maybe chmod 0640 './audit/audit.rules.stop.post'
maybe chmod 0640 './audit/audit.rules.stop.pre'
maybe chmod 0640 './audit/auditd.conf'
+maybe chmod 0644 './auto.master'
+maybe chmod 0644 './auto.misc'
+maybe chmod 0755 './auto.net'
+maybe chmod 0755 './auto.smb'
+maybe chmod 0755 './autofs'
+maybe chmod 0644 './autofs/auto.master'
+maybe chmod 0600 './autofs_ldap_auth.conf'
maybe chmod 0755 './bash'
maybe chmod 0644 './bash/bash_logout'
maybe chmod 0644 './bash/bashrc'
maybe chmod 0755 './conf.d'
maybe chmod 0644 './conf.d/apache2'
maybe chmod 0644 './conf.d/auditd'
+maybe chmod 0644 './conf.d/autofs'
maybe chmod 0644 './conf.d/bootmisc'
maybe chmod 0644 './conf.d/clamd'
maybe chmod 0644 './conf.d/consolefont'
maybe chmod 0755 './init.d/apache2'
maybe chmod 0755 './init.d/atd'
maybe chmod 0755 './init.d/auditd'
+maybe chmod 0755 './init.d/autofs'
maybe chmod 0755 './init.d/bootmisc'
maybe chmod 0755 './init.d/clamd'
maybe chmod 0755 './init.d/consolefont'
--- /dev/null
+#
+# Sample auto.master file
+# This is an automounter map and it has the following format
+# key [ -mount-options-separated-by-comma ] location
+# For details of the format look at autofs(5).
+#
+/misc /etc/auto.misc
+#
+# NOTE: mounts done from a hosts map will be mounted with the
+# "nosuid" and "nodev" options unless the "suid" and "dev"
+# options are explicitly given.
+#
+/net -hosts
+#
+# Include central master map if it can be found using
+# nsswitch sources.
+#
+# Note that if there are entries for /net or /misc (as
+# above) in the included master map any keys that are the
+# same will not be seen as the first read key seen takes
+# precedence.
+#
++auto.master
--- /dev/null
+#
+# This is an automounter map and it has the following format
+# key [ -mount-options-separated-by-comma ] location
+# Details may be found in the autofs(5) manpage
+
+cd -fstype=iso9660,ro,nosuid,nodev :/dev/cdrom
+
+# the following entries are samples to pique your imagination
+#linux -ro,soft,intr ftp.example.org:/pub/linux
+#boot -fstype=ext2 :/dev/hda1
+#floppy -fstype=auto :/dev/fd0
+#floppy -fstype=ext2 :/dev/fd0
+#e2floppy -fstype=ext2 :/dev/fd0
+#jaz -fstype=ext2 :/dev/sdc1
+#removable -fstype=ext2 :/dev/hdd
--- /dev/null
+#!/bin/bash
+
+# This file must be executable to work! chmod 755!
+
+# Look at what a host is exporting to determine what we can mount.
+# This is very simple, but it appears to work surprisingly well
+
+key="$1"
+
+# add "nosymlink" here if you want to suppress symlinking local filesystems
+# add "nonstrict" to make it OK for some filesystems to not mount
+opts="-fstype=nfs,hard,intr,nodev,nosuid"
+
+# Showmount comes in a number of names and varieties. "showmount" is
+# typically an older version which accepts the '--no-headers' flag
+# but ignores it. "kshowmount" is the newer version installed with knfsd,
+# which both accepts and acts on the '--no-headers' flag.
+#SHOWMOUNT="kshowmount --no-headers -e $key"
+#SHOWMOUNT="showmount -e $key | tail -n +2"
+
+for P in /bin /sbin /usr/bin /usr/sbin
+do
+ for M in showmount kshowmount
+ do
+ if [ -x $P/$M ]
+ then
+ SMNT=$P/$M
+ break
+ fi
+ done
+done
+
+[ -x $SMNT ] || exit 1
+
+# Newer distributions get this right
+SHOWMOUNT="$SMNT --no-headers -e $key"
+
+$SHOWMOUNT | LC_ALL=C sort -k 1 | \
+ awk -v key="$key" -v opts="$opts" -- '
+ BEGIN { ORS=""; first=1 }
+ { if (first) { print opts; first=0 }; print " \\\n\t" $1, key ":" $1 }
+ END { if (!first) print "\n"; else exit 1 }
+ ' | sed 's/#/\\#/g'
--- /dev/null
+#!/bin/bash
+
+# This file must be executable to work! chmod 755!
