listed here, so keep the default realm +# first. +#auth_realms = + +# Default realm/domain to use if none was specified. This is used for both +# SASL realms and appending @domain to username in plaintext logins. +#auth_default_realm = + +# List of allowed characters in username. If the user-given username contains +# a character not listed in here, the login automatically fails. This is just +# an extra check to make sure user can't exploit any potential quote escaping +# vulnerabilities with SQL/LDAP databases. If you want to allow all characters, +# set this value to empty. +#auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ + +# Username character translations before it's looked up from databases. The +# value contains series of from -> to characters. For example "#@/@" means +# that '#' and '/' characters are translated to '@'. +#auth_username_translation = + +# Username formatting before it's looked up from databases. You can use +# the standard variables here, eg. %Lu would lowercase the username, %n would +# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into +# "-AT-". This translation is done after auth_username_translation changes. +#auth_username_format = + +# If you want to allow master users to log in by specifying the master +# username within the normal username string (ie. not using SASL mechanism's +# support for it), you can specify the separator character here. The format +# is then . UW-IMAP uses "*" as the +# separator, so that could be a good choice. +#auth_master_user_separator = + +# Username to use for users logging in with ANONYMOUS SASL mechanism +#auth_anonymous_username = anonymous + +# Maximum number of dovecot-auth worker processes. They're used to execute +# blocking passdb and userdb queries (eg. MySQL and PAM). They're +# automatically created and destroyed as needed. +#auth_worker_max_count = 30 + +# Host name to use in GSSAPI principal names. The default is to use the +# name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab +# entries. +#auth_gssapi_hostname = + +# Kerberos keytab to use for the GSSAPI mechanism. Will use the system +# default (usually /etc/krb5.keytab) if not specified. You may need to change +# the auth service to run as root to be able to read this file. +#auth_krb5_keytab = + +# Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and +# ntlm_auth helper. +#auth_use_winbind = no + +# Path for Samba's ntlm_auth helper binary. +#auth_winbind_helper_path = /usr/bin/ntlm_auth + +# Time to delay before replying to failed authentications. +#auth_failure_delay = 2 secs + +# Require a valid SSL client certificate or the authentication fails. +#auth_ssl_require_client_cert = no + +# Take the username from client's SSL certificate, using +# X509_NAME_get_text_by_NID() which returns the subject's DN's +# CommonName. +#auth_ssl_username_from_cert = no + +# Space separated list of wanted authentication mechanisms: +# plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey +# gss-spnego +# NOTE: See also disable_plaintext_auth setting. +auth_mechanisms = plain + +## +## Password and user databases +## + +# +# Password database is used to verify user's password (and nothing more). +# You can have multiple passdbs and userdbs. This is useful if you want to +# allow both system users (/etc/passwd) and virtual users to login without +# duplicating the system users into virtual database. +# +# +# +# User database specifies where mails are located and what user/group IDs +# own them. For single-UID configuration use "static" userdb. +# +# + +#!include auth-deny.conf.ext +#!include auth-master.conf.ext + +!include auth-system.conf.ext +!include auth-sql.conf.ext +!include auth-ldap.conf.ext +#!include auth-passwdfile.conf.ext +#!include auth-checkpassword.conf.ext +#!include auth-vpopmail.conf.ext +#!include auth-static.conf.ext diff --git a/dovecot/conf.d/10-director.conf b/dovecot/conf.d/10-director.conf new file mode 100644 index 00000000..d2d76647 --- /dev/null +++ b/dovecot/conf.d/10-director.conf @@ -0,0 +1,56 @@ +## +## Director-specific settings. +## + +# Director can be used by Dovecot proxy to keep a temporary user -> mail server +# mapping. As long as user has simultaneous connections, the user is always +# redirected to the same server. Each proxy server is running its own director +# process, and the directors are communicating the state to each others. +# Directors are mainly useful with NFS-like setups. + +# List of IPs or hostnames to all director servers, including ourself. +# Ports can be specified as ip:port. The default port is the same as +# what director service's inet_listener is using. +#director_servers = + +# List of IPs or hostnames to all backend mail servers. Ranges are allowed +# too, like 10.0.0.10-10.0.0.30. +#director_mail_servers = + +# How long to redirect users to a specific server after it no longer has +# any connections. +#director_user_expire = 15 min + +# TCP/IP port that accepts doveadm connections (instead of director connections) +# If you enable this, you'll also need to add inet_listener for the port. +#director_doveadm_port = 0 + +# To enable director service, uncomment the modes and assign a port. +service director { + unix_listener login/director { + #mode = 0666 + } + fifo_listener login/proxy-notify { + #mode = 0666 + } + unix_listener director-userdb { + #mode = 0600 + } + inet_listener { + #port = + } +} + +# Enable