export IN_BACKGROUND=YES
case "$2" in
- up) nm-online -t 0 -x && exec rc-service NetworkManager start ;;
- down) nm-online -t 0 -x || exec rc-service NetworkManager stop ;;
- pre-sleep) exec rc-service NetworkManager stop ;;
+ up) nm-online -t 0 -x &&
+ ! rc-service NetworkManager status 2>&1 | grep -q started &&
+ exec rc-service NetworkManager start ;;
+ down) nm-online -t 0 -x ||
+ rc-service NetworkManager status 2>&1 | grep -q stopped ||
+ exec rc-service NetworkManager stop ;;
+ pre-sleep) rc-service NetworkManager status 2>&1 | grep -q stopped ||
+ exec rc-service NetworkManager stop ;;
esac
+exit 0
+# vim: set ts=4:
--- /dev/null
+#################################################################
+################## EXPLANATION OF SETTINGS ######################
+#################################################################
+
+# XFT settings are like a red-headed stepchild that should be beaten severely.
+# These only affect legacy programs, and *parts* of some modern programs like
+# google-chrome. We only deal with these settings because we have to, otherwise
+# crap will slip by. I recommend using hintslight and autohint as the defaults
+# normally in local.conf. The reason hintfull and autohint:0 is needed here
+# because otherwise some programs will occassionally request slight hinting for
+# a truetype font. When a program does this, Freetype automatically uses the
+# autohinter, when you may actually want it to be rendered with the TT hinter,
+# (if specified in local.conf). So setting this to hintfull guarantees that the
+# TT font will be rendered with the TT hinter (assuming it is specified in
+# /etc/fonts/local.conf to be rendered that way.) For TT fonts that you want
+# rendered with autohint, specifiying that in the /etc/fonts/local.conf
+# should be enough. But you might think that by setting this to hintfull
+# that it's going to use Freetype's full autohinting (which we *completely*
+# avoid) for fonts you want autohinted. This is where
+# INFINALITY_FT_AUTOFIT_FORCE_SLIGHT_HINTING comes in. It tells freetype to
+# use slight hinting on fonts set for autohinting, even if the program requests
+# full autohinting. Freetype's full hinting only looks OK under certain
+# circumstances. The goal of infinality is to make infinality hinting look
+# good all the time.
+
+Xft.antialias: 1
+Xft.autohint: 0
+Xft.dpi: 96
+Xft.hinting: 1
+Xft.hintstyle: hintfull
+Xft.lcdfilter: lcddefault
+Xft.rgba: rgb
#!/bin/sh
-if [ -z ${XDG_MENU_PREFIX} ] && [ "${DESKTOP_SESSION}" = "KDE-4" ]; then
+if [ -z "${XDG_MENU_PREFIX}" ] && [ "${DESKTOP_SESSION}" = "KDE-4" ]; then
export XDG_MENU_PREFIX="kde-4-"
fi
--- /dev/null
+#!/bin/sh
+# /etc/acpi/powerbtn.sh
+# Taken from Debian's 2.0.4-1 diff file. This version handles KDE4.
+# Power Button event handler.
+# Checks to see if gnome or KDE are already handling the power button.
+# If not, initiates a plain shutdown.
+
+# getXuser gets the X user belonging to the display in $displaynum.
+# If you want the foreground X user, use getXconsole!
+# Input:
+# displaynum - X display number
+# Output:
+# XUSER - the name of the user
+# XAUTHORITY - full pathname of the user's .Xauthority file
+getXuser() {
+ user=`pinky -fw | awk '{ if ($2 == ":'$displaynum'" || $(NF) == ":'$displaynum'" ) { print $1; exit; } }'`
+ if [ x"$user" = x"" ]; then
+ startx=`pgrep -n startx`
+ if [ x"$startx" != x"" ]; then
+ user=`ps -o user --no-headers $startx`
+ fi
+ fi
+ if [ x"$user" != x"" ]; then
+ userhome=`getent passwd $user | cut -d: -f6`
+ export XAUTHORITY=$userhome/.Xauthority
+ else
+ export XAUTHORITY=""
+ fi
+ export XUSER=$user
+}
+
+# Gets the X display number for the active virtual terminal.
+# Output:
+# DISPLAY - the X display number
+# See getXuser()'s output.
+getXconsole() {
+ console=`fgconsole`;
+ displaynum=`ps t tty$console | sed -n -re 's,.*/X .*:([0-9]+).*,\1,p'`
+ if [ x"$displaynum" != x"" ]; then
+ export DISPLAY=":$displaynum"
+ getXuser
+ fi
+}
+
+# Skip if we are just in the middle of resuming.
+test -f /var/lock/acpisleep && exit 0
+
+# If the current X console user is running a power management daemon that
+# handles suspend/resume requests, let them handle policy.
+
+getXconsole
+
+# A list of power management system process names.
+PMS="gnome-power-manager kpowersave xfce4-power-manager"
+PMS="$PMS guidance-power-manager.py dalston-power-applet"
+
+# If one of those is running or any of several others,
+if pidof x $PMS > /dev/null ||
+ ( test "$XUSER" != "" && pidof dcopserver > /dev/null && test -x /usr/bin/dcop && /usr/bin/dcop --user $XUSER kded kded loadedModules | grep -q klaptopdaemon) ||
+ ( test "$XUSER" != "" && test -x /usr/bin/qdbus && test -r /proc/$(pidof kded4)/environ && su - $XUSER -c "eval $(echo -n 'export '; cat /proc/$(pidof kded4)/environ |tr '\0' '\n'|grep DBUS_SESSION_BUS_ADDRESS); qdbus org.kde.kded" | grep -q powerdevil) ; then
+ # Get out as the power manager that is running will take care of things.
+ exit
+fi
+
+# No power managment system appears to be running. Just initiate a plain
+# shutdown.
+/sbin/shutdown -h now "Power button pressed"
+
button)
case "$action" in
power)
- /sbin/init 0
+ /etc/acpi/actions/powerbtn.sh
;;
# if your laptop doesnt turn on/off the display via hardware
+++ /dev/null
-<IfDefine PERL>
-LoadModule perl_module modules/mod_perl.so
-
-#PerlTrace all
-PerlRequire "/etc/apache2/modules.d/apache2-mod_perl-startup.pl"
-PerlModule ModPerl::Registry
-
-# Provide two aliases to the same cgi-bin directory, to see the effects of the
-# 2 different mod_perl modes for Apache2::Registry Mode
-Alias /perl/ /var/www/localhost/perl/
-# for Apache2::Perlrun Mode
-Alias /cgi-perl/ /var/www/localhost/perl/
-
-<Location /perl-status>
- SetHandler perl-script
- PerlResponseHandler Apache2::Status
- Order deny,allow
- Deny from all
- Allow from 127.0.0.1
-</Location>
-
-<Directory /home/*/public_html/perl>
- SetHandler perl-script
- PerlResponseHandler ModPerl::PerlRun
- Options -Indexes ExecCGI
- PerlOptions +ParseHeaders
-</Directory>
-
-# set Apache::Registry Mode for /perl Alias
-<Location /perl/*.pl>
- SetHandler perl-script
- PerlResponseHandler ModPerl::Registry
- Options -Indexes ExecCGI
- PerlSendHeader On
- Order allow,deny
- Allow from all
-</Location>
-
-# set Apache::PerlRun Mode for /cgi-perl Alias
-<Location /cgi-perl/*.pl>
- SetHandler perl-script
- PerlResponseHandler ModPerl::PerlRun
- Options -Indexes ExecCGI
- PerlSendHeader On
- Order allow,deny
- Allow from all
-</Location>
-</IfDefine>
-
-# vim: ts=4 filetype=apache
+++ /dev/null
-use lib qw(/home/httpd/perl);
-
-# enable if the mod_perl 1.0 compatibility is needed
-#use Apache2::compat ();
-
-use ModPerl::Util (); #for CORE::GLOBAL::exit
-
-use Apache2::RequestRec ();
-use Apache2::RequestIO ();
-use Apache2::RequestUtil ();
-
-use Apache2::ServerRec ();
-use Apache2::ServerUtil ();
-use Apache2::Connection ();
-use Apache2::Log ();
-
-use APR::Table ();
-
-use ModPerl::Registry ();
-
-use Apache2::Const -compile => ':common';
-use APR::Const -compile => ':common';
-
-1;
--- /dev/null
+../../usr/share/bash-completion/eselect
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/git-prompt
\ No newline at end of file
# If we want to disable support for specific services
# Defaults to supporting all implemented services
-#Disable=Control,Source
+#Disable=Gateway,Source,Socket
# SCO routing. Either PCM or HCI (in which case audio is routed to/from ALSA)
# Defaults to HCI
MaxConnected=1
# Set to true to enable use of fast connectable mode (faster page scanning)
-# for HFP when incomming call starts. Default settings are restored after
+# for HFP when incoming call starts. Default settings are restored after
# call is answered or rejected. Page scan interval is much shorter and page
# scan type changed to interlaced. Such allows faster connection initiated
# by a headset.
# which is 16384 (10 seconds).
PageTimeout = 8192
-# Discover scheduler interval used in Adapter.DiscoverDevices
-# The value is in seconds. Defaults is 30.
-DiscoverSchedulerInterval = 30
-
# Automatic connection for bonded devices driven by platform/user events.
# If a platform plugin uses this mechanism, automatic connections will be
# enabled during the interval defined below. Initially, this feature
# Remember the previously stored Powered state when initializing adapters
RememberPowered = true
-# Use vendor, product and version information for DID profile support.
-# The values are separated by ":" and VID, PID and version.
-#DeviceID = 1234:5678:abcd
+# Use vendor id source (assigner), vendor, product and version information for
+# DID profile support. The values are separated by ":" and assigner, VID, PID
+# and version.
+# Possible vendor id source values: bluetooth, usb (defaults to usb)
+#DeviceID = bluetooth:1234:5678:abcd
# Do reverse service discovery for previously unknown devices that connect to
# us. This option is really only needed for qualification since the BITE tester
# that they were created for.
DebugKeys = false
-# Enable the GATT Attribute Server. Default is false, because it is only
-# useful for testing.
-AttributeServer = false
+# Enable the GATT functionality. Default is false
+EnableGatt = false
# To make the patch file *include* colours, change the option
# below to 'yes'
color_patches=no
+# Sometimes it can be useful to specify which diff command to
+# use: that can be specified here
+diff_cmd=diff
#
# available colours are: white, yellow, green, blue,
# cyan, red, magenta, black,
# To make the patch file *include* colours, change the option
# below to 'yes'
color_patches=no
+# Sometimes it can be useful to specify which diff command to
+# use: that can be specified here
+diff_cmd=diff
#
# available colours are: white, yellow, green, blue,
# cyan, red, magenta, black,
# --export-all --- Exports all repositories
# --port=XXXX --- Starts in port XXXX instead of 9418
#
-GITDAEMON_OPTS="--syslog /var/git"
+GITDAEMON_OPTS="--syslog --base-path=/var/git"
# To run an anonymous git safely, the following user should be able to only
# read your Git repositories. It should not able able to write to anywhere on
# /etc/conf.d/udev: config file for udev
-# We discourage to disable persistent-net!!
-# this may lead to random interface naming
-
-# Disable adding new rules for persistent-net
-persistent_net_disable="no"
-
-# Disable adding new rules for persistent-cd
-# Disabling this will stop new cdrom devices to appear
-# as /dev/{cdrom,cdrw,dvd,dvdrw}
-persistent_cd_disable="no"
-
# udev can trigger coldplug events which cause services to start and
# kernel modules to be loaded.
# Services are deferred to start in the boot runlevel.
# in /etc/conf.d/rc: rc_plug_services="!*"
#rc_coldplug="YES"
-
-
-
# Expert options:
# Timeout in seconds to wait for processing of uevents at boot.
# udevd --help for possible values
#udev_opts=""
-# Run udevd --debug and write output to $RUNDIR/udev.log
+# Run udevd --debug and write output to /run/udevdebug.log
# Should not be kept on as it fills diskspace slowly
#udev_debug="YES"
# Run udevadmin monitor to get a log of all events
-# in $RUNDIR/udevmonitor.log
+# in /run/udevmonitor.log
#udev_monitor="YES"
# Keep udevmonitor running after populating /dev.
--- /dev/null
+# Basic system aliases -- these MUST be present.
+MAILER-DAEMON: postmaster
+postmaster: root
+root: frank
+
+# General redirections for pseudo accounts.
+adm: root
+bin: root
+daemon: root
+exim: root
+lp: root
+mail: root
+named: root
+postfix: root
+
+# Well-known aliases -- these should be filled in!
+# root:
+# operator:
+
+# Standard RFC2142 aliases
+abuse: postmaster
+ftp: root
+hostmaster: root
+news: usenet
+noc: root
+security: root
+usenet: root
+uucp: root
+webmaster: root
+www: webmaster
+
+# trap decode to catch security attacks
+noreply: /dev/null
+decode: noreply
+nobody: noreply
+
+# Persönliche Aliase
+
+# Frank Brehm
+frank: frank@brehm-online.com
+fbr: frank
+brehm: frank
+fbrehm: frank
+f.brehm: frank
+f-brehm: frank
+frank.brehm: frank
+frank-brehm: frank
+
+# Doris Hennig
+doris: doris@hennig-berlin.org
+
+# Heiko Hennig
+patrick: hennig-patrick@gmx.de
+
+# Heiko Hennig
+heiko: heiko-monkey-hennig@gmx.de
+
+# Vivien Winkler
+vivi: viviwinkler@gmx.de
+
+
--- /dev/null
+# Basic system aliases -- these MUST be present.
+MAILER-DAEMON: postmaster
+postmaster: root
+
+# General redirections for pseudo accounts.
+adm: root
+bin: root
+daemon: root
+exim: root
+lp: root
+mail: root
+named: root
+nobody: root
+postfix: root
+
+# Well-known aliases -- these should be filled in!
+# root:
+# operator:
+
+# Standard RFC2142 aliases
+abuse: postmaster
+ftp: root
+hostmaster: root
+news: usenet
+noc: root
+security: root
+usenet: root
+uucp: root
+webmaster: root
+www: webmaster
+
+# trap decode to catch security attacks
+# decode: /dev/null
# /etc/mysql/my.cnf: The global mysql configuration file.
-# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.2 2010/03/24 18:26:09 robbat2 Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.3 2012/02/15 02:07:21 jmbsvicetto Exp $
# The following options will be passed to all MySQL clients
[client]
key_buffer = 16M
max_allowed_packet = 1M
table_cache = 64
+table_open_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
--- /dev/null
+# /etc/mysql/my.cnf: The global mysql configuration file.
+# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.2 2010/03/24 18:26:09 robbat2 Exp $
+
+# The following options will be passed to all MySQL clients
+[client]
+#password = your_password
+port = 3306
+socket = /var/run/mysqld/mysqld.sock
+
+[mysql]
+character-sets-dir=/usr/share/mysql/charsets
+default-character-set=utf8
+prompt = MySQL \u@\h:\d >\_
+
+[mysqladmin]
+character-sets-dir=/usr/share/mysql/charsets
+default-character-set=utf8
+
+[mysqlcheck]
+character-sets-dir=/usr/share/mysql/charsets
+default-character-set=utf8
+
+[mysqldump]
+character-sets-dir=/usr/share/mysql/charsets
+default-character-set=utf8
+
+[mysqlimport]
+character-sets-dir=/usr/share/mysql/charsets
+default-character-set=utf8
+
+[mysqlshow]
+character-sets-dir=/usr/share/mysql/charsets
+default-character-set=utf8
+
+[myisamchk]
+character-sets-dir=/usr/share/mysql/charsets
+
+[myisampack]
+character-sets-dir=/usr/share/mysql/charsets
+
+# use [safe_mysqld] with mysql-3
+[mysqld_safe]
+err-log = /var/log/mysql/mysql.err
+
+# add a section [mysqld-4.1] or [mysqld-5.0] for specific configurations
+[mysqld]
+character-set-server = utf8
+default-character-set = utf8
+user = mysql
+port = 3306
+socket = /var/run/mysqld/mysqld.sock
+pid-file = /var/run/mysqld/mysqld.pid
+log-error = /var/log/mysql/mysqld.err
+basedir = /usr
+#datadir = /var/lib/mysql
+datadir = /data/mysql
+skip-external-locking
+key_buffer = 16M
+max_allowed_packet = 1M
+table_cache = 64
+sort_buffer_size = 512K
+net_buffer_length = 8K
+read_buffer_size = 256K
+read_rnd_buffer_size = 512K
+myisam_sort_buffer_size = 8M
+language = /usr/share/mysql/german
+
+# security:
+# using "localhost" in connects uses sockets by default
+# skip-networking
+#bind-address = 127.0.0.1
+
+log-bin
+server-id = 1
+
+# point the following paths to different dedicated disks
+tmpdir = /tmp/
+#log-update = /path-to-dedicated-directory/hostname
+
+# you need the debug USE flag enabled to use the following directives,
+# if needed, uncomment them, start the server and issue
+# #tail -f /tmp/mysqld.sql /tmp/mysqld.trace
+# this will show you *exactly* what's happening in your server ;)
+
+#log = /tmp/mysqld.sql
+#gdb
+#debug = d:t:i:o,/tmp/mysqld.trace
+#one-thread
+
+# uncomment the following directives if you are using BDB tables
+#bdb_cache_size = 4M
+#bdb_max_lock = 10000
+
+# the following is the InnoDB configuration
+# if you wish to disable innodb instead
+# uncomment just the next line
+#skip-innodb
+#
+# the rest of the innodb config follows:
+# don't eat too much memory, we're trying to be safe on 64Mb boxes
+# you might want to bump this up a bit on boxes with more RAM
+innodb_buffer_pool_size = 16M
+# this is the default, increase it if you have lots of tables
+innodb_additional_mem_pool_size = 2M
+#
+# i'd like to use /var/lib/mysql/innodb, but that is seen as a database :-(
+# and upstream wants things to be under /var/lib/mysql/, so that's the route
+# we have to take for the moment
+#innodb_data_home_dir = /var/lib/mysql/
+#innodb_log_arch_dir = /var/lib/mysql/
+#innodb_log_group_home_dir = /var/lib/mysql/
+# you may wish to change this size to be more suitable for your system
+# the max is there to avoid run-away growth on your machine
+innodb_data_file_path = ibdata1:10M:autoextend:max:128M
+# we keep this at around 25% of of innodb_buffer_pool_size
+# sensible values range from 1MB to (1/innodb_log_files_in_group*innodb_buffer_pool_size)
+innodb_log_file_size = 5M
+# this is the default, increase it if you have very large transactions going on
+innodb_log_buffer_size = 8M
+# this is the default and won't hurt you
+# you shouldn't need to tweak it
+innodb_log_files_in_group=2
+# see the innodb config docs, the other options are not always safe
+innodb_flush_log_at_trx_commit = 1
+innodb_lock_wait_timeout = 50
+innodb_file_per_table
+
+[mysqldump]
+quick
+max_allowed_packet = 16M
+
+[mysql]
+# uncomment the next directive if you are not familiar with SQL
+#safe-updates
+
+[isamchk]
+key_buffer = 20M
+sort_buffer_size = 20M
+read_buffer = 2M
+write_buffer = 2M
+
+[myisamchk]
+key_buffer = 20M
+sort_buffer_size = 20M
+read_buffer = 2M
+write_buffer = 2M
+
+[mysqlhotcopy]
+interactive-timeout
# /etc/mysql/my.cnf: The global mysql configuration file.
-# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.3 2012/02/15 02:07:21 jmbsvicetto Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.4 2013/01/20 02:40:02 robbat2 Exp $
# The following options will be passed to all MySQL clients
[client]
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.3/html
+html_directory = /usr/share/doc/postfix-2.9.4/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.3/readme
+readme_directory = /usr/share/doc/postfix-2.9.4/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
-daemon_directory = /usr/lib64/postfix
+daemon_directory = /usr/libexec/postfix
# The data_directory parameter specifies the location of Postfix-writable
# data files (caches, random numbers). This directory must be owned
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
-#mailbox_transport = lmtp:unix:/file/name
+# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd"
+# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf.
+#mailbox_transport = lmtp:unix:/var/imap/socket/lmtp
+#
+# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and
+# subsequent line in master.cf.
#mailbox_transport = cyrus
# The fallback_transport specifies the optional transport in master.cf
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.8.9/html
+html_directory = /usr/share/doc/postfix-2.9.3/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.8.9/readme
+readme_directory = /usr/share/doc/postfix-2.9.3/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.8.7/html
+html_directory = /usr/share/doc/postfix-2.8.9/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.8.7/readme
+readme_directory = /usr/share/doc/postfix-2.8.9/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table
-mynetworks = 10.12.11.0/24
+mynetworks = 10.12.11.0/24, 127.0.0.0/8, [::1]/128, [2001:6f8:1db7::]/64
# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions description in
--- /dev/null
+# Global Postfix configuration file. This file lists only a subset
+# of all parameters. For the syntax, and for a complete parameter
+# list, see the postconf(5) manual page (command: "man 5 postconf").
+#
+# For common configuration examples, see BASIC_CONFIGURATION_README
+# and STANDARD_CONFIGURATION_README. To find these documents, use
+# the command "postconf html_directory readme_directory", or go to
+# http://www.postfix.org/.
+#
+# For best results, change no more than 2-3 parameters at a time,
+# and test if Postfix still works after every change.
+
+# SOFT BOUNCE
+#
+# The soft_bounce parameter provides a limited safety net for
+# testing. When soft_bounce is enabled, mail will remain queued that
+# would otherwise bounce. This parameter disables locally-generated
+# bounces, and prevents the SMTP server from rejecting mail permanently
+# (by changing 5xx replies into 4xx replies). However, soft_bounce
+# is no cure for address rewriting mistakes or mail routing mistakes.
+#
+#soft_bounce = no
+
+# LOCAL PATHNAME INFORMATION
+#
+# The queue_directory specifies the location of the Postfix queue.
+# This is also the root directory of Postfix daemons that run chrooted.
+# See the files in examples/chroot-setup for setting up Postfix chroot
+# environments on different UNIX systems.
+#
+queue_directory = /var/spool/postfix
+
+# The command_directory parameter specifies the location of all
+# postXXX commands.
+#
+command_directory = /usr/sbin
+
+# The daemon_directory parameter specifies the location of all Postfix
+# daemon programs (i.e. programs listed in the master.cf file). This
+# directory must be owned by root.
+#
+daemon_directory = /usr/lib64/postfix
+
+# The data_directory parameter specifies the location of Postfix-writable
+# data files (caches, random numbers). This directory must be owned
+# by the mail_owner account (see below).
+#
+data_directory = /var/lib/postfix
+
+# QUEUE AND PROCESS OWNERSHIP
+#
+# The mail_owner parameter specifies the owner of the Postfix queue
+# and of most Postfix daemon processes. Specify the name of a user
+# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
+# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
+# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
+# USER.
+#
+mail_owner = postfix
+
+# The default_privs parameter specifies the default rights used by
+# the local delivery agent for delivery to external file or command.
+# These rights are used in the absence of a recipient user context.
+# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
+#
+#default_privs = nobody
+
+# INTERNET HOST AND DOMAIN NAMES
+#
+# The myhostname parameter specifies the internet hostname of this
+# mail system. The default is to use the fully-qualified domain name
+# from gethostname(). $myhostname is used as a default value for many
+# other configuration parameters.
+#
+#myhostname = host.domain.tld
+#myhostname = virtual.domain.tld
+myhostname = bruni.home.brehm-online.com
+
+# The mydomain parameter specifies the local internet domain name.
+# The default is to use $myhostname minus the first component.
+# $mydomain is used as a default value for many other configuration
+# parameters.
+#
+#mydomain = domain.tld
+mydomain = home.brehm-online.com
+
+# SENDING MAIL
+#
+# The myorigin parameter specifies the domain that locally-posted
+# mail appears to come from. The default is to append $myhostname,
+# which is fine for small sites. If you run a domain with multiple
+# machines, you should (1) change this to $mydomain and (2) set up
+# a domain-wide alias database that aliases each user to
+# user@that.users.mailhost.
+#
+# For the sake of consistency between sender and recipient addresses,
+# myorigin also specifies the default domain name that is appended
+# to recipient addresses that have no @domain part.
+#
+#myorigin = $myhostname
+#myorigin = $mydomain
+myorigin = brehm-online.com
+
+# RECEIVING MAIL
+
+# The inet_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on. By default,
+# the software claims all active interfaces on the machine. The
+# parameter also controls delivery of mail to user@[ip.address].
+#
+# See also the proxy_interfaces parameter, for network addresses that
+# are forwarded to us via a proxy or network address translator.
+#
+# Note: you need to stop/start Postfix when this parameter changes.
+#
+#inet_interfaces = all
+#inet_interfaces = $myhostname
+#inet_interfaces = $myhostname, localhost
+inet_interfaces = 10.12.11.2, localhost
+
+# The proxy_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on by way of a
+# proxy or network address translation unit. This setting extends
+# the address list specified with the inet_interfaces parameter.
+#
+# You must specify your proxy/NAT addresses when your system is a
+# backup MX host for other domains, otherwise mail delivery loops
+# will happen when the primary MX host is down.
+#
+#proxy_interfaces =
+#proxy_interfaces = 1.2.3.4
+
+# The mydestination parameter specifies the list of domains that this
+# machine considers itself the final destination for.
+#
+# These domains are routed to the delivery agent specified with the
+# local_transport parameter setting. By default, that is the UNIX
+# compatible delivery agent that lookups all recipients in /etc/passwd
+# and /etc/aliases or their equivalent.
+#
+# The default is $myhostname + localhost.$mydomain. On a mail domain
+# gateway, you should also include $mydomain.
+#
+# Do not specify the names of virtual domains - those domains are
+# specified elsewhere (see VIRTUAL_README).
+#
+# Do not specify the names of domains that this machine is backup MX
+# host for. Specify those names via the relay_domains settings for
+# the SMTP server, or use permit_mx_backup if you are lazy (see
+# STANDARD_CONFIGURATION_README).
+#
+# The local machine is always the final destination for mail addressed
+# to user@[the.net.work.address] of an interface that the mail system
+# receives mail on (see the inet_interfaces parameter).
+#
+# Specify a list of host or domain names, /file/name or type:table
+# patterns, separated by commas and/or whitespace. A /file/name
+# pattern is replaced by its contents; a type:table is matched when
+# a name matches a lookup key (the right-hand side is ignored).
+# Continue long lines by starting the next line with whitespace.
+#
+# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
+#
+#mydestination = $myhostname, localhost.$mydomain, localhost
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
+# mail.$mydomain, www.$mydomain, ftp.$mydomain
+
+# REJECTING MAIL FOR UNKNOWN LOCAL USERS
+#
+# The local_recipient_maps parameter specifies optional lookup tables
+# with all names or addresses of users that are local with respect
+# to $mydestination, $inet_interfaces or $proxy_interfaces.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown local users. This parameter is defined by default.
+#
+# To turn off local recipient checking in the SMTP server, specify
+# local_recipient_maps = (i.e. empty).
+#
+# The default setting assumes that you use the default Postfix local
+# delivery agent for local delivery. You need to update the
+# local_recipient_maps setting if:
+#
+# - You define $mydestination domain recipients in files other than
+# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
+# For example, you define $mydestination domain recipients in
+# the $virtual_mailbox_maps files.
+#
+# - You redefine the local delivery agent in master.cf.
+#
+# - You redefine the "local_transport" setting in main.cf.
+#
+# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
+# feature of the Postfix local delivery agent (see local(8)).
+#
+# Details are described in the LOCAL_RECIPIENT_README file.
+#
+# Beware: if the Postfix SMTP server runs chrooted, you probably have
+# to access the passwd file via the proxymap service, in order to
+# overcome chroot restrictions. The alternative, having a copy of
+# the system passwd file in the chroot jail is just not practical.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify a bare username, an @domain.tld
+# wild-card, or specify a user@domain.tld address.
+#
+#local_recipient_maps = unix:passwd.byname $alias_maps
+#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
+#local_recipient_maps =
+
+# The unknown_local_recipient_reject_code specifies the SMTP server
+# response code when a recipient domain matches $mydestination or
+# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
+# and the recipient address or address local-part is not found.
+#
+# The default setting is 550 (reject mail) but it is safer to start
+# with 450 (try again later) until you are certain that your
+# local_recipient_maps settings are OK.
+#
+unknown_local_recipient_reject_code = 550
+
+# TRUST AND RELAY CONTROL
+
+# The mynetworks parameter specifies the list of "trusted" SMTP
+# clients that have more privileges than "strangers".
+#
+# In particular, "trusted" SMTP clients are allowed to relay mail
+# through Postfix. See the smtpd_recipient_restrictions parameter
+# in postconf(5).
+#
+# You can specify the list of "trusted" network addresses by hand
+# or you can let Postfix do it for you (which is the default).
+#
+# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
+# clients in the same IP subnetworks as the local machine.
+# On Linux, this does works correctly only with interfaces specified
+# with the "ifconfig" command.
+#
+# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
+# clients in the same IP class A/B/C networks as the local machine.
+# Don't do this with a dialup site - it would cause Postfix to "trust"
+# your entire provider's network. Instead, specify an explicit
+# mynetworks list by hand, as described below.
+#
+# Specify "mynetworks_style = host" when Postfix should "trust"
+# only the local machine.
+#
+#mynetworks_style = class
+#mynetworks_style = subnet
+#mynetworks_style = host
+
+# Alternatively, you can specify the mynetworks list by hand, in
+# which case Postfix ignores the mynetworks_style setting.
+#
+# Specify an explicit list of network/netmask patterns, where the
+# mask specifies the number of bits in the network part of a host
+# address.
+#
+# You can also specify the absolute pathname of a pattern file instead
+# of listing the patterns here. Specify type:table for table-based lookups
+# (the value on the table right-hand side is not used).
+#
+#mynetworks = 168.100.189.0/28, 127.0.0.0/8
+#mynetworks = $config_directory/mynetworks
+#mynetworks = hash:/etc/postfix/network_table
+mynetworks = 10.12.11.0/24
+
+# The relay_domains parameter restricts what destinations this system will
+# relay mail to. See the smtpd_recipient_restrictions description in
+# postconf(5) for detailed information.
+#
+# By default, Postfix relays mail
+# - from "trusted" clients (IP address matches $mynetworks) to any destination,
+# - from "untrusted" clients to destinations that match $relay_domains or
+# subdomains thereof, except addresses with sender-specified routing.
+# The default relay_domains value is $mydestination.
+#
+# In addition to the above, the Postfix SMTP server by default accepts mail
+# that Postfix is final destination for:
+# - destinations that match $inet_interfaces or $proxy_interfaces,
+# - destinations that match $mydestination
+# - destinations that match $virtual_alias_domains,
+# - destinations that match $virtual_mailbox_domains.
+# These destinations do not need to be listed in $relay_domains.
+#
+# Specify a list of hosts or domains, /file/name patterns or type:name
+# lookup tables, separated by commas and/or whitespace. Continue
+# long lines by starting the next line with whitespace. A file name
+# is replaced by its contents; a type:name table is matched when a
+# (parent) domain appears as lookup key.
+#
+# NOTE: Postfix will not automatically forward mail for domains that
+# list this system as their primary or backup MX host. See the
+# permit_mx_backup restriction description in postconf(5).
+#
+#relay_domains = $mydestination
+
+# INTERNET OR INTRANET
+
+# The relayhost parameter specifies the default host to send mail to
+# when no entry is matched in the optional transport(5) table. When
+# no relayhost is given, mail is routed directly to the destination.
+#
+# On an intranet, specify the organizational domain name. If your
+# internal DNS uses no MX records, specify the name of the intranet
+# gateway host instead.
+#
+# In the case of SMTP, specify a domain, host, host:port, [host]:port,
+# [address] or [address]:port; the form [host] turns off MX lookups.
+#
+# If you're connected via UUCP, see also the default_transport parameter.
+#
+#relayhost = $mydomain
+#relayhost = [gateway.my.domain]
+#relayhost = [mailserver.isp.tld]
+#relayhost = uucphost
+#relayhost = [an.ip.add.ress]
+
+# REJECTING UNKNOWN RELAY USERS
+#
+# The relay_recipient_maps parameter specifies optional lookup tables
+# with all addresses in the domains that match $relay_domains.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown relay users. This feature is off by default.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify an @domain.tld wild-card, or specify
+# a user@domain.tld address.
+#
+#relay_recipient_maps = hash:/etc/postfix/relay_recipients
+
+# INPUT RATE CONTROL
+#
+# The in_flow_delay configuration parameter implements mail input
+# flow control. This feature is turned on by default, although it
+# still needs further development (it's disabled on SCO UNIX due
+# to an SCO bug).
+#
+# A Postfix process will pause for $in_flow_delay seconds before
+# accepting a new message, when the message arrival rate exceeds the
+# message delivery rate. With the default 100 SMTP server process
+# limit, this limits the mail inflow to 100 messages a second more
+# than the number of messages delivered per second.
+#
+# Specify 0 to disable the feature. Valid delays are 0..10.
+#
+#in_flow_delay = 1s
+
+# ADDRESS REWRITING
+#
+# The ADDRESS_REWRITING_README document gives information about
+# address masquerading or other forms of address rewriting including
+# username->Firstname.Lastname mapping.
+
+# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
+#
+# The VIRTUAL_README document gives information about the many forms
+# of domain hosting that Postfix supports.
+
+# "USER HAS MOVED" BOUNCE MESSAGES
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# TRANSPORT MAP
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# ALIAS DATABASE
+#
+# The alias_maps parameter specifies the list of alias databases used
+# by the local delivery agent. The default list is system dependent.
+#
+# On systems with NIS, the default is to search the local alias
+# database, then the NIS alias database. See aliases(5) for syntax
+# details.
+#
+# If you change the alias database, run "postalias /etc/aliases" (or
+# wherever your system stores the mail alias file), or simply run
+# "newaliases" to build the necessary DBM or DB file.
+#
+# It will take a minute or so before changes become visible. Use
+# "postfix reload" to eliminate the delay.
+#
+#alias_maps = dbm:/etc/aliases
+#alias_maps = hash:/etc/aliases
+#alias_maps = hash:/etc/aliases, nis:mail.aliases
+#alias_maps = netinfo:/aliases
+
+# The alias_database parameter specifies the alias database(s) that
+# are built with "newaliases" or "sendmail -bi". This is a separate
+# configuration parameter, because alias_maps (see above) may specify
+# tables that are not necessarily all under control by Postfix.
+#
+#alias_database = dbm:/etc/aliases
+#alias_database = dbm:/etc/mail/aliases
+#alias_database = hash:/etc/aliases
+#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
+
+# ADDRESS EXTENSIONS (e.g., user+foo)
+#
+# The recipient_delimiter parameter specifies the separator between
+# user names and address extensions (user+foo). See canonical(5),
+# local(8), relocated(5) and virtual(5) for the effects this has on
+# aliases, canonical, virtual, relocated and .forward file lookups.
+# Basically, the software tries user+foo and .forward+foo before
+# trying user and .forward.
+#
+#recipient_delimiter = +
+
+# DELIVERY TO MAILBOX
+#
+# The home_mailbox parameter specifies the optional pathname of a
+# mailbox file relative to a user's home directory. The default
+# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
+# "Maildir/" for qmail-style delivery (the / is required).
+#
+#home_mailbox = Mailbox
+#home_mailbox = Maildir/
+
+# The mail_spool_directory parameter specifies the directory where
+# UNIX-style mailboxes are kept. The default setting depends on the
+# system type.
+#
+#mail_spool_directory = /var/mail
+#mail_spool_directory = /var/spool/mail
+
+# The mailbox_command parameter specifies the optional external
+# command to use instead of mailbox delivery. The command is run as
+# the recipient with proper HOME, SHELL and LOGNAME environment settings.
+# Exception: delivery for root is done as $default_user.
+#
+# Other environment variables of interest: USER (recipient username),
+# EXTENSION (address extension), DOMAIN (domain part of address),
+# and LOCAL (the address localpart).
+#
+# Unlike other Postfix configuration parameters, the mailbox_command
+# parameter is not subjected to $parameter substitutions. This is to
+# make it easier to specify shell syntax (see example below).
+#
+# Avoid shell meta characters because they will force Postfix to run
+# an expensive shell process. Procmail alone is expensive enough.
+#
+# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
+# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
+#
+#mailbox_command = /some/where/procmail
+#mailbox_command = /some/where/procmail -a "$EXTENSION"
+
+# The mailbox_transport specifies the optional transport in master.cf
+# to use after processing aliases and .forward files. This parameter
+# has precedence over the mailbox_command, fallback_transport and
+# luser_relay parameters.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#mailbox_transport = lmtp:unix:/file/name
+#mailbox_transport = cyrus
+
+# The fallback_transport specifies the optional transport in master.cf
+# to use for recipients that are not found in the UNIX passwd database.
+# This parameter has precedence over the luser_relay parameter.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#fallback_transport = lmtp:unix:/file/name
+#fallback_transport = cyrus
+#fallback_transport =
+
+# The luser_relay parameter specifies an optional destination address
+# for unknown recipients. By default, mail for unknown@$mydestination,
+# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
+# as undeliverable.
+#
+# The following expansions are done on luser_relay: $user (recipient
+# username), $shell (recipient shell), $home (recipient home directory),
+# $recipient (full recipient address), $extension (recipient address
+# extension), $domain (recipient domain), $local (entire recipient
+# localpart), $recipient_delimiter. Specify ${name?value} or
+# ${name:value} to expand value only when $name does (does not) exist.
+#
+# luser_relay works only for the default Postfix local delivery agent.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must specify "local_recipient_maps =" (i.e. empty) in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#luser_relay = $user@other.host
+#luser_relay = $local@other.host
+#luser_relay = admin+$local
+
+# JUNK MAIL CONTROLS
+#
+# The controls listed here are only a very small subset. The file
+# SMTPD_ACCESS_README provides an overview.
+
+# The header_checks parameter specifies an optional table with patterns
+# that each logical message header is matched against, including
+# headers that span multiple physical lines.
+#
+# By default, these patterns also apply to MIME headers and to the
+# headers of attached messages. With older Postfix versions, MIME and
+# attached message headers were treated as body text.
+#
+# For details, see "man header_checks".
+#
+#header_checks = regexp:/etc/postfix/header_checks
+
+# FAST ETRN SERVICE
+#
+# Postfix maintains per-destination logfiles with information about
+# deferred mail, so that mail can be flushed quickly with the SMTP
+# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
+# See the ETRN_README document for a detailed description.
+#
+# The fast_flush_domains parameter controls what destinations are
+# eligible for this service. By default, they are all domains that
+# this server is willing to relay mail to.
+#
+#fast_flush_domains = $relay_domains
+
+# SHOW SOFTWARE VERSION OR NOT
+#
+# The smtpd_banner parameter specifies the text that follows the 220
+# code in the SMTP server's greeting banner. Some people like to see
+# the mail version advertised. By default, Postfix shows no version.
+#
+# You MUST specify $myhostname at the start of the text. That is an
+# RFC requirement. Postfix itself does not care.
+#
+#smtpd_banner = $myhostname ESMTP $mail_name
+#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
+
+# PARALLEL DELIVERY TO THE SAME DESTINATION
+#
+# How many parallel deliveries to the same user or domain? With local
+# delivery, it does not make sense to do massively parallel delivery
+# to the same user, because mailbox updates must happen sequentially,
+# and expensive pipelines in .forward files can cause disasters when
+# too many are run at the same time. With SMTP deliveries, 10
+# simultaneous connections to the same domain could be sufficient to
+# raise eyebrows.
+#
+# Each message delivery transport has its XXX_destination_concurrency_limit
+# parameter. The default is $default_destination_concurrency_limit for
+# most delivery transports. For the local delivery agent the default is 2.
+
+#local_destination_concurrency_limit = 2
+#default_destination_concurrency_limit = 20
+
+# DEBUGGING CONTROL
+#
+# The debug_peer_level parameter specifies the increment in verbose
+# logging level when an SMTP client or server host name or address
+# matches a pattern in the debug_peer_list parameter.
+#
+debug_peer_level = 2
+
+# The debug_peer_list parameter specifies an optional list of domain
+# or network patterns, /file/name patterns or type:name tables. When
+# an SMTP client or server host name or address matches a pattern,
+# increase the verbose logging level by the amount specified in the
+# debug_peer_level parameter.
+#
+#debug_peer_list = 127.0.0.1
+#debug_peer_list = some.domain
+
+# The debugger_command specifies the external command that is executed
+# when a Postfix daemon program is run with the -D option.
+#
+# Use "command .. & sleep 5" so that the debugger can attach before
+# the process marches on. If you use an X-based debugger, be sure to
+# set up your XAUTHORITY environment variable before starting Postfix.
+#
+debugger_command =
+ PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
+ ddd $daemon_directory/$process_name $process_id & sleep 5
+
+# If you can't use X, use this to capture the call stack when a
+# daemon crashes. The result is in a file in the configuration
+# directory, and is named after the process name and the process ID.
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
+# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
+# >$config_directory/$process_name.$process_id.log & sleep 5
+#
+# Another possibility is to run gdb under a detached screen session.
+# To attach to the screen sesssion, su root and run "screen -r
+# <id_string>" where <id_string> uniquely matches one of the detached
+# sessions (from "screen -list").
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
+# -dmS $process_name gdb $daemon_directory/$process_name
+# $process_id & sleep 1
+
+# INSTALL-TIME CONFIGURATION INFORMATION
+#
+# The following parameters are used when installing a new Postfix version.
+#
+# sendmail_path: The full pathname of the Postfix sendmail command.
+# This is the Sendmail-compatible mail posting interface.
+#
+sendmail_path = /usr/sbin/sendmail
+
+# newaliases_path: The full pathname of the Postfix newaliases command.
+# This is the Sendmail-compatible command to build alias databases.
+#
+newaliases_path = /usr/bin/newaliases
+
+# mailq_path: The full pathname of the Postfix mailq command. This
+# is the Sendmail-compatible mail queue listing command.
+#
+mailq_path = /usr/bin/mailq
+
+# setgid_group: The group for mail submission and queue management
+# commands. This must be a group name with a numerical group ID that
+# is not shared with other accounts, not even with the Postfix account.
+#
+setgid_group = postdrop
+
+# html_directory: The location of the Postfix HTML documentation.
+#
+html_directory = /usr/share/doc/postfix-2.8.7/html
+
+# manpage_directory: The location of the Postfix on-line manual pages.
+#
+manpage_directory = /usr/share/man
+
+# sample_directory: The location of the Postfix sample configuration files.
