From: root Samara Date: Tue, 5 Apr 2016 01:10:03 +0000 (+0200) Subject: daily autocommit X-Git-Url: https://git.uhu-banane.net/?a=commitdiff_plain;h=5b883d0f1f74c3ae8c1f8393c4313a65b1c4cdd2;p=config%2Fsamara%2Fetc.git daily autocommit --- diff --git a/config-archive/etc/ssh/ssh_config b/config-archive/etc/ssh/ssh_config index 48477ff..d55c607 100644 --- a/config-archive/etc/ssh/ssh_config +++ b/config-archive/etc/ssh/ssh_config @@ -1,4 +1,4 @@ -# $OpenBSD$ +# $OpenBSD: ssh_config,v 1.28 2013/09/16 11:35:43 sthen Exp $ # This is the ssh client system-wide configuration file. See # ssh_config(5) for more information. This file provides defaults for @@ -43,17 +43,6 @@ ServerAliveInterval 30 # Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc # MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160 # EscapeChar ~ -# AllowedCertPurpose sslserver -# MandatoryCRL no -# CACertificateFile /etc/ssh/ca/ca-bundle.crt -# CACertificatePath /etc/ssh/ca/crt -# CARevocationFile /etc/ssh/ca/ca-bundle.crl -# CARevocationPath /etc/ssh/ca/crl -# UserCACertificateFile ~/.ssh/ca-bundle.crt -# UserCACertificatePath ~/.ssh/crt -# UserCARevocationFile ~/.ssh/ca-bundle.crl -# UserCARevocationPath ~/.ssh/crl -# VAType none # Tunnel no # TunnelDevice any:any # PermitLocalCommand no @@ -62,4 +51,4 @@ ServerAliveInterval 30 # RekeyLimit 1G 1h # Send locale environment variables #367017 -#SendEnv LANG LC_* +SendEnv LANG LC_* diff --git a/config-archive/etc/ssh/ssh_config.1 b/config-archive/etc/ssh/ssh_config.1 index 253075a..48477ff 100644 --- a/config-archive/etc/ssh/ssh_config.1 +++ b/config-archive/etc/ssh/ssh_config.1 @@ -59,4 +59,7 @@ ServerAliveInterval 30 # PermitLocalCommand no # VisualHostKey no # ProxyCommand ssh -q -W %h:%p gateway.example.com -# SendEnv LANG LC_* +# RekeyLimit 1G 1h + +# Send locale environment variables #367017 +#SendEnv LANG LC_* diff --git a/config-archive/etc/ssh/ssh_config.2 b/config-archive/etc/ssh/ssh_config.2 index c8afc3d..253075a 100644 --- a/config-archive/etc/ssh/ssh_config.2 +++ b/config-archive/etc/ssh/ssh_config.2 @@ -59,4 +59,4 @@ ServerAliveInterval 30 # PermitLocalCommand no # VisualHostKey no # ProxyCommand ssh -q -W %h:%p gateway.example.com - SendEnv LANG LC_* +# SendEnv LANG LC_* diff --git a/config-archive/etc/ssh/ssh_config.3 b/config-archive/etc/ssh/ssh_config.3 new file mode 100644 index 0000000..c8afc3d --- /dev/null +++ b/config-archive/etc/ssh/ssh_config.3 @@ -0,0 +1,62 @@ +# $OpenBSD$ + +# This is the ssh client system-wide configuration file. See +# ssh_config(5) for more information. This file provides defaults for +# users, and the values can be changed in per-user configuration files +# or on the command line. + +# Configuration data is parsed as follows: +# 1. command line options +# 2. user-specific file +# 3. system-wide file +# Any configuration value is only changed the first time it is set. +# Thus, host-specific definitions should be at the beginning of the +# configuration file, and defaults at the end. + +# Site-wide defaults for some commonly used options. For a comprehensive +# list of available options, their meanings and defaults, please see the +# ssh_config(5) man page. + +# Host * +# ForwardAgent no +ForwardAgent yes +# ForwardX11 no +ForwardX11 yes +ServerAliveInterval 30 +# RhostsRSAAuthentication no +# RSAAuthentication yes +# PasswordAuthentication yes +# HostbasedAuthentication no +# GSSAPIAuthentication no +# GSSAPIDelegateCredentials no +# BatchMode no +# CheckHostIP yes +# AddressFamily any +# ConnectTimeout 0 +# StrictHostKeyChecking ask +# IdentityFile ~/.ssh/identity +# IdentityFile ~/.ssh/id_rsa +# IdentityFile ~/.ssh/id_dsa +# Port 22 +# Protocol 