From: Frank Brehm Date: Sat, 12 Mar 2016 06:32:13 +0000 (+0100) Subject: saving uncommitted changes in /etc prior to emerge run X-Git-Url: https://git.uhu-banane.net/?a=commitdiff_plain;h=12223c87d0333c5195d84d61f3f801a6d6cec1b8;p=config%2Fbruni%2Fetc.git saving uncommitted changes in /etc prior to emerge run --- diff --git a/config-archive/etc/etckeeper/etckeeper.conf b/config-archive/etc/etckeeper/etckeeper.conf index a5983d9a..a0b644fb 100644 --- a/config-archive/etc/etckeeper/etckeeper.conf +++ b/config-archive/etc/etckeeper/etckeeper.conf @@ -41,4 +41,4 @@ LOWLEVEL_PACKAGE_MANAGER=qlist # To push each commit to a remote, put the name of the remote here. # (eg, "origin" for git). -PUSH_REMOTE="origin" +#PUSH_REMOTE="origin" diff --git a/config-archive/etc/etckeeper/etckeeper.conf.1 b/config-archive/etc/etckeeper/etckeeper.conf.1 index d346d21d..a5983d9a 100644 --- a/config-archive/etc/etckeeper/etckeeper.conf.1 +++ b/config-archive/etc/etckeeper/etckeeper.conf.1 @@ -30,13 +30,15 @@ DARCS_COMMIT_OPTIONS="-a" #AVOID_COMMIT_BEFORE_INSTALL=1 # The high-level package manager that's being used. -# (apt, pacman-g2, yum etc) +# (apt, pacman-g2, yum, zypper etc) # For gentoo this is emerge -#HIGHLEVEL_PACKAGE_MANAGER=apt HIGHLEVEL_PACKAGE_MANAGER=emerge # The low-level package manager that's being used. -# (dpkg, rpm, pacman-g2, etc) -# For gentoo this is equery -#LOWLEVEL_PACKAGE_MANAGER=dpkg -LOWLEVEL_PACKAGE_MANAGER=equery +# (dpkg, rpm, pacman, pacman-g2, etc) +# For gentoo this is qlist +LOWLEVEL_PACKAGE_MANAGER=qlist + +# To push each commit to a remote, put the name of the remote here. +# (eg, "origin" for git). +PUSH_REMOTE="origin" diff --git a/config-archive/etc/etckeeper/etckeeper.conf.2 b/config-archive/etc/etckeeper/etckeeper.conf.2 new file mode 100644 index 00000000..d346d21d --- /dev/null +++ b/config-archive/etc/etckeeper/etckeeper.conf.2 @@ -0,0 +1,42 @@ +# The VCS to use. +#VCS="hg" +VCS="git" +#VCS="bzr" +#VCS="darcs" + +# Options passed to git commit when run by etckeeper. +GIT_COMMIT_OPTIONS="" + +# Options passed to hg commit when run by etckeeper. +HG_COMMIT_OPTIONS="" + +# Options passed to bzr commit when run by etckeeper. +BZR_COMMIT_OPTIONS="" + +# Options passed to darcs record when run by etckeeper. +DARCS_COMMIT_OPTIONS="-a" + +# Uncomment to avoid etckeeper committing existing changes +# to /etc automatically once per day. +#AVOID_DAILY_AUTOCOMMITS=1 + +# Uncomment the following to avoid special file warning +# (the option is enabled automatically by cronjob regardless). +#AVOID_SPECIAL_FILE_WARNING=1 + +# Uncomment to avoid etckeeper committing existing changes to +# /etc before installation. It will cancel the installation, +# so you can commit the changes by hand. +#AVOID_COMMIT_BEFORE_INSTALL=1 + +# The high-level package manager that's being used. +# (apt, pacman-g2, yum etc) +# For gentoo this is emerge +#HIGHLEVEL_PACKAGE_MANAGER=apt +HIGHLEVEL_PACKAGE_MANAGER=emerge + +# The low-level package manager that's being used. +# (dpkg, rpm, pacman-g2, etc) +# For gentoo this is equery +#LOWLEVEL_PACKAGE_MANAGER=dpkg +LOWLEVEL_PACKAGE_MANAGER=equery diff --git a/config-archive/etc/etckeeper/etckeeper.conf.dist b/config-archive/etc/etckeeper/etckeeper.conf.dist new file mode 100644 index 00000000..0a9c88ba --- /dev/null +++ b/config-archive/etc/etckeeper/etckeeper.conf.dist @@ -0,0 +1,53 @@ +# The VCS to use. +#VCS="hg" +VCS="git" +#VCS="bzr" +#VCS="darcs" + +# Options passed to git commit when run by etckeeper. +GIT_COMMIT_OPTIONS="" + +# Options passed to hg commit when run by etckeeper. +HG_COMMIT_OPTIONS="" + +# Options passed to bzr commit when run by etckeeper. +BZR_COMMIT_OPTIONS="" + +# Options passed to darcs record when run by etckeeper. +DARCS_COMMIT_OPTIONS="-a" + +# Uncomment to avoid etckeeper committing existing changes +# to /etc automatically once per day. +#AVOID_DAILY_AUTOCOMMITS=1 + +# Uncomment the following to avoid special file warning +# (the option is enabled automatically by cronjob regardless). +#AVOID_SPECIAL_FILE_WARNING=1 + +# Uncomment to avoid etckeeper committing existing changes to +# /etc before installation. It will cancel the installation, +# so you can commit the changes by hand. +#AVOID_COMMIT_BEFORE_INSTALL=1 + +# The high-level package manager that's being used. +# (apt, pacman-g2, yum, dnf, zypper etc) +#HIGHLEVEL_PACKAGE_MANAGER=apt + +# Gentoo specific: +# For portage this is emerge +# For paludis this is cave +HIGHLEVEL_PACKAGE_MANAGER=emerge + +# The low-level package manager that's being used. +# (dpkg, rpm, pacman, pacman-g2, etc) +#LOWLEVEL_PACKAGE_MANAGER=dpkg + +# Gentoo specific: +# For portage this is qlist +# For paludis this is cave +LOWLEVEL_PACKAGE_MANAGER=qlist + +# To push each commit to a remote, put the name of the remote here. +# (eg, "origin" for git). Space-separated lists of multiple remotes +# also work (eg, "origin gitlab github" for git). +PUSH_REMOTE="" diff --git a/config-archive/etc/etckeeper/etckeeper.conf.dist.new b/config-archive/etc/etckeeper/etckeeper.conf.dist.new deleted file mode 100644 index c1da4bf7..00000000 --- a/config-archive/etc/etckeeper/etckeeper.conf.dist.new +++ /dev/null @@ -1,44 +0,0 @@ -# The VCS to use. -#VCS="hg" -VCS="git" -#VCS="bzr" -#VCS="darcs" - -# Options passed to git commit when run by etckeeper. -GIT_COMMIT_OPTIONS="" - -# Options passed to hg commit when run by etckeeper. -HG_COMMIT_OPTIONS="" - -# Options passed to bzr commit when run by etckeeper. -BZR_COMMIT_OPTIONS="" - -# Options passed to darcs record when run by etckeeper. -DARCS_COMMIT_OPTIONS="-a" - -# Uncomment to avoid etckeeper committing existing changes -# to /etc automatically once per day. -#AVOID_DAILY_AUTOCOMMITS=1 - -# Uncomment the following to avoid special file warning -# (the option is enabled automatically by cronjob regardless). -#AVOID_SPECIAL_FILE_WARNING=1 - -# Uncomment to avoid etckeeper committing existing changes to -# /etc before installation. It will cancel the installation, -# so you can commit the changes by hand. -#AVOID_COMMIT_BEFORE_INSTALL=1 - -# The high-level package manager that's being used. -# (apt, pacman-g2, yum, zypper etc) -# For gentoo this is emerge -HIGHLEVEL_PACKAGE_MANAGER=emerge - -# The low-level package manager that's being used. -# (dpkg, rpm, pacman, pacman-g2, etc) -# For gentoo this is qlist -LOWLEVEL_PACKAGE_MANAGER=qlist - -# To push each commit to a remote, put the name of the remote here. -# (eg, "origin" for git). -PUSH_REMOTE="" diff --git a/config-archive/etc/libvirt/libvirtd.conf b/config-archive/etc/libvirt/libvirtd.conf index 3fd232d1..f0611c98 100644 --- a/config-archive/etc/libvirt/libvirtd.conf +++ b/config-archive/etc/libvirt/libvirtd.conf @@ -445,14 +445,15 @@ host_uuid = "56a41aab-92b8-4840-b9ef-39a41c8d6b01" # #keepalive_interval = 5 #keepalive_count = 5 + # -# If set to 1, libvirtd will refuse to talk to clients that do not -# support keepalive protocol. Defaults to 0. +# These configuration options are no longer used. There is no way to +# restrict such clients from connecting since they first need to +# connect in order to ask for keepalive. # #keepalive_required = 1 +#admin_keepalive_required = 1 # Keepalive settings for the admin interface #admin_keepalive_interval = 5 #admin_keepalive_count = 5 -# -#admin_keepalive_required = 1 diff --git a/config-archive/etc/libvirt/libvirtd.conf.1 b/config-archive/etc/libvirt/libvirtd.conf.1 index a0f0bb4b..3fd232d1 100644 --- a/config-archive/etc/libvirt/libvirtd.conf.1 +++ b/config-archive/etc/libvirt/libvirtd.conf.1 @@ -107,9 +107,17 @@ unix_sock_group = "libvirt" # control, then you may want to relax this too. #unix_sock_rw_perms = "0770" +# Set the UNIX socket permissions for the admin interface socket. +# +# Default allows only owner (root), do not change it unless you are +# sure to whom you are exposing the access to. +#unix_sock_admin_perms = "0700" + # Set