maybe chmod 0644 'conf.d/urandom'
maybe chmod 0700 'config-archive'
maybe chmod 0755 'config-archive/etc'
+maybe chmod 0644 'config-archive/etc/genkernel.conf'
+maybe chmod 0644 'config-archive/etc/genkernel.conf.dist.new'
maybe chmod 0755 'config-archive/etc/layman'
maybe chmod 0644 'config-archive/etc/layman/layman.cfg'
maybe chmod 0644 'config-archive/etc/layman/layman.cfg.dist.new'
+maybe chmod 0644 'config-archive/etc/locale.gen'
+maybe chmod 0644 'config-archive/etc/locale.gen.dist.new'
+maybe chmod 0755 'config-archive/etc/logrotate.d'
+maybe chmod 0644 'config-archive/etc/logrotate.d/rsyslog'
+maybe chmod 0644 'config-archive/etc/logrotate.d/rsyslog.dist.new'
+maybe chmod 0644 'config-archive/etc/rsyslog.conf'
+maybe chmod 0644 'config-archive/etc/rsyslog.conf.dist.new'
maybe chmod 0755 'config-archive/etc/rsyslog.d'
maybe chmod 0644 'config-archive/etc/rsyslog.d/50-default.conf'
maybe chmod 0644 'config-archive/etc/rsyslog.d/50-default.conf.dist.new'
+maybe chmod 0755 'config-archive/etc/systemd'
+maybe chmod 0644 'config-archive/etc/systemd/journald.conf'
+maybe chmod 0644 'config-archive/etc/systemd/journald.conf.dist.new'
+maybe chmod 0644 'config-archive/etc/systemd/resolved.conf'
+maybe chmod 0644 'config-archive/etc/systemd/resolved.conf.dist.new'
maybe chmod 0755 'cron.d'
maybe chmod 0644 'cron.d/.keep_sys-process_cronie-0'
maybe chmod 0755 'cron.daily'
--- /dev/null
+# Configuration file for genkernel
+
+# This file is sourced by genkernel at startup and determines which options
+# we will be using to compile our kernel. The order of precidence is simple,
+# with the internal settings being least important, configuration file
+# settings next, and command line options being most important.
+
+# =========Common Command Line Option Defaults=========
+
+# Should we install to $BOOTDIR? Default is "no" because genkernel is used in
+# catalyst and stage building.
+#INSTALL="yes"
+
+# Run 'make oldconfig' before compiling this kernel?
+OLDCONFIG="yes"
+
+# Run 'make menuconfig' before compiling this kernel?
+MENUCONFIG="no"
+
+# Run 'make nconfig' (ncurses 'menuconfig') before compiling this kernel?
+NCONFIG="no"
+
+# Note, that two previous lines are mutual exclusive (logically), while
+# MENUCONFIG has a higher priority if both them is enabled.
+
+# Run 'make clean' before compilation?
+# If set to NO, implies MRPROPER WILL NOT be run
+# Also, if clean is NO, it won't copy over any configuration
+# file, it will use what's there.
+CLEAN="yes"
+
+# Run 'make mrproper' before configuration/compilation?
+MRPROPER="yes"
+
+# Override the arch detection?
+#ARCH_OVERRIDE="x86"
+
+# Mount BOOTDIR automatically if it isn't mounted?
+MOUNTBOOT="yes"
+
+# Make symlinks in BOOTDIR automatically?
+#SYMLINK="no"
+
+# Save the new configuration in /etc/kernels upon
+# successfull compilation
+SAVE_CONFIG="yes"
+
+# Use Color output in Genkernel?
+USECOLOR="yes"
+
+# Clear build cache dir
+#CLEAR_CACHE_DIR="yes"
+
+# Clear all tmp files and caches after genkernel has run
+#POSTCLEAR="1"
+
+# Genkernel uses an independent configuration for MAKEOPTS, and does not source
+# /etc/make.conf . You can override the default setting by uncommenting and
+# tweaking the following line. Default setting is set up by
+# ${GK_SHARE}/${ARCH_OVERRIDE}/config.sh . The recommended value for -j
+# argument is: <number of processors>*<number of cores per processor>+1
+#MAKEOPTS="-j2"
+
+# Add in LVM support from static binaries if they exist on the system, or
+# compile static LVM binaries if static ones do not exist.
+#LVM="no"
+LVM="yes"
+
+# Add in Luks support. Needs sys-fs/cryptsetup with -dynamic installed.
