From: root Date: Mon, 30 Jul 2012 18:42:52 +0000 (+0200) Subject: saving uncommitted changes in /etc prior to emerge run X-Git-Url: https://git.uhu-banane.net/?a=commitdiff_plain;h=b7de307863741739e27752036ddab0d267691d5a;p=config%2Fsamara%2Fetc.git saving uncommitted changes in /etc prior to emerge run --- diff --git a/._cfg0000_rc.conf b/._cfg0000_rc.conf new file mode 100644 index 0000000..d3f5eb9 --- /dev/null +++ b/._cfg0000_rc.conf @@ -0,0 +1,135 @@ +# Global OpenRC configuration settings + +# Set rc_interactive to "YES" and you'll be able to press the I key during +# boot so you can choose to start specific services. Set to "NO" to disable +# this feature. +#rc_interactive="YES" + +# If we need to drop to a shell, you can specify it here. +# If not specified we use $SHELL, otherwise the one specified in /etc/passwd, +# otherwise /bin/sh +# Linux users could specify /sbin/sulogin +rc_shell=/sbin/sulogin + +# Do we allow any started service in the runlevel to satisfy the dependency +# or do we want all of them regardless of state? For example, if net.eth0 +# and net.eth1 are in the default runlevel then with rc_depend_strict="NO" +# both will be started, but services that depend on 'net' will work if either +# one comes up. With rc_depend_strict="YES" we would require them both to +# come up. +#rc_depend_strict="YES" + +# rc_hotplug is a list of services that we allow to be hotplugged. +# By default we do not allow hotplugging. +# A hotplugged service is one started by a dynamic dev manager when a matching +# hardware device is found. +# This service is intrinsically included in the boot runlevel. +# To disable services, prefix with a ! +# Example - rc_hotplug="net.wlan !net.*" +# This allows net.wlan and any service not matching net.* to be plugged. +# Example - rc_hotplug="*" +# This allows all services to be hotplugged +#rc_hotplug="*" + +# rc_logger launches a logging daemon to log the entire rc process to +# /var/log/rc.log +# NOTE: Linux systems require the devfs service to be started before +# logging can take place and as such cannot log the sysinit runlevel. +#rc_logger="YES" + +# Through rc_log_path you can specify a custom log file. +# The default value is: /var/log/rc.log +#rc_log_path="/var/log/rc.log" + +# By default we filter the environment for our running scripts. To allow other +# variables through, add them here. Use a * to allow all variables through. +#rc_env_allow="VAR1 VAR2" + +# By default we assume that all daemons will start correctly. +# However, some do not - a classic example is that they fork and return 0 AND +# then child barfs on a configuration error. Or the daemon has a bug and the +# child crashes. You can set the number of milliseconds start-stop-daemon +# waits to check that the daemon is still running after starting here. +# The default is 0 - no checking. +#rc_start_wait=100 + +# rc_nostop is a list of services which will not stop when changing runlevels. +# This still allows the service itself to be stopped when called directly. +#rc_nostop="" + +# rc will attempt to start crashed services by default. +# However, it will not stop them by default as that could bring down other +# critical services. +#rc_crashed_stop=NO +#rc_crashed_start=YES + +############################################################################## +# MISC CONFIGURATION VARIABLES +# There variables are shared between many init scripts + +# Set unicode to YES to turn on unicode support for keyboards and screens. +unicode="YES" + +# Below is the default list of network fstypes. +# +# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs +# nfs nfs4 ocfs2 shfs smbfs +# +# If you would like to add to this list, you can do so by adding your +# own fstypes to the following variable. +#extra_net_fs_list="" + +############################################################################## +# SERVICE CONFIGURATION VARIABLES +# These variables are documented here, but should be configured in +# /etc/conf.d/foo for service foo and NOT enabled here unless you +# really want them to work on a global basis. + +# Some daemons are started and stopped via start-stop-daemon. +# We can set some things on a per service basis, like the nicelevel. +#export SSD_NICELEVEL="-19" + +# Pass ulimit parameters +#rc_ulimit="-u 30" + +# It's possible to define extra dependencies for services like so +#rc_config="/etc/foo" +#rc_need="openvpn" +#rc_use="net.eth0" +#rc_after="clock" +#rc_before="local" +#rc_provide="!net" + +# You can also enable the above commands here for each service. Below is an +# example for service foo. +#rc_foo_config="/etc/foo" +#rc_foo_need="openvpn" +#rc_foo_after="clock" + +# You can also remove dependencies. +# This is mainly used for saying which servies do NOT provide net. +#rc_net_tap0_provide="!net" + +############################################################################## +# LINUX