+# This parameter is obsolete as of Postfix 2.1.
+#
+sample_directory = /etc/postfix
+
+# readme_directory: The location of the Postfix README files.
+#
+readme_directory = /usr/share/doc/postfix-2.8.7/readme
+home_mailbox = .maildir/
+
+smtpd_sasl_auth_enable = yes
+smtpd_sasl2_auth_enable = yes
+smtpd_sasl_security_options = noanonymous
+broken_sasl_auth_clients = yes
+smtpd_sasl_local_domain = $myhostname
+
+# Authentifizierter Relay-Mail-Versand
+smtp_sasl_auth_enable = yes
+smtp_sasl_password_maps = hash:/etc/postfix/smtp_auth
+smtp_sasl_security_options = noanonymous
+relayhost = [mail.brehm-online.com]
+#relayhost = [helga-six.brehm-online.com]
+
+smtpd_use_tls = yes
+#smtpd_tls_auth_only = yes
+smtpd_tls_key_file = /etc/postfix/postfix.pem
+smtpd_tls_cert_file = /etc/postfix/postfix.pem
+#smtpd_tls_CAfile = /etc/ssl/acwain-CA/CAcert.pem
+smtpd_tls_loglevel = 1
+smtpd_tls_received_header = yes
+smtpd_tls_session_cache_timeout = 3600s
+tls_random_source = dev:/dev/urandom
+
+# schön tls verwenden
+smtp_use_tls = yes
+smtp_tls_key_file = /etc/postfix/postfix.pem
+smtp_tls_cert_file = /etc/postfix/postfix.pem
+#smtp_tls_CAfile = /etc/ssl/acwain-CA/CAcert.pem
+# vermurkste zertifikate: egal
+smtp_tls_enforce_peername = no
+
+#debug_peer_list = 217.237.40.156
+
+inet_protocols = all
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.4/html
+html_directory = /usr/share/doc/postfix-2.9.5/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.4/readme
+readme_directory = /usr/share/doc/postfix-2.9.5/readme
home_mailbox = .maildir/
-##VERSION: $Id: authdaemonrc.in 17 2011-04-04 02:07:37Z mrsam $
+##VERSION: $Id: authdaemonrc.in 239 2012-10-06 23:51:19Z mrsam $
#
# Copyright 2000-2005 Double Precision, Inc. See COPYING for
# distribution information.
# fit on one line. Do not use any additional whitespace for indentation,
# or anything else.
-##NAME: authmodulelist:2
+##NAME: authmodulelist:3
#
# The authentication modules that are linked into authdaemond. The
# default list is installed. You may selectively disable modules simply
# by removing them from the following list. The available modules you
-# can use are: authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe
+# can use are: authuserdb authpam authshadow authpgsql authldap authmysql authsqlite authcustom authpipe
-authmodulelist="authmysql "
+authmodulelist="authmysql authpgsql authsqlite authldap authpam authuserdb authshadow authcustom authpipe"
-##NAME: authmodulelistorig:3
+##NAME: authmodulelistorig:4
#
# This setting is used by Courier's webadmin module, and should be left
# alone
-authmodulelistorig="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe"
+authmodulelistorig="authuserdb authpam authshadow authpgsql authldap authmysql authsqlite authcustom authpipe"
##NAME: daemons:0
#
-##VERSION: $Id: authdaemonrc.in 17 2011-04-04 02:07:37Z mrsam $
+##VERSION: $Id: authdaemonrc.in 239 2012-10-06 23:51:19Z mrsam $
#
# Copyright 2000-2005 Double Precision, Inc. See COPYING for
# distribution information.
# fit on one line. Do not use any additional whitespace for indentation,
# or anything else.
-##NAME: authmodulelist:2
+##NAME: authmodulelist:3
#
# The authentication modules that are linked into authdaemond. The
# default list is installed. You may selectively disable modules simply
# by removing them from the following list. The available modules you
-# can use are: authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe
+# can use are: authuserdb authpam authshadow authpgsql authldap authmysql authsqlite authcustom authpipe
-authmodulelist="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe"
+authmodulelist="authuserdb authpam authshadow authpgsql authldap authmysql authsqlite authcustom authpipe"
-##NAME: authmodulelistorig:3
+##NAME: authmodulelistorig:4
#
# This setting is used by Courier's webadmin module, and should be left
# alone
-authmodulelistorig="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe"
+authmodulelistorig="authuserdb authpam authshadow authpgsql authldap authmysql authsqlite authcustom authpipe"
##NAME: daemons:0
#
--- /dev/null
+##VERSION: $Id: authsqliterc 17 2011-04-04 02:07:37Z mrsam $
+#
+# Copyright 2012 Double Precision, Inc. See COPYING for
+# distribution information.
+#
+# Do not alter lines that begin with ##, they are used when upgrading
+# this configuration.
+#
+# authsqliterc created from authsqliterc.dist by sysconftool
+#
+# Each line in this file must follow the following format:
+#
+# field[spaces|tabs]value
+#
+# That is, the name of the field, followed by spaces or tabs, followed by
+# field value. Trailing spaces are prohibited.
+
+
+##NAME: LOCATION:0
+#
+# The SQLite database. You must create this database beforehand, and create
+# the users table, as defined below.
+
+SQLITE_DATABASE /var/users.db
+
+##NAME: SQLITE_USER_TABLE:0
+#
+# Suggested format of the table specified by SQLITE_USER_TABLE:
+#
+# CREATE TABLE passwd (
+# id text not null primary key,
+# crypt text, # Either...
+# clear text, # ... or
+# name text,
+# uid int,
+# gid int,
+# home text not null,
+# maildir text,
+# defaultdelivery text,
+# quota text,
+# options text);
+#
+# Use either crypt or clear, to specify whether cleartext or crypted passwords
+# get used (and define either SQLITE_CRYPT_PWFIELD or SQLITE_CLEAR_PWFIELD,
+# below, accordingly).
+
+SQLITE_USER_TABLE passwd
+
+##NAME: SQLITE_CRYPT_PWFIELD:0
+#
+# Either SQLITE_CRYPT_PWFIELD or SQLITE_CLEAR_PWFIELD must be defined. Both
+# are OK too. crypted passwords go into SQLITE_CRYPT_PWFIELD, cleartext
+# passwords go into SQLITE_CLEAR_PWFIELD. Cleartext passwords allow
+# CRAM-MD5 authentication to be implemented.
+
+SQLITE_CRYPT_PWFIELD crypt
+
+##NAME: SQLITE_CLEAR_PWFIELD:0
+#
+#
+# SQLITE_CLEAR_PWFIELD clear
+
+##NAME: SQLITE_DEFAULT_DOMAIN:0
+#
+# If DEFAULT_DOMAIN is defined, and someone tries to log in as 'user',
+# we will search for 'user@DEFAULT_DOMAIN' instead.
+#
+#
+# DEFAULT_DOMAIN example.com
+
+##NAME: SQLITE_UID_FIELD:0
+#
+# Other fields in the sqlite table:
+#
+# SQLITE_UID_FIELD - contains the numerical userid of the account
+#
+SQLITE_UID_FIELD uid
+
+##NAME: SQLITE_GID_FIELD:0
+#
+# Numerical groupid of the account
+
+SQLITE_GID_FIELD gid
+
+##NAME: SQLITE_LOGIN_FIELD:0
+#
+# The login id, default is id. Basically the query is:
+#
+# SELECT SQLITE_UID_FIELD, SQLITE_GID_FIELD, ... WHERE id='loginid'
+#
+
+SQLITE_LOGIN_FIELD id
+
+##NAME: SQLITE_HOME_FIELD:0
+#
+
+SQLITE_HOME_FIELD home
+
+##NAME: SQLITE_NAME_FIELD:0
+#
+# The user's name (optional)
+
+SQLITE_NAME_FIELD name
+
+##NAME: SQLITE_MAILDIR_FIELD:0
+#
+# This is an optional field, and can be used to specify an arbitrary
+# location of the maildir for the account, which normally defaults to
+# $HOME/Maildir (where $HOME is read from SQLITE_HOME_FIELD).
+#
+# You still need to provide a SQLITE_HOME_FIELD, even if you uncomment this
+# out.
+#
+# SQLITE_MAILDIR_FIELD maildir
+
+##NAME: SQLITE_DEFAULTDELIVERY:0
+#
+# Courier mail server only: optional field specifies custom mail delivery
+# instructions for this account (if defined) -- essentially overrides
+# DEFAULTDELIVERY from ${sysconfdir}/courierd
+#
+# SQLITE_DEFAULTDELIVERY defaultdelivery
+
+##NAME: SQLITE_QUOTA_FIELD:0
+#
+# Define SQLITE_QUOTA_FIELD to be the name of the field that can optionally
+# specify a maildir quota. See README.maildirquota for more information
+#
+# SQLITE_QUOTA_FIELD quota
+
+##NAME: SQLITE_AUXOPTIONS:0
+#
+# Auxiliary options. The SQLITE_AUXOPTIONS field should be a char field that
+# contains a single string consisting of comma-separated "ATTRIBUTE=NAME"
+# pairs. These names are additional attributes that define various per-account
+# "options", as given in INSTALL's description of the "Account OPTIONS"
+# setting.
+#
+# SQLITE_AUXOPTIONS_FIELD options
+#
+# You might want to try something like this, if you'd like to use a bunch
+# of individual fields, instead of a single text blob:
+#
+# SQLITE_AUXOPTIONS_FIELD "disableimap=" || disableimap || ",disablepop3=" || disablepop3 || ",disablewebmail=" || disablewebmail || ",sharedgroup=" || sharedgroup
+#
+# This will let you define fields called "disableimap", etc, with the end result
+# being something that the OPTIONS parser understands.
+
+
+##NAME: SQLITE_WHERE_CLAUSE:0
+#
+# This is optional, SQLITE_WHERE_CLAUSE can be basically set to an arbitrary
+# fixed string that is appended to the WHERE clause of our query
+#
+# SQLITE_WHERE_CLAUSE server='mailhost.example.com'
+
+##NAME: SQLITE_SELECT_CLAUSE:0
+#
+# This is optional, SQLITE_SELECT_CLAUSE can be set when you have a database,
+# which is structuraly different from the proposed layout. The fixed string will
+# be used to do a SELECT operation on database, which should return fields
+# in order specified bellow:
+#
+# username, cryptpw, clearpw, uid, gid, home, maildir, quota, fullname, options
+#
+# The username field should include the domain (see example below).
+#
+# Enabling this option causes ignorance of any other field-related
+# options, excluding default domain.
+#
+# There are two variables, which you can use. Substitution will be made
+# for them, so you can put entered username (local part) and domain name
+# in the right place of your query. These variables are:
+# $(local_part), $(domain), $(service)
+#
+# If a $(domain) is empty (not given by the remote user) the default domain
+# name is used in its place.
+#
+# $(service) will expand out to the service being authenticated: imap, imaps,
+# pop3 or pop3s. Courier mail server only: service will also expand out to
+# "courier", when searching for local mail account's location. In this case,
+# if the "maildir" field is not empty it will be used in place of
+# DEFAULTDELIVERY. Courier mail server will also use esmtp when doing
+# authenticated ESMTP.
+#
+# For example:
+#
+# SQLITE_SELECT_CLAUSE SELECT popbox.local_part || '@' || popbox.domain_name,\
+# '{MD5}' || popbox.password_hash), \
+# popbox.clearpw, \
+# domain.uid, \
+# domain.gid, \
+# domain.path || '/' || popbox.mbox_name, \
+# '', \
+# domain.quota, \
+# '', \
+# "disableimap=" || disableimap || ",disablepop3=" || \
+# disablepop3 || ",disablewebmail=" || disablewebmail || \
+# ",sharedgroup=" || sharedgroup \
+# FROM popbox, domain \
+# WHERE popbox.local_part = '$(local_part)' \
+# AND popbox.domain_name = '$(domain)' \
+# AND popbox.domain_name = domain.domain_name
+
+
+##NAME: SQLITE_ENUMERATE_CLAUSE:1
+#
+# Optional custom SQL query used to enumerate accounts for authenumerate,
+# in order to compile a list of accounts for shared folders. The query
+# should return the following fields: name, uid, gid, homedir, maildir, options
+#
+# Example:
+# SQLITE_ENUMERATE_CLAUSE SELECT popbox.local_part || '@' || popbox.domain_name, \
+# domain.uid, \
+# domain.gid, \
+# domain.path || '/' || popbox.mbox_name, \
+# '', \
+# 'sharedgroup=' || sharedgroup \
+# FROM popbox, domain \
+# WHERE popbox.local_part = '$(local_part)' \
+# AND popbox.domain_name = '$(domain)' \
+# AND popbox.domain_name = domain.domain_name
+
+
+##NAME: SQLITE_CHPASS_CLAUSE:0
+#
+# This is optional, SQLITE_CHPASS_CLAUSE can be set when you have a database,
+# which is structuraly different from proposed. The fixed string will
+# be used to do an UPDATE operation on database. In other words, it is
+# used, when changing passwords. This is used by sqwebmail/Courier webmail.
+#
+# There are four variables, which you can use. Substitution will be made
+# for them, so you can put entered username (local part) and domain name
+# in the right place of your query. There variables are:
+# $(local_part) , $(domain) , $(newpass) , $(newpass_crypt)
+#
+# If a $(domain) is empty (not given by the remote user) the default domain
+# name is used in its place.
+# $(newpass) contains plain password
+# $(newpass_crypt) contains its crypted form
+#
+# SQLITE_CHPASS_CLAUSE UPDATE popbox \
+# SET clearpw='$(newpass)', \
+# password_hash='$(newpass_crypt)' \
+# WHERE local_part='$(local_part)' \
+# AND domain_name='$(domain)'
+#
--- /dev/null
+##VERSION: $Id: authsqliterc 17 2011-04-04 02:07:37Z mrsam $
+#
+# Copyright 2012 Double Precision, Inc. See COPYING for
+# distribution information.
+#
+# Do not alter lines that begin with ##, they are used when upgrading
+# this configuration.
+#
+# authsqliterc created from authsqliterc.dist by sysconftool
+#
+# Each line in this file must follow the following format:
+#
+# field[spaces|tabs]value
+#
+# That is, the name of the field, followed by spaces or tabs, followed by
+# field value. Trailing spaces are prohibited.
+
+
+##NAME: LOCATION:0
+#
+# The SQLite database. You must create this database beforehand, and create
+# the users table, as defined below.
+
+SQLITE_DATABASE /var/users.db
+
+##NAME: SQLITE_USER_TABLE:0
+#
+# Suggested format of the table specified by SQLITE_USER_TABLE:
+#
+# CREATE TABLE passwd (
+# id text not null primary key,
+# crypt text, # Either...
+# clear text, # ... or
+# name text,
+# uid int,
+# gid int,
+# home text not null,
+# maildir text,
+# defaultdelivery text,
+# quota text,
+# options text);
+#
+# Use either crypt or clear, to specify whether cleartext or crypted passwords
+# get used (and define either SQLITE_CRYPT_PWFIELD or SQLITE_CLEAR_PWFIELD,
+# below, accordingly).
+
+SQLITE_USER_TABLE passwd
+
+##NAME: SQLITE_CRYPT_PWFIELD:0
+#
+# Either SQLITE_CRYPT_PWFIELD or SQLITE_CLEAR_PWFIELD must be defined. Both
+# are OK too. crypted passwords go into SQLITE_CRYPT_PWFIELD, cleartext
+# passwords go into SQLITE_CLEAR_PWFIELD. Cleartext passwords allow
+# CRAM-MD5 authentication to be implemented.
+
+SQLITE_CRYPT_PWFIELD crypt
+
+##NAME: SQLITE_CLEAR_PWFIELD:0
+#
+#
+# SQLITE_CLEAR_PWFIELD clear
+
+##NAME: SQLITE_DEFAULT_DOMAIN:0
+#
+# If DEFAULT_DOMAIN is defined, and someone tries to log in as 'user',
+# we will search for 'user@DEFAULT_DOMAIN' instead.
+#
+#
+# DEFAULT_DOMAIN example.com
+
+##NAME: SQLITE_UID_FIELD:0
+#
+# Other fields in the sqlite table:
+#
+# SQLITE_UID_FIELD - contains the numerical userid of the account
+#
+SQLITE_UID_FIELD uid
+
+##NAME: SQLITE_GID_FIELD:0
+#
+# Numerical groupid of the account
+
+SQLITE_GID_FIELD gid
+
+##NAME: SQLITE_LOGIN_FIELD:0
+#
+# The login id, default is id. Basically the query is:
+#
+# SELECT SQLITE_UID_FIELD, SQLITE_GID_FIELD, ... WHERE id='loginid'
+#
+
+SQLITE_LOGIN_FIELD id
+
+##NAME: SQLITE_HOME_FIELD:0
+#
+
+SQLITE_HOME_FIELD home
+
+##NAME: SQLITE_NAME_FIELD:0
+#
+# The user's name (optional)
+
+SQLITE_NAME_FIELD name
+
+##NAME: SQLITE_MAILDIR_FIELD:0
+#
+# This is an optional field, and can be used to specify an arbitrary
+# location of the maildir for the account, which normally defaults to
+# $HOME/Maildir (where $HOME is read from SQLITE_HOME_FIELD).
+#
+# You still need to provide a SQLITE_HOME_FIELD, even if you uncomment this
+# out.
+#
+# SQLITE_MAILDIR_FIELD maildir
+
+##NAME: SQLITE_DEFAULTDELIVERY:0
+#
+# Courier mail server only: optional field specifies custom mail delivery
+# instructions for this account (if defined) -- essentially overrides
+# DEFAULTDELIVERY from ${sysconfdir}/courierd
+#
+# SQLITE_DEFAULTDELIVERY defaultdelivery
+
+##NAME: SQLITE_QUOTA_FIELD:0
+#
+# Define SQLITE_QUOTA_FIELD to be the name of the field that can optionally
+# specify a maildir quota. See README.maildirquota for more information
+#
+# SQLITE_QUOTA_FIELD quota
+
+##NAME: SQLITE_AUXOPTIONS:0
+#
+# Auxiliary options. The SQLITE_AUXOPTIONS field should be a char field that
+# contains a single string consisting of comma-separated "ATTRIBUTE=NAME"
+# pairs. These names are additional attributes that define various per-account
+# "options", as given in INSTALL's description of the "Account OPTIONS"
+# setting.
+#
+# SQLITE_AUXOPTIONS_FIELD options
+#
+# You might want to try something like this, if you'd like to use a bunch
+# of individual fields, instead of a single text blob:
+#
+# SQLITE_AUXOPTIONS_FIELD "disableimap=" || disableimap || ",disablepop3=" || disablepop3 || ",disablewebmail=" || disablewebmail || ",sharedgroup=" || sharedgroup
+#
+# This will let you define fields called "disableimap", etc, with the end result
+# being something that the OPTIONS parser understands.
+
+
+##NAME: SQLITE_WHERE_CLAUSE:0
+#
+# This is optional, SQLITE_WHERE_CLAUSE can be basically set to an arbitrary
+# fixed string that is appended to the WHERE clause of our query
+#
+# SQLITE_WHERE_CLAUSE server='mailhost.example.com'
+
+##NAME: SQLITE_SELECT_CLAUSE:0
+#
+# This is optional, SQLITE_SELECT_CLAUSE can be set when you have a database,
+# which is structuraly different from the proposed layout. The fixed string will
+# be used to do a SELECT operation on database, which should return fields
+# in order specified bellow:
+#
+# username, cryptpw, clearpw, uid, gid, home, maildir, quota, fullname, options
+#
+# The username field should include the domain (see example below).
+#
+# Enabling this option causes ignorance of any other field-related
+# options, excluding default domain.
+#
+# There are two variables, which you can use. Substitution will be made
+# for them, so you can put entered username (local part) and domain name
+# in the right place of your query. These variables are:
+# $(local_part), $(domain), $(service)
+#
+# If a $(domain) is empty (not given by the remote user) the default domain
+# name is used in its place.
+#
+# $(service) will expand out to the service being authenticated: imap, imaps,
+# pop3 or pop3s. Courier mail server only: service will also expand out to
+# "courier", when searching for local mail account's location. In this case,
+# if the "maildir" field is not empty it will be used in place of
+# DEFAULTDELIVERY. Courier mail server will also use esmtp when doing
+# authenticated ESMTP.
+#
+# For example:
+#
+# SQLITE_SELECT_CLAUSE SELECT popbox.local_part || '@' || popbox.domain_name,\
+# '{MD5}' || popbox.password_hash), \
+# popbox.clearpw, \
+# domain.uid, \
+# domain.gid, \
+# domain.path || '/' || popbox.mbox_name, \
+# '', \
+# domain.quota, \
+# '', \
+# "disableimap=" || disableimap || ",disablepop3=" || \
+# disablepop3 || ",disablewebmail=" || disablewebmail || \
+# ",sharedgroup=" || sharedgroup \
+# FROM popbox, domain \
+# WHERE popbox.local_part = '$(local_part)' \
+# AND popbox.domain_name = '$(domain)' \
+# AND popbox.domain_name = domain.domain_name
+
+
+##NAME: SQLITE_ENUMERATE_CLAUSE:1
+#
+# Optional custom SQL query used to enumerate accounts for authenumerate,
+# in order to compile a list of accounts for shared folders. The query
+# should return the following fields: name, uid, gid, homedir, maildir, options
+#
+# Example:
+# SQLITE_ENUMERATE_CLAUSE SELECT popbox.local_part || '@' || popbox.domain_name, \
+# domain.uid, \
+# domain.gid, \
+# domain.path || '/' || popbox.mbox_name, \
+# '', \
+# 'sharedgroup=' || sharedgroup \
+# FROM popbox, domain \
+# WHERE popbox.local_part = '$(local_part)' \
+# AND popbox.domain_name = '$(domain)' \
+# AND popbox.domain_name = domain.domain_name
+
+
+##NAME: SQLITE_CHPASS_CLAUSE:0
+#
+# This is optional, SQLITE_CHPASS_CLAUSE can be set when you have a database,
+# which is structuraly different from proposed. The fixed string will
+# be used to do an UPDATE operation on database. In other words, it is
+# used, when changing passwords. This is used by sqwebmail/Courier webmail.
+#
+# There are four variables, which you can use. Substitution will be made
+# for them, so you can put entered username (local part) and domain name
+# in the right place of your query. There variables are:
+# $(local_part) , $(domain) , $(newpass) , $(newpass_crypt)
+#
+# If a $(domain) is empty (not given by the remote user) the default domain
+# name is used in its place.
+# $(newpass) contains plain password
+# $(newpass_crypt) contains its crypted form
+#
+# SQLITE_CHPASS_CLAUSE UPDATE popbox \
+# SET clearpw='$(newpass)', \
+# password_hash='$(newpass_crypt)' \
+# WHERE local_part='$(local_part)' \
+# AND domain_name='$(domain)'
+#
setenv ANT_HOME '/usr/share/ant'
setenv CONFIG_PROTECT '/usr/share/gnupg/qualified.txt /var/lib/hsqldb /usr/share/config /usr/share/openvpn/easy-rsa'
-setenv CONFIG_PROTECT_MASK '/etc/gentoo-release /etc/sandbox.d /etc/env.d/java/ /etc/php/cli-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/apache2-php5.3/ext-active/ /etc/php/cli-php5.4/ext-active/ /etc/php/cgi-php5.4/ext-active/ /etc/php/apache2-php5.4/ext-active/ /etc/fonts/fonts.conf ${EPREFIX}/etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
+setenv CONFIG_PROTECT_MASK '/etc/gentoo-release /etc/sandbox.d /etc/php/cli-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/apache2-php5.3/ext-active/ /etc/php/cli-php5.4/ext-active/ /etc/php/cgi-php5.4/ext-active/ /etc/php/apache2-php5.4/ext-active/ /etc/fonts/fonts.conf ${EPREFIX}/etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
setenv EDITOR '/usr/bin/vim'
setenv FLTK_DOCDIR '/usr/share/doc/fltk-1.3.0-r1/html'
setenv GCC_SPECS ''
setenv GDK_USE_XFT '1'
setenv GSETTINGS_BACKEND 'dconf'
setenv HG '/usr/bin/hg'
-setenv INFOPATH '/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/info'
+setenv INFOPATH '/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/info'
setenv JAVACC_HOME '/usr/share/javacc/'
setenv LANG 'de_DE.UTF-8'
setenv LC_ADDRESS 'de_DE.utf8'
setenv LESS '-R -M --shift 5'
setenv LESSOPEN '|lesspipe %s'
setenv LIBBLURAY_CP '/usr/share/libbluray/lib/libbluray.jar'
-setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man:/etc/java-config/system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.2/man/'
+setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.2/man/'
setenv MULTIOSDIRS '../lib64:../lib32'
setenv OPENGL_PROFILE 'xorg-x11'
setenv PAGER '/usr/bin/less'
-setenv PATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.4:/usr/lib64/subversion/bin:/usr/games/bin'
+setenv PATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.6.3:/usr/lib64/subversion/bin:/usr/games/bin'
setenv PRELINK_PATH_MASK '/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so:/opt/bin/skype'
setenv PYTHONDOCS_2_7 '/usr/share/doc/python-docs-2.7.2/html/library'
setenv PYTHONDOCS_3_2 '/usr/share/doc/python-docs-3.2.2/html/library'
setenv PYTHONPATH '/usr/lib/portage/pym'
setenv QT_GRAPHICSSYSTEM 'raster'
setenv QT_PLUGIN_PATH '/usr/lib64/kde4/plugins'
-setenv ROOTPATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.4:/usr/lib64/subversion/bin'
+setenv ROOTPATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.6.3:/usr/lib64/subversion/bin'
setenv RUBYOPT '-rauto_gem'
setenv R_HOME '/usr/lib64/R'
-setenv SANE_CONFIG_DIR '/etc/sane.d'
-setenv USB_DEVFS_PATH '/dev/bus/usb'
setenv VBOX_APP_HOME '/usr/lib64/virtualbox'
setenv XDG_CONFIG_DIRS '/etc/xdg'
setenv XDG_DATA_DIRS '/usr/local/share:/usr/share:/usr/share/gdm'
# Printer configuration file for CUPS v1.5.2
-# Written by cupsd on 2013-01-08 18:44
+# Written by cupsd on 2013-01-29 21:28
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer Virtual_Printer>
UUID urn:uuid:7ae9b14e-20ad-3628-427d-870cdf4cdea4
send_interface="org.freedesktop.NetworkManager.Connection.Active"/>
<allow send_destination="org.freedesktop.NetworkManager"
- send_interface="org.freedesktop.NetworkManager.Device.Cdma"/>
+ send_interface="org.freedesktop.NetworkManager.Device.Modem"/>
<allow send_destination="org.freedesktop.NetworkManager"
send_interface="org.freedesktop.NetworkManager.Device.Wired"/>
- <allow send_destination="org.freedesktop.NetworkManager"
- send_interface="org.freedesktop.NetworkManager.Device.Gsm"/>
-
<allow send_destination="org.freedesktop.NetworkManager"
send_interface="org.freedesktop.NetworkManager.Device.Serial"/>
send_interface="org.freedesktop.NetworkManager"
send_member="wake"/>
</policy>
-
- <limit name="max_replies_per_connection">512</limit>
</busconfig>
-PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.4"
-ROOTPATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.4"
+PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.6.3"
+ROOTPATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.6.3"
GCC_SPECS=""
-MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/man"
-INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/info"
+MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/man"
+INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/info"
MULTIOSDIRS="../lib64:../lib32"
-MANPATH=/etc/java-config/system-vm/man/
-CONFIG_PROTECT_MASK="/etc/env.d/java/"
+MANPATH="/etc/java-config-2/current-system-vm/man/"
+++ /dev/null
-USB_DEVFS_PATH=/dev/bus/usb
-SANE_CONFIG_DIR=/etc/sane.d
-x86_64-pc-linux-gnu-4.5.4
\ No newline at end of file
+x86_64-pc-linux-gnu-4.6.3
\ No newline at end of file
-CURRENT=x86_64-pc-linux-gnu-4.5.4
+CURRENT=x86_64-pc-linux-gnu-4.6.3
+++ /dev/null
-LDPATH="/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.4:/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.4/32"
-MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/man"
-INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/info"
-STDCXX_INCDIR="g++-v4"
-CTARGET="x86_64-pc-linux-gnu"
-GCC_SPECS=""
-MULTIOSDIRS="../lib64:../lib32"
-GCC_PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.4"
--- /dev/null
+LDPATH="/usr/lib/gcc/x86_64-pc-linux-gnu/4.6.3:/usr/lib/gcc/x86_64-pc-linux-gnu/4.6.3/32"
+MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/man"
+INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/info"
+STDCXX_INCDIR="g++-v4"
+CTARGET="x86_64-pc-linux-gnu"
+GCC_SPECS=""
+MULTIOSDIRS="../lib64:../lib32"
+GCC_PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.6.3"
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+ <include ignore_missing="yes">infinality/infinality.conf</include>
+</fontconfig>
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE fontconfig SYSTEM "../fonts.dtd">
+<fontconfig>
+ <alias>
+ <family>sans-serif</family>
+ <prefer>
+ <family>Arimo</family>
+ </prefer>
+ </alias>
+ <alias>
+ <family>Arimo</family>
+ <default>
+ <family>sans-serif</family>
+ </default>
+ </alias>
+ <alias binding="same">
+ <family>Liberation Sans</family>
+ <accept>
+ <family>Arimo</family>
+ </accept>
+ </alias>
+ <alias binding="same">
+ <family>Arimo</family>
+ <default>
+ <family>Liberation Sans</family>
+ </default>
+ </alias>
+ <alias binding="same">
+ <family>Arial</family>
+ <accept>
+ <family>Arimo</family>
+ </accept>
+ </alias>
+ <alias binding="same">
+ <family>Arimo</family>
+ <default>
+ <family>Arial</family>
+ </default>
+ </alias>
+</fontconfig>
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE fontconfig SYSTEM "../fonts.dtd">
+<fontconfig>
+ <alias>
+ <family>monospace</family>
+ <prefer>
+ <family>Cousine</family>
+ </prefer>
+ </alias>
+ <alias>
+ <family>Cousine</family>
+ <default>
+ <family>monospace</family>
+ </default>
+ </alias>
+ <alias binding="same">
+ <family>Liberation Mono</family>
+ <accept>
+ <family>Cousine</family>
+ </accept>
+ </alias>
+ <alias binding="same">
+ <family>Cousine</family>
+ <default>
+ <family>Liberation Mono</family>
+ </default>
+ </alias>
+ <alias binding="same">
+ <family>Courier New</family>
+ <accept>
+ <family>Cousine</family>
+ </accept>
+ </alias>
+ <alias binding="same">
+ <family>Cousine</family>
+ <default>
+ <family>Courier New</family>
+ </default>
+ </alias>
+</fontconfig>
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE fontconfig SYSTEM "../fonts.dtd">
+<fontconfig>
+ <alias binding="same">
+ <family>Symbol</family>
+ <accept>
+ <family>Symbol Neu</family>
+ </accept>
+ </alias>
+ <alias binding="same">
+ <family>Symbol Neu</family>
+ <default>
+ <family>Symbol</family>
+ </default>
+ </alias>
+</fontconfig>
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE fontconfig SYSTEM "../fonts.dtd">
+<fontconfig>
+ <alias>
+ <family>serif</family>
+ <prefer>
+ <family>Tinos</family>
+ </prefer>
+ </alias>
+ <alias>
+ <family>Tinos</family>
+ <default>
+ <family>serif</family>
+ </default>
+ </alias>
+ <alias binding="same">
+ <family>Liberation Serif</family>
+ <accept>
+ <family>Tinos</family>
+ </accept>
+ </alias>
+ <alias binding="same">
+ <family>Tinos</family>
+ <default>
+ <family>Liberation Serif</family>
+ </default>
+ </alias>
+ <alias binding="same">
+ <family>Times New Roman</family>
+ <accept>
+ <family>Tinos</family>
+ </accept>
+ </alias>
+ <alias binding="same">
+ <family>Tinos</family>
+ <default>
+ <family>Times New Roman</family>
+ </default>
+ </alias>
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: infinality -->
+
+ <!-- ****************************************************************** -->
+ <!-- *************************** ALIASES ****************************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Default fonts -->
+ <alias>
+ <family>sans-serif</family>
+ <prefer>
+ <family>Arial</family>
+ </prefer>
+ </alias>
+ <alias>
+ <family>serif</family>
+ <prefer>
+ <family>Times New Roman</family>
+ </prefer>
+ </alias>
+ <alias>
+ <family>monospace</family>
+ <prefer>
+ <family>Courier New</family>
+ </prefer>
+ </alias>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: linux -->
+
+ <!-- ****************************************************************** -->
+ <!-- *************************** ALIASES ****************************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Default fonts - Linux Appearance -->
+ <alias>
+ <family>sans-serif</family>
+ <prefer>
+ <family>DejaVu Sans</family>
+ </prefer>
+ </alias>
+ <alias>
+ <family>serif</family>
+ <prefer>
+ <family>Liberation Serif</family>
+ </prefer>
+ </alias>
+ <alias>
+ <family>monospace</family>
+ <prefer>
+ <family>Liberation Mono</family>
+ </prefer>
+ </alias>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: osx, osx2 -->
+
+ <!-- ****************************************************************** -->
+ <!-- *************************** ALIASES ****************************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Default fonts - OSX Appearance -->
+ <alias>
+ <family>sans-serif</family>
+ <prefer>
+ <family>Lucida Grande</family>
+ </prefer>
+ </alias>
+ <alias>
+ <family>serif</family>
+ <prefer>
+ <family>Times</family>
+ </prefer>
+ </alias>
+ <alias>
+ <family>monospace</family>
+ <prefer>
+ <family>Courier</family>
+ </prefer>
+ </alias>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: win7, winxp, win98 -->
+
+ <!-- ****************************************************************** -->
+ <!-- *************************** ALIASES ****************************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Default fonts - Microsoft Appearance -->
+ <alias>
+ <family>sans-serif</family>
+ <prefer>
+ <family>Arial</family>
+ </prefer>
+ </alias>
+ <alias>
+ <family>serif</family>
+ <prefer>
+ <family>Times New Roman</family>
+ </prefer>
+ </alias>
+ <alias>
+ <family>monospace</family>
+ <prefer>
+ <family>Courier New</family>
+ </prefer>
+ </alias>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: common -->
+
+ <!-- Fixes issues where Cantarell is not being displayed -->
+ <match target="pattern">
+ <test name="family">
+ <string>Cantarell</string>
+ </test>
+ <edit name="family" mode="assign" binding="strong">
+ <string>Cantarell</string>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: linux -->
+
+ <!-- ****************************************************************** -->
+ <!-- *************************** WINE ALIASES ************************* -->
+ <!-- ****************************************************************** -->
+
+ <!-- WINE UI fonts - Linux Appearance -->
+ <alias binding="same">
+ <family>System</family>
+ <prefer>
+ <family>DejaVu Sans</family>
+ </prefer>
+ </alias>
+ <alias binding="same">
+ <family>MS Shell Dlg</family>
+ <prefer>
+ <family>DejaVu Sans</family>
+ </prefer>
+ </alias>
+ <alias binding="same">
+ <family>MS Sans Serif</family>
+ <prefer>
+ <family>DejaVu Sans</family>
+ </prefer>
+ </alias>
+
+</fontconfig>
\ No newline at end of file
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: osx, osx2 -->
+
+ <!-- ****************************************************************** -->
+ <!-- *************************** WINE ALIASES ************************* -->
+ <!-- ****************************************************************** -->
+
+ <!-- WINE UI fonts - OSX Appearance -->
+ <alias binding="same">
+ <family>System</family>
+ <prefer>
+ <family>Lucida Grande</family>
+ </prefer>
+ </alias>
+ <alias binding="same">
+ <family>MS Shell Dlg</family>
+ <prefer>
+ <family>Lucida Grande</family>
+ </prefer>
+ </alias>
+ <alias binding="same">
+ <family>MS Sans Serif</family>
+ <prefer>
+ <family>Lucida Grande</family>
+ </prefer>
+ </alias>
+
+</fontconfig>
\ No newline at end of file
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: infinality, win7 -->
+
+ <!-- ****************************************************************** -->
+ <!-- *************************** WINE ALIASES ************************* -->
+ <!-- ****************************************************************** -->
+
+ <!-- These MS aliases typically are used in user interfaces -->
+ <!-- You will mostly run into fonts with these names in WINE programs -->
+ <!-- WINE UI fonts - Microsoft Windows Vista/7 Appearance -->
+
+ <alias binding="same">
+ <family>System</family>
+ <prefer>
+ <family>Segoe UI</family>
+ </prefer>
+ </alias>
+ <alias binding="same">
+ <family>MS Shell Dlg</family>
+ <prefer>
+ <family>Segoe UI</family>
+ </prefer>
+ </alias>
+ <alias binding="same">
+ <family>MS Sans Serif</family>
+ <prefer>
+ <family>Segoe UI</family>
+ </prefer>
+ </alias>
+
+</fontconfig>
\ No newline at end of file
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: win98 -->
+
+ <!-- ****************************************************************** -->
+ <!-- *************************** WINE ALIASES ************************* -->
+ <!-- ****************************************************************** -->
+
+ <!-- WINE UI fonts - Microsoft Windows 98 Appearance -->
+ <!--
+ Make sure font smoothing is DISABLED within WINE:
+ wget http://files.polosatus.ru/winefontssmoothing_en.sh
+ sh winefontssmoothing_en.sh
+ -->
+ <alias binding="same">
+ <family>System</family>
+ <prefer>
+ <family>Microsoft Sans Serif</family>
+ </prefer>
+ </alias>
+ <alias binding="same">
+ <family>MS Shell Dlg</family>
+ <prefer>
+ <family>Microsoft Sans Serif</family>
+ </prefer>
+ </alias>
+ <alias binding="same">
+ <family>MS Sans Serif</family>
+ <prefer>
+ <family>Microsoft Sans Serif</family>
+ </prefer>
+ </alias>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: winxp -->
+
+ <!-- ****************************************************************** -->
+ <!-- *************************** WINE ALIASES ************************* -->
+ <!-- ****************************************************************** -->
+
+ <!-- WINE UI fonts - Microsoft Windows XP Appearance -->
+
+ <alias binding="same">
+ <family>System</family>
+ <prefer>
+ <family>Tahoma</family>
+ </prefer>
+ </alias>
+ <alias binding="same">
+ <family>MS Shell Dlg</family>
+ <prefer>
+ <family>Tahoma</family>
+ </prefer>
+ </alias>
+ <alias binding="same">
+ <family>MS Sans Serif</family>
+ <prefer>
+ <family>Tahoma</family>
+ </prefer>
+ </alias>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: infinality, win7, winxp, win98 -->
+
+ <!-- ****************************************************************** -->
+ <!-- *********************** FONT PRIORITIES ************************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Establish priorities for non-Latin fonts -->
+ <!-- http://en.wikipedia.org/wiki/List_of_Microsoft_Windows_fonts -->
+
+ <!-- Non-latin fonts - Microsoft Windows Vista/7 Appearance -->
+
+ <alias binding="weak">
+ <family>serif</family>
+ <prefer>
+ <family>Times New Roman</family>
+ <family>Batang</family>
+ <family>DFKai-SB</family>
+ <family>EucrosiaUPC</family>
+ <family>JasmineUPC</family>
+ <family>KaiTi</family>
+ <family>Kartika</family>
+ <family>KodchiangUPC</family>
+ <family>MingLiU</family>
+ <family>MS Mincho</family>
+ <family>SimSun</family>
+ <family>Sylfaen</family>
+ <family>DaunPenh</family>
+ <family>MV Boli</family>
+ <family>Iskoola Pota</family>
+ <family>Latha</family>
+ <family>Microsoft Himalaya</family>
+ <family>Mongolian Baiti</family>
+ <family>Shruti</family>
+ <family>Cardo</family>
+ <family>MPH 2B Damase</family>
+ <family>Times</family>
+ <family>Palatino Linotype</family>
+ <family>Liberation Serif</family>
+ <family>FreeSerif</family>
+ <family>Georgia</family>
+ </prefer>
+ </alias>
+ <alias binding="weak">
+ <family>sans-serif</family>
+ <prefer>
+ <family>Arial</family>
+ <family>Meiryo</family>
+ <family>Arabic Typesetting</family>
+ <family>DokChampa</family>
+ <family>Malgun Gothic</family>
+ <family>Estrangelo Edessa</family>
+ <family>Gautami</family>
+ <family>Iskoola Pota</family>
+ <family>Microsoft YaHei</family>
+ <family>Mangal</family>
+ <family>Microsoft JhengHei</family>
+ <family>Vrinda</family>
+ <family>Plantagenet Cherokee</family>
+ <family>Raavi</family>
+ <family>Nyala</family>
+ <family>Tunga</family>
+ <family>Kartika</family>
+ <family>MV Boli</family>
+ <family>DaunPenh</family>
+ <family>Iskoola Pota</family>
+ <family>Latha</family>
+ <family>Microsoft Himalaya</family>
+ <family>Mongolian Baiti</family>
+ <family>Shruti</family>
+ <family>Skeirs</family>
+ <family>Cardo</family>
+ <family>MPH 2B Damase</family>
+ <family>Tahoma</family>
+ <family>Arial Unicode MS</family>
+ <family>Helvetica Neue</family>
+ <family>Helvetica</family>
+ <family>Liberation Sans</family>
+ </prefer>
+ </alias>
+ <alias binding="weak">
+ <family>monospace</family>
+ <prefer>
+ <family>Courier New</family>
+ <family>Consolas</family>
+ <family>Inconsolata</family>
+ <family>Andale Mono</family>
+ <family>Courier New</family>
+ <family>Microsoft JhengHei</family>
+ <family>Microsoft YaHei</family>
+ <family>MPH 2B Damase</family>
+ <family>Courier</family>
+ <family>Liberation Mono</family>
+ <family>Droid Sans Mono</family>
+ <family>FreeMono</family>
+ </prefer>
+ </alias>
+ <alias binding="weak">
+ <family>fantasy</family>
+ <prefer>
+ <family>Impact</family>
+ <family>Copperplate Gothic Std</family>
+ <family>Cooper Std</family>
+ <family>Bauhaus Std</family>
+ </prefer>
+ </alias>
+ <alias binding="weak">
+ <family>cursive</family>
+ <prefer>
+ <family>ITC Zapf Chancery Std</family>
+ <family>Zapfino</family>
+ <family>Comic Sans MS</family>
+ <family>Chalkboard</family>
+ <family>Chalkduster</family>
+ </prefer>
+ </alias>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: osx, osx2, linux -->
+
+ <!-- ****************************************************************** -->
+ <!-- *********************** FONT PRIORITIES ************************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Non-latin fonts - OSX or Linux Appearance -->
+ <!-- Please feel free to offer assistance here! -->
+
+ <alias binding="weak">
+ <family>serif</family>
+ <prefer>
+ <family>Times</family>
+ <family>Liberation Serif</family>
+ <family>FreeSerif</family>
+ <family>Times New Roman</family>
+ <family>Batang</family>
+ <family>DFKai-SB</family>
+ <family>EucrosiaUPC</family>
+ <family>JasmineUPC</family>
+ <family>KaiTi</family>
+ <family>Kartika</family>
+ <family>KodchiangUPC</family>
+ <family>MingLiU</family>
+ <family>MS Mincho</family>
+ <family>SimSun</family>
+ <family>Sylfaen</family>
+ <family>DaunPenh</family>
+ <family>MV Boli</family>
+ <family>Iskoola Pota</family>
+ <family>Latha</family>
+ <family>Microsoft Himalaya</family>
+ <family>Mongolian Baiti</family>
+ <family>Shruti</family>
+ <family>Cardo</family>
+ <family>MPH 2B Damase</family>
+ <family>Georgia</family>
+ <family>Palatino Linotype</family>
+ </prefer>
+ </alias>
+ <alias binding="weak">
+ <family>sans-serif</family>
+ <prefer>
+ <family>Helvetica Neue</family>
+ <family>Helvetica</family>
+ <family>Liberation Sans</family>
+ <family>Arial</family>
+ <family>Meiryo</family>
+ <family>Arabic Typesetting</family>
+ <family>DokChampa</family>
+ <family>Malgun Gothic</family>
+ <family>Estrangelo Edessa</family>
+ <family>Gautami</family>
+ <family>Iskoola Pota</family>
+ <family>Microsoft YaHei</family>
+ <family>Mangal</family>
+ <family>Microsoft JhengHei</family>
+ <family>Vrinda</family>
+ <family>Plantagenet Cherokee</family>
+ <family>Raavi</family>
+ <family>Nyala</family>
+ <family>Tunga</family>
+ <family>Kartika</family>
+ <family>MV Boli</family>
+ <family>DaunPenh</family>
+ <family>Iskoola Pota</family>
+ <family>Latha</family>
+ <family>Microsoft Himalaya</family>
+ <family>Mongolian Baiti</family>
+ <family>Shruti</family>
+ <family>Skeirs</family>
+ <family>Cardo</family>
+ <family>MPH 2B Damase</family>
+ <family>Tahoma</family>
+ <family>Arial Unicode MS</family>
+ </prefer>
+ </alias>
+ <alias binding="weak">
+ <family>monospace</family>
+ <prefer>
+ <family>Courier</family>
+ <family>Liberation Mono</family>
+ <family>Droid Sans Mono</family>
+ <family>FreeMono</family>
+ <family>Courier New</family>
+ <family>Consolas</family>
+ <family>Inconsolata</family>
+ <family>Andale Mono</family>
+ <family>Courier New</family>
+ <family>Microsoft JhengHei</family>
+ <family>Microsoft YaHei</family>
+ <family>MPH 2B Damase</family>
+ </prefer>
+ </alias>
+ <alias binding="weak">
+ <family>fantasy</family>
+ <prefer>
+ <family>Impact</family>
+ <family>Copperplate Gothic Std</family>
+ <family>Cooper Std</family>
+ <family>Bauhaus Std</family>
+ </prefer>
+ </alias>
+ <alias binding="weak">
+ <family>cursive</family>
+ <prefer>
+ <family>ITC Zapf Chancery Std</family>
+ <family>Zapfino</family>
+ <family>Comic Sans MS</family>
+ <family>Chalkboard</family>
+ <family>Chalkduster</family>
+ </prefer>
+ </alias>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: manual -->
+
+ <!-- ****************************************************************** -->
+ <!-- *********************** GENERIC REPLACEMENTS ******************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Replaces sans-serif, serif, monospace with a specific font preference -->
+ <!-- This is also set in aliases above -->
+
+ <match target="font">
+ <test name="family">
+ <string>sans-serif</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Arial</string>
+ </edit>
+ </match>
+ <match target="font">
+ <test name="family">
+ <string>serif</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Times New Roman</string>
+ </edit>
+ </match>
+ <match target="font">
+ <test name="family">
+ <string>monospace</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Courier New</string>
+ </edit>
+ </match>
+
+ <!--
+ style: sans-serif, serif, monospace
+ Microsoft: Arial, Times New Roman, Courier New
+ OSX: Helvetica Neue, Times, Courier
+ Linux: DejaVu Sans, Liberation Serif, Liberation Mono
+ -->
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: infinality -->
+
+ <!-- ****************************************************************** -->
+ <!-- *********************** OS FONT REPLACEMENTS ******************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Optionally replace these common cloned fonts with their OS equivalent -->
+
+ <!-- Infinality Appearance - Replace Various Fonts -->
+
+ <match target="pattern">
+ <test name="family" qual="first">
+ <string>Helvetica</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Arial</string>
+ </edit>
+ </match>
+ <match target="font">
+ <test name="family">
+ <string>Helvetica</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Arial</string>
+ </edit>
+ </match>
+
+ <match target="pattern">
+ <test name="family" qual="first">
+ <string>Courier 10 Pitch</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Courier New</string>
+ </edit>
+ </match>
+ <match target="font">
+ <test name="family">
+ <string>Courier 10 Pitch</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Courier New</string>
+ </edit>
+ </match>
+
+ <match target="pattern">
+ <test name="family" qual="first">
+ <string>Helvetica Neue</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Arial</string>
+ </edit>
+ </match>
+ <match target="font">
+ <test name="family">
+ <string>Helvetica Neue</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Arial</string>
+ </edit>
+ </match>
+
+ <match target="pattern">
+ <test name="family">
+ <string>Palatino</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Palatino Linotype</string>
+ </edit>
+ </match>
+ <match target="font">
+ <test name="family">
+ <string>Palatino</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Palatino Linotype</string>
+ </edit>
+ </match>
+
+ <match target="pattern">
+ <test name="family">
+ <string>Lucida Sans</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Lucida Grande</string>
+ </edit>
+ </match>
+ <match target="font">
+ <test name="family">
+ <string>Lucida Sans</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Lucida Grande</string>
+ </edit>
+ </match>
+
+ <!-- Replace Courier New 10px and under with Courier -->
+ <!-- doesn't work on chrome -->
+ <match target="pattern">
+ <test name="family">
+ <string>Courier New</string>
+ </test>
+ <test name="pixelsize" compare="less_eq">
+ <double>10</double>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Courier</string>
+ </edit>
+ </match>
+ <match target="font">
+ <test name="family">
+ <string>Courier New</string>
+ </test>
+ <test name="pixelsize" compare="less_eq">
+ <double>10</double>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Courier</string>
+ </edit>
+ </match>
+
+ <!-- Replace Times with Times New Roman -->
+ <match target="pattern">
+ <test name="family">
+ <string>Times</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Times New Roman</string>
+ </edit>
+ </match>
+ <match target="font">
+ <test name="family">
+ <string>Times</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Times New Roman</string>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: linux -->
+
+ <!-- Linux Appearance - Replace with Linux fonts -->
+ <match target="font">
+ <test name="family">
+ <string>Nimbus Sans</string>
+ <string>Nimbus Sans L</string>
+ <string>Arial</string>
+ <string>Helvetica</string>
+ <string>Helvetica Neue</string>
+ <string>Freesans</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Liberation Sans</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Nimbus Sans</string>
+ <string>Nimbus Sans L</string>
+ <string>Arial</string>
+ <string>Helvetica</string>
+ <string>Helvetica Neue</string>
+ <string>Freesans</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Liberation Sans</string>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="family">
+ <string>Bitstream Vera Sans</string>
+ <string>Verdana</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>DejaVu Sans</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Bitstream Vera Sans</string>
+ <string>Verdana</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>DejaVu Sans</string>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="family">
+ <string>Courier</string>
+ <string>FreeMono</string>
+ <string>Nimbus Mono L</string>
+ <string>Courier New</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Liberation Mono</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Courier</string>
+ <string>FreeMono</string>
+ <string>Nimbus Mono L</string>
+ <string>Courier New</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Liberation Mono</string>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="family">
+ <string>Times</string>
+ <string>Nimbus Serif L</string>
+ <string>Times New Roman</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>DejaVu Serif</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Times</string>
+ <string>Nimbus Serif L</string>
+ <string>Times New Roman</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>DejaVu Serif</string>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: osx, osx2 -->
+
+ <!-- OSX Appearance - Replace with OSX fonts -->
+ <match target="font">
+ <test name="family">
+ <string>Nimbus Sans</string>
+ <string>Nimbus Sans L</string>
+ <string>Arial</string>
+ <string>Liberation Sans</string>
+ <string>Freesans</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Helvetica Neue</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Nimbus Sans</string>
