From: frank Date: Wed, 1 Feb 2012 09:05:08 +0000 (+0100) Subject: committing changes in /etc after emerge run X-Git-Url: https://git.uhu-banane.net/?a=commitdiff_plain;h=f22fd287d8c056a7ad9e3313ca72dc0562e82049;p=config%2Fbruni%2Fetc.git committing changes in /etc after emerge run Package changes: --- diff --git a/dovecot/conf.d/10-auth.conf b/dovecot/conf.d/10-auth.conf deleted file mode 100644 index 6e7f02ed..00000000 --- a/dovecot/conf.d/10-auth.conf +++ /dev/null @@ -1,127 +0,0 @@ -## -## Authentication processes -## - -# Disable LOGIN command and all other plaintext authentications unless -# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP -# matches the local IP (ie. you're connecting from the same computer), the -# connection is considered secure and plaintext authentication is allowed. -#disable_plaintext_auth = yes - -# Authentication cache size (e.g. 10M). 0 means it's disabled. Note that -# bsdauth, PAM and vpopmail require cache_key to be set for caching to be used. -#auth_cache_size = 0 -# Time to live for cached data. After TTL expires the cached record is no -# longer used, *except* if the main database lookup returns internal failure. -# We also try to handle password changes automatically: If user's previous -# authentication was successful, but this one wasn't, the cache isn't used. -# For now this works only with plaintext authentication. -#auth_cache_ttl = 1 hour -# TTL for negative hits (user not found, password mismatch). -# 0 disables caching them completely. -#auth_cache_negative_ttl = 1 hour - -# Space separated list of realms for SASL authentication mechanisms that need -# them. You can leave it empty if you don't want to support multiple realms. -# Many clients simply use the first one listed here, so keep the default realm -# first. -#auth_realms = - -# Default realm/domain to use if none was specified. This is used for both -# SASL realms and appending @domain to username in plaintext logins. -#auth_default_realm = - -# List of allowed characters in username. If the user-given username contains -# a character not listed in here, the login automatically fails. This is just -# an extra check to make sure user can't exploit any potential quote escaping -# vulnerabilities with SQL/LDAP databases. If you want to allow all characters, -# set this value to empty. -#auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ - -# Username character translations before it's looked up from databases. The -# value contains series of from -> to characters. For example "#@/@" means -# that '#' and '/' characters are translated to '@'. -#auth_username_translation = - -# Username formatting before it's looked up from databases. You can use -# the standard variables here, eg. %Lu would lowercase the username, %n would -# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into -# "-AT-". This translation is done after auth_username_translation changes. -#auth_username_format = - -# If you want to allow master users to log in by specifying the master -# username within the normal username string (ie. not using SASL mechanism's -# support for it), you can specify the separator character here. The format -# is then . UW-IMAP uses "*" as the -# separator, so that could be a good choice. -#auth_master_user_separator = - -# Username to use for users logging in with ANONYMOUS SASL mechanism -#auth_anonymous_username = anonymous - -# Maximum number of dovecot-auth worker processes. They're used to execute -# blocking passdb and userdb queries (eg. MySQL and PAM). They're -# automatically created and destroyed as needed. -#auth_worker_max_count = 30 - -# Host name to use in GSSAPI principal names. The default is to use the -# name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab -# entries. -#auth_gssapi_hostname = - -# Kerberos keytab to use for the GSSAPI mechanism. Will use the system -# default (usually /etc/krb5.keytab) if not specified. You may need to change -# the auth service to run as root to be able to read this file. -#auth_krb5_keytab = - -# Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and -# ntlm_auth helper. -#auth_use_winbind = no - -# Path for Samba's ntlm_auth helper binary. -#auth_winbind_helper_path = /usr/bin/ntlm_auth - -# Time to delay before replying to failed authentications. -#auth_failure_delay = 2 secs - -# Require a valid SSL client certificate or the authentication fails. -#auth_ssl_require_client_cert = no - -# Take the username from client's SSL certificate, using -# X509_NAME_get_text_by_NID() which returns the subject's DN's -# CommonName. -#auth_ssl_username_from_cert = no - -# Space separated list of wanted authentication mechanisms: -# plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey -# gss-spnego -# NOTE: See also disable_plaintext_auth setting. -auth_mechanisms = plain - -## -## Password and user databases -## - -# -# Password database is used to verify user's password (and nothing more). -# You can have multiple passdbs and userdbs. This is useful if you want to -# allow both system users (/etc/passwd) and virtual users to login without -# duplicating the system users into virtual database. -# -# -# -# User database specifies where mails are located and what user/group IDs -# own them. For single-UID configuration use "static" userdb. -# -# - -#!include auth-deny.conf.ext -#!include auth-master.conf.ext - -!include auth-system.conf.ext -!include auth-sql.conf.ext -!include auth-ldap.conf.ext -#!include auth-passwdfile.conf.ext -#!include auth-checkpassword.conf.ext -#!include auth-vpopmail.conf.ext -#!include auth-static.conf.ext diff --git a/dovecot/conf.d/10-director.conf