director for the wanted login services by telling them to +# connect to director socket instead of the default login socket: +service imap-login { + #executable = imap-login director +} +service pop3-login { + #executable = pop3-login director +} + +# Enable director for LMTP proxying: +protocol lmtp { + #auth_socket_path = director-userdb +} diff --git a/dovecot/conf.d/10-logging.conf b/dovecot/conf.d/10-logging.conf new file mode 100644 index 00000000..ac6c8273 --- /dev/null +++ b/dovecot/conf.d/10-logging.conf @@ -0,0 +1,83 @@ +## +## Log destination. +## + +# Log file to use for error messages. "syslog" logs to syslog, +# /dev/stderr logs to stderr. +#log_path = syslog + +# Log file to use for informational messages. Defaults to log_path. +#info_log_path = +# Log file to use for debug messages. Defaults to info_log_path. +#debug_log_path = + +# Syslog facility to use if you're logging to syslog. Usually if you don't +# want to use "mail", you'll use local0..local7. Also other standard +# facilities are supported. +#syslog_facility = mail + +## +## Logging verbosity and debugging. +## + +# Log unsuccessful authentication attempts and the reasons why they failed. +#auth_verbose = no + +# In case of password mismatches, log the attempted password. Valid values are +# no, plain and sha1. sha1 can be useful for detecting brute force password +# attempts vs. user simply trying the same password over and over again. +#auth_verbose_passwords = no + +# Even more verbose logging for debugging purposes. Shows for example SQL +# queries. +#auth_debug = no + +# In case of password mismatches, log the passwords and used scheme so the +# problem can be debugged. Enabling this also enables auth_debug. +#auth_debug_passwords = no + +# Enable mail process debugging. This can help you figure out why Dovecot +# isn't finding your mails. +#mail_debug = no + +# Show protocol level SSL errors. +#verbose_ssl = no + +# mail_log plugin provides more event logging for mail processes. +plugin { + # Events to log. Also available: flag_change append + #mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename + # Available fields: uid, box, msgid, from, subject, size, vsize, flags + # size and vsize are available only for expunge and copy events. + #mail_log_fields = uid box msgid size +} + +## +## Log formatting. +## + +# Prefix for each line written to log file. % codes are in strftime(3) +# format. +#log_timestamp = "%b %d %H:%M:%S " + +# Space-separated list of elements we want to log. The elements which have +# a non-empty variable value are joined together to form a comma-separated +# string. +#login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c + +# Login log format. %$ contains login_log_format_elements string, %s contains +# the data we want to log. +#login_log_format = %$: %s + +# Log prefix for mail processes. See doc/wiki/Variables.txt for list of +# possible variables you can use. +#mail_log_prefix = "%s(%u): " + +# Format to use for logging mail deliveries. You can use variables: +# %$ - Delivery status message (e.g. "saved to INBOX") +# %m - Message-ID +# %s - Subject +# %f - From address +# %p - Physical size +# %w - Virtual size +#deliver_log_format = msgid=%m: %$ diff --git a/dovecot/conf.d/10-mail.conf b/dovecot/conf.d/10-mail.conf new file mode 100644 index 00000000..6ed42e31 --- /dev/null +++ b/dovecot/conf.d/10-mail.conf @@ -0,0 +1,345 @@ +## +## Mailbox locations and namespaces +## + +# Location for users' mailboxes. The default is empty, which means that Dovecot +# tries to find the mailboxes automatically. This won't work if the user +# doesn't yet have any mail, so you should explicitly tell Dovecot the full +# location. +# +# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u) +# isn't enough. You'll also need to tell Dovecot where the other mailboxes are +# kept. This is called the "root mail directory", and it must be the first +# path given in the mail_location setting. +# +# There are a few special variables you can use, eg.: +# +# %u - username +# %n - user part in user@domain, same as %u if there's no domain +# %d - domain part in user@domain, empty if there's no domain +# %h - home directory +# +# See doc/wiki/Variables.txt for full list. Some examples: +# +# mail_location = maildir:~/Maildir +# mail_location = mbox:~/mail:INBOX=/var/mail/%u +# mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n +# +# +# +mail_location = maildir:~/.maildir + +# If you need to set multiple mailbox locations or want to change default +# namespace settings, you can do it by defining namespace sections. +# +# You can have private, shared and public namespaces. Private namespaces +# are for user's personal mails. Shared namespaces are for accessing other +# users' mailboxes that have been shared. Public namespaces are for shared +# mailboxes that are managed by sysadmin. If you create any shared or public +# namespaces you'll typically want to enable ACL plugin also, otherwise all +# users can access all the shared mailboxes, assuming they have permissions +# on filesystem level to do so. +# +# REMEMBER: If you add any namespaces, the default namespace must be added +# explicitly, ie. mail_location does nothing unless you have a namespace +# without a location setting. Default namespace is simply done by having a +# namespace with empty prefix. +#namespace { + # Namespace type: private, shared or public + #type = private + + # Hierarchy separator to use. You should use the same separator for all + # namespaces or some clients get confused. '/' is usually a good one. + # The default however depends on the underlying mail storage format. + #separator = + + # Prefix required to access this namespace. This needs to be different for + # all namespaces. For example "Public/". + #prefix = + + # Physical location of the mailbox. This is in same format as + # mail_location, which is also the default for it. + #location = + + # There can be only one INBOX, and this setting defines which namespace + # has it. + #inbox = no + + # If namespace is hidden, it's not advertised to clients via NAMESPACE + # extension. You'll most likely also want to set list=no. This is mostly + # useful when converting from another server with different namespaces which + # you want to deprecate but still keep working. For example you can create + # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/". + #hidden = no + + # Show the mailboxes under this namespace with LIST command. This makes the + # namespace visible for clients that don't support NAMESPACE extension. + # "children" value lists child mailboxes, but hides the namespace prefix. + #list = yes + + # Namespace handles its own subscriptions. If set to "no", the parent + # namespace handles them (empty prefix should always have this as "yes") + #subscriptions = yes +#} + +# Example shared namespace configuration +#namespace { + #type = shared + #separator = / + + # Mailboxes are visible under "shared/user@domain/" + # %%n, %%d and %%u are expanded to the destination user. + #prefix = shared/%%u/ + + # Mail location for other users' mailboxes. Note that %variables and ~/ + # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the + # destination user's data. + #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u + + # Use the default namespace for saving subscriptions. + #subscriptions = no + + # List the shared/ namespace only if there are visible shared mailboxes. + #list = children +#} + +# System user and group used to access mails. If you use multiple, userdb +# can override these by returning uid or gid fields. You can use either numbers +# or names. +#mail_uid = +#mail_gid = + +# Group to enable temporarily for privileged operations. Currently this is +# used only with INBOX when either its initial creation or dotlocking fails. +# Typically this is set to "mail" to give access to /var/mail. +#mail_privileged_group = + +# Grant access to these supplementary groups for mail processes. Typically +# these are used to set up access to shared mailboxes. Note that it may be +# dangerous to set these if users can create symlinks (e.g. if "mail" group is +# set here, ln -s /var/mail ~/mail/var could allow a user to delete others' +# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it). +#mail_access_groups = + +# Allow full filesystem access to clients. There's no access checks other than +# what the operating system does for the active UID/GID. It works with both +# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/ +# or ~user/. +#mail_full_filesystem_access = no + +## +## Mail processes +## + +# Don't use mmap() at all. This is required if you store indexes to shared +# filesystems (NFS or clustered filesystem). +#mmap_disable = no + +# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL +# since version 3, so this should be safe to use nowadays by default. +#dotlock_use_excl = yes + +# When to use fsync() or fdatasync() calls: +# optimized (default): Whenever necessary to avoid losing important data +# always: Useful with e.g. NFS when write()s are delayed +# never: Never use it (best performance, but crashes can lose data) +#mail_fsync = optimized + +# Mail storage exists in NFS. Set this to yes to make Dovecot flush NFS caches +# whenever needed. If you're using only a single mail server this isn't needed. +#mail_nfs_storage = no +# Mail index files also exist in NFS. Setting this to yes requires +# mmap_disable=yes and fsync_disable=no. +#mail_nfs_index = no + +# Locking method for index files. Alternatives are fcntl, flock and dotlock. +# Dotlocking uses some tricks which may create more disk I/O than other locking +# methods. NFS users: flock doesn't work, remember to change mmap_disable. +#lock_method = fcntl + +# Directory in which LDA/LMTP temporarily stores incoming mails >128 kB. +#mail_temp_dir = /tmp + +# Valid UID range for users, defaults to 500 and above. This is mostly +# to make sure that users can't log in as daemons or other system users. +# Note that denying root logins is hardcoded to dovecot binary and can't +# be done even if first_valid_uid is set to 0. +#first_valid_uid = 500 +#last_valid_uid = 0 + +# Valid GID range for users, defaults to non-root/wheel. Users having +# non-valid GID as primary group ID aren't allowed to log in. If user +# belongs to supplementary groups with non-valid GIDs, those groups are +# not set. +#first_valid_gid = 1 +#last_valid_gid = 0 + +# Maximum allowed length for mail keyword name. It's only forced when trying +# to create new keywords. +#mail_max_keyword_length = 50 + +# ':' separated list of directories under which chrooting is allowed for mail +# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too). +# This setting doesn't affect login_chroot, mail_chroot or auth chroot +# settings. If this setting is empty, "/./" in