+#LUKS="no"
+
+# Add in GnuPG support
+#GPG="no"
+
+# Add DMRAID support.
+#DMRAID="no"
+
+# Include (or suppresses the inclusion of) busybox in the initrd or initramfs.
+# If included, busybox is rebuilt if the cached copy is out of date.
+#BUSYBOX="yes"
+
+# Use udev instead of mdev as the default device manager for the initramfs.
+# If you use systemd and perhaps lvm, you _must_ keep this turned on.
+UDEV="yes"
+
+# Includes mdadm/mdmon binaries in initramfs.
+# Without sys-fs/mdadm[static] installed, this will build a static mdadm.
+#MDADM="no"
+
+# Specify a custom mdadm.conf.
+# By default the ramdisk will be built *without* an mdadm.conf and will auto-detect
+# arrays during bootup. Usually, this should not be needed.
+#MDADM_CONFIG="/etc/mdadm.conf"
+
+# Add Multipath support.
+#MULTIPATH="no"
+
+# Add iSCSI support.
+#ISCSI="no"
+
+# Add e2fsprogs support.
+#E2FSPROGS="no"
+E2FSPROGS="yes"
+
+# Enable copying of firmware into initramfs
+#FIRMWARE="no"
+# Specify directory to pull from
+#FIRMWARE_DIR="/lib/firmware"
+# Specify specific firmware files to include. This overrides FIRMWARE_DIR
+#FIRMWARE_FILES=""
+
+# Add new kernel to grub?
+#BOOTLOADER="grub"
+
+# Enable splashutils in early space (initrd). Default is "no".
+#SPLASH="yes"
+
+# Use this splash theme. If commented out - the "default" name theme is used.
+# Also, SPLASH="yes" needs to be enabled for this one to one work.
+# This supersedes the "SPLASH_THEME" option of /etc/conf.d/splash (in early space).
+#SPLASH_THEME="gentoo"
+
+# Installs, or not, plymouth into the initramfs. If "splash" will be
+# passed at boot, plymouth will be activated.
+# PLYMOUTH="yes"
+
+# Embeds the given plymouth theme into the initramfs.
+# PLYMOUTH_THEME="text"
+
+# =========Keymap Settings=========
+#
+# Force keymap selection at boot
+#DOKEYMAPAUTO="yes"
+
+
+# Disables keymap selection support
+#KEYMAP="0"
+
+
+# =========Low Level Compile Settings=========
+#
+# GNU Make to use for kernel. See also the --kernel-make command line option.
+#KERNEL_MAKE="make"
+
+# Compiler to use for the kernel (e.g. distcc). See also the --kernel-cc
+# command line option.
+#KERNEL_CC="gcc"
+
+# Assembler to use for the kernel. See also the --kernel-as command line
+# option.
+#KERNEL_AS="as"
+
+# Linker to use for the kernel. See also the --kernel-ld command line option.
+#KERNEL_LD="ld"
+
+# GNU Make to use for the utilities. See also the --utils-make command line
+# option.
+#UTILS_MAKE="make"
+
+# Compiler to use for the utilities (e.g. distcc). See also the --utils-cc
+# command line option.
+#UTILS_CC="gcc"
+
+# Assembler to use for the utilities. See also the --utils-as command line
+# option.
+#UTILS_AS="as"
+
+# Linker to use for the utilities. See also the --utils-ld command line
+# option.
+#UTILS_LD="ld"
+
+# =========GENKERNEL LOCATION CONFIGURATION============
+# Variables:
+# %%ARCH%% - Final determined architecture
+# %%CACHE%% - Final determined cache location
+
+# Set genkernel's temporary work directory. Default is /var/tmp/genkernel
+#TMPDIR="/var/tmp/genkernel"
+
+# Set the boot directory, default is /boot
+#BOOTDIR="/boot"
+
+# Default share directory location
+GK_SHARE="${GK_SHARE:-/usr/share/genkernel}"
+
+# Location of the default cache
+CACHE_DIR="/var/cache/genkernel"
+# Location of DISTDIR, where our source tarballs are stored
+DISTDIR="/var/lib/genkernel/src"
+# Log output file
+LOGFILE="/var/log/genkernel.log"
+# Debug Level
+LOGLEVEL=1
+
+# =========COMPILED UTILS CONFIGURATION============
+#
+# Default location of kernel source
+DEFAULT_KERNEL_SOURCE="/usr/src/linux"
+# Default kernel config (only use to override using
+# arch/%%ARCH%%/kernel-config-${VER}.${PAT} !)