b/dovecot/conf.d/10-director.conf deleted file mode 100644 index d2d76647..00000000 --- a/dovecot/conf.d/10-director.conf +++ /dev/null @@ -1,56 +0,0 @@ -## -## Director-specific settings. -## - -# Director can be used by Dovecot proxy to keep a temporary user -> mail server -# mapping. As long as user has simultaneous connections, the user is always -# redirected to the same server. Each proxy server is running its own director -# process, and the directors are communicating the state to each others. -# Directors are mainly useful with NFS-like setups. - -# List of IPs or hostnames to all director servers, including ourself. -# Ports can be specified as ip:port. The default port is the same as -# what director service's inet_listener is using. -#director_servers = - -# List of IPs or hostnames to all backend mail servers. Ranges are allowed -# too, like 10.0.0.10-10.0.0.30. -#director_mail_servers = - -# How long to redirect users to a specific server after it no longer has -# any connections. -#director_user_expire = 15 min - -# TCP/IP port that accepts doveadm connections (instead of director connections) -# If you enable this, you'll also need to add inet_listener for the port. -#director_doveadm_port = 0 - -# To enable director service, uncomment the modes and assign a port. -service director { - unix_listener login/director { - #mode = 0666 - } - fifo_listener login/proxy-notify { - #mode = 0666 - } - unix_listener director-userdb { - #mode = 0600 - } - inet_listener { - #port = - } -} - -# Enable director for the wanted login services by telling them to -# connect to director socket instead of the default login socket: -service imap-login { - #executable = imap-login director -} -service pop3-login { - #executable = pop3-login director -} - -# Enable director for LMTP proxying: -protocol lmtp { - #auth_socket_path = director-userdb -} diff --git a/dovecot/conf.d/10-logging.conf b/dovecot/conf.d/10-logging.conf deleted file mode 100644 index ac6c8273..00000000 --- a/dovecot/conf.d/10-logging.conf +++ /dev/null @@ -1,83 +0,0 @@ -## -## Log destination. -## - -# Log file to use for error messages. "syslog" logs to syslog, -# /dev/stderr logs to stderr. -#log_path = syslog - -# Log file to use for informational messages. Defaults to log_path. -#info_log_path = -# Log file to use for debug messages. Defaults to info_log_path. -#debug_log_path = - -# Syslog facility to use if you're logging to syslog. Usually if you don't -# want to use "mail", you'll use local0..local7. Also other standard -# facilities are supported. -#syslog_facility = mail - -## -## Logging verbosity and debugging. -## - -# Log unsuccessful authentication attempts and the reasons why they failed. -#auth_verbose = no - -# In case of password mismatches, log the attempted password. Valid values are -# no, plain and sha1. sha1 can be useful for detecting brute force password -# attempts vs. user simply trying the same password over and over again. -#auth_verbose_passwords = no - -# Even more verbose logging for debugging purposes. Shows for example SQL -# queries. -#auth_debug = no - -# In case of password mismatches, log the passwords and used scheme so the -# problem can be debugged. Enabling this also enables auth_debug. -#auth_debug_passwords = no - -# Enable mail process debugging. This can help you figure out why Dovecot -# isn't finding your mails. -#mail_debug = no - -# Show protocol level SSL errors. -#verbose_ssl = no - -# mail_log plugin provides more event logging for mail processes. -plugin { - # Events to log. Also available: flag_change append - #mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename - # Available fields: uid, box, msgid, from, subject, size, vsize, flags - # size and vsize are available only for expunge and copy events. - #mail_log_fields = uid box msgid size -} - -## -## Log formatting. -## - -# Prefix for each line written to log file. % codes are in strftime(3) -# format. -#log_timestamp = "%b %d %H:%M:%S " - -# Space-separated list of elements we want to log. The elements which have -# a non-empty variable value are joined together to form a comma-separated -# string. -#login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c - -# Login log format. %$ contains login_log_format_elements string, %s contains -# the data we want to log. -#login_log_format = %$: %s - -# Log prefix for mail processes. See doc/wiki/Variables.txt for list of -# possible variables you can use. -#mail_log_prefix = "%s(%u): " - -# Format to use for logging mail deliveries. You can use variables: -# %$ - Delivery status message (e.g. "saved to INBOX") -# %m - Message-ID -# %s - Subject -# %f - From address -# %p - Physical size -# %w - Virtual size -#deliver_log_format = msgid=%m: %$ diff --git a/dovecot/conf.d/10-mail.conf b/dovecot/conf.d/10-mail.conf deleted file mode 100644 index 6ed42e31..00000000 --- a/dovecot/conf.d/10-mail.conf +++ /dev/null @@ -1,345 +0,0 @@ -## -## Mailbox locations and namespaces -## - -# Location for users' mailboxes. The default is empty, which means that Dovecot -# tries to find the mailboxes automatically. This won't work if the user -# doesn't yet have any mail, so you should explicitly tell Dovecot the full -# location. -# -# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u) -# isn't enough. You'll also need to tell Dovecot where the other mailboxes are -# kept. This is called the "root mail directory", and it must be the first -# path given in the mail_location setting. -# -# There are a few special variables you can use, eg.: -# -# %u - username -# %n - user part in user@domain, same as %u if there's no domain -# %d - domain part in user@domain, empty if there's no domain -# %h - home directory -# -# See doc/wiki/Variables.txt for full list. Some examples: -# -# mail_location = maildir:~/Maildir -# mail_location = mbox:~/mail:INBOX=/var/mail/%u -# mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n -# -# -# -mail_location = maildir:~/.maildir - -# If you need to set multiple mailbox locations or want to change default -# namespace settings, you can do it by defining namespace sections. -# -# You can have private, shared and public namespaces. Private namespaces -# are for user's personal mails. Shared namespaces are for accessing other -# users' mailboxes that have been shared. Public namespaces are for shared -# mailboxes that are managed by sysadmin. If you create any shared or public -# namespaces you'll typically want to enable ACL plugin also, otherwise all -# users can access all the shared mailboxes, assuming they have permissions -# on filesystem level to do so. -# -# REMEMBER: If you add any namespaces, the default namespace must be added -# explicitly, ie. mail_location does nothing unless you have a namespace -# without a location setting. Default namespace is simply done by having a -# namespace with empty prefix. -#namespace { - # Namespace type: private, shared or public - #type = private - - # Hierarchy separator to use. You should use the same separator for all - # namespaces or some clients get confused. '/' is usually a good one. - # The default however depends on the underlying mail storage format. - #separator = - - # Prefix required to access this namespace. This needs to be different for - # all namespaces. For example "Public/". - #prefix = - - # Physical location of the mailbox. This is in same format as - # mail_location, which is also the default for it. - #location = - - # There can be only one INBOX, and this setting defines which namespace - # has it. - #inbox = no - - # If namespace is hidden, it's not advertised to clients via NAMESPACE - # extension. You'll most likely also want to set list=no. This is mostly - # useful when converting from another server with different namespaces which - # you want to deprecate but still keep working. For example you can create - # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/". - #hidden = no - - # Show the mailboxes under this namespace with LIST command. This makes the - # namespace visible for clients that don't support NAMESPACE extension. - # "children" value lists child mailboxes, but hides the namespace prefix. - #list = yes - - # Namespace handles its own subscriptions. If set to "no", the parent - # namespace handles them (empty prefix should always have this as "yes") - #subscriptions = yes -#} - -# Example shared namespace configuration -#namespace { - #type = shared - #separator = / - - # Mailboxes are visible under "shared/user@domain/" - # %%n, %%d and %%u are expanded to the destination user. - #prefix = shared/%%u/ - - # Mail location for other users' mailboxes. Note that %variables and ~/ - # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the - # destination user's data. - #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u - - # Use the default namespace for saving subscriptions. - #subscriptions = no - - # List the shared/ namespace only if there are visible shared mailboxes. - #list = children -#} - -# System user and group used to access mails. If you use multiple, userdb -# can override these by returning uid or gid fields. You can use either numbers -# or names. -#mail_uid = -#mail_gid = - -# Group to enable temporarily for privileged operations. Currently this is -# used only with INBOX when either its initial creation or dotlocking fails. -# Typically this is set to "mail" to give access to /var/mail. -#mail_privileged_group = - -# Grant access to these supplementary groups for mail processes. Typically -# these are used to set up access to shared mailboxes. Note that it may be -# dangerous to set these if users can create symlinks (e.g. if "mail" group is -# set here, ln -s /var/mail ~/mail/var could allow a user to delete others' -# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it). -#mail_access_groups = - -# Allow full filesystem access to clients. There's no access checks other than -# what the operating system does for the active UID/GID. It works with both -# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/ -# or ~user/. -#mail_full_filesystem_access = no - -## -## Mail processes -## - -# Don't use mmap() at all. This is required if you store indexes to shared -# filesystems (NFS or clustered filesystem). -#mmap_disable = no - -# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL -# since version 3, so this should be safe to use nowadays by default. -#dotlock_use_excl = yes - -# When to use fsync() or fdatasync() calls: -# optimized (default): Whenever necessary to avoid losing important data -# always: Useful with e.g. NFS when write()s are delayed -# never: Never use it (best performance, but crashes can lose data) -#mail_fsync = optimized - -# Mail storage exists in NFS. Set this to yes to make Dovecot flush NFS caches -# whenever needed. If you're using only a single mail server this isn't needed. -#mail_nfs_storage = no -# Mail index files also exist in NFS. Setting this to yes requires -# mmap_disable=yes and fsync_disable=no. -#mail_nfs_index = no - -# Locking method for index files. Alternatives are fcntl, flock and dotlock. -# Dotlocking uses some tricks which may create more disk I/O than other locking -# methods. NFS users: flock doesn't work, remember to change mmap_disable. -#lock_method = fcntl - -# Directory in which LDA/LMTP temporarily stores incoming mails >128 kB. -#mail_temp_dir = /tmp - -# Valid UID range for users, defaults to 500 and above. This is mostly -# to make sure that users can't log in as daemons or other system users. -# Note that denying root logins is hardcoded to dovecot binary and can't -# be done even if first_valid_uid is set to 0. -#first_valid_uid = 500 -#last_valid_uid = 0 - -# Valid GID range for users, defaults to non-root/wheel. Users having -# non-valid GID as primary group ID aren't allowed to log in. If user -# belongs to supplementary groups with non-valid GIDs, those groups are -# not set. -#first_valid_gid = 1 -#last_valid_gid = 0 - -# Maximum allowed length for mail keyword name. It's only forced when trying -# to create new keywords. -#mail_max_keyword_length = 50 - -# ':' separated list of directories under which chrooting is allowed for mail -# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too). -# This setting doesn't affect login_chroot, mail_chroot or auth chroot -# settings. If this setting is empty, "/./" in home dirs are ignored. -# WARNING: Never add directories here which local users can modify, that -# may lead to root exploit. Usually this should be done only if you don't -# allow shell access for users. -#valid_chroot_dirs = - -# Default chroot directory for mail processes. This can be overridden for -# specific users in user database by giving /./ in user's home directory -# (eg. /home/./user chroots into /home). Note that usually there is no real -# need to do chrooting, Dovecot doesn't allow users to access files outside -# their mail directory anyway. If your home directories are prefixed with -# the chroot directory, append "/." to mail_chroot. -#mail_chroot = - -# UNIX socket path to master authentication server to find users. -# This is used by imap (for shared users) and lda. -#auth_socket_path = /var/run/dovecot/auth-userdb - -# Directory where to look up mail plugins. -#mail_plugin_dir = /usr/lib/dovecot - -# Space separated list of plugins to load for all services. Plugins specific to -# IMAP, LDA, etc. are added to this list in their own .conf files. -#mail_plugins = - -## -## Mailbox handling optimizations -## - -# The minimum number of mails in a mailbox before updates are done to cache -# file. This allows optimizing Dovecot's behavior to do less disk writes at -# the cost of more disk reads. -#mail_cache_min_mail_count = 0 - -# When IDLE command is running, mailbox is checked once in a while to see if -# there are any new mails or other changes. This setting defines the minimum -# time to wait between those checks. Dovecot can also use dnotify, inotify and -# kqueue to find out immediately when changes occur. -#mailbox_idle_check_interval = 30 secs - -# Save mails with CR+LF instead of plain LF. This makes sending those mails -# take less CPU, especially with sendfile() syscall with Linux and FreeBSD. -# But it also creates a bit more disk I/O which may just make it slower. -# Also note that if other software reads the mboxes/maildirs, they may handle -# the extra CRs wrong and cause problems. -#mail_save_crlf = no - -## -## Maildir-specific settings -## - -# By default LIST command returns all entries in maildir beginning with a dot. -# Enabling this option makes Dovecot return only entries which are directories. -# This is done by stat()ing each entry, so it causes more disk I/O. -# (For systems setting struct dirent->d_type, this check is free and it's -# done always regardless of this setting) -#maildir_stat_dirs = no - -# When copying a message, do it with hard links whenever possible. This makes -# the performance much better, and it's unlikely to have any side effects. -#maildir_copy_with_hardlinks = yes - -# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only -# when its mtime changes unexpectedly or when we can't find the mail otherwise. -#maildir_very_dirty_syncs = no - -## -## mbox-specific settings -## - -# Which locking methods to use for locking mbox. There are four available: -# dotlock: Create .lock file. This is the oldest and most NFS-safe -# solution. If you want to use /var/mail/ like directory, the users -# will need write access to that directory. -# dotlock_try: Same as dotlock, but if it fails because of permissions or -# because there isn't enough disk space, just skip it. -# fcntl : Use this if possible. Works with NFS too if lockd is used. -# flock : May not exist in all systems. Doesn't work with NFS. -# lockf : May not exist in all systems. Doesn't work with NFS. -# -# You can use multiple locking methods; if you do the order they're declared -# in is important to avoid deadlocks if other MTAs/MUAs are using multiple -# locking methods as well. Some operating systems don't allow using some of -# them simultaneously. -#mbox_read_locks = fcntl -#mbox_write_locks = dotlock fcntl - -# Maximum time to wait for lock (all of them) before aborting. -#mbox_lock_timeout = 5 mins - -# If dotlock exists but the mailbox isn't modified in any way, override the -# lock file after this much time. -#mbox_dotlock_change_timeout = 2 mins - -# When mbox changes unexpectedly we have to fully read it to find out what -# changed. If the mbox is large this can take a long time. Since the change -# is usually just a newly appended mail, it'd be faster to simply read the -# new mails. If this setting is enabled, Dovecot does this but still safely -# fallbacks to re-reading the whole mbox file whenever something in mbox isn't -# how it's expected to be. The only real downside to this setting is that if -# some other MUA changes message flags, Dovecot doesn't