2,1 +# Cipher 3des +# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc +# MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160 +# EscapeChar ~ +# AllowedCertPurpose sslserver +# MandatoryCRL no +# CACertificateFile /etc/ssh/ca/ca-bundle.crt +# CACertificatePath /etc/ssh/ca/crt +# CARevocationFile /etc/ssh/ca/ca-bundle.crl +# CARevocationPath /etc/ssh/ca/crl +# UserCACertificateFile ~/.ssh/ca-bundle.crt +# UserCACertificatePath ~/.ssh/crt +# UserCARevocationFile ~/.ssh/ca-bundle.crl +# UserCARevocationPath ~/.ssh/crl +# VAType none +# Tunnel no +# TunnelDevice any:any +# PermitLocalCommand no +# VisualHostKey no +# ProxyCommand ssh -q -W %h:%p gateway.example.com + SendEnv LANG LC_* diff --git a/config-archive/etc/ssh/ssh_config.dist b/config-archive/etc/ssh/ssh_config.dist index 42874fe..0f76947 100644 --- a/config-archive/etc/ssh/ssh_config.dist +++ b/config-archive/etc/ssh/ssh_config.dist @@ -1,4 +1,4 @@ -# $OpenBSD: ssh_config,v 1.28 2013/09/16 11:35:43 sthen Exp $ +# $OpenBSD: ssh_config,v 1.30 2016/02/20 23:06:23 sobrado Exp $ # This is the ssh client system-wide configuration file. See # ssh_config(5) for more information. This file provides defaults for @@ -34,8 +34,10 @@ # IdentityFile ~/.ssh/identity # IdentityFile ~/.ssh/id_rsa # IdentityFile ~/.ssh/id_dsa +# IdentityFile ~/.ssh/id_ecdsa +# IdentityFile ~/.ssh/id_ed25519 # Port 22 -# Protocol 2,1 +# Protocol 2 # Cipher 3des # Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc # MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160 diff --git a/config-archive/etc/ssh/sshd_config b/config-archive/etc/ssh/sshd_config index 72a9b2c..e126642 100644 --- a/config-archive/etc/ssh/sshd_config +++ b/config-archive/etc/ssh/sshd_config @@ -1,4 +1,4 @@ -# $OpenBSD: sshd_config,v 1.95 2015/04/27 21:42:48 djm Exp $ +# $OpenBSD: sshd_config,v 1.97 2015/08/06 14:53:21 deraadt Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -41,7 +41,7 @@ # Authentication: #LoginGraceTime 2m -#PermitRootLogin no +#PermitRootLogin prohibit-password #StrictModes yes #MaxAuthTries 6 #MaxSessions 10 diff --git a/config-archive/etc/ssh/sshd_config.1 b/config-archive/etc/ssh/sshd_config.1 index d4463fe..72a9b2c 100644 --- a/config-archive/etc/ssh/sshd_config.1 +++ b/config-archive/etc/ssh/sshd_config.1 @@ -1,4 +1,4 @@ -# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $ +# $OpenBSD: sshd_config,v 1.95 2015/04/27 21:42:48 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -41,7 +41,7 @@ # Authentication: #LoginGraceTime 2m -#PermitRootLogin yes +#PermitRootLogin no #StrictModes yes #MaxAuthTries 6 #MaxSessions 10 @@ -84,7 +84,6 @@ PasswordAuthentication no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes -#GSSAPIStrictAcceptorCheck yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will @@ -113,8 +112,8 @@ UsePrivilegeSeparation sandbox # Default for new installations. #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 -#UseDNS yes -#PidFile /var/run/sshd.pid +#UseDNS no +#PidFile /run/sshd.pid #MaxStartups 10:30:100 #PermitTunnel no #ChrootDirectory none diff --git a/config-archive/etc/ssh/sshd_config.2 b/config-archive/etc/ssh/sshd_config.2 index 47e985c..d4463fe 100644 --- a/config-archive/etc/ssh/sshd_config.2 +++ b/config-archive/etc/ssh/sshd_config.2 @@ -1,4 +1,4 @@ -# $OpenBSD$ +# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -26,72 +26,6 @@ #HostKey /etc/ssh/ssh_host_ecdsa_key #HostKey /etc/ssh/ssh_host_ed25519_key -# "key type names" for X.509 certificates with RSA key -# Note first defined is used in signature operations! -#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1 -#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5 - -# "key