+ <string>Nimbus Sans L</string>
+ <string>Arial</string>
+ <string>Liberation Sans</string>
+ <string>Freesans</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Helvetica Neue</string>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="family">
+ <string>Courier New</string>
+ <string>FreeMono</string>
+ <string>Nimbus Mono L</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Courier</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Courier New</string>
+ <string>FreeMono</string>
+ <string>Nimbus Mono L</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Courier</string>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="family">
+ <string>Times New Roman</string>
+ <string>DejaVu Serif</string>
+ <string>Nimbus Serif L</string>
+ <string>Liberation Serif</string>
+ <string>FreeSerif</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Times</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Times New Roman</string>
+ <string>DejaVu Serif</string>
+ <string>Nimbus Serif L</string>
+ <string>Liberation Serif</string>
+ <string>FreeSerif</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Times</string>
+ </edit>
+ </match>
+
+ <match target="pattern">
+ <test name="family">
+ <string>Palatino Linotype</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Palatino</string>
+ </edit>
+ </match>
+ <match target="font">
+ <test name="family">
+ <string>Palatino Linotype</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Palatino</string>
+ </edit>
+ </match>
+
+ <match target="pattern">
+ <test name="family">
+ <string>Lucida Sans</string>
+ <string>Lucida Sans Unicode</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Lucida Grande</string>
+ </edit>
+ </match>
+ <match target="font">
+ <test name="family">
+ <string>Lucida Sans</string>
+ <string>Lucida Sans Unicode</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Lucida Grande</string>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: win7, winxp, win98 -->
+
+ <!-- Microsoft Appearance - Replace With MS Fonts -->
+ <match target="font">
+ <test name="family">
+ <string>Nimbus Sans</string>
+ <string>Nimbus Sans L</string>
+ <string>Helvetica Neue</string>
+ <string>Helvetica</string>
+ <string>Liberation Sans</string>
+ <string>Freesans</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Arial</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Nimbus Sans</string>
+ <string>Nimbus Sans L</string>
+ <string>Helvetica Neue</string>
+ <string>Helvetica</string>
+ <string>Liberation Sans</string>
+ <string>Freesans</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Arial</string>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="family">
+ <string>Bitstream Vera Sans</string>
+ <string>DejaVu Sans</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Verdana</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Bitstream Vera Sans</string>
+ <string>DejaVu Sans</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Verdana</string>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="family">
+ <string>Courier</string>
+ <string>FreeMono</string>
+ <string>Nimbus Mono L</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Courier New</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Courier</string>
+ <string>FreeMono</string>
+ <string>Nimbus Mono L</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Courier New</string>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="family">
+ <string>Times</string>
+ <string>DejaVu Serif</string>
+ <string>Nimbus Serif L</string>
+ <string>Liberation Serif</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Times New Roman</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Times</string>
+ <string>DejaVu Serif</string>
+ <string>Nimbus Serif L</string>
+ <string>Liberation Serif</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Times New Roman</string>
+ </edit>
+ </match>
+
+ <match target="pattern">
+ <test name="family">
+ <string>Palatino</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Palatino Linotype</string>
+ </edit>
+ </match>
+ <match target="font">
+ <test name="family">
+ <string>Palatino</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Palatino Linotype</string>
+ </edit>
+ </match>
+
+ <match target="pattern">
+ <test name="family">
+ <string>Lucida Sans</string>
+ <string>Lucida Grande</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Lucida Sans Unicode</string>
+ </edit>
+ </match>
+ <match target="font">
+ <test name="family">
+ <string>Lucida Sans</string>
+ <string>Lucida Grande</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Lucida Sans Unicode</string>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: common -->
+
+ <!-- Global Replacements - Active if set to true above -->
+ <!-- Add your own replacements here -->
+ <!-- Clone "match" blocks below for each replacement -->
+ <match target="font">
+ <test name="family">
+ <string>FONT TO REPLACE 1</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>REPLACEMENT FONT 1</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>FONT TO REPLACE 1</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>REPLACEMENT FONT 1</string>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="family">
+ <string>FONT TO REPLACE 2</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>REPLACEMENT FONT 2</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>FONT TO REPLACE 2</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>REPLACEMENT FONT 2</string>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: common -->
+
+ <!-- This replacement handles the fonts here, if you have the TTF outline version installed
+ instead of the bitmap (pcf, bdf) files.
+ http://files.ax86.net/terminus-ttf/
+
+ Note that Terminus and other outline traced bitmap TTFs will only look good
+ at the pixel sizes they were designed for, unless they also contain embedded bitmaps.
+
+ This replacement has been verified to be safe, even if Terminus (TTF) isn't installed.
+ -->
+
+ <match target="font">
+ <test name="family">
+ <string>Terminus</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Terminus (ttf)</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Terminus</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Terminus (ttf)</string>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="family">
+ <string>Profont</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>ProFontWindows</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Profont</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>ProFontWindows</string>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="family">
+ <string>ProggyClean</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>ProggyCleanTT</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>ProggyClean</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>ProggyCleanTT</string>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="family">
+ <string>ProggySquare</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>ProggySquareTTSZ</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>ProggySquare</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>ProggySquareTTSZ</string>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="family">
+ <string>ProggyTiny</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>ProggyTinyTTSZ</string>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>ProggyTiny</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>ProggyTinyTTSZ</string>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: common -->
+
+ <!-- ****************************************************************** -->
+ <!-- ******************** CORRECTIVE REPLACEMENTS ******************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Replace "Arial" with black weight, with "Arial Black" -->
+ <match target="pattern">
+ <test name="family">
+ <string>Arial</string>
+ </test>
+ <test name="weight" compare="more">
+ <const>bold</const>
+ </test>
+ <edit name="family" mode="prepend" binding="same">
+ <string>Arial Black</string>
+ </edit>
+ <edit name="weight" mode="assign">
+ <const>black</const>
+ </edit>
+ </match>
+
+ <!-- Fix poorly specified font family names -->
+ <match target="pattern">
+ <test name="family">
+ <string>Trebuchet</string>
+ </test>
+ <edit name="family" mode="prepend" binding="strong">
+ <string>Trebuchet MS</string>
+ </edit>
+ </match>
+ <match target="font">
+ <test name="family">
+ <string>Trebuchet</string>
+ </test>
+ <edit name="family" mode="assign">
+ <string>Trebuchet MS</string>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: infinality, osx, linux -->
+
+ <!-- ****************************************************************** -->
+ <!-- ******************* BASE RENDERING SETTINGSS ******************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- These are the base settings for all rendered fonts.
+ We modify them for specific fonts later. -->
+
+ <match target="font">
+ <edit name="rgba" mode="assign">
+ <const>rgb</const>
+ </edit>
+ <edit name="hinting" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ <edit name="lcdfilter" mode="assign">
+ <const>lcddefault</const>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: osx2 -->
+
+ <!-- ****************************************************************** -->
+ <!-- ******************* BASE RENDERING SETTINGSS ******************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- These are the base settings for all rendered fonts.
+ We modify them for specific fonts later. -->
+
+ <match target="font">
+ <edit name="rgba" mode="assign">
+ <const>rgb</const>
+ </edit>
+ <edit name="hinting" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintnone</const>
+ </edit>
+ <edit name="lcdfilter" mode="assign">
+ <const>lcddefault</const>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: win7, winxp -->
+
+ <!-- ****************************************************************** -->
+ <!-- ******************* BASE RENDERING SETTINGSS ******************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- These are the base settings for all rendered fonts.
+ We modify them for specific fonts later. -->
+
+ <match target="font">
+ <edit name="rgba" mode="assign">
+ <const>rgb</const>
+ </edit>
+ <edit name="hinting" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintfull</const>
+ </edit>
+ <edit name="lcdfilter" mode="assign">
+ <const>lcddefault</const>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: win98 -->
+
+ <!-- ****************************************************************** -->
+ <!-- ******************* BASE RENDERING SETTINGSS ******************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- These are the base settings for all rendered fonts.
+ We modify them for specific fonts later. -->
+
+ <match target="font">
+ <edit name="rgba" mode="assign">
+ <const>rgb</const>
+ </edit>
+ <edit name="hinting" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintfull</const>
+ </edit>
+ <edit name="lcdfilter" mode="assign">
+ <const>lcddefault</const>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: common -->
+
+ <!-- Make these fonts use autohint slight hinting -->
+ <!-- Makes only horizontal stems align to pixels. Truer to glyph -->
+
+ <!-- A list of non TT instructed fonts -->
+ <match target="font">
+ <test name="family">
+ <string>Abel</string>
+ <string>AR PL ShanHeiSun Uni</string>
+ <string>Abril Fatface</string>
+ <string>Aclonica</string>
+ <string>Acme</string>
+ <string>Actor</string>
+ <string>Aladin</string>
+ <string>Aldrich</string>
+ <string>Alex Brush</string>
+ <string>Alfa Slab One</string>
+ <string>Alike Angular</string>
+ <string>Alike</string>
+ <string>Allerta Stencil</string>
+ <string>Allerta</string>
+ <string>Almendra SC</string>
+ <string>Almendra</string>
+ <string>Amaranth</string>
+ <string>American Typewriter</string>
+ <string>Andada</string>
+ <string>Andika</string>
+ <string>Annie Use Your Telescope</string>
+ <string>Anton</string>
+ <string>Apple Garamond Light</string>
+ <string>Apple Garamond</string>
+ <string>Apple Symbols</string>
+ <string>AppleGothic</string>
+ <string>Arabic Typesetting</string>
+ <string>Arapey</string>
+ <string>Arbutus</string>
+ <string>Architects Daughter</string>
+ <string>Arizonia</string>
+ <string>Armata</string>
+ <string>Asset</string>
+ <string>Astloch</string>
+ <string>Asul</string>
+ <string>Atomic Age</string>
+ <string>Aubrey</string>
+ <string>Bad Script</string>
+ <string>Baekmuk Gulim</string>
+ <string>Balthazar</string>
+ <string>Bangers</string>
+ <string>Basic</string>
+ <string>Baskerville</string>
+ <string>Baumans</string>
+ <string>Belgrano</string>
+ <string>Bentham</string>
+ <string>Bevan</string>
+ <string>Big Caslon</string>
+ <string>Bigshot One</string>
+ <string>Bilbo Swash Caps</string>
+ <string>Bilbo</string>
+ <string>Bitter</string>
+ <string>Black Ops One</string>
+ <string>Bonbon</string>
+ <string>Boogaloo</string>
+ <string>Bowlby One SC</string>
+ <string>Bowlby One</string>
+ <string>Brawler</string>
+ <string>Bree Serif</string>
+ <string>BrushScript</string>
+ <string>Bubblegum Sans</string>
+ <string>Buda</string>
+ <string>Buenard</string>
+ <string>Butcherman</string>
+ <string>CMU Bright</string>
+ <string>Cabin Condensed</string>
+ <string>Cabin Sketch</string>
+ <string>Cabin</string>
+ <string>Caesar Dressing</string>
+ <string>Cagliostro</string>
+ <string>Calligraffitti</string>
+ <string>Cambo</string>
+ <string>Candal</string>
+ <string>Cantarell Regular</string>
+ <string>Cantarell</string>
+ <string>CantarellRegular</string>
+ <string>Cardo</string>
+ <string>Carme</string>
+ <string>Carter One</string>
+ <string>Caudex</string>
+ <string>Cedarville Cursive</string>
+ <string>Century Schoolbook L</string>
+ <string>Ceviche One</string>
+ <string>Changa One</string>
+ <string>Chango</string>
+ <string>Charis SIL</string>
+ <string>Cherry Cream Soda</string>
+ <string>Chewy</string>
+ <string>Chicle</string>
+ <string>Chivo</string>
+ <string>Cochin</string>
+ <string>Coda Caption</string>
+ <string>Coda</string>
+ <string>Comfortaa Regular</string>
+ <string>Comfortaa</string>
+ <string>ComfortaaRegular</string>
+ <string>Coming Soon</string>
+ <string>Concert One</string>
+ <string>Contrail One</string>
+ <string>Convergence</string>
+ <string>Cookie</string>
+ <string>Copperplate</string>
+ <string>Copse</string>
+ <string>Corben</string>
+ <string>Courier Std</string>
+ <string>Courier10 BT</string>
+ <string>Coustard</string>
+ <string>Covered By Your Grace</string>
+ <string>Crafty Girls</string>
+ <string>Creepster</string>
+ <string>Crete Round</string>
+ <string>Crimson Text</string>
+ <string>Crushed</string>
+ <string>Cuprum</string>
+ <string>Damion</string>
+ <string>Dancing Script</string>
+ <string>David</string>
+ <string>Dawning of a New Day</string>
+ <string>Days One</string>
+ <string>Delius Swash Caps</string>
+ <string>Delius Unicase</string>
+ <string>Delius</string>
+ <string>Devonshire</string>
+ <string>Didact Gothic</string>
+ <string>Didot</string>
+ <string>DilenniaUPC</string>
+ <string>District</string>
+ <string>DokChampa</string>
+ <string>Dorsa</string>
+ <string>Dr Sugiyama</string>
+ <string>Duru Sans</string>
+ <string>Dutch801 Rm BT</string>
+ <string>Dynalight</string>
+ <string>EB Garamond</string>
+ <string>Eater</string>
+ <string>Electrolize</string>
+ <string>Engagement</string>
+ <string>Enriqueta</string>
+ <string>EucrosiaUPC</string>
+ <string>Eurostile LT Std</string>
+ <string>Expletus Sans</string>
+ <string>Fanwood Text</string>
+ <string>Fascinate Inline</string>
+ <string>Fascinate</string>
+ <string>Federant</string>
+ <string>Federo</string>
+ <string>Fjord One</string>
+ <string>Flamenco</string>
+ <string>Flavors</string>
+ <string>Fondamento</string>
+ <string>Fontdiner Swanky</string>
+ <string>Forum</string>
+ <string>Francois One</string>
+ <string>FreeMono</string>
+ <string>FreeSans</string>
+ <string>FreeSerif</string>
+ <string>FreesiaUPC</string>
+ <string>Fresca</string>
+ <string>Frijole</string>
+ <string>Frutiger LT Std</string>
+ <string>Frutiger-Normal</string>
+ <string>Fugaz One</string>
+ <string>Galdeano</string>
+ <string>Gautami</string>
+ <string>Geneva Regular</string>
+ <string>Geo</string>
+ <string>Geostar Fill</string>
+ <string>Geostar</string>
+ <string>Give You Glory</string>
+ <string>Gloria Hallelujah</string>
+ <string>Goblin One</string>
+ <string>Gochi Hand</string>
+ <string>Goudy Bookletter 1911</string>
+ <string>Gravitas One</string>
+ <string>Gruppo</string>
+ <string>Habibi</string>
+ <string>Hammersmith One</string>
+ <string>Handlee</string>
+ <string>Helvetica CY</string>
+ <string>Helvetica Neue</string>
+ <string>Helvetica</string>
+ <string>Herr Von Muellerhoff</string>
+ <string>Holtwood One SC</string>
+ <string>Homemade Apple</string>
+ <string>IM Fell DW Pica SC</string>
+ <string>IM Fell DW Pica</string>
+ <string>IM Fell Double Pica SC</string>
+ <string>IM Fell Double Pica</string>
+ <string>IM Fell English SC</string>
+ <string>IM Fell English</string>
+ <string>IM Fell French Canon SC</string>
+ <string>IM Fell French Canon</string>
+ <string>IM Fell Great Primer SC</string>
+ <string>IM Fell Great Primer</string>
+ <string>IM Fell</string>
+ <string>Iceland</string>
+ <string>Inder</string>
+ <string>Indie Flower</string>
+ <string>IrisUPC</string>
+ <string>Irish Grover</string>
+ <string>Italianno</string>
+ <string>JasmineUPC</string>
+ <string>Jockey One</string>
+ <string>Jomolhari</string>
+ <string>Josefin Sans Std Light</string>
+ <string>Josefin Sans</string>
+ <string>Josefin Slab</string>
+ <string>Judson</string>
+ <string>Julee</string>
+ <string>Jura</string>
+ <string>Just Another Hand</string>
+ <string>Just Me Again Down Here</string>
+ <string>Kai</string>
+ <string>Kalinga</string>
+ <string>Kameron</string>
+ <string>Kelly Slab</string>
+ <string>Kenia</string>
+ <string>Knewave</string>
+ <string>KodchiangUPC</string>
+ <string>Kranky</string>
+ <string>Kreon</string>
+ <string>Kristi</string>
+ <string>La Belle Aurore</string>
+ <string>Laconic</string>
+ <string>Lacuna</string>
+ <string>Lancelot</string>
+ <string>Lato</string>
+ <string>League Script</string>
+ <string>Leckerli One</string>
+ <string>Lekton</string>
+ <string>Lemon</string>
+ <string>Levenim MT</string>
+ <string>LilyUPC</string>
+ <string>Limelight</string>
+ <string>Linden Hill</string>
+ <string>Linux Biolinum</string>
+ <string>Linux Libertine</string>
+ <string>Lobster Two</string>
+ <string>Lobster</string>
+ <string>Lohit Bengali</string>
+ <string>Lohit Gujarati</string>
+ <string>Lohit Hindi</string>
+ <string>Lohit Kannada</string>
+ <string>Lohit Malayalam</string>
+ <string>Lohit Oriya</string>
+ <string>Lohit Punjabi</string>
+ <string>Lohit Tamil</string>
+ <string>Lohit Telugu</string>
+ <string>Lohit Devanagari</string>
+ <string>Lora</string>
+ <string>Love Ya Like A Sister</string>
+ <string>Loved by the King</string>
+ <string>Lucida Sans Std</string>
+ <string>Luckiest Guy</string>
+ <string>Luxi Sans</string>
+ <string>Luxi Serif</string>
+ <string>M+ 2p</string>
+ <string>MS-Mincho</string>
+ <string>Maiden Orange</string>
+ <string>Marck Script</string>
+ <string>Marko One</string>
+ <string>Marmelad</string>
+ <string>Marvel</string>
+ <string>Mate SC</string>
+ <string>Mate</string>
+ <string>Maven Pro</string>
+ <string>Meddon</string>
+ <string>MedievalSharp</string>
+ <string>Medula One</string>
+ <string>Megalopolis</string>
+ <string>Megrim</string>
+ <string>Merienda One</string>
+ <string>Merriweather</string>
+ <string>Metamorphous</string>
+ <string>Metrophobic</string>
+ <string>MgOpen Canonica</string>
+ <string>MgOpen Cosmetica</string>
+ <string>MgOpen Modata</string>
+ <string>MgOpen Moderna</string>
+ <string>Michroma</string>
+ <string>Miltonian Tattoo</string>
+ <string>Miltonian</string>
+ <string>Miniver</string>
+ <string>Miriam</string>
+ <string>Miss Fajardose</string>
+ <string>Miss Saint Delafield</string>
+ <string>Modern Antiqua</string>
+ <string>Monofett</string>
+ <string>Monoton</string>
+ <string>Monsieur La Doulaise</string>
+ <string>Montez</string>
+ <string>Montserrat</string>
+ <string>Mountains of Christmas</string>
+ <string>Mr Bedford</string>
+ <string>Mr Dafoe</string>
+ <string>Mr De Haviland</string>
+ <string>Mrs Sheppards</string>
+ <string>Muli</string>
+ <string>Myriad Pro</string>
+ <string>MyriadRegular</string>
+ <string>Neucha</string>
+ <string>News Cycle</string>
+ <string>Niconne</string>
+ <string>Nimbus Mono L</string>
+ <string>Nimbus Roman No9 L</string>
+ <string>Nimbus Sans L</string>
+ <string>Nimbus Sans</string>
+ <string>Nixie One</string>
+ <string>Nobile-bold-italic002</string>
+ <string>Nobile-bold</string>
+ <string>Nobile-italic002</string>
+ <string>Nobile002</string>
+ <string>Nobile</string>
+ <string>Nosifer</string>
+ <string>Nothing You Could Do</string>
+ <string>Noticia Text</string>
+ <string>Numans</string>
+ <string>Nunito</string>
+ <string>OFL Sorts Mill Goudy TT</string>
+ <string>OTS derived font</string>
+ <string>OTS derivied font</string> <!-- bug in chrome code? -->
+ <string>Ocean Sans Std</string>
+ <string>Old Standard TT</string>
+ <string>Optima</string>
+ <string>Orbitron</string>
+ <string>Original Surfer</string>
+ <string>Oswald</string>
+ <string>Over the Rainbow</string>
+ <string>Overlock SC</string>
+ <string>Overlock</string>
+ <string>Ovo</string>
+ <string>Oxygen</string>
+ <string>Pacifico</string>
+ <string>Palladio</string>
+ <string>Passero One</string>
+ <string>Passion One</string>
+ <string>Patrick Hand</string>
+ <string>Patua One</string>
+ <string>Paytone One</string>
+ <string>Permanent Marker</string>
+ <string>Petrona</string>
+ <string>Philosopher</string>
+ <string>Piedra</string>
+ <string>Pinyon Script</string>
+ <string>Plaster</string>
+ <string>Playball</string>
+ <string>Playfair Display</string>
+ <string>Podkova</string>
+ <string>Poller One</string>
+ <string>Poly</string>
+ <string>Pompiere</string>
+ <string>Prata</string>
+ <string>PrimaSans BT</string>
+ <string>Prociono</string>
+ <string>Puritan</string>
+ <string>Quantico</string>
+ <string>Quattrocento Sans</string>
+ <string>Quattrocento</string>
+ <string>Questrial</string>
+ <string>Quicksand</string>
+ <string>Qwigley</string>
+ <string>Radley</string>
+ <string>Raleway</string>
+ <string>Rammetto One</string>
+ <string>Rancho</string>
+ <string>Rationale</string>
+ <string>Redressed</string>
+ <string>Ribeye Marrow</string>
+ <string>Ribeye</string>
+ <string>Righteous</string>
+ <string>Rochester</string>
+ <string>Rock Salt</string>
+ <string>Rokkitt</string>
+ <string>Rosario</string>
+ <string>Ruge Boogie</string>
+ <string>Ruslan Display</string>
+ <string>Ruthie</string>
+ <string>Sail</string>
+ <string>Salsa</string>
+ <string>Sancreek</string>
+ <string>Sansita One</string>
+ <string>Sarina</string>
+ <string>Satisfy</string>
+ <string>Schoolbell</string>
+ <string>Shadows Into Light</string>
+ <string>Shanti</string>
+ <string>Short Stack</string>
+ <string>Sigmar One</string>
+ <string>Signika Negative</string>
+ <string>Signika</string>
+ <string>SimHei</string>
+ <string>Six Caps</string>
+ <string>Slackey</string>
+ <string>Smokum</string>
+ <string>Smythe</string>
+ <string>Sniglet</string>
+ <string>Snippet</string>
+ <string>Sofia</string>
+ <string>Sorts Mill Goudy</string>
+ <string>Special Elite</string>
+ <string>Spicy Rice</string>
+ <string>Spinnaker</string>
+ <string>Spirax</string>
+ <string>Squada One</string>
+ <string>Stardos Stencil</string>
+ <string>Stint Ultra Condensed</string>
+ <string>Stoke</string>
+ <string>Sue Ellen Francisco</string>
+ <string>Sunshiney</string>
+ <string>Supermercado One</string>
+ <string>Swanky and Moo Moo</string>
+ <string>Swansea</string>
+ <string>Swiss721</string>
+ <string>Syncopate</string>
+ <string>Tenor Sans</string>
+ <string>Terminal Dosis</string>
+ <string>The Girl Next Door</string>
+ <string>TheSans Mono</string>
+ <string>Tienne</string>
+ <string>Times LT Std</string>
+ <string>Times New Roman MT Std</string>
+ <string>Times Roman</string>
+ <string>Times Ten LT Std</string>
+ <string>Trade Winds</string>
+ <string>Trykker</string>
+ <string>Tulpen One</string>
+ <string>URWClassico</string>
+ <string>Ultra-Light 100</string>
+ <string>Ultra</string>
+ <string>Uncial Antiqua</string>
+ <string>UnifrakturCook</string>
+ <string>UnifrakturMaguntia</string>
+ <string>Univers LT Std</string>
+ <string>Unkempt</string>
+ <string>Unlock</string>
+ <string>Unna</string>
+ <string>Utopia</string>
+ <string>VT323</string>
+ <string>Varela Round</string>
+ <string>Varela</string>
+ <string>Vast Shadow</string>
+ <string>Verdimka</string>
+ <string>Vibur</string>
+ <string>Vidaloka</string>
+ <string>Viga</string>
+ <string>Volkhov</string>
+ <string>Voltaire</string>
+ <string>Waiting for the Sunrise</string>
+ <string>Wallpoet</string>
+ <string>Walter Turncoat</string>
+ <string>Wire One</string>
+ <string>Yellowtail</string>
+ <string>Yeseva One</string>
+ <string>Yesteryear</string>
+ <string>Zeyada</string>
+ <string>cmbx10</string>
+ <string>cmex10</string>
+ <string>cmmi10</string>
+ <string>cmr10</string>
+ <string>cmsy10</string>
+ <string>cmtt10</string>
+ <string>eufm10</string>
+ <string>msam10</string>
+ <string>msbm10</string>
+ <string>proxima nova bold</string>
+ <string>proxima nova regular</string>
+ <string>proxima nova</string>
+ <string>proxima-nova-1</string>
+ <string>proxima-nova-2</string>
+ <string>wasy10</string>
+ </test>
+ <edit name="font_type" mode="assign">
+ <string>NON TT Instructed Font</string>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="font_type">
+ <string>NON TT Instructed Font</string>
+ </test>
+ <edit name="autohint" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ <edit name="hinting" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: common -->
+
+ <!-- A list of TT instructed fonts that are verified
+ to look OK with infinality patches -->
+
+ <match target="font">
+ <test name="force_autohint">
+ <bool>false</bool>
+ </test>
+ <test name="family">
+ <string>Adamina</string>
+ <string>Aguafina Script</string>
+ <string>Alice</string>
+ <string>Allan</string>
+ <string>Aller Display</string>
+ <string>Aller Light</string>
+ <string>Aller</string>
+ <string>Amatic SC</string>
+ <string>Andale Mono</string>
+ <string>Andalus</string>
+ <string>Angsana New</string>
+ <string>AngsanaUPC</string>
+ <string>Anonymous Pro</string>
+ <string>Anonymous</string>
+ <string>Antic</string>
+ <string>Aparajita</string>
+ <string>Apple Chancery</string>
+ <string>Apple LiGothic</string>
+ <string>Aquabase</string>
+ <string>Arabic Typesetting</string>
+ <string>Arial Black</string>
+ <string>Arial MT</string>
+ <string>Arial Monospaced</string>
+ <string>Arial Narrow</string>
+ <string>Arial SF MT</string>
+ <string>Arial Unicode MS</string>
+ <string>Arial</string>
+ <string>ArialMT</string>
+ <string>Arimo</string>
+ <string>Arimo</string>
+ <string>Artifika</string>
+ <string>Arvo</string>
+ <string>BPmono</string>
+ <string>Batang</string>
+ <string>BatangChe</string>
+ <string>Bitstream Charter</string>
+ <string>Bitstream Vera Sans Mono</string>
+ <string>Bitstream Vera Sans</string>
+ <string>Bitstream Vera Serif</string>
+ <string>Book Antiqua</string>
+ <string>Bookman Old Style</string>
+ <string>Browallia New</string>
+ <string>BrowalliaUPC</string>
+ <string>Calibri</string>
+ <string>Cambria Math</string>
+ <string>Cambria</string>
+ <string>Candara</string>
+ <string>Century Gothic</string>
+ <string>Century</string>
+ <string>Chalkboard</string>
+ <string>Chalkduster</string>
+ <string>Charcoal CY</string>
+ <string>Charcoal</string>
+ <string>Charis SIL</string>
+ <string>Chicago</string>
+ <string>Comic Sans MS</string>
+ <string>Consolas</string>
+ <string>Constantia</string>
+ <string>Corbel</string>
+ <string>Cordia New</string>
+ <string>CordiaUPC</string>
+ <string>Courier 10 Pitch</string>
+ <string>Courier New</string>
+ <string>Courier</string>
+ <string>Cousine</string>
+ <string>DFKai-SB</string>
+ <string>Dark Courier</string>
+ <string>DaunPenh</string>
+ <string>David</string>
+ <string>DejaVu LGC Sans Mono</string>
+ <string>DejaVu Sans Mono</string>
+ <string>DejaVu Sans</string>
+ <string>DejaVu Serif</string>
+ <string>Delicious</string>
+ <string>DilleniaUPC</string>
+ <string>DokChampa</string>
+ <string>Dotum</string>
+ <string>DotumChe</string>
+ <string>Droid Sans Mono</string>
+ <string>Droid Sans</string>
+ <string>Droid Serif</string>
+ <string>Ebrima</string>
+ <string>Essential PragmataPro</string>
+ <string>Estrangelo Edessa</string>
+ <string>EucrosiaUPC</string>
+ <string>Euphemia</string>
+ <string>FangSong</string>
+ <string>FrankRuehl</string>
+ <string>Franklin Gothic Medium</string>
+ <string>FreesiaUPC</string>
+ <string>Frutiger Linotype</string>
+ <string>Futura</string>
+ <string>Gabriola</string>
+ <string>Garamond</string>
+ <string>Gautami</string>
+ <string>Geneva</string>
+ <string>Geneva CY</string>
+ <string>Gentium Basic</string>
+ <string>Gentium Book Basic</string>
+ <string>Gentium</string>
+ <string>Georgia</string>
+ <string>Gill Sans</string>
+ <string>Gisha</string>
+ <string>Gotham Book</string>
+ <string>Gotham Light</string>
+ <string>Gotham Medium</string>
+ <string>Guatami</string>
+ <string>Gulim</string>
+ <string>GulimChe</string>
+ <string>Gungsuh</string>
+ <string>GungsuhChe</string>
+ <string>Hard Gothic</string>
+ <string>Herculanum</string>
+ <string>Hoefler Text</string>
+ <string>Impact</string>
+ <string>Inconsolata</string>
+ <string>IrisUPC</string>
+ <string>Iskoola Pota</string>
+ <string>Istok Web</string>
+ <string>JasmineUPC</string>
+ <string>KaiTi</string>
+ <string>Kalinga</string>
+ <string>Kartika</string>
+ <string>Khmer UI</string>
+ <string>KodchiangUPC</string>
+ <string>Kokila</string>
+ <string>Lao UI</string>
+ <string>Latha</string>
+ <string>Leelawadee</string>
+ <string>Levenim MT</string>
+ <string>Liberation Mono</string>
+ <string>Liberation Sans</string>
+ <string>Liberation Serif</string>
+ <string>LilyUPC</string>
+ <string>Linux Libertine</string>
+ <string>Lobster</string>
+ <string>Lucida Console</string>
+ <string>Lucida Grande</string>
+ <string>Lucida Sans Typewriter</string>
+ <string>Lucida Sans Unicode</string>
+ <string>Lucida Sans</string>
+ <string>Luxi Mono</string>
+ <string>MS Gothic</string>
+ <string>MS Mincho</string>
+ <string>MS PGothic</string>
+ <string>MS PMincho</string>
+ <string>MS UI Gothic</string>
+ <string>MV Boli</string>
+ <string>Mako</string>
+ <string>Malgun Gothic</string>
+ <string>Mangal</string>
+ <string>Marker Felt</string>
+ <string>Meiryo UI</string>
+ <string>Meiryo</string>
+ <string>Menlo</string>
+ <string>MetaBold-Roman</string>
+ <string>MetaBook-Roman</string>
+ <string>MetaMedium-Roman</string>
+ <string>Microsoft Himalaya</string>
+ <string>Microsoft JhengHei</string>
+ <string>Microsoft New Tai Lue</string>
+ <string>Microsoft PhagsPa</string>
+ <string>Microsoft Sans Serif</string>
+ <string>Microsoft Tai Le</string>
+ <string>Microsoft Uighur</string>
+ <string>Microsoft YaHei</string>
+ <string>Microsoft Yi Baiti</string>
+ <string>MingLiU-ExtB</string>
+ <string>MingLiU</string>
+ <string>MingLiU_HKSCS-ExtB</string>
+ <string>MingLiU_HKSCS</string>
+ <string>Miriam Fixed</string>
+ <string>Miriam</string>
+ <string>Molengo</string>
+ <string>Monaco</string>
+ <string>Mongolian Baiti</string>
+ <string>MoolBoran</string>
+ <string>NSimSun</string>
+ <string>Narkisim</string>
+ <string>Neuton</string>
+ <string>Nina</string>
+ <string>Nova Cut</string>
+ <string>Nova Flat</string>
+ <string>Nova Oval</string>
+ <string>Nova Round</string>
+ <string>Nova Script</string>
+ <string>Nova Slim</string>
+ <string>Nova Square</string>
+ <string>NovaMono </string>
+ <string>Nyala</string>
+ <string>Open Sans</string>
+ <string>PMingLiU-ExtB</string>
+ <string>PMingLiU</string>
+ <string>PT Sans Caption</string>
+ <string>PT Sans Narrow</string>
+ <string>PT Sans</string>
+ <string>PT Serif Caption</string>
+ <string>PT Serif</string>
+ <string>Padauk</string>
+ <string>Palatino Linotype</string>
+ <string>Papyrus</string>
+ <string>Plantagenet Cherokee</string>
+ <string>Play</string>
+ <string>Pragmata</string>
+ <string>PragmataPro</string>
+ <string>Raavi</string>
+ <string>Reenie Beanie</string>
+ <string>Rod</string>
+ <string>Sakkal Majalla</string>
+ <string>Segoe Print</string>
+ <string>Segoe Script</string>
+ <string>Segoe UI Light</string>
+ <string>Segoe UI Semibold</string>
+ <string>Segoe UI Symbol</string>
+ <string>Segoe UI</string>
+ <string>Shonar Bangla</string>
+ <string>Shruti</string>
+ <string>SimHei</string>
+ <string>SimSun-ExtB</string>
+ <string>SimSun</string>
+ <string>Simplified Arabic Fixed</string>
+ <string>Simplified Arabic</string>
+ <string>Skia</string>
+ <string>Sylfaen</string>
+ <string>Symbol</string>
+ <string>TITUS Cyberbit Basic</string>
+ <string>Tahoma</string>
+ <string>Tangerine</string>
+ <string>Times New Roman</string>
+ <string>Times</string>
+ <string>Tinos</string>
+ <string>Traditional Arabic</string>
+ <string>Trebuchet MS</string>
+ <string>Tunga</string>
+ <string>Ubuntu Condensed</string>
+ <string>Ubuntu Mono</string>
+ <string>Ubuntu</string>
+ <string>Utsaah</string>
+ <string>Vani</string>
+ <string>Verdana</string>
+ <string>Vijaya</string>
+ <string>Vollkorn</string>
+ <string>Vrinda</string>
+ <string>Webdings</string>
+ <string>Wingdings</string>
+ <string>Yanone Kaffeesatz</string>
+ <string>Zapfino</string>
+ </test>
+ <edit name="font_type" mode="assign">
+ <string>TT Instructed Font</string>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: infinality, win7, winxp, linux -->
+
+ <match target="font">
+ <test name="font_type">
+ <string>NON TT Instructed Font</string>
+ </test>
+ <test name="qt_use_subpixel_positioning">
+ <bool>true</bool>
+ </test>
+ <edit name="autohint" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ <edit name="hinting" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="font_type">
+ <string>NON TT Instructed Font</string>
+ </test>
+ <test name="qt_use_subpixel_positioning">
+ <bool>false</bool>
+ </test>
+ <edit name="autohint" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintfull</const>
+ </edit>
+ <edit name="hinting" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: win98 -->
+
+ <match target="font">
+ <test name="font_type">
+ <string>NON TT Instructed Font</string>
+ </test>
+ <edit name="rgba" mode="assign">
+ <const>none</const>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="hinting" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: infinality, win7, winxp -->
+
+ <match target="font">
+ <test name="font_type">
+ <string>TT Instructed Font</string>
+ </test>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintfull</const>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>false</bool>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: linux -->
+
+ <match target="font">
+ <test name="font_type">
+ <string>TT Instructed Font</string>
+ </test>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: osx -->
+
+ <match target="font">
+ <test name="font_type">
+ <string>TT Instructed Font</string>
+ </test>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: osx2 -->
+
+ <match target="font">
+ <test name="font_type">
+ <string>TT Instructed Font</string>
+ </test>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintnone</const>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: win98 -->
+
+ <match target="font">
+ <test name="font_type" qual="any">
+ <string>TT Instructed Font</string>
+ </test>
+ <edit name="antialias" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintfull</const>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>false</bool>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: common -->
+
+ <!-- OVERRIDE SETTINGS -->
+ <!-- Monochrome BCI for these fonts (circa Windows 98) -->
+ <!-- This will make them look like crisp bitmap fonts. -->
+ <!-- This should only be used by fonts that contain good TrueType instructions -->
+ <match target="font">
+ <test name="family">
+ <string>Andale Mono</string>
+ <string>Anonymous Pro</string>
+ <string>Bitstream Vera Sans Mono</string>
+ <string>Courier New</string>
+ <string>DejaVu Sans Mono</string>
+ <string>Essential PragmataPro</string>
+ <string>Inconsolata</string>
+ <string>Liberation Mono</string>
+ <string>Lucida Console</string>
+ <string>Lucida Sans Typewriter</string>
+ <string>Monaco</string>
+ <string>Pragmata</string>
+ <string>PragmataPro</string>
+ <string>Ubuntu Mono</string>
+ </test>
+ <test name="bitmap_monospace">
+ <bool>true</bool>
+ </test>
+ <edit name="hinting" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintfull</const>
+ </edit>
+ <edit name="embeddedbitmap" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: common -->
+
+ <!-- OVERRIDE SETTINGS -->
+ <!-- Make these fonts use no antialiasing or hinting (circa DOS / X11) -->
+ <!-- This should only be used on TTF outline fonts made from traced bitmaps and/or containing embedded bitmaps -->
+ <match target="font">
+ <test name="family">
+ <string>ProFontWindows</string>
+ <string>ProggyCleanTT</string>
+ <string>ProggySquareTTSZ</string>
+ <string>ProggyTinyTTSZ</string>
+ <string>ProggyCleanTT CE</string>
+ <string>ProFont</string>
+ <string>Terminus</string>
+ <string>Terminus (TTF)</string>
+ <string>MonteCarlo</string>
+ </test>
+ <edit name="hintstyle" mode="assign">
+ <const>hintnone</const>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="hinting" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="prefer_outline" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="embeddedbitmap" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+
+ <!-- only allow certain sizes for outline fonts that were traced from bitmaps -->
+ <match target="pattern">
+ <test name="family">
+ <string>ProggyCleanTT</string>
+ <string>ProggyCleanTT CE</string>
+ <string>ProggySquareTTSZ</string>
+ <string>ProggyTinyTTSZ</string>
+ </test>
+ <test name="pixelsize" compare="not_eq">
+ <double>16</double>
+ </test>
+ <edit name="pixelsize" mode="assign">
+ <double>16</double>
+ </edit>
+ </match>
+
+ <match target="pattern">
+ <test name="family">
+ <string>ProFontWindows</string>
+ </test>
+ <test name="pixelsize" compare="not_eq">
+ <double>12</double>
+ </test>
+ <edit name="pixelsize" mode="assign">
+ <double>12</double>
+ </edit>
+ </match>
+
+ <match target="pattern">
+ <test name="family">
+ <string>MonteCarlo</string>
+ </test>
+ <test name="pixelsize" compare="not_eq">
+ <double>12</double>
+ </test>
+ <edit name="pixelsize" mode="assign">
+ <double>12</double>
+ </edit>
+ </match>
+
+ <!-- Don't display outlines for Terminus (TTF), just embedded bitmaps -->
+ <match target="pattern">
+ <test name="family">
+ <string>Terminus (TTF)</string>
+ </test>
+ <test name="pixelsize" compare="less">
+ <double>12</double>
+ </test>
+ <edit name="pixelsize" mode="assign">
+ <double>12</double>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Terminus (TTF)</string>
+ </test>
+ <test name="pixelsize" compare="eq">
+ <double>13</double>
+ </test>
+ <edit name="pixelsize" mode="assign">
+ <double>12</double>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Terminus (TTF)</string>
+ </test>
+ <test name="pixelsize" compare="eq">
+ <double>15</double>
+ </test>
+ <edit name="pixelsize" mode="assign">
+ <double>14</double>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Terminus (TTF)</string>
+ </test>
+ <test name="pixelsize" compare="eq">
+ <double>17</double>
+ </test>
+ <edit name="pixelsize" mode="assign">
+ <double>16</double>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Terminus (TTF)</string>
+ </test>
+ <test name="pixelsize" compare="eq">
+ <double>19</double>
+ </test>
+ <edit name="pixelsize" mode="assign">
+ <double>18</double>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Terminus (TTF)</string>
+ </test>
+ <test name="pixelsize" compare="eq">
+ <double>21</double>
+ </test>
+ <edit name="pixelsize" mode="assign">
+ <double>20</double>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Terminus (TTF)</string>
+ </test>
+ <test name="pixelsize" compare="eq">
+ <double>23</double>
+ </test>
+ <edit name="pixelsize" mode="assign">
+ <double>22</double>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Terminus (TTF)</string>
+ </test>
+ <test name="pixelsize" compare="eq">
+ <double>17</double>
+ </test>
+ <edit name="pixelsize" mode="assign">
+ <double>16</double>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Terminus (TTF)</string>
+ </test>
+ <test name="pixelsize" compare="less">
+ <double>28</double>
+ </test>
+ <test name="pixelsize" compare="more">
+ <double>24</double>
+ </test>
+ <edit name="pixelsize" mode="assign">
+ <double>24</double>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Terminus (TTF)</string>
+ </test>
+ <test name="pixelsize" compare="less">
+ <double>32</double>
+ </test>
+ <test name="pixelsize" compare="more">
+ <double>28</double>
+ </test>
+ <edit name="pixelsize" mode="assign">
+ <double>28</double>
+ </edit>
+ </match>
+ <match target="pattern">
+ <test name="family">
+ <string>Terminus (TTF)</string>
+ </test>
+ <test name="pixelsize" compare="more">
+ <double>32</double>
+ </test>
+ <edit name="pixelsize" mode="assign">
+ <double>32</double>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: infinality -->
+
+ <!-- Replace "Lucida Grande 9px bold with Lucida Sans Unicode -->
+ <match target="pattern">
+ <test name="family">
+ <string>Lucida Grande</string>
+ </test>
+ <test name="pixelsize" compare="eq">
+ <double>9</double>
+ </test>
+ <edit name="family" mode="prepend" binding="same">
+ <string>Lucida Sans Unicode</string>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: win98 -->
+
+ <!-- For Windows 98 do "smooth edges" for Bold Fonts over 14 px -->
+ <match target="font">
+ <test name="weight" compare="more">
+ <const>medium</const>
+ </test>
+ <test name="pixelsize" compare="more_eq">
+ <double>14</double>
+ </test>
+ <edit name="rgba" mode="assign">
+ <const>none</const>
+ </edit>
+ <edit name="hinting" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+ <!-- For Windows 98 do "smooth edges" for fonts above 17 px -->
+ <match target="font">
+ <test name="pixelsize" compare="more_eq">
+ <double>18</double>
+ </test>
+ <edit name="rgba" mode="assign">
+ <const>none</const>
+ </edit>
+ <edit name="hinting" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: common -->
+
+ <!-- OVERRIDE SETTINGS -->
+ <!-- Full autohint -->
+ <!-- Makes vertical/horizontal stems align to pixels, but is not true to the glyphs -->
+ <!-- Some glyphs may look forced into place, however they are very sharp -->
+ <!--<match target="font">
+ <test name="family">
+ <string>FONT NAME HERE</string>
+ </test>
+ <edit name="hinting" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintfull</const>
+ </edit>
+ </match>-->
+
+ <!-- OVERRIDE SETTINGS -->
+ <!-- Light autohint on italics -->
+ <!-- Use for anything that is full auto or TT hinted above -->
+ <!--<match target="font">
+ <test name="family">
+ <string>FONT NAME HERE</string>
+ </test>
+ <test target="pattern" name="slant" compare="not_eq">
+ <const>roman</const>
+ </test>
+ <edit name="hinting" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ </match>-->
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: common -->
+
+ <!-- ****************************************************************** -->
+ <!-- ***************** FORCED ARTIFICIAL ITALIC / BOLD **************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- "Unforced" artificial/italic already included in /etc/fonts/conf.d/ rules -->
+
+ <!-- Force artificial italic instead of the font's default italic -->
+ <!-- In rare cases this is more visually appealing -->
+ <!-- Set the flag -->
+ <!-- !!!! Somehow this breaks Qt unfortunately !!!! -->
+ <match target="pattern">
+ <test target="font" name="family">
+ <string>FONT NAME HERE</string>
+ </test>
+
+ <!-- match requests for non-roman face -->
+ <test name="slant" compare="not_eq">
+ <const>roman</const>
+ </test>
+
+ <!-- remember that this should be slanted -->
+ <edit name="fake_slant" mode="assign">
+ <bool>true</bool>
+ </edit>
+
+ <!--- change to match a roman face instead -->
+ <edit name="slant" mode="assign">
+ <const>roman</const>
+ </edit>
+ </match>
+
+ <!-- Force flagged fonts to have artificial oblique -->
+ <match target="font">
+ <!-- check to see if the font is roman -->
+ <test name="slant">
+ <const>roman</const>
+ </test>
+ <!-- look for fonts which were marked for fake obliquing -->
+ <test name="fake_slant">
+ <bool>true</bool>
+ </test>
+ <!-- multiply the matrix to slant the font -->
+ <edit name="matrix" mode="assign">
+ <times>
+ <name>matrix</name>
+ <matrix>
+ <double>1.0</double>
+ <double>0.2</double>
+ <double>0</double>
+ <double>1</double>
+ </matrix>
+ </times>
+ </edit>
+ <!-- pretend the font is oblique now -->
+ <edit name="slant" mode="assign">
+ <const>oblique</const>
+ </edit>
+ </match>
+
+
+ <!-- Force fake bold instead of the font's default bold -->
+ <!-- In rare cases this is more visually appealing -->
+ <!-- !!!! Somehow this breaks Qt unfortunately !!!! -->
+ <!-- Set the flag -->
+ <match target="pattern">
+ <test name="family">
+ <string>YOUR FONT HERE</string>
+ </test>
+
+ <!-- match requests for bold face -->
+ <test name="weight" compare="more">
+ <const>medium</const>
+ </test>
+
+ <!-- remember that this should be bolded -->
+ <edit name="fake_bold" mode="assign">
+ <bool>true</bool>
+ </edit>
+
+ <!--- change to match a medium weight instead -->
+ <edit name="weight" mode="assign">
+ <const>medium</const>
+ </edit>
+ </match>
+
+ <!-- Force flagged fonts to have artificial bold -->
+ <match target="font">
+ <!-- look for fonts which were marked for fake bolding -->
+ <test name="fake_bold">
+ <bool>true</bool>
+ </test>
+ <!-- Set the embolden flag -->
+ <edit name="embolden" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <!-- pretend the font is bold now -->
+ <edit name="weight" mode="assign">
+ <const>bold</const>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: win98 -->
+
+ <!-- Prevent BCI fonts in Win98 mode from getting artificial italic -->
+ <match target="font">
+ <test name="font_type">
+ <string>TT Instructed Font</string>
+ </test>
+ <!-- check to see if the font is roman -->
+ <test name="slant">
+ <const>roman</const>
+ </test>
+ <!-- match requests for non-roman face -->
+ <test target="pattern" name="slant" compare="not_eq">
+ <const>roman</const>
+ </test>
+ <!-- pretend the font is oblique now -->
+ <edit name="slant" mode="assign">
+ <const>oblique</const>
+ </edit>
+ </match>
+
+ <!-- Prevent BCI fonts in Win98 mode from getting artificial emboldened -->
+ <match target="font">
+ <test name="font_type">
+ <string>TT Instructed Font</string>
+ </test>
+ <!-- check to see if the font is just regular -->
+ <test name="weight" compare="less_eq">
+ <const>medium</const>
+ </test>
+ <!-- check to see if the pattern requests bold -->
+ <test target="pattern" name="weight" compare="more">
+ <const>medium</const>
+ </test>
+ <!-- pretend it's bold now -->
+ <edit name="weight" mode="assign">
+ <const>bold</const>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: infinality, win7, winxp -->
+
+ <!-- ****************************************************************** -->
+ <!-- *********** SELECTIVE RENDERING FOR CERTAIN SITUATIONS *********** -->
+ <!-- ****************************************************************** -->
+
+ <!-- All fonts should use slight hinting below 8.5 px -->
+ <match target="font">
+ <test name="pixelsize" compare="less">
+ <double>9</double>
+ </test>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+ <!-- These full hinted fonts should use slight hinting below 12 px -->
+ <match target="font">
+ <test name="family">
+ <string>Arial Black</string>
+ </test>
+ <test name="pixelsize" compare="less">
+ <double>12</double>