+#DEFAULT_KERNEL_CONFIG="${GK_SHARE}/arch/%%ARCH%%/kernel-config"
+
+# Specifies a user created busybox config
+#BUSYBOX_CONFIG="/path/to/file"
+#BUSYBOX_APPLETS="[ ash sh mount uname echo cut cat"
+
+# NOTE: Since genkernel 3.4.41 the version of
+# busybox, lvm, mdadm, .. have been moved to
+# /usr/share/genkernel/defaults/software.sh in order to
+# reduce the merging you have to do during etc-update.
+# You can still override these settings in here.
+
+
+# =========MISC KERNEL CONFIGURATION============
+#
+# Tag the kernel and ramdisk with a name:
+# If not defined the option defaults to
+# 'genkernel'
+#KNAME="genkernel"
+
+
+# This option is only valid if kerncache is
+# defined. If there is a valid kerncache no checks
+# will be made against a kernel source tree
+#KERNEL_SOURCES="0"
+
+
+# Build a static (monolithic kernel)
+#BUILD_STATIC="1"
+
+
+# Make and install kernelz image (PowerPC)
+#GENZIMAGE="1"
+
+
+# File to output a .tar.bz2'd kernel contents
+# of /lib/modules/ and the kernel config
+# NOTE: This is created before the callbacks
+# are run!
+#KERNCACHE="/path/to/file"
+
+
+# Prefix to kernel module destination, modules
+# will be installed in <prefix>/lib/modules
+# (.conf equivalent of --module-prefix=<dir>)
+#INSTALL_MOD_PATH=""
+
+
+# =========MISC INITRD CONFIGURATION============
+#
+# Copy all kernel modules to the ramdisk
+#ALLRAMDISKMODULES="1"
+
+
+# Don't copy any modules to the ramdisk
+#RAMDISKMODULES="0"
+
+
+# File to output a .tar.bz2'd kernel and ramdisk:
+# No modules outside of the ramdisk will be
+# included...
+#MINKERNPACKAGE="/path/to/file.bz2"
+
+
+# File to output a .tar.bz2'd modules after the
+# callbacks have run
+#MODULESPACKAGE="/path/to/file.bz2"
+
+
+# Directory structure to include in the initramfs,
+# only available on >=2.6 kernels
+#INITRAMFS_OVERLAY=""
+
+
+# Build the generated initramfs into the kernel instead of
+# keeping it as a separate file
+#INTEGRATED_INITRAMFS="1"
+
+
+# Compress generated initramfs
+#COMPRESS_INITRD="yes"
+# Types of compression: best, xz, lzma, bzip2, gzip, lzop, fastest
+# "best" selects the best available compression method
+# "fastest" selects the fastest available compression method
+#COMPRESS_INITRD_TYPE="best"
+
+
+# Create a self-contained env in the initramfs
+#NETBOOT="1"
+
+
+# =========MISC BOOT CONFIGURATION============
+#
+# Specify a default for real_root=
+#REAL_ROOT="/dev/one/two/gentoo"
--- /dev/null
+# Configuration file for genkernel
+
+# This file is sourced by genkernel at startup and determines which options
+# we will be using to compile our kernel. The order of precidence is simple,
+# with the internal settings being least important, configuration file
+# settings next, and command line options being most important.
+
+# =========Common Command Line Option Defaults=========
+
+# Should we install to $BOOTDIR? Default is "no" because genkernel is used in
+# catalyst and stage building.
+#INSTALL="yes"
+
+# Run 'make oldconfig' before compiling this kernel?
+OLDCONFIG="yes"
+
+# Run 'make menuconfig' before compiling this kernel?
+MENUCONFIG="no"
+
+# Run 'make nconfig' (ncurses 'menuconfig') before compiling this kernel?
+NCONFIG="no"
+
+# Note, that two previous lines are mutual exclusive (logically), while
+# MENUCONFIG has a higher priority if both them is enabled.
+
+# Run 'make clean' before compilation?
+# If set to NO, implies MRPROPER WILL NOT be run
+# Also, if clean is NO, it won't copy over any configuration
+# file, it will use what's there.
+CLEAN="yes"
+
+# Run 'make mrproper' before configuration/compilation?
+MRPROPER="yes"
+
+# Override the arch detection?
+#ARCH_OVERRIDE="x86"
+
+# Mount BOOTDIR automatically if it isn't mounted?