type names" for X.509 certificates with DSA key -# Note first defined is used in signature operations! -#X509KeyAlgorithm x509v3-sign-dss,dss-asn1 -#X509KeyAlgorithm x509v3-sign-dss,dss-raw - -# The intended use for the X509 client certificate. Without this option -# no chain verification will be done. Currently accepted uses are case -# insensitive: -# - "sslclient", "SSL client", "SSL_client" or "client" -# - "any", "Any Purpose", "Any_Purpose" or "AnyPurpose" -# - "skip" or ""(empty): don`t check purpose. -#AllowedCertPurpose sslclient - -# Specifies whether self-issued(self-signed) X.509 certificate can be -# allowed only by entry in AutorizedKeysFile that contain matching -# public key or certificate blob. -#KeyAllowSelfIssued no - -# Specifies whether CRL must present in store for all certificates in -# certificate chain with atribute "cRLDistributionPoints" -#MandatoryCRL no - -# A file with multiple certificates of certificate signers -# in PEM format concatenated together. -#CACertificateFile /etc/ssh/ca/ca-bundle.crt - -# A directory with certificates of certificate signers. -# The certificates should have name of the form: [HASH].[NUMBER] -# or have symbolic links to them of this form. -#CACertificatePath /etc/ssh/ca/crt - -# A file with multiple CRL of certificate signers -# in PEM format concatenated together. -#CARevocationFile /etc/ssh/ca/ca-bundle.crl - -# A directory with CRL of certificate signers. -# The CRL should have name of the form: [HASH].r[NUMBER] -# or have symbolic links to them of this form. -#CARevocationPath /etc/ssh/ca/crl - -# LDAP protocol version. -# Example: -# CAldapVersion 2 - -# Note because of OpenSSH options parser limitation -# use %3D instead of = ! -# LDAP initialization may require URL to be escaped, i.e. -# use %2C instead of ,(comma). Escaped URL don't depend from -# LDAP initialization method. -# Example: -# CAldapURL ldap://localhost:389/dc%3Dexample%2Cdc%3Dcom - -# SSH can use "Online Certificate Status Protocol"(OCSP) -# to validate certificate. Set VAType to -# - none : do not use OCSP to validate certificates; -# - ocspcert: validate only certificates that specify `OCSP -# Service Locator' URL; -# - ocspspec: use specified in the configuration 'OCSP Responder' -# to validate all certificates. -#VAType none - # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 @@ -189,13 +123,29 @@ UsePrivilegeSeparation sandbox # Default for new installations. # no default banner path #Banner none +# here are the new patched ldap related tokens +# entries in your LDAP must have posixAccount & ldapPublicKey objectclass +#UseLPK yes +#LpkLdapConf /etc/ldap.conf +#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/ +#LpkUserDN ou=users,dc=phear,dc=org +#LpkGroupDN ou=groups,dc=phear,dc=org +#LpkBindDN cn=Manager,dc=phear,dc=org +#LpkBindPw secret +#LpkServerGroup mail +#LpkFilter (hostAccess=master.phear.org) +#LpkForceTLS no +#LpkSearchTimelimit 3 +#LpkBindTimelimit 3 +#LpkPubKeyAttr sshPublicKey + # override default of no subsystems Subsystem sftp /usr/lib64/misc/sftp-server # the following are HPN related configuration options # tcp receive buffer polling. disable in non autotuning kernels #TcpRcvBufPoll yes - + # disable hpn performance boosts #HPNDisabled no diff --git a/config-archive/etc/ssh/sshd_config.3 b/config-archive/etc/ssh/sshd_config.3 index 7854461..47e985c 100644 --- a/config-archive/etc/ssh/sshd_config.3 +++ b/config-archive/etc/ssh/sshd_config.3 @@ -24,6 +24,7 @@ #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key #HostKey /etc/ssh/ssh_host_ecdsa_key +#HostKey /etc/ssh/ssh_host_ed25519_key # "key type names" for X.509 certificates with RSA key # Note