+ </test>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: infinality, win7, winxp, win98, linux -->
+
+ <!-- ****************************************************************** -->
+ <!-- *********** SELECTIVE RENDERING FOR CERTAIN SITUATIONS *********** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Use autohint on "Droid Sans / Mono" >= 19 -->
+ <match target="font">
+ <test name="family">
+ <string>Droid Sans Mono</string>
+ <string>Droid Sans</string>
+ </test>
+ <test name="pixelsize" compare="more_eq" >
+ <double>19</double>
+ </test>
+ <edit name="autohint" mode="assign" >
+ <bool>true</bool>
+ </edit>
+ </match>
+
+ <!-- These full hinted fonts should use slight hinting below 14 px -->
+ <match target="font">
+ <test name="family">
+ <string>Aquabase</string>
+ <string>Browallia New</string>
+ <string>BrowalliaUPC</string>
+ </test>
+ <test name="pixelsize" compare="less">
+ <double>14</double>
+ </test>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+ <!-- Italic Courier looks bad with BCI hinting -->
+ <match target="font">
+ <test name="family">
+ <string>Courier</string>
+ </test>
+ <test name="slant" compare="not_eq">
+ <const>roman</const>
+ </test>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+ <!-- Use BCI on Gentium >= 18 -->
+ <match target="font">
+ <test name="family">
+ <string>Gentium</string>
+ </test>
+ <test name="pixelsize" compare="more_eq" >
+ <double>18</double>
+ </test>
+ <edit name="autohint" mode="assign" >
+ <bool>false</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintfull</const>
+ </edit>
+ </match>
+
+ <!-- Use autohint on Gill Sans = 17 -->
+ <match target="font">
+ <test name="family">
+ <string>Gill Sans</string>
+ </test>
+ <test name="pixelsize" compare="eq" >
+ <double>17</double>
+ </test>
+ <edit name="autohint" mode="assign" >
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ </match>
+
+ <!-- Use autohint on Gill Sans = 18-19 italic -->
+ <match target="font">
+ <test name="family">
+ <string>Gill Sans</string>
+ </test>
+ <test name="slant" compare="not_eq">
+ <const>roman</const>
+ </test>
+ <test name="pixelsize" compare="eq" >
+ <double>18</double>
+ <double>19</double>
+ </test>
+ <edit name="autohint" mode="assign" >
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ </match>
+
+ <!-- Use autohint on Gill Sans = 11-12 bold -->
+ <match target="font">
+ <test name="family">
+ <string>Gill Sans</string>
+ </test>
+ <test name="pixelsize" compare="eq" >
+ <double>11</double>
+ <double>12</double>
+ </test>
+ <edit name="autohint" mode="assign" >
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ </match>
+
+ <!-- Use autohint on some Droid Sans Bold ppems -->
+ <match target="font">
+ <test name="family">
+ <string>Droid Sans</string>
+ </test>
+ <test name="pixelsize" compare="eq" >
+ <double>9</double>
+ <double>10</double>
+ <double>11</double>
+ <double>14</double>
+ </test>
+ <test name="weight" compare="more" >
+ <const>medium</const>
+ </test>
+ <edit name="autohint" mode="assign" >
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ </match>
+
+ <!-- Use autohint on some Ubuntu Mono ppems -->
+ <match target="font">
+ <test name="family">
+ <string>Ubuntu Mono</string>
+ </test>
+ <test name="pixelsize" compare="eq" >
+ <double>12</double>
+ <double>13</double>
+ </test>
+ <test name="weight" compare="more" >
+ <const>medium</const>
+ </test>
+ <edit name="autohint" mode="assign" >
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintslight</const>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: infinality, win7, winxp -->
+
+ <!-- ****************************************************************** -->
+ <!-- ************************ FINAL SETTINGS ************************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Use matrix settings to transform a font -->
+
+ <!-- Slightly stretch a font -->
+ <!-- Does not work with Google Chrome, but does in Firefox
+ <match target="font">
+ <test name="family">
+ <string>Some font</string>
+ </test>
+ <test name="weight" compare="less">
+ <const>bold</const>
+ </test>
+ <test name="pixelsize" compare="more_eq">
+ <double>9.5</double>
+ </test>
+ <test name="pixelsize" compare="less">
+ <double>10.5</double>
+ </test>
+ <edit name="matrix" mode="assign">
+ <times>
+ <name>matrix</name>
+ <matrix>
+ <double>1.1</double>
+ <double>0.0</double>
+ <double>0.0</double>
+ <double>1.0</double>
+ </matrix>
+ </times>
+ </edit>
+ </match> -->
+
+</fontconfig>
--- /dev/null
+<?xml version="1.0"?>
+<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
+<fontconfig>
+
+ <!-- ##Style: common -->
+
+ <!-- Prevent synthetic functions on bitmap / non-aa fonts.
+ This is done below by fooling fontconfig into thinking they are already
+ bold / italic.
+ -->
+
+ <match target="font">
+ <test name="slant">
+ <const>roman</const>
+ </test>
+ <test target="pattern" name="slant" compare="not_eq">
+ <const>roman</const>
+ </test>
+ <test name="scalable">
+ <bool>false</bool>
+ </test>
+ <edit name="slant" mode="assign">
+ <const>oblique</const>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="slant">
+ <const>roman</const>
+ </test>
+ <test target="pattern" name="slant" compare="not_eq">
+ <const>roman</const>
+ </test>
+ <test name="antialias">
+ <bool>false</bool>
+ </test>
+ <edit name="slant" mode="assign">
+ <const>oblique</const>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="weight" compare="less_eq">
+ <const>medium</const>
+ </test>
+ <test target="pattern" name="weight" compare="more">
+ <const>medium</const>
+ </test>
+ <test name="scalable">
+ <bool>false</bool>
+ </test>
+ <edit name="weight" mode="assign">
+ <const>bold</const>
+ </edit>
+ </match>
+
+ <match target="font">
+ <test name="weight" compare="less_eq">
+ <const>medium</const>
+ </test>
+ <test target="pattern" name="weight" compare="more">
+ <const>medium</const>
+ </test>
+ <test name="antialias">
+ <bool>false</bool>
+ </test>
+ <edit name="weight" mode="assign">
+ <const>bold</const>
+ </edit>
+ </match>
+
+
+ <!-- Prevent bold-ish fonts from being emboldened -->
+ <match target="font">
+ <test name="weight" compare="more_eq">
+ <const>semibold</const>
+ </test>
+ <test target="pattern" name="weight">
+ <const>bold</const>
+ </test>
+ <edit name="weight" mode="assign">
+ <const>bold</const>
+ </edit>
+ </match>
+
+ <!-- Prevent thin-ish fonts from being emboldened -->
+ <match target="font">
+ <test name="weight" compare="less">
+ <const>book</const>
+ </test>
+ <test target="pattern" name="weight">
+ <const>bold</const>
+ </test>
+ <edit name="weight" mode="assign">
+ <const>bold</const>
+ </edit>
+ </match>
+
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: infinality, win7, winxp, win98, linux -->
+
+ <!-- ****************************************************************** -->
+ <!-- ************** REJECT FONTS IN CERTAIN SITUATIONS **************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Inconsolata-Bold.otf looks like crap -->
+ <selectfont>
+ <rejectfont>
+ <pattern>
+ <patelt name="family" >
+ <string>Inconsolata</string>
+ </patelt>
+ <patelt name="weight" >
+ <const>bold</const>
+ </patelt>
+ </pattern>
+ </rejectfont>
+ </selectfont>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: debug -->
+
+ <!-- ****************************************************************** -->
+ <!-- ************************** DEBUGGING ***************************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Global Override for Debugging -->
+
+ <match target="font">
+ <edit name="rgba" mode="assign">
+ <const>rgb</const>
+ </edit>
+ <edit name="hinting" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="autohint" mode="assign">
+ <bool>false</bool>
+ </edit>
+ <edit name="antialias" mode="assign">
+ <bool>true</bool>
+ </edit>
+ <edit name="hintstyle" mode="assign">
+ <const>hintfull</const>
+ </edit>
+ <edit name="lcdfilter" mode="assign">
+ <const>lcddefault</const>
+ </edit>
+ </match>
+
+</fontconfig>
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- Choose an OS Rendering Style. This will determine B/W, grayscale,
+ or subpixel antialising and slight, full or no hinting and replacements (if set in next option) -->
+ <!-- Style should also be set in the infinality-settings.sh file, ususally in /etc/profile.d/ -->
+
+ <!-- Choose one of these options:
+ Infinality - subpixel AA, minimal replacements/tweaks, sans=Arial
+ Windows 7 - subpixel AA, sans=Arial
+ Windows XP - subpixel AA, sans=Arial
+ Windows 98 - B/W full hinting on TT fonts, grayscale AA for others, sans=Arial
+ OSX - Slight hinting, subpixel AA, sans=Helvetica Neue
+ OSX2 - No hinting, subpixel AA, sans=Helvetica Neue
+ Linux - subpixel AA, sans=DejaVu Sans
+
+ === Recommended Setup ===
+ Run ./infctl.sh script located in the current directory to set the style.
+
+ # ./infctl.sh setstyle
+
+ === Manual Setup ===
+ See the infinality/styles.conf.avail/ directory for all options. To enable
+ a different style, remove the symlink "conf.d" and link to another style:
+
+ # rm conf.d
+ # ln -s styles.conf.avail/win7 conf.d
+ -->
+
+ <!-- Uncomment this to reject all bitmap fonts -->
+ <!-- Make sure to run this as root if having problems: fc-cache -f -->
+ <!--
+ <selectfont>
+ <rejectfont>
+ <pattern>
+ <patelt name="scalable" >
+ <bool>false</bool>
+ </patelt>
+ </pattern>
+ </rejectfont>
+ </selectfont>
+ -->
+
+ <!-- Ban Type-1 fonts because they render poorly -->
+ <!-- Comment this out to allow all Type 1 fonts -->
+ <selectfont>
+ <rejectfont>
+ <pattern>
+ <patelt name="fontformat" >
+ <string>Type 1</string>
+ </patelt>
+ </pattern>
+ </rejectfont>
+ </selectfont>
+
+ <!-- Globally use embedded bitmaps in fonts like Calibri? -->
+ <match target="font" >
+ <edit name="embeddedbitmap" mode="assign">
+ <bool>false</bool>
+ </edit>
+ </match>
+
+ <!-- Substitute truetype fonts in place of bitmap ones? -->
+ <match target="pattern" >
+ <edit name="prefer_outline" mode="assign">
+ <bool>true</bool>
+ </edit>
+ </match>
+
+ <!-- Make (some) monospace/coding TTF fonts render as bitmaps? -->
+ <!-- courier new, andale mono, monaco, etc. -->
+ <match target="pattern" >
+ <edit name="bitmap_monospace" mode="assign">
+ <bool>false</bool>
+ </edit>
+ </match>
+
+ <!-- Force autohint always -->
+ <!-- Useful for debugging and for free software purists -->
+ <match target="font">
+ <edit name="force_autohint" mode="assign">
+ <bool>false</bool>
+ </edit>
+ </match>
+
+ <!-- Set DPI. dpi should be set in ~/.Xresources to 96 -->
+ <!-- Setting to 72 here makes the px to pt conversions work better (Chrome) -->
+ <!-- Some may need to set this to 96 though -->
+ <match target="pattern">
+ <edit name="dpi" mode="assign">
+ <double>72</double>
+ </edit>
+ </match>
+
+ <!-- Use Qt subpixel positioning on autohinted fonts? -->
+ <!-- This only applies to Qt and autohinted fonts. Qt determines subpixel positioning based on hintslight vs. hintfull, -->
+ <!-- however infinality patches force slight hinting inside freetype, so this essentially just fakes out Qt. -->
+ <!-- Should only be set to true if you are not doing any stem alignment or fitting in environment variables -->
+ <match target="pattern" >
+ <edit name="qt_use_subpixel_positioning" mode="assign">
+ <bool>false</bool>
+ </edit>
+ </match>
+
+ <!-- Run infctl.sh or change the symlink in current directory instead of modifying this -->
+ <include>infinality/conf.d</include>
+
+</fontconfig>
--- /dev/null
+../../conf.src/20-fix-cantarell.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/42-repl-global.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/43-repl-tt-traced-bitmap.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/44-repl-corrective.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-non-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-monospace-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-traced-bitmap-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/65-override.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/70-forced-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/90-no-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/99-debug.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/20-aliases-default-inf.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/20-fix-cantarell.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/21-aliases-wine-win7-inf.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/30-non-latin-inf-win.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/41-repl-os-inf.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/42-repl-global.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/43-repl-tt-traced-bitmap.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/44-repl-corrective.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/50-base-rendering-inf-osx-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-non-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/61-group-non-tt-rendering-inf-7-xp-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/61-group-tt-rendering-inf-7-xp.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-monospace-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-traced-bitmap-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/64-override-inf.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/65-override.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/70-forced-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/80-selective-rendering-inf-7-xp.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/80-selective-rendering-inf-win-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/81-final-rendering-inf-7-xp.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/90-no-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/90-reject.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/20-aliases-default-linux.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/20-fix-cantarell.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/21-aliases-wine-linux.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/30-non-latin-osx-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/41-repl-os-linux.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/42-repl-global.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/43-repl-tt-traced-bitmap.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/44-repl-corrective.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/50-base-rendering-inf-osx-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-non-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/61-group-non-tt-rendering-inf-7-xp-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/61-group-tt-rendering-linux.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-monospace-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-traced-bitmap-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/65-override.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/70-forced-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/80-selective-rendering-inf-win-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/90-no-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/90-reject.conf
\ No newline at end of file
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: nyx (based on infinality) -->
+
+ <!-- ****************************************************************** -->
+ <!-- *************************** ALIASES ****************************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Default fonts -->
+ <alias>
+ <family>sans-serif</family>
+ <prefer>
+ <family>Arimo</family>
+ </prefer>
+ </alias>
+ <alias>
+ <family>serif</family>
+ <prefer>
+ <family>Tinos</family>
+ </prefer>
+ </alias>
+ <alias>
+ <family>monospace</family>
+ <prefer>
+ <family>Cousine</family>
+ </prefer>
+ </alias>
+
+</fontconfig>
--- /dev/null
+../../conf.src/20-fix-cantarell.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/21-aliases-wine-win7-inf.conf
\ No newline at end of file
--- /dev/null
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+ <!-- ##Style: nyx (based on osx/lin) -->
+
+ <!-- ****************************************************************** -->
+ <!-- *********************** FONT PRIORITIES ************************** -->
+ <!-- ****************************************************************** -->
+
+ <!-- Non-latin fonts - Linux Appearance -->
+
+ <alias>
+ <family>serif</family>
+ <accept>
+ <family>Liberation Serif</family>
+ <family>DejaVu Serif</family>
+ <family>FreeSerif</family>
+ <family>Times New Roman</family>
+ <family>Batang</family>
+ <family>DFKai-SB</family>
+ <family>EucrosiaUPC</family>
+ <family>JasmineUPC</family>
+ <family>KaiTi</family>
+ <family>Kartika</family>
+ <family>KodchiangUPC</family>
+ <family>MingLiU</family>
+ <family>MS Mincho</family>
+ <family>SimSun</family>
+ <family>Sylfaen</family>
+ <family>DaunPenh</family>
+ <family>MV Boli</family>
+ <family>Iskoola Pota</family>
+ <family>Latha</family>
+ <family>Microsoft Himalaya</family>
+ <family>Mongolian Baiti</family>
+ <family>Shruti</family>
+ <family>Cardo</family>
+ <family>MPH 2B Damase</family>
+ <family>Georgia</family>
+ <family>Times</family>
+ <family>Palatino Linotype</family>
+ </accept>
+ </alias>
+ <alias>
+ <family>sans-serif</family>
+ <accept>
+ <family>Liberation Sans</family>
+ <family>Arial</family>
+ <family>DejaVu Sans</family>
+ <family>Meiryo</family>
+ <family>Arabic Typesetting</family>
+ <family>DokChampa</family>
+ <family>Malgun Gothic</family>
+ <family>Estrangelo Edessa</family>
+ <family>Gautami</family>
+ <family>Iskoola Pota</family>
+ <family>Microsoft YaHei</family>
+ <family>Mangal</family>
+ <family>Microsoft JhengHei</family>
+ <family>Vrinda</family>
+ <family>Plantagenet Cherokee</family>
+ <family>Raavi</family>
+ <family>Nyala</family>
+ <family>Tunga</family>
+ <family>Kartika</family>
+ <family>MV Boli</family>
+ <family>DaunPenh</family>
+ <family>Iskoola Pota</family>
+ <family>Latha</family>
+ <family>Microsoft Himalaya</family>
+ <family>Mongolian Baiti</family>
+ <family>Shruti</family>
+ <family>Skeirs</family>
+ <family>Cardo</family>
+ <family>MPH 2B Damase</family>
+ <family>Helvetica Neue</family>
+ <family>Helvetica</family>
+ <family>Tahoma</family>
+ <family>Arial Unicode MS</family>
+ </accept>
+ </alias>
+ <alias>
+ <family>monospace</family>
+ <accept>
+ <family>Liberation Mono</family>
+ <family>DejaVu Sans Mono</family>
+ <family>Droid Sans Mono</family>
+ <family>Consolas</family>
+ <family>Inconsolata</family>
+ <family>Andale Mono</family>
+ <family>Courier New</family>
+ <family>FreeMono</family>
+ <family>Microsoft JhengHei</family>
+ <family>Microsoft YaHei</family>
+ <family>MPH 2B Damase</family>
+ <family>Courier</family>
+ </accept>
+ </alias>
+ <alias>
+ <family>fantasy</family>
+ <accept>
+ <family>Impact</family>
+ <family>Copperplate Gothic Std</family>
+ <family>Cooper Std</family>
+ <family>Bauhaus Std</family>
+ </accept>
+ </alias>
+ <alias>
+ <family>cursive</family>
+ <accept>
+ <family>ITC Zapf Chancery Std</family>
+ <family>Zapfino</family>
+ <family>Comic Sans MS</family>
+ <family>Chalkboard</family>
+ <family>Chalkduster</family>
+ </accept>
+ </alias>
+
+</fontconfig>
--- /dev/null
+../../conf.src/43-repl-terminus.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/44-repl-corrective.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/50-base-rendering-inf-osx-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-non-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/64-override-inf.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/65-override.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/80-selective-rendering-inf-7-xp.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/80-selective-rendering-inf-win-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/20-aliases-default-osx.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/20-fix-cantarell.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/21-aliases-wine-osx.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/30-non-latin-osx-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/41-repl-os-osx.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/42-repl-global.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/43-repl-tt-traced-bitmap.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/44-repl-corrective.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/50-base-rendering-inf-osx-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/50-base-rendering-osx2.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-non-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/61-group-tt-rendering-osx.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/61-group-tt-rendering-osx2.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-monospace-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-traced-bitmap-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/65-override.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/70-forced-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/90-no-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/20-aliases-default-osx.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/20-fix-cantarell.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/21-aliases-wine-osx.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/30-non-latin-osx-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/41-repl-os-osx.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/42-repl-global.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/43-repl-tt-traced-bitmap.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/44-repl-corrective.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/50-base-rendering-osx2.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-non-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/61-group-tt-rendering-osx2.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-monospace-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-traced-bitmap-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/65-override.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/70-forced-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/90-no-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/20-aliases-default-win.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/20-fix-cantarell.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/21-aliases-wine-win7-inf.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/30-non-latin-inf-win.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/41-repl-os-win.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/42-repl-global.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/43-repl-tt-traced-bitmap.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/44-repl-corrective.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/50-base-rendering-win7-winxp.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-non-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/61-group-non-tt-rendering-inf-7-xp-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/61-group-tt-rendering-inf-7-xp.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-monospace-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-traced-bitmap-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/65-override.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/70-forced-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/80-selective-rendering-inf-7-xp.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/80-selective-rendering-inf-win-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/81-final-rendering-inf-7-xp.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/90-no-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/90-reject.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/20-aliases-default-win.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/20-fix-cantarell.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/21-aliases-wine-win98.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/30-non-latin-inf-win.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/41-repl-os-win.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/42-repl-global.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/43-repl-tt-traced-bitmap.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/44-repl-corrective.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/50-base-rendering-win98.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-non-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/61-group-non-tt-rendering-win98.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/61-group-tt-rendering-win98.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-monospace-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-traced-bitmap-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/64-override-win98.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/65-override.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/70-forced-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/71-forced-synthetic-win98.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/80-selective-rendering-inf-win-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/90-no-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/90-reject.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/20-aliases-default-win.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/20-fix-cantarell.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/21-aliases-wine-winxp.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/30-non-latin-inf-win.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/41-repl-os-win.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/42-repl-global.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/43-repl-tt-traced-bitmap.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/44-repl-corrective.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/50-base-rendering-win7-winxp.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-non-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/60-group-tt-fonts.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/61-group-non-tt-rendering-inf-7-xp-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/61-group-tt-rendering-inf-7-xp.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-monospace-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/62-tt-traced-bitmap-rendering.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/65-override.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/70-forced-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/80-selective-rendering-inf-7-xp.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/80-selective-rendering-inf-win-lin.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/81-final-rendering-inf-7-xp.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/90-no-synthetic.conf
\ No newline at end of file
--- /dev/null
+../../conf.src/90-reject.conf
\ No newline at end of file
</dir>
</dir>
<dir name="totem">
- <entry name="remember_position" mtime="1357308737" schema="/schemas/apps/totem/remember_position"/>
- <entry name="autoload_chapters" mtime="1357308737" schema="/schemas/apps/totem/autoload_chapters"/>
- <entry name="autoload_subtitles" mtime="1357308737" schema="/schemas/apps/totem/autoload_subtitles"/>
- <entry name="disable_keyboard_shortcuts" mtime="1357308737" schema="/schemas/apps/disable_keyboard_shortcuts"/>
- <entry name="disable_user_plugins" mtime="1357308737" schema="/schemas/apps/totem/disable_user_plugins"/>
- <entry name="screenshot_save_path" mtime="1357308737" schema="/schemas/apps/totem/screenshot_save_path"/>
- <entry name="open_path" mtime="1357308737" schema="/schemas/apps/totem/open_path"/>
- <entry name="subtitle_encoding" mtime="1357308737" schema="/schemas/apps/totem/subtitle_encoding"/>
- <entry name="subtitle_font" mtime="1357308737" schema="/schemas/apps/totem/subtitle_font"/>
- <entry name="network-buffer-threshold" mtime="1357308737" schema="/schemas/apps/totem/network-buffer-threshold"/>
- <entry name="visual_quality" mtime="1357308737" schema="/schemas/apps/totem/visual_quality"/>
- <entry name="audio_output_type" mtime="1357308737" schema="/schemas/apps/totem/audio_output_type"/>
- <entry name="debug" mtime="1357308737" schema="/schemas/apps/totem/debug"/>
- <entry name="disable_deinterlacing" mtime="1357308737" schema="/schemas/apps/totem/disable_deinterlacing"/>
- <entry name="shuffle" mtime="1357308737" schema="/schemas/apps/totem/shuffle"/>
- <entry name="repeat" mtime="1357308737" schema="/schemas/apps/totem/repeat"/>
- <entry name="connection_speed" mtime="1357308737" schema="/schemas/apps/totem/connection_speed"/>
- <entry name="auto_resize" mtime="1357308737" schema="/schemas/apps/totem/auto_resize"/>
- <entry name="saturation" mtime="1357308737" schema="/schemas/apps/totem/saturation"/>
- <entry name="hue" mtime="1357308737" schema="/schemas/apps/totem/hue"/>
- <entry name="contrast" mtime="1357308737" schema="/schemas/apps/totem/contrast"/>
- <entry name="brightness" mtime="1357308737" schema="/schemas/apps/totem/brightness"/>
- <entry name="visual" mtime="1357308737" schema="/schemas/apps/totem/visual"/>
- <entry name="show_vfx" mtime="1357308737" schema="/schemas/apps/totem/show_vfx"/>
- <entry name="lock_screensaver_on_audio" mtime="1357308737" schema="/schemas/apps/totem/lock_screensaver_on_audio"/>
+ <entry name="remember_position" mtime="1359455567" schema="/schemas/apps/totem/remember_position"/>
+ <entry name="autoload_chapters" mtime="1359455567" schema="/schemas/apps/totem/autoload_chapters"/>
+ <entry name="autoload_subtitles" mtime="1359455567" schema="/schemas/apps/totem/autoload_subtitles"/>
+ <entry name="disable_keyboard_shortcuts" mtime="1359455567" schema="/schemas/apps/disable_keyboard_shortcuts"/>
+ <entry name="disable_user_plugins" mtime="1359455567" schema="/schemas/apps/totem/disable_user_plugins"/>
+ <entry name="screenshot_save_path" mtime="1359455567" schema="/schemas/apps/totem/screenshot_save_path"/>
+ <entry name="open_path" mtime="1359455567" schema="/schemas/apps/totem/open_path"/>
+ <entry name="subtitle_encoding" mtime="1359455567" schema="/schemas/apps/totem/subtitle_encoding"/>
+ <entry name="subtitle_font" mtime="1359455567" schema="/schemas/apps/totem/subtitle_font"/>
+ <entry name="network-buffer-threshold" mtime="1359455567" schema="/schemas/apps/totem/network-buffer-threshold"/>
+ <entry name="visual_quality" mtime="1359455567" schema="/schemas/apps/totem/visual_quality"/>
+ <entry name="audio_output_type" mtime="1359455567" schema="/schemas/apps/totem/audio_output_type"/>
+ <entry name="debug" mtime="1359455567" schema="/schemas/apps/totem/debug"/>
+ <entry name="disable_deinterlacing" mtime="1359455567" schema="/schemas/apps/totem/disable_deinterlacing"/>
+ <entry name="shuffle" mtime="1359455567" schema="/schemas/apps/totem/shuffle"/>
+ <entry name="repeat" mtime="1359455567" schema="/schemas/apps/totem/repeat"/>
+ <entry name="connection_speed" mtime="1359455567" schema="/schemas/apps/totem/connection_speed"/>
+ <entry name="auto_resize" mtime="1359455567" schema="/schemas/apps/totem/auto_resize"/>
+ <entry name="saturation" mtime="1359455567" schema="/schemas/apps/totem/saturation"/>
+ <entry name="hue" mtime="1359455567" schema="/schemas/apps/totem/hue"/>
+ <entry name="contrast" mtime="1359455567" schema="/schemas/apps/totem/contrast"/>
+ <entry name="brightness" mtime="1359455567" schema="/schemas/apps/totem/brightness"/>
+ <entry name="visual" mtime="1359455567" schema="/schemas/apps/totem/visual"/>
+ <entry name="show_vfx" mtime="1359455567" schema="/schemas/apps/totem/show_vfx"/>
+ <entry name="lock_screensaver_on_audio" mtime="1359455567" schema="/schemas/apps/totem/lock_screensaver_on_audio"/>
</dir>
<dir name="control-center">
<entry name="cc_exit_shell_on_action_upgrade_uninstall" mtime="1326800557" schema="/schemas/apps/control-center/cc_exit_shell_on_action_upgrade_uninstall"/>
<entry name="enable" mtime="1342526497" schema="/schemas/desktop/gnome/thumbnailers/image@vnd.djvu/enable"/>
</dir>
<dir name="application@x-flac">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-flac/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-flac/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-flac/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-flac/enable"/>
</dir>
<dir name="audio@x-xm">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-xm/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-xm/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-xm/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-xm/enable"/>
</dir>
<dir name="audio@x-vorbis@ogg">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-vorbis@ogg/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-vorbis@ogg/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-vorbis@ogg/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-vorbis@ogg/enable"/>
</dir>
<dir name="audio@x-vorbis">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-vorbis/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-vorbis/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-vorbis/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-vorbis/enable"/>
</dir>
<dir name="audio@x-wavpack">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-wavpack/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-wavpack/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-wavpack/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-wavpack/enable"/>
</dir>
<dir name="audio@x-wav">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-wav/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-wav/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-wav/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-wav/enable"/>
</dir>
<dir name="audio@x-tta">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-tta/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-tta/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-tta/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-tta/enable"/>
</dir>
<dir name="audio@x-speex">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-speex/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-speex/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-speex/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-speex/enable"/>
</dir>
<dir name="audio@x-sbc">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-sbc/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-sbc/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-sbc/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-sbc/enable"/>
</dir>
<dir name="audio@x-real-audio">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-real-audio/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-real-audio/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-real-audio/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-real-audio/enable"/>
</dir>
<dir name="audio@x-realaudio">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-realaudio/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-realaudio/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-realaudio/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-realaudio/enable"/>
</dir>
<dir name="audio@x-pn-windows-acm">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-windows-acm/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-windows-acm/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-windows-acm/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-windows-acm/enable"/>
</dir>
<dir name="audio@x-pn-wav">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-wav/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-wav/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-wav/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-wav/enable"/>
</dir>
<dir name="audio@x-pn-au">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-au/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-au/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-au/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-au/enable"/>
</dir>
<dir name="audio@x-pn-aiff">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-aiff/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-aiff/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-aiff/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-aiff/enable"/>
</dir>
<dir name="audio@x-musepack">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-musepack/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-musepack/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-musepack/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-musepack/enable"/>
</dir>
<dir name="audio@x-ms-wma">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-wma/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-wma/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-wma/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-wma/enable"/>
</dir>
<dir name="audio@x-ms-wax">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-wax/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-wax/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-wax/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-wax/enable"/>
</dir>
<dir name="audio@x-ms-asx">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-asx/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-asx/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-asx/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-asx/enable"/>
</dir>
<dir name="audio@x-ms-asf">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-asf/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-asf/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-asf/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ms-asf/enable"/>
</dir>
<dir name="audio@x-mpeg">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-mpeg/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-mpeg/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-mpeg/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-mpeg/enable"/>
</dir>
<dir name="audio@x-mp3">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-mp3/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-mp3/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-mp3/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-mp3/enable"/>
</dir>
<dir name="audio@x-mod">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-mod/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-mod/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-mod/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-mod/enable"/>
</dir>
<dir name="audio@x-matroska">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-matroska/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-matroska/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-matroska/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-matroska/enable"/>
</dir>
<dir name="audio@x-m4a">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-m4a/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-m4a/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-m4a/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-m4a/enable"/>
</dir>
<dir name="audio@x-it">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-it/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-it/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-it/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-it/enable"/>
</dir>
<dir name="audio@x-gsm">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-gsm/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-gsm/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-gsm/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-gsm/enable"/>
</dir>
<dir name="audio@x-flac">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-flac/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-flac/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-flac/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-flac/enable"/>
</dir>
<dir name="audio@x-ape">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ape/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ape/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ape/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-ape/enable"/>
</dir>
<dir name="audio@x-aiff">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-aiff/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-aiff/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-aiff/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-aiff/enable"/>
</dir>
<dir name="audio@vnd.rn-realaudio">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@vnd.rn-realaudio/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@vnd.rn-realaudio/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@vnd.rn-realaudio/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@vnd.rn-realaudio/enable"/>
</dir>
<dir name="audio@prs.sid">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@prs.sid/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@prs.sid/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@prs.sid/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@prs.sid/enable"/>
</dir>
<dir name="audio@ogg">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@ogg/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@ogg/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@ogg/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@ogg/enable"/>
</dir>
<dir name="audio@mpeg">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@mpeg/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@mpeg/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@mpeg/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@mpeg/enable"/>
</dir>
<dir name="audio@mp4">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@mp4/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@mp4/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@mp4/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@mp4/enable"/>
</dir>
<dir name="audio@midi">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@midi/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@midi/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@midi/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@midi/enable"/>
</dir>
<dir name="audio@basic">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@basic/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@basic/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@basic/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@basic/enable"/>
</dir>
<dir name="audio@AMR-WB">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@AMR-WB/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@AMR-WB/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@AMR-WB/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@AMR-WB/enable"/>
</dir>
<dir name="audio@AMR">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@AMR/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@AMR/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@AMR/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@AMR/enable"/>
</dir>
<dir name="audio@ac3">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@ac3/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@ac3/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@ac3/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@ac3/enable"/>
</dir>
<dir name="audio@3gpp">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@3gpp/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@3gpp/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@3gpp/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@3gpp/enable"/>
</dir>
<dir name="audio@x-pn-realaudio">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-realaudio/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-realaudio/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-realaudio/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/audio@x-pn-realaudio/enable"/>
</dir>
<dir name="video@x-totem-stream">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-totem-stream/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-totem-stream/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-totem-stream/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-totem-stream/enable"/>
</dir>
<dir name="video@x-theora@ogg">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-theora@ogg/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-theora@ogg/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-theora@ogg/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-theora@ogg/enable"/>
</dir>
<dir name="video@x-ogm@ogg">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-ogm@ogg/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-ogm@ogg/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-ogm@ogg/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-ogm@ogg/enable"/>
</dir>
<dir name="video@x-nsv">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-nsv/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-nsv/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-nsv/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-nsv/enable"/>
</dir>
<dir name="video@x-ms-wvx">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wvx/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wvx/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wvx/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wvx/enable"/>
</dir>
<dir name="video@x-ms-wmx">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wmx/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wmx/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wmx/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wmx/enable"/>
</dir>
<dir name="video@x-ms-wmv">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wmv/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wmv/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wmv/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wmv/enable"/>
</dir>
<dir name="video@x-ms-wm">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wm/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wm/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wm/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-wm/enable"/>
</dir>
<dir name="video@x-msvideo">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-msvideo/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-msvideo/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-msvideo/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-msvideo/enable"/>
</dir>
<dir name="video@x-ms-asx">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-asx/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-asx/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-asx/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-asx/enable"/>
</dir>
<dir name="video@x-ms-asf">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-asf/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-asf/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-asf/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-ms-asf/enable"/>
</dir>
<dir name="video@x-mpeg">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-mpeg/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-mpeg/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-mpeg/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-mpeg/enable"/>
</dir>
<dir name="video@x-matroska">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-matroska/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-matroska/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-matroska/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-matroska/enable"/>
</dir>
<dir name="video@x-m4v">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-m4v/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-m4v/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-m4v/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-m4v/enable"/>
</dir>
<dir name="video@x-flv">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-flv/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-flv/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-flv/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-flv/enable"/>
</dir>
<dir name="video@x-flic">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-flic/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-flic/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-flic/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-flic/enable"/>
