+++ /dev/null
-##
-## Authentication processes
-##
-
-# Disable LOGIN command and all other plaintext authentications unless
-# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP
-# matches the local IP (ie. you're connecting from the same computer), the
-# connection is considered secure and plaintext authentication is allowed.
-#disable_plaintext_auth = yes
-
-# Authentication cache size (e.g. 10M). 0 means it's disabled. Note that
-# bsdauth, PAM and vpopmail require cache_key to be set for caching to be used.
-#auth_cache_size = 0
-# Time to live for cached data. After TTL expires the cached record is no
-# longer used, *except* if the main database lookup returns internal failure.
-# We also try to handle password changes automatically: If user's previous
-# authentication was successful, but this one wasn't, the cache isn't used.
-# For now this works only with plaintext authentication.
-#auth_cache_ttl = 1 hour
-# TTL for negative hits (user not found, password mismatch).
-# 0 disables caching them completely.
-#auth_cache_negative_ttl = 1 hour
-
-# Space separated list of realms for SASL authentication mechanisms that need
-# them. You can leave it empty if you don't want to support multiple realms.
-# Many clients simply use the first one listed here, so keep the default realm
-# first.
-#auth_realms =
-
-# Default realm/domain to use if none was specified. This is used for both
-# SASL realms and appending @domain to username in plaintext logins.
-#auth_default_realm =
-
-# List of allowed characters in username. If the user-given username contains
-# a character not listed in here, the login automatically fails. This is just
-# an extra check to make sure user can't exploit any potential quote escaping
-# vulnerabilities with SQL/LDAP databases. If you want to allow all characters,
-# set this value to empty.
-#auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@
-
-# Username character translations before it's looked up from databases. The
-# value contains series of from -> to characters. For example "#@/@" means
-# that '#' and '/' characters are translated to '@'.
-#auth_username_translation =
-
-# Username formatting before it's looked up from databases. You can use
-# the standard variables here, eg. %Lu would lowercase the username, %n would
-# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into
-# "-AT-". This translation is done after auth_username_translation changes.
-#auth_username_format =
-
-# If you want to allow master users to log in by specifying the master
-# username within the normal username string (ie. not using SASL mechanism's
-# support for it), you can specify the separator character here. The format
-# is then <username><separator><master username>. UW-IMAP uses "*" as the
-# separator, so that could be a good choice.
-#auth_master_user_separator =
-
-# Username to use for users logging in with ANONYMOUS SASL mechanism
-#auth_anonymous_username = anonymous
-
-# Maximum number of dovecot-auth worker processes. They're used to execute
-# blocking passdb and userdb queries (eg. MySQL and PAM). They're
-# automatically created and destroyed as needed.
-#auth_worker_max_count = 30
-
-# Host name to use in GSSAPI principal names. The default is to use the
-# name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab
-# entries.
-#auth_gssapi_hostname =
-
-# Kerberos keytab to use for the GSSAPI mechanism. Will use the system
-# default (usually /etc/krb5.keytab) if not specified. You may need to change
-# the auth service to run as root to be able to read this file.
-#auth_krb5_keytab =
-
-# Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and
-# ntlm_auth helper. <doc/wiki/Authentication/Mechanisms/Winbind.txt>
-#auth_use_winbind = no
-
-# Path for Samba's ntlm_auth helper binary.
-#auth_winbind_helper_path = /usr/bin/ntlm_auth
-
-# Time to delay before replying to failed authentications.
-#auth_failure_delay = 2 secs
-
-# Require a valid SSL client certificate or the authentication fails.
-#auth_ssl_require_client_cert = no
-
-# Take the username from client's SSL certificate, using
-# X509_NAME_get_text_by_NID() which returns the subject's DN's
-# CommonName.
-#auth_ssl_username_from_cert = no
-
-# Space separated list of wanted authentication mechanisms:
-# plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey
-# gss-spnego
-# NOTE: See also disable_plaintext_auth setting.
-auth_mechanisms = plain
-
-##
-## Password and user databases
-##
-
-#
-# Password database is used to verify user's password (and nothing more).
-# You can have multiple passdbs and userdbs. This is useful if you want to
-# allow both system users (/etc/passwd) and virtual users to login without
-# duplicating the system users into virtual database.
-#
-# <doc/wiki/PasswordDatabase.txt>
-#
-# User database specifies where mails are located and what user/group IDs
-# own them. For single-UID configuration use "static" userdb.
-#
-# <doc/wiki/UserDatabase.txt>
-
-#!include auth-deny.conf.ext
-#!include auth-master.conf.ext
-
-!include auth-system.conf.ext
-!include auth-sql.conf.ext
-!include auth-ldap.conf.ext
-#!include auth-passwdfile.conf.ext
-#!include auth-checkpassword.conf.ext
-#!include auth-vpopmail.conf.ext
-#!include auth-static.conf.ext
+++ /dev/null
-##
-## Director-specific settings.
-##
-
-# Director can be used by Dovecot proxy to keep a temporary user -> mail server
-# mapping. As long as user has simultaneous connections, the user is always
-# redirected to the same server. Each proxy server is running its own director
-# process, and the directors are communicating the state to each others.
-# Directors are mainly useful with NFS-like setups.
-
-# List of IPs or hostnames to all director servers, including ourself.
-# Ports can be specified as ip:port. The default port is the same as
-# what director service's inet_listener is using.
-#director_servers =
-
-# List of IPs or hostnames to all backend mail servers. Ranges are allowed
-# too, like 10.0.0.10-10.0.0.30.
-#director_mail_servers =
-
-# How long to redirect users to a specific server after it no longer has
-# any connections.
-#director_user_expire = 15 min
-
-# TCP/IP port that accepts doveadm connections (instead of director connections)
-# If you enable this, you'll also need to add inet_listener for the port.
-#director_doveadm_port = 0
-
-# To enable director service, uncomment the modes and assign a port.
-service director {
- unix_listener login/director {
- #mode = 0666
- }
- fifo_listener login/proxy-notify {
- #mode = 0666
- }
- unix_listener director-userdb {
- #mode = 0600
- }
- inet_listener {
- #port =
- }
-}
-
-# Enable director for the wanted login services by telling them to
-# connect to director socket instead of the default login socket:
-service imap-login {
- #executable = imap-login director
-}
-service pop3-login {
- #executable = pop3-login director
-}
-
-# Enable director for LMTP proxying:
-protocol lmtp {
- #auth_socket_path = director-userdb
-}
+++ /dev/null
-##
-## Log destination.
-##
-
-# Log file to use for error messages. "syslog" logs to syslog,
-# /dev/stderr logs to stderr.
-#log_path = syslog
-
-# Log file to use for informational messages. Defaults to log_path.
-#info_log_path =
-# Log file to use for debug messages. Defaults to info_log_path.
-#debug_log_path =
-
-# Syslog facility to use if you're logging to syslog. Usually if you don't
-# want to use "mail", you'll use local0..local7. Also other standard
-# facilities are supported.
-#syslog_facility = mail
-
-##
-## Logging verbosity and debugging.
-##
-
-# Log unsuccessful authentication attempts and the reasons why they failed.
-#auth_verbose = no
-
-# In case of password mismatches, log the attempted password. Valid values are
-# no, plain and sha1. sha1 can be useful for detecting brute force password
-# attempts vs. user simply trying the same password over and over again.
-#auth_verbose_passwords = no
-
-# Even more verbose logging for debugging purposes. Shows for example SQL
-# queries.
-#auth_debug = no
-
-# In case of password mismatches, log the passwords and used scheme so the
-# problem can be debugged. Enabling this also enables auth_debug.
-#auth_debug_passwords = no
-
-# Enable mail process debugging. This can help you figure out why Dovecot
-# isn't finding your mails.
-#mail_debug = no
-
-# Show protocol level SSL errors.
-#verbose_ssl = no
-
-# mail_log plugin provides more event logging for mail processes.