home dirs are ignored. +# WARNING: Never add directories here which local users can modify, that +# may lead to root exploit. Usually this should be done only if you don't +# allow shell access for users. +#valid_chroot_dirs = + +# Default chroot directory for mail processes. This can be overridden for +# specific users in user database by giving /./ in user's home directory +# (eg. /home/./user chroots into /home). Note that usually there is no real +# need to do chrooting, Dovecot doesn't allow users to access files outside +# their mail directory anyway. If your home directories are prefixed with +# the chroot directory, append "/." to mail_chroot. +#mail_chroot = + +# UNIX socket path to master authentication server to find users. +# This is used by imap (for shared users) and lda. +#auth_socket_path = /var/run/dovecot/auth-userdb + +# Directory where to look up mail plugins. +#mail_plugin_dir = /usr/lib/dovecot + +# Space separated list of plugins to load for all services. Plugins specific to +# IMAP, LDA, etc. are added to this list in their own .conf files. +#mail_plugins = + +## +## Mailbox handling optimizations +## + +# The minimum number of mails in a mailbox before updates are done to cache +# file. This allows optimizing Dovecot's behavior to do less disk writes at +# the cost of more disk reads. +#mail_cache_min_mail_count = 0 + +# When IDLE command is running, mailbox is checked once in a while to see if +# there are any new mails or other changes. This setting defines the minimum +# time to wait between those checks. Dovecot can also use dnotify, inotify and +# kqueue to find out immediately when changes occur. +#mailbox_idle_check_interval = 30 secs + +# Save mails with CR+LF instead of plain LF. This makes sending those mails +# take less CPU, especially with sendfile() syscall with Linux and FreeBSD. +# But it also creates a bit more disk I/O which may just make it slower. +# Also note that if other software reads the mboxes/maildirs, they may handle +# the extra CRs wrong and cause problems. +#mail_save_crlf = no + +## +## Maildir-specific settings +## + +# By default LIST command returns all entries in maildir beginning with a dot. +# Enabling this option makes Dovecot return only entries which are directories. +# This is done by stat()ing each entry, so it causes more disk I/O. +# (For systems setting struct dirent->d_type, this check is free and it's +# done always regardless of this setting) +#maildir_stat_dirs = no + +# When copying a message, do it with hard links whenever possible. This makes +# the performance much better, and it's unlikely to have any side effects. +#maildir_copy_with_hardlinks = yes + +# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only +# when its mtime changes unexpectedly or when we can't find the mail otherwise. +#maildir_very_dirty_syncs = no + +## +## mbox-specific settings +## + +# Which locking methods to use for locking mbox. There are four available: +# dotlock: Create .lock file. This is the oldest and most NFS-safe +# solution. If you want to use /var/mail/ like directory, the users +# will need write access to that directory. +# dotlock_try: Same as dotlock, but if it fails because of permissions or +# because there isn't enough disk space, just skip it. +# fcntl : Use this if possible. Works with NFS too if lockd is used. +# flock : May not exist in all systems. Doesn't work with NFS. +# lockf : May not exist in all systems. Doesn't work with NFS. +# +# You can use multiple locking methods; if you do the order they're declared +# in is important to avoid deadlocks if other MTAs/MUAs are using multiple +# locking methods as well. Some operating systems don't allow using some of +# them simultaneously. +#mbox_read_locks = fcntl +#mbox_write_locks = dotlock fcntl + +# Maximum time to wait for lock (all of them) before aborting. +#mbox_lock_timeout = 5 mins + +# If dotlock exists but the mailbox isn't modified in any way, override the +# lock file after this much time. +#mbox_dotlock_change_timeout = 2 mins + +# When mbox changes unexpectedly we have to fully read it to find out what +# changed. If the mbox is large this can take a long time. Since the change +# is usually just a newly appended mail, it'd be faster to simply read the +# new mails. If this setting is enabled, Dovecot does this but still safely +# fallbacks to re-reading the whole mbox file whenever something in mbox isn't +# how it's expected to be. The only real downside to this setting is that if +# some other MUA changes message flags, Dovecot doesn't notice it immediately. +# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK +# commands. +#mbox_dirty_syncs = yes + +# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE, +# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored. +#mbox_very_dirty_syncs = no + +# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK +# commands and when closing the mailbox). This is especially useful for POP3 +# where clients often delete all mails. The downside is that our changes +# aren't immediately visible to other MUAs. +#mbox_lazy_writes = yes + +# If mbox size is smaller than this (e.g. 100k), don't write index files. +# If an index file already exists it's still read, just not updated. +#mbox_min_index_size = 0 + +## +## mdbox-specific settings +## + +# Maximum dbox file size until it's rotated. +#mdbox_rotate_size = 2M + +# Maximum