+MOUNTBOOT="yes"
+
+# Make symlinks in BOOTDIR automatically?
+#SYMLINK="no"
+
+# Save the new configuration in /etc/kernels upon
+# successfull compilation
+SAVE_CONFIG="yes"
+
+# Use Color output in Genkernel?
+USECOLOR="yes"
+
+# Clear build cache dir
+#CLEAR_CACHE_DIR="yes"
+
+# Clear all tmp files and caches after genkernel has run
+#POSTCLEAR="1"
+
+# Genkernel uses an independent configuration for MAKEOPTS, and does not source
+# /etc/make.conf . You can override the default setting by uncommenting and
+# tweaking the following line. Default setting is set up by
+# ${GK_SHARE}/${ARCH_OVERRIDE}/config.sh . The recommended value for -j
+# argument is: <number of processors>*<number of cores per processor>+1
+#MAKEOPTS="-j2"
+
+# Add in LVM support from static binaries if they exist on the system, or
+# compile static LVM binaries if static ones do not exist.
+#LVM="no"
+
+# Add in Luks support. Needs sys-fs/cryptsetup with -dynamic installed.
+#LUKS="no"
+
+# Add in GnuPG support
+#GPG="no"
+
+# Add DMRAID support.
+#DMRAID="no"
+
+# Include (or suppresses the inclusion of) busybox in the initrd or initramfs.
+# If included, busybox is rebuilt if the cached copy is out of date.
+#BUSYBOX="yes"
+
+# Use udev instead of mdev as the default device manager for the initramfs.
+# If you use systemd and perhaps lvm, you _must_ keep this turned on.
+#UDEV="yes"
+
+# Includes mdadm/mdmon binaries in initramfs.
+# Without sys-fs/mdadm[static] installed, this will build a static mdadm.
+#MDADM="no"
+
+# Specify a custom mdadm.conf.
+# By default the ramdisk will be built *without* an mdadm.conf and will auto-detect
+# arrays during bootup. Usually, this should not be needed.
+#MDADM_CONFIG="/etc/mdadm.conf"
+
+# Add Multipath support.
+#MULTIPATH="no"
+
+# Add iSCSI support.
+#ISCSI="no"
+
+# Add e2fsprogs support.
+#E2FSPROGS="no"
+
+# Enable copying of firmware into initramfs
+#FIRMWARE="no"
+# Specify directory to pull from
+#FIRMWARE_DIR="/lib/firmware"
+# Specify specific firmware files to include. This overrides FIRMWARE_DIR
+#FIRMWARE_FILES=""
+
+# Add new kernel to grub?
+#BOOTLOADER="grub"
+
+# Enable splashutils in early space (initrd). Default is "no".
+#SPLASH="yes"
+
+# Use this splash theme. If commented out - the "default" name theme is used.
+# Also, SPLASH="yes" needs to be enabled for this one to one work.
+# This supersedes the "SPLASH_THEME" option of /etc/conf.d/splash (in early space).
+#SPLASH_THEME="gentoo"
+
+# Installs, or not, plymouth into the initramfs. If "splash" will be
+# passed at boot, plymouth will be activated.
+# PLYMOUTH="yes"
+
+# Embeds the given plymouth theme into the initramfs.
+# PLYMOUTH_THEME="text"
+
+# =========Keymap Settings=========
+#
+# Force keymap selection at boot
+#DOKEYMAPAUTO="yes"
+
+
+# Disables keymap selection support
+#KEYMAP="0"
+
+
+# =========Low Level Compile Settings=========
+#
+# GNU Make to use for kernel. See also the --kernel-make command line option.
+#KERNEL_MAKE="make"
+
+# Compiler to use for the kernel (e.g. distcc). See also the --kernel-cc
+# command line option.
+#KERNEL_CC="gcc"
+
+# Assembler to use for the kernel. See also the --kernel-as command line
+# option.
+#KERNEL_AS="as"
+
+# Linker to use for the kernel. See also the --kernel-ld command line option.
+#KERNEL_LD="ld"
+
+# GNU Make to use for the utilities. See also the --utils-make command line
+# option.
+#UTILS_MAKE="make"
+
+# Compiler to use for the utilities (e.g. distcc). See also the --utils-cc
+# command line option.
+#UTILS_CC="gcc"
+
+# Assembler to use for the utilities. See also the --utils-as command line
+# option.
+#UTILS_AS="as"
+
+# Linker to use for the utilities. See also the --utils-ld command line
+# option.