first defined is used in signature operations! @@ -151,8 +152,8 @@ PasswordAuthentication no #GSSAPICleanupCredentials yes #GSSAPIStrictAcceptorCheck yes -# Set this to 'yes' to enable PAM authentication, account processing, -# and session processing. If this is enabled, PAM authentication will +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass @@ -168,6 +169,7 @@ UsePAM yes #X11Forwarding no #X11DisplayOffset 10 #X11UseLocalhost yes +#PermitTTY yes PrintMotd no PrintLastLog no TCPKeepAlive yes @@ -208,6 +210,7 @@ Subsystem sftp /usr/lib64/misc/sftp-server #Match User anoncvs # X11Forwarding no # AllowTcpForwarding no +# PermitTTY no # ForceCommand cvs server # Allow client to pass locale environment variables #367017 diff --git a/config-archive/etc/ssh/sshd_config.4 b/config-archive/etc/ssh/sshd_config.4 index c2dcc3b..7854461 100644 --- a/config-archive/etc/ssh/sshd_config.4 +++ b/config-archive/etc/ssh/sshd_config.4 @@ -27,8 +27,8 @@ # "key type names" for X.509 certificates with RSA key # Note first defined is used in signature operations! -#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5 #X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1 +#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5 # "key type names" for X.509 certificates with DSA key # Note first defined is used in signature operations! @@ -95,6 +95,9 @@ #KeyRegenerationInterval 1h #ServerKeyBits 1024 +# Ciphers and keying +#RekeyLimit default none + # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH @@ -115,6 +118,11 @@ # but this is overridden so installations will only check .ssh/authorized_keys #AuthorizedKeysFile .ssh/authorized_keys +#AuthorizedPrincipalsFile none + +#AuthorizedKeysCommand none +#AuthorizedKeysCommandUser nobody + # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 @@ -164,23 +172,21 @@ PrintMotd no PrintLastLog no TCPKeepAlive yes #UseLogin no -#UsePrivilegeSeparation yes +UsePrivilegeSeparation sandbox # Default for new installations. #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid -#MaxStartups 10 +#MaxStartups 10:30:100 #PermitTunnel no #ChrootDirectory none +#VersionAddendum none # no default banner path #Banner none -# Allow client to pass locale environment variables -AcceptEnv LANG LC_* - # override default of no subsystems Subsystem sftp /usr/lib64/misc/sftp-server @@ -188,18 +194,21 @@ Subsystem sftp /usr/lib64/misc/sftp-server # tcp receive buffer polling. disable in non autotuning kernels #TcpRcvBufPoll yes -# allow the use of the none cipher -#NoneEnabled no - -# disable hpn performance boosts. +# disable hpn performance boosts #HPNDisabled no # buffer size for hpn to non-hpn connections #HPNBufferSize 2048 +# allow the use of the none cipher +#NoneEnabled no + # Example of overriding settings on a per-user basis #Match User anoncvs # X11Forwarding no # AllowTcpForwarding no # ForceCommand cvs server + +# Allow client to pass locale environment variables #367017 +AcceptEnv LANG LC_* diff --git a/config-archive/etc/ssh/sshd_config.5 b/config-archive/etc/ssh/sshd_config.5 new file mode 100644 index 0000000..c2dcc3b --- /dev/null +++ b/config-archive/etc/ssh/sshd_config.5 @@ -0,0 +1,205 @@ +# $OpenBSD$ + +# This is the sshd server system-wide configuration file. See +# sshd_config(5) for more information. + +# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin + +# The strategy used for options in the default sshd_config shipped with +# OpenSSH is to specify options with their default value where +# possible, but leave them commented. Uncommented options override the +# default value. + +#Port 22 +#AddressFamily any +#ListenAddress 0.0.0.0 +#ListenAddress :: + +# The