From: Frank Brehm Date: Sun, 3 Nov 2013 22:31:19 +0000 (+0100) Subject: Current state X-Git-Url: https://git.uhu-banane.net/?a=commitdiff_plain;h=e583bed926d76716b0e009221251e74ffe575be9;p=config%2Fsamara%2Fetc.git Current state --- diff --git a/eixrc/00-eixrc b/eixrc/00-eixrc new file mode 100644 index 0000000..be2cdea --- /dev/null +++ b/eixrc/00-eixrc @@ -0,0 +1,30 @@ +# /etc/eixrc/00-eirc +# +# All non-hidden files in /etc/eixrc +# (or a subdirectory thereof) are read in alphabetical order. +# +# In these files system-wide defaults for variables related to eix can +# be stored, i.e. the variables set in files override the built-in defaults. +# Both can be overridden by ~/.eixrc and by environment variables. +# +# It is strongly recommended to set here only those variables which you +# want to *differ* from the built-in defaults (or for which you have a +# particular reason why the default should never change with an eix update). +# +# *Otherwise you might miss changes in the defaults in newer eix versions* +# which may result in confusing behavior of the eix binaries. +# +# If you want to get a file containing the setting of all related variables +# in the current/defaults state, redirect the output of options --dump +# or --dump-defaults, respectively. +# +# However once more: To avoid unexpected problems +# +# *IT IS NOT RECOMMENDED TO SET _ALL_ VARIABLES* in /etc/eixrc/* +# +# Only set those for which you have a reason to do so! +# +# For the available variables and their defaults, see the output of the +# options --dump or --dump-defaults. +# For more detailed explanations see the manpage of eix. + diff --git a/hosts b/hosts index 92f8bb7..ca6b622 100644 --- a/hosts +++ b/hosts @@ -11,6 +11,8 @@ 127.0.0.1 samara.pb.local samara localhost ::1 samara.pb.local samara localhost +172.21.2.89 jericho-local + # # Imaginary network. #10.0.0.2 myname diff --git a/init.d/dmcrypt b/init.d/dmcrypt deleted file mode 100755 index 130036b..0000000 --- a/init.d/dmcrypt +++ /dev/null @@ -1,346 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2012 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/cryptsetup/files/dmcrypt.rc,v 1.4 2012/05/11 08:33:01 vapier Exp $ - -depend() { - before checkfs fsck -} - -# We support multiple dmcrypt instances based on $SVCNAME -execute_hook="dm_crypt_execute_dmcrypt" -# XXX: Should we drop this ? -# execute_hook="dm_crypt_execute_localmount" -conf_file="/etc/conf.d/${SVCNAME}" - -# Get splash helpers if available. -if [ -e /sbin/splash-functions.sh ] ; then - . /sbin/splash-functions.sh -fi - -# Setup mappings for an individual target/swap -# Note: This relies on variables localized in the main body below. -dm_crypt_execute_dmcrypt() { - local dev ret mode foo - - if [ -n "${target}" ] ; then - # let user set options, otherwise leave empty - : ${options:=' '} - elif [ -n "${swap}" ] ; then - if cryptsetup isLuks ${source} 2>/dev/null ; then - ewarn "The swap you have defined is a LUKS partition. Aborting crypt-swap setup." - return - fi - target=${swap} - # swap contents do not need to be preserved between boots, luks not required. - # suspend2 users should have initramfs's init handling their swap partition either way. - : ${options:='-c aes -h sha1 -d /dev/urandom'} - : ${pre_mount:='mkswap ${dev}'} - else - return - fi - if [ -z "${source}" ] && [ ! -e "${source}" ] ; then - ewarn "source \"${source}\" for ${target} missing, skipping..." - return - fi - - if [ -n "${loop_file}" ] ; then - dev="/dev/mapper/${target}" - ebegin " Setting up loop device ${source}" - losetup ${source} ${loop_file} - fi - - # cryptsetup: - # luksOpen # is $source - # create # is $target - local arg1="create" arg2="${target}" arg3="${source}" luks=0 - - cryptsetup isLuks ${source} 2>/dev/null && { arg1="luksOpen"; arg2="${source}"; arg3="${target}"; luks=1; } - - # Older versions reported: - # ${target} is active: - # Newer versions report: - # ${target} is