-plugin {
- # Events to log. Also available: flag_change append
- #mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename
- # Available fields: uid, box, msgid, from, subject, size, vsize, flags
- # size and vsize are available only for expunge and copy events.
- #mail_log_fields = uid box msgid size
-}
-
-##
-## Log formatting.
-##
-
-# Prefix for each line written to log file. % codes are in strftime(3)
-# format.
-#log_timestamp = "%b %d %H:%M:%S "
-
-# Space-separated list of elements we want to log. The elements which have
-# a non-empty variable value are joined together to form a comma-separated
-# string.
-#login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c
-
-# Login log format. %$ contains login_log_format_elements string, %s contains
-# the data we want to log.
-#login_log_format = %$: %s
-
-# Log prefix for mail processes. See doc/wiki/Variables.txt for list of
-# possible variables you can use.
-#mail_log_prefix = "%s(%u): "
-
-# Format to use for logging mail deliveries. You can use variables:
-# %$ - Delivery status message (e.g. "saved to INBOX")
-# %m - Message-ID
-# %s - Subject
-# %f - From address
-# %p - Physical size
-# %w - Virtual size
-#deliver_log_format = msgid=%m: %$
+++ /dev/null
-##
-## Mailbox locations and namespaces
-##
-
-# Location for users' mailboxes. The default is empty, which means that Dovecot
-# tries to find the mailboxes automatically. This won't work if the user
-# doesn't yet have any mail, so you should explicitly tell Dovecot the full
-# location.
-#
-# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
-# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
-# kept. This is called the "root mail directory", and it must be the first
-# path given in the mail_location setting.
-#
-# There are a few special variables you can use, eg.:
-#
-# %u - username
-# %n - user part in user@domain, same as %u if there's no domain
-# %d - domain part in user@domain, empty if there's no domain
-# %h - home directory
-#
-# See doc/wiki/Variables.txt for full list. Some examples:
-#
-# mail_location = maildir:~/Maildir
-# mail_location = mbox:~/mail:INBOX=/var/mail/%u
-# mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n
-#
-# <doc/wiki/MailLocation.txt>
-#
-mail_location = maildir:~/.maildir
-
-# If you need to set multiple mailbox locations or want to change default
-# namespace settings, you can do it by defining namespace sections.
-#
-# You can have private, shared and public namespaces. Private namespaces
-# are for user's personal mails. Shared namespaces are for accessing other
-# users' mailboxes that have been shared. Public namespaces are for shared
-# mailboxes that are managed by sysadmin. If you create any shared or public
-# namespaces you'll typically want to enable ACL plugin also, otherwise all
-# users can access all the shared mailboxes, assuming they have permissions
-# on filesystem level to do so.
-#
-# REMEMBER: If you add any namespaces, the default namespace must be added
-# explicitly, ie. mail_location does nothing unless you have a namespace
-# without a location setting. Default namespace is simply done by having a
-# namespace with empty prefix.
-#namespace {
- # Namespace type: private, shared or public
- #type = private
-
- # Hierarchy separator to use. You should use the same separator for all
- # namespaces or some clients get confused. '/' is usually a good one.
- # The default however depends on the underlying mail storage format.
- #separator =
-
- # Prefix required to access this namespace. This needs to be different for
- # all namespaces. For example "Public/".
- #prefix =
-
- # Physical location of the mailbox. This is in same format as
- # mail_location, which is also the default for it.
- #location =
-
- # There can be only one INBOX, and this setting defines which namespace
- # has it.
- #inbox = no
-
- # If namespace is hidden, it's not advertised to clients via NAMESPACE
- # extension. You'll most likely also want to set list=no. This is mostly
- # useful when converting from another server with different namespaces which
- # you want to deprecate but still keep working. For example you can create
- # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/".
- #hidden = no
-
- # Show the mailboxes under this namespace with LIST command. This makes the
- # namespace visible for clients that don't support NAMESPACE extension.
- # "children" value lists child mailboxes, but hides the namespace prefix.
- #list = yes
-
- # Namespace handles its own subscriptions. If set to "no", the parent
- # namespace handles them (empty prefix should always have this as "yes")
- #subscriptions = yes
-#}
-
-# Example shared namespace configuration
-#namespace {
- #type = shared
- #separator = /
-
- # Mailboxes are visible under "shared/user@domain/"
- # %%n, %%d and %%u are expanded to the destination user.
- #prefix = shared/%%u/
-
- # Mail location for other users' mailboxes. Note that %variables and ~/
- # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the
- # destination user's data.
- #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u
-
- # Use the default namespace for saving subscriptions.
- #subscriptions = no
-
- # List the shared/ namespace only if there are visible shared mailboxes.
- #list = children
-#}
-
-# System user and group used to access mails. If you use multiple, userdb
-# can override these by returning uid or gid fields. You can use either numbers
-# or names. <doc/wiki/UserIds.txt>
-#mail_uid =
-#mail_gid =
-
-# Group to enable temporarily for privileged operations. Currently this is
-# used only with INBOX when either its initial creation or dotlocking fails.
-# Typically this is set to "mail" to give access to /var/mail.
-#mail_privileged_group =
-
-# Grant access to these supplementary groups for mail processes. Typically
-# these are used to set up access to shared mailboxes. Note that it may be
-# dangerous to set these if users can create symlinks (e.g. if "mail" group is
-# set here, ln -s /var/mail ~/mail/var could allow a user to delete others'
-# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it).
-#mail_access_groups =
-
-# Allow full filesystem access to clients. There's no access checks other than
-# what the operating system does for the active UID/GID. It works with both
-# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/
-# or ~user/.
-#mail_full_filesystem_access = no
-
-##
-## Mail processes
-##
-
-# Don't use mmap() at all. This is required if you store indexes to shared
-# filesystems (NFS or clustered filesystem).
-#mmap_disable = no
-
-# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL
-# since version 3, so this should be safe to use nowadays by default.
-#dotlock_use_excl = yes
-
-# When to use fsync() or fdatasync() calls:
-# optimized (default): Whenever necessary to avoid losing important data
-# always: Useful with e.g. NFS when write()s are delayed
-# never: Never use it (best performance, but crashes can lose data)
-#mail_fsync = optimized
-
-# Mail storage exists in NFS. Set this to yes to make Dovecot flush NFS caches
-# whenever needed. If you're using only a single mail server this isn't needed.
-#mail_nfs_storage = no
-# Mail index files also exist in NFS. Setting this to yes requires
-# mmap_disable=yes and fsync_disable=no.
-#mail_nfs_index = no
-
-# Locking method for index files. Alternatives are fcntl, flock and dotlock.
-# Dotlocking uses some tricks which may create more disk I/O than other locking
-# methods. NFS users: flock doesn't work, remember to change mmap_disable.
-#lock_method = fcntl
-
-# Directory in which LDA/LMTP temporarily stores incoming mails >128 kB.
-#mail_temp_dir = /tmp
-
-# Valid UID range for users, defaults to 500 and above. This is mostly
-# to make sure that users can't log in as daemons or other system users.
-# Note that denying root logins is hardcoded to dovecot binary and can't
-# be done even if first_valid_uid is set to 0.
-#first_valid_uid = 500
-#last_valid_uid = 0
-
-# Valid GID range for users, defaults to non-root/wheel. Users having
-# non-valid GID as primary group ID aren't allowed to log in. If user
-# belongs to supplementary groups with non-valid GIDs, those groups are
-# not set.
-#first_valid_gid = 1
-#last_valid_gid = 0
-
-# Maximum allowed length for mail keyword name. It's only forced when trying
-# to create new keywords.
-#mail_max_keyword_length = 50
-
-# ':' separated list of directories under which chrooting is allowed for mail
-# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too).
-# This setting doesn't affect login_chroot, mail_chroot or auth chroot
-# settings. If this setting is empty, "/./" in home dirs are ignored.