SPECIFIC OPTIONS + +# This is the subsystem type. Valid options on Linux: +# "" - nothing special +# "lxc" - Linux Containers +# "openvz" - Linux OpenVZ +# "prefix" - Prefix +# "uml" - Usermode Linux +# "vserver" - Linux vserver +# "xen0" - Xen0 Domain +# "xenU" - XenU Domain +# If this is commented out, automatic detection will be attempted. +# Note that autodetection will not work in a prefix environment or in a +# linux container. +# +# This should be set to the value representing the environment this file is +# PRESENTLY in, not the virtualization the environment is capable of. +#rc_sys="" + +# This is the number of tty's used in most of the rc-scripts (like +# consolefont, numlock, etc ...) +rc_tty_number=12 diff --git a/.etckeeper b/.etckeeper index 5e0823e..ae6fab3 100755 --- a/.etckeeper +++ b/.etckeeper @@ -37,6 +37,7 @@ mkdir -p './texmf/dvipdfm/config' mkdir -p './texmf/dvips.d' mkdir -p './unixODBC/ODBCDataSources' maybe chmod 0755 '.' +maybe chmod 0644 './._cfg0000_rc.conf' maybe chmod 0700 './.etckeeper' maybe chmod 0600 './.gitignore' maybe chmod 0600 './.pwd.lock' @@ -224,6 +225,9 @@ maybe chmod 0644 './colord.conf' maybe chmod 0644 './colordiffrc' maybe chmod 0644 './colordiffrc-lightbg' maybe chmod 0755 './conf.d' +maybe chmod 0644 './conf.d/._cfg0000_hwclock' +maybe chmod 0644 './conf.d/._cfg0000_keymaps' +maybe chmod 0644 './conf.d/._cfg0000_modules' maybe chmod 0644 './conf.d/acpid' maybe chmod 0644 './conf.d/alsasound' maybe chmod 0644 './conf.d/apache2' diff --git a/conf.d/._cfg0000_hwclock b/conf.d/._cfg0000_hwclock new file mode 100644 index 0000000..4e66ff9 --- /dev/null +++ b/conf.d/._cfg0000_hwclock @@ -0,0 +1,22 @@ +# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as +# Greenwich Mean Time). If that clock is set to the local time, then +# set CLOCK to "local". Note that if you dual boot with Windows, then +# you should set it to "local". +clock="UTC" + +# If you want to set the Hardware Clock to the current System Time +# (software clock) during shutdown, then say "YES" here. +# You normally don't need to do this if you run a ntp daemon. +clock_systohc="NO" + +# If you want to set the system time to the current hardware clock +# during bootup, then say "YES" here. You do not need this if you are +# running a modern kernel with CONFIG_RTC_HCTOSYS set to y. +# Also, be aware that if you set this to "NO", the system time will +# never be saved to the hardware clock unless you set +# clock_systohc="YES" above. +clock_hctosys="YES" + +# If you wish to pass any other arguments to hwclock during bootup, +# you may do so here. Alpha users may wish to use --arc or --srm here. +clock_args="" diff --git a/conf.d/._cfg0000_keymaps b/conf.d/._cfg0000_keymaps new file mode 100644 index 0000000..430383d --- /dev/null +++ b/conf.d/._cfg0000_keymaps @@ -0,0 +1,23 @@ +# Use keymap to specify the default console keymap. There is a complete tree +# of keymaps in /usr/share/keymaps to choose from. +keymap="us" + +# Should we first load the 'windowkeys' console keymap? Most x86 users will +# say "yes" here. Note that non-x86 users should leave it as "no". +# Loading this keymap will enable VT switching (like ALT+Left/Right) +# using the special windows keys on the linux console. +windowkeys="YES" + +# The maps to load for extended keyboards. Most users will leave this as is. +extended_keymaps="" +#extended_keymaps="backspace keypad euro2" + +# Tell dumpkeys(1) to interpret character action codes to be +# from the specified character set. +# This only matters if you set unicode="yes" in /etc/rc.conf. +# For a list of valid sets, run `dumpkeys --help` +dumpkeys_charset="" + +# Some fonts map AltGr-E to the currency symbol ¤ instead of the Euro € +# To fix this, set to "yes" +fix_euro="NO" diff --git a/conf.d/._cfg0000_modules b/conf.d/._cfg0000_modules new file mode 100644 index 0000000..a062a62 --- /dev/null +++ b/conf.d/._cfg0000_modules @@ -0,0 +1,23 @@ +# You can define a list modules for a specific kernel version, +# a released kernel version, a main kernel version or just a list. +# The most specific versioned variable will take precedence. +#modules_2_6_23_gentoo_r5="ieee1394 ohci1394" +#modules_2_6_23="tun ieee1394" +#modules_2_6="tun" +#modules_2="ipv6" +#modules="ohci1394" + +# You can give modules a different name when they load - the new name +# will also be used to pick arguments below. +#modules="dummy:dummy1" + +# Give the modules some arguments if needed, per version if necessary. +# Again, the most specific versioned variable will take precedence. +#module_ieee1394_args="debug" +#module_ieee1394_args_2_6_23_gentoo_r5="debug2" +#module_ieee1394_args_2_6_23="debug3" +#module_ieee1394_args_2_6="debug4" +#module_ieee1394_args_2="debug5" + +# You should consult your kernel documentation and configuration +# for a list of modules and their options.