the name of the directory in which sockets will be found/created. #unix_sock_dir = "/var/run/libvirt" + + ################################################################# # # Authentication. @@ -310,6 +318,16 @@ auth_unix_rw = "polkit" # and max_workers parameter #max_client_requests = 5 +# Same processing controls, but this time for the admin interface. +# For description of each option, be so kind to scroll few lines +# upwards. + +#admin_min_workers = 1 +#admin_max_workers = 5 +#admin_max_clients = 5 +#admin_max_queued_clients = 5 +#admin_max_client_requests = 5 + ################################################################# # # Logging controls @@ -432,3 +450,9 @@ host_uuid = "56a41aab-92b8-4840-b9ef-39a41c8d6b01" # support keepalive protocol. Defaults to 0. # #keepalive_required = 1 + +# Keepalive settings for the admin interface +#admin_keepalive_interval = 5 +#admin_keepalive_count = 5 +# +#admin_keepalive_required = 1 diff --git a/config-archive/etc/libvirt/libvirtd.conf.2 b/config-archive/etc/libvirt/libvirtd.conf.2 new file mode 100644 index 00000000..a0f0bb4b --- /dev/null +++ b/config-archive/etc/libvirt/libvirtd.conf.2 @@ -0,0 +1,434 @@ +# Master libvirt daemon configuration file +# +# For further information consult http://libvirt.org/format.html +# +# NOTE: the tests/daemon-conf regression test script requires +# that each "PARAMETER = VALUE" line in this file have the parameter +# name just after a leading "#". + +################################################################# +# +# Network connectivity controls +# + +# Flag listening for secure TLS connections on the public TCP/IP port. +# NB, must pass the --listen flag to the libvirtd process for this to +# have any effect. +# +# It is necessary to setup a CA and issue server certificates before +# using this capability. +# +# This is enabled by default, uncomment this to disable it +#listen_tls = 0 + +# Listen for unencrypted TCP connections on the public TCP/IP port. +# NB, must pass the --listen flag to the libvirtd process for this to +# have any effect. +# +# Using the TCP socket requires SASL authentication by default. Only +# SASL mechanisms which support data encryption are allowed. This is +# DIGEST_MD5 and GSSAPI (Kerberos5) +# +# This is disabled by default, uncomment this to enable it. +listen_tcp = 1 + + + +# Override the port for accepting secure TLS connections +# This can be a port number, or service name +# +#tls_port = "16514" + +# Override the port for accepting insecure TCP connections +# This can be a port number, or service name +# +tcp_port = "1611" + + +# Override the default configuration which binds to all network +# interfaces. This can be a numeric IPv4/6 address, or hostname +# +# If the libvirtd service is started in parallel with network +# startup (e.g. with systemd), binding to addresses other than +# the wildcards (0.0.0.0/::) might not be available yet. +# +#listen_addr = "192.168.0.1" +listen_addr = "127.0.0.1" + + +# Flag toggling mDNS advertizement of the libvirt service. +# +# Alternatively can disable for all services on a host by +# stopping the Avahi daemon +# +# This is disabled by default, uncomment this to enable it +#mdns_adv = 1 + +# Override the default mDNS advertizement name. This must be +# unique on the immediate broadcast network. +# +# The default is "Virtualization Host HOSTNAME", where HOSTNAME +# is substituted for the short hostname of the machine (without domain) +# +#mdns_name = "Virtualization Host Joe Demo" + + +################################################################# +# +# UNIX socket access controls +# + +# Beware that if you are changing *any* of these options, and you use +# socket activation with systemd, you need to adjust the settings in +# the libvirtd.socket file as well since it could impose a security +# risk if you rely on file permission checking only. + +# Set the UNIX domain socket group ownership. This can be used to +# allow