-# WARNING: Never add directories here which local users can modify, that
-# may lead to root exploit. Usually this should be done only if you don't
-# allow shell access for users. <doc/wiki/Chrooting.txt>
-#valid_chroot_dirs =
-
-# Default chroot directory for mail processes. This can be overridden for
-# specific users in user database by giving /./ in user's home directory
-# (eg. /home/./user chroots into /home). Note that usually there is no real
-# need to do chrooting, Dovecot doesn't allow users to access files outside
-# their mail directory anyway. If your home directories are prefixed with
-# the chroot directory, append "/." to mail_chroot. <doc/wiki/Chrooting.txt>
-#mail_chroot =
-
-# UNIX socket path to master authentication server to find users.
-# This is used by imap (for shared users) and lda.
-#auth_socket_path = /var/run/dovecot/auth-userdb
-
-# Directory where to look up mail plugins.
-#mail_plugin_dir = /usr/lib/dovecot
-
-# Space separated list of plugins to load for all services. Plugins specific to
-# IMAP, LDA, etc. are added to this list in their own .conf files.
-#mail_plugins =
-
-##
-## Mailbox handling optimizations
-##
-
-# The minimum number of mails in a mailbox before updates are done to cache
-# file. This allows optimizing Dovecot's behavior to do less disk writes at
-# the cost of more disk reads.
-#mail_cache_min_mail_count = 0
-
-# When IDLE command is running, mailbox is checked once in a while to see if
-# there are any new mails or other changes. This setting defines the minimum
-# time to wait between those checks. Dovecot can also use dnotify, inotify and
-# kqueue to find out immediately when changes occur.
-#mailbox_idle_check_interval = 30 secs
-
-# Save mails with CR+LF instead of plain LF. This makes sending those mails
-# take less CPU, especially with sendfile() syscall with Linux and FreeBSD.
-# But it also creates a bit more disk I/O which may just make it slower.
-# Also note that if other software reads the mboxes/maildirs, they may handle
-# the extra CRs wrong and cause problems.
-#mail_save_crlf = no
-
-##
-## Maildir-specific settings
-##
-
-# By default LIST command returns all entries in maildir beginning with a dot.
-# Enabling this option makes Dovecot return only entries which are directories.
-# This is done by stat()ing each entry, so it causes more disk I/O.
-# (For systems setting struct dirent->d_type, this check is free and it's
-# done always regardless of this setting)
-#maildir_stat_dirs = no
-
-# When copying a message, do it with hard links whenever possible. This makes
-# the performance much better, and it's unlikely to have any side effects.
-#maildir_copy_with_hardlinks = yes
-
-# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only
-# when its mtime changes unexpectedly or when we can't find the mail otherwise.
-#maildir_very_dirty_syncs = no
-
-##
-## mbox-specific settings
-##
-
-# Which locking methods to use for locking mbox. There are four available:
-# dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe
-# solution. If you want to use /var/mail/ like directory, the users
-# will need write access to that directory.
-# dotlock_try: Same as dotlock, but if it fails because of permissions or
-# because there isn't enough disk space, just skip it.
-# fcntl : Use this if possible. Works with NFS too if lockd is used.
-# flock : May not exist in all systems. Doesn't work with NFS.
-# lockf : May not exist in all systems. Doesn't work with NFS.
-#
-# You can use multiple locking methods; if you do the order they're declared
-# in is important to avoid deadlocks if other MTAs/MUAs are using multiple
-# locking methods as well. Some operating systems don't allow using some of
-# them simultaneously.
-#mbox_read_locks = fcntl
-#mbox_write_locks = dotlock fcntl
-
-# Maximum time to wait for lock (all of them) before aborting.
-#mbox_lock_timeout = 5 mins
-
-# If dotlock exists but the mailbox isn't modified in any way, override the
-# lock file after this much time.
-#mbox_dotlock_change_timeout = 2 mins
-
-# When mbox changes unexpectedly we have to fully read it to find out what
-# changed. If the mbox is large this can take a long time. Since the change
-# is usually just a newly appended mail, it'd be faster to simply read the
-# new mails. If this setting is enabled, Dovecot does this but still safely
-# fallbacks to re-reading the whole mbox file whenever something in mbox isn't
-# how it's expected to be. The only real downside to this setting is that if
-# some other MUA changes message flags, Dovecot doesn't notice it immediately.
-# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK
-# commands.
-#mbox_dirty_syncs = yes
-
-# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE,
-# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored.
-#mbox_very_dirty_syncs = no
-
-# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK
-# commands and when closing the mailbox). This is especially useful for POP3
-# where clients often delete all mails. The downside is that our changes
-# aren't immediately visible to other MUAs.
-#mbox_lazy_writes = yes
-
-# If mbox size is smaller than this (e.g. 100k), don't write index files.
-# If an index file already exists it's still read, just not updated.
-#mbox_min_index_size = 0
-
-##
-## mdbox-specific settings
-##
-
-# Maximum dbox file size until it's rotated.
-#mdbox_rotate_size = 2M
-
-# Maximum dbox file age until it's rotated. Typically in days. Day begins
-# from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled.
-#mdbox_rotate_interval = 1d
-
-# When creating new mdbox files, immediately preallocate their size to
-# mdbox_rotate_size. This setting currently works only in Linux with some
-# filesystems (ext4, xfs).
-#mdbox_preallocate_space = no
-
-##
-## Mail attachments
-##
-
-# sdbox and mdbox support saving mail attachments to external files, which
-# also allows single instance storage for them. Other backends don't support
-# this for now.
-
-# WARNING: This feature hasn't been tested much yet. Use at your own risk.
-
-# Directory root where to store mail attachments. Disabled, if empty.
-#mail_attachment_dir =
-
-# Attachments smaller than this aren't saved externally. It's also possible to
-# write a plugin to disable saving specific attachments externally.
-#mail_attachment_min_size = 128k
-
-# Filesystem backend to use for saving attachments:
-# posix : No SiS done by Dovecot (but this might help FS's own deduplication)
-# sis posix : SiS with immediate byte-by-byte comparison during saving
-# sis-queue posix : SiS with delayed comparison and deduplication
-#mail_attachment_fs = sis posix
-
-# Hash format to use in attachment filenames. You can add any text and
-# variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}.
-# Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits
-#mail_attachment_hash = %{sha1}
+++ /dev/null
-#default_process_limit = 100
-#default_client_limit = 1000
-
-# Default VSZ (virtual memory size) limit for service processes. This is mainly
-# intended to catch and kill processes that leak memory before they eat up
-# everything.
-#default_vsz_limit = 256M
-
-# Login user is internally used by login processes. This is the most untrusted
-# user in Dovecot system. It shouldn't have access to anything at all.
-#default_login_user = dovenull
-
-# Internal user is used by unprivileged processes. It should be separate from
-# login user, so that login processes can't disturb other processes.
-#default_internal_user = dovecot
-
-service imap-login {
- inet_listener imap {
- #port = 143
- }
- inet_listener imaps {
- #port = 993
- #ssl = yes
- }
-
- # Number of connections to handle before starting a new process. Typically
- # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0
- # is faster. <doc/wiki/LoginProcess.txt>
- #service_count = 1
-
- # Number of processes to always keep waiting for more connections.
- #process_min_avail = 0
-
- # If you set service_count=0, you probably need to grow this.
- #vsz_limit = 64M
-}
-
-service pop3-login {
- inet_listener pop3 {
- #port = 110
- }
- inet_listener pop3s {
- #port = 995
- #ssl = yes
- }
-}
-
-service lmtp {
- unix_listener lmtp {
- #mode = 0666
- }
-
- # Create inet listener only if you can't use the above UNIX socket
- #inet_listener lmtp {
- # Avoid making LMTP visible for the entire internet
- #address =
- #port =
- #}
-}
-
-service imap {
- # Most of the memory goes to mmap()ing files. You may need to increase this
- # limit if you have huge mailboxes.