active[ and is in use.] - if cryptsetup status ${target} | egrep -q ' is active' ; then - einfo "dm-crypt mapping ${target} is already configured" - return - fi - splash svc_input_begin ${SVCNAME} >/dev/null 2>&1 - - # Handle keys - if [ -n "${key}" ] ; then - read_abort() { - # some colors - local ans savetty resettty - [ -z "${NORMAL}" ] && eval $(eval_ecolors) - einfon " $1? (${WARN}yes${NORMAL}/${GOOD}No${NORMAL}) " - shift - # This is ugly as s**t. But POSIX doesn't provide `read -t`, so - # we end up having to implement our own crap with stty/etc... - savetty=$(stty -g) - resettty='stty ${savetty}; trap - EXIT HUP INT TERM' - trap 'eval "${resettty}"' EXIT HUP INT TERM - stty -icanon - [ "${1}" = -t ] && stty min 0 time "$(( $2 * 10 ))" - ans=$(dd count=1 bs=1 2>/dev/null) || ans='' - eval "${resettty}" - if [ -z "${ans}" ] ; then - printf '\r' - else - echo - fi - case ${ans} in - [yY]) return 0;; - *) return 1;; - esac - } - - # Notes: sed not used to avoid case where /usr partition is encrypted. - mode=${key/*:/} && ( [ "${mode}" = "${key}" ] || [ -z "${mode}" ] ) && mode=reg - key=${key/:*/} - case "${mode}" in - gpg|reg) - # handle key on removable device - if [ -n "${remdev}" ] ; then - # temp directory to mount removable device - local mntrem="${RC_SVCDIR}/dm-crypt-remdev.$$" - if [ ! -d "${mntrem}" ] ; then - if ! mkdir -p "${mntrem}" ; then - ewarn "${source} will not be decrypted ..." - einfo "Reason: Unable to create temporary mount point '${mntrem}'" - return - fi - fi - i=0 - einfo "Please insert removable device for ${target}" - while [ ${i} -lt ${dmcrypt_max_timeout:-120} ] ; do - foo="" - if mount -n -o ro "${remdev}" "${mntrem}" 2>/dev/null >/dev/null ; then - # keyfile exists? - if [ ! -e "${mntrem}${key}" ] ; then - umount -n "${mntrem}" - rmdir "${mntrem}" - einfo "Cannot find ${key} on removable media." - read_abort "Abort" ${read_timeout:--t 1} && return - else - key="${mntrem}${key}" - break - fi - else - [ -e "${remdev}" ] \ - && foo="mount failed" \ - || foo="mount source not found" - fi - : $((i += 1)) - read_abort "Stop waiting after $i attempts (${foo})" -t 1 && return - done - else # keyfile ! on removable device - if [ ! -e "${key}" ] ; then - ewarn "${source} will not be decrypted ..." - einfo "Reason: keyfile ${key} does not exist." - return - fi - fi - ;; - *) - ewarn "${source} will not be decrypted ..." - einfo "Reason: mode ${mode} is invalid." - return - ;; - esac - else - mode=none - fi - ebegin " ${target} using: ${options} ${arg1} ${arg2} ${arg3}" - if [ "${mode}" = "gpg" ] ; then - : ${gpg_options:='-q -d'} - # gpg available ? - if type -p gpg >/dev/null ; then - for i in 0 1 2 ; do - # paranoid, don't store key in a variable, pipe it so it stays very little in ram unprotected. - # save stdin stdout stderr "values" - gpg ${gpg_options} ${key} 2>/dev/null | cryptsetup ${options} ${arg1} ${arg2} ${arg3} - ret=$? - [ ${ret} -eq 0 ] && break - done - eend ${ret} "failure running cryptsetup" - else - ewarn "${source} will not be decrypted ..." - einfo "Reason: cannot find gpg application." - einfo "You have to install app-crypt/gnupg first." - einfo "If you have /usr on its own partition, try copying gpg to /bin ." - fi - else - if [ "${mode}" = "reg" ] ; then - cryptsetup ${options} -d ${key} ${arg1} ${arg2} ${arg3} - ret=$? - eend ${ret} "failure running cryptsetup" - else - cryptsetup ${options} ${arg1} ${arg2} ${arg3} - ret=$? - eend ${ret} "failure running cryptsetup" - fi - fi - if [ -d "${mntrem}" ] ; then - umount -n ${mntrem} 2>/dev/null >/dev/null - rmdir ${mntrem} 2>/dev/null >/dev/null - fi - splash svc_input_end ${SVCNAME} >/dev/null 2>&1 - - if [ ${ret} -ne 0 ] ; then - cryptfs_status=1 - else - if [ -n "${pre_mount}" ] ; then - dev="/dev/mapper/${target}" - ebegin " pre_mount: ${pre_mount}" - eval "${pre_mount}" > /dev/null - ewend $? || cryptfs_status=1 - fi - fi -} - -# Run any post_mount commands