</dir>
<dir name="video@x-fli">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-fli/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-fli/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-fli/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-fli/enable"/>
</dir>
<dir name="video@x-flc">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-flc/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-flc/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-flc/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-flc/enable"/>
</dir>
<dir name="video@x-avi">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-avi/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-avi/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-avi/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-avi/enable"/>
</dir>
<dir name="video@x-anim">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-anim/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@x-anim/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-anim/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@x-anim/enable"/>
</dir>
<dir name="video@webm">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@webm/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@webm/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@webm/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@webm/enable"/>
</dir>
<dir name="video@vnd.vivo">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@vnd.vivo/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@vnd.vivo/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@vnd.vivo/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@vnd.vivo/enable"/>
</dir>
<dir name="video@vnd.rn-realvideo">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@vnd.rn-realvideo/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@vnd.rn-realvideo/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@vnd.rn-realvideo/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@vnd.rn-realvideo/enable"/>
</dir>
<dir name="video@vnd.divx">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@vnd.divx/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@vnd.divx/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@vnd.divx/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@vnd.divx/enable"/>
</dir>
<dir name="video@vivo">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@vivo/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@vivo/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@vivo/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@vivo/enable"/>
</dir>
<dir name="video@quicktime">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@quicktime/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@quicktime/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@quicktime/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@quicktime/enable"/>
</dir>
<dir name="video@ogg">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@ogg/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@ogg/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@ogg/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@ogg/enable"/>
</dir>
<dir name="video@msvideo">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@msvideo/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@msvideo/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@msvideo/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@msvideo/enable"/>
</dir>
<dir name="video@mpeg">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@mpeg/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@mpeg/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@mpeg/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@mpeg/enable"/>
</dir>
<dir name="video@mp4v-es">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@mp4v-es/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@mp4v-es/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@mp4v-es/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@mp4v-es/enable"/>
</dir>
<dir name="video@mp4">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@mp4/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@mp4/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@mp4/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@mp4/enable"/>
</dir>
<dir name="video@mp2t">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@mp2t/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@mp2t/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@mp2t/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@mp2t/enable"/>
</dir>
<dir name="video@flv">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@flv/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@flv/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@flv/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@flv/enable"/>
</dir>
<dir name="video@fli">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@fli/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@fli/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@fli/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@fli/enable"/>
</dir>
<dir name="video@dv">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@dv/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@dv/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@dv/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@dv/enable"/>
</dir>
<dir name="video@3gpp">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@3gpp/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/video@3gpp/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@3gpp/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/video@3gpp/enable"/>
</dir>
<dir name="text@x-google-video-pointer">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/text@x-google-video-pointer/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/text@x-google-video-pointer/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/text@x-google-video-pointer/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/text@x-google-video-pointer/enable"/>
</dir>
<dir name="misc@ultravox">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/misc@ultravox/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/misc@ultravox/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/misc@ultravox/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/misc@ultravox/enable"/>
</dir>
<dir name="image@x-pict">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/image@x-pict/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/image@x-pict/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/image@x-pict/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/image@x-pict/enable"/>
</dir>
<dir name="image@vnd.rn-realpix">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/image@vnd.rn-realpix/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/image@vnd.rn-realpix/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/image@vnd.rn-realpix/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/image@vnd.rn-realpix/enable"/>
</dir>
<dir name="application@x-shorten">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-shorten/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-shorten/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-shorten/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-shorten/enable"/>
</dir>
<dir name="application@x-quicktimeplayer">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-quicktimeplayer/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-quicktimeplayer/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-quicktimeplayer/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-quicktimeplayer/enable"/>
</dir>
<dir name="application@x-ogg">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-ogg/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-ogg/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-ogg/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-ogg/enable"/>
</dir>
<dir name="application@x-netshow-channel">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-netshow-channel/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-netshow-channel/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-netshow-channel/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-netshow-channel/enable"/>
</dir>
<dir name="application@x-matroska">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-matroska/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-matroska/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-matroska/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-matroska/enable"/>
</dir>
<dir name="application@x-flash-video">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-flash-video/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-flash-video/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-flash-video/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-flash-video/enable"/>
</dir>
<dir name="application@x-extension-mp4">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-extension-mp4/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-extension-mp4/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-extension-mp4/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-extension-mp4/enable"/>
</dir>
<dir name="application@x-extension-m4a">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-extension-m4a/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@x-extension-m4a/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-extension-m4a/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@x-extension-m4a/enable"/>
</dir>
<dir name="application@vnd.rn-realmedia">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@vnd.rn-realmedia/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@vnd.rn-realmedia/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@vnd.rn-realmedia/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@vnd.rn-realmedia/enable"/>
</dir>
<dir name="application@vnd.ms-wpl">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@vnd.ms-wpl/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@vnd.ms-wpl/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@vnd.ms-wpl/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@vnd.ms-wpl/enable"/>
</dir>
<dir name="application@sdp">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@sdp/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@sdp/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@sdp/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@sdp/enable"/>
</dir>
<dir name="application@ram">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@ram/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@ram/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@ram/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@ram/enable"/>
</dir>
<dir name="application@ogg">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@ogg/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@ogg/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@ogg/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@ogg/enable"/>
</dir>
<dir name="application@mxf">
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@mxf/command"/>
- <entry name="enable" mtime="1357308737" schema="/schemas/desktop/gnome/thumbnailers/application@mxf/enable"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@mxf/command"/>
+ <entry name="enable" mtime="1359455568" schema="/schemas/desktop/gnome/thumbnailers/application@mxf/enable"/>
</dir>
<dir name="application@x-font-otf">
<entry name="enable" mtime="1326800557" schema="/schemas/desktop/gnome/thumbnailers/application@x-font-otf/enable"/>
<entry name="enabled" mtime="1357303705" schema="/schemas/desktop/gnome/url-handlers/gg/enabled"/>
</dir>
<dir name="icyx">
- <entry name="enabled" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/icyx/enabled"/>
- <entry name="needs_terminal" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/icyx/needs_terminal"/>
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/icyx/command"/>
+ <entry name="enabled" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/icyx/enabled"/>
+ <entry name="needs_terminal" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/icyx/needs_terminal"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/icyx/command"/>
</dir>
<dir name="icy">
- <entry name="enabled" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/icy/enabled"/>
- <entry name="needs_terminal" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/icy/needs_terminal"/>
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/icy/command"/>
+ <entry name="enabled" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/icy/enabled"/>
+ <entry name="needs_terminal" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/icy/needs_terminal"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/icy/command"/>
</dir>
<dir name="uvox">
- <entry name="enabled" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/uvox/enabled"/>
- <entry name="needs_terminal" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/uvox/needs_terminal"/>
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/uvox/command"/>
+ <entry name="enabled" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/uvox/enabled"/>
+ <entry name="needs_terminal" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/uvox/needs_terminal"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/uvox/command"/>
</dir>
<dir name="mmsh">
- <entry name="enabled" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/mmsh/enabled"/>
- <entry name="needs_terminal" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/mmsh/needs_terminal"/>
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/mmsh/command"/>
+ <entry name="enabled" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/mmsh/enabled"/>
+ <entry name="needs_terminal" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/mmsh/needs_terminal"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/mmsh/command"/>
</dir>
<dir name="rtsp">
- <entry name="enabled" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/rtsp/enabled"/>
- <entry name="needs_terminal" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/rtsp/needs_terminal"/>
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/rtsp/command"/>
+ <entry name="enabled" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/rtsp/enabled"/>
+ <entry name="needs_terminal" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/rtsp/needs_terminal"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/rtsp/command"/>
</dir>
<dir name="rtp">
- <entry name="enabled" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/rtp/enabled"/>
- <entry name="needs_terminal" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/rtp/needs_terminal"/>
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/rtp/command"/>
+ <entry name="enabled" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/rtp/enabled"/>
+ <entry name="needs_terminal" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/rtp/needs_terminal"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/rtp/command"/>
</dir>
<dir name="net">
- <entry name="enabled" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/net/enabled"/>
- <entry name="needs_terminal" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/net/needs_terminal"/>
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/net/command"/>
+ <entry name="enabled" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/net/enabled"/>
+ <entry name="needs_terminal" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/net/needs_terminal"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/net/command"/>
</dir>
<dir name="mms">
- <entry name="enabled" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/mms/enabled"/>
- <entry name="needs_terminal" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/mms/needs_terminal"/>
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/mms/command"/>
+ <entry name="enabled" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/mms/enabled"/>
+ <entry name="needs_terminal" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/mms/needs_terminal"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/mms/command"/>
</dir>
<dir name="pnm">
- <entry name="enabled" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/pnm/enabled"/>
- <entry name="needs_terminal" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/pnm/needs_terminal"/>
- <entry name="command" mtime="1357308737" schema="/schemas/desktop/gnome/url-handlers/pnm/command"/>
+ <entry name="enabled" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/pnm/enabled"/>
+ <entry name="needs_terminal" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/pnm/needs_terminal"/>
+ <entry name="command" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/pnm/command"/>
</dir>
<dir name="webcal">
<entry name="need-terminal" mtime="1326795150" schema="/schemas/desktop/gnome/url-handlers/webcal/need-terminal"/>
</dir>
<dir name="schemas">
<dir name="apps">
- <entry name="disable_keyboard_shortcuts" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="disable_keyboard_shortcuts" mtime="1359455567" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="Whether to disable the keyboard shortcuts">
<default type="bool" value="false"/>
<longdesc>Whether to disable the keyboard shortcuts</longdesc>
</dir>
</dir>
<dir name="totem">
- <entry name="remember_position" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="remember_position" mtime="1359455567" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="Whether to remember the position of played audio/video files when pausing or closing them.">
<default type="bool" value="false"/>
</local_schema>
</entry>
- <entry name="autoload_chapters" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="autoload_chapters" mtime="1359455567" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="Whether to autoload external chapter files when a movie is loaded">
<default type="bool" value="true"/>
<longdesc>
</longdesc>
</local_schema>
</entry>
- <entry name="autoload_subtitles" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="autoload_subtitles" mtime="1359455567" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="Whether to autoload text subtitle files when a movie is loaded">
<default type="bool" value="false"/>
<longdesc>
</longdesc>
</local_schema>
</entry>
- <entry name="disable_user_plugins" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="disable_user_plugins" mtime="1359455567" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="Whether to disable the plugins in the user's home directory">
<default type="bool" value="false"/>
<longdesc>Whether to disable the plugins in the user's home directory</longdesc>
</local_schema>
</entry>
- <entry name="screenshot_save_path" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="screenshot_save_path" mtime="1359455567" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="Default location for the "Take Screenshot" dialogs">
<default type="string">
<stringvalue></stringvalue>
<longdesc>Default location for the "Take Screenshot" dialogs, default is the Pictures directory</longdesc>
</local_schema>
</entry>
- <entry name="open_path" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="open_path" mtime="1359455567" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="Default location for the "Open..." dialogs">
<default type="string">
<stringvalue></stringvalue>
<longdesc>Default location for the "Open..." dialogs, default is the current directory</longdesc>
</local_schema>
</entry>
- <entry name="subtitle_encoding" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="subtitle_encoding" mtime="1359455567" type="schema" stype="string" owner="totem">
<local_schema locale="en_GB">
<default type="string">
<stringvalue>UTF-8</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="subtitle_font" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="subtitle_font" mtime="1359455567" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="Subtitle font">
<default type="string">
<stringvalue>Sans Bold 20</stringvalue>
<longdesc>Pango font description for subtitle rendering</longdesc>
</local_schema>
</entry>
- <entry name="network-buffer-threshold" mtime="1357308737" type="schema" stype="float" owner="totem">
+ <entry name="network-buffer-threshold" mtime="1359455567" type="schema" stype="float" owner="totem">
<local_schema locale="C" short_desc="Network buffering threshold">
<default type="float" value="2"/>
<longdesc>Amount of data to buffer for network streams before starting to display the stream (in seconds)</longdesc>
</local_schema>
</entry>
- <entry name="visual_quality" mtime="1357308737" type="schema" stype="int" owner="totem">
+ <entry name="visual_quality" mtime="1359455567" type="schema" stype="int" owner="totem">
<local_schema locale="C" short_desc="Visualization quality setting">
<default type="int" value="0"/>
<longdesc>Quality settings for the audio visualization:
"3" for extra large.</longdesc>
</local_schema>
</entry>
- <entry name="audio_output_type" mtime="1357308737" type="schema" stype="int" owner="totem">
+ <entry name="audio_output_type" mtime="1359455567" type="schema" stype="int" owner="totem">
<local_schema locale="C" short_desc="Type of audio output to use">
<default type="int" value="0"/>
<longdesc>
</longdesc>
</local_schema>
</entry>
- <entry name="debug" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="debug" mtime="1359455567" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="Whether to enable debug for the playback engine">
<default type="bool" value="false"/>
</local_schema>
</entry>
- <entry name="disable_deinterlacing" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="disable_deinterlacing" mtime="1359455567" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="Whether to disable deinterlacing for interlaced movies">
<default type="bool" value="false"/>
</local_schema>
</entry>
- <entry name="shuffle" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="shuffle" mtime="1359455567" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="Shuffle mode">
<default type="bool" value="false"/>
</local_schema>
</entry>
- <entry name="repeat" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="repeat" mtime="1359455567" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="Repeat mode">
<default type="bool" value="false"/>
</local_schema>
</entry>
- <entry name="connection_speed" mtime="1357308737" type="schema" stype="int" owner="totem">
+ <entry name="connection_speed" mtime="1359455567" type="schema" stype="int" owner="totem">
<local_schema locale="C" short_desc="Network connection speed">
<default type="int" value="11"/>
<longdesc>Approximate network connection speed, used to select quality on media over the network:
"11" for Intranet/LAN.</longdesc>
</local_schema>
</entry>
- <entry name="auto_resize" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="auto_resize" mtime="1359455567" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="Resize the canvas automatically on file load">
<default type="bool" value="false"/>
</local_schema>
</entry>
- <entry name="saturation" mtime="1357308737" type="schema" stype="int" owner="totem">
+ <entry name="saturation" mtime="1359455567" type="schema" stype="int" owner="totem">
<local_schema locale="C" short_desc="The saturation of the video">
<default type="int" value="32767"/>
</local_schema>
</entry>
- <entry name="hue" mtime="1357308737" type="schema" stype="int" owner="totem">
+ <entry name="hue" mtime="1359455567" type="schema" stype="int" owner="totem">
<local_schema locale="C" short_desc="The hue of the video">
<default type="int" value="32767"/>
</local_schema>
</entry>
- <entry name="contrast" mtime="1357308737" type="schema" stype="int" owner="totem">
+ <entry name="contrast" mtime="1359455567" type="schema" stype="int" owner="totem">
<local_schema locale="C" short_desc="The contrast of the video">
<default type="int" value="32767"/>
</local_schema>
</entry>
- <entry name="brightness" mtime="1357308737" type="schema" stype="int" owner="totem">
+ <entry name="brightness" mtime="1359455567" type="schema" stype="int" owner="totem">
<local_schema locale="C" short_desc="The brightness of the video">
<default type="int" value="32767"/>
</local_schema>
</entry>
- <entry name="visual" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="visual" mtime="1359455567" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="Name of the visual effects plugins">
<default type="string">
<stringvalue>goom</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="show_vfx" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="show_vfx" mtime="1359455567" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="Show visual effects when no video is displayed">
<default type="bool" value="true"/>
<longdesc>
</longdesc>
</local_schema>
</entry>
- <entry name="lock_screensaver_on_audio" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="lock_screensaver_on_audio" mtime="1359455567" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="Allow the screensaver to activate when playing audio">
<default type="bool" value="true"/>
<longdesc>
</entry>
</dir>
<dir name="application@x-flac">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-xm">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-vorbis@ogg">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-vorbis">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-wavpack">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-wav">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-tta">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-speex">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-sbc">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-real-audio">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-realaudio">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-pn-windows-acm">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-pn-wav">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-pn-au">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-pn-aiff">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-musepack">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-ms-wma">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-ms-wax">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-ms-asx">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-ms-asf">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-mpeg">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-mp3">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-mod">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-matroska">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-m4a">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-it">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-gsm">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-flac">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-ape">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-aiff">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@vnd.rn-realaudio">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@prs.sid">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@ogg">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@mpeg">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@mp4">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@midi">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@basic">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@AMR-WB">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@AMR">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@ac3">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@3gpp">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
</local_schema>
</entry>
</dir>
<dir name="audio@x-pn-realaudio">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-totem-stream">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-theora@ogg">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-ogm@ogg">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-nsv">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-ms-wvx">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-ms-wmx">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-ms-wmv">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-ms-wm">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-msvideo">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-ms-asx">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-ms-asf">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-mpeg">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-matroska">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-m4v">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-flv">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-flic">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-fli">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-flc">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-avi">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@x-anim">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@webm">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@vnd.vivo">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@vnd.rn-realvideo">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@vnd.divx">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@vivo">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@quicktime">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@ogg">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@msvideo">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@mpeg">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@mp4v-es">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@mp4">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@mp2t">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@flv">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@fli">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@dv">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="video@3gpp">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="text@x-google-video-pointer">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="misc@ultravox">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="image@x-pict">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="image@vnd.rn-realpix">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="application@x-shorten">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="application@x-quicktimeplayer">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="application@x-ogg">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="application@x-netshow-channel">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="application@x-matroska">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="application@x-flash-video">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="application@x-extension-mp4">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="application@x-extension-m4a">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="application@vnd.rn-realmedia">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="application@vnd.ms-wpl">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="application@sdp">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="application@ram">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="application@ogg">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="application@mxf">
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>/usr/bin/totem-video-thumbnailer -s %s %u %o</stringvalue>
</default>
</local_schema>
</entry>
- <entry name="enable" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enable" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
</local_schema>
</entry>
</dir>
<dir name="icyx">
- <entry name="enabled" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enabled" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="needs_terminal" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="needs_terminal" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>totem "%s"</stringvalue>
</entry>
</dir>
<dir name="icy">
- <entry name="enabled" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enabled" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="needs_terminal" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="needs_terminal" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>totem "%s"</stringvalue>
</entry>
</dir>
<dir name="uvox">
- <entry name="enabled" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enabled" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="needs_terminal" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="needs_terminal" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>totem "%s"</stringvalue>
</entry>
</dir>
<dir name="mmsh">
- <entry name="enabled" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enabled" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="needs_terminal" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="needs_terminal" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>totem "%s"</stringvalue>
</entry>
</dir>
<dir name="rtsp">
- <entry name="enabled" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enabled" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="needs_terminal" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="needs_terminal" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>totem "%s"</stringvalue>
</entry>
</dir>
<dir name="rtp">
- <entry name="enabled" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enabled" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="needs_terminal" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="needs_terminal" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>totem "%s"</stringvalue>
</entry>
</dir>
<dir name="net">
- <entry name="enabled" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enabled" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="needs_terminal" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="needs_terminal" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>totem "%s"</stringvalue>
</entry>
</dir>
<dir name="mms">
- <entry name="enabled" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enabled" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="needs_terminal" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="needs_terminal" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>totem "%s"</stringvalue>
</entry>
</dir>
<dir name="pnm">
- <entry name="enabled" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="enabled" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="true"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="needs_terminal" mtime="1357308737" type="schema" stype="bool" owner="totem">
+ <entry name="needs_terminal" mtime="1359455568" type="schema" stype="bool" owner="totem">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
<longdesc></longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1357308737" type="schema" stype="string" owner="totem">
+ <entry name="command" mtime="1359455568" type="schema" stype="string" owner="totem">
<local_schema locale="C" short_desc="">
<default type="string">
<stringvalue>totem "%s"</stringvalue>
--- /dev/null
+-- File extension and shebang mapping
+
+FileMapping = {
+
+ { Lang="ada", Extensions={"adb", "ads", "a", "gnad"} },
+ { Lang="ampl", Extensions={"dat", "run"} },
+ { Lang="amtrix", Extensions={"s4", "s4t", "s4h", "hnd", "t4"} },
+ { Lang="asm", Extensions={"a51", "29k", "68s", "68x", "x86"} },
+ { Lang="asp", Extensions={"asa"} },
+ { Lang="ats", Extensions={"dats"} },
+ { Lang="aspect", Extensions={"was", "wud"} },
+ { Lang="bat", Extensions={"cmd"} },
+ { Lang="c", Extensions={"c++", "cpp", "cxx", "cc", "h", "hh", "hxx", "hpp", "cu"} },
+ { Lang="coldfusion", Extensions={"cfc","cfm"} },
+ { Lang="cobol", Extensions={"cob", "cbl"} },
+ { Lang="diff", Extensions={"patch"} },
+ { Lang="eiffel", Extensions={"e", "se"} },
+ { Lang="erlang", Extensions={"hrl", "erl"} },
+ { Lang="euphoria", Extensions={"ex", "exw", "wxu", "ew", "eu"} },
+ { Lang="fortran77", Extensions={"f", "for", "ftn"} },
+ { Lang="fortran90", Extensions={"f95", "f90"} },
+ { Lang="haskell", Extensions={"hs"} },
+ { Lang="java", Extensions={"groovy", "grv"} },
+ { Lang="lisp", Extensions={"cl", "clisp", "el", "lsp", "sbcl", "scom"} },
+ { Lang="make", Extensions={"mak", "mk"} },
+ { Lang="smnp", Extensions={"mib","smi"} },
+ { Lang="ocaml", Extensions={"ml","mli"} },
+ { Lang="mod2", Extensions={"mod", "def"} },
+ { Lang="mod3", Extensions={"m3", "i3"} },
+ { Lang="oberon", Extensions={"ooc"} },
+ { Lang="php", Extensions={"php3", "php4", "php5", "php6"} },
+ { Lang="pike", Extensions={"pmod"} },
+ { Lang="pl1", Extensions={"ff", "fp", "fpp", "rpp","sf", "sp", "spb",
+ "spp","sps", "wp", "wf", "wpp","wps","wpb","bdy","spe"} },
+ { Lang="perl", Extensions={"pl","perl", "cgi", "pm", "plx", "plex"} },
+ { Lang="progress", Extensions={"p", "i", "w"} },
+ { Lang="ruby", Extensions={"rb","ruby", "pp", "rjs"} },
+ { Lang="rexx", Extensions={"rex", "rx", "the"} },
+ { Lang="sh", Extensions={"bash", "ebuild", "eclass"} },
+ { Lang="smalltalk", Extensions={"st", "gst", "sq"} },
+ { Lang="sybase", Extensions={"sp"} },
+ { Lang="tcl", Extensions={"wish", "itcl"} },
+ { Lang="tex", Extensions={"sty", "cls"} },
+ { Lang="vb", Extensions={"bas", "basic", "bi", "vbs"} },
+ { Lang="verilog", Extensions={"v"} },
+ { Lang="html", Extensions={"htm", "xhtml"} },
+ { Lang="xml", Extensions={"sgm", "sgml", "nrm", "ent","hdr", "hub", "dtd",
+ "wml","vxml", "wml", "tld", "svg","xsl", "ecf", "jnlp", "xsd"} },
+ { Lang="fsharp", Extensions={"fs","fsx"} },
+ { Lang="informix", Extensions={"4gl"} },
+ { Lang="blitzbasic", Extensions={"bb"} },
+ { Lang="innosetup", Extensions={"iss"} },
+ { Lang="lotus", Extensions={"ls"} },
+ { Lang="ascend", Extensions={"a4c"} },
+ { Lang="actionscript", Extensions={"as"} },
+ { Lang="express", Extensions={"exp"} },
+ { Lang="haxe", Extensions={"hx"} },
+ { Lang="pyrex", Extensions={"pyx"} },
+
+ { Lang="abap4", Extensions={"abp"} },
+ { Lang="csharp", Extensions={"cs"} },
+ { Lang="interlis", Extensions={"ili"} },
+ { Lang="logtalk", Extensions={"lgt"} },
+ { Lang="matlab", Extensions={"m"} },
+ { Lang="nsis", Extensions={"nsi"} },
+ { Lang="bison", Extensions={"y"} },
+ { Lang="squirrel", Extensions={"nut"} },
+ { Lang="luban", Extensions={"lbn"} },
+ { Lang="maya", Extensions={"mel"} },
+ { Lang="nemerle", Extensions={"n"} },
+ { Lang="paradox", Extensions={"sc"} },
+ { Lang="netrexx", Extensions={"nrx"} },
+ { Lang="clearbasic", Extensions={"cb"} },
+ { Lang="graphviz", Extensions={"dot"} },
+ { Lang="small", Extensions={"sma"} },
+ { Lang="autoit", Extensions={"au3"} },
+ { Lang="chill", Extensions={"chl"} },
+ { Lang="autohotkey", Extensions={"ahk"} },
+ { Lang="fame", Extensions={"inp"} },
+ { Lang="modelica", Extensions={"mo"} },
+ { Lang="maple", Extensions={"mpl"} },
+ { Lang="jasmin", Extensions={"j"} },
+ { Lang="snobol", Extensions={"sno"} },
+ { Lang="icon", Extensions={"icn"} },
+ { Lang="felix", Extensions={"flx"} },
+ { Lang="clips", Extensions={"clp"} },
+ { Lang="lindenscript", Extensions={"lsl"} },
+ { Lang="lilypond", Extensions={"ly"} },
+ { Lang="nasal", Extensions={"nas"} },
+ { Lang="clean", Extensions={"icl"} },
+ { Lang="assembler", Extensions={"asm"} },
+ { Lang="bibtex", Extensions={"bib"} },
+ { Lang="python", Extensions={"py"} },
+ { Lang="txt", Extensions={"text"} },
+
+ { Lang="sh", Shebang=[[^#!(\/usr)?(\/local)?\/bin\/(bash|t?csh|[akz]?sh)]] },
+ { Lang="pl", Shebang=[[^#!(\/usr)?(\/local)?\/bin\/perl]] },
+ { Lang="py", Shebang=[[^#!(\/usr)?(\/local)?\/bin\/python]] },
+ { Lang="awk", Shebang=[[^#!(\/usr)?(\/local)?\/bin\/[gn]?awk]] },
+
+}
+++ /dev/null
-#!/bin/sh
-#
-# This version of /sbin/hotplug should works on most GNU/Linux systems
-# using Linux 2.2.18+ or 2.4.* kernels. On 2.2.*, only USB has such
-# hotplugging support; on 2.4.*, so do PCI/Cardbus and network interfaces.
-#
-# In 2.5, both classes and busses can report hotplug events as part
-# of the driver model core functionality. Plus, /sys/$DEVPATH is
-# available for scripting, as well as the $ACTION being reported.
-#
-# The kernel HOTPLUG configuration option needs to be enabled, and most
-# device drivers will be compiled for MODULES (make allmod).
-#
-#
-# HISTORY:
-#
-# 21-Nov-2002 Optionally log events; 2.5 notes (db)
-# 26-Feb-2001 Cleanup (Gioele Barabucci)
-# 14-Feb-2001 Better diagnostics: logging, agent list (contributors)
-# 04-Jan-2001 First "New" version, which only delegates to
-# specialized hotplug agents.
-#
-# $Id: default.hotplug,v 1.4 2004/09/20 21:40:27 kroah Exp $
-#
-
-exec < /dev/null
-test -t 1 || exec > /dev/null
-test -t 2 || exec 2>&1
-
-cd /etc/hotplug
-. ./hotplug.functions
-
-# DEBUG=yes export DEBUG
-
-debug_mesg "arguments ($*) env (`env`)"
-
-#
-# Only one required argument: event type type being dispatched.
-# Examples: usb, pci, isapnp, net, ieee1394, printer, disk,
-# parport, input, ide, cpu, system, ... with 2.5, lots more.
-# Other parameters are passed in the environment, or positionally
-# through argv.
-#
-if [ $# -lt 1 ] || [ "$1" = "help" ] || [ "$1" = "--help" ]; then
- if [ -t ]; then
- echo "Usage: $0 AgentName [AgentArguments]"
-
- AGENTS=""
- for AGENT in /etc/hotplug/*.agent ; do
- TYPE=`basename $AGENT | sed s/.agent//`
- if [ -x $AGENT ]; then
- AGENTS="$AGENTS $TYPE"
- else
- AGENTS="$AGENTS ($TYPE)"
- fi
- done
- echo "AgentName values on this system: $AGENTS"
- else
- mesg "illegal usage $*"
- fi
- exit 1
-fi
-
-#
-# Delegate event handling:
-# /sbin/hotplug FOO ..args.. ==> /etc/hotplug/FOO.agent ..args..
-#
-AGENT=/etc/hotplug/$1.agent
-if [ -x $AGENT ]; then
- shift
- if [ "$DEBUG" != "" ]; then
- mesg "invoke $AGENT ($@)"
- fi
- exec $AGENT "$@"
- mesg "couldn't exec $AGENT"
- exit 1
-fi
-
-debug_mesg "no runnable $AGENT is installed"
-
-#
-# Optionally log events we don't handle directly.
-# Some program or person has asked for $LOG data.
-#
-LOG=/var/log/hotplug/$1.events
-if [ ! -w $LOG ]; then
- # catch-all for unclaimed events
- LOG=/var/log/hotplug/events
-fi
-if [ -w $LOG ]; then
- # record all basic event data
- HOTPLUG_TYPE=$1
- shift
- HOTPLUG_ARGS="$*"
- export HOTPLUG_ARGS HOTPLUG_TYPE
-
- # use to tempfile to buffer events
- # FIXME buffering acts oddly when logging to pipes,
- # it'd be better not to need a tempfile
- TMP=$(mktemp /var/log/hotplug/e-$HOTPLUG_TYPE-XXXXXXXX)
- if [ $? -ne 0 ]; then
- mesg "couldn't create tempfile for logging"
- exit 1
- fi
-
- debug_mesg "log to $LOG ($HOTPLUG_TYPE $HOTPLUG_ARGS)"
- log_to_stdout > $TMP
- cat $TMP >> $LOG
- rm -f $TMP
-
- exit 0
-fi
-
-exit 1
+++ /dev/null
-#
-# Listing a module here prevents the hotplug scripts from loading it.
-# Usually that'd be so that some other driver will bind it instead,
-# no matter which driver happens to get probed first. Sometimes user
-# mode tools can also control driver binding.
-#
-# Syntax: driver name alone (without any spaces) on a line. Other
-# lines are ignored.
-#
-
-# uhci ... usb-uhci handles the same pci class
-usb-uhci
-# usbcore ... module is loaded implicitly, ignore it otherwise
-usbcore
-
-# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices
-de4x5
-# At least 2.4.3 and later xircom_tulip doesn't have that conflict
-# xircom_tulip_cb
-dmfe
-
-#evbug is a debug tool and should be loaded explicitly
-evbug
-
-# Don't hotplug eth1394, bug #128962
-eth1394
-
-shpchp
+++ /dev/null
-#!/bin/sh
-#
-# Dasd hotplug policy agent for Linux 2.4 kernels
-#
-# Copyright (c) 2002 SuSE Linux AG, Nuremberg
-#
-# the GNU Public License applies
-#
-# Author: Susanne Oberhauser <froh@suse.de>, 2002
-#
-#
-# Kernel DASD hotplug params include:
-#
-# s390 device address
-: ${DEVNO?Bad DASD invocation: \$DEVNO is not set}
-
-# Linux major and minor
-: ${MAJOR?Bad DASD invocation: \$MAJOR is not set}
-: ${MINOR?Bad DASD invocation: \$MINOR is not set}
-
-# Linux device name (dasda, ...)
-: ${DASDNAME?Bad DASD invocation: \$DASDNAME is not set}
-
-# Hotplug event type (add, remove, partchk or partremove)
-: ${ACTION?Bad DASD invocation: \$ACTION is not set}
-
-#
-# they are generated here: /usr/src/linux/drivers/s390/block/dasd.c
-#
-
-#
-# HISTORY:
-#
-# 2002-08-06 Susanne Oberhauser <froh@suse.de>
-# created script
-
-cd /etc/hotplug
-. hotplug.functions
-
-( test -d /dev/dasd && test -d /dev/labels ) || {
- debug_mesg "/etc/init.d/boot.dasd_devfs_compat is not started.
-ignoring $ACTION $DEVNO $MAJOR $MINOR $DASDNAME"
- exit 0
-}
-
-mesg "$ACTION $DEVNO $MAJOR $MINOR $DASDNAME"
-
-
-test -r dasd.permissions && . dasd.permissions || {
- mesg DASD permission handling not found
- exit 1
-}
-
-# to preserve the script from doing anything real, call it with
-# CONDOM=echo
-: ${CONDOM=}
-# abort on error or unset variables:
-set -o errexit
-set -o nounset
-
-die() {
- mesg "$*"
- exit 1
-}
-
-
-create_node() #
-# environment:
-# TYPE (char, block)
-# NODE (filename including any leading directories)
-# MAJOR, MINOR
-# OWNER (user.group or unset, which means)
-# PERMISSIONS (symbolic or unset, which means minimal settings)
-#
-# when this function exits sucessfully,
-# $NODE exists as $TYPE-device with $MAJOR and $MINOR, belongs to
-# $OWNER and has $PERMISSIONS.
-
-{
- debug_mesg "create_node $PERMISSIONS $OWNER $MAJOR $MINOR $TYPE $NODE"
- case "$TYPE" in
- block|b) TYPE=b;;
- char|c) TYPE=c;;
- *) die "create_node: wrong TYPE given"
- esac
-
-
- # Don't remove the node, if it has the correct major/minor
-
- if test -e "$NODE"
- then
-
- # if the file exists, check that it is a $TYPE device with the
- # correct major and minor
-
- if test -$TYPE "$NODE"
- then
- ls -l $NODE | {
-
- read existing_mode existing_nlink \
- existing_user existing_group \
- existing_major existing_minor \
- dummy
-
- if test "$existing_major" != "$MAJOR," || test "$existing_minor" != "$MINOR"
- then
- # create a new node using the existing
- # permissions, ownership and timestamp
- $CONDOM rm -f $NODE
- $CONDOM mknod --mode="a=" $NODE $TYPE $MAJOR $MINOR
- fi
- }
- else
- # create a new node using the existing
- # permissions, ownership and timestamp
- $CONDOM rm -f $NODE
- $CONDOM mknod --mode="a=" $NODE $TYPE $MAJOR $MINOR
- fi
- else
- # TODO?: this does not support missing directories, yet:
- # if the node does not exist yet, create it
- $CONDOM mknod --mode="a=" $NODE $TYPE $MAJOR $MINOR
- fi
-
- # always set ownership and permissions
- $CONDOM chown $OWNER $NODE
- $CONDOM chmod $PERMISSIONS $NODE
-}
-
-
-create_symlink()
-# uses these from the environment:
-# LINK
-# TARGET
-# OWNER (user.group) of the link. Directory components belong to root.root
-# CONDOM
-{
- debug_mesg "create_symlink $OWNER $LINK -> $TARGET"
- # first create the directory if necessary:
- link_dir=$(dirname "$LINK")
- test -d "$link_dir" || {
- test -e "$link_dir" && die "$link_dir exists but is not a directory:
-$(ls -l $link_dir)"
- } || {
- $CONDOM install --directory --owner=root --group=root "$link_dir"
- }
- test -e "$LINK" && rm -rf "$LINK"
- $CONDOM ln -snf "$TARGET" "$LINK"
- $CONDOM chown "$OWNER" "$LINK"
-}
-
-case $ACTION in
- add)
- export NODE=/dev/$DASDNAME
- export TYPE=block
- # get $OWNER and $PERMISSIONS
- MISC=$DEVNO \
- dasd_permissions
- create_node
- LINK=/dev/dasd/$DEVNO/device TARGET=$NODE \
- create_symlink
- LINK=/dev/dasd/$DEVNO/disk TARGET=$NODE \
- create_symlink
- ;;
-
- remove)
- $CONDOM rm -f /dev/$DASDNAME*
- VOLSER=$(ls -l /dev/dasd/$DEVNO/VOLSER | sed -e 's,.*-> ,,')
- $CONDOM rm -rf /dev/dasd/$DEVNO
- test "${VOLSER}" != "" && $CONDOM rm -f "$VOLSER"
- ;;
-
- partchk)
- export NODE=/dev/$DASDNAME
- export VOLSER=$(dasdview -j -f $NODE | sed -e 's,[[:space:]]\+$,,')
- CHECKED_VOLSER=$(
- echo "$VOLSER" |
- sed -e '
- # spaces, slashes, asterisks and questionmarks are no good for filenames
- s/[ /*?]/ space, slash, asterisk or questionmark /g
- # nor are nonprinting characters
- s/[^[:print:]]/ nonprinting characters /g
- # "." and ".." are evil as well
- s/^\.$/ dot /
- s/^\.\.$/ dot dot /
- '
- )
-
- if test "$VOLSER" != "$CHECKED_VOLSER"
- then
- mesg "VOLSER label of $NODE is no legal filename: <$VOLSER> -> <$CHECKED_VOLSER> ignoring it."