+#UTILS_LD="ld"
+
+# =========GENKERNEL LOCATION CONFIGURATION============
+# Variables:
+# %%ARCH%% - Final determined architecture
+# %%CACHE%% - Final determined cache location
+
+# Set genkernel's temporary work directory. Default is /var/tmp/genkernel
+#TMPDIR="/var/tmp/genkernel"
+
+# Set the boot directory, default is /boot
+#BOOTDIR="/boot"
+
+# Default share directory location
+GK_SHARE="${GK_SHARE:-/usr/share/genkernel}"
+
+# Location of the default cache
+CACHE_DIR="/var/cache/genkernel"
+# Location of DISTDIR, where our source tarballs are stored
+DISTDIR="/var/lib/genkernel/src"
+# Log output file
+LOGFILE="/var/log/genkernel.log"
+# Debug Level
+LOGLEVEL=1
+
+# =========COMPILED UTILS CONFIGURATION============
+#
+# Default location of kernel source
+DEFAULT_KERNEL_SOURCE="/usr/src/linux"
+# Default kernel config (only use to override using
+# arch/%%ARCH%%/kernel-config-${VER}.${PAT} !)
+#DEFAULT_KERNEL_CONFIG="${GK_SHARE}/arch/%%ARCH%%/kernel-config"
+
+# Specifies a user created busybox config
+#BUSYBOX_CONFIG="/path/to/file"
+#BUSYBOX_APPLETS="[ ash sh mount uname echo cut cat"
+
+# NOTE: Since genkernel 3.4.41 the version of
+# busybox, lvm, mdadm, .. have been moved to
+# /usr/share/genkernel/defaults/software.sh in order to
+# reduce the merging you have to do during etc-update.
+# You can still override these settings in here.
+
+
+# =========MISC KERNEL CONFIGURATION============
+#
+# Tag the kernel and ramdisk with a name:
+# If not defined the option defaults to
+# 'genkernel'
+#KNAME="genkernel"
+
+
+# This option is only valid if kerncache is
+# defined. If there is a valid kerncache no checks
+# will be made against a kernel source tree
+#KERNEL_SOURCES="0"
+
+
+# Build a static (monolithic kernel)
+#BUILD_STATIC="1"
+
+
+# Make and install kernelz image (PowerPC)
+#GENZIMAGE="1"
+
+
+# File to output a .tar.bz2'd kernel contents
+# of /lib/modules/ and the kernel config
+# NOTE: This is created before the callbacks
+# are run!
+#KERNCACHE="/path/to/file"
+
+
+# Prefix to kernel module destination, modules
+# will be installed in <prefix>/lib/modules
+# (.conf equivalent of --module-prefix=<dir>)
+#INSTALL_MOD_PATH=""
+
+
+# =========MISC INITRD CONFIGURATION============
+#
+# Copy all kernel modules to the ramdisk
+#ALLRAMDISKMODULES="1"
+
+
+# Don't copy any modules to the ramdisk
+#RAMDISKMODULES="0"
+
+
+# File to output a .tar.bz2'd kernel and ramdisk:
+# No modules outside of the ramdisk will be
+# included...
+#MINKERNPACKAGE="/path/to/file.bz2"
+
+
+# File to output a .tar.bz2'd modules after the
+# callbacks have run
+#MODULESPACKAGE="/path/to/file.bz2"
+
+
+# Directory structure to include in the initramfs,
+# only available on >=2.6 kernels
+#INITRAMFS_OVERLAY=""
+
+
+# Build the generated initramfs into the kernel instead of
+# keeping it as a separate file
+#INTEGRATED_INITRAMFS="1"
+
+
+# Compress generated initramfs
+#COMPRESS_INITRD="yes"
+# Types of compression: best, xz, lzma, bzip2, gzip, lzop, fastest
+# "best" selects the best available compression method
+# "fastest" selects the fastest available compression method
+#COMPRESS_INITRD_TYPE="best"
+
+
+# Create a self-contained env in the initramfs
+#NETBOOT="1"
+
+
+# =========MISC BOOT CONFIGURATION============
+#
+# Specify a default for real_root=
+#REAL_ROOT="/dev/one/two/gentoo"
--- /dev/null
+# /etc/locale.gen: list all of the locales you want to have on your system.
+# See the locale.gen(5) man page for more details.
+#
+# The format of each line:
+# <locale name> <charset>
+#
+# Where <locale name> starts with a name as found in /usr/share/i18n/locales/.