a 'trusted' set of users access to management capabilities +# without becoming root. +# +# This is restricted to 'root' by default. +unix_sock_group = "libvirt" + +# Set the UNIX socket permissions for the R/O socket. This is used +# for monitoring VM status only +# +# Default allows any user. If setting group ownership, you may want to +# restrict this too. +#unix_sock_ro_perms = "0777" + +# Set the UNIX socket permissions for the R/W socket. This is used +# for full management of VMs +# +# Default allows only root. If PolicyKit is enabled on the socket, +# the default will change to allow everyone (eg, 0777) +# +# If not using PolicyKit and setting group ownership for access +# control, then you may want to relax this too. +#unix_sock_rw_perms = "0770" + +# Set the name of the directory in which sockets will be found/created. +#unix_sock_dir = "/var/run/libvirt" + +################################################################# +# +# Authentication. +# +# - none: do not perform auth checks. If you can connect to the +# socket you are allowed. This is suitable if there are +# restrictions on connecting to the socket (eg, UNIX +# socket permissions), or if there is a lower layer in +# the network providing auth (eg, TLS/x509 certificates) +# +# - sasl: use SASL infrastructure. The actual auth scheme is then +# controlled from /etc/sasl2/libvirt.conf. For the TCP +# socket only GSSAPI & DIGEST-MD5 mechanisms will be used. +# For non-TCP or TLS sockets, any scheme is allowed. +# +# - polkit: use PolicyKit to authenticate. This is only suitable +# for use on the UNIX sockets. The default policy will +# require a user to supply their own password to gain +# full read/write access (aka sudo like), while anyone +# is allowed read/only access. +# +# Set an authentication scheme for UNIX read-only sockets +# By default socket permissions allow anyone to connect +# +# To restrict monitoring of domains you may wish to enable +# an authentication mechanism here +#auth_unix_ro = "none" + +# Set an authentication scheme for UNIX read-write sockets +# By default socket permissions only allow root. If PolicyKit +# support was compiled into libvirt, the default will be to +# use 'polkit' auth. +# +# If the unix_sock_rw_perms are changed you may wish to enable +# an authentication mechanism here +#auth_unix_rw = "none" +auth_unix_rw = "polkit" +#auth_unix_rw = "sasl" + +# Change the authentication scheme for TCP sockets. +# +# If you don't enable SASL, then all TCP traffic is cleartext. +# Don't do this outside of a dev/test scenario. For real world +# use, always enable SASL and use the GSSAPI or DIGEST-MD5 +# mechanism in /etc/sasl2/libvirt.conf +#auth_tcp = "sasl" + +# Change the authentication scheme for TLS sockets. +# +# TLS sockets already have encryption provided by the TLS +# layer, and limited authentication is done by certificates +# +# It is possible to make use of any SASL authentication +# mechanism as well, by using 'sasl' for this option +#auth_tls = "none" + + +# Change the API access control scheme +# +# By default an authenticated user is allowed access +# to all APIs. Access drivers can place restrictions +# on this. By default the 'nop' driver is enabled, +# meaning no access control checks are done once a +# client has authenticated with libvirtd +# +#access_drivers = [ "polkit" ] + +################################################################# +# +# TLS x509 certificate configuration +# + + +# Override the default server key file path +# +#key_file = "/etc/pki/libvirt/private/serverkey.pem" + +# Override the default server certificate file path +# +#cert_file = "/etc/pki/libvirt/servercert.pem" + +# Override the default CA certificate path +# +#ca_file = "/etc/pki/CA/cacert.pem" + +# Specify a certificate revocation list. +# +# Defaults to not using a CRL, uncomment to enable it +#crl_file = "/etc/pki/CA/crl.pem" + + + +################################################################# +# +# Authorization