- VOLSER=""
- fi
-
-
- # If the volser label has changed, this is also notified as a
- # 'partchk' action. remove the old volser if present and
- # different from the new one.
-
- # The VOLSER symlink in the DEVNO directory points to the
- # VOLSER file for deletion of the VOLSER label after device
- # removal (the device is no longer available then to query the
- # VOLSER from there).
-
- test -e /dev/dasd/$DEVNO/VOLSER && {
- OLD_VOLSER="$(ls -l /dev/dasd/$DEVNO/VOLSER | sed -e 's,.*-> ,,')"
- test "$OLD_VOLSER" = "/dev/labels/$VOLSER" || {
- $CONDOM rm -f "$OLD_VOLSER"
- }
- }
-
- # Get ownership and permissions for the nodes and ownership
- # for the symlinks:
-
- MISC=$VOLSER-$DEVNO \
- dasd_permissions
- # add the volser symlink if no other dasd uses that volser yet.
- test "$VOLSER" != "" && test ! -e /dev/labels/"$VOLSER" && {
- LINK=/dev/labels/"$VOLSER" TARGET=../dasd/$DEVNO \
- create_symlink
-
- TARGET=/dev/labels/"$VOLSER" LINK=/dev/dasd/$DEVNO/VOLSER \
- create_symlink
- }
-
- # TODO: for the time being, we ignore /proc/partitions and
- # create all candidate partitions
- export TYPE=block
- for partition in 1 2 3
- do
-
- NODE=/dev/$DASDNAME$partition
-
- # get ownership and permissions for the partition
- MISC="$VOLSER"-$DEVNO-$partition dasd_permissions
-
- MINOR=$((MINOR + partition)) create_node
-
- LINK=/dev/dasd/$DEVNO/part$partition TARGET=$NODE \
- create_symlink
- done
- ;;
-
- partremove)
- $CONDOM rm -f /dev/$DASDNAME[123]
- $CONDOM rm -rf /dev/dasd/$DEVNO/part*
- ;;
- *)
- mesg DASD $ACTION event not supported
- exit 1 ;;
-esac
+++ /dev/null
-#!/bin/sh
-#
-# Copyright (c) 2002 SuSE Linux AG, Nuremberg
-#
-# Author: Susanne Oberhauser <froh@suse.de>, 2002
-#
-# the GNU Public License applies
-#
-
-# modify this function at your heart's:
-dasd_permissions()
-{
-
- case "$NODE-$MAJOR-$MINOR-$MISC" in
- # add your special ownership handling here, e.g.
- #
- # this feature is experimental, which means it's neither
- # supported nor maintained: you're on your own.
- #
- # /dev/dasd*-*-*-*-ORA*) OWNER=ora.ora; PERMISSIONS="ug=rw,o=";;
- #
- /dev/dasd*-*)
- # default:
- OWNER=root.disk
- PERMISSIONS="ug=rw,o="
- ;;
- *)
- die "dasd_permissions: don't know what permissions to give $NODE-$MAJOR-$MINOR-$MISC"
- esac
-}
+++ /dev/null
-#!/bin/sh
-#
-# Firmware-specific hotplug policy agent.
-#
-# Kernel firmware hotplug params include:
-#
-# ACTION=%s [add or remove]
-# DEVPATH=%s [in 2.5 kernels, /sys/$DEVPATH]
-# FIRMWARE=%s
-#
-# HISTORY:
-#
-# 24-Jul-2003 Initial version of "new" hotplug agent.
-#
-# $Id: firmware.agent,v 1.4 2004/09/20 21:23:51 kroah Exp $
-#
-
-cd /etc/hotplug
-. ./hotplug.functions
-# DEBUG=yes export DEBUG
-
-# directory of the firmware files
-FIRMWARE_DIR=/lib/firmware
-
-# mountpoint of sysfs
-SYSFS=$(sed -n 's/^.* \([^ ]*\) sysfs .*$/\1/p' /proc/mounts)
-
-# use /proc for 2.4 kernels
-if [ "$SYSFS" = "" ]; then
- SYSFS=/proc
-fi
-
-#
-# What to do with this firmware hotplug event?
-#
-case "$ACTION" in
-
-add)
- if [ ! -e $SYSFS/$DEVPATH/loading ]; then
- sleep 1
- fi
-
- if [ -f "$FIRMWARE_DIR/$FIRMWARE" ]; then
- echo 1 > $SYSFS/$DEVPATH/loading
- cp "$FIRMWARE_DIR/$FIRMWARE" $SYSFS/$DEVPATH/data
- echo 0 > $SYSFS/$DEVPATH/loading
- else
- echo -1 > $SYSFS/$DEVPATH/loading
- fi
-
- ;;
-
-remove)
- ;;
-
-*)
- mesg "Firmware '$ACTION' event not supported"
- exit 1
- ;;
-
-esac
+++ /dev/null
-#
-# Setup and BASH utility functions for use in hotplug agents
-#
-# Most essential parameters are passed from the kernel using
-# environment variables. For more information, see the docs
-# on-line at http://linux-hotplug.sourceforge.net or the
-# sources for each hotplug-aware kernel subsystem.
-#
-# $Id: hotplug.functions,v 1.27 2004/09/20 23:12:07 kroah Exp $
-#
-#
-
-# DEBUG=yes; export DEBUG
-PATH=/bin:/sbin:/usr/sbin:/usr/bin
-
-KERNEL=`uname -r`
-MODULE_DIR=/lib/modules/$KERNEL
-
-HOTPLUG_DIR=/etc/hotplug
-
-if [ -f /etc/sysconfig/hotplug ]; then
- . /etc/sysconfig/hotplug
-fi
-
-if [ -x /usr/bin/logger ]; then
- LOGGER=/usr/bin/logger
-elif [ -x /bin/logger ]; then
- LOGGER=/bin/logger
-else
- unset LOGGER
-fi
-#
-# for diagnostics
-#
-if [ -t 1 -o -z "$LOGGER" ]; then
- mesg () {
- echo "$@"
- }
-else
- mesg () {
- $LOGGER -t $(basename $0)"[$$]" "$@"
- }
-fi
-
-debug_mesg () {
- test "$DEBUG" = "" -o "$DEBUG" = no && return
- mesg "$@"
-}
-
-
-#
-# Not "modprobe --autoclean" ... one driver module can handle many
-# devices. Unloading should be done when no devices are present.
-# Autocleaning happens if none of the devices are open, once any of
-# them gets opened; wrong timing.
-#
-MODPROBE="/sbin/modprobe -s -q"
-#MODPROBE="/sbin/modprobe -vs"
-
-
-####################################################################
-#
-# usage: load_driver type filename description
-#
-# modprobes driver module(s) if appropriate, and optionally
-# invokes a driver-specific setup script (or user-mode driver).
-#
-# the "modules.*map" format file is guaranteed to exist
-#
-load_drivers ()
-{
- local LOADED TYPE FILENAME DESCRIPTION LISTER
- DRIVERS=""
-
- # make this routine more readable
- TYPE=$1
- FILENAME=$2
- DESCRIPTION=$3
-
- # should we use usbmodules, pcimodules? not on 2.5+, because sysfs
- # ought to expose the data we need to find all candidate drivers.
- # (on 2.5.48 it does for usb; but maybe not yet for pci.)
- case "$KERNEL" in
- 2.2*|2.3*|2.4*) LISTER=`which ${TYPE}modules` ;;
- *) LISTER="" ;;
- esac
-
- if [ "$LISTER" != "" ]; then
- # lister programs MIGHT be preferable to parsing from shell scripts:
- # - usbmodules used for (a) multi-interface devices, (b) coldplug
- # - pcimodules used only for coldplug
- case $TYPE in
- usb)
- # "usbutils-0.8" (or later) is needed in $PATH
- # only works if we have usbfs
- # ... reads more descriptors than are passed in env
- # ... doesn't handle comment syntax either
- if [ "$DEVICE" = "" -o ! -f "$DEVICE" ]; then
- LISTER=
- else
- DRIVERS=`$LISTER --mapfile $FILENAME --device $DEVICE`
- fi ;;
-
- pci)
- debug_mesg "pcimodules is scanning more than $PCI_SLOT ..."
- DRIVERS=`$LISTER`
- ;;
- esac
- fi
-
- # try parsing by shell scripts if no luck yet
- if [ "$DRIVERS" = "" ]; then
- ${TYPE}_map_modules < $FILENAME
- fi
-
- # FIXME remove dups and blacklisted modules from $DRIVERS here
-
- if [ "$DRIVERS" = "" ]; then
- return
- fi
-
- # Note that DRIVERS aren't all going to be modules.
- # For USB, some user-mode drivers or setup scripts may be listed.
- debug_mesg Setup $DRIVERS for $DESCRIPTION
-
- # either kernel or user mode drivers may need to be set up
- for MODULE in $DRIVERS
- do
- # maybe driver modules need loading
- LOADED=false
- if ! lsmod | grep -q "^$(echo $MODULE|sed -e 's/-/_/g') " > /dev/null 2>&1; then
- if grep -q "^$(echo $MODULE|sed -e 's/[-_]/[-_]/g')\$" $HOTPLUG_DIR/blacklist \
- $HOTPLUG_DIR/blacklist.d/* \
- >/dev/null 2>&1; then
- debug_mesg "... blacklisted module: $MODULE"
- continue
- fi
-
- # statically linked modules aren't shown by 'lsmod',
- # and user mode drivers will ONLY have a setup script;
- # it's not an error if a module doesn't exist or won't load.
- if $MODPROBE -n $MODULE >/dev/null 2>&1 &&
- ! $MODPROBE $MODULE >/dev/null 2>&1 ; then
- mesg "... can't load module $MODULE"
- else
- # /etc/modules.conf may have set non-default module
- # parameters ... handle per-device parameters in apps
- # (ioctls etc) not in setup scripts or modules.conf
- LOADED=true
- fi
- else
- # This module is already loaded
- LOADED=true
- fi
-
- # always run setup scripts after any matching kernel code has had
- # a chance to do its thing, no matter whether it was dynamically
- # or statically linked, or if there is only a user mode driver.
- # the script might re-enumerate usb devices after firmware download,
- # giving kernel code another chance.
- if [ -x $HOTPLUG_DIR/$TYPE/$MODULE ]; then
- debug_mesg Module setup $MODULE for $DESCRIPTION
- $HOTPLUG_DIR/$TYPE/$MODULE
- LOADED=true
- fi
-
- if [ "$LOADED" = "false" ]; then
- mesg "missing kernel or user mode driver $MODULE "
- fi
- if echo "$MODULE" | grep -q "usb-storage" > /dev/null 2>&1 ; then
- [ -x /usr/sbin/updfstab ] && /usr/sbin/updfstab
- fi
- done
-}
-
-####################################################################
-#
-# usage: log_to_stdout filename
-#
-# writes a copy of the current hotplug event to stdout.
-# add buffering, to avoid interleaving reports!
-#
-log_to_stdout ()
-{
- if [ -x /bin/date ]; then
- echo "HOTPLUG_TIME='$(/bin/date)'"
- fi
-
- env | egrep -v '^PATH=|^PWD=|^_=|^OLDPWD=|^SHLVL=|^HOME='
- echo ''
- # empty line terminates events
-}
-
-# vim:syntax=sh
+++ /dev/null
-#!/bin/sh
-#
-# IEEE1394-specific hotplug policy agent.
-#
-# This should handle 2.4.10 (or later) IEEE1394 hotplugging, with a
-# consistent framework for adding device and driver specific treatments.
-#
-# Kernel IEEE1394 params are:
-#
-# ACTION=add or remove
-# VENDOR_ID=24 bit vendor id
-# GUID=64 bit globally unique id
-# SPEFICIER_ID=24 bit id of owner of specification
-# VERSION=version of specification
-#
-# See IEEE1212 for details on these parameters.
-#
-# HISTORY:
-# 26-Mar-2002 Small cleanups to match other .agent files. (gkh)
-# 16-Sept-2001 Initial version from Kristian Hogsberg
-# <hogsberg@users.sourceforge.net> (plus tweaks)
-#
-# $Id: ieee1394.agent,v 1.13 2004/09/20 21:43:37 kroah Exp $
-#
-
-cd /etc/hotplug
-. ./hotplug.functions
-# DEBUG=yes export DEBUG
-
-# generated by modutils 2.4.9 or later, for 2.4.10 and later kernels
-MAP_CURRENT=$MODULE_DIR/modules.ieee1394map
-
-# accumulates list of modules we may care about
-DRIVERS=
-
-if [ "$ACTION" = "" ]; then
- mesg Bad IEEE1394 agent invocation
- exit 1
-fi
-
-
-device_vendor_id=$((0x$VENDOR_ID))
-device_specifier_id=$((0x$SPECIFIER_ID))
-device_version=$((0x$VERSION))
-
-MATCH_VENDOR_ID=0x0001
-MATCH_SPECIFIER_ID=0x0004
-MATCH_VERSION=0x0008
-
-#
-# stdin is "modules.ieee1394map" syntax
-# on return, all matching modules were added to $DRIVERS
-#
-ieee1394_map_modules ()
-{
- # comment line lists (current) pci_device_id field names
- read ignored
-
- while read module match_flags vendor_id model_id specifier_id version
- do
- : check match for $module
-
- # convert from hex to dec
- match_flags=$(($match_flags))
- vendor_id=$(($vendor_id)); model_id=$(($model_id))
- specifier_id=$(($specifier_id)); version=$(($version))
-
- : vendor_id $vendor_id $device_vendor_id
- if [ $(($match_flags & $MATCH_VENDOR_ID)) -ne 0 ] && [ $vendor_id -ne $device_vendor_id ]; then
- continue
- fi
-
- : specifier_id $specifier_id $device_specifier_id
- if [ $(($match_flags & $MATCH_SPECIFIER_ID)) -ne 0 ] && [ $specifier_id -ne $device_specifier_id ]; then
- continue
- fi
-
- : version $version $device_version
- if [ $(($match_flags & $MATCH_VERSION)) -ne 0 ] && [ $version != $device_version ]; then
- continue
- fi
-
- DRIVERS="$module $DRIVERS"
- done
-}
-
-#
-# What to do with this IEEE1394 hotplug event?
-#
-case "$ACTION" in
-
-add)
- LABEL="IEEE1394 product 0x$VENDOR_ID/0x$SPECIFIER_ID/0x$VERSION"
-
- # on 2.4 systems, modutils maintains MAP_CURRENT
- if [ -r $MAP_CURRENT ]; then
- load_drivers ieee1394 $MAP_CURRENT "$LABEL"
- fi
-
- if [ "$DRIVERS" = "" ]; then
- mesg "... no drivers for $LABEL"
- exit 2
- fi
- ;;
-
-remove)
- ieee1394_map_modules < $MAP_CURRENT
- for MODULE in $DRIVERS
- do
- if [ -x $HOTPLUG_DIR/ieee1394/$MODULE ]; then
- $HOTPLUG_DIR/ieee1394/$MODULE
- fi
- done
- ;;
-
-*)
- debug_mesg "IEEE1394 '$ACTION' event not supported"
- exit 1
- ;;
-
-esac
+++ /dev/null
-#!/bin/sh
-#
-# input-specific hotplug policy agent.
-#
-# This should handle 2.6.* input hotplugging,
-# with a consistent framework for adding device and driver
-# specific handling.
-#
-# Normally, adding a input device will modprobe handler(s) for
-# this device.
-#
-# Kernel input hotplug params include (not all of them may be available):
-#
-# ACTION=%s [add or remove]
-# PRODUCT=%x/%x/%x/%x
-# NAME=%s
-# PHYS=%s
-# EV=%lx
-# KEY=%lx %lx ...
-# REL=%lx
-# ABS=%lx %lx ...
-# MSC=%lx
-# LED=%lx
-# SND=%lx
-# FF=%lx %lx ...
-#
-# HISTORY:
-#
-# 30-Jul-2003 initial version
-#
-
-cd /etc/hotplug
-. ./hotplug.functions
-# DEBUG=yes export DEBUG
-
-# generated by module-init-tools
-MAP_CURRENT=$MODULE_DIR/modules.inputmap
-
-# accumulates list of modules we may care about
-DRIVERS=""
-
-if [ "$ACTION" = "" ]; then
- mesg Bad INPUT agent invocation, no action
- exit 1
-fi
-
-# we can't "unset IFS" on bash1, so save a copy
-DEFAULT_IFS="$IFS"
-
-#
-# Each modules.inputmap format line corresponds to one entry in a
-# MODULE_DEVICE_TABLE(input,...) declaration in a kernel file.
-#
-matchBits=0; i_bustype=0; i_vendor=0; i_product=0; i_version=0; i_evBits=0
-
-input_join_words ()
-{
- name="$1"
- array="$2"
-
- if [ "$array" = '' ]; then
- return
- fi
-
- set $array
-
- tmp="$1"
- shift
- while [ "$#" -gt 0 ]; do
- tmp="$tmp:$1"
- shift
- done
-
- eval "$name=\"$tmp\""
-}
-
-input_convert_vars ()
-{
- if [ "$PRODUCT" != "" ]; then
- IFS=/
- set $PRODUCT ''
- IFS="$DEFAULT_IFS"
- i_bustype=$((0x$1))
- i_vendor=$((0x$2))
- i_product=$((0x$3))
- i_version=$((0x$4))
- fi
-
- if [ "$EV" != "" ]; then
- i_evBits=$((0x$EV))
- fi
-
- input_join_words i_keyBits "$KEY"
- input_join_words i_relBits "$REL"
- input_join_words i_absBits "$ABS"
- input_join_words i_mscBits "$MSC"
- input_join_words i_ledBits "$LED"
- input_join_words i_sndBits "$SND"
- input_join_words i_ffBits "$FF"
-}
-
-INPUT_DEVICE_ID_MATCH_BUS=1
-INPUT_DEVICE_ID_MATCH_VENDOR=2
-INPUT_DEVICE_ID_MATCH_PRODUCT=4
-INPUT_DEVICE_ID_MATCH_VERSION=8
-INPUT_DEVICE_ID_MATCH_EVBIT=$((0x010))
-INPUT_DEVICE_ID_MATCH_KEYBIT=$((0x020))
-INPUT_DEVICE_ID_MATCH_RELBIT=$((0x040))
-INPUT_DEVICE_ID_MATCH_ABSBIT=$((0x080))
-INPUT_DEVICE_ID_MATCH_MSCBIT=$((0x100))
-INPUT_DEVICE_ID_MATCH_LEDBIT=$((0x200))
-INPUT_DEVICE_ID_MATCH_SNDBIT=$((0x400))
-INPUT_DEVICE_ID_MATCH_FFBIT=$((0x800))
-
-
-input_match_bits ()
-{
- mod_bits=$1
- dev_bits=$2
-
- if [ "$dev_bits" = "" ]; then
- return 0
- fi
- mword=$((0x${mod_bits##*:}))
- dword=$((0x${dev_bits##*:}))
-
- while true; do
- if [ $(( $mword & $dword != $mword )) -eq 1 ]; then
- return 1
- fi
-
- mod_bits=${mod_bits%:*}
- dev_bits=${dev_bits%:*}
-
- case "$mod_bits-$dev_bits" in
- *:*-*:* )
- : continue
- ;;
- *:*-*|*-*:* )
- return 0
- ;;
- * )
- return 1
- ;;
- esac
- done
-}
-
-#
-# stdin is "modules.inputmap" syntax
-# on return, all matching modules were added to $DRIVERS
-#
-input_map_modules ()
-{
- while read line
- do
- # comments are lines that start with "#" ...
- # be careful, they still get parsed by bash!
- case "$line" in
- \#*) continue ;;
- esac
-
- set $line
-
- module="$1"
- matchBits=$(($2))
-
- bustype=$(($3))
- vendor=$(($4))
- product=$(($5))
- version=$(($6))
-
- evBits="$7"
- keyBits="$8"
- relBits="$9"
-
- shift 9
- absBits="$1"
- cbsBits="$2"
- ledBits="$3"
- sndBits="$4"
- ffBits="$5"
- driverInfo=$(($6))
-
- : checkmatch $module
-
- : bustype $bustype $i_bustype
- if [ $INPUT_DEVICE_ID_MATCH_BUS -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_BUS )) ] &&
- [ $bustype -ne $i_bustype ]; then
- continue
- fi
-
- : vendor $vendor $i_vendor
- if [ $INPUT_DEVICE_ID_MATCH_VENDOR -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_VENDOR )) ] &&
- [ $vendor -ne $i_vendor ]; then
- continue
- fi
-
- : product $product $i_product
- if [ $INPUT_DEVICE_ID_MATCH_PRODUCT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_PRODUCT )) ] &&
- [ $product -ne $i_product ]; then
- continue
- fi
-
- # version i_version $i_version < version $version
- if [ $INPUT_DEVICE_ID_MATCH_VERSION -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_VERSION )) ] &&
- [ $version -ge $i_version ]; then
- continue
- fi
-
- : evBits $evBits $i_evBits
- if [ $INPUT_DEVICE_ID_MATCH_EVBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_EVBIT )) ] &&
- input_match_bits "$evBits" "$i_evBits"; then
- continue
- fi
- : keyBits $keyBits $i_keyBits
- if [ $INPUT_DEVICE_ID_MATCH_KEYBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_KEYBIT )) ] &&
- input_match_bits "$keyBits" "$i_keyBits"; then
- continue
- fi
- : relBits $relBits $i_relBits
- if [ $INPUT_DEVICE_ID_MATCH_RELBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_RELBIT )) ] &&
- input_match_bits "$relBits" "$i_relBits"; then
- continue
- fi
-
- : absBits $absBits $i_absBits
- if [ $INPUT_DEVICE_ID_MATCH_ABSBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_ABSBIT )) ] &&
- input_match_bits "$absBits" "$i_absBits"; then
- continue
- fi
-
- : mscBits $mscBits $i_mscBits
- if [ $INPUT_DEVICE_ID_MATCH_MSCBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_MSCBIT )) ] &&
- input_match_bits "$mscBits" "$i_mscBits"; then
- continue
- fi
-
- : ledBits $ledBits $_ledBits
- if [ $INPUT_DEVICE_ID_MATCH_LEDBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_LEDBIT )) ] &&
- input_match_bits "$ledBits" "$i_ledBits"; then
- continue
- fi
-
- : sndBits $sndBits $i_sndBits
- if [ $INPUT_DEVICE_ID_MATCH_SNDBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_SNDBIT )) ] &&
- input_match_bits "$sndBits" "$i_sndBits"; then
- continue
- fi
-
- : ffBits $ffBits $i_ffBits
- if [ $INPUT_DEVICE_ID_MATCH_FFBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_FFBIT )) ] &&
- input_match_bits "$ffBits" "$i_ffBits"; then
- continue
- fi
-
- : driverInfo $driverInfo
- if [ $matchBits -eq 0 ] && [ $driverInfo -eq 0 ]; then
- continue
- fi
-
- # It was a match!
- case " $DRIVERS " in
- *" $module "* )
- : already found
- ;;
- * )
- DRIVERS="$module $DRIVERS"
- ;;
- esac
- : drivers $DRIVERS
- done
-}
-
-#
-# What to do with this INPUT hotplug event?
-#
-case $ACTION in
-
-add)
-
- input_convert_vars
-
- FOUND=false
- LABEL="INPUT product $PRODUCT"
-
- if [ -r $MAP_CURRENT ]; then
- load_drivers input $MAP_CURRENT "$LABEL"
- fi
-
- if [ "$DRIVERS" != "" ]; then
- FOUND=true
- fi
-
- if [ "$FOUND" = "false" ]; then
- debug_mesg "... no modules for $LABEL"
- exit 2
- fi
-
- ;;
-
-remove)
- : nothing so far
-
- ;;
-
-*)
- debug_mesg INPUT $ACTION event not supported
- exit 1
- ;;
-
-esac
+++ /dev/null
-#!/bin/sh
-#
-# input.rc This loads handlers for those input devices
-# that have drivers compiled in kernel
-# Currently stopping is not supported
-#
-# Best invoked via /etc/init.d/hotplug or equivalent, with
-# writable /tmp, /usr mounted, and syslogging active.
-#
-
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-PROCDIR=/proc/bus/input
-
-# source function library
-if [ -f /etc/init.d/functions ]; then
- . /etc/init.d/functions
-elif [ -f /etc/rc.d/init.d/functions ]; then
- . /etc/rc.d/init.d/functions
-fi
-
-if [ -f /etc/hotplug/hotplug.functions ]; then
- . /etc/hotplug/hotplug.functions
-fi
-
-input_reset_state () {
-
- PRODUCT=
- NAME=
- PHYS=
- EV=
- KEY=
- REL=
- ABS=
- MSC=
- LED=
- SND=
- FF=
-
-}
-
-#
-# "COLD PLUG" ... load input handlers for compile-in input drivers loaded
-# before the OS could really handle hotplug, perhaps because /sbin or
-# $HOTPLUG_DIR wasn't available or /tmp wasn't writable. When/if the
-# /sbin/hotplug program is invoked then, hotplug event notifications
-# get dropped. To make up for such "cold boot" errors, we synthesize
-# all the hotplug events we expect to have seen already. They can be
-# out of order, and some might be duplicates.
-#
-input_boot_events ()
-{
- # do not even try if /proc/bus/input is missing
- [ -d $PROCDIR ] || return
-
- if [ ! -r $PROCDIR/devices ]; then
- echo $"** can't synthesize input events - $PROCDIR/devices missing"
- return
- fi
-
- ACTION=add
- export ACTION
-
- export PRODUCT NAME PHYS EV KEY REL ABS MSC LED SND FF
- input_reset_state
-
- #
- # the following reads from /proc/bus/input/devices. It is inherently
- # racy (esp. as this file may be changed by input.agent invocation)
- # but so far input devices do not appear in sysfs
- #
- while read line; do
- case "$line" in
- I:* ) # product ID
- eval "${line#I: }"
- PRODUCT="$Bus/$Vendor/$Product/$Version"
- ;;
- N:* ) # name
- eval "${line#N: }"
- NAME="$Name"
- ;;
- P:* ) # Physical
- eval "${line#P: }"
- PHYS="$Phys"
- ;;
- B:* ) # Controls supported
- line="${line#B: }"
- eval "${line%%=*}=\"${line#*=}\""
- ;;
- "" ) # End of block
- debug_mesg "Invoking input.agent"
- debug_mesg "PRODUCT=$PRODUCT"
- debug_mesg "NAME=$NAME"
- debug_mesg "PHYS=$PHYS"
- debug_mesg "EV=$EV"
- debug_mesg "KEY=$KEY"
- debug_mesg "REL=$REL"
- debug_mesg "ABS=$ABS"
- debug_mesg "MSC=$MSC"
- debug_mesg "LED=$LED"
- debug_mesg "SND=$SND"
- debug_mesg "FF=$FF"
- /etc/hotplug/input.agent < /dev/null
- input_reset_state
- ;;
- esac
- done < $PROCDIR/devices
-}
-
-
-# See how we were called.
-case "$1" in
- start)
- input_boot_events
- ;;
- stop)
- : not supported currently
- ;;
- status)
- echo $"INPUT status for kernel: " `uname -srm`
- echo ''
-
- echo "INPUT devices:"
- if [ -r $PROCDIR/devices ]; then
- grep "^[INHP]:" $PROCDIR/devices
- else
- echo "$PROCDIR/devices not available"
- fi
- echo ''
-
- echo "INPUT handlers:"
- if [ -r $PROCDIR/handlers ]; then
- cat $PROCDIR/handlers
- else
- echo "$PROCDIR/handlers not available"
- fi
-
- echo ''
-
- ;;
- restart)
- # always invoke by absolute path, else PATH=$PATH:
- $0 stop && $0 start
- ;;
- *)
- echo $"Usage: $0 {start|stop|status|restart}"
- exit 1
-esac
+++ /dev/null
-#!/bin/sh
-#
-# Network hotplug policy agent for Linux 2.4 kernels
-#
-# Kernel NET hotplug params include:
-#
-# ACTION=%s [register or unregister]
-# INTERFACE=%s
-#
-# HISTORY:
-#
-# 25-Feb-2001 Special case ppp and similar (redhat)
-# 23-Jan-2001 Log invocation of "ifup" if debugging
-# 04-Jan-2001 Initial version of "new" hotplug agent.
-#
-# $Id: net.agent,v 1.22 2004/09/20 23:02:34 kroah Exp $
-#
-
-cd /etc/hotplug
-. ./hotplug.functions
-# DEBUG=yes export DEBUG
-
-if [ "$INTERFACE" = "" ]; then
- mesg Bad NET invocation: \$INTERFACE is not set
- exit 1
-fi
-
-case $ACTION in
-add|register)
- # Red Hat specific hack...
- if [ -f /etc/redhat-release ]; then
- # Don't do anything if the network is stopped
- if [ ! -f /var/lock/subsys/network ]; then
- exit 0
- fi
- fi
-
- case $INTERFACE in
- # interfaces that are registered after being "up" (?)
- ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*)
- debug_mesg assuming $INTERFACE is already up
- exit 0
- ;;
- # interfaces that are registered then brought up
- *)
- # NOTE: network configuration relies on administered state,
- # we can't do much here without distro-specific knowledge
- # such as whether/how to invoke DHCP, set up bridging, etc.
-
- # Run ifrename as needed - Jean II
- # Remap interface names based on MAC address. This workaround
- # the dreaded configuration problem "all my cards are 'eth0'"...
- # This needs to be done before ifup otherwise ifup will get
- # confused by the name changed and because iface need to be
- # down to change its name.
- if [ -x /sbin/ifrename ] && [ -r /etc/iftab ]; then
- debug_mesg invoke ifrename for $INTERFACE
- NEWNAME=`/sbin/ifrename -i $INTERFACE`
- if [ -n "$NEWNAME" ]; then
- debug_mesg iface $INTERFACE is remapped to $NEWNAME
- INTERFACE=$NEWNAME
- fi;
- fi
-
- # RedHat and similar
- export IN_HOTPLUG=1
- if [ -x /sbin/ifup ]; then
- debug_mesg invoke ifup $INTERFACE
- exec /sbin/ifup $INTERFACE
-
- # Gentoo
- elif [ -f /etc/gentoo-release ]; then
- script=/etc/init.d/net.$INTERFACE
- if [ -x "$script" ]; then
- debug_mesg invoke \"$script\" --quiet start
- exec "$script" --quiet start
- fi
- else
- mesg "how do I bring interfaces up on this distro?"
- fi
- ;;
- esac
- mesg $1 $ACTION event not handled
- ;;
-
-remove|unregister)
- case $INTERFACE in
- # interfaces that are unregistered after being "down" (?)
- ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*)
- debug_mesg assuming $INTERFACE is already down
- exit 0
- ;;
- *)
- # right now it looks like only Gentoo wants to care about
- # unregistering network devices...
- if [ -f /etc/gentoo-release ]; then
- script=/etc/init.d/net.$INTERFACE
- if [ -x "$script" ]; then
- debug_mesg invoke "$script" --quiet stop
- exec "$script" --quiet stop
- fi
- fi
- ;;
- esac
- mesg $1 $ACTION event not handled
- ;;
-
-*)
- debug_mesg NET $ACTION event for $INTERFACE not supported
- exit 1 ;;
-
-esac
+++ /dev/null
-#!/bin/sh
-#
-# PCI-specific hotplug policy agent.
-#
-# This should handle 2.4.* PCI (including Cardbus) hotplugging,
-# with a consistent framework for adding device and driver specific
-# treatments.
-#
-# Kernel Cardbus/PCI params are:
-#
-# ACTION=%s [add or remove]
-# PCI_CLASS=%06X
-# PCI_ID=%04X:%04X
-# PCI_SLOT_NAME=%s
-# PCI_SUBSYS_ID=%04X:%04X
-#
-# If /proc is mounted, /proc/bus/pci/$PCI_SLOT_NAME is almost the name
-# of the binary device descriptor file ... just change ':' to '/'.
-#
-# On systems using Linux 2.4.* kernels, be sure to use the right
-# modutils (2.4.1+).
-#
-#
-# HISTORY:
-#
-# 26-Feb-2001 Cleanup, support comments (Gioele Barabucci)
-# 13-Jan-2001 Initial version of "new" hotplug agent; needs
-# retesting.
-# 17-Jan-2001 Update to latest kernel syntax (Dan Zink)
-# 15-Feb-2001 Remove use of "<<" (Adam Richter)
-#
-# $Id: pci.agent,v 1.16 2004/09/20 21:43:37 kroah Exp $
-#
-
-cd /etc/hotplug
-. ./hotplug.functions
-
-# generated by modutils, for current 2.4.x kernels
-MAP_CURRENT=$MODULE_DIR/modules.pcimap
-
-# accumulates list of modules we may care about
-DRIVERS=
-
-if [ "$PCI_CLASS" = "" ] || [ "$PCI_CLASS" = "" ]; then
- mesg Bad PCI agent invocation
- exit 1
-fi
-
-#
-# Each modules.usbmap format line corresponds to one entry in a
-# MODULE_DEVICE_TABLE(pci,...) declaration in a kernel file.
-#
-# Think of it as a database column with up to three "match specs"
-# to associate kernel modules with particular devices or classes
-# of device. The match specs provide a reasonably good filtering
-# mechanism, but some driver probe() routines need to provide
-# extra filtering.
-#
-
-pci_convert_vars ()
-{
- pci_class=$((0x$PCI_CLASS))
-
- set $(echo $PCI_ID | sed -e 's/\([^:]*\):\(.*\)/\1 \2/')
- pci_id_vendor=$((0x$1))
- pci_id_device=$((0x$2))
-
- set $(echo $PCI_SUBSYS_ID | sed -e 's/\([^:]*\):\(.*\)/\1 \2/')
- pci_subid_vendor=$((0x$1))
- pci_subid_device=$((0x$2))
-}
-
-PCI_ANY=$((0xffffffff))
-
-
-#
-# stdin is "modules.pcimap" syntax
-# on return, ONE matching module was added to $DRIVERS
-#
-pci_map_modules ()
-{
- # comment line lists (current) pci_device_id field names
- read ignored
-
- # look at each pci_device_id entry
- # collect one match in $DRIVERS
- while read module vendor device subvendor subdevice class class_mask ignored
- do
- # comments are lines that start with "#" ...
- # be careful, they still get parsed by bash!
- case "$module" in
- \#*) continue ;;
- esac
-
- # convert the fields from hex to dec
- vendor=$(($vendor)); device=$(($device))
- subvendor=$(($subvendor)); subdevice=$(($subdevice))
- class=$(($class)); class_mask=$(($class_mask))
-
- : checkmatch $module
-
- : vendor $vendor $pci_id_vendor
- if [ $vendor -ne $PCI_ANY ] && [ $vendor -ne $pci_id_vendor ]; then
- continue
- fi
- : device $device $pci_id_device
- if [ $device -ne $PCI_ANY ] && [ $device -ne $pci_id_device ]; then
- continue
- fi
- : sub-vendor $subvendor $pci_subid_vendor
- if [ $subvendor -ne $PCI_ANY ] && [ $subvendor -ne $pci_subid_vendor ]; then
- continue
- fi
- : sub-device $subdevice $pci_subid_device
- if [ $subdevice -ne $PCI_ANY ] && [ $subdevice -ne $pci_subid_device ]; then
- continue
- fi
-
- class_temp=$(($pci_class & $class_mask))
- if [ $class_temp -eq $class ]; then
- DRIVERS="$module $DRIVERS"
- : drivers $DRIVERS
- break
- fi
- done
-}
-
-
-#
-# What to do with this PCI hotplug event?
-#
-case $ACTION in
-
-add)
- pci_convert_vars
-
- LABEL="PCI slot $PCI_SLOT_NAME"
-
- # on 2.4 systems, modutils maintains MAP_CURRENT
- if [ -r $MAP_CURRENT ]; then
- load_drivers pci $MAP_CURRENT "$LABEL"
- fi
-
- if [ "$DRIVERS" = "" ]; then
- debug_mesg "... no modules for $LABEL"
- exit 2
- fi
- ;;
-
-*)
- debug_mesg PCI $ACTION event not supported
- exit 1
- ;;
-
-esac
+++ /dev/null
-#!/bin/sh
-# vim: syntax=sh
-#
-# pci.rc mostly to recover lost boot-time pci hotplug events
-#
-# $Id: pci.rc,v 1.12 2004/09/20 21:36:47 kroah Exp $
-#
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-
-cd /etc/hotplug
-. ./hotplug.functions
-
-pci_boot_events ()
-{
- # make sure the pci agent will run
- ACTION=add
- PCI_CLASS=0
- PCI_ID=0:0
- PCI_SLOT=0:0.0
- PCI_SLOT_NAME=0:0.0
- PCI_SUBSYS_ID=0:0
- export ACTION PCI_CLASS PCI_ID PCI_SLOT PCI_SLOT_NAME PCI_SUBSYS_ID
-
- if [ -d /sys/bus ]; then
- # 2.6 kernels
- if [ -d /sys/bus/pci/devices/ ]; then
- cd /sys/bus/pci/devices/
- for PCI_DEVICE in *; do
- set `echo $PCI_DEVICE \
- | sed -e 's/\([^:]*\):\(.*\):\(.*\)\.\(.*\)/\1 \2 \3 \4/'`
- PCI_SLOT_NAME=$2:$3.$4
- PCI_CLASS="`cat $PCI_DEVICE/class`"
- PCI_CLASS=${PCI_CLASS#0x}
- vendor_id=`cat $PCI_DEVICE/vendor`
- device_id=`cat $PCI_DEVICE/device`
- PCI_ID="${vendor_id#0x}:${device_id#0x}"
- sub_vendor_id=`cat $PCI_DEVICE/subsystem_vendor`
- sub_device_id=`cat $PCI_DEVICE/subsystem_device`
- PCI_SUBSYS_ID="${sub_vendor_id#0x}:${sub_device_id#0x}"
- /sbin/hotplug pci
- done
- fi
- else
- # 2.4 kernels
- LISTER=`which pcimodules`
- if [ "$LISTER" = "" ] || [ ! -f /proc/bus/pci/devices ] || [ ! -x pci.agent ]; then
- echo $"** can't synthesize pci hotplug events"
- return 1
- fi
-
- # these notifications will be handled by pcimodules
- for BUS in `cd /proc/bus/pci;find * -type d -print`; do
- for SLOT_FUNC in `cd /proc/bus/pci/$BUS; echo *`; do
- PCI_SLOT=$BUS:$SLOT_FUNC
- /sbin/hotplug pci
- done
- done
- fi
-
- return 0
-}
-
-# See how we were called.
-case "$1" in
- start)
- pci_boot_events
- ;;
- stop)
- # echo $"pci stop -- ignored"
- ;;
- status)
- echo $"PCI Status for kernel: " `uname -srm`
- echo ''
-
- if [ -f /proc/bus/pci/devices ]; then
- COUNT=`ls /proc/bus/pci | wc -l`
- if [ $COUNT -gt 1 ]; then
- COUNT=`expr $COUNT - 1`
- echo $"PCI up; bus count is $COUNT"
- if [ -x /sbin/lspci ]; then
- /sbin/lspci
- fi
- else
- echo $"no PCI busses?"
- fi
- echo ''
- else
- echo $"no PCI /proc support?"
- fi
- echo ''
-
- ;;
- restart)
- # always invoke by absolute path, else PATH=$PATH:
- $0 stop && $0 start
- ;;
- *)
- echo $"Usage: $0 {start|stop|status|restart}"
- exit 1
-esac
+++ /dev/null
-# isapnp module cardvendor carddevice driver_data vendor function ...
-irtty-sir 0xffff 0xffff 0x00000000 0xd041 0x1005
-irtty-sir 0xffff 0xffff 0x00000000 0xd041 0x1105
-floppy 0xffff 0xffff 0x00000000 0xd041 0x0007
-pcspkr 0xffff 0xffff 0x00000000 0xd041 0x0008
-rtc 0xffff 0xffff 0x00000000 0xd041 0x000b
-atkbd 0xffff 0xffff 0x00000000 0xd041 0x0303
-psmouse 0xffff 0xffff 0x00000000 0xd041 0x130f
-analog 0xffff 0xffff 0x00000000 0xd041 0x2fb0
+++ /dev/null
-#!/bin/sh
-# vim: syntax=sh
-#
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# Copyright (C) 2004 Alexander E. Patrakov (patrakov@ums.usu.ru)
-# Copyright (C) 2004 Simone Gotti (simone.gotti@email.it)
-# All Rights Reserved.
-#
-# Based on scripts by Simone Gotti, from:
-# http://members.xoom.virgilio.it/motaboy/hotplug-isapnp-0.2.1.tar.bz2
-#
-
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-
-if [ "$(echo /sys/bus/pnp/devices/*)" = "/sys/bus/pnp/devices/*" ]
-then
- exit 0
-fi
-
-cd /etc/hotplug
-. ./hotplug.functions
-
-MAP_CURRENT=$MODULE_DIR/modules.isapnpmap
-DRIVERS=
-
-# WARNING: od and printf are in /usr/bin
-decode_isapnp_vendor() {
- echo -n $1 | od -A n -t d1 | ( read A B C
- printf '%x\n' $(( ( ( $A & 0x3f ) << 2) | \
- ( ( $B & 0x18 ) >> 3) | \
- ( ( $B & 0x07 ) <<13) | \
- ( ( $C & 0x1f ) << 8) )) )
-}
-
-hex_swab() {
- echo `echo $1 | cut -b3-4``echo $1 | cut -b1-2`
-}
-
-#
-# stdin is "modules.isapnpmap" syntax
-# on return, ONE matching module was added to $DRIVERS
-#
-isapnp_map_modules ()
-{
- local module ignored
-
- CHECKED_ID="0x`echo $ISAPNP_ID | cut -b1-4`0x`echo $ISAPNP_ID | cut -b5-8`"
- # comment line lists (current) isapnp_device_id field names
- read ignored
-
- while read module cardvendor carddevice driver_data therest
- do
- # comments are lines that start with "#" ...