+# It must be unique in the file as it is used as the key to locale variables.
+# For non-default encodings, the <charset> is typically appended.
+#
+# Where <charset> is a charset located in /usr/share/i18n/charmaps/ (sans any
+# suffix like ".gz").
+#
+# All blank lines and lines starting with # are ignored.
+#
+# For the default list of supported combinations, see the file:
+# /usr/share/i18n/SUPPORTED
+#
+# Whenever glibc is emerged, the locales listed here will be automatically
+# rebuilt for you. After updating this file, you can simply run `locale-gen`
+# yourself instead of re-emerging glibc.
+
+#en_US ISO-8859-1
+#en_US.UTF-8 UTF-8
+#ja_JP.EUC-JP EUC-JP
+#ja_JP.UTF-8 UTF-8
+#ja_JP EUC-JP
+#en_HK ISO-8859-1
+#en_PH ISO-8859-1
+#de_DE ISO-8859-1
+#de_DE@euro ISO-8859-15
+#es_MX ISO-8859-1
+#fa_IR UTF-8
+#fr_FR ISO-8859-1
+#fr_FR@euro ISO-8859-15
+#it_IT ISO-8859-1
+
+en_AU.UTF-8 UTF-8
+en_GB.UTF-8 UTF-8
+en_IE.UTF-8 UTF-8
+en_IN UTF-8
+en_NZ.UTF-8 UTF-8
+en_US.UTF-8 UTF-8
+en_US ISO-8859-1
+en_ZA.UTF-8 UTF-8
+
+de_AT.UTF-8 UTF-8
+de_BE.UTF-8 UTF-8
+de_CH.UTF-8 UTF-8
+de_DE.UTF-8 UTF-8
+de_DE ISO-8859-1
+de_DE@euro ISO-8859-15
+de_LU.UTF-8 UTF-8
+
--- /dev/null
+# /etc/locale.gen: list all of the locales you want to have on your system.
+# See the locale.gen(5) man page for more details.
+#
+# The format of each line:
+# <locale name> <charset>
+#
+# Where <locale name> starts with a name as found in /usr/share/i18n/locales/.
+# It must be unique in the file as it is used as the key to locale variables.
+# For non-default encodings, the <charset> is typically appended.
+#
+# Where <charset> is a charset located in /usr/share/i18n/charmaps/ (sans any
+# suffix like ".gz").
+#
+# All blank lines and lines starting with # are ignored.
+#
+# For the default list of supported combinations, see the file:
+# /usr/share/i18n/SUPPORTED
+#
+# Whenever glibc is emerged, the locales listed here will be automatically
+# rebuilt for you. After updating this file, you can simply run `locale-gen`
+# yourself instead of re-emerging glibc.
+
+#en_US ISO-8859-1
+#en_US.UTF-8 UTF-8
+#ja_JP.EUC-JP EUC-JP
+#ja_JP.UTF-8 UTF-8
+#ja_JP EUC-JP
+#en_HK ISO-8859-1
+#en_PH ISO-8859-1
+#de_DE ISO-8859-1
+#de_DE@euro ISO-8859-15
+#es_MX ISO-8859-1
+#fa_IR UTF-8
+#fr_FR ISO-8859-1
+#fr_FR@euro ISO-8859-15
+#it_IT ISO-8859-1
--- /dev/null
+# Uncomment the following directive if you have re-enabled
+# "/var/log/syslog" in "/etc/rsyslog.d/50-default.conf"
+#/var/log/syslog
+#{
+# rotate 7
+# daily
+# missingok
+# notifempty
+# delaycompress
+# compress
+# postrotate
+# test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+# endscript
+#}
+
+/var/log/syslog /var/log/messages {
+ rotate 7
+ daily
+ missingok
+ notifempty
+ compress
+ delaycompress
+ dateext
+ size 4M
+ olddir /var/log/.old
+ sharedscripts
+ postrotate
+ test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+ endscript
+}
+
+/var/log/all.log
+/var/log/auth.log
+/var/log/cron.log
+/var/log/daemon.log
+/var/log/debug.log
+/var/log/kern.log
+/var/log/lpr.log
+/var/log/mail.log
+/var/log/news.log
+/var/log/user.log
+{
+ rotate 4
+ weekly
+ missingok
+ notifempty
+ compress
+ delaycompress
+ dateext
+ size 4M
+ olddir /var/log/.old
+ sharedscripts