notice it immediately. -# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK -# commands. -#mbox_dirty_syncs = yes - -# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE, -# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored. -#mbox_very_dirty_syncs = no - -# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK -# commands and when closing the mailbox). This is especially useful for POP3 -# where clients often delete all mails. The downside is that our changes -# aren't immediately visible to other MUAs. -#mbox_lazy_writes = yes - -# If mbox size is smaller than this (e.g. 100k), don't write index files. -# If an index file already exists it's still read, just not updated. -#mbox_min_index_size = 0 - -## -## mdbox-specific settings -## - -# Maximum dbox file size until it's rotated. -#mdbox_rotate_size = 2M - -# Maximum dbox file age until it's rotated. Typically in days. Day begins -# from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled. -#mdbox_rotate_interval = 1d - -# When creating new mdbox files, immediately preallocate their size to -# mdbox_rotate_size. This setting currently works only in Linux with some -# filesystems (ext4, xfs). -#mdbox_preallocate_space = no - -## -## Mail attachments -## - -# sdbox and mdbox support saving mail attachments to external files, which -# also allows single instance storage for them. Other backends don't support -# this for now. - -# WARNING: This feature hasn't been tested much yet. Use at your own risk. - -# Directory root where to store mail attachments. Disabled, if empty. -#mail_attachment_dir = - -# Attachments smaller than this aren't saved externally. It's also possible to -# write a plugin to disable saving specific attachments externally. -#mail_attachment_min_size = 128k - -# Filesystem backend to use for saving attachments: -# posix : No SiS done by Dovecot (but this might help FS's own deduplication) -# sis posix : SiS with immediate byte-by-byte comparison during saving -# sis-queue posix : SiS with delayed comparison and deduplication -#mail_attachment_fs = sis posix - -# Hash format to use in attachment filenames. You can add any text and -# variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}. -# Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits -#mail_attachment_hash = %{sha1} diff --git a/dovecot/conf.d/10-master.conf b/dovecot/conf.d/10-master.conf deleted file mode 100644 index f0e79abc..00000000 --- a/dovecot/conf.d/10-master.conf +++ /dev/null @@ -1,111 +0,0 @@ -#default_process_limit = 100 -#default_client_limit = 1000 - -# Default VSZ (virtual memory size) limit for service processes. This is mainly -# intended to catch and kill processes that leak memory before they eat up -# everything. -#default_vsz_limit = 256M - -# Login user is internally used by login processes. This is the most untrusted -# user in Dovecot system. It shouldn't have access to anything at all. -#default_login_user = dovenull - -# Internal user is used by unprivileged processes. It should be separate from -# login user, so that login processes can't disturb other processes. -#default_internal_user = dovecot - -service imap-login { - inet_listener imap { - #port = 143 - } - inet_listener imaps { - #port = 993 - #ssl = yes - } - - # Number of connections to handle before starting a new process. Typically - # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0 - # is faster. - #service_count = 1 - - # Number of processes to always keep waiting for more connections. - #process_min_avail = 0 - - # If you set service_count=0, you probably need to grow this. - #vsz_limit = 64M -} - -service pop3-login { - inet_listener pop3 { - #port = 110 - } - inet_listener pop3s { - #port = 995 - #ssl = yes - } -} - -service lmtp { - unix_listener lmtp { - #mode = 0666 - } - - # Create inet listener only if you can't use the above UNIX socket - #inet_listener lmtp { - # Avoid making LMTP visible for the entire internet - #address = - #port = - #} -} - -service imap { - # Most of the memory goes to mmap()ing files. You may need to increase this - # limit if you have huge mailboxes. - #vsz_limit = 256M - - # Max. number of IMAP processes (connections) - #process_limit = 1024 -} - -service pop3 { - # Max. number of POP3 processes (connections) - #process_limit = 1024 -} - -service auth { - # auth_socket_path points to this userdb socket by default. It's typically - # used by dovecot-lda, doveadm, possibly imap process, etc. Its default - # permissions make it readable only by root, but you may need to relax these - # permissions. Users that have access to this socket are able to get a list - # of all usernames and get results of everyone's userdb lookups. - unix_listener auth-userdb { - #mode = 0600 - #user = - #group = - } - - # Postfix smtp-auth - #unix_listener /var/spool/postfix/private/auth { - # mode = 0666 - #} - - # Auth process is run as this user. - #user = $default_internal_user -} - -service auth-worker { - # Auth worker process is run as root by default, so that it can access - # /etc/shadow. If this isn't necessary, the user should be changed to - # $default_internal_user. - #user = root -} - -service dict { - # If dict proxy is used, mail processes should have access to its socket. - # For example: mode=0660, group=vmail and global mail_access_groups=vmail - unix_listener dict { - #mode = 0600 - #user = - #group = - } -} diff --git a/dovecot/conf.d/10-ssl.conf b/dovecot/conf.d/10-ssl.conf deleted file mode 100644 index 975f6e40..00000000 --- a/dovecot/conf.d/10-ssl.conf +++ /dev/null @@ -1,41 +0,0 @@ -## -## SSL settings -## - -# SSL/TLS support: yes, no, required. -ssl = yes - -# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before -# dropping root privileges, so keep the key file unreadable by anyone but -# root. Included doc/mkcert.sh can be used to easily generate self-signed -# certificate, just make sure to update the domains in dovecot-openssl.cnf -ssl_cert = . -#postmaster_address = - -# Hostname to use in various parts of sent mails, eg. in Message-Id. -# Default is the system's real hostname. -#hostname = - -# If user is over quota, return with temporary failure instead of -# bouncing the mail. -#quota_full_tempfail = no - -# Binary to use for sending mails. -#sendmail_path = /usr/sbin/sendmail - -# If non-empty, send mails via this SMTP host[:port] instead of sendmail. -#submission_host = - -# Subject: header to use for rejection mails. You can use the same variables -# as for rejection_reason below. -#rejection_subject = Rejected: %s - -# Human readable error message for rejection mails. You can use variables: -# %n = CRLF, %r = reason, %s = original subject, %t = recipient -#rejection_reason = Your message to <%t> was automatically rejected:%n%r - -# Delimiter character between local-part and detail in email address. -#recipient_delimiter = + - -# Header where the original recipient address (SMTP's RCPT TO: address) is taken -# from if not available elsewhere. With dovecot-lda -a parameter overrides this. -# A commonly used header for this is X-Original-To. -#lda_original_recipient_header = - -# Should saving a mail to a nonexistent mailbox automatically create it? -#lda_mailbox_autocreate = no - -# Should automatically created mailboxes be also automatically subscribed? -#lda_mailbox_autosubscribe = no - -protocol lda { - # Space separated list of plugins to load (default is global mail_plugins). - #mail_plugins = $mail_plugins -} diff --git a/dovecot/conf.d/20-imap.conf b/dovecot/conf.d/20-imap.conf deleted file mode 100644 index 99f78339..00000000 --- a/dovecot/conf.d/20-imap.conf +++ /dev/null @@ -1,58 +0,0 @@ -## -## IMAP specific settings -## - -protocol imap { - # Maximum IMAP command line length. Some clients generate very long command - # lines with huge mailboxes, so you may need to raise this if you get - # "Too long argument" or "IMAP command line too large" errors often. - #imap_max_line_length = 64k - - # Maximum number of IMAP connections allowed for a user from each IP address. - # NOTE: The username is compared case-sensitively. - #mail_max_userip_connections = 10 - - # Space separated list of plugins to load (default is global mail_plugins). - #mail_plugins = $mail_plugins - - # IMAP logout format string: - # %i - total number of bytes read from client - # %o - total number of bytes sent to client - #imap_logout_format = bytes=%i/%o - - # Override the IMAP CAPABILITY response. If the value begins with '+', - # add the given capabilities on top of the defaults (e.g. +XFOO XBAR). - #imap_capability = - - # How long to wait between "OK Still here" notifications when client is - # IDLEing. - #imap_idle_notify_interval = 2 mins - - # ID field names and values to send to clients. Using * as the value makes - # Dovecot use the default value. The following fields have default values - # currently: name, version, os, os-version, support-url, support-email. - #imap_id_send = - - # ID fields sent by client to log. * means everything. - #imap_id_log = - - # Workarounds for various client bugs: - # delay-newmail: - # Send EXISTS/RECENT new mail notifications only when replying to NOOP - # and CHECK commands. Some clients ignore them otherwise, for example OSX - # Mail (= 2.1.4) : %v.%u - # Dovecot v0.99.x : %v.%u - # tpop3d : %Mf - # - # Note that Outlook 2003 seems to have problems with %v.%u format which was - # Dovecot's default, so if you're building a new server it would be a good - # idea to change this. %08Xu%08Xv should be pretty fail-safe. - # - #pop3_uidl_format = %08Xu%08Xv - - # Permanently save UIDLs sent to POP3 clients, so pop3_uidl_format changes - # won't change those UIDLs. Currently this works only with Maildir. - #pop3_save_uidl = no - - # POP3 logout format string: - # %i - total number of bytes read from client - # %o - total number of bytes sent to client - # %t - number of TOP commands - # %p - number of bytes sent to client as a result of TOP command - # %r - number of RETR commands - # %b - number of bytes sent to client as a result of RETR command - # %d - number of deleted messages - # %m - number of messages (before deletion) - # %s - mailbox size in bytes (before deletion) - # %u - old/new UIDL hash. may help finding out if UIDLs changed unexpectedly - #pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s - - # Maximum number of POP3 connections allowed for a user from each IP address. - # NOTE: The username is compared case-sensitively. - #mail_max_userip_connections = 10 - - # Space separated list of plugins to load (default is global mail_plugins). - #mail_plugins = $mail_plugins - - # Workarounds for various client bugs: - # outlook-no-nuls: - # Outlook and Outlook Express hang if mails contain NUL characters. - # This setting replaces them with 0x80 character. - # oe-ns-eoh: - # Outlook Express and Netscape Mail breaks if end of headers-line is - # missing. This option simply sends it if it's missing. - # The list is space-separated. - #pop3_client_workarounds = -} diff --git a/dovecot/conf.d/90-acl.conf b/dovecot/conf.d/90-acl.conf deleted file mode 100644 index f0c0e7a5..00000000 --- a/dovecot/conf.d/90-acl.conf +++ /dev/null @@ -1,19 +0,0 @@ -## -## Mailbox access control lists. -## - -# vfile backend reads ACLs from "dovecot-acl" file from