dbox file age until it's rotated. Typically in days. Day begins +# from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled. +#mdbox_rotate_interval = 1d + +# When creating new mdbox files, immediately preallocate their size to +# mdbox_rotate_size. This setting currently works only in Linux with some +# filesystems (ext4, xfs). +#mdbox_preallocate_space = no + +## +## Mail attachments +## + +# sdbox and mdbox support saving mail attachments to external files, which +# also allows single instance storage for them. Other backends don't support +# this for now. + +# WARNING: This feature hasn't been tested much yet. Use at your own risk. + +# Directory root where to store mail attachments. Disabled, if empty. +#mail_attachment_dir = + +# Attachments smaller than this aren't saved externally. It's also possible to +# write a plugin to disable saving specific attachments externally. +#mail_attachment_min_size = 128k + +# Filesystem backend to use for saving attachments: +# posix : No SiS done by Dovecot (but this might help FS's own deduplication) +# sis posix : SiS with immediate byte-by-byte comparison during saving +# sis-queue posix : SiS with delayed comparison and deduplication +#mail_attachment_fs = sis posix + +# Hash format to use in attachment filenames. You can add any text and +# variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}. +# Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits +#mail_attachment_hash = %{sha1} diff --git a/dovecot/conf.d/10-master.conf b/dovecot/conf.d/10-master.conf new file mode 100644 index 00000000..f0e79abc --- /dev/null +++ b/dovecot/conf.d/10-master.conf @@ -0,0 +1,111 @@ +#default_process_limit = 100 +#default_client_limit = 1000 + +# Default VSZ (virtual memory size) limit for service processes. This is mainly +# intended to catch and kill processes that leak memory before they eat up +# everything. +#default_vsz_limit = 256M + +# Login user is internally used by login processes. This is the most untrusted +# user in Dovecot system. It shouldn't have access to anything at all. +#default_login_user = dovenull + +# Internal user is used by unprivileged processes. It should be separate from +# login user, so that login processes can't disturb other processes. +#default_internal_user = dovecot + +service imap-login { + inet_listener imap { + #port = 143 + } + inet_listener imaps { + #port = 993 + #ssl = yes + } + + # Number of connections to handle before starting a new process. Typically + # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0 + # is faster. + #service_count = 1 + + # Number of processes to always keep waiting for more connections. + #process_min_avail = 0 + + # If you set service_count=0, you probably need to grow this. + #vsz_limit = 64M +} + +service pop3-login { + inet_listener pop3 { + #port = 110 + } + inet_listener pop3s { + #port = 995 + #ssl = yes + } +} + +service lmtp { + unix_listener lmtp { + #mode = 0666 + } + + # Create inet listener only if you can't use the above UNIX socket + #inet_listener lmtp { + # Avoid making LMTP visible for the entire internet + #address = + #port = + #} +} + +service imap { + # Most of the memory goes to mmap()ing files. You may need to increase this + # limit if you have huge mailboxes. + #vsz_limit = 256M + + # Max. number of IMAP processes (connections) + #process_limit = 1024 +} + +service pop3 { + # Max. number of POP3 processes (connections) + #process_limit = 1024 +} + +service auth { + # auth_socket_path points to this userdb socket by default. It's typically + # used by dovecot-lda, doveadm, possibly imap process, etc. Its default + # permissions make it readable only by root, but you may need to relax these + # permissions. Users that have access to this socket are able to get a list + # of all usernames and get results of everyone's userdb lookups. + unix_listener auth-userdb { + #mode = 0600 + #user = + #group = + } + + # Postfix smtp-auth + #unix_listener /var/spool/postfix/private/auth { + # mode = 0666 + #} + + # Auth process is run as this user. + #user = $default_internal_user +} + +service auth-worker { + # Auth worker process is run as root by default, so that it can access + # /etc/shadow. If this isn't necessary, the user should be changed to + # $default_internal_user. + #user = root +} + +service dict { + # If dict proxy is used, mail processes should have access to its socket. + # For example: mode=0660, group=vmail and global mail_access_groups=vmail + unix_listener dict { + #mode = 0600 + #user = + #group = + } +} diff --git a/dovecot/conf.d/10-ssl.conf b/dovecot/conf.d/10-ssl.conf new file mode 100644 index 00000000..975f6e40 --- /dev/null +++ b/dovecot/conf.d/10-ssl.conf @@ -0,0 +1,41 @@ +## +## SSL settings +## + +# SSL/TLS support: yes, no, required. +ssl = yes + +# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before +# dropping root privileges, so keep the key file unreadable by anyone but +# root. Included doc/mkcert.sh can be used to easily generate self-signed +# certificate, just make sure to update the domains in dovecot-openssl.cnf +ssl_cert = . +#postmaster_address = + +# Hostname to use in various parts of sent mails, eg. in Message-Id. +# Default is the system's real hostname. +#hostname = + +# If user is over quota, return with temporary failure instead of +# bouncing the mail. +#quota_full_tempfail = no + +# Binary to use for sending mails. +#sendmail_path = /usr/sbin/sendmail + +# If non-empty, send mails via this SMTP host[:port] instead of sendmail. +#submission_host = + +# Subject: header to use for rejection mails. You can use the same variables +# as for rejection_reason below. +#rejection_subject = Rejected: %s + +# Human readable error message for rejection mails. You can use variables: +# %n = CRLF, %r = reason, %s = original subject, %t = recipient +#rejection_reason = Your message to <%t> was automatically rejected:%n%r + +# Delimiter character between local-part and detail in email address. +#recipient_delimiter = + + +# Header where the original recipient address (SMTP's RCPT TO: address) is taken +# from if not available elsewhere. With dovecot-lda -a parameter overrides this. +# A commonly used header for this is X-Original-To. +#lda_original_recipient_header = + +# Should saving a mail to a nonexistent mailbox automatically create it? +#lda_mailbox_autocreate = no + +# Should automatically created mailboxes be also automatically subscribed? +#lda_mailbox_autosubscribe = no + +protocol lda { + # Space separated list of plugins to load (default is global mail_plugins). + #mail_plugins = $mail_plugins +} diff --git a/dovecot/conf.d/20-imap.conf b/dovecot/conf.d/20-imap.conf new file mode 100644 index 00000000..99f78339 --- /dev/null +++ b/dovecot/conf.d/20-imap.conf @@ -0,0 +1,58 @@ +## +## IMAP specific settings +## + +protocol imap { + # Maximum IMAP command line length. Some clients generate very long command + # lines with huge mailboxes, so you may need to raise this if you get + # "Too long argument" or "IMAP command line too large" errors often. + #imap_max_line_length = 64k + + # Maximum number of IMAP connections allowed for a user from each IP address. + # NOTE: The username is compared case-sensitively. + #mail_max_userip_connections = 10 + + # Space separated list of plugins to load (default is global mail_plugins). + #mail_plugins = $mail_plugins + + # IMAP logout format string: + # %i - total number of bytes read from client + # %o - total number of bytes sent to client + #imap_logout_format = bytes=%i/%o + + # Override the IMAP CAPABILITY response. If the value begins with '+', + # add the given capabilities on top of the defaults (e.g. +XFOO XBAR). + #imap_capability = + + # How long to wait between "OK Still here" notifications when client is + # IDLEing. + #imap_idle_notify_interval = 2 mins + + # ID field names and values to send to clients. Using * as the value makes + # Dovecot use the default value. The following fields have default values + # currently: name, version, os, os-version, support-url, support-email. + #imap_id_send = + + # ID fields sent by client to log. * means everything. + #imap_id_log = + + # Workarounds for various client bugs: + # delay-newmail: + # Send EXISTS/RECENT new mail notifications only when replying to NOOP + # and CHECK commands. Some clients ignore them otherwise, for example OSX + # Mail (= 2.1.4) : %v.%u + # Dovecot v0.99.x : %v.%u + # tpop3d : %Mf + # + # Note that Outlook 2003 seems to have problems with %v.%u format which was + # Dovecot's default, so if you're building a new server it would be a good + # idea to change this. %08Xu%08Xv should be pretty fail-safe. + # + #pop3_uidl_format = %08Xu%08Xv + + # Permanently save UIDLs sent to POP3 clients, so pop3_uidl_format changes + # won't change those UIDLs. Currently this works only with Maildir. + #pop3_save_uidl = no + + # POP3 logout format string: + # %i - total number of bytes read from client + # %o - total number of bytes sent to client + # %t - number of TOP commands + # %p - number of bytes sent to client as a result of TOP command + # %r - number of RETR commands + # %b - number of bytes sent to client as a result of RETR command + # %d - number of deleted messages + # %m - number of messages (before deletion) + # %s - mailbox size in bytes (before deletion) + # %u - old/new UIDL hash. may help finding out if UIDLs changed unexpectedly + #pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s + + # Maximum number of POP3 connections allowed for a user from each IP address. + # NOTE: The username is compared case-sensitively. + #mail_max_userip_connections = 10 + + # Space separated list of plugins to load (default is global mail_plugins). + #mail_plugins = $mail_plugins + + # Workarounds for various client bugs: + # outlook-no-nuls: + # Outlook and Outlook Express hang if mails contain NUL characters. + # This setting replaces them with 0x80 character. + # oe-ns-eoh: + # Outlook Express and Netscape Mail breaks if end of headers-line is + # missing. This option simply sends it if it's missing. + # The list is space-separated. + #pop3_client_workarounds = +} diff --git a/dovecot/conf.d/90-acl.conf b/dovecot/conf.d/90-acl.conf new file mode 100644 index 00000000..f0c0e7a5 --- /dev/null +++ b/dovecot/conf.d/90-acl.conf @@ -0,0 +1,19 @@ +## +## Mailbox access control lists. +## + +# vfile backend reads ACLs from "dovecot-acl" file from mail directory. +# You can also optionally give a global ACL directory path where ACLs are +# applied to all users' mailboxes. The global ACL directory contains +# one file for each mailbox, eg. INBOX or sub.mailbox. cache_secs parameter +# specifies how many seconds to wait between stat()ing dovecot-acl file +# to see if it changed. +plugin { + #acl = vfile:/etc/dovecot/global-acls:cache_secs=300 +} + +# To