default requires explicit activation of protocol 1 +#Protocol 2 + +# HostKey for protocol version 1 +#HostKey /etc/ssh/ssh_host_key +# HostKeys for protocol version 2 +#HostKey /etc/ssh/ssh_host_rsa_key +#HostKey /etc/ssh/ssh_host_dsa_key +#HostKey /etc/ssh/ssh_host_ecdsa_key + +# "key type names" for X.509 certificates with RSA key +# Note first defined is used in signature operations! +#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5 +#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1 + +# "key type names" for X.509 certificates with DSA key +# Note first defined is used in signature operations! +#X509KeyAlgorithm x509v3-sign-dss,dss-asn1 +#X509KeyAlgorithm x509v3-sign-dss,dss-raw + +# The intended use for the X509 client certificate. Without this option +# no chain verification will be done. Currently accepted uses are case +# insensitive: +# - "sslclient", "SSL client", "SSL_client" or "client" +# - "any", "Any Purpose", "Any_Purpose" or "AnyPurpose" +# - "skip" or ""(empty): don`t check purpose. +#AllowedCertPurpose sslclient + +# Specifies whether self-issued(self-signed) X.509 certificate can be +# allowed only by entry in AutorizedKeysFile that contain matching +# public key or certificate blob. +#KeyAllowSelfIssued no + +# Specifies whether CRL must present in store for all certificates in +# certificate chain with atribute "cRLDistributionPoints" +#MandatoryCRL no + +# A file with multiple certificates of certificate signers +# in PEM format concatenated together. +#CACertificateFile /etc/ssh/ca/ca-bundle.crt + +# A directory with certificates of certificate signers. +# The certificates should have name of the form: [HASH].[NUMBER] +# or have symbolic links to them of this form. +#CACertificatePath /etc/ssh/ca/crt + +# A file with multiple CRL of certificate signers +# in PEM format concatenated together. +#CARevocationFile /etc/ssh/ca/ca-bundle.crl + +# A directory with CRL of certificate signers. +# The CRL should have name of the form: [HASH].r[NUMBER] +# or have symbolic links to them of this form. +#CARevocationPath /etc/ssh/ca/crl + +# LDAP protocol version. +# Example: +# CAldapVersion 2 + +# Note because of OpenSSH options parser limitation +# use %3D instead of = ! +# LDAP initialization may require URL to be escaped, i.e. +# use %2C instead of ,(comma). Escaped URL don't depend from +# LDAP initialization method. +# Example: +# CAldapURL ldap://localhost:389/dc%3Dexample%2Cdc%3Dcom + +# SSH can use "Online Certificate Status Protocol"(OCSP) +# to validate certificate. Set VAType to +# - none : do not use OCSP to validate certificates; +# - ocspcert: validate only certificates that specify `OCSP +# Service Locator' URL; +# - ocspspec: use specified in the configuration 'OCSP Responder' +# to validate all certificates. +#VAType none + +# Lifetime and size of ephemeral version 1 server key +#KeyRegenerationInterval 1h +#ServerKeyBits 1024 + +# Logging +# obsoletes QuietMode and FascistLogging +#SyslogFacility AUTH +#LogLevel INFO + +# Authentication: + +#LoginGraceTime 2m +#PermitRootLogin yes +#StrictModes yes +#MaxAuthTries 6 +#MaxSessions 10 + +#RSAAuthentication yes +#PubkeyAuthentication yes + +# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2 +# but this is overridden so installations will only check .ssh/authorized_keys +#AuthorizedKeysFile .ssh/authorized_keys + +# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts +#RhostsRSAAuthentication no +# similar for protocol version 2 +#HostbasedAuthentication no +# Change to yes if you don't trust ~/.ssh/known_hosts for +# RhostsRSAAuthentication and HostbasedAuthentication +#IgnoreUserKnownHosts no +# Don't read the user's ~/.rhosts and ~/.shosts files +#IgnoreRhosts yes + +# To disable tunneled clear text passwords, change to no here! +PasswordAuthentication no +#PermitEmptyPasswords no + +# Change to no to disable s/key passwords +#ChallengeResponseAuthentication yes + +# Kerberos options +#KerberosAuthentication no +#KerberosOrLocalPasswd yes +#KerberosTicketCleanup yes +#KerberosGetAFSToken no + +# GSSAPI options +#GSSAPIAuthentication no +#GSSAPICleanupCredentials yes +#GSSAPIStrictAcceptorCheck yes + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +UsePAM yes + +#AllowAgentForwarding yes +#AllowTcpForwarding yes +#GatewayPorts no +#X11Forwarding no +#X11DisplayOffset 10 +#X11UseLocalhost yes +PrintMotd no +PrintLastLog no +TCPKeepAlive yes +#UseLogin no +#UsePrivilegeSeparation yes +#PermitUserEnvironment no +#Compression delayed +#ClientAliveInterval 0 +#ClientAliveCountMax 3 +#UseDNS yes +#PidFile /var/run/sshd.pid +#MaxStartups 10 +#PermitTunnel no +#ChrootDirectory none + +# no default banner path +#Banner none + +# Allow client to pass locale environment variables +AcceptEnv LANG LC_* + +# override default of no subsystems +Subsystem sftp /usr/lib64/misc/sftp-server + +# the following are HPN related configuration options +# tcp receive buffer polling. disable in non autotuning kernels +#TcpRcvBufPoll yes + +# allow the use of the none cipher +#NoneEnabled no + +# disable hpn performance boosts. +#HPNDisabled no + +# buffer size for hpn to non-hpn connections +#HPNBufferSize 2048 + + +# Example of overriding settings on a per-user basis +#Match User anoncvs +# X11Forwarding no +# AllowTcpForwarding no +# ForceCommand cvs server diff --git a/config-archive/etc/ssh/sshd_config.dist b/config-archive/etc/ssh/sshd_config.dist index 1647cbe..20d455d 100644 --- a/config-archive/etc/ssh/sshd_config.dist +++ b/config-archive/etc/ssh/sshd_config.dist @@ -1,4 +1,4 @@ -# $OpenBSD: sshd_config,v 1.97 2015/08/06 14:53:21 deraadt Exp $ +# $OpenBSD: sshd_config,v 1.98 2016/02/17 05:29:04 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -107,7 +107,7 @@ PrintMotd no PrintLastLog no #TCPKeepAlive yes #UseLogin no -UsePrivilegeSeparation sandbox # Default for new installations. +#UsePrivilegeSeparation sandbox #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 @@ -141,20 +141,6 @@ UsePrivilegeSeparation sandbox # Default for new installations. # override default of no subsystems Subsystem sftp /usr/lib64/misc/sftp-server -# the following are HPN related configuration options -# tcp receive buffer polling. disable in non autotuning kernels -#TcpRcvBufPoll yes - -# disable hpn performance boosts -#HPNDisabled no - -# buffer size for hpn to non-hpn connections -#HPNBufferSize 2048 - - -# allow the use of the none cipher -#NoneEnabled no - # Example of overriding settings on a per-user basis #Match User anoncvs # X11Forwarding no diff --git a/ssh/._cfg0000_ssh_config b/ssh/._cfg0000_ssh_config deleted file mode 100644 index 0f76947..0000000 --- a/ssh/._cfg0000_ssh_config +++ /dev/null @@ -1,53 +0,0 @@ -# $OpenBSD: ssh_config,v 1.30 2016/02/20 23:06:23 sobrado Exp $ - -# This is the ssh client system-wide configuration file. See -# ssh_config(5) for more information. This file provides defaults for -# users, and the values can be changed in per-user configuration files -# or on the command line. - -# Configuration data is parsed as follows: -# 1. command line options -# 2. user-specific file -# 3. system-wide file -# Any configuration value is only changed the first time it is set. -# Thus, host-specific definitions should be at the beginning of the -# configuration file, and defaults at the end. - -# Site-wide defaults for some commonly