- #vsz_limit = 256M
-
- # Max. number of IMAP processes (connections)
- #process_limit = 1024
-}
-
-service pop3 {
- # Max. number of POP3 processes (connections)
- #process_limit = 1024
-}
-
-service auth {
- # auth_socket_path points to this userdb socket by default. It's typically
- # used by dovecot-lda, doveadm, possibly imap process, etc. Its default
- # permissions make it readable only by root, but you may need to relax these
- # permissions. Users that have access to this socket are able to get a list
- # of all usernames and get results of everyone's userdb lookups.
- unix_listener auth-userdb {
- #mode = 0600
- #user =
- #group =
- }
-
- # Postfix smtp-auth
- #unix_listener /var/spool/postfix/private/auth {
- # mode = 0666
- #}
-
- # Auth process is run as this user.
- #user = $default_internal_user
-}
-
-service auth-worker {
- # Auth worker process is run as root by default, so that it can access
- # /etc/shadow. If this isn't necessary, the user should be changed to
- # $default_internal_user.
- #user = root
-}
-
-service dict {
- # If dict proxy is used, mail processes should have access to its socket.
- # For example: mode=0660, group=vmail and global mail_access_groups=vmail
- unix_listener dict {
- #mode = 0600
- #user =
- #group =
- }
-}
+++ /dev/null
-##
-## SSL settings
-##
-
-# SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt>
-ssl = yes
-
-# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
-# dropping root privileges, so keep the key file unreadable by anyone but
-# root. Included doc/mkcert.sh can be used to easily generate self-signed
-# certificate, just make sure to update the domains in dovecot-openssl.cnf
-ssl_cert = </etc/ssl/dovecot/server.pem
-ssl_key = </etc/ssl/dovecot/server.key
-
-# If key file is password protected, give the password here. Alternatively
-# give it when starting dovecot with -p parameter. Since this file is often
-# world-readable, you may want to place this setting instead to a different
-# root owned 0600 file by using ssl_key_password = <path.
-#ssl_key_password =
-
-# PEM encoded trusted certificate authority. Set this only if you intend to use
-# ssl_verify_client_cert=yes. The file should contain the CA certificate(s)
-# followed by the matching CRL(s). (e.g. ssl_ca = </etc/ssl/certs/ca.pem)
-#ssl_ca =
-
-# Request client to send a certificate. If you also want to require it, set
-# auth_ssl_require_client_cert=yes in auth section.
-#ssl_verify_client_cert = no
-
-# Which field from certificate to use for username. commonName and
-# x500UniqueIdentifier are the usual choices. You'll also need to set
-# auth_ssl_username_from_cert=yes.
-#ssl_cert_username_field = commonName
-
-# How often to regenerate the SSL parameters file. Generation is quite CPU
-# intensive operation. The value is in hours, 0 disables regeneration
-# entirely.
-#ssl_parameters_regenerate = 168
-
-# SSL ciphers to use
-#ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL
+++ /dev/null
-##
-## LDA specific settings (also used by LMTP)
-##
-
-# Address to use when sending rejection mails.
-# Default is postmaster@<your domain>.
-#postmaster_address =
-
-# Hostname to use in various parts of sent mails, eg. in Message-Id.
-# Default is the system's real hostname.
-#hostname =
-
-# If user is over quota, return with temporary failure instead of
-# bouncing the mail.
-#quota_full_tempfail = no
-
-# Binary to use for sending mails.
-#sendmail_path = /usr/sbin/sendmail
-
-# If non-empty, send mails via this SMTP host[:port] instead of sendmail.
-#submission_host =
-
-# Subject: header to use for rejection mails. You can use the same variables
-# as for rejection_reason below.
-#rejection_subject = Rejected: %s
-
-# Human readable error message for rejection mails. You can use variables:
-# %n = CRLF, %r = reason, %s = original subject, %t = recipient
-#rejection_reason = Your message to <%t> was automatically rejected:%n%r
-
-# Delimiter character between local-part and detail in email address.
-#recipient_delimiter = +
-
-# Header where the original recipient address (SMTP's RCPT TO: address) is taken
-# from if not available elsewhere. With dovecot-lda -a parameter overrides this.
-# A commonly used header for this is X-Original-To.
-#lda_original_recipient_header =
-
-# Should saving a mail to a nonexistent mailbox automatically create it?
-#lda_mailbox_autocreate = no
-
-# Should automatically created mailboxes be also automatically subscribed?
-#lda_mailbox_autosubscribe = no
-
-protocol lda {
- # Space separated list of plugins to load (default is global mail_plugins).
- #mail_plugins = $mail_plugins
-}
+++ /dev/null
-##
-## IMAP specific settings
-##
-
-protocol imap {
- # Maximum IMAP command line length. Some clients generate very long command
- # lines with huge mailboxes, so you may need to raise this if you get
- # "Too long argument" or "IMAP command line too large" errors often.
- #imap_max_line_length = 64k
-
- # Maximum number of IMAP connections allowed for a user from each IP address.
- # NOTE: The username is compared case-sensitively.
- #mail_max_userip_connections = 10
-
- # Space separated list of plugins to load (default is global mail_plugins).
- #mail_plugins = $mail_plugins
-
- # IMAP logout format string:
- # %i - total number of bytes read from client
- # %o - total number of bytes sent to client
- #imap_logout_format = bytes=%i/%o
-
- # Override the IMAP CAPABILITY response. If the value begins with '+',
- # add the given capabilities on top of the defaults (e.g. +XFOO XBAR).
- #imap_capability =
-
- # How long to wait between "OK Still here" notifications when client is
- # IDLEing.
- #imap_idle_notify_interval = 2 mins
-
- # ID field names and values to send to clients. Using * as the value makes
- # Dovecot use the default value. The following fields have default values
- # currently: name, version, os, os-version, support-url, support-email.
- #imap_id_send =
-
- # ID fields sent by client to log. * means everything.
- #imap_id_log =
-
- # Workarounds for various client bugs:
- # delay-newmail:
- # Send EXISTS/RECENT new mail notifications only when replying to NOOP
- # and CHECK commands. Some clients ignore them otherwise, for example OSX
- # Mail (<v2.1). Outlook Express breaks more badly though, without this it
- # may show user "Message no longer in server" errors. Note that OE6 still
- # breaks even with this workaround if synchronization is set to
- # "Headers Only".
- # tb-extra-mailbox-sep:
- # With mbox storage a mailbox can contain either mails or submailboxes,
- # but not both. Thunderbird separates these two by forcing server to
- # accept '/' suffix in mailbox names in subscriptions list.
- # tb-lsub-flags:
- # Show \Noselect flags for LSUB replies with LAYOUT=fs (e.g. mbox).
- # This makes Thunderbird realize they aren't selectable and show them
- # greyed out, instead of only later giving "not selectable" popup error.
- #
- # The list is space-separated.
- #imap_client_workarounds =
-}
+++ /dev/null
-##
-## LMTP specific settings
-##
-
-# Support proxying to other LMTP/SMTP servers by performing passdb lookups.
-#lmtp_proxy = no
-
-# When recipient address includes the detail (e.g. user+detail), try to save
-# the mail to the detail mailbox. See also recipient_delimiter and
-# lda_mailbox_autocreate settings.
-#lmtp_save_to_detail_mailbox = no
-
-protocol lmtp {
- # Space separated list of plugins to load (default is global mail_plugins).
- #mail_plugins = $mail_plugins
-}
+++ /dev/null
-##
-## POP3 specific settings
-##
-
-protocol pop3 {
- # Don't try to set mails non-recent or seen with POP3 sessions. This is
- # mostly intended to reduce disk I/O. With maildir it doesn't move files
- # from new/ to cur/, with mbox it doesn't write Status-header.
- #pop3_no_flag_updates = no
-
- # Support LAST command which exists in old POP3 specs, but has been removed
- # from new ones. Some clients still wish to use this though. Enabling this
- # makes RSET command clear all \Seen flags from messages.
- #pop3_enable_last = no
-
- # If mail has X-UIDL header, use it as the mail's UIDL.
- #pop3_reuse_xuidl = no
-
- # Keep the mailbox locked for the entire POP3 session.
- #pop3_lock_session = no
-
- # POP3 requires message sizes to be listed as if they had CR+LF linefeeds.