let users LIST mailboxes shared by other users, Dovecot needs a +# shared mailbox dictionary. For example: +plugin { + #acl_shared_dict = file:/var/lib/dovecot/shared-mailboxes +} diff --git a/dovecot/conf.d/90-plugin.conf b/dovecot/conf.d/90-plugin.conf new file mode 100644 index 00000000..8c8fccf4 --- /dev/null +++ b/dovecot/conf.d/90-plugin.conf @@ -0,0 +1,11 @@ +## +## Plugin settings +## + +# All wanted plugins must be listed in mail_plugins setting before any of the +# settings take effect. See for list of plugins and +# their configuration. Note that %variable expansion is done for all values. + +plugin { + #setting_name = value +} diff --git a/dovecot/conf.d/90-quota.conf b/dovecot/conf.d/90-quota.conf new file mode 100644 index 00000000..6984da6f --- /dev/null +++ b/dovecot/conf.d/90-quota.conf @@ -0,0 +1,75 @@ +## +## Quota configuration. +## + +# Note that you also have to enable quota plugin in mail_plugins setting. +# + +## +## Quota limits +## + +# Quota limits are set using "quota_rule" parameters. To get per-user quota +# limits, you can set/override them by returning "quota_rule" extra field +# from userdb. It's also possible to give mailbox-specific limits, for example +# to give additional 100 MB when saving to Trash: + +plugin { + #quota_rule = *:storage=1G + #quota_rule2 = Trash:storage=+100M +} + +## +## Quota warnings +## + +# You can execute a given command when user exceeds a specified quota limit. +# Each quota root has separate limits. Only the command for the first +# exceeded limit is excecuted, so put the highest limit first. +# The commands are executed via script service by connecting to the named +# UNIX socket (quota-warning below). +# Note that % needs to be escaped as %%, otherwise "% " expands to empty. + +plugin { + #quota_warning = storage=95%% quota-warning 95 %u + #quota_warning2 = storage=80%% quota-warning 80 %u +} + +# Example quota-warning service. The unix listener's permissions should be +# set in a way that mail processes can connect to it. Below example assumes +# that mail processes run as vmail user. If you use mode=0666, all system users +# can generate quota warnings to anyone. +#service quota-warning { +# executable = script /usr/local/bin/quota-warning.sh +# user = dovecot +# unix_listener quota-warning { +# user = vmail +# } +#} + +## +## Quota backends +## + +# Multiple backends are supported: +# dirsize: Find and sum all the files found from mail directory. +# Extremely SLOW with Maildir. It'll eat your CPU and disk I/O. +# dict: Keep quota stored in dictionary (eg. SQL) +# maildir: Maildir++ quota +# fs: Read-only support for filesystem quota + +plugin { + #quota = dirsize:User quota + #quota = maildir:User quota + #quota = dict:User quota::proxy::quota + #quota = fs:User quota +} + +# Multiple quota roots are also possible, for example this gives each user +# their own 100MB quota and one shared 1GB quota within the domain: +plugin { + #quota = dict:user::proxy::quota + #quota2 = dict:domain:%d:proxy::quota_domain + #quota_rule = *:storage=102400 + #quota2_rule = *:storage=1048576 +} diff --git a/dovecot/conf.d/auth-checkpassword.conf.ext b/dovecot/conf.d/auth-checkpassword.conf.ext new file mode 100644 index 00000000..02efae33 --- /dev/null +++ b/dovecot/conf.d/auth-checkpassword.conf.ext @@ -0,0 +1,21 @@ +# Authentication for checkpassword users. Included from auth.conf. +# +# + +passdb { + driver = checkpassword + args = /usr/bin/checkpassword +} + +# passdb lookup should return also userdb info +userdb { + driver = prefetch +} + +# Standard checkpassword doesn't support direct userdb lookups. +# If you need checkpassword userdb, the checkpassword must support +# Dovecot-specific extensions. +#userdb { +# driver = checkpassword +# args = /usr/bin/checkpassword +#} diff --git a/dovecot/conf.d/auth-deny.conf.ext b/dovecot/conf.d/auth-deny.conf.ext new file mode 100644 index 00000000..f2d897d1 --- /dev/null +++ b/dovecot/conf.d/auth-deny.conf.ext @@ -0,0 +1,15 @@ +# Deny access for users. Included from auth.conf. + +# Users can be (temporarily) disabled by adding a passdb with deny=yes. +# If the user is found from that database, authentication will fail. +# The deny passdb should always be specified before others, so it gets +# checked first. + +# Example deny passdb using passwd-file. You can use any passdb though. +passdb { + driver = passwd-file + deny = yes + + # File contains a list of usernames, one per line + args = /etc/dovecot/deny-users +} diff --git a/dovecot/conf.d/auth-ldap.conf.ext b/dovecot/conf.d/auth-ldap.conf.ext new file mode 100644 index 00000000..c5852801 --- /dev/null +++ b/dovecot/conf.d/auth-ldap.conf.ext @@ -0,0 +1,30 @@ +# Authentication for LDAP users. Included from auth.conf. +# +# + +passdb { + driver = ldap + + # Path for LDAP configuration file, see example-config/dovecot-ldap.conf.ext + args = /etc/dovecot/dovecot-ldap.conf.ext +} + +# "prefetch" user database means that the passdb already provided the +# needed information and there's no need to do a separate userdb lookup. +# +#userdb { +# driver = prefetch +#} + +userdb { + driver = ldap + args = /etc/dovecot/dovecot-ldap.conf.ext +} + +# If you don't have any user-specific settings, you can avoid the userdb LDAP +# lookup by using userdb static instead of userdb ldap, for example: +# +#userdb { + #driver = static + #args = uid=vmail gid=vmail home=/var/vmail/%u +#} diff --git a/dovecot/conf.d/auth-master.conf.ext b/dovecot/conf.d/auth-master.conf.ext new file mode 100644 index 00000000..8e5107fd --- /dev/null +++ b/dovecot/conf.d/auth-master.conf.ext @@ -0,0 +1,16 @@ +# Authentication for master users. Included from auth.conf. + +# By adding master=yes setting inside a passdb you make the passdb a list +# of "master users", who can log in as anyone else. +# + +# Example master user passdb using passwd-file. You can use any passdb though. +passdb { + driver = passwd-file + master = yes + args = /etc/dovecot/master-users + + # Unless you're using PAM, you probably still want the destination user to + # be looked up from passdb that it really exists. pass=yes does that. + pass = yes +} diff --git a/dovecot/conf.d/auth-passwdfile.conf.ext b/dovecot/conf.d/auth-passwdfile.conf.ext new file mode 100644 index 00000000..3f57ceeb --- /dev/null +++ b/dovecot/conf.d/auth-passwdfile.conf.ext @@ -0,0 +1,14 @@ +# Authentication for passwd-file users. Included from auth.conf. +# +# passwd-like file with specified location. +# + +passdb { + driver = passwd-file + args = scheme=CRYPT username_format=%u /etc/dovecot/users +} + +userdb { + driver = passwd-file + args = username_format=%u /etc/dovecot/users +} diff --git a/dovecot/conf.d/auth-sql.conf.ext b/dovecot/conf.d/auth-sql.conf.ext new file mode 100644 index 00000000..9ba585b5 --- /dev/null +++ b/dovecot/conf.d/auth-sql.conf.ext @@ -0,0 +1,30 @@ +# Authentication for SQL users. Included from auth.conf. +# +# + +passdb { + driver = sql + + # Path for SQL configuration file, see example-config/dovecot-sql.conf.ext + args = /etc/dovecot/dovecot-sql.conf.ext +} + +# "prefetch" user database means that the passdb already provided the +# needed information and there's no need to do a separate userdb lookup. +# +#userdb { +# driver = prefetch +#} + +userdb { + driver = sql + args = /etc/dovecot/dovecot-sql.conf.ext +} + +# If you don't have any user-specific settings, you can avoid the user_query +# by using userdb static instead of userdb sql, for example: +# +#userdb { + #driver = static + #args = uid=vmail gid=vmail home=/var/vmail/%u +#} diff --git a/dovecot/conf.d/auth-static.conf.ext b/dovecot/conf.d/auth-static.conf.ext new file mode 100644 index 00000000..238d5170 --- /dev/null +++ b/dovecot/conf.d/auth-static.conf.ext @@ -0,0 +1,24 @@ +# Static passdb. Included from auth.conf. + +# This can be used for situations where Dovecot doesn't need to verify the +# username or the password, or if there is a single password for all users: +# +# - proxy frontend, where the backend verifies the password +# - proxy backend, where the frontend already verified the password +# - authentication with SSL certificates +# - simple testing + +#passdb { +# driver = static +# args = proxy=y host=%1Mu.example.com nopassword=y +#} + +#passdb { +# driver = static +# args = password=test +#} + +#userdb { +# driver = static +# args = uid=vmail gid=vmail home=/home/%u +#} diff --git a/dovecot/conf.d/auth-system.conf.ext b/dovecot/conf.d/auth-system.conf.ext new file mode 100644 index 00000000..ef3e3bc5 --- /dev/null +++ b/dovecot/conf.d/auth-system.conf.ext @@ -0,0 +1,71 @@ +# Authentication for system users. Included from auth.conf. +# +# +# + +# PAM authentication. Preferred nowadays by most systems. +# PAM is typically used with either userdb passwd or userdb static. +# REMEMBER: You'll need /etc/pam.d/dovecot file created for PAM +# authentication to actually work. +passdb { + driver = pam + # [session=yes] [setcred=yes] [failure_show_msg=yes] [max_requests=] + # [cache_key=] [] + args = "*" +} + +# System users (NSS, /etc/passwd, or similiar). +# In many systems nowadays this uses Name Service Switch, which is +# configured in /etc/nsswitch.conf. +#passdb { + #driver = passwd + # [blocking=no] + #args = +#} + +# Shadow passwords for system users (NSS, /etc/shadow or similiar). +# Deprecated by PAM nowadays. +# +#passdb { + #driver = shadow + # [blocking=no] + #args = +#} + +# PAM-like authentication for OpenBSD. +# +#passdb { + #driver = bsdauth + # [blocking=no] [cache_key=] + #args = +#} + +## +## User databases +## + +# System users (NSS, /etc/passwd, or similiar). In many systems nowadays this +# uses Name Service Switch, which is configured in /etc/nsswitch.conf. +userdb { + # + driver = passwd + # [blocking=no] + #args = +} + +# Static settings generated from template +#userdb { + #driver = static + # Can return anything a userdb could normally return. For example: + # + # args = uid=500 gid=500 home=/var/mail/%u + # + # LDA and LMTP needs to look up users only from the userdb. This of course + # doesn't work with static userdb because there is no list of users. + # Normally static userdb handles this by doing a passdb lookup. This works + # with most passdbs, with PAM being the most notable exception. If you do + # the user verification another way, you can add allow_all_users=yes to + # the args in which case the passdb lookup is skipped. + # + #args = +#} diff --git a/dovecot/conf.d/auth-vpopmail.conf.ext b/dovecot/conf.d/auth-vpopmail.conf.ext new file mode 100644 index 00000000..355237de --- /dev/null +++ b/dovecot/conf.d/auth-vpopmail.conf.ext @@ -0,0 +1,17 @@ +# Authentication for vpopmail users. Included from auth.conf. +# +# + +passdb { + driver = vpopmail + + # [cache_key=] [webmail=] + args = +} + +userdb { + driver = vpopmail + + # [quota_template=