for an individual mount -# -# Note: This relies on variables localized in the main body below. -dm_crypt_execute_localmount() { - local mount_point - - [ -z "${target}" ] && [ -z "${post_mount}" ] && return - - if ! cryptsetup status ${target} | egrep -q '\/dev/null - eend $? || cryptfs_status=1 - fi -} - -# Lookup optional bootparams -get_bootparam_val() { - # We're given something like: - # foo=bar=cow - # Return the "bar=cow" part. - case $1 in - *\=*) - local key=$(echo "$1" | cut -f1 -d=) - echo "$1" | cut -c $(( ${#key} + 2 )) - ;; - esac -} - -start() { - local header=true cryptfs_status=0 - local gpg_options key loop_file target targetline options pre_mount post_mount source swap remdev - - local x - for x in $(cat /proc/cmdline) ; do - case "${x}" in - key_timeout\=*) - local KEY_TIMEOUT=$(get_bootparam_val "${x}") - if [ ${KEY_TIMEOUT} -gt 0 ] ; then - read_timeout="-t ${KEY_TIMEOUT}" - fi - ;; - esac - done - - while read -u 3 targetline ; do - case ${targetline} in - # skip comments and blank lines - ""|"#"*) continue ;; - # skip service-specific openrc configs #377927 - rc_*) continue ;; - esac - - ${header} && ebegin "Setting up dm-crypt mappings" - header=false - - # check for the start of a new target/swap - case ${targetline} in - target=*|swap=*) - # If we have a target queued up, then execute it - ${execute_hook} - - # Prepare for the next target/swap by resetting variables - unset gpg_options key loop_file target options pre_mount post_mount source swap remdev - ;; - - gpg_options=*|remdev=*|key=*|loop_file=*|options=*|pre_mount=*|post_mount=*|source=*) - if [ -z "${target}${swap}" ] ; then - ewarn "Ignoring setting outside target/swap section: ${targetline}" - continue - fi - ;; - - dmcrypt_max_timeout=*) - # ignore global options - continue - ;; - - *) - ewarn "Skipping invalid line in ${conf_file}: ${targetline}" - ;; - esac - - # Queue this setting for the next call to dm_crypt_execute_xxx - eval "${targetline}" - done 3< ${conf_file} - - # If we have a target queued up, then execute it - ${execute_hook} - - ewend ${cryptfs_status} "Failed to setup dm-crypt devices" -} - -stop() { - local line header - - # Break down all mappings - header=true - egrep "^(target|swap)=" ${conf_file} | \ - while read line ; do - ${header} && einfo "Removing dm-crypt mappings" - header=false - - target= swap= - eval ${line} - - [ -n "${swap}" ] && target=${swap} - if [ -z "${target}" ] ; then - ewarn "invalid line in ${conf_file}: ${line}" - continue - fi - - ebegin " ${target}" - cryptsetup remove ${target} - eend $? - done - - # Break down loop devices - header=true - grep '^source=./dev/loop' ${conf_file} | \ - while read line ; do - ${header} && einfo "Detaching dm-crypt loop devices" - header=false - - source= - eval ${line} - - ebegin " ${source}" - losetup -d "${source}" - eend $? - done - - return 0 -} diff --git a/portage/package.keywords/common b/portage/package.keywords/common index 0e02e4c..b58793f 100644 --- a/portage/package.keywords/common +++ b/portage/package.keywords/common @@ -48,6 +48,7 @@ app-text/docbook2odf-xsl-stylesheets ~dev-perl/Math-Calc-Units-1.70.0 ~dev-python/crcmod-1.7 +~dev-python/fabric-1.7.0 dev-python/fbrehm-libs ~dev-python/iniparse-0.4 ~dev-python/jinja-2.7.1 diff --git a/resolv.conf b/resolv.conf index c683edf..77f917d 100644 --- a/resolv.conf +++ b/resolv.conf @@ -1,5 +1,5 @@ # Generated by net-scripts for interface eth0 domain pb.local search pb.local brehm-online.com dc1.de.profitbricks.net dc2.us.profitbricks.net dc252.de.profitbricks.net uhu-banane.de -nameserver 192.168.178.89 nameserver 192.168.178.30 +nameserver 192.168.178.89 diff --git a/ssh/ssh_config b/ssh/ssh_config index c8afc3d..253075a 100644 --- a/ssh/ssh_config +++ b/ssh/ssh_config @@ -59,4 +59,4 @@ ServerAliveInterval 30 # PermitLocalCommand no # VisualHostKey no # ProxyCommand ssh -q -W %h:%p gateway.example.com - SendEnv LANG LC_* +# SendEnv LANG LC_*