+
+key="$1"
+opts="-fstype=cifs"
+
+for P in /bin /sbin /usr/bin /usr/sbin
+do
+ if [ -x $P/smbclient ]
+ then
+ SMBCLIENT=$P/smbclient
+ break
+ fi
+done
+
+[ -x $SMBCLIENT ] || exit 1
+
+$SMBCLIENT -gNL $key 2>/dev/null| awk -v key="$key" -v opts="$opts" -F'|' -- '
+ BEGIN { ORS=""; first=1 }
+ /Disk/ {
+ if (first)
+ print opts; first=0
+ dir = $2
+ loc = $2
+ # Enclose mount dir and location in quotes
+ # Double quote "$" in location as it is special
+ gsub(/\$$/, "\\$", loc);
+ gsub(/\&/,"\\\\&",loc)
+ print " \\\n\t \"/" dir "\"", "\"://" key "/" loc "\""
+ }
+ END { if (!first) print "\n"; else exit 1 }
+ '
+
--- /dev/null
+# $Id: autofs5-auto.master,v 1.1 2011/05/23 08:29:05 pva Exp $
+# Sample auto.master file
+# This is an automounter map and it has the following format
+# key [ -mount-options-separated-by-comma ] location
+# For details of the format look at autofs(5).
+#
+#/misc /etc/autofs/auto.misc
+#/net /etc/autofs/auto.net
+#
+# NOTE: mounts done from a hosts map will be mounted with the
+# "nosuid" and "nodev" options unless the "suid" and "dev"
+# options are explicitly given.
+#
+#/net -hosts
+#
+# Include central master map if it can be found using
+# nsswitch sources.
+#
+# Note that if there are entries for /net or /misc (as
+# above) in the included master map any keys that are the
+# same will not be seen as the first read key seen takes
+# precedence.
+#
+#+auto.master
--- /dev/null
+<?xml version="1.0" ?>
+<!--
+This files contains a single entry with multiple attributes tied to it.
+See autofs_ldap_auth.conf(5) for more information.
+-->
+
+<autofs_ldap_sasl_conf
+ usetls="no"
+ tlsrequired="no"
+ authrequired="no"
+/>
--- /dev/null
+#
+# Define default options for autofs.
+#
+# MASTER_MAP_NAME - default map name for the master map.
+#
+#MASTER_MAP_NAME="auto.master"
+#
+# TIMEOUT - set the default mount timeout (default 600).
+#
+TIMEOUT=300
+#
+# NEGATIVE_TIMEOUT - set the default negative timeout for
+# failed mount attempts (default 60).
+#
+#NEGATIVE_TIMEOUT=60
+#
+# MOUNT_WAIT - time to wait for a response from umount(8).
+# Setting this timeout can cause problems when
+# mount would otherwise wait for a server that
+# is temporarily unavailable, such as when it's
+# restarting. The defailt of waiting for mount(8)
+# usually results in a wait of around 3 minutes.
+#
+#MOUNT_WAIT=-1
+#
+# UMOUNT_WAIT - time to wait for a response from umount(8).
+#
+#UMOUNT_WAIT=12
+#
+# BROWSE_MODE - maps are browsable by default.
+#
+BROWSE_MODE="no"
+#
+# MOUNT_NFS_DEFAULT_PROTOCOL - specify the default protocol used by
+# mount.nfs(8). Since we can't identify
+# the default automatically we need to
+# set it in our configuration. This will
+# only make a difference for replicated
+# map entries as availability probing isn't
+# used for single host map entries.
+#
+#MOUNT_NFS_DEFAULT_PROTOCOL=3
+#
+# APPEND_OPTIONS - append to global options instead of replace.
+#
+#APPEND_OPTIONS="yes"
+#
+# LOGGING - set default log level "none", "verbose" or "debug"
+#
+#LOGGING="none"
+#
+# Define server URIs
+#
+# LDAP_URI - space seperated list of server uris of the form
+# <proto>://<server>[/] where <proto> can be ldap
+# or ldaps. The option can be given multiple times.
+# Map entries that include a server name override
+# this option.
+#
+# This configuration option can also be used to
+# request autofs lookup SRV RRs for a domain of
+# the form <proto>:///[<domain dn>]. Note that a
+# trailing "/" is not allowed when using this form.
+# If the domain dn is not specified the dns domain
+# name (if any) is used to construct the domain dn
+# for the SRV RR lookup. The server list returned
+# from an SRV RR lookup is refreshed according to
+# the minimum ttl found in the SRV RR records or
+# after one hour, whichever is less.
+#
+#LDAP_URI=""
+#
+# LDAP__TIMEOUT - timeout value for the synchronous API calls
+# (default is LDAP library default).
+#
+#LDAP_TIMEOUT=-1
+#
+# LDAP_NETWORK_TIMEOUT - set the network response timeout (default 8).