used options. For a comprehensive -# list of available options, their meanings and defaults, please see the -# ssh_config(5) man page. - -# Host * -# ForwardAgent no -# ForwardX11 no -# RhostsRSAAuthentication no -# RSAAuthentication yes -# PasswordAuthentication yes -# HostbasedAuthentication no -# GSSAPIAuthentication no -# GSSAPIDelegateCredentials no -# BatchMode no -# CheckHostIP yes -# AddressFamily any -# ConnectTimeout 0 -# StrictHostKeyChecking ask -# IdentityFile ~/.ssh/identity -# IdentityFile ~/.ssh/id_rsa -# IdentityFile ~/.ssh/id_dsa -# IdentityFile ~/.ssh/id_ecdsa -# IdentityFile ~/.ssh/id_ed25519 -# Port 22 -# Protocol 2 -# Cipher 3des -# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc -# MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160 -# EscapeChar ~ -# Tunnel no -# TunnelDevice any:any -# PermitLocalCommand no -# VisualHostKey no -# ProxyCommand ssh -q -W %h:%p gateway.example.com -# RekeyLimit 1G 1h - -# Send locale environment variables #367017 -SendEnv LANG LC_* diff --git a/ssh/._cfg0000_sshd_config b/ssh/._cfg0000_sshd_config deleted file mode 100644 index 20d455d..0000000 --- a/ssh/._cfg0000_sshd_config +++ /dev/null @@ -1,152 +0,0 @@ -# $OpenBSD: sshd_config,v 1.98 2016/02/17 05:29:04 djm Exp $ - -# This is the sshd server system-wide configuration file. See -# sshd_config(5) for more information. - -# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin - -# The strategy used for options in the default sshd_config shipped with -# OpenSSH is to specify options with their default value where -# possible, but leave them commented. Uncommented options override the -# default value. - -#Port 22 -#AddressFamily any -#ListenAddress 0.0.0.0 -#ListenAddress :: - -# The default requires explicit activation of protocol 1 -#Protocol 2 - -# HostKey for protocol version 1 -#HostKey /etc/ssh/ssh_host_key -# HostKeys for protocol version 2 -#HostKey /etc/ssh/ssh_host_rsa_key -#HostKey /etc/ssh/ssh_host_dsa_key -#HostKey /etc/ssh/ssh_host_ecdsa_key -#HostKey /etc/ssh/ssh_host_ed25519_key - -# Lifetime and size of ephemeral version 1 server key -#KeyRegenerationInterval 1h -#ServerKeyBits 1024 - -# Ciphers and keying -#RekeyLimit default none - -# Logging -# obsoletes QuietMode and FascistLogging -#SyslogFacility AUTH -#LogLevel INFO - -# Authentication: - -#LoginGraceTime 2m -#PermitRootLogin prohibit-password -#StrictModes yes -#MaxAuthTries 6 -#MaxSessions 10 - -#RSAAuthentication yes -#PubkeyAuthentication yes - -# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2 -# but this is overridden so installations will only check .ssh/authorized_keys -#AuthorizedKeysFile .ssh/authorized_keys - -#AuthorizedPrincipalsFile none - -#AuthorizedKeysCommand none -#AuthorizedKeysCommandUser nobody - -# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -#RhostsRSAAuthentication no -# similar for protocol version 2 -#HostbasedAuthentication no -# Change to yes if you don't trust ~/.ssh/known_hosts for -# RhostsRSAAuthentication and HostbasedAuthentication -#IgnoreUserKnownHosts no -# Don't read the user's ~/.rhosts and ~/.shosts files -#IgnoreRhosts yes - -# To disable tunneled clear text passwords, change to no here! -PasswordAuthentication no -#PermitEmptyPasswords no - -# Change to no to disable s/key passwords -#ChallengeResponseAuthentication yes - -# Kerberos options -#KerberosAuthentication no -#KerberosOrLocalPasswd yes -#KerberosTicketCleanup yes -#KerberosGetAFSToken no - -# GSSAPI options -#GSSAPIAuthentication no -#GSSAPICleanupCredentials yes - -# Set this to 'yes' to enable PAM authentication, account processing, -# and session processing. If this is enabled, PAM authentication