From: Frank Brehm Date: Thu, 28 Dec 2017 18:05:34 +0000 (+0100) Subject: saving uncommitted changes in /etc prior to emerge run X-Git-Url: https://git.uhu-banane.net/?a=commitdiff_plain;h=f3c3b22355f1b1e91b9ca56a1035846364f467b4;p=config%2Fbruni%2Fetc.git saving uncommitted changes in /etc prior to emerge run --- diff --git a/.etckeeper b/.etckeeper index 9f2a85d3..961ea3f7 100755 --- a/.etckeeper +++ b/.etckeeper @@ -427,7 +427,7 @@ maybe chmod 0644 'config-archive/etc/conf.d/acpid.dist' maybe chmod 0644 'config-archive/etc/conf.d/alsasound' maybe chmod 0644 'config-archive/etc/conf.d/alsasound.dist' maybe chmod 0644 'config-archive/etc/conf.d/dmcrypt' -maybe chmod 0644 'config-archive/etc/conf.d/dmcrypt.dist.new' +maybe chmod 0644 'config-archive/etc/conf.d/dmcrypt.dist' maybe chmod 0644 'config-archive/etc/conf.d/fsck' maybe chmod 0644 'config-archive/etc/conf.d/fsck.dist' maybe chmod 0644 'config-archive/etc/conf.d/g15daemon' diff --git a/conf.d/dmcrypt b/conf.d/dmcrypt index 35a1fd2c..642ff087 100644 --- a/conf.d/dmcrypt +++ b/conf.d/dmcrypt @@ -26,19 +26,30 @@ # Global options: #---------------- -# Max number of checks to perform (1 per second) -#dmcrypt_max_timeout=120 +# How long to wait for each timeout (in seconds). +dmcrypt_key_timeout=1 + +# Max number of checks to perform (see dmcrypt_key_timeout). +#dmcrypt_max_timeout=300 + +# Number of password retries. +dmcrypt_retries=5 # Arguments: #----------- # target= == Mapping name for partition. # swap= == Mapping name for swap partition. # source='' == Real device for partition. +# Note: You can (and should) specify a tag like UUID +# for blkid (see -t option). This is safer than using +# the full path to the device. # key='[:]' == Fullpath from / or from inside removable media. # remdev='' == Device that will be assigned to removable media. # gpg_options='' == Default are --quiet --decrypt # options='' == cryptsetup, for LUKS you can only use --readonly # loop_file='' == Loopback file. +# Note: If you omit $source, then a free loopback will +# be looked up automatically. # pre_mount='cmds' == commands to execute before mounting partition. # post_mount='cmds' == commands to execute after mounting partition. #----------- @@ -79,13 +90,13 @@ #key='/full/path/to/homekey' #remdev='/dev/sda1' -##/home with gpg protected key on removable media(such as usb-stick) +## /home with gpg protected key on removable media(such as usb-stick) #target=crypt-home #source='/dev/hda5' #key='/full/path/to/homekey:gpg' #remdev='/dev/sda1' -##/tmp with regular keyfile +## /tmp with regular keyfile #target=crypt-tmp #source='/dev/hda6' #key='/full/path/to/tmpkey' @@ -93,6 +104,8 @@ #post_mount='chown root:root ${mount_point}; chmod 1777 ${mount_point}' ## Loopback file example -#mount='crypt-loop-home' +#target='crypt-loop-home' #source='/dev/loop0' #loop_file='/mnt/crypt/home' + +# The file must be terminated by a newline. Or leave this comment last. diff --git a/config-archive/etc/conf.d/dmcrypt.dist b/config-archive/etc/conf.d/dmcrypt.dist new file mode 100644 index 00000000..642ff087 --- /dev/null +++ b/config-archive/etc/conf.d/dmcrypt.dist @@ -0,0 +1,111 @@ +# /etc/conf.d/dmcrypt + +# For people who run dmcrypt on top of some other layer (like raid), +# use rc_need to specify that requirement. See the runscript(8) man +# page for more information. + +#-------------------- +# Instructions +#-------------------- + +# Note regarding the syntax of this file. This file is *almost* bash, +# but each line is evaluated separately. Separate swaps/targets can be +# specified. The init-script which reads this file assumes that a +# swap= or target= line starts a new section, similar to lilo or grub +# configuration. + +# Note when using gpg keys and /usr on a separate partition, you will +# have to copy /usr/bin/gpg to /bin/gpg so that it will work properly +# and ensure that gpg has been compiled statically. +# See http://bugs.gentoo.org/90482 for more information. + +# Note that the init-script which reads this file detects whether your +# partition is LUKS or not. No mkfs is run unless you specify a makefs +# option. + +# Global options: +#---------------- + +# How long to wait for each timeout (in seconds). +dmcrypt_key_timeout=1 + +# Max number of checks to perform (see dmcrypt_key_timeout). +#dmcrypt_max_timeout=300 + +# Number of password retries. +dmcrypt_retries=5 + +# Arguments: +#----------- +# target= == Mapping name for partition. +# swap= == Mapping name for swap partition. +# source='' == Real device for partition. +# Note: You can (and should) specify a tag like UUID +# for blkid (see -t option). This is safer than using +# the full path to the device. +# key='[:]' == Fullpath from / or from inside removable media. +# remdev='' == Device that will be assigned to removable media. +# gpg_options='' == Default are --quiet --decrypt +# options='' == cryptsetup, for LUKS you can only use --readonly +# loop_file='' == Loopback file. +# Note: If you omit $source, then a free loopback will +# be looked up automatically. +# pre_mount='cmds' == commands to execute before mounting partition. +# post_mount='cmds' == commands to execute after mounting partition. +#----------- +# Supported Modes +# gpg == decrypt and pipe key into cryptsetup. +# Note: new-line