controls +# + + +# Flag to disable verification of our own server certificates +# +# When libvirtd starts it performs some sanity checks against +# its own certificates. +# +# Default is to always run sanity checks. Uncommenting this +# will disable sanity checks which is not a good idea +#tls_no_sanity_certificate = 1 + +# Flag to disable verification of client certificates +# +# Client certificate verification is the primary authentication mechanism. +# Any client which does not present a certificate signed by the CA +# will be rejected. +# +# Default is to always verify. Uncommenting this will disable +# verification - make sure an IP whitelist is set +#tls_no_verify_certificate = 1 + + +# A whitelist of allowed x509 Distinguished Names +# This list may contain wildcards such as +# +# "C=GB,ST=London,L=London,O=Red Hat,CN=*" +# +# See the POSIX fnmatch function for the format of the wildcards. +# +# NB If this is an empty list, no client can connect, so comment out +# entirely rather than using empty list to disable these checks +# +# By default, no DN's are checked +#tls_allowed_dn_list = ["DN1", "DN2"] + + +# A whitelist of allowed SASL usernames. The format for usernames +# depends on the SASL authentication mechanism. Kerberos usernames +# look like username@REALM +# +# This list may contain wildcards such as +# +# "*@EXAMPLE.COM" +# +# See the POSIX fnmatch function for the format of the wildcards. +# +# NB If this is an empty list, no client can connect, so comment out +# entirely rather than using empty list to disable these checks +# +# By default, no Username's are checked +#sasl_allowed_username_list = ["joe@EXAMPLE.COM", "fred@EXAMPLE.COM" ] + + + +################################################################# +# +# Processing controls +# + +# The maximum number of concurrent client connections to allow +# over all sockets combined. +#max_clients = 5000 + +# The maximum length of queue of connections waiting to be +# accepted by the daemon. Note, that some protocols supporting +# retransmission may obey this so that a later reattempt at +# connection succeeds. +#max_queued_clients = 1000 + +# The maximum length of queue of accepted but not yet +# authenticated clients. The default value is zero, meaning +# the feature is disabled. +#max_anonymous_clients = 20 + +# The minimum limit sets the number of workers to start up +# initially. If the number of active clients exceeds this, +# then more threads are spawned, up to max_workers limit. +# Typically you'd want max_workers to equal maximum number +# of clients allowed +#min_workers = 5 +#max_workers = 20 + + +# The number of priority workers. If all workers from above +# pool are stuck, some calls marked as high priority +# (notably domainDestroy) can be executed in this pool. +#prio_workers = 5 + +# Total global limit on concurrent RPC calls. Should be +# at least as large as max_workers. Beyond this, RPC requests +# will be read into memory and queued. This directly impacts +# memory usage, currently each request requires 256 KB of +# memory. So by default up to 5 MB of memory is used +# +# XXX this isn't actually enforced yet, only the per-client +# limit is used so far +#max_requests = 20 + +# Limit on concurrent requests from a single client +# connection. To avoid one client monopolizing the server +# this should be a small fraction of the global max_requests +# and max_workers parameter +#max_client_requests = 5 + +################################################################# +# +# Logging controls +# + +# Logging level: 4 errors, 3 warnings, 2 information, 1 debug +# basically 1 will log everything possible +# Note: Journald may employ rate limiting of the messages logged +# and thus lock up the libvirt daemon. To use the debug level with +# journald you have to specify it explicitly in 'log_outputs', otherwise +# only information level messages will be logged. +log_level = 2 + +# Logging filters: +# A filter allows to select a different logging level for a given category +# of logs +# The format for a filter is one of: +# x:name +# x:+name +# where name is a string which is matched against source file name, +# e.g., "remote", "qemu", or "util/json", the optional "+" prefix +# tells libvirt to log stack trace for each message matching name, +# and x is the minimal level where matching messages should be logged: +# 1: DEBUG +# 2: INFO +# 3: WARNING +# 4: ERROR +# +# Multiple filters can be defined in a single @filters, they just need to be +# separated by spaces. +# +# e.g. to only get warning or errors from the remote layer and only errors +# from the event layer: +#log_filters="3:remote 4:event" + +# Logging outputs: +# An output is one of the places to save logging information +# The format for an output can be: +# x:stderr +# output goes to stderr +# x:syslog:name +# use syslog for the output and use the given name as the ident +# x:file:file_path +# output to a file, with the given filepath +# x:journald +# output to journald logging system +# In all case the x prefix is the minimal level, acting as a filter +# 1: DEBUG +# 2: INFO +# 3: WARNING +# 4: ERROR +# +# Multiple outputs can be defined, they just need to be separated by spaces. +# e.g. to log all warnings and errors to syslog under the libvirtd ident: +#log_outputs="3:syslog:libvirtd" +log_outputs="2:syslog:libvirtd" +# + +# Log debug buffer size: +# +# This configuration option is no longer used, since the global +# log buffer functionality has been removed. Please configure +# suitable log_outputs/log_filters settings to obtain logs. +#log_buffer_size = 64 + + +################################################################## +# +# Auditing +# +# This setting allows usage of the auditing subsystem to be altered: +# +# audit_level == 0 -> disable all auditing +# audit_level == 1 -> enable auditing, only if enabled on host (default) +# audit_level == 2 -> enable auditing, and exit if disabled on host +# +#audit_level = 2 +# +# If set to 1, then audit messages will also be sent +# via libvirt logging infrastructure. Defaults to 0 +# +#audit_logging = 1 + +################################################################### +# UUID of the host: +# Provide the UUID of the host here in case the command +# 'dmidecode -s system-uuid' does not provide a valid uuid. In case +# 'dmidecode' does not provide a valid UUID and none is provided here, a +# temporary UUID will be generated. +# Keep the format of the example UUID below. UUID must not have all digits +# be the same. + +# NB This default all-zeros UUID will not work. Replace +# it with the output of the 'uuidgen' command and then +# uncomment this entry +#host_uuid = "00000000-0000-0000-0000-000000000000" +host_uuid = "56a41aab-92b8-4840-b9ef-39a41c8d6b01" + +################################################################### +# Keepalive protocol: +# This allows libvirtd to detect broken client connections or even +# dead clients. A keepalive message is sent to a client after +# keepalive_interval seconds of inactivity to check if the client is +# still responding; keepalive_count is a maximum number of keepalive +# messages that are allowed to be sent to the client without getting +# any response before the connection is considered broken. In other +# words, the connection is automatically closed approximately after +# keepalive_interval * (keepalive_count + 1) seconds since the last +# message received from the client. If keepalive_interval is set to +# -1, libvirtd will never send keepalive requests; however clients +# can still send them and the daemon will send responses. When +# keepalive_count is set to 0, connections will be automatically +# closed after keepalive_interval seconds of inactivity without +# sending any keepalive messages. +# +#keepalive_interval = 5 +#keepalive_count = 5 +# +# If set to 1, libvirtd will refuse to talk