--- /dev/null
+# /etc/hosts: Local Host Database
+#
+# This file describes a number of aliases-to-address mappings for the for
+# local hosts that share this file.
+#
+# In the presence of the domain name service or NIS, this file may not be
+# consulted at all; see /etc/host.conf for the resolution order.
+#
+
+# IPv4 and IPv6 localhost aliases
+127.0.0.1 localhost
+::1 localhost
+
+#
+# Imaginary network.
+#10.0.0.2 myname
+#10.0.0.3 myfriend
+#
+# According to RFC 1918, you can use the following IP networks for private
+# nets which will never be connected to the Internet:
+#
+# 10.0.0.0 - 10.255.255.255
+# 172.16.0.0 - 172.31.255.255
+# 192.168.0.0 - 192.168.255.255
+#
+# In case you want to be able to connect directly to the Internet (i.e. not
+# behind a NAT, ADSL router, etc...), you need real official assigned
+# numbers. Do not try to invent your own network numbers but instead get one
+# from your network provider (if any) or from your regional registry (ARIN,
+# APNIC, LACNIC, RIPE NCC, or AfriNIC.)
+#
--- /dev/null
+# /etc/profile: login shell setup
+#
+# That this file is used by any Bourne-shell derivative to setup the
+# environment for login shells.
+#
+
+# Load environment settings from profile.env, which is created by
+# env-update from the files in /etc/env.d
+if [ -e /etc/profile.env ] ; then
+ . /etc/profile.env
+fi
+
+# You should override these in your ~/.bashrc (or equivalent) for per-user
+# settings. For system defaults, you can add a new file in /etc/profile.d/.
+export EDITOR=${EDITOR:-/bin/nano}
+export PAGER=${PAGER:-/usr/bin/less}
+
+# 077 would be more secure, but 022 is generally quite realistic
+umask 022
+
+# Set up PATH depending on whether we're root or a normal user.
+# There's no real reason to exclude sbin paths from the normal user,
+# but it can make tab-completion easier when they aren't in the
+# user's PATH to pollute the executable namespace.
+#
+# It is intentional in the following line to use || instead of -o.
+# This way the evaluation can be short-circuited and calling whoami is
+# avoided.
+if [ "$EUID" = "0" ] || [ "$USER" = "root" ] ; then
+ PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:${ROOTPATH}"
+else
+ PATH="/usr/local/bin:/usr/bin:/bin:${PATH}"
+fi
+export PATH
+unset ROOTPATH
+
+if [ -n "${BASH_VERSION}" ] ; then
+ # Newer bash ebuilds include /etc/bash/bashrc which will setup PS1
+ # including color. We leave out color here because not all
+ # terminals support it.
+ if [ -f /etc/bash/bashrc ] ; then
+ # Bash login shells run only /etc/profile
+ # Bash non-login shells run only /etc/bash/bashrc
+ # Since we want to run /etc/bash/bashrc regardless, we source it
+ # from here. It is unfortunate that there is no way to do
+ # this *after* the user's .bash_profile runs (without putting
+ # it in the user's dot-files), but it shouldn't make any
+ # difference.
+ . /etc/bash/bashrc
+ else
+ PS1='\u@\h \w \$ '
+ fi
+else
+ # Setup a bland default prompt. Since this prompt should be useable
+ # on color and non-color terminals, as well as shells that don't
+ # understand sequences such as \h, don't put anything special in it.
+ PS1="${USER:-$(whoami 2>/dev/null)}@$(uname -n 2>/dev/null) \$ "
+fi
+
+for sh in /etc/profile.d/*.sh ; do
+ [ -r "$sh" ] && . "$sh"
+done
+unset sh
--- /dev/null
+# /etc/sysctl.conf
+#
+# For more information on how this file works, please see
+# the manpages sysctl(8) and sysctl.conf(5).
+#
+# In order for this file to work properly, you must first
+# enable 'Sysctl support' in the kernel.
+#
+# Look in /proc/sys/ for all the things you can setup.
+#
+
+# Disables packet forwarding
+net.ipv4.ip_forward = 0
+# Disables IP dynaddr
+#net.ipv4.ip_dynaddr = 0
+# Disable ECN
+#net.ipv4.tcp_ecn = 0
+# Enables source route verification
+net.ipv4.conf.default.rp_filter = 1
+# Enable reverse path
+net.ipv4.conf.all.rp_filter = 1
+
+# Enable SYN cookies (yum!)
+# http://cr.yp.to/syncookies.html
+#net.ipv4.tcp_syncookies = 1
+
+# Disable source route
+#net.ipv4.conf.all.accept_source_route = 0
+#net.ipv4.conf.default.accept_source_route = 0
+
+# Disable redirects
+#net.ipv4.conf.all.accept_redirects = 0
+#net.ipv4.conf.default.accept_redirects = 0
+
+# Disable secure redirects
+#net.ipv4.conf.all.secure_redirects = 0
+#net.ipv4.conf.default.secure_redirects = 0
+
+# Ignore ICMP broadcasts
+#net.ipv4.icmp_echo_ignore_broadcasts = 1
+
+# Disables the magic-sysrq key
+#kernel.sysrq = 0
+# When the kernel panics, automatically reboot in 3 seconds
+#kernel.panic = 3
+# Allow for more PIDs (cool factor!); may break some programs
+#kernel.pid_max = 999999
+
+# You should compile nfsd into the kernel or add it
+# to modules.autoload for this to work properly
+# TCP Port for lock manager
+#fs.nfs.nlm_tcpport = 0
+# UDP Port for lock manager
+#fs.nfs.nlm_udpport = 0
PATH="/opt/bin"
ROOTPATH="/opt/bin"
-LDPATH="/usr/local/lib"
MANPATH="/usr/local/share/man:/usr/share/man"
INFOPATH="/usr/share/info"
CONFIG_PROTECT_MASK="/etc/gentoo-release"
+LDPATH='/lib64:/usr/lib64:/usr/local/lib64:/lib32:/usr/lib32:/usr/local/lib32:/lib:/usr/lib:/usr/local/lib'
-Gentoo Base System release 2.0.3
+Gentoo Base System release 2.1
projects / config / bruni / etc.git / commitdiff