character must not be part of key. +# Command to erase \n char: 'cat key | tr -d '\n' > cleanKey' + +#-------------------- +# dm-crypt examples +#-------------------- + +## swap +# Swap partitions. These should come first so that no keys make their +# way into unencrypted swap. +# If no options are given, they will default to: -c aes -h sha1 -d /dev/urandom +# If no makefs is given then mkswap will be assumed +#swap=crypt-swap +#source='/dev/hda2' + +## /home with passphrase +#target=crypt-home +#source='/dev/hda5' + +## /home with regular keyfile +#target=crypt-home +#source='/dev/hda5' +#key='/full/path/to/homekey' + +## /home with gpg protected key +#target=crypt-home +#source='/dev/hda5' +#key='/full/path/to/homekey:gpg' + +## /home with regular keyfile on removable media(such as usb-stick) +#target=crypt-home +#source='/dev/hda5' +#key='/full/path/to/homekey' +#remdev='/dev/sda1' + +## /home with gpg protected key on removable media(such as usb-stick) +#target=crypt-home +#source='/dev/hda5' +#key='/full/path/to/homekey:gpg' +#remdev='/dev/sda1' + +## /tmp with regular keyfile +#target=crypt-tmp +#source='/dev/hda6' +#key='/full/path/to/tmpkey' +#pre_mount='/sbin/mkreiserfs -f -f ${dev}' +#post_mount='chown root:root ${mount_point}; chmod 1777 ${mount_point}' + +## Loopback file example +#target='crypt-loop-home' +#source='/dev/loop0' +#loop_file='/mnt/crypt/home' + +# The file must be terminated by a newline. Or leave this comment last. diff --git a/config-archive/etc/conf.d/dmcrypt.dist.new b/config-archive/etc/conf.d/dmcrypt.dist.new deleted file mode 100644 index 642ff087..00000000 --- a/config-archive/etc/conf.d/dmcrypt.dist.new +++ /dev/null @@ -1,111 +0,0 @@ -# /etc/conf.d/dmcrypt - -# For people who run dmcrypt on top of some other layer (like raid), -# use rc_need to specify that requirement. See the runscript(8) man -# page for more information. - -#-------------------- -# Instructions -#-------------------- - -# Note regarding the syntax of this file. This file is *almost* bash, -# but each line is evaluated separately. Separate swaps/targets can be -# specified. The init-script which reads this file assumes that a -# swap= or target= line starts a new section, similar to lilo or grub -# configuration. - -# Note when using gpg keys and /usr on a separate partition, you will -# have to copy /usr/bin/gpg to /bin/gpg so that it will work properly -# and ensure that gpg has been compiled statically. -# See http://bugs.gentoo.org/90482 for more information. - -# Note that the init-script which reads this file detects whether your -# partition is LUKS or not. No mkfs is run unless you specify a makefs -# option. - -# Global options: -#---------------- - -# How long to wait for each timeout (in seconds). -dmcrypt_key_timeout=1 - -# Max number of checks to perform (see dmcrypt_key_timeout). -#dmcrypt_max_timeout=300 - -# Number of password retries. -dmcrypt_retries=5 - -# Arguments: -#----------- -# target= == Mapping name for partition. -# swap= == Mapping name for swap partition. -# source='' == Real device for partition. -# Note: You can (and should) specify a tag like UUID -# for blkid (see -t option). This is safer than using -# the full path to the device. -# key='[:]' == Fullpath from / or from inside removable media. -# remdev='' == Device that will be assigned to removable media. -# gpg_options='' == Default are --quiet --decrypt -# options='' == cryptsetup, for LUKS you can only use --readonly -# loop_file='' == Loopback file. -# Note: If you omit $source, then a free loopback will -# be looked up automatically. -# pre_mount='cmds' == commands to execute before mounting partition. -# post_mount='cmds' == commands to execute after mounting partition. -#----------- -# Supported Modes -# gpg == decrypt and pipe key into cryptsetup. -# Note: new-line character must not be part of key. -# Command to erase \n char: 'cat key | tr -d '\n' > cleanKey' - -#-------------------- -# dm-crypt examples -#-------------------- - -## swap -# Swap partitions. These should come first so that no keys make their -# way into unencrypted swap. -# If no options are given, they will default to: -c aes -h sha1 -d /dev/urandom -# If no makefs is given then mkswap will be assumed -#swap=crypt-swap -#source='/dev/hda2' - -## /home with passphrase -#target=crypt-home -#source='/dev/hda5' - -## /home with regular keyfile -#target=crypt-home -#source='/dev/hda5' -#key='/full/path/to/homekey' - -## /home with gpg protected key -#target=crypt-home -#source='/dev/hda5' -#key='/full/path/to/homekey:gpg' - -## /home with regular keyfile on removable media(such as usb-stick) -#target=crypt-home -#source='/dev/hda5' -#key='/full/path/to/homekey' -#remdev='/dev/sda1' - -## /home with gpg protected key on removable media(such as usb-stick) -#target=crypt-home -#source='/dev/hda5' -#key='/full/path/to/homekey:gpg' -#remdev='/dev/sda1' - -## /tmp with regular keyfile -#target=crypt-tmp -#source='/dev/hda6' -#key='/full/path/to/tmpkey' -#pre_mount='/sbin/mkreiserfs -f -f ${dev}' -#post_mount='chown root:root ${mount_point}; chmod 1777 ${mount_point}' - -## Loopback file example -#target='crypt-loop-home' -#source='/dev/loop0' -#loop_file='/mnt/crypt/home' - -# The file must be terminated by a newline. Or leave this comment last.