saving uncommitted changes in /etc prior to emerge run

diff --git a/config-archive/etc/rc.conf.3 b/config-archive/etc/rc.conf.3
new file mode 100644 (file)
index 0000000..b1b3448
--- /dev/null
+++ b/config-archive/etc/rc.conf.3
@@ -0,0 +1,163 @@
+# Global OpenRC configuration settings
+
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with its name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
+rc_parallel="YES"
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
+#rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+rc_shell=/sbin/sulogin
+
+# Do we allow any started service in the runlevel to satisfy the dependency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+#rc_depend_strict="YES"
+
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be plugged.
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+rc_logger="YES"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+rc_log_path="/var/log/rc.log"
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+unicode="YES"
+
+# Below is the default list of network fstypes.
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#export SSD_NICELEVEL="-19"
+
+# Pass ulimit parameters
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which servies do NOT provide net.
+#rc_net_tap0_provide="!net"
+
+##############################################################################
+# LINUX SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on Linux:
+# ""        - nothing special
+# "lxc"     - Linux Containers
+# "openvz"  - Linux OpenVZ
+# "prefix"  - Prefix
+# "uml"     - Usermode Linux
+# "vserver" - Linux vserver
+# "xen0"    - Xen0 Domain
+# "xenU"    - XenU Domain
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+rc_tty_number=12
+
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controller is mounted under
+# /sys/fs/cgroup.
+# Support for process management by cgroups is planned in the future,
+# so if you turn this off, be aware that you may not be able to use that
+# feature.
+#rc_controller_cgroups="YES"