- # be careful, they still get parsed by bash!
- case "$module" in
- \#*) continue ;;
- esac
- : checkmatch $module
- set $therest
- while [ $# -gt 0 ]
- do
- id_temp=$2$1
- if [ "$id_temp" = "$CHECKED_ID" ] ; then
- DRIVERS="$module $DRIVERS"
- : drivers $DRIVERS
- break
- fi
- shift
- shift
- done
- done
-}
-
-
-isapnp_boot_events ()
-{
- cd /sys/bus/pnp/devices/
- for ISAPNP_DEVICE in * ; do
- ISAPNP_STRINGS=`cat $ISAPNP_DEVICE/id`
- for ISAPNP_STRING in $ISAPNP_STRINGS ; do
- rawcardvendor=`echo $ISAPNP_STRING | cut -b1-3`
- rawcarddevice=`echo $ISAPNP_STRING | cut -b4-7`
- cardvendor=`decode_isapnp_vendor $rawcardvendor`
- carddevice=`hex_swab $rawcarddevice`
- ISAPNP_ID=$carddevice$cardvendor
- LABEL="ISAPNP id $ISAPNP_ID"
- load_drivers isapnp $MAP_CURRENT "$LABEL"
- load_drivers isapnp /etc/hotplug/pnp.distmap "$LABEL"
- done
- done
- return 0
-}
-
-
-# See how we were called.
-case "$1" in
- start)
- isapnp_boot_events
- ;;
- stop)
- # echo $"isapnp stop -- ignored"
- ;;
- status)
- # echo $"isapnp status -- ignored"
- ;;
- restart)
- # always invoke by absolute path, else PATH=$PATH:
- $0 stop && $0 start
- ;;
- *)
- echo $"Usage: $0 {start|stop|status|restart}"
- exit 1
-esac
+++ /dev/null
-#!/bin/sh
-#
-# SCSI hotplug agent for 2.5 kernels
-#
-# ACTION=add
-# DEVPATH=devices/scsi0/0:0:0:0
-#
-
-cd /etc/hotplug
-. ./hotplug.functions
-
-case $ACTION in
-
-add)
- # 2.5.50 kernel bug: this happens sometimes
- if [ ! -d /sys/$DEVPATH ]; then
- mesg "bogus sysfs DEVPATH=$DEVPATH"
- exit 1
- fi
-
- TYPE_ATTR=/sys$DEVPATH/type
-
- # Possibly sleep here to try and avoid races with scsi attributes and block
- # devices
- count=120
- while [ ! -f $TYPE_ATTR ] && [ $count -gt 0 ]
- do
- # We seem to always hit this now, so don't output any message.
- debug_mesg "waiting for $TYPE_ATTR"
- sleep 1
- count=$(($count-1))
- done
-
- if [ ! -f $TYPE_ATTR ]
- then
- mesg "Attribute $TYPE_ATTR does not exist"
- exit 1
- fi
-
- TYPE=$(cat $TYPE_ATTR)
- case "$TYPE" in
- # 2.5.51 style attributes; <scsi/scsi.h> TYPE_* constants
- 0) TYPE=disk ; MODULE=sd_mod ;;
- # FIXME some tapes use 'osst' not 'st'
- 1) TYPE=tape ; MODULE=st ;;
- 2) TYPE=printer ;;
- 3) TYPE=processor ;;
- 4) TYPE=worm ; MODULE=sr_mod ;;
- 5) TYPE=cdrom ; MODULE=sr_mod ;;
- 6) TYPE=scanner ;;
- 7) TYPE=mod ; MODULE=sd_mod ;;
- 8) TYPE=changer ;;
- 9) TYPE=comm ;;
- 14) TYPE=enclosure ;;
- esac
- if [ "$MODULE" != "" ]; then
- mesg "$TYPE at $DEVPATH"
- modprobe $MODULE
- else
- debug_mesg "how to add device type=$TYPE at $DEVPATH ??"
- fi
- ;;
-
-*)
- debug_mesg SCSI $ACTION event not supported
- exit 1
- ;;
-
-esac
+++ /dev/null
-#!/bin/sh
-###############################################################################
-# Tape hotplug agent for Linux 2.4 kernels
-#
-# Copyright (c) 2002 IBM Development Germany, Boeblingen
-#
-# the GNU Public License applies
-#
-# Author: Stefan Bader <Stefan.Bader@de.ibm.com>, 2002
-#
-# History:
-# 2002-10-14 Stefan Bader <Stefan.Bader@de.ibm.com>
-# Fixed remove char case (missing statement)
-# 2002-10-01 Stefan Bader <Stefan.Bader@de.ibm.com>
-# Created inital version
-#
-# Generated by:
-# /usr/src/linux/drivers/s390/char/tape.c
-#
-# Evionment:
-# ACTION ::= add | remove
-# DEVNO ::= <4 digit hex number>
-# MAJOR ::= <dec major number>
-# MINOR ::= <dec minor number>
-# INTERFACE ::= char | block
-###############################################################################
-: ${ACTION?Bad invocation: \$ACTION is not set}
-: ${DEVNO?Bad invocation: \$DEVNO is not set}
-: ${MAJOR?Bad invocation: \$MAJOR is not set}
-: ${MINOR?Bad invocation: \$MINOR is not set}
-: ${INTERFACE?Bad invocation: \$INTERFACE is not set}
-
-# Convert to lowercase (just in case)
-DEVNO=$(echo $DEVNO | tr A-F a-f)
-
-cd /etc/hotplug
-. hotplug.functions
-
-mesg "$ACTION $DEVNO $MAJOR $MINOR $INTERFACE"
-
-if test -r tape.permissions; then
- . tape.permissions
-else
- mesg "Tape permission handling not found"
- exit 1
-fi
-
-#==============================================================================
-# To preserve the script from doing anything real, call it with
-# CONDOM=echo
-: ${CONDOM=}
-# To try things on an alternate location set ROOTDIR to a different base
-#: ${ROOTDIR=}
-: ${ROOTDIR=}
-# Abort on error or unset variables:
-set -o errexit
-set -o nounset
-#==============================================================================
-
-#------------------------------------------------------------------------------
-# Environment: none
-# Parameters : $1 : abort message
-# $2 : optional return code
-#------------------------------------------------------------------------------
-# Abort handling
-abort() {
- if test "$#" -lt 2; then
- RC=1
- else
- RC=$2
- fi
-
- mesg "$1 RC($RC)"
- exit $RC
-}
-
-#------------------------------------------------------------------------------
-# Environment: INTERFACE
-# MINOR
-# Parameters: none
-#
-# Prints: Tape number [0..127]
-# Returns: 0
-#------------------------------------------------------------------------------
-tape_number() {
- if test "$INTERFACE" = "block"; then
- echo $MINOR
- else
- echo "$(($MINOR / 2))"
- fi
- return 0
-}
-
-#------------------------------------------------------------------------------
-# Environment: ROOTDIR
-# DEVNO
-# CONDOM
-# Parameters: $1 : variable part of the link name
-# $2 : variable part of the target node name
-#
-# Creates a symbolic link to access the tape device by devno
-#
-# Prints: nothing
-# Returns: 0 on success, otherwise 1
-#------------------------------------------------------------------------------
-create_symlink() {
- LINK=$ROOTDIR/dev/tape/$DEVNO/$1
- TARGET=../../../$2$(tape_number)
-
- # Do not create link if devfs compatibility mode is not started
- if test ! -d $ROOTDIR/dev/tape; then
- return 0
- fi
-
- if test ! -d $(dirname $LINK); then
- $CONDOM mkdir -p $(dirname $LINK) || return 1
- fi
- mesg "Creating symlink $LINK -> $TARGET"
- $CONDOM rm -f $LINK || return 1
- $CONDOM ln -s $TARGET $LINK || return 1
-
- return 0
-}
-
-#------------------------------------------------------------------------------
-# Environment: MAJOR
-# MINOR
-# Parameters: $1 : node name
-# $2 : device type (b|c)
-#
-# Tests whether the node already exists with the correct type, major and minor
-#
-# Prints: nothing
-# Returns: 0 if the node is ok, otherwise 1
-#------------------------------------------------------------------------------
-verify_node() {
- NAME="$1"
- TYPE="$2"
- RC=1
-
- if test -$TYPE "$NAME"; then
- MAJMIN=$(ls -l "$NAME"|awk '{print $5 $6}')
-
- if test "$(echo $MAJMIN|cut -d, -f1)" = "$MAJOR"; then
- if test "$(echo $MAJMIN|cut -d, -f2)" = "$MINOR"; then
- RC=0
- fi
- fi
- fi
-
- return $RC
-}
-
-#------------------------------------------------------------------------------
-# Environment: ROOTDIR
-# INTERFACE
-# CONDOM
-# MAJOR
-# MINOR
-# OWNER
-# PERMISSIONS
-# Parameters: $1 : device type (b|c)
-# $2 : variable part of the device node name ([brn]tibm)
-#
-# Creates a device node for the tpae device (if it doesn't exist) and sets
-# the permissions.
-#
-# Prints: nothing
-# Returns: 0 on success, otherwise 1
-#------------------------------------------------------------------------------
-create_node() {
- TYPE="$1"
- NAME="$ROOTDIR/dev/$2$(tape_number)"
-
- # FIXME: This would currently recreate the device node if it isn't
- # right even if devfs compatibility isn't enabled. Should
- # ownership and permissions be preserved in that case???
- if ! verify_node $NAME $TYPE; then
- mesg "Creating devicenode $NAME"
- $CONDOM rm -f "$NAME" || return 1
- $CONDOM mknod "$NAME" $TYPE $MAJOR $MINOR || return 1
- fi
-
- # We only want to change ownership and permissions if devfs compa-
- # tibility is enabled.
- tape_permissions $DEVNO
- if test "$OWNER" != "" && test -d $ROOTDIR/dev/tape; then
- $CONDOM chown $OWNER "$NAME" || return 1
-
- if test "$PERMISSIONS" != ""; then
- $CONDOM chmod "$PERMISSIONS" "$NAME" || return 1
- fi
- fi
-
- return 0
-}
-
-#------------------------------------------------------------------------------
-# Main
-#------------------------------------------------------------------------------
-case "$ACTION" in
- add)
- case "$INTERFACE" in
- block)
- create_node b btibm || return 1
- create_symlink block/disc btibm || return 1
- ;;
- char)
- create_node c ntibm || return 1
- create_symlink char/norewind ntibm || return 1
- MINOR=$(($MINOR + 1))
- create_node c rtibm || return 1
- create_symlink char/rewind rtibm || return 1
- ;;
- *)
- abort "Unknown interface type <$INTERFACE>"
- ;;
- esac
- ;;
- remove)
- case "$INTERFACE" in
- char)
- $CONDOM rm -rf $ROOTDIR/dev/tape/$DEVNO/char
- if test -d $ROOTDIR/dev/tape; then
- $CONDOM rm -f \
- $ROOTDIR/dev/[nr]tibm$(tape_number)
- fi
- ;;
- block)
- $CONDOM rm -rf $ROOTDIR/dev/tape/$DEVNO/block
- if test -d $ROOTDIR/dev/tape; then
- $CONDOM \
- rm -f $ROOTDIR/dev/btibm$(tape_number)
- fi
- ;;
- *)
- abort "Unknown interface type <$INTERFACE>"
- ;;
- esac
-
- if test "$(ls $ROOTDIR/dev/tape/$DEVNO)" = ""; then
- $CONDOM rmdir $ROOTDIR/dev/tape/$DEVNO
- fi
- ;;
- *)
- abort "$(basename $0): $ACTION event not supported"
- ;;
-esac
-
-exit 0
-
+++ /dev/null
-#!/bin/sh
-#
-# Copyright (c) 2002 IBM Development Germany, Boeblingen
-#
-# Author: Stefan Bader <Stefan.Bader@de.ibm.com>
-#
-# the GNU Public License applies
-#
-tape_permissions() {
- DEVNO="$1"
-
- case "$DEVNO" in
- #
- # You could set other permissions to specific tape device
- # numbers here. E.g. the following would override the default
- # for tape 1a32
- #
- # 1a32) OWNER=nobody.users PERMISSIONS="u=rw,go=";;
-
- *) OWNER=root.root PERMISSIONS="ug=rw,o=";;
- esac
-
- return 0
-}
+++ /dev/null
-#!/bin/sh
-#
-# USB-specific hotplug policy agent.
-#
-# This should handle 2.2.18+, 2.4.*, and 2.5.* USB hotplugging,
-# with a consistent framework for adding device and driver
-# specific handling.
-#
-# Normally, adding a usb device will modprobe a driver. If there
-# is a /etc/hotplug/usb/$DRIVER script set up, it will also run,
-# handling tasks like loading firmware or starting daemons.
-#
-# Kernel USB hotplug params include:
-#
-# ACTION=%s [add or remove]
-# DEVPATH=%s [in 2.5 kernels, /sys/$DEVPATH]
-# PRODUCT=%x/%x/%x
-# INTERFACE=%d/%d/%d [ for interface 0, if TYPE=0/*/* ]
-# TYPE=%d/%d/%d
-#
-# And if usbfs (originally called usbdevfs) is configured, also:
-#
-# DEVFS=/proc/bus/usb [gone in 2.5]
-# DEVICE=/proc/bus/usb/%03d/%03d
-#
-# This script then adds the variable:
-#
-# REMOVER=/var/run/usb/<some string unique to $DEVICE>
-#
-# This is the path where the script would like to find a remover, if
-# the target device needs one. This script is executed on remove if
-# it is executable when the remove happens.
-#
-# If usbfs is mounted on /proc/bus/usb, $DEVICE is a file which
-# can be read to get the device's current configuration descriptor.
-# (The "usbmodules" utility does that.) Or it can be used by a
-# user mode driver to interact with the usb device. USB hotplug
-# does *not* require usbfs (or sysfs) to work, although on 2.4
-# some devices work better if "usbmodules" can help.
-#
-# For Linux 2.5+ kernels, there's no need for "usbmodules". For
-# two reasons: first, hotplug is invoked for each interface, not
-# just the first one. Second, sysfs exposes descriptors so they
-# are easy to use for "coldplug" event simulation. (But sysfs is
-# not a replacement for the driver I/O capabilities in usbfs.)
-#
-# On systems using Linux 2.4.* kernels, be sure to use the right
-# modutils (2.4.2+). That ensures that hotplugging uses the list
-# of modules installed for your kernel, rather than the one that's
-# included here for use on systems without MODULE_DEVICE_TABLE
-# support.
-#
-#
-# HISTORY:
-#
-# 20-Nov-2002 some 2.5 updates; handle new 'device' hotplug; turn off
-# 'sleep' hack since hcds must all queue control traffic
-# 08-Aug-2002 support for multiple usermaps (maxk), minor cleanup
-# 18-Jan-2002 fix match algorithm in usb_map_modules()
-# 14-Jan-2002 fix work around 2.2 brokeness of $PRODUCT
-# 09-Jan-2002 REMOVER for system without usbdevfs
-#
-# 14-Mar-2001 Cleanup, bitmask the match_flags
-# 26-Feb-2001 Cleanup, support comments (Gioele Barabucci)
-# 15-Feb-2001 Remove use of "<<" (Adam Richter)
-# 23-Jan-2001 Update 2.2 handling; unfortunately there's no "feature
-# test" that can work robustly
-# 05-Jan-2001 Quick hack for kernel 2.4.0 and modutils 2.4.1
-# 03-Jan-2001 Initial version of "new" hotplug agent, using feedback
-# and contributions from Adam Richter, Ryan VanderBijl,
-# Norbert Preining, Florian Lohoff, David Brownell and
-# others. To replace the original /etc/usb/policy. (db)
-#
-# $Id: usb.agent,v 1.43 2004/09/20 22:50:11 kroah Exp $
-#
-
-if [ -f /etc/sysconfig/usb ]; then
- . /etc/sysconfig/usb
-fi
-if [ -f /etc/conf.d/usb ]; then
- . /etc/conf.d/usb
-fi
-
-cd /etc/hotplug
-. ./hotplug.functions
-# DEBUG=yes export DEBUG
-
-# generated by modutils, for current 2.4.x (and later) kernels
-MAP_CURRENT=$MODULE_DIR/modules.usbmap
-
-# used if MAP_CURRENT is missing; for 2.2.x kernels
-MAP_DISTMAP=$HOTPLUG_DIR/usb.distmap
-
-#
-# used for kernel drivers that don't show up in CURRENT or DISTMAP,
-# currently input drivers (joysticks, keyboards, etc). newer systems
-# should use input hotplug events instead.
-#
-MAP_HANDMAP=$HOTPLUG_DIR/usb.handmap
-
-#
-# used to run config scripts for user mode drivers (jPhoto, gPhoto2,
-# rio500 tools, etc) ... instead of naming kernel modules, it names
-# config scripts. those could change $DEVICE permissions, etc.
-#
-# for purely user mode drivers, scripts $HOTPLUG_DIR/usb/NAME should be
-# installed with usermap files in $HOTPLUG_DIR/usb/NAME.usermap instead
-# of continuing to use/modify $MAP_USERMAP
-#
-MAP_USERMAP=$HOTPLUG_DIR/usb.usermap
-
-
-# accumulates list of modules we may care about
-DRIVERS=""
-
-if [ "$ACTION" = "" ]; then
- mesg Bad USB agent invocation, no action
- exit 1
-fi
-
-# starting in kernel 2.5 there are two kinds of USB hotplug events.
-# - per-interface; 2.2/2.4 kernels only reported the first one.
-# "new" events have nonzero /sys/$DEVPATH/bInterfaceNumber
-# - per-device; "new" events don't have $PRODUCT
-SYSFS=/sys
-if [ "$PRODUCT" = "" ]; then
- # this is either an error, or we're on a 2.5 system...
- if [ "$DEVPATH" = "" ]; then
- mesg Bad USB agent invocation
- exit 1
- fi
-
- # sysfs files may already be gone
- if [ $ACTION = 'remove' ]; then
- exit 0
- fi
-
- # we could be running before usb populated these attributes...
- if [ ! -f $SYSFS/$DEVPATH/bNumConfigurations ]; then
- # FIXME wait till they appear, or N seconds elapse
- sleep 2
- fi
-
- # this could care about changing the default config, or warning
- # when the user hooked a fast device up so it runs slowly.
- if [ ! -f $SYSFS/$DEVPATH/bNumConfigurations ]; then
- exit 0
- fi
- TMP=$(cat $SYSFS/$DEVPATH/bNumConfigurations)
- if [ $TMP -ne 1 ] && [ "$ACTION" = add ]; then
- mesg Keeping default configuration with $SYSFS/$DEVPATH
- fi
-
- # NOTE: it might be good to add an extension hook here rather
- # than ignore these events, but even device-scope tasks such
- # as firmware download can still use the interface-0 event
- # (as they did with 2.2/2.4 hotplug setup scripts).
- exit 0
-fi
-
-# we can't "unset IFS" on bash1, so save a copy
-DEFAULT_IFS="$IFS"
-
-#
-# Each modules.usbmap format line corresponds to one entry in a
-# MODULE_DEVICE_TABLE(usb,...) declaration in a kernel file.
-#
-# Think of it as a database column with up to three "match specs"
-# to associate kernel modules with particular devices or classes
-# of device. The match specs provide a reasonably good filtering
-# mechanism, but some driver probe() routines need to provide
-# extra filtering.
-#
-
-usb_convert_vars ()
-{
- # work around 2.2.early brokenness
- # munges the usb_bcdDevice such that it is a integer rather
- # than a float: e.g. 1.0 become 0100
- PRODUCT=`echo $PRODUCT | sed -e "s+\.\([0-9]\)$+.\10+" -e "s/\.$/00/" \
- -e "s+/\([0-9]\)\.\([0-9][0-9]\)+/0\1\2+" \
- -e "s+/\([0-9][0-9]\)\.\([0-9][0-9]\)+/\1\2+"`
- set $(echo $PRODUCT | sed -e 's+\([^/]*\)/\([^/]*\)/\(.*\)+\1 \2 \3+')
- usb_idVendor=$((0x$1))
- usb_idProduct=$((0x$2))
- usb_bcdDevice=$((0x$3))
-
- if [ "$TYPE" != "" ]; then
- IFS=/
- set $TYPE ''
- usb_bDeviceClass=$1
- usb_bDeviceSubClass=$2
- usb_bDeviceProtocol=$3
- IFS="$DEFAULT_IFS"
- elif [ -r $SYSFS/$DEVPATH/bDeviceClass ]; then
- usb_bDeviceClass=$((0x$(cat $SYSFS/$DEVPATH/bDeviceClass)))
- usb_bDeviceSubClass=$((0x$(cat $SYSFS/$DEVPATH/bDeviceSubClass)))
- usb_bDeviceProtocol=$((0x$(cat $SYSFS/$DEVPATH/bDeviceProtocol)))
- else
- # out-of-range values
- usb_bDeviceClass=1000
- usb_bDeviceSubClass=1000
- usb_bDeviceProtocol=1000
- fi
-
- if [ "$INTERFACE" != "" ]; then
- IFS=/
- set $INTERFACE ''
- usb_bInterfaceClass=$1
- usb_bInterfaceSubClass=$2
- usb_bInterfaceProtocol=$3
- IFS="$DEFAULT_IFS"
- elif [ -r $SYSFS/$DEVPATH/bInterfaceClass ]; then
- usb_bInterfaceClass=$((0x$(cat $SYSFS/$DEVPATH/bInterfaceClass)))
- usb_bInterfaceSubClass=$((0x$(cat $SYSFS/$DEVPATH/bInterfaceSubClass)))
- usb_bInterfaceProtocol=$((0x$(cat $SYSFS/$DEVPATH/bInterfaceProtocol)))
- else
- # out-of-range values
- usb_bInterfaceClass=1000
- usb_bInterfaceSubClass=1000
- usb_bInterfaceProtocol=1000
- fi
-}
-
-USB_MATCH_VENDOR=$((0x0001))
-USB_MATCH_PRODUCT=$((0x0002))
-USB_MATCH_DEV_LO=$((0x0004))
-USB_MATCH_DEV_HI=$((0x0008))
-USB_MATCH_DEV_CLASS=$((0x0010))
-USB_MATCH_DEV_SUBCLASS=$((0x0020))
-USB_MATCH_DEV_PROTOCOL=$((0x0040))
-USB_MATCH_INT_CLASS=$((0x0080))
-USB_MATCH_INT_SUBCLASS=$((0x0100))
-USB_MATCH_INT_PROTOCOL=$((0x0200))
-
-#
-# stdin is "modules.usbmap" syntax
-# on return, all matching modules were added to $DRIVERS
-#
-usb_map_modules ()
-{
- # look at each usb_device_id entry
- # collect all matches in $DRIVERS
-
- while read line
- do
- # comments are lines that start with "#" ...
- # be careful, they still get parsed by bash!
- case "$line" in
- \#*) continue ;;
- "") continue ;;
- esac
-
- set $line
-
- module=$1
- match_flags=$(($2))
-
- idVendor=$(($3))
- idProduct=$(($4))
- bcdDevice_lo=$(($5))
- bcdDevice_hi=$(($6))
-
- bDeviceClass=$(($7))
- bDeviceSubClass=$(($8))
- bDeviceProtocol=$(($9))
-
- shift 9
- bInterfaceClass=$(($1))
- bInterfaceSubClass=$(($2))
- bInterfaceProtocol=$(($3))
-
- : checkmatch $module
-
- : idVendor $idVendor $usb_idVendor
- if [ $USB_MATCH_VENDOR -eq $(( $match_flags & $USB_MATCH_VENDOR )) ] &&
- [ $idVendor -ne $usb_idVendor ]; then
- continue
- fi
-
- : idProduct $idProduct $usb_idProduct
- if [ $USB_MATCH_PRODUCT -eq $(( $match_flags & $USB_MATCH_PRODUCT )) ] &&
- [ $idProduct -ne $usb_idProduct ]; then
- continue
- fi
-
- : bcdDevice range $bcdDevice_hi $bcdDevice_lo actual $usb_bcdDevice
- if [ $USB_MATCH_DEV_LO -eq $(( $match_flags & $USB_MATCH_DEV_LO )) ] &&
- [ $usb_bcdDevice -lt $bcdDevice_lo ]; then
- continue
- fi
-
- # bcdDevice_lo <= bcdDevice <= bcdDevice_hi
- if [ $USB_MATCH_DEV_HI -eq $(( $match_flags & $USB_MATCH_DEV_HI )) ] &&
- [ $usb_bcdDevice -gt $bcdDevice_hi ]; then
- continue
- fi
-
- : bDeviceClass $bDeviceClass $usb_bDeviceClass
- if [ $USB_MATCH_DEV_CLASS -eq $(( $match_flags & $USB_MATCH_DEV_CLASS )) ] &&
- [ $bDeviceClass -ne $usb_bDeviceClass ]; then
- continue
- fi
- : bDeviceSubClass $bDeviceSubClass $usb_bDeviceSubClass
- if [ $USB_MATCH_DEV_SUBCLASS -eq $(( $match_flags & $USB_MATCH_DEV_SUBCLASS )) ] &&
- [ $bDeviceSubClass -ne $usb_bDeviceSubClass ]; then
- continue
- fi
- : bDeviceProtocol $bDeviceProtocol $usb_bDeviceProtocol
- if [ $USB_MATCH_DEV_PROTOCOL -eq $(( $match_flags & $USB_MATCH_DEV_PROTOCOL )) ] &&
- [ $bDeviceProtocol -ne $usb_bDeviceProtocol ]; then
- continue
- fi
-
- # NOTE: for now, this only checks the first of perhaps
- # several interfaces for this device.
-
- : bInterfaceClass $bInterfaceClass $usb_bInterfaceClass
- if [ $USB_MATCH_INT_CLASS -eq $(( $match_flags & $USB_MATCH_INT_CLASS )) ] &&
- [ $bInterfaceClass -ne $usb_bInterfaceClass ]; then
- continue
- fi
- : bInterfaceSubClass $bInterfaceSubClass $usb_bInterfaceSubClass
- if [ $USB_MATCH_INT_SUBCLASS -eq $(( $match_flags & $USB_MATCH_INT_SUBCLASS )) ] &&
- [ $bInterfaceSubClass -ne $usb_bInterfaceSubClass ]; then
- continue
- fi
- : bInterfaceProtocol $bInterfaceProtocol $usb_bInterfaceProtocol
- if [ $USB_MATCH_INT_PROTOCOL -eq $(( $match_flags & $USB_MATCH_INT_PROTOCOL )) ] &&
- [ $bInterfaceProtocol -ne $usb_bInterfaceProtocol ]; then
- continue
- fi
-
- # It was a match!
- DRIVERS="$module $DRIVERS"
- : drivers $DRIVERS
- done
-}
-
-#
-# declare a REMOVER name that the add action can use to create a
-# remover, or that the remove action can use to execute a remover.
-#
-if [ "$DEVPATH" != "" ]; then
- # probably, 2.6.x
- REMOVER=/var/run/usb/$(readlink -f $SYSFS/$DEVPATH | sed -e 's;/;%;g')
-elif [ "$DEVICE" != "" ]; then
- # 2.4.x?
- REMOVER=/var/run/usb/$(echo $DEVICE | sed -e 's;/;%;g')
-else
- # should not happen?
- REMOVER=/var/run/usb/$(echo "$INTERFACE/$PRODUCT/$TYPE" | sed -e 's;/;%;g')
-fi
-export REMOVER
-
-#
-# What to do with this USB hotplug event?
-#
-case $ACTION in
-
-add)
- # partial workaround for 2.4 uhci/usb-uhci driver problem: they don't
- # queue control requests, so device drivers can confuse each other if
- # they happen to issue requests at the same time ... it happens easily
- # with slow HID devices and "usbmodules".
- # starting with 2.5 (DEVPATH set), all hcds must queue control traffic.
- if [ "$DEVPATH" = "" ]; then
- sleep 3
- fi
-
- usb_convert_vars
-
- FOUND=false
- if [ -f $SYSFS/$DEVPATH/manufacturer ]; then
- LABEL="USB `cat $SYSFS/$DEVPATH/manufacturer` `cat $SYSFS/$DEVPATH/product`"
- else
- LABEL="USB product $PRODUCT"
- fi
-
- if [ -e "$REMOVER" ]; then
- rm -f "$REMOVER"
- fi
-
- # on 2.4 systems, modutils 2.4.2+ maintains MAP_CURRENT
- # ... otherwise we can't rely on it (sigh)
- case "$KERNEL" in
- 2.4.*|2.5.*|2.6.*)
- if [ -r $MAP_CURRENT ]; then
- load_drivers usb $MAP_CURRENT "$LABEL"
- fi;;
- *)
- if [ -r $MAP_DISTMAP ]; then
- load_drivers usb $MAP_DISTMAP "$LABEL"
- fi;;
- esac
- if [ "$DRIVERS" != "" ]; then
- FOUND=true
- fi
-
- # cope with special driver module configurations
- # (mostly HID devices, until we have an input.agent)
- # not needed on 2.6 - they are loaded by hotplug
- case "$KERNEL" in
- 2.6.* )
- : nothing
- ;;
- * )
- if [ -r $MAP_HANDMAP ]; then
- load_drivers usb $MAP_HANDMAP "$LABEL"
- if [ "$DRIVERS" != "" ]; then
- FOUND=true
- fi
- fi
- ;;
- esac
-
- # some devices have user-mode drivers (no kernel module, but config)
- # or specialized user-mode setup helpers
- MODPROBE=:
- for MAP in $MAP_USERMAP $HOTPLUG_DIR/usb/*.usermap
- do
- if [ -r $MAP ]; then
- load_drivers usb $MAP "$LABEL"
- if [ "$DRIVERS" != "" ]; then
- FOUND=true
- fi
- fi
- done
-
- if [ "$FOUND" = "false" ]; then
- debug_mesg "... no modules for $LABEL"
- exit 2
- fi
- ;;
-
-remove)
- if [ -x $REMOVER ]; then
- $REMOVER
- fi
- rm -f $REMOVER
-
- if [ -x /usr/sbin/updfstab ]; then
- /usr/sbin/updfstab
- fi
- ;;
-
-*)
- debug_mesg USB $ACTION event not supported
- exit 1
- ;;
-
-esac
+++ /dev/null
-# usb module match_flags idVendor idProduct bcdDevice_lo bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
-iforce 0x0003 0x046d 0xc281 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-cpia_usb 0x0003 0x0553 0x0002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-acm 0x0070 0x0000 0x0000 0x0000 0x0000 0x02 0x00 0x00 0x00 0x00 0x00 0x00000000
-audio 0x0180 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x01 0x01 0x00 0x00000000
-bluetooth 0x0070 0x0000 0x0000 0x0000 0x0000 0xe0 0x01 0x01 0x00 0x00 0x00 0x00000000
-dabusb 0x0003 0x0547 0x2131 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-dabusb 0x0003 0x0547 0x9999 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-dc2xx 0x0003 0x040a 0x0120 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-dc2xx 0x0003 0x040a 0x0130 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-dc2xx 0x0003 0x040a 0x0131 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-dc2xx 0x0003 0x040a 0x0132 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-dc2xx 0x0003 0x040a 0x0100 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-dc2xx 0x0003 0x040a 0x0110 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-dc2xx 0x0003 0x040a 0x0111 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-dc2xx 0x0003 0x040a 0x0112 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-dc2xx 0x0003 0xf003 0x6002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-dsbr100 0x0003 0x04b4 0x1002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-hid 0x0080 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x03 0x00 0x00 0x00000000
-ibmcam 0x000f 0x0545 0x8080 0x0002 0x0002 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-ibmcam 0x000f 0x0545 0x8080 0x030a 0x030a 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x03e8 0x0008 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x0506 0x03e8 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x0557 0x2002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x0557 0x4000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x0565 0x0002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x0565 0x0005 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x05e9 0x0008 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x06e1 0x0008 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x0707 0x0100 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x07aa 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x0846 0x1001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x13d2 0x0400 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x066b 0x2202 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x1645 0x0005 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x2001 0x4000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-kaweth 0x0003 0x07b8 0x4000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-mdc800 0x0003 0x055f 0xa800 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-microtek 0x0003 0x04ce 0x0300 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-microtek 0x0003 0x05da 0x0094 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-microtek 0x0003 0x05da 0x0099 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-microtek 0x0003 0x05da 0x009a 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-microtek 0x0003 0x05da 0x00a0 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-microtek 0x0003 0x05da 0x00a3 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-microtek 0x0003 0x05da 0x80a3 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-microtek 0x0003 0x05da 0x80ac 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-ov511 0x0003 0x05a9 0x0511 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-ov511 0x0003 0x05a9 0xa511 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-ov511 0x0003 0x0813 0x0002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x083a 0x1046 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x07a6 0x8511 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x07a6 0x0986 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x08dd 0x0986 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x08dd 0x0987 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x08dd 0x0988 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x08dd 0x8511 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x07aa 0x0004 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x2001 0x4001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x2001 0x4002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x2001 0x4003 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x2001 0xabc1 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x07b8 0xabc1 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x07b8 0x4002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x04bb 0x0904 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x056e 0x4002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x066b 0x2202 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x066b 0x2203 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x066b 0x2204 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x066b 0x2206 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x0411 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x0707 0x0200 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-pegasus 0x0003 0x15e8 0x9100 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-printer 0x0070 0x0000 0x0000 0x0000 0x0000 0x07 0x01 0x01 0x00 0x00 0x00 0x00000000
-printer 0x0070 0x0000 0x0000 0x0000 0x0000 0x07 0x01 0x02 0x00 0x00 0x00 0x00000000
-printer 0x0070 0x0000 0x0000 0x0000 0x0000 0x07 0x01 0x03 0x00 0x00 0x00 0x00000000
-printer 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x07 0x01 0x01 0x00000000
-printer 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x07 0x01 0x02 0x00000000
-printer 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x07 0x01 0x03 0x00000000
-rio500 0x0003 0x0841 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x04a5 0x2060 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x04a5 0x2040 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x04a5 0x2022 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x06bd 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x06bd 0x0002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x06bd 0x2061 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x06bd 0x0100 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0458 0x2001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x03f0 0x0205 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x03f0 0x0101 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x03f0 0x0105 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x03f0 0x0102 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x03f0 0x0401 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x03f0 0x0701 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x03f0 0x0201 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x03f0 0x0601 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0638 0x0268 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x05da 0x0099 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x05da 0x0094 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x05da 0x00a0 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x05da 0x009a 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x05da 0x00a3 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x05da 0x80a3 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x05da 0x80ac 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x055f 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0400 0x1000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x055f 0x0002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x055f 0x0003 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x055f 0x0006 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0461 0x0300 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0461 0x0380 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0461 0x0301 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0461 0x0381 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0461 0x0302 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0461 0x0382 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0461 0x0303 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0461 0x0383 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0461 0x0340 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0461 0x0360 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0461 0x0341 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x0461 0x0361 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x04b8 0x0101 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x04b8 0x0103 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x04b8 0x0104 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x04b8 0x0106 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x04b8 0x0107 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x1606 0x0010 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x1606 0x0030 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x1606 0x0230 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x04a7 0x0221 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x04a7 0x0211 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x04a7 0x0231 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x04a7 0x0311 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x04a7 0x0321 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-scanner 0x0003 0x04a7 0x0331 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-belkin_sa 0x0003 0x050d 0x0103 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-belkin_sa 0x0003 0x056c 0x8007 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-belkin_sa 0x0003 0x0565 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-digi_acceleport 0x0003 0x05c5 0x0002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-digi_acceleport 0x0003 0x05c5 0x0004 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-empeg 0x0003 0x084f 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-ftdi_sio 0x0003 0x0403 0x8372 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-ftdi_sio 0x0003 0x0403 0x6001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-keyspan 0x0003 0x06cd 0x0105 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-keyspan 0x0003 0x06cd 0x0103 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-keyspan 0x0003 0x06cd 0x0106 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-keyspan 0x0003 0x06cd 0x0101 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-keyspan 0x0003 0x06cd 0x0102 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-keyspan 0x0003 0x06cd 0x0109 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-keyspan 0x0003 0x06cd 0x0112 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-keyspan 0x0003 0x06cd 0x0107 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-keyspan 0x0003 0x06cd 0x0108 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-keyspan 0x0003 0x06cd 0x010f 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-keyspan 0x0003 0x06cd 0x0110 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-keyspan 0x0003 0x06cd 0x010a 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-keyspan_pda 0x0003 0x06cd 0x0103 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-keyspan_pda 0x0003 0x06cd 0x0104 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-mct_u232 0x0003 0x0711 0x0210 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-mct_u232 0x0003 0x0711 0x0230 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-mct_u232 0x0003 0x0711 0x0200 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-omninet 0x0003 0x0586 0x1000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-visor 0x0003 0x082d 0x0100 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-whiteheat 0x0003 0x0710 0x8001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-whiteheat 0x0003 0x0710 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x03ee 0x0000 0x0000 0x0245 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x03f0 0x0107 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x04e6 0x0001 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x04e6 0x0002 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x04e6 0x0006 0x0100 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x04e6 0x0007 0x0100 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x04e6 0x0009 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x04e6 0x000a 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x04e6 0x000b 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x04e6 0x000c 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x04e6 0x0101 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x054c 0x0010 0x0106 0x0210 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x054c 0x002d 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x057b 0x0000 0x0000 0x0299 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x057b 0x0000 0x0300 0x9999 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x059f 0xa601 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x05ab 0x0031 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x0644 0x0000 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x0693 0x0002 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x0693 0x0005 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x0781 0x0001 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x0781 0x0100 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x0781 0x0002 0x0009 0x0009 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x07af 0x0004 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x000f 0x07af 0x0005 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x01 0x01 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x02 0x01 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x03 0x01 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x04 0x01 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x05 0x01 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x06 0x01 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x01 0x00 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x02 0x00 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x03 0x00 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x04 0x00 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x05 0x00 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x06 0x00 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x01 0x50 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x02 0x50 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x03 0x50 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x04 0x50 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x05 0x50 0x00000000
-usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x06 0x50 0x00000000
-usb-storage 0x000f 0x0ea0 0x06803 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usbcore 0x0080 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x09 0x00 0x00 0x00000000
-usbnet 0x0003 0x0547 0x2720 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00002a08
-usbnet 0x0003 0x0525 0x1080 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00002cf0
-usbnet 0x0003 0x067b 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00002d70
-usbnet 0x0003 0x067b 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00002d70
-uss720 0x0003 0x047e 0x1001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-uss720 0x0003 0x0557 0x2001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-uss720 0x0003 0x0729 0x1284 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-wacom 0x0003 0x056a 0x0010 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-wacom 0x0003 0x056a 0x0020 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000001
-wacom 0x0003 0x056a 0x0021 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000002
-wacom 0x0003 0x056a 0x0022 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000003
-wacom 0x0003 0x056a 0x0023 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000004
-wacom 0x0003 0x056a 0x0024 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000005
-stir4200 0x0003 0x066f 0x4200 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+++ /dev/null
-#
-# This file contains modutils format usbmap entries
-# with special driver mappings that the kernel
-# for some reason does not expose through modutils
-#
-# Comments get read by bash so dont use punctuation
-# RETEST ESPECIALLY AFER CHANGES TO COMMENTS
-#
-#
-# usbcore hub driver metadata passes different metadata than
-# policy agents see unless extra data from usbdevfs can be used
-#
-usbcore 0x0090 0x0000 0x0000 0x0000 0x0000 0x09 0x00 0x00 0x09 0x00 0x00 0x00000000
-#
-# recognize keyboard and mouse boot protocols to avoid
-# parsing all HID descriptors
-#
-keybdev 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x03 0x01 0x01 0x00000000
-mousedev 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x03 0x01 0x02 0x00000000
-#
-# In the big picture not many HID devices are keyboards or mice
-# HID device classes are defined with HID reports and so far
-# there is no hotplugging support for hid or the input subsystem
-#
-# This section mapping HID devices to their input subsystem
-# handlers will probably grow a lot
-#
-# FIXME describe each device by vendor and product name
-# PLEASE DO NOT SUBMIT ANY MORE PATCHES WITHOUT SUCH COMMENTS
-#
-mousedev 0x0003 0x05a4 0x9998 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-joydev 0x0003 0x046d 0xc207 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-joydev 0x0003 0x045e 0x0008 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-joydev 0x0003 0x047d 0x3002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-joydev 0x0003 0x07b5 0x9902 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Saitek Cyborg 3D USB
-joydev 0x0003 0x06a3 0x0006 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-#Gravis Gamepad Pro
-joydev 0x0003 0x0428 0x4001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Wacom tablets need "evdev" but don't depend on it;
-# XFree86 wacom_drv needs both.
-evdev 0x0003 0x056a 0x0010 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-evdev 0x0003 0x056a 0x0020 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-evdev 0x0003 0x056a 0x0021 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-evdev 0x0003 0x056a 0x0022 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-evdev 0x0003 0x056a 0x0023 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-evdev 0x0003 0x056a 0x0024 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-evdev 0x0003 0x056a 0x0011 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-evdev 0x0003 0x056a 0x0042 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-usblcd 0x0003 0x1212 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+++ /dev/null
-#!/bin/sh
-# vim: syntax=sh
-#
-# usb.rc This brings the USB subsystem up and down safely.
-#
-# $Id: usb.rc,v 1.28 2004/09/20 22:30:35 kroah Exp $
-#
-# Best invoked via /etc/init.d/hotplug or equivalent, with
-# writable /tmp, /usr mounted, and syslogging active.
-#
-# Bus management is basically unrelated to runlevel changes; it
-# relates to physical topology, including possibly hotpluggable
-# busses (USB, Cardbus) or controllers. If a bus is physically
-# present, it should normally be available.
-#
-# USB-dependant systems (iMacs, "legacy free" x86 systems, and so on)
-# should statically link USB keyboard support into the kernel (USB core,
-# EHCI/OHCI/UHCI/..., hid, input, keybdev; and likely mousedev) so the
-# system console can't be removed by accident.