- # Many POP3 servers violate this by returning the sizes with LF linefeeds,
- # because it's faster to get. When this setting is enabled, Dovecot still
- # tries to do the right thing first, but if that requires opening the
- # message, it fallbacks to the easier (but incorrect) size.
- #pop3_fast_size_lookups = no
-
- # POP3 UIDL (unique mail identifier) format to use. You can use following
- # variables, along with the variable modifiers described in
- # doc/wiki/Variables.txt (e.g. %Uf for the filename in uppercase)
- #
- # %v - Mailbox's IMAP UIDVALIDITY
- # %u - Mail's IMAP UID
- # %m - MD5 sum of the mailbox headers in hex (mbox only)
- # %f - filename (maildir only)
- # %g - Mail's GUID
- #
- # If you want UIDL compatibility with other POP3 servers, use:
- # UW's ipop3d : %08Xv%08Xu
- # Courier : %f or %v-%u (both might be used simultaneosly)
- # Cyrus (<= 2.1.3) : %u
- # Cyrus (>= 2.1.4) : %v.%u
- # Dovecot v0.99.x : %v.%u
- # tpop3d : %Mf
- #
- # Note that Outlook 2003 seems to have problems with %v.%u format which was
- # Dovecot's default, so if you're building a new server it would be a good
- # idea to change this. %08Xu%08Xv should be pretty fail-safe.
- #
- #pop3_uidl_format = %08Xu%08Xv
-
- # Permanently save UIDLs sent to POP3 clients, so pop3_uidl_format changes
- # won't change those UIDLs. Currently this works only with Maildir.
- #pop3_save_uidl = no
-
- # POP3 logout format string:
- # %i - total number of bytes read from client
- # %o - total number of bytes sent to client
- # %t - number of TOP commands
- # %p - number of bytes sent to client as a result of TOP command
- # %r - number of RETR commands
- # %b - number of bytes sent to client as a result of RETR command
- # %d - number of deleted messages
- # %m - number of messages (before deletion)
- # %s - mailbox size in bytes (before deletion)
- # %u - old/new UIDL hash. may help finding out if UIDLs changed unexpectedly
- #pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s
-
- # Maximum number of POP3 connections allowed for a user from each IP address.
- # NOTE: The username is compared case-sensitively.
- #mail_max_userip_connections = 10
-
- # Space separated list of plugins to load (default is global mail_plugins).
- #mail_plugins = $mail_plugins
-
- # Workarounds for various client bugs:
- # outlook-no-nuls:
- # Outlook and Outlook Express hang if mails contain NUL characters.
- # This setting replaces them with 0x80 character.
- # oe-ns-eoh:
- # Outlook Express and Netscape Mail breaks if end of headers-line is
- # missing. This option simply sends it if it's missing.
- # The list is space-separated.
- #pop3_client_workarounds =
-}
+++ /dev/null
-##
-## Mailbox access control lists.
-##
-
-# vfile backend reads ACLs from "dovecot-acl" file from mail directory.
-# You can also optionally give a global ACL directory path where ACLs are
-# applied to all users' mailboxes. The global ACL directory contains
-# one file for each mailbox, eg. INBOX or sub.mailbox. cache_secs parameter
-# specifies how many seconds to wait between stat()ing dovecot-acl file
-# to see if it changed.
-plugin {
- #acl = vfile:/etc/dovecot/global-acls:cache_secs=300
-}
-
-# To let users LIST mailboxes shared by other users, Dovecot needs a
-# shared mailbox dictionary. For example:
-plugin {
- #acl_shared_dict = file:/var/lib/dovecot/shared-mailboxes
-}
+++ /dev/null
-##
-## Plugin settings
-##
-
-# All wanted plugins must be listed in mail_plugins setting before any of the
-# settings take effect. See <doc/wiki/Plugins.txt> for list of plugins and
-# their configuration. Note that %variable expansion is done for all values.
-
-plugin {
- #setting_name = value
-}
+++ /dev/null
-##
-## Quota configuration.
-##
-
-# Note that you also have to enable quota plugin in mail_plugins setting.
-# <doc/wiki/Quota.txt>
-
-##
-## Quota limits
-##
-
-# Quota limits are set using "quota_rule" parameters. To get per-user quota
-# limits, you can set/override them by returning "quota_rule" extra field
-# from userdb. It's also possible to give mailbox-specific limits, for example
-# to give additional 100 MB when saving to Trash:
-
-plugin {
- #quota_rule = *:storage=1G
- #quota_rule2 = Trash:storage=+100M
-}
-
-##
-## Quota warnings
-##
-
-# You can execute a given command when user exceeds a specified quota limit.
-# Each quota root has separate limits. Only the command for the first
-# exceeded limit is excecuted, so put the highest limit first.
-# The commands are executed via script service by connecting to the named
-# UNIX socket (quota-warning below).
-# Note that % needs to be escaped as %%, otherwise "% " expands to empty.
-
-plugin {
- #quota_warning = storage=95%% quota-warning 95 %u
- #quota_warning2 = storage=80%% quota-warning 80 %u
-}
-
-# Example quota-warning service. The unix listener's permissions should be
-# set in a way that mail processes can connect to it. Below example assumes
-# that mail processes run as vmail user. If you use mode=0666, all system users
-# can generate quota warnings to anyone.
-#service quota-warning {
-# executable = script /usr/local/bin/quota-warning.sh
-# user = dovecot
-# unix_listener quota-warning {
-# user = vmail
-# }
-#}
-
-##
-## Quota backends
-##
-
-# Multiple backends are supported:
-# dirsize: Find and sum all the files found from mail directory.
-# Extremely SLOW with Maildir. It'll eat your CPU and disk I/O.
-# dict: Keep quota stored in dictionary (eg. SQL)
-# maildir: Maildir++ quota
-# fs: Read-only support for filesystem quota
-
-plugin {
- #quota = dirsize:User quota
- #quota = maildir:User quota
- #quota = dict:User quota::proxy::quota
- #quota = fs:User quota
-}
-
-# Multiple quota roots are also possible, for example this gives each user
-# their own 100MB quota and one shared 1GB quota within the domain:
-plugin {
- #quota = dict:user::proxy::quota
- #quota2 = dict:domain:%d:proxy::quota_domain
- #quota_rule = *:storage=102400
- #quota2_rule = *:storage=1048576
-}
+++ /dev/null
-# Authentication for checkpassword users. Included from auth.conf.
-#
-# <doc/wiki/AuthDatabase.CheckPassword.txt>
-
-passdb {
- driver = checkpassword
- args = /usr/bin/checkpassword
-}
-
-# passdb lookup should return also userdb info
-userdb {
- driver = prefetch
-}
-
-# Standard checkpassword doesn't support direct userdb lookups.
-# If you need checkpassword userdb, the checkpassword must support
-# Dovecot-specific extensions.
-#userdb {
-# driver = checkpassword
-# args = /usr/bin/checkpassword
-#}
+++ /dev/null
-# Deny access for users. Included from auth.conf.
-
-# Users can be (temporarily) disabled by adding a passdb with deny=yes.
-# If the user is found from that database, authentication will fail.
-# The deny passdb should always be specified before others, so it gets
-# checked first.
-
-# Example deny passdb using passwd-file. You can use any passdb though.
-passdb {
- driver = passwd-file
- deny = yes
-
- # File contains a list of usernames, one per line
- args = /etc/dovecot/deny-users
-}
+++ /dev/null
-# Authentication for LDAP users. Included from auth.conf.
-#
-# <doc/wiki/AuthDatabase.LDAP.txt>
-
-passdb {
- driver = ldap
-
- # Path for LDAP configuration file, see example-config/dovecot-ldap.conf.ext
- args = /etc/dovecot/dovecot-ldap.conf.ext
-}
-
-# "prefetch" user database means that the passdb already provided the
-# needed information and there's no need to do a separate userdb lookup.