+ postrotate
+ test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+ endscript
+}
+
+/var/log/syslog.d/*.log {
+ rotate 10
+ weekly
+ missingok
+ notifempty
+ size 4M
+ delaycompress
+ dateext
+ compress
+ olddir /var/log/syslog.d/.old
+ sharedscripts
+ postrotate
+ test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+ endscript
+}
+
+# vim: ts=4 filetype=conf et
--- /dev/null
+# Uncomment the following directive if you have re-enabled
+# "/var/log/syslog" in "/etc/rsyslog.d/50-default.conf"
+#/var/log/syslog
+#{
+# rotate 7
+# daily
+# missingok
+# notifempty
+# delaycompress
+# compress
+# postrotate
+# test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+# endscript
+#}
+
+/var/log/auth.log
+/var/log/cron.log
+/var/log/daemon.log
+/var/log/kern.log
+/var/log/lpr.log
+/var/log/mail.log
+/var/log/news.log
+/var/log/user.log
+/var/log/debug.log
+/var/log/messages
+{
+ rotate 4
+ weekly
+ missingok
+ notifempty
+ compress
+ delaycompress
+ sharedscripts
+ postrotate
+ test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+ endscript
+}
--- /dev/null
+# /etc/rsyslog.conf
+#
+# This configuration is based on RainerScript, the new recommended syntax
+# for RSYSLOG. See http://www.rsyslog.com/doc/rainerscript.html for further
+# details.
+#
+# But if you don't want to learn something new at moment, don't worry: The
+# legacy syntax is still supported.
+#
+# You may want to use the new RSYSLOG configuration builder to create your
+# own more advanced configuration: http://www.rsyslog.com/rsyslog-configuration-builder/
+
+# Check config syntax on startup and abort if unclean (default: off)
+$AbortOnUncleanConfig on
+
+
+###############
+### MODULES ###
+###############
+
+# Read syslog messages from default Unix socket /dev/log (e.g. via logger command)
+module(load="imuxsock")
+
+# Read messages from the kernel log and submits them to the syslog engine
+module(load="imklog")
+
+# Inject "--MARK--" messages every $Interval (seconds)
+module(load="immark" Interval="3600")
+
+# Read syslog messages from UDP
+#module(load="imudp")
+#input(type="imudp" port="514")
+
+# Read syslog messages from TCP
+#module(load="imtcp")
+#input(type="imtcp" port="514")
+
+module(load="impstats"
+ interval="43200"
+ severity="7"
+ log.syslog="off"
+ /* need to turn log stream logging off! */
+ log.file="/var/log/syslog.d/stats.log")
+
+
+#########################
+### GLOBAL DIRECTIVES ###
+#########################
+
+# Where to place spool and state files
+$WorkDirectory /var/spool/rsyslog
+
+# Reduce repeating messages (default: off)
+#$RepeatedMsgReduction on
+
+# Set defaults for every output file
+$Umask 0022
+
+module(
+ load="builtin:omfile"
+ Template="RSYSLOG_FileFormat"
+ FileCreateMode="0644"
+ DirCreateMode="0755"
+ fileOwnerNum="0"
+ fileGroupNum="0"
+ dirOwnerNum="0"
+ dirGroupNum="0"
+)
+
+
+# Include all conf files in /etc/rsyslog.d/
+$IncludeConfig /etc/rsyslog.d/*.conf
--- /dev/null
+# /etc/rsyslog.conf
+#
+# This configuration is based on RainerScript, the new recommended syntax
+# for RSYSLOG. See http://www.rsyslog.com/doc/rainerscript.html for further
+# details.
+#
+# But if you don't want to learn something new at moment, don't worry: The
+# legacy syntax is still supported.