will -# be allowed through the ChallengeResponseAuthentication and -# PasswordAuthentication. Depending on your PAM configuration, -# PAM authentication via ChallengeResponseAuthentication may bypass -# the setting of "PermitRootLogin without-password". -# If you just want the PAM account and session checks to run without -# PAM authentication, then enable this but set PasswordAuthentication -# and ChallengeResponseAuthentication to 'no'. -UsePAM yes - -#AllowAgentForwarding yes -#AllowTcpForwarding yes -#GatewayPorts no -#X11Forwarding no -#X11DisplayOffset 10 -#X11UseLocalhost yes -#PermitTTY yes -PrintMotd no -PrintLastLog no -#TCPKeepAlive yes -#UseLogin no -#UsePrivilegeSeparation sandbox -#PermitUserEnvironment no -#Compression delayed -#ClientAliveInterval 0 -#ClientAliveCountMax 3 -#UseDNS no -#PidFile /run/sshd.pid -#MaxStartups 10:30:100 -#PermitTunnel no -#ChrootDirectory none -#VersionAddendum none - -# no default banner path -#Banner none - -# here are the new patched ldap related tokens -# entries in your LDAP must have posixAccount & ldapPublicKey objectclass -#UseLPK yes -#LpkLdapConf /etc/ldap.conf -#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/ -#LpkUserDN ou=users,dc=phear,dc=org -#LpkGroupDN ou=groups,dc=phear,dc=org -#LpkBindDN cn=Manager,dc=phear,dc=org -#LpkBindPw secret -#LpkServerGroup mail -#LpkFilter (hostAccess=master.phear.org) -#LpkForceTLS no -#LpkSearchTimelimit 3 -#LpkBindTimelimit 3 -#LpkPubKeyAttr sshPublicKey - -# override default of no subsystems -Subsystem sftp /usr/lib64/misc/sftp-server - -# Example of overriding settings on a per-user basis -#Match User anoncvs -# X11Forwarding no -# AllowTcpForwarding no -# PermitTTY no -# ForceCommand cvs server - -# Allow client to pass locale environment variables #367017 -AcceptEnv LANG LC_* diff --git a/ssh/ssh_config b/ssh/ssh_config index d55c607..9b71a7c 100644 --- a/ssh/ssh_config +++ b/ssh/ssh_config @@ -1,4 +1,4 @@ -# $OpenBSD: ssh_config,v 1.28 2013/09/16 11:35:43 sthen Exp $ +# $OpenBSD: ssh_config,v 1.30 2016/02/20 23:06:23 sobrado Exp $ # This is the ssh client system-wide configuration file. See # ssh_config(5) for more information. This file provides defaults for @@ -37,8 +37,10 @@ ServerAliveInterval 30 # IdentityFile ~/.ssh/identity # IdentityFile ~/.ssh/id_rsa # IdentityFile ~/.ssh/id_dsa +# IdentityFile ~/.ssh/id_ecdsa +# IdentityFile ~/.ssh/id_ed25519 # Port 22 -# Protocol 2,1 +# Protocol 2 # Cipher 3des # Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc # MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160 diff --git a/ssh/sshd_config b/ssh/sshd_config index e126642..86df45d 100644 --- a/ssh/sshd_config +++ b/ssh/sshd_config @@ -1,4 +1,4 @@ -# $OpenBSD: sshd_config,v 1.97 2015/08/06 14:53:21 deraadt Exp $ +# $OpenBSD: sshd_config,v 1.98 2016/02/17 05:29:04 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -107,7 +107,7 @@ PrintMotd no PrintLastLog no TCPKeepAlive yes #UseLogin no -UsePrivilegeSeparation sandbox # Default for new installations. +#UsePrivilegeSeparation sandbox #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 @@ -141,20 +141,6 @@ UsePrivilegeSeparation sandbox # Default for new installations. # override default of no subsystems Subsystem sftp /usr/lib64/misc/sftp-server -# the following are HPN related configuration options -# tcp receive buffer polling. disable in non autotuning kernels -#TcpRcvBufPoll yes - -# disable hpn performance boosts -#HPNDisabled no - -# buffer size for hpn to non-hpn connections -#HPNBufferSize 2048 - - -# allow the use of the none cipher -#NoneEnabled no - # Example of overriding settings on a per-user basis #Match User anoncvs # X11Forwarding no