-# <doc/wiki/UserDatabase.Prefetch.txt>
-#userdb {
-# driver = prefetch
-#}
-
-userdb {
- driver = ldap
- args = /etc/dovecot/dovecot-ldap.conf.ext
-}
-
-# If you don't have any user-specific settings, you can avoid the userdb LDAP
-# lookup by using userdb static instead of userdb ldap, for example:
-# <doc/wiki/UserDatabase.Static.txt>
-#userdb {
- #driver = static
- #args = uid=vmail gid=vmail home=/var/vmail/%u
-#}
+++ /dev/null
-# Authentication for master users. Included from auth.conf.
-
-# By adding master=yes setting inside a passdb you make the passdb a list
-# of "master users", who can log in as anyone else.
-# <doc/wiki/Authentication.MasterUsers.txt>
-
-# Example master user passdb using passwd-file. You can use any passdb though.
-passdb {
- driver = passwd-file
- master = yes
- args = /etc/dovecot/master-users
-
- # Unless you're using PAM, you probably still want the destination user to
- # be looked up from passdb that it really exists. pass=yes does that.
- pass = yes
-}
+++ /dev/null
-# Authentication for passwd-file users. Included from auth.conf.
-#
-# passwd-like file with specified location.
-# <doc/wiki/AuthDatabase.PasswdFile.txt>
-
-passdb {
- driver = passwd-file
- args = scheme=CRYPT username_format=%u /etc/dovecot/users
-}
-
-userdb {
- driver = passwd-file
- args = username_format=%u /etc/dovecot/users
-}
+++ /dev/null
-# Authentication for SQL users. Included from auth.conf.
-#
-# <doc/wiki/AuthDatabase.SQL.txt>
-
-passdb {
- driver = sql
-
- # Path for SQL configuration file, see example-config/dovecot-sql.conf.ext
- args = /etc/dovecot/dovecot-sql.conf.ext
-}
-
-# "prefetch" user database means that the passdb already provided the
-# needed information and there's no need to do a separate userdb lookup.
-# <doc/wiki/UserDatabase.Prefetch.txt>
-#userdb {
-# driver = prefetch
-#}
-
-userdb {
- driver = sql
- args = /etc/dovecot/dovecot-sql.conf.ext
-}
-
-# If you don't have any user-specific settings, you can avoid the user_query
-# by using userdb static instead of userdb sql, for example:
-# <doc/wiki/UserDatabase.Static.txt>
-#userdb {
- #driver = static
- #args = uid=vmail gid=vmail home=/var/vmail/%u
-#}
+++ /dev/null
-# Static passdb. Included from auth.conf.
-
-# This can be used for situations where Dovecot doesn't need to verify the
-# username or the password, or if there is a single password for all users:
-#
-# - proxy frontend, where the backend verifies the password
-# - proxy backend, where the frontend already verified the password
-# - authentication with SSL certificates
-# - simple testing
-
-#passdb {
-# driver = static
-# args = proxy=y host=%1Mu.example.com nopassword=y
-#}
-
-#passdb {
-# driver = static
-# args = password=test
-#}
-
-#userdb {
-# driver = static
-# args = uid=vmail gid=vmail home=/home/%u
-#}
+++ /dev/null
-# Authentication for system users. Included from auth.conf.
-#
-# <doc/wiki/PasswordDatabase.txt>
-# <doc/wiki/UserDatabase.txt>
-
-# PAM authentication. Preferred nowadays by most systems.
-# PAM is typically used with either userdb passwd or userdb static.
-# REMEMBER: You'll need /etc/pam.d/dovecot file created for PAM
-# authentication to actually work. <doc/wiki/PasswordDatabase.PAM.txt>
-passdb {
- driver = pam
- # [session=yes] [setcred=yes] [failure_show_msg=yes] [max_requests=<n>]
- # [cache_key=<key>] [<service name>]
- args = "*"
-}
-
-# System users (NSS, /etc/passwd, or similiar).
-# In many systems nowadays this uses Name Service Switch, which is
-# configured in /etc/nsswitch.conf. <doc/wiki/AuthDatabase.Passwd.txt>
-#passdb {
- #driver = passwd
- # [blocking=no]
- #args =
-#}
-
-# Shadow passwords for system users (NSS, /etc/shadow or similiar).
-# Deprecated by PAM nowadays.
-# <doc/wiki/PasswordDatabase.Shadow.txt>
-#passdb {
- #driver = shadow
- # [blocking=no]
- #args =
-#}
-
-# PAM-like authentication for OpenBSD.
-# <doc/wiki/PasswordDatabase.BSDAuth.txt>
-#passdb {
- #driver = bsdauth
- # [blocking=no] [cache_key=<key>]
- #args =
-#}
-
-##
-## User databases
-##
-
-# System users (NSS, /etc/passwd, or similiar). In many systems nowadays this
-# uses Name Service Switch, which is configured in /etc/nsswitch.conf.
-userdb {
- # <doc/wiki/AuthDatabase.Passwd.txt>
- driver = passwd
- # [blocking=no]
- #args =
-}
-
-# Static settings generated from template <doc/wiki/UserDatabase.Static.txt>
-#userdb {
- #driver = static
- # Can return anything a userdb could normally return. For example:
- #
- # args = uid=500 gid=500 home=/var/mail/%u
- #
- # LDA and LMTP needs to look up users only from the userdb. This of course
- # doesn't work with static userdb because there is no list of users.
- # Normally static userdb handles this by doing a passdb lookup. This works
- # with most passdbs, with PAM being the most notable exception. If you do
- # the user verification another way, you can add allow_all_users=yes to
- # the args in which case the passdb lookup is skipped.
- #
- #args =
-#}
+++ /dev/null
-# Authentication for vpopmail users. Included from auth.conf.
-#
-# <doc/wiki/AuthDatabase.VPopMail.txt>
-
-passdb {
- driver = vpopmail
-
- # [cache_key=<key>] [webmail=<ip>]
- args =
-}
-
-userdb {
- driver = vpopmail
-
- # [quota_template=<template>] - %q expands to Maildir++ quota
- args = quota_template=quota_rule=*:backend=%q
-}
+++ /dev/null
-# Example DB_CONFIG for Berkeley DB. Typically dict_db_config setting is used
-# to point to this file.
-# http://www.oracle.com/technology/documentation/berkeley-db/db/ref/env/db_config.html
-
-# Maximum number of simultaneous transactions.
-set_tx_max 1000
-
-# http://www.oracle.com/technology/documentation/berkeley-db/db/ref/lock/max.html
-#set_lk_max_locks 1000
-#set_lk_max_lockers 1000
-#set_lk_max_objects 1000
+++ /dev/null
-#connect = host=localhost dbname=mails user=testuser password=pass
-
-# CREATE TABLE quota (
-# username varchar(100) not null,
-# bytes bigint not null default 0,
-# messages integer not null default 0,
-# primary key (username)
-# );
-
-map {
- pattern = priv/quota/storage
- table = quota
- username_field = username
- value_field = bytes
-}
-map {
- pattern = priv/quota/messages
- table = quota
- username_field = username
- value_field = messages
-}
-
-# CREATE TABLE expires (
-# username varchar(100) not null,
-# mailbox varchar(255) not null,
-# expire_stamp integer not null,
-# primary key (username, mailbox)
-# );
-
-map {
- pattern = shared/expire/$user/$mailbox
- table = expires
- value_field = expire_stamp
-
- fields {
- username = $user
- mailbox = $mailbox
- }
-}
+++ /dev/null
-# This file is opened as root, so it should be owned by root and mode 0600.
-#
-# http://wiki2.dovecot.org/AuthDatabase/LDAP
-#
-# NOTE: If you're not using authentication binds, you'll need to give
-# dovecot-auth read access to userPassword field in the LDAP server.
-# With OpenLDAP this is done by modifying /etc/ldap/slapd.conf. There should
-# already be something like this:
-
-# access to attribute=userPassword
-# by dn="<dovecot's dn>" read # add this
-# by anonymous auth
-# by self write
-# by * none
-
-# Space separated list of LDAP hosts to use. host:port is allowed too.