+#
+# You may want to use the new RSYSLOG configuration builder to create your
+# own more advanced configuration: http://www.rsyslog.com/rsyslog-configuration-builder/
+
+# Check config syntax on startup and abort if unclean (default: off)
+#$AbortOnUncleanConfig on
+
+
+###############
+### MODULES ###
+###############
+
+# Read syslog messages from default Unix socket /dev/log (e.g. via logger command)
+module(load="imuxsock")
+
+# Read messages from the kernel log and submits them to the syslog engine
+module(load="imklog")
+
+# Inject "--MARK--" messages every $Interval (seconds)
+#module(load="immark" Interval="600")
+
+# Read syslog messages from UDP
+#module(load="imudp")
+#input(type="imudp" port="514")
+
+# Read syslog messages from TCP
+#module(load="imtcp")
+#input(type="imtcp" port="514")
+
+
+#########################
+### GLOBAL DIRECTIVES ###
+#########################
+
+# Where to place spool and state files
+$WorkDirectory /var/spool/rsyslog
+
+# Reduce repeating messages (default: off)
+#$RepeatedMsgReduction on
+
+# Set defaults for every output file
+$Umask 0022
+
+module(
+ load="builtin:omfile"
+ Template="RSYSLOG_TraditionalFileFormat"
+ FileCreateMode="0644"
+ DirCreateMode="0755"
+)
+
+
+# Include all conf files in /etc/rsyslog.d/
+$IncludeConfig /etc/rsyslog.d/*.conf
--- /dev/null
+# This file is part of systemd.
+#
+# systemd is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2.1 of the License, or
+# (at your option) any later version.
+#
+# Entries in this file show the compile time defaults.
+# You can change settings by editing this file.
+# Defaults can be restored by simply deleting this file.
+#
+# See journald.conf(5) for details.
+
+[Journal]
+#Storage=auto
+#Compress=yes
+#Seal=yes
+#SplitMode=uid
+#SyncIntervalSec=5m
+#RateLimitInterval=30s
+#RateLimitBurst=1000
+#SystemMaxUse=
+#SystemKeepFree=
+#SystemMaxFileSize=
+#RuntimeMaxUse=
+#RuntimeKeepFree=
+#RuntimeMaxFileSize=
+#MaxRetentionSec=
+#MaxFileSec=1month
+#ForwardToSyslog=no
+ForwardToSyslog=yes
+#ForwardToKMsg=no
+#ForwardToConsole=no
+#ForwardToWall=yes
+#TTYPath=/dev/console
+#MaxLevelStore=debug
+#MaxLevelSyslog=debug
+#MaxLevelKMsg=notice
+#MaxLevelConsole=info
+#MaxLevelWall=emerg
--- /dev/null
+# This file is part of systemd.
+#
+# systemd is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2.1 of the License, or
+# (at your option) any later version.
+#
+# Entries in this file show the compile time defaults.
+# You can change settings by editing this file.
+# Defaults can be restored by simply deleting this file.
+#
+# See journald.conf(5) for details.
+
+[Journal]
+#Storage=auto
+#Compress=yes
+#Seal=yes
+#SplitMode=uid
+#SyncIntervalSec=5m
+#RateLimitInterval=30s
+#RateLimitBurst=1000
+#SystemMaxUse=
+#SystemKeepFree=
+#SystemMaxFileSize=
+#RuntimeMaxUse=
+#RuntimeKeepFree=
+#RuntimeMaxFileSize=
+#MaxRetentionSec=
+#MaxFileSec=1month
+#ForwardToSyslog=no
+#ForwardToKMsg=no
+#ForwardToConsole=no
+#ForwardToWall=yes
+#TTYPath=/dev/console
+#MaxLevelStore=debug
+#MaxLevelSyslog=debug
+#MaxLevelKMsg=notice
+#MaxLevelConsole=info
+#MaxLevelWall=emerg
--- /dev/null
+# This file is part of systemd.
+#
+# systemd is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2.1 of the License, or
+# (at your option) any later version.
+#
+# Entries in this file show the compile time defaults.
+# You can change settings by editing this file.
+# Defaults can be restored by simply deleting this file.
+#
+# See resolved.conf(5) for details
+
+[Resolve]
+#DNS=
+#FallbackDNS=8.8.8.8 8.8.4.4 2001:4860:4860::8888 2001:4860:4860::8844
+#LLMNR=yes
+DNS=217.66.52.10 212.91.225.75
+#Domains=pixelpark.com brehm-online.com uhu-banane.de uhu-banane.net
+
--- /dev/null
+# This file is part of systemd.
+#
+# systemd is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2.1 of the License, or
+# (at your option) any later version.
+#
+# Entries in this file show the compile time defaults.
+# You can change settings by editing this file.
+# Defaults can be restored by simply deleting this file.
+#
+# See resolved.conf(5) for details
+
+[Resolve]
+#DNS=
+#FallbackDNS=8.8.8.8 8.8.4.4 2001:4860:4860::8888 2001:4860:4860::8844
+#LLMNR=yes
+~app-admin/puppet-4.8.1
+
app-misc/ddate
~net-nds/phpldapadmin-1.2.3
projects / config / berta / etc.git / commitdiff