--- /dev/null
+# $OpenBSD: ssh_config,v 1.26 2010/01/11 01:39:46 dtucker Exp $
+
+# This is the ssh client system-wide configuration file. See
+# ssh_config(5) for more information. This file provides defaults for
+# users, and the values can be changed in per-user configuration files
+# or on the command line.
+
+# Configuration data is parsed as follows:
+# 1. command line options
+# 2. user-specific file
+# 3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# Site-wide defaults for some commonly used options. For a comprehensive
+# list of available options, their meanings and defaults, please see the
+# ssh_config(5) man page.
+
+# Host *
+# ForwardAgent no
+# ForwardX11 no
+# RhostsRSAAuthentication no
+# RSAAuthentication yes
+# PasswordAuthentication yes
+# HostbasedAuthentication no
+# GSSAPIAuthentication no
+# GSSAPIDelegateCredentials no
+# BatchMode no
+# CheckHostIP yes
+# AddressFamily any
+# ConnectTimeout 0
+# StrictHostKeyChecking ask
+# IdentityFile ~/.ssh/identity
+# IdentityFile ~/.ssh/id_rsa
+# IdentityFile ~/.ssh/id_dsa
+# Port 22
+# Protocol 2,1
+# Cipher 3des
+# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
+# MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160
+# EscapeChar ~
+# Tunnel no
+# TunnelDevice any:any
+# PermitLocalCommand no
+# VisualHostKey no
+# ProxyCommand ssh -q -W %h:%p gateway.example.com
--- /dev/null
+# $OpenBSD: sshd_config,v 1.82 2010/09/06 17:10:19 naddy Exp $
+
+# This is the sshd server system-wide configuration file. See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented. Uncommented options change a
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+# The default requires explicit activation of protocol 1
+#Protocol 2
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+#AuthorizedKeysFile .ssh/authorized_keys
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+PasswordAuthentication no
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication. Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+PrintMotd no
+PrintLastLog no
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10
+#PermitTunnel no
+#ChrootDirectory none
+
+# no default banner path
+#Banner none
+
+# here are the new patched ldap related tokens
+# entries in your LDAP must have posixAccount & ldapPublicKey objectclass
+#UseLPK yes
+#LpkLdapConf /etc/ldap.conf
+#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/
+#LpkUserDN ou=users,dc=phear,dc=org
+#LpkGroupDN ou=groups,dc=phear,dc=org
+#LpkBindDN cn=Manager,dc=phear,dc=org
+#LpkBindPw secret
+#LpkServerGroup mail
+#LpkFilter (hostAccess=master.phear.org)
+#LpkForceTLS no
+#LpkSearchTimelimit 3
+#LpkBindTimelimit 3
+#LpkPubKeyAttr sshPublicKey
+
+# override default of no subsystems
+Subsystem sftp /usr/lib64/misc/sftp-server
+
+# the following are HPN related configuration options
+# tcp receive buffer polling. disable in non autotuning kernels
+#TcpRcvBufPoll yes
+
+# allow the use of the none cipher
+#NoneEnabled no
+
+# disable hpn performance boosts.
+#HPNDisabled no
+
+# buffer size for hpn to non-hpn connections
+#HPNBufferSize 2048
+
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+# X11Forwarding no
+# AllowTcpForwarding no
+# ForceCommand cvs server
projects / config / bruni / etc.git / commitdiff