-#hosts =
-
-# LDAP URIs to use. You can use this instead of hosts list. Note that this
-# setting isn't supported by all LDAP libraries.
-#uris =
-
-# Distinguished Name - the username used to login to the LDAP server.
-# Leave it commented out to bind anonymously (useful with auth_bind=yes).
-#dn =
-
-# Password for LDAP server, if dn is specified.
-#dnpass =
-
-# Use SASL binding instead of the simple binding. Note that this changes
-# ldap_version automatically to be 3 if it's lower. Also note that SASL binds
-# and auth_bind=yes don't work together.
-#sasl_bind = no
-# SASL mechanism name to use.
-#sasl_mech =
-# SASL realm to use.
-#sasl_realm =
-# SASL authorization ID, ie. the dnpass is for this "master user", but the
-# dn is still the logged in user. Normally you want to keep this empty.
-#sasl_authz_id =
-
-# Use TLS to connect to the LDAP server.
-#tls = no
-# TLS options, currently supported only with OpenLDAP:
-#tls_ca_cert_file =
-#tls_ca_cert_dir =
-#tls_cipher_suite =
-# TLS cert/key is used only if LDAP server requires a client certificate.
-#tls_cert_file =
-#tls_key_file =
-# Valid values: never, hard, demand, allow, try
-#tls_require_cert =
-
-# Use the given ldaprc path.
-#ldaprc_path =
-
-# LDAP library debug level as specified by LDAP_DEBUG_* in ldap_log.h.
-# -1 = everything. You may need to recompile OpenLDAP with debugging enabled
-# to get enough output.
-#debug_level = 0
-
-# Use authentication binding for verifying password's validity. This works by
-# logging into LDAP server using the username and password given by client.
-# The pass_filter is used to find the DN for the user. Note that the pass_attrs
-# is still used, only the password field is ignored in it. Before doing any
-# search, the binding is switched back to the default DN.
-#auth_bind = no
-
-# If authentication binding is used, you can save one LDAP request per login
-# if users' DN can be specified with a common template. The template can use
-# the standard %variables (see user_filter). Note that you can't
-# use any pass_attrs if you use this setting.
-#
-# If you use this setting, it's a good idea to use a different
-# dovecot-ldap.conf.ext for userdb (it can even be a symlink, just as long as
-# the filename is different in userdb's args). That way one connection is used
-# only for LDAP binds and another connection is used for user lookups.
-# Otherwise the binding is changed to the default DN before each user lookup.
-#
-# For example:
-# auth_bind_userdn = cn=%u,ou=people,o=org
-#
-#auth_bind_userdn =
-
-# LDAP protocol version to use. Likely 2 or 3.
-#ldap_version = 3
-
-# LDAP base. %variables can be used here.
-# For example: dc=mail, dc=example, dc=org
-base =
-
-# Dereference: never, searching, finding, always
-#deref = never
-
-# Search scope: base, onelevel, subtree
-#scope = subtree
-
-# User attributes are given in LDAP-name=dovecot-internal-name list. The
-# internal names are:
-# uid - System UID
-# gid - System GID
-# home - Home directory
-# mail - Mail location
-#
-# There are also other special fields which can be returned, see
-# http://wiki2.dovecot.org/UserDatabase/ExtraFields
-#user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid
-
-# Filter for user lookup. Some variables can be used (see
-# http://wiki2.dovecot.org/Variables for full list):
-# %u - username
-# %n - user part in user@domain, same as %u if there's no domain
-# %d - domain part in user@domain, empty if user there's no domain
-#user_filter = (&(objectClass=posixAccount)(uid=%u))
-
-# Password checking attributes:
-# user: Virtual user name (user@domain), if you wish to change the
-# user-given username to something else
-# password: Password, may optionally start with {type}, eg. {crypt}
-# There are also other special fields which can be returned, see
-# http://wiki2.dovecot.org/PasswordDatabase/ExtraFields
-#pass_attrs = uid=user,userPassword=password
-
-# If you wish to avoid two LDAP lookups (passdb + userdb), you can use
-# userdb prefetch instead of userdb ldap in dovecot.conf. In that case you'll
-# also have to include user_attrs in pass_attrs field prefixed with "userdb_"
-# string. For example:
-#pass_attrs = uid=user,userPassword=password,\
-# homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid
-
-# Filter for password lookups
-#pass_filter = (&(objectClass=posixAccount)(uid=%u))
-
-# Attributes and filter to get a list of all users
-#iterate_attrs = uid=user
-#iterate_filter = (objectClass=posixAccount)
-
-# Default password scheme. "{scheme}" before password overrides this.
-# List of supported schemes is in: http://wiki2.dovecot.org/Authentication
-#default_pass_scheme = CRYPT
+++ /dev/null
-# This file is opened as root, so it should be owned by root and mode 0600.
-#
-# http://wiki2.dovecot.org/AuthDatabase/SQL
-#
-# For the sql passdb module, you'll need a database with a table that
-# contains fields for at least the username and password. If you want to
-# use the user@domain syntax, you might want to have a separate domain
-# field as well.
-#
-# If your users all have the same uig/gid, and have predictable home
-# directories, you can use the static userdb module to generate the home
-# dir based on the username and domain. In this case, you won't need fields
-# for home, uid, or gid in the database.
-#
-# If you prefer to use the sql userdb module, you'll want to add fields
-# for home, uid, and gid. Here is an example table:
-#
-# CREATE TABLE users (
-# username VARCHAR(128) NOT NULL,
-# domain VARCHAR(128) NOT NULL,
-# password VARCHAR(64) NOT NULL,
-# home VARCHAR(255) NOT NULL,
-# uid INTEGER NOT NULL,
-# gid INTEGER NOT NULL,
-# active CHAR(1) DEFAULT 'Y' NOT NULL
-# );
-
-# Database driver: mysql, pgsql, sqlite
-#driver =
-
-# Database connection string. This is driver-specific setting.
-#
-# HA / round-robin load-balancing is supported by giving multiple host
-# settings, like: host=sql1.host.org host=sql2.host.org
-#
-# pgsql:
-# For available options, see the PostgreSQL documention for the
-# PQconnectdb function of libpq.
-# Use maxconns=n (default 5) to change how many connections Dovecot can
-# create to pgsql.
-#
-# mysql:
-# Basic options emulate PostgreSQL option names:
-# host, port, user, password, dbname
-#
-# But also adds some new settings:
-# client_flags - See MySQL manual
-# ssl_ca, ssl_ca_path - Set either one or both to enable SSL
-# ssl_cert, ssl_key - For sending client-side certificates to server
-# ssl_cipher - Set minimum allowed cipher security (default: HIGH)
-# option_file - Read options from the given file instead of
-# the default my.cnf location
-# option_group - Read options from the given group (default: client)
-#
-# You can connect to UNIX sockets by using host: host=/var/run/mysql.sock
-# Note that currently you can't use spaces in parameters.
-#
-# sqlite:
-# The path to the database file.
-#
-# Examples:
-# connect = host=192.168.1.1 dbname=users
-# connect = host=sql.example.com dbname=virtual user=virtual password=blarg
-# connect = /etc/dovecot/authdb.sqlite
-#
-#connect =
-
-# Default password scheme.
-#
-# List of supported schemes is in
-# http://wiki2.dovecot.org/Authentication/PasswordSchemes
-#
-#default_pass_scheme = MD5
-
-# passdb query to retrieve the password. It can return fields:
-# password - The user's password. This field must be returned.
-# user - user@domain from the database. Needed with case-insensitive lookups.
-# username and domain - An alternative way to represent the "user" field.
-#
-# The "user" field is often necessary with case-insensitive lookups to avoid
-# e.g. "name" and "nAme" logins creating two different mail directories. If
-# your user and domain names are in separate fields, you can return "username"
-# and "domain" fields instead of "user".