+#
+#LDAP_NETWORK_TIMEOUT=8
+#
+# Define base dn for map dn lookup.
+#
+# SEARCH_BASE - base dn to use for searching for map search dn.
+# Multiple entries can be given and they are checked
+# in the order they occur here.
+#
+#SEARCH_BASE=""
+#
+# Define the LDAP schema to used for lookups
+#
+# If no schema is set autofs will check each of the schemas
+# below in the order given to try and locate an appropriate
+# basdn for lookups. If you want to minimize the number of
+# queries to the server set the values here.
+#
+#MAP_OBJECT_CLASS="nisMap"
+#ENTRY_OBJECT_CLASS="nisObject"
+#MAP_ATTRIBUTE="nisMapName"
+#ENTRY_ATTRIBUTE="cn"
+#VALUE_ATTRIBUTE="nisMapEntry"
+#
+# Other common LDAP nameing
+#
+#MAP_OBJECT_CLASS="automountMap"
+#ENTRY_OBJECT_CLASS="automount"
+#MAP_ATTRIBUTE="ou"
+#ENTRY_ATTRIBUTE="cn"
+#VALUE_ATTRIBUTE="automountInformation"
+#
+#MAP_OBJECT_CLASS="automountMap"
+#ENTRY_OBJECT_CLASS="automount"
+#MAP_ATTRIBUTE="automountMapName"
+#ENTRY_ATTRIBUTE="automountKey"
+#VALUE_ATTRIBUTE="automountInformation"
+#
+# AUTH_CONF_FILE - set the default location for the SASL
+# authentication configuration file.
+#
+#AUTH_CONF_FILE="/etc/autofs_ldap_auth.conf"
+#
+# MAP_HASH_TABLE_SIZE - set the map cache hash table size.
+# Should be a power of 2 with a ratio roughly
+# between 1:10 and 1:20 for each map.
+#
+#MAP_HASH_TABLE_SIZE=1024
+#
+# General global options
+#
+# If the kernel supports using the autofs miscellanous device
+# and you wish to use it you must set this configuration option
+# to "yes" otherwise it will not be used.
+USE_MISC_DEVICE="yes"
+#
+#OPTIONS=""
+#
--- /dev/null
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/autofs/files/autofs5.initd,v 1.3 2011/10/05 14:27:26 pva Exp $
+
+DAEMON=/usr/sbin/automount
+PIDFILE=/var/run/autofs.pid
+DEVICE=autofs
+
+depend() {
+ need localmount
+ use ypbind nfs slapd portmap net
+}
+
+extra_started_commands="reload"
+
+start() {
+ ebegin "Starting automounter"
+
+ # Ensure autofs support is loaded
+ grep -q autofs /proc/filesystems || modprobe -q autofs4
+ if [ $? -ne 0 ]; then
+ eend 1 "No autofs support available in kernel"
+ return 1
+ fi
+
+ # Check misc device
+ if [ -n "${USE_MISC_DEVICE}" -a "${USE_MISC_DEVICE}" = "yes" ]; then
+ sleep 1
+ if [ -e "/proc/misc" ]; then
+ MINOR=$(awk "/${DEVICE}/ {print \$1}" /proc/misc)
+ if [ -n "${MINOR}" -a ! -c "/dev/${DEVICE}" ]; then
+ mknod -m 0600 "/dev/${DEVICE}" c 10 ${MINOR}
+ if [ $? -ne 0 ]; then
+ eend 1 "Could not create '/dev/${DEVICE}'"
+ return 1
+ fi
+ fi
+ fi
+ if [ -x /sbin/restorecon -a -c "/dev/${DEVICE}" ]; then
+ /sbin/restorecon "/dev/${DEVICE}"
+ if [ $? -ne 0 ]; then
+ eend 1 "Failed to execute '/sbin/restorecon \"/dev/${DEVICE}\"'"
+ return 1
+ fi
+ fi
+ else
+ [ -c "/dev/${DEVICE}" ] && rm -rf "/dev/${DEVICE}"
+ fi
+
+ start-stop-daemon --start --exec ${DAEMON} -- -p ${PIDFILE} ${OPTIONS}
+
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping automounter"
+ start-stop-daemon --stop --quiet -R TERM/45 -p ${PIDFILE}
+ eend $?
+}
+
+reload() {
+ ebegin "Reloading automounter"
+ if [ ! -r "${PIDFILE}" ]; then
+ eend 1 "automount not running"
+ else
+ kill -HUP $(cat "${PIDFILE}") 2> /dev/null
+ eend $?
+ fi
+}
projects / config / uhu1 / etc.git / commitdiff