mail directory. -# You can also optionally give a global ACL directory path where ACLs are -# applied to all users' mailboxes. The global ACL directory contains -# one file for each mailbox, eg. INBOX or sub.mailbox. cache_secs parameter -# specifies how many seconds to wait between stat()ing dovecot-acl file -# to see if it changed. -plugin { - #acl = vfile:/etc/dovecot/global-acls:cache_secs=300 -} - -# To let users LIST mailboxes shared by other users, Dovecot needs a -# shared mailbox dictionary. For example: -plugin { - #acl_shared_dict = file:/var/lib/dovecot/shared-mailboxes -} diff --git a/dovecot/conf.d/90-plugin.conf b/dovecot/conf.d/90-plugin.conf deleted file mode 100644 index 8c8fccf4..00000000 --- a/dovecot/conf.d/90-plugin.conf +++ /dev/null @@ -1,11 +0,0 @@ -## -## Plugin settings -## - -# All wanted plugins must be listed in mail_plugins setting before any of the -# settings take effect. See for list of plugins and -# their configuration. Note that %variable expansion is done for all values. - -plugin { - #setting_name = value -} diff --git a/dovecot/conf.d/90-quota.conf b/dovecot/conf.d/90-quota.conf deleted file mode 100644 index 6984da6f..00000000 --- a/dovecot/conf.d/90-quota.conf +++ /dev/null @@ -1,75 +0,0 @@ -## -## Quota configuration. -## - -# Note that you also have to enable quota plugin in mail_plugins setting. -# - -## -## Quota limits -## - -# Quota limits are set using "quota_rule" parameters. To get per-user quota -# limits, you can set/override them by returning "quota_rule" extra field -# from userdb. It's also possible to give mailbox-specific limits, for example -# to give additional 100 MB when saving to Trash: - -plugin { - #quota_rule = *:storage=1G - #quota_rule2 = Trash:storage=+100M -} - -## -## Quota warnings -## - -# You can execute a given command when user exceeds a specified quota limit. -# Each quota root has separate limits. Only the command for the first -# exceeded limit is excecuted, so put the highest limit first. -# The commands are executed via script service by connecting to the named -# UNIX socket (quota-warning below). -# Note that % needs to be escaped as %%, otherwise "% " expands to empty. - -plugin { - #quota_warning = storage=95%% quota-warning 95 %u - #quota_warning2 = storage=80%% quota-warning 80 %u -} - -# Example quota-warning service. The unix listener's permissions should be -# set in a way that mail processes can connect to it. Below example assumes -# that mail processes run as vmail user. If you use mode=0666, all system users -# can generate quota warnings to anyone. -#service quota-warning { -# executable = script /usr/local/bin/quota-warning.sh -# user = dovecot -# unix_listener quota-warning { -# user = vmail -# } -#} - -## -## Quota backends -## - -# Multiple backends are supported: -# dirsize: Find and sum all the files found from mail directory. -# Extremely SLOW with Maildir. It'll eat your CPU and disk I/O. -# dict: Keep quota stored in dictionary (eg. SQL) -# maildir: Maildir++ quota -# fs: Read-only support for filesystem quota - -plugin { - #quota = dirsize:User quota - #quota = maildir:User quota - #quota = dict:User quota::proxy::quota - #quota = fs:User quota -} - -# Multiple quota roots are also possible, for example this gives each user -# their own 100MB quota and one shared 1GB quota within the domain: -plugin { - #quota = dict:user::proxy::quota - #quota2 = dict:domain:%d:proxy::quota_domain - #quota_rule = *:storage=102400 - #quota2_rule = *:storage=1048576 -} diff --git a/dovecot/conf.d/auth-checkpassword.conf.ext b/dovecot/conf.d/auth-checkpassword.conf.ext deleted file mode 100644 index 02efae33..00000000 --- a/dovecot/conf.d/auth-checkpassword.conf.ext +++ /dev/null @@ -1,21 +0,0 @@ -# Authentication for checkpassword users. Included from auth.conf. -# -# - -passdb { - driver = checkpassword - args = /usr/bin/checkpassword -} - -# passdb lookup should return also userdb info -userdb { - driver = prefetch -} - -# Standard checkpassword doesn't support direct userdb lookups. -# If you need checkpassword userdb, the checkpassword must support -# Dovecot-specific extensions. -#userdb { -# driver = checkpassword -# args = /usr/bin/checkpassword -#} diff --git a/dovecot/conf.d/auth-deny.conf.ext b/dovecot/conf.d/auth-deny.conf.ext deleted file mode 100644 index f2d897d1..00000000 --- a/dovecot/conf.d/auth-deny.conf.ext +++ /dev/null @@ -1,15 +0,0 @@ -# Deny access for users. Included from auth.conf. - -# Users can be (temporarily) disabled by adding a passdb with deny=yes. -# If the user is found from that database, authentication will fail. -# The deny passdb should always be specified before others, so it gets -# checked first. - -# Example deny passdb using passwd-file. You can use any passdb though. -passdb { - driver = passwd-file - deny = yes - - # File contains a list of usernames, one per line - args = /etc/dovecot/deny-users -} diff --git a/dovecot/conf.d/auth-ldap.conf.ext b/dovecot/conf.d/auth-ldap.conf.ext deleted file mode 100644 index c5852801..00000000 --- a/dovecot/conf.d/auth-ldap.conf.ext +++ /dev/null @@ -1,30 +0,0 @@ -# Authentication for LDAP users. Included from auth.conf. -# -# - -passdb { - driver = ldap - - # Path for LDAP configuration file, see example-config/dovecot-ldap.conf.ext - args = /etc/dovecot/dovecot-ldap.conf.ext -} - -# "prefetch" user database means that the passdb already provided the -# needed information and there's no need to do a separate userdb lookup. -# -#userdb { -# driver = prefetch -#} - -userdb { - driver = ldap - args = /etc/dovecot/dovecot-ldap.conf.ext -} - -# If you don't have any user-specific