-#
-# The query can also return other fields which have a special meaning, see
-# http://wiki2.dovecot.org/PasswordDatabase/ExtraFields
-#
-# Commonly used available substitutions (see http://wiki2.dovecot.org/Variables
-# for full list):
-# %u = entire user@domain
-# %n = user part of user@domain
-# %d = domain part of user@domain
-#
-# Note that these can be used only as input to SQL query. If the query outputs
-# any of these substitutions, they're not touched. Otherwise it would be
-# difficult to have eg. usernames containing '%' characters.
-#
-# Example:
-# password_query = SELECT userid AS user, pw AS password \
-# FROM users WHERE userid = '%u' AND active = 'Y'
-#
-#password_query = \
-# SELECT username, domain, password \
-# FROM users WHERE username = '%n' AND domain = '%d'
-
-# userdb query to retrieve the user information. It can return fields:
-# uid - System UID (overrides mail_uid setting)
-# gid - System GID (overrides mail_gid setting)
-# home - Home directory
-# mail - Mail location (overrides mail_location setting)
-#
-# None of these are strictly required. If you use a single UID and GID, and
-# home or mail directory fits to a template string, you could use userdb static
-# instead. For a list of all fields that can be returned, see
-# http://wiki2.dovecot.org/UserDatabase/ExtraFields
-#
-# Examples:
-# user_query = SELECT home, uid, gid FROM users WHERE userid = '%u'
-# user_query = SELECT dir AS home, user AS uid, group AS gid FROM users where userid = '%u'
-# user_query = SELECT home, 501 AS uid, 501 AS gid FROM users WHERE userid = '%u'
-#
-#user_query = \
-# SELECT home, uid, gid \
-# FROM users WHERE username = '%n' AND domain = '%d'
-
-# If you wish to avoid two SQL lookups (passdb + userdb), you can use
-# userdb prefetch instead of userdb sql in dovecot.conf. In that case you'll
-# also have to return userdb fields in password_query prefixed with "userdb_"
-# string. For example:
-#password_query = \
-# SELECT userid AS user, password, \
-# home AS userdb_home, uid AS userdb_uid, gid AS userdb_gid \
-# FROM users WHERE userid = '%u'
-
-# Query to get a list of all usernames.
-#iterate_query = SELECT username AS user FROM users
+++ /dev/null
-## Dovecot configuration file
-
-# If you're in a hurry, see http://wiki2.dovecot.org/QuickConfiguration
-
-# "doveconf -n" command gives a clean output of the changed settings. Use it
-# instead of copy&pasting files when posting to the Dovecot mailing list.
-
-# '#' character and everything after it is treated as comments. Extra spaces
-# and tabs are ignored. If you want to use either of these explicitly, put the
-# value inside quotes, eg.: key = "# char and trailing whitespace "
-
-# Default values are shown for each setting, it's not required to uncomment
-# those. These are exceptions to this though: No sections (e.g. namespace {})
-# or plugin settings are added by default, they're listed only as examples.
-# Paths are also just examples with the real defaults being based on configure
-# options. The paths listed here are for configure --prefix=/usr
-# --sysconfdir=/etc --localstatedir=/var
-
-# Protocols we want to be serving.
-#protocols = imap pop3 lmtp
-
-# A comma separated list of IPs or hosts where to listen in for connections.
-# "*" listens in all IPv4 interfaces, "::" listens in all IPv6 interfaces.
-# If you want to specify non-default ports or anything more complex,
-# edit conf.d/master.conf.
-#listen = *, ::
-
-# Base directory where to store runtime data.
-#base_dir = /var/run/dovecot/
-
-# Greeting message for clients.
-#login_greeting = Dovecot ready.
-
-# Space separated list of trusted network ranges. Connections from these
-# IPs are allowed to override their IP addresses and ports (for logging and
-# for authentication checks). disable_plaintext_auth is also ignored for
-# these networks. Typically you'd specify your IMAP proxy servers here.
-#login_trusted_networks =
-
-# Sepace separated list of login access check sockets (e.g. tcpwrap)
-#login_access_sockets =
-
-# Show more verbose process titles (in ps). Currently shows user name and
-# IP address. Useful for seeing who are actually using the IMAP processes
-# (eg. shared mailboxes or if same uid is used for multiple accounts).
-#verbose_proctitle = no
-
-# Should all processes be killed when Dovecot master process shuts down.
-# Setting this to "no" means that Dovecot can be upgraded without
-# forcing existing client connections to close (although that could also be
-# a problem if the upgrade is e.g. because of a security fix).
-#shutdown_clients = yes
-
-# If non-zero, run mail commands via this many connections to doveadm server,
-# instead of running them directly in the same process.
-#doveadm_worker_count = 0
-# UNIX socket or host:port used for connecting to doveadm server
-#doveadm_socket_path = doveadm-server
-
-# Space separated list of environment variables that are preserved on Dovecot
-# startup and passed down to all of its child processes. You can also give
-# key=value pairs to always set specific settings.
-#import_environment = TZ
-
-##
-## Dictionary server settings
-##
-
-# Dictionary can be used to store key=value lists. This is used by several
-# plugins. The dictionary can be accessed either directly or though a
-# dictionary server. The following dict block maps dictionary names to URIs
-# when the server is used. These can then be referenced using URIs in format
-# "proxy::<name>".
-
-dict {
- #quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext
- #expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext
-}
-
-# Most of the actual configuration gets included below. The filenames are
-# first sorted by their ASCII value and parsed in that order. The 00-prefixes
-# in filenames are intended to make it easier to understand the ordering.
-!include conf.d/*.conf
-
-# A config file can also tried to be included without giving an error if
-# it's not found:
-!include_try local.conf
+++ /dev/null
-#!/sbin/runscript
-# Copyright 1999-2011 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License, v2 or later
-# $Header: /var/cvsroot/gentoo-x86/net-mail/dovecot/files/dovecot.init-r3,v 1.1 2011/09/17 10:33:38 eras Exp $
-
-extra_started_commands="reload"
-
-depend() {
- need localmount net
- before postfix
- after bootmisc ldap mysql ntp-client ntpd postgresql saslauthd slapd
- use logger
-}
-
-checkconfig() {
- DOVECOT_INSTANCE=${SVCNAME##*.}
- if [ -n "${DOVECOT_INSTANCE}" -a "${SVCNAME}" != "dovecot" ]; then
- DOVECOT_CONF=/etc/dovecot/dovecot.${DOVECOT_INSTANCE}.conf
- else
- DOVECOT_CONF=/etc/dovecot/dovecot.conf
- fi
- if [ ! -e ${DOVECOT_CONF} ]; then
- eerror "You will need an ${DOVECOT_CONF} first"
- return 1
- fi
- if [ -x /usr/sbin/dovecot ]; then
- DOVECOT_BASEDIR=$(/usr/sbin/dovecot -c ${DOVECOT_CONF} -a | grep '^base_dir = ' | sed 's/^base_dir = //')
- else
- eerror "dovecot not executable"
- return 1
- fi
- DOVECOT_BASEDIR=${DOVECOT_BASEDIR:-/var/run/dovecot}
- DOVECOT_PIDFILE=${DOVECOT_BASEDIR}/master.pid
-}
-
-start() {
- checkconfig || return 1
- ebegin "Starting ${SVCNAME}"
- start-stop-daemon --start --exec /usr/sbin/dovecot \
- --pidfile "${DOVECOT_PIDFILE}" -- -c "${DOVECOT_CONF}"
- eend $?
-}
-
-stop() {
- checkconfig || return 1
- ebegin "Stopping ${SVCNAME}"
- start-stop-daemon --stop --exec /usr/sbin/dovecot \
- --pidfile "${DOVECOT_PIDFILE}"
- eend $?
-}
-
-reload() {
- checkconfig || return 1
- ebegin "Reloading ${SVCNAME} configs and restarting auth/login processes"
- start-stop-daemon --signal HUP --exec /usr/sbin/dovecot \
- --pidfile "${DOVECOT_PIDFILE}"
- eend $?
-}
projects / config / bruni / etc.git / commitdiff