to clients that do not +# support keepalive protocol. Defaults to 0. +# +#keepalive_required = 1 diff --git a/config-archive/etc/libvirt/libvirtd.conf.dist b/config-archive/etc/libvirt/libvirtd.conf.dist index 514e6e48..5485f985 100644 --- a/config-archive/etc/libvirt/libvirtd.conf.dist +++ b/config-archive/etc/libvirt/libvirtd.conf.dist @@ -344,10 +344,16 @@ # The format for a filter is one of: # x:name # x:+name -# where name is a string which is matched against source file name, -# e.g., "remote", "qemu", or "util/json", the optional "+" prefix -# tells libvirt to log stack trace for each message matching name, -# and x is the minimal level where matching messages should be logged: + +# where name is a string which is matched against the category +# given in the VIR_LOG_INIT() at the top of each libvirt source +# file, e.g., "remote", "qemu", or "util.json" (the name in the +# filter can be a substring of the full category name, in order +# to match multiple similar categories), the optional "+" prefix +# tells libvirt to log stack trace for each message matching +# name, and x is the minimal level where matching messages should +# be logged: + # 1: DEBUG # 2: INFO # 3: WARNING diff --git a/config-archive/usr/share/config/kdm/kdmrc.dist.new b/config-archive/usr/share/config/kdm/kdmrc.dist.new index 8f90e3ee..64c461c6 100644 --- a/config-archive/usr/share/config/kdm/kdmrc.dist.new +++ b/config-archive/usr/share/config/kdm/kdmrc.dist.new @@ -449,7 +449,7 @@ FaceDir=/var/lib/kdm/faces # Random seed for forging saved session types, etc. of unknown users. # This value should be random but constant across the login domain. # Default is 0 -ForgingSeed=1434435070 +ForgingSeed=1457708717 # Specify conversation plugins for the login dialog. Each plugin can be # specified as a base name (which expands to $kde_modulesdir/kgreet_$base) # or as a full pathname. diff --git a/etckeeper/etckeeper.conf b/etckeeper/etckeeper.conf index a0b644fb..c29d2a7e 100644 --- a/etckeeper/etckeeper.conf +++ b/etckeeper/etckeeper.conf @@ -30,15 +30,25 @@ DARCS_COMMIT_OPTIONS="-a" #AVOID_COMMIT_BEFORE_INSTALL=1 # The high-level package manager that's being used. -# (apt, pacman-g2, yum, zypper etc) -# For gentoo this is emerge +# (apt, pacman-g2, yum, dnf, zypper etc) +#HIGHLEVEL_PACKAGE_MANAGER=apt + +# Gentoo specific: +# For portage this is emerge +# For paludis this is cave HIGHLEVEL_PACKAGE_MANAGER=emerge # The low-level package manager that's being used. # (dpkg, rpm, pacman, pacman-g2, etc) -# For gentoo this is qlist +#LOWLEVEL_PACKAGE_MANAGER=dpkg + +# Gentoo specific: +# For portage this is qlist +# For paludis this is cave LOWLEVEL_PACKAGE_MANAGER=qlist # To push each commit to a remote, put the name of the remote here. -# (eg, "origin" for git). +# (eg, "origin" for git). Space-separated lists of multiple remotes +# also work (eg, "origin gitlab github" for git). #PUSH_REMOTE="origin" +PUSH_REMOTE="" diff --git a/libvirt/libvirtd.conf b/libvirt/libvirtd.conf index f0611c98..1e8367f4 100644 --- a/libvirt/libvirtd.conf +++ b/libvirt/libvirtd.conf @@ -347,10 +347,16 @@ log_level = 2 # The format for a filter is one of: # x:name # x:+name -# where name is a string which is matched against source file name, -# e.g., "remote", "qemu", or "util/json", the optional "+" prefix -# tells libvirt to log stack trace for each message matching name, -# and x is the minimal level where matching messages should be logged: + +# where name is a string which is matched against the category +# given in the VIR_LOG_INIT() at the top of each libvirt source +# file, e.g., "remote", "qemu", or "util.json" (the name in the +# filter can be a substring of the full category name, in order +# to match multiple similar categories), the optional "+" prefix +# tells libvirt to log stack trace for each message matching +# name, and x is the minimal level where matching messages should +# be logged: + # 1: DEBUG # 2: INFO # 3: WARNING