-
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-
-unset I_WANT_A_BROKEN_PS
-PS_PERSONALITY=linux
-
-STATIC_MODULE_LIST=
-X11_USBMICE_HACK=false
-
-# override any of the defaults above?
-if [ -f /etc/sysconfig/usb ]; then
- . /etc/sysconfig/usb
-fi
-if [ -f /etc/conf.d/usb ]; then
- . /etc/conf.d/usb
-fi
-
-
-MOUSE_MODULES="mousedev input"
-
-# In its currently-recommended configuration, XFree86 3.3.6 always opens
-# /dev/input/mice; so mousedev and input must be loaded before X11 starts.
-if [ $X11_USBMICE_HACK = true ]; then
- STATIC_MODULE_LIST="$MOUSE_MODULES $STATIC_MODULE_LIST"
-fi
-
-
-#
-# "COLD PLUG" ... recovery from partial USB init that may have happened
-# before the OS could really handle hotplug, perhaps because /sbin or
-# $HOTPLUG_DIR wasn't available or /tmp wasn't writable. When/if the
-# /sbin/hotplug program is invoked then, hotplug event notifications
-# get dropped. To make up for such "cold boot" errors, we synthesize
-# all the hotplug events we expect to have seen already. They can be
-# out of order, and some might be duplicates.
-#
-# Note that on 2.5 the init filesystem may have loaded some of the more
-# essential usb drivers (maybe usb-storage for a boot disk, and hid),
-# but we may still need to load less important ones or invoke setup
-# scripts that couldn't run earlier.
-#
-usb_boot_events ()
-{
- #
- # FIXME on 2.5, /sys/bus/usb/devices/* gives all of the
- # info we need. Interface hotplug events come from the
- # "*:*" files, and device events (do them first) come
- # from the others.
- #
- # don't expect usbmodules to exist!! and remove the
- # dependency (below) on usbfs to decide whether we should
- # be synthesizing coldplug events.
- #
-
- # synthesize hotplug events if we can
-
- # make sure the usb agent will run
- ACTION=add
- PRODUCT=0/0/0
- TYPE=
- INTERFACE=
- DEVPATH=
- DEVFS=/proc/bus/usb
- DEVICE=
- export ACTION PRODUCT TYPE INTERFACE DEVPATH DEVFS DEVICE
-
- if [ -d /sys/bus ]; then
- if [ -d /sys/bus/usb/devices ]; then
- cd /sys/bus/usb/devices
- for device in /sys/bus/usb/devices/[0-9]*; do
- devlink=$( readlink -f $device )
- DEVPATH=${devlink#/sys}
- if [ -f $devlink/../idVendor ]; then
- PRODUCT="$(cat $devlink/../idVendor)/$(cat $devlink/../idProduct)/$(cat $devlink/../bcdDevice)"
- if [ -f $devlink/../../devnum ]
- then
- devbus=$( ( echo -n 000 ; cat $devlink/../../devnum ) | grep -o ...\$ )
- devdev=$( ( echo -n 000 ; cat $devlink/../devnum ) | grep -o ...\$ )
- DEVICE="/proc/bus/usb/$devbus/$devdev"
- else
- DEVICE=
- fi
- /etc/hotplug/usb.agent
- fi
- done
- fi
- else
- # we need (non-bash) programs to parse descriptors.
- LISTER=`which usbmodules`
- if [ "$LISTER" = "" ] || [ ! -f /proc/bus/usb/devices ]; then
- echo $"** can't synthesize root hub events"
- return
- fi
- for DEVICE in /proc/bus/usb/*/*; do
- /etc/hotplug/usb.agent
- done
- fi
-}
-
-
-maybe_start_usb ()
-{
- COUNT=0
-
- # if USB is partially initted then synthesize "cold plug" events. the
- # kernel probably dropped many "hot plug" events, and those it didn't
- # drop likely couldn't trigger all the setup actions (kicking daemons,
- # dropping config records, and so on).
-
- # if it's not initted at all (no hcds loaded) no synthesized events
- # will be needed, we'll see real ones. knowing that there are no
- # hcds available through version-portable logic is a nightmare, so
- # assume we synthesize unless "usbfs" is clearly not initted (which
- # we currently need when synthesizing, anyway).
-
- SYNTHESIZE=true
- if [ ! -d /proc/bus/usb ]; then
- SYNTHESIZE=false
- fi
-
- # if distro hasn't already done part of this ... load core,
- # and mount usbfs before the first hotplug agent fires
- # (so it'll be available to the agents).
- modprobe -q usbcore >/dev/null 2>&1
- if [ -d /proc/bus/usb ]; then
- # if it's not mounted, try to mount it
- if [ -z "`grep " /proc/bus/usb " /proc/mounts`" ]; then
- if grep -q -E "^[^#][^[:space:]]+[[:space:]]+/proc/bus/usb/?[[:space:]]" /etc/fstab; then
- mount /proc/bus/usb
- else
- if grep -q usbfs /proc/filesystems; then
- mount -t usbfs usbfs /proc/bus/usb
- else
- mount -t usbdevfs usbdevfs /proc/bus/usb
- fi
- fi
- fi
- fi
-
- # Load Host Controller Drivers (HCDs) ... this automatically handles
- # systems with multiple controllers (EHCI, OHCI, UHCI) without needing
- # /proc or tools (lspci -v|grep USB, etc) to do so. If hotplugging
- # is enabled on this system, initting a root hub will cause hotplug
- # events to fire for every device on the tree at that root.
-
- # FIXME: some of this should be driven by PCI hotplugging, and have
- # the blacklist control which uhci driver gets used (before 2.5).
-
- # "new style" HCDs ... more common code
- modprobe -q ehci-hcd >/dev/null 2>&1
- modprobe -q ohci-hcd >/dev/null 2>&1
- modprobe -q uhci-hcd >/dev/null 2>&1
-
- # "old style" HCDs ... more driver-specific bugs
- modprobe -q usb-ohci >/dev/null 2>&1
- # NOTE: this prefers "uhci"; you may prefer "usb-uhci".
- # modprobe -q usb-uhci >/dev/null 2>&1 || modprobe -q uhci >/dev/null 2>&1
- modprobe -q uhci >/dev/null 2>&1 || modprobe -q usb-uhci >/dev/null 2>&1
-
- # ... add any non-PCI HCDS here. Examples include the
- # CRIS usb-host, Philips ISP-1161, Symlogic 811HS, and so on.
- # ohci-hcd can handle some non-pci variants.
-
- if [ -d /proc/bus/usb ]; then
- # If we see there are no busses, we "failed" and
- # can report so even if we're partially nonmodular.
- #
- # NOTE: this fails on older kernels, where usbdevfs had two files
- # ('devices' and 'drivers') with no hcds registered, but works on
- # newer kernels where usbfs has zero files until hcds register,
- # and might not have the 'drivers' file.
- COUNT=`ls /proc/bus/usb | wc -l`
- if [ $COUNT -lt 2 ]; then
- umount /proc/bus/usb
- rmmod usbcore >/dev/null 2>&1
- return 1
- fi
-
- # if USB is fully modular and yet can clean up,
- # we know init failed without needing usbfs
- elif rmmod usbcore >/dev/null 2>&1; then
- return 1
- fi
-
- # hotplug events didn't fire during booting;
- # cope with devices that enumerated earlier
- # and may not have been fully configured.
- if [ $SYNTHESIZE = true ]; then
- sleep 1
- usb_boot_events
- fi
-
- # Some modules are statically loaded, perhaps because they are
- # needed to activate filesystem device nodes.
- for MODULE in $STATIC_MODULE_LIST; do
- modprobe $MODULE
- done
-
- # we did everything we could ...
- return 0
-}
-
-maybe_stop_usb ()
-{
- # call this multiple times if you had to take down components of the
- # USB subsystem by hand; it cleans up whatever can
- # be cleaned up, letting the system quiesce further.
-
- # NOTE: this list of "all USB modules" is unfortunate, but it seems
- # inevitable until modutils supports the notion of drivers with use
- # counts of zero that shouldn't be removed until after their device
- # gets removed. Maybe in 2.5 ... of necessity, the list is partial.
-
- # disconnect all controllers we can, and kernel drivers
- # HCDs first, so most drivers reduce their use counts.
- rmmod ehci-hcd >/dev/null 2>&1
- rmmod ohci-hcd >/dev/null 2>&1
- rmmod uhci-hcd >/dev/null 2>&1
- rmmod usb-ohci >/dev/null 2>&1
- rmmod usb-uhci >/dev/null 2>&1
- rmmod uhci >/dev/null 2>&1
-
- # user mode code may keep usbfs busy for a while yet ...
-
- # OK, usbcore won't actually be removed unless there happen to be
- # no USB drivers loaded, and usbfs isn't mounted. let's force
- # removal of autocleanable modules before trying to rmmod usbcore
- rmmod -as
-# note: module-init-tools 0.8a doesn't handle "-as" flags
-
- # Now let's workaround the fact that some USB modules never increase
- # their module use counts, so that "rmmod -a" won't unload them.
- # (And we can't use "modprobe --autoclean" anyway.)
- rmmod acm >/dev/null 2>&1
- rmmod audio >/dev/null 2>&1
- rmmod auerswald >/dev/null 2>&1
- rmmod belkin_sa >/dev/null 2>&1
- rmmod bluetooth >/dev/null 2>&1
- rmmod catc >/dev/null 2>&1
- rmmod CDCEther >/dev/null 2>&1
- rmmod cpia_usb >/dev/null 2>&1
- rmmod cyberjack >/dev/null 2>&1
- rmmod dabusb >/dev/null 2>&1
- rmmod dc2xx >/dev/null 2>&1
- rmmod digi_acceleport >/dev/null 2>&1
- rmmod dsbr100 >/dev/null 2>&1
- rmmod emi26 >/dev/null 2>&1
- rmmod empeg >/dev/null 2>&1
- rmmod ftdi_sio >/dev/null 2>&1
- rmmod hci_usb >/dev/null 2>&1
- rmmod hid >/dev/null 2>&1
- rmmod hpusbscsi >/dev/null 2>&1
- rmmod ibmcam >/dev/null 2>&1
- rmmod iforce >/dev/null 2>&1
- rmmod io_edgeport >/dev/null 2>&1
- rmmod ipaq >/dev/null 2>&1
- rmmod ir-usb >/dev/null 2>&1
- rmmod irda-usb >/dev/null 2>&1
- rmmod kaweth >/dev/null 2>&1
- rmmod keyspan >/dev/null 2>&1
- rmmod keyspan_pda >/dev/null 2>&1
- rmmod kl5kusb105 >/dev/null 2>&1
- rmmod mct_u232 >/dev/null 2>&1
- rmmod mdc800 >/dev/null 2>&1
- rmmod microtek >/dev/null 2>&1
- rmmod omninet >/dev/null 2>&1
- rmmod ov511 >/dev/null 2>&1
- rmmod pegasus >/dev/null 2>&1
- rmmod pl2303 >/dev/null 2>&1
- rmmod printer >/dev/null 2>&1
- rmmod pwc pwcx >/dev/null 2>&1
- rmmod rio500 >/dev/null 2>&1
- rmmod rtl8150 >/dev/null 2>&1
- rmmod scanner >/dev/null 2>&1
- rmmod se401 >/dev/null 2>&1
- rmmod stv680 >/dev/null 2>&1
- rmmod usbhid >/dev/null 2>&1
- rmmod usbkbd >/dev/null 2>&1
- rmmod usbmouse >/dev/null 2>&1
- rmmod usbnet >/dev/null 2>&1
- rmmod usbtest >/dev/null 2>&1
- rmmod usb-storage >/dev/null 2>&1
- rmmod uss720 >/dev/null 2>&1
- rmmod vicam >/dev/null 2>&1
- rmmod visor >/dev/null 2>&1
- rmmod wacom >/dev/null 2>&1
- rmmod whiteheat >/dev/null 2>&1
-
- if [ "$STATIC_MODULE_LIST" != "" ]; then
- rmmod $STATIC_MODULE_LIST >/dev/null 2>&1
- fi
-
- # remove the helper modules that some usb modules need
- rmmod usbserial >/dev/null 2>&1
- rmmod usbvideo >/dev/null 2>&1
-
- # ok, hope that user mode drivers/managers closed their fds.
- umount /proc/bus/usb >/dev/null 2>&1
-
- rmmod usbcore >/dev/null 2>&1
-
- # we did everything we could ...
- return 0;
-}
-
-# See how we were called.
-case "$1" in
- start)
- maybe_start_usb
- ;;
- stop)
- maybe_stop_usb
- ;;
- status)
- echo $"USB Status for kernel: " `uname -srm`
- echo ''
-
- if [ -f /proc/bus/usb/devices ]; then
- # as noted above: this fails on older kernels,
- # where usbfs created files differently.
- COUNT=`ls /proc/bus/usb | wc -l`
- if [ $COUNT -ge 2 ]; then
- COUNT=`expr $COUNT - 2`
- echo $"USB up; bus count is $COUNT"
- grep "^[TPSI]:" /proc/bus/usb/devices
- else
- echo $"usbfs partially up; no busses"
- fi
- echo ''
-
- echo $"USB Drivers Loaded: "
- if [ -f /proc/bus/usb/drivers ]; then
- cat /proc/bus/usb/drivers
- fi
- if [ -d /sys/bus/usb ]; then
- ls -1 /sys/bus/usb/drivers
- fi
- else
- echo $"usbfs is unavailable. "
- if [ -f /proc/modules ] && grep -F -q usbcore /proc/modules; then
- echo $"USB module is loaded. "
- else
- echo $"USB may be statically linked. "
- fi
- echo $"If khubd is running, that shows USB is available."
- fi
- echo ''
-
- if [ -f /proc/sys/kernel/hotplug ]; then
- echo $"khubd/hotplug thread: "
- else
- echo $"khubd thread:"
- fi
- ps -l | head -n 1
- ps -Al | grep 'khubd' | grep -v grep
- echo ''
-
- lsmod
- echo ''
-
- # /proc/devices too? "usb", "input", and others ...
-
- ;;
- restart)
- # always invoke by absolute path, else PATH=$PATH:
- $0 stop && $0 start
- ;;
- *)
- echo $"Usage: $0 {start|stop|status|restart}"
- exit 1
-esac
+++ /dev/null
-# usb module match_flags idVendor idProduct bcdDevice_lo bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
# This file was automatically created based on description files (*.desc)
-# by sane-desc 3.5 from sane-backends 1.0.22 on Sun Jan 29 13:39:48 2012
+# by sane-desc 3.5 from sane-backends 1.0.23 on Tue Jan 29 10:16:56 2013
#
# The entries below are used to detect a USB device and change owner
# and permissions on the "device node" used by libusb.
libusbscanner 0x0003 0x03f0 0x1705 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Hewlett-Packard ScanJet 7650
libusbscanner 0x0003 0x03f0 0x1805 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Hewlett-Packard ScanJet 4850C
+libusbscanner 0x0003 0x03f0 0x1b05 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Hewlett-Packard ScanJet 3530C | Hewlett-Packard ScanJet 3570C
libusbscanner 0x0003 0x03f0 0x2005 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Hewlett-Packard ScanJet 3500C
libusbscanner 0x0003 0x03f0 0x4505 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Hewlett-Packard ScanJet G4050
libusbscanner 0x0003 0x03f0 0x4605 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Hewlett-Packard ScanJet N6310
+libusbscanner 0x0003 0x03f0 0x4705 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Hewlett-Packard LaserJet M1120 MFP
libusbscanner 0x0003 0x03f0 0x5617 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Hewlett-Packard LaserJet M1120n MFP
libusbscanner 0x0003 0x0400 0x1000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Mustek BearPaw 1200 | Mustek BearPaw 2400
libusbscanner 0x0003 0x0400 0x1001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 5100
+libusbscanner 0x0003 0x040a 0x4025 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 5300
+libusbscanner 0x0003 0x040a 0x4026 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 5500
+libusbscanner 0x0003 0x040a 0x4027 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 5000
+libusbscanner 0x0003 0x040a 0x4028 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 3300
+libusbscanner 0x0003 0x040a 0x4031 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 5
+libusbscanner 0x0003 0x040a 0x4032 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 7
+libusbscanner 0x0003 0x040a 0x403e 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 9
+libusbscanner 0x0003 0x040a 0x403f 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 5200
+libusbscanner 0x0003 0x040a 0x4041 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 3200
+libusbscanner 0x0003 0x040a 0x4043 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 4100
+libusbscanner 0x0003 0x040a 0x4053 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 6100
+libusbscanner 0x0003 0x040a 0x4054 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 7200
+libusbscanner 0x0003 0x040a 0x4056 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP C110
+libusbscanner 0x0003 0x040a 0x4057 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP C115
+libusbscanner 0x0003 0x040a 0x4058 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 2150
+libusbscanner 0x0003 0x040a 0x4059 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP C310
+libusbscanner 0x0003 0x040a 0x405d 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP C315
+libusbscanner 0x0003 0x040a 0x405e 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Advent AW10
+libusbscanner 0x0003 0x040a 0x4060 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak Hero Office 6.1
+libusbscanner 0x0003 0x040a 0x4062 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak Hero 7.1
+libusbscanner 0x0003 0x040a 0x4063 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak Hero 5.1
+libusbscanner 0x0003 0x040a 0x4064 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 9200
+libusbscanner 0x0003 0x040a 0x4065 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak ESP 2170
+libusbscanner 0x0003 0x040a 0x4066 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak Hero 9.1
+libusbscanner 0x0003 0x040a 0x4067 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak Hero 3.1
+libusbscanner 0x0003 0x040a 0x406d 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Kodak i30
libusbscanner 0x0003 0x040a 0x6001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Kodak i40
libusbscanner 0x0003 0x040a 0x6004 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Kodak i80
libusbscanner 0x0003 0x040a 0x6005 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak i1210
+libusbscanner 0x0003 0x040a 0x600a 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak i1220
+libusbscanner 0x0003 0x040a 0x600b 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak i1310
+libusbscanner 0x0003 0x040a 0x600c 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak i1320
+libusbscanner 0x0003 0x040a 0x600d 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak i1410
+libusbscanner 0x0003 0x040a 0x600e 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak i1420
+libusbscanner 0x0003 0x040a 0x600f 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak i1440
+libusbscanner 0x0003 0x040a 0x6010 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak i1000 A4 accessory
+libusbscanner 0x0003 0x040a 0x6011 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak i1000 A3 accessory
+libusbscanner 0x0003 0x040a 0x6012 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak i1405
+libusbscanner 0x0003 0x040a 0x601a 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak i2400
+libusbscanner 0x0003 0x040a 0x601c 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak i2600
+libusbscanner 0x0003 0x040a 0x601d 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Kodak i2800
+libusbscanner 0x0003 0x040a 0x601e 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Creative WebCam Go Mini
libusbscanner 0x0003 0x041e 0x4007 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Lexmark X70 | Lexmark X73
libusbscanner 0x0003 0x0461 0x0364 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Medion/Lifetec/Tevion/Cytron MD5345 | Medion/Lifetec/Tevion/Cytron MD6228 | Medion/Lifetec/Tevion/Cytron MD6471
libusbscanner 0x0003 0x0461 0x0377 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Xerox 2400 Onetouch
+libusbscanner 0x0003 0x0461 0x038b 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Trust Office Scan USB 19200
libusbscanner 0x0003 0x047b 0x1000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Hewlett-Packard ScanJet 4300c/Silitek
libusbscanner 0x0003 0x04a7 0x0474 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Xerox DocuMate272
libusbscanner 0x0003 0x04a7 0x0475 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Xerox DocuMate232
+libusbscanner 0x0003 0x04a7 0x0476 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Xerox DocuMate152
libusbscanner 0x0003 0x04a7 0x0477 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Xerox DocuMate752
libusbscanner 0x0003 0x04a9 0x160b 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon PIXMA MP750
libusbscanner 0x0003 0x04a9 0x1706 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Canon PIXMA MP780
+# Canon PIXMA MP780 | Canon PIXMA MP790
libusbscanner 0x0003 0x04a9 0x1707 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Canon PIXMA MP760
+# Canon PIXMA MP760 | Canon PIXMA MP770
libusbscanner 0x0003 0x04a9 0x1708 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon PIXMA MP150
libusbscanner 0x0003 0x04a9 0x1709 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
libusbscanner 0x0003 0x04a9 0x1742 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon PIXMA MX870
libusbscanner 0x0003 0x04a9 0x1743 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MP280
+libusbscanner 0x0003 0x04a9 0x1746 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MP495
+libusbscanner 0x0003 0x04a9 0x1747 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MG5100 Series
+libusbscanner 0x0003 0x04a9 0x1748 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MG5200 Series
+libusbscanner 0x0003 0x04a9 0x1749 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MG6100 Series
+libusbscanner 0x0003 0x04a9 0x174a 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MG8100 Series
+libusbscanner 0x0003 0x04a9 0x174b 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MX360
+libusbscanner 0x0003 0x04a9 0x174d 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MX410
+libusbscanner 0x0003 0x04a9 0x174e 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MX420
+libusbscanner 0x0003 0x04a9 0x174f 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MX880 Series | Canon PIXMA MX882 | Canon PIXMA MX885
+libusbscanner 0x0003 0x04a9 0x1750 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MG2100 Series
+libusbscanner 0x0003 0x04a9 0x1751 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MG3100 Series
+libusbscanner 0x0003 0x04a9 0x1752 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MG4100 Series
+libusbscanner 0x0003 0x04a9 0x1753 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MG5300 Series
+libusbscanner 0x0003 0x04a9 0x1754 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MG6200 Series
+libusbscanner 0x0003 0x04a9 0x1755 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MG8200 Series
+libusbscanner 0x0003 0x04a9 0x1756 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MP493
+libusbscanner 0x0003 0x04a9 0x1757 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA E500
+libusbscanner 0x0003 0x04a9 0x1758 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MX370 Series
+libusbscanner 0x0003 0x04a9 0x1759 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA E600
+libusbscanner 0x0003 0x04a9 0x175a 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MX430 Series
+libusbscanner 0x0003 0x04a9 0x175b 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MX510 Series
+libusbscanner 0x0003 0x04a9 0x175c 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MX710 Series
+libusbscanner 0x0003 0x04a9 0x175d 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon PIXMA MX890 Series
+libusbscanner 0x0003 0x04a9 0x175e 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon CanoScan 8800F
libusbscanner 0x0003 0x04a9 0x1901 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon CanoScan LiDE 100
libusbscanner 0x0003 0x04a9 0x1904 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon CanoScan LiDE 200
libusbscanner 0x0003 0x04a9 0x1905 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon CanoScan 700F
+libusbscanner 0x0003 0x04a9 0x1907 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon CanoScan 9000F
+libusbscanner 0x0003 0x04a9 0x1908 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon CanoScan LiDE 110
libusbscanner 0x0003 0x04a9 0x1909 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon CanoScan LiDE 210
libusbscanner 0x0003 0x04a9 0x2660 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon imageCLASS MF3240
libusbscanner 0x0003 0x04a9 0x2684 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Canon imageCLASS MF6500 series
+# Canon imageCLASS MF6500 series | Canon imageCLASS MF6550
libusbscanner 0x0003 0x04a9 0x2686 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon imageCLASS MF4120 | Canon imageCLASS MF4122 | Canon imageCLASS MF4140 | Canon imageCLASS MF4150
libusbscanner 0x0003 0x04a9 0x26a3 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Canon imageCLASS MF4690
+# Canon imageCLASS MF4660 | Canon imageCLASS MF4690
libusbscanner 0x0003 0x04a9 0x26b0 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon imageCLASS MF4010 | Canon imageCLASS MF4018
libusbscanner 0x0003 0x04a9 0x26b4 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon imageCLASS MF4270
libusbscanner 0x0003 0x04a9 0x26b5 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon imageRUNNER 1020/1024/1025
+libusbscanner 0x0003 0x04a9 0x26e6 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon imageCLASS MF4370dn | Canon imageCLASS MF4380dn
libusbscanner 0x0003 0x04a9 0x26ec 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon imageCLASS D480
libusbscanner 0x0003 0x04a9 0x26ed 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Canon I-SENSYS MF4320d | Canon I-SENSYS MF4330d | Canon imageCLASS MF4350d
libusbscanner 0x0003 0x04a9 0x26ee 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon imageCLASS MF8030
+libusbscanner 0x0003 0x04a9 0x2707 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Canon imageCLASS MF4410
+libusbscanner 0x0003 0x04a9 0x2737 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Nikon LS 40 ED | Nikon LS 40 ED | Nikon Coolspan IV
libusbscanner 0x0003 0x04b0 0x4000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Nikon LS 50 ED | Nikon Coolscan V ED | Nikon LS 50 ED | Nikon Coolscan V ED
libusbscanner 0x0003 0x04b8 0x013a 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# EPSON GT-F730 | EPSON GT-S630 | EPSON Perfection V33 | EPSON Perfection V330 Photo
libusbscanner 0x0003 0x04b8 0x0142 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON GT-S55
+libusbscanner 0x0003 0x04b8 0x0143 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON GT-S85
+libusbscanner 0x0003 0x04b8 0x0144 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# EPSON CC-600PX | EPSON Stylus CX5100 | EPSON Stylus CX5200 | Epson CX-5200 | Epson CX-5400 | Epson CC-600PX | Epson Stylus CX5100 | Epson Stylus CX5200
libusbscanner 0x0003 0x04b8 0x0801 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# EPSON CC-570L | EPSON Stylus CX3100 | EPSON Stylus CX3200 | Epson CX-3200 | Epson CC-570L | Epson Stylus CX3100 | Epson Stylus CX3200
libusbscanner 0x0003 0x04b8 0x0855 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# EPSON PX-502A | EPSON Stylus NX510 Series | EPSON Stylus SX510W Series | EPSON Stylus TX550W Series | Epson PX-502A | Epson Stylus NX510 Series | Epson Stylus SX510W Series | Epson Stylus TX550W Series
libusbscanner 0x0003 0x04b8 0x0856 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# EPSON ME 320 Series | EPSON ME 330 Series | EPSON Stylus NX125 | EPSON Stylus NX127 | EPSON Stylus SX125 | EPSON Stylus TX120 Series
+# EPSON ME 320 Series | EPSON ME 330 Series | EPSON Stylus NX125 | EPSON Stylus NX127 | EPSON Stylus SX125 | EPSON Stylus TX120 Series | Epson Stylus SX125
libusbscanner 0x0003 0x04b8 0x085c 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# EPSON ME OFFICE 960FWD Series | EPSON Stylus Office BX625FWD | EPSON Stylus Office TX620FWD Series | EPSON Stylus SX620FW Series | EPSON WorkForce 630 Series
+# EPSON ME OFFICE 960FWD Series | EPSON PX-603F | EPSON Stylus Office BX625FWD | EPSON Stylus Office TX620FWD Series | EPSON Stylus SX620FW Series | EPSON WorkForce 630 Series
libusbscanner 0x0003 0x04b8 0x085d 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# EPSON ME OFFICE 900WD Series | EPSON PX-503A | EPSON Stylus Office BX525WD | EPSON Stylus NX625 | EPSON Stylus SX525WD | EPSON Stylus TX560WD Series | EPSON WorkForce 625
libusbscanner 0x0003 0x04b8 0x085e 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# EPSON Stylus Office BX320FW Series | EPSON Stylus Office TX525FW | EPSON WorkForce 520 Series
libusbscanner 0x0003 0x04b8 0x085f 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# EPSON Artisan 835 | EPSON EP-903A | EPSON EP-903F | EPSON Stylus Photo PX820FWD Series
+# EPSON Artisan 835 | EPSON EP-903A | EPSON EP-903F | EPSON Stylus Photo PX820FWD Series | EPSON Stylus Photo TX820FWD Series
libusbscanner 0x0003 0x04b8 0x0860 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# EPSON Artisan 725 | EPSON EP-803A | EPSON EP-803AW | EPSON Stylus Photo PX720WD Series
+# EPSON Artisan 725 | EPSON EP-803A | EPSON EP-803AW | EPSON Stylus Photo PX720WD Series | EPSON Stylus Photo TX720WD Series
libusbscanner 0x0003 0x04b8 0x0861 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# EPSON EP-703A | EPSON Stylus Photo PX660 Series
libusbscanner 0x0003 0x04b8 0x0862 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
libusbscanner 0x0003 0x04b8 0x0864 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# EPSON ME OFFICE 520 Series | EPSON Stylus NX220 Series | EPSON Stylus SX218 | EPSON Stylus TX220 Series
libusbscanner 0x0003 0x04b8 0x0865 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# EPSON AcuLaser MX20DN | EPSON AcuLaser MX20DNF
+# EPSON AcuLaser MX20DN | EPSON AcuLaser MX20DNF | EPSON AcuLaser MX21DNF
libusbscanner 0x0003 0x04b8 0x0866 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON PX-1600F
+libusbscanner 0x0003 0x04b8 0x0869 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON PX-673F | EPSON Stylus Office BX925FWD | EPSON WorkForce 840 Series
+libusbscanner 0x0003 0x04b8 0x086a 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON Stylus Office BX305FW Plus | EPSON WorkForce 435
+libusbscanner 0x0003 0x04b8 0x0870 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON K200 Series
+libusbscanner 0x0003 0x04b8 0x0871 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON K300 Series | EPSON WorkForce K301
+libusbscanner 0x0003 0x04b8 0x0872 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON L200 Series
+libusbscanner 0x0003 0x04b8 0x0873 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON EP-704A
+libusbscanner 0x0003 0x04b8 0x0878 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON Artisan 837 | EPSON EP-904A | EPSON EP-904F | EPSON Stylus Photo PX830FWD Series
+libusbscanner 0x0003 0x04b8 0x0879 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON Artisan 730 Series | EPSON EP-804A | EPSON EP-804AR | EPSON EP-804AW | EPSON Stylus Photo PX730WD Series
+libusbscanner 0x0003 0x04b8 0x087b 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON PX-1700F
+libusbscanner 0x0003 0x04b8 0x087c 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON PX-B750F | EPSON WP-4511 | EPSON WP-4515 | EPSON WP-4521 | EPSON WP-4525 | EPSON WP-4530 | EPSON WP-4535 | EPSON WP-4540 | EPSON WP-4545
+libusbscanner 0x0003 0x04b8 0x087d 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON PX-403A
+libusbscanner 0x0003 0x04b8 0x087f 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON PX-434A | EPSON Stylus NX330 Series | EPSON Stylus SX430W Series | EPSON Stylus TX430W Series
+libusbscanner 0x0003 0x04b8 0x0880 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON ME OFFICE 535 | EPSON PX-404A | EPSON Stylus TX235
+libusbscanner 0x0003 0x04b8 0x0881 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON ME 340 Series | EPSON Stylus NX130 Series | EPSON Stylus SX130 Series | EPSON Stylus TX130 Series
+libusbscanner 0x0003 0x04b8 0x0883 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON Stylus NX430W Series | EPSON Stylus SX440W Series | EPSON Stylus TX435W
+libusbscanner 0x0003 0x04b8 0x0884 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON Stylus NX230 Series | EPSON Stylus SX235W | EPSON Stylus TX230W Series
+libusbscanner 0x0003 0x04b8 0x0885 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON Stylus Office BX635FWD | EPSON WorkForce 645
+libusbscanner 0x0003 0x04b8 0x088f 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON ME OFFICE 940FW Series | EPSON Stylus Office BX630FW Series | EPSON WorkForce 545
+libusbscanner 0x0003 0x04b8 0x0890 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON Stylus Office BX535WD | EPSON Stylus NX635 | EPSON Stylus SX535WD
+libusbscanner 0x0003 0x04b8 0x0891 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON Stylus Office BX935FWD | EPSON WorkForce 845
+libusbscanner 0x0003 0x04b8 0x0892 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# EPSON EP-774A
+libusbscanner 0x0003 0x04b8 0x0893 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Fujitsu fi-4010CU
libusbscanner 0x0003 0x04c5 0x1029 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Fujitsu fi-4120C
libusbscanner 0x0003 0x04c5 0x119d 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Fujitsu fi-6800-CGA
libusbscanner 0x0003 0x04c5 0x119e 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Fujitsu fi-6900
-libusbscanner 0x0003 0x04c5 0x119f 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Fujitsu fi-6900-CGA
-libusbscanner 0x0003 0x04c5 0x11a0 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Fujitsu ScanSnap S1500 | Fujitsu ScanSnap S1500M
libusbscanner 0x0003 0x04c5 0x11a2 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Fujitsu ScanSnap S1300
libusbscanner 0x0003 0x04c5 0x11ed 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Fujitsu fi-6125
-libusbscanner 0x0003 0x04c5 0x11ee 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Fujitsu fi-6225
-libusbscanner 0x0003 0x04c5 0x11ef 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Fujitsu fi-6145
+# Fujitsu fi-6140Z
libusbscanner 0x0003 0x04c5 0x11f1 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Fujitsu fi-6245
+# Fujitsu fi-6240Z
libusbscanner 0x0003 0x04c5 0x11f2 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Fujitsu fi-6135
+# Fujitsu fi-6130Z
libusbscanner 0x0003 0x04c5 0x11f3 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Fujitsu fi-6235
+# Fujitsu fi-6230Z
libusbscanner 0x0003 0x04c5 0x11f4 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Fujitsu fi-6110
libusbscanner 0x0003 0x04c5 0x11fc 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Fujitsu fi-5950C
+libusbscanner 0x0003 0x04c5 0x1213 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Konica e-mini
libusbscanner 0x0003 0x04c8 0x0722 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Panasonic KV-S2026C
libusbscanner 0x0003 0x04da 0x1009 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Panasonic KV-S2028C
libusbscanner 0x0003 0x04da 0x100a 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Panasonic KV-S4085C
+libusbscanner 0x0003 0x04da 0x100c 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Panasonic KV-S4065C
+libusbscanner 0x0003 0x04da 0x100d 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Panasonic KV-S7075C
+libusbscanner 0x0003 0x04da 0x100e 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Panasonic KV-SS080
libusbscanner 0x0003 0x04da 0x100f 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Panasonic KV-S1045C
libusbscanner 0x0003 0x04e8 0x341b 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Samsung SCX4725-FN
libusbscanner 0x0003 0x04e8 0x341f 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Samsung CLX-2160
+libusbscanner 0x0003 0x04e8 0x3425 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Samsung SCX-4500
libusbscanner 0x0003 0x04e8 0x3426 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Samsung CLX-3170fn | Samsung CLX-3175FW
libusbscanner 0x0003 0x04e8 0x342b 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Samsung SCX-4824
libusbscanner 0x0003 0x04e8 0x342c 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Samsung SCX-4828FN (4x28 Series)
+libusbscanner 0x0003 0x04e8 0x342d 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Samsung SCX-4300
libusbscanner 0x0003 0x04e8 0x342e 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Samsung SCX-4600
libusbscanner 0x0003 0x04e8 0x3434 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Samsung SCX-4825FN
libusbscanner 0x0003 0x04e8 0x343c 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Samsung CLX-3185
+libusbscanner 0x0003 0x04e8 0x343d 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Samsung SCX-4623FW
+libusbscanner 0x0003 0x04e8 0x3440 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Samsung SCX-3205W
+libusbscanner 0x0003 0x04e8 0x3441 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Brother MFC-3100C
libusbscanner 0x0003 0x04f9 0x010e 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Brother MFC-5100C
libusbscanner 0x0003 0x0638 0x0a15 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Avision DS610CU Scancopier | Minolta-QMS SC-215 | OKI S700 Scancopier
libusbscanner 0x0003 0x0638 0x0a16 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Avision AV600U Plus
+# Avision AV610 | Avision AV600U Plus
libusbscanner 0x0003 0x0638 0x0a18 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
-# Avision AV610
-libusbscanner 0x0003 0x0638 0x0a19 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Avision AV220
libusbscanner 0x0003 0x0638 0x0a23 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Avision AV210
#!/sbin/runscript
# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-wireless/bluez/files/bluetooth-init.d-r1,v 1.1 2012/01/09 23:01:55 pacho Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-wireless/bluez/files/bluetooth-init.d-r2,v 1.1 2012/07/06 18:41:14 pacho Exp $
depend() {
after coldplug
}
start() {
- ebegin "Udev coldplug of bluetooth devices"
- udevadm trigger --subsystem-match=bluetooth --action=add
+ ebegin "Starting ${SVCNAME}"
+ start-stop-daemon --start --exec /usr/sbin/bluetoothd
eend $?
}
stop() {
- return 0
+ ebegin "Shutting down ${SVCNAME}"
+ start-stop-daemon --stop --quiet --exec /usr/sbin/bluetoothd
+ eend $?
}
#!/sbin/runscript
-# Copyright 1999-2008 Gentoo Foundation
+# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/device-mapper.rc-2.02.67-r1,v 1.1 2010/06/09 22:41:45 robbat2 Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/device-mapper.rc-2.02.95-r2,v 1.1 2012/05/27 07:05:22 robbat2 Exp $
depend() {
- # necessary for services when using baselayout-2
- # but conflict for baselayout-1
- if [ -e /etc/init.d/root ] ; then
- before checkfs fsck
- after modules
- fi
# As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that
# means dmeventd is NOT notified, as it cannot be safely running
- before dmeventd
+ before dmeventd checkfs fsck
+ after modules
+}
+
+dm_in_proc() {
+ local retval=0
+ for x in devices misc ; do
+ grep -qs 'device-mapper' /proc/${x}
+ retval=$((${retval} + $?))
+ done
+ return ${retval}
}
+# char **get_new_dm_volumes(void)
+#
+# Return dmsetup commands to setup volumes
+get_new_dm_volumes() {
+ local volume params
+
+ # Filter comments and blank lines
+ grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \
+ while read volume params ; do
+ # If it exists, skip it
+ dmvolume_exists "${volume%:}" && continue
+ # Assemble the command to run to create volume
+ echo "echo ${params} | /sbin/dmsetup create ${volume%:}"
+ done
+
+ return 0
+}
+
+# int dmvolume_exists(volume)
+#
+# Return true if volume exists in DM table
+dmvolume_exists() {
+ local x line volume=$1
+
+ [ -z "${volume}" ] && return 1
+
+ /sbin/dmsetup ls 2>/dev/null | \
+ while read line ; do
+ for x in ${line} ; do
+ # the following conditonal return only breaks out
+ # of the while loop, as it is running in a pipe.
+ [ "${x}" = "${volume}" ] && return 1
+ # We only want to check the volume name
+ break
+ done
+ done
+
+ # if 1 was returned from the above loop, then indicate that
+ # volume exists
+ [ $? = 1 ] && return 0
+
+ # otherwise the loop exited normally and the volume does not
+ # exist
+ return 1
+}
+
+# int is_empty_dm_volume(volume)
+#
+# Return true if the volume exists in DM table, but is empty/non-valid
+is_empty_dm_volume() {
+ local table volume=$1
+
+ set -- $(/sbin/dmsetup table 2>/dev/null | grep -e "^${volume}:")
+ [ "${volume}" = "$1" -a -z "$2" ]
+}
+
+
start() {
- if [ ! -e /etc/init.d/root ] ; then
- eerror "The ${SVCNAME} init script is written for baselayout-2"
- eerror "Please do not use it with baselayout-1"
- return 1
+ if [ -e /proc/modules ] && ! dm_in_proc ; then
+ modprobe dm-mod 2>/dev/null
fi
+ # Ensure the dirs exist for locking and running
+ checkpath -q -d -m 0700 -o root:root /run/lvm /run/lock/lvm
- local f=/lib64/rcscripts/addons/dm-start.sh
- if [ -r "$f" ]; then
- ( . "$f" )
+ local x volume
+
+ if [ -x /sbin/dmsetup -a -c /dev/mapper/control -a -f /etc/dmtab ] ; then
+ [ -n "$(get_new_dm_volumes)" ] && \
+ einfo " Setting up device-mapper volumes:"
+
+ get_new_dm_volumes | \
+ while read x ; do
+ [ -n "${x}" ] || continue
+
+ volume="${x##* }"
+
+ ebegin " Creating volume: ${volume}"
+ if ! eval "${x}" >/dev/null 2>/dev/null ; then
+ eend 1 " Error creating volume: ${volume}"
+ # dmsetup still adds an empty volume in some cases,
+ # so lets remove it
+ is_empty_dm_volume "${volume}" && \
+ /sbin/dmsetup remove "${volume}" 2>/dev/null
+ else
+ eend 0
+ fi
+ done
fi
}
+++ /dev/null
-#!/sbin/runscript
-# Copyright 1999-2004 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/hotplug/files/hotplug.rc.empty,v 1.3 2005/01/27 18:29:26 wolf31o2 Exp $
-
-#
-# nothing here anymore. Please use the coldplug package if you really want to
-# load modules for devices that are discovered by your kernel before init runs.
-#
-# However, please realize that if you have any problems, the developers
-# recommend just using the modules.autoload functionality to handle this in a
-# much simpler manner.
-#
-# Comments, flames, and fine beer should be directed at gregkh@gentoo.org
-#
-
-depend() {
- need modules
-}
-
-start () {
- # just verify that people build their kernel with hotplug support.
- if [ ! -f /proc/sys/kernel/hotplug ] ; then
- eerror "CONFIG_HOTPLUG not enabled for this kernel!"
- return 1
- fi
- # This unpacks any firmware tarballs. Used for LiveCD.
- if [ -e /lib/firmware.tar.bz2 ]
- then
- ebegin "Unpacking hotplug firmware"
- tar xjf /lib/firmware.tar.bz2 -C /lib/firmware
- eend 0
- fi
-}
#!/sbin/runscript
-# Copyright 1999-2007 Gentoo Foundation
+# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvm.rc-2.02.67-r1,v 1.1 2010/06/09 22:41:45 robbat2 Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvm.rc-2.02.95-r2,v 1.1 2012/05/27 07:05:22 robbat2 Exp $
depend() {
- if [ -f /etc/init.d/sysfs ]; then
- # on baselayout-1 this causes
- # dependency-cycles with checkroot (before *)
- before checkfs fsck
- after modules device-mapper
- fi
- # As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that
- # means dmeventd is NOT notified, as it cannot be safely running
- before dmeventd
+ use dmeventd
+ before checkfs fsck
+ after dmeventd modules device-mapper
}
-run_addon() {
- local f=/lib64/rcscripts/addons/$1.sh
- if [ -r "$f" ]; then
- ( . "$f" )
- fi
+config='global { locking_dir = "/run/lock/lvm" }'
+
+dm_in