settings, you can avoid the userdb LDAP -# lookup by using userdb static instead of userdb ldap, for example: -# -#userdb { - #driver = static - #args = uid=vmail gid=vmail home=/var/vmail/%u -#} diff --git a/dovecot/conf.d/auth-master.conf.ext b/dovecot/conf.d/auth-master.conf.ext deleted file mode 100644 index 8e5107fd..00000000 --- a/dovecot/conf.d/auth-master.conf.ext +++ /dev/null @@ -1,16 +0,0 @@ -# Authentication for master users. Included from auth.conf. - -# By adding master=yes setting inside a passdb you make the passdb a list -# of "master users", who can log in as anyone else. -# - -# Example master user passdb using passwd-file. You can use any passdb though. -passdb { - driver = passwd-file - master = yes - args = /etc/dovecot/master-users - - # Unless you're using PAM, you probably still want the destination user to - # be looked up from passdb that it really exists. pass=yes does that. - pass = yes -} diff --git a/dovecot/conf.d/auth-passwdfile.conf.ext b/dovecot/conf.d/auth-passwdfile.conf.ext deleted file mode 100644 index 3f57ceeb..00000000 --- a/dovecot/conf.d/auth-passwdfile.conf.ext +++ /dev/null @@ -1,14 +0,0 @@ -# Authentication for passwd-file users. Included from auth.conf. -# -# passwd-like file with specified location. -# - -passdb { - driver = passwd-file - args = scheme=CRYPT username_format=%u /etc/dovecot/users -} - -userdb { - driver = passwd-file - args = username_format=%u /etc/dovecot/users -} diff --git a/dovecot/conf.d/auth-sql.conf.ext b/dovecot/conf.d/auth-sql.conf.ext deleted file mode 100644 index 9ba585b5..00000000 --- a/dovecot/conf.d/auth-sql.conf.ext +++ /dev/null @@ -1,30 +0,0 @@ -# Authentication for SQL users. Included from auth.conf. -# -# - -passdb { - driver = sql - - # Path for SQL configuration file, see example-config/dovecot-sql.conf.ext - args = /etc/dovecot/dovecot-sql.conf.ext -} - -# "prefetch" user database means that the passdb already provided the -# needed information and there's no need to do a separate userdb lookup. -# -#userdb { -# driver = prefetch -#} - -userdb { - driver = sql - args = /etc/dovecot/dovecot-sql.conf.ext -} - -# If you don't have any user-specific settings, you can avoid the user_query -# by using userdb static instead of userdb sql, for example: -# -#userdb { - #driver = static - #args = uid=vmail gid=vmail home=/var/vmail/%u -#} diff --git a/dovecot/conf.d/auth-static.conf.ext b/dovecot/conf.d/auth-static.conf.ext deleted file mode 100644 index 238d5170..00000000 --- a/dovecot/conf.d/auth-static.conf.ext +++ /dev/null @@ -1,24 +0,0 @@ -# Static passdb. Included from auth.conf. - -# This can be used for situations where Dovecot doesn't need to verify the -# username or the password, or if there is a single password for all users: -# -# - proxy frontend, where the backend verifies the password -# - proxy backend, where the frontend already verified the password -# - authentication with SSL certificates -# - simple testing - -#passdb { -# driver = static -# args = proxy=y host=%1Mu.example.com nopassword=y -#} - -#passdb { -# driver = static -# args = password=test -#} - -#userdb { -# driver = static -# args = uid=vmail gid=vmail home=/home/%u -#} diff --git a/dovecot/conf.d/auth-system.conf.ext b/dovecot/conf.d/auth-system.conf.ext deleted file mode 100644 index ef3e3bc5..00000000 --- a/dovecot/conf.d/auth-system.conf.ext +++ /dev/null @@ -1,71 +0,0 @@ -# Authentication for system users. Included from auth.conf. -# -# -# - -# PAM authentication. Preferred nowadays by most systems. -# PAM is typically used with either userdb passwd or userdb static. -# REMEMBER: You'll need /etc/pam.d/dovecot file created for PAM -# authentication to actually work. -passdb { - driver = pam - # [session=yes] [setcred=yes] [failure_show_msg=yes] [max_requests=] - # [cache_key=] [] - args = "*" -} - -# System users (NSS, /etc/passwd, or similiar). -# In many systems nowadays this uses Name Service Switch, which is -# configured in /etc/nsswitch.conf. -#passdb { - #driver = passwd - # [blocking=no] - #args = -#} - -# Shadow passwords for system users (NSS, /etc/shadow or similiar). -# Deprecated by PAM nowadays. -# -#passdb { - #driver = shadow - # [blocking=no] - #args = -#} - -# PAM-like authentication for OpenBSD. -# -#passdb { - #driver = bsdauth - # [blocking=no] [cache_key=] - #args = -#} - -## -## User databases -## - -# System users (NSS, /etc/passwd, or similiar). In many systems nowadays this -# uses Name Service Switch, which is configured in /etc/nsswitch.conf. -userdb { - # - driver = passwd - # [blocking=no] - #args = -} - -# Static settings generated from template -#userdb { - #driver = static - # Can return anything a userdb could normally return. For example: - # - # args = uid=500 gid=500 home=/var/mail/%u - # - # LDA and LMTP needs to look up users only from the userdb. This of course - # doesn't work with static userdb because there is no list of users. - # Normally static userdb handles this by doing a passdb lookup. This works - # with most passdbs, with PAM being the most notable exception. If you do - # the user verification another way, you can add allow_all_users=yes to - # the args in which case the passdb lookup is skipped. - # - #args = -#} diff --git a/dovecot/conf.d/auth-vpopmail.conf.ext b/dovecot/conf.d/auth-vpopmail.conf.ext deleted file mode 100644 index 355237de..00000000 --- a/dovecot/conf.d/auth-vpopmail.conf.ext +++ /dev/null @@ -1,17 +0,0 @@ -# Authentication for vpopmail users. Included from auth.conf. -# -# - -passdb { - driver = vpopmail - - # [cache_key=] [webmail=] - args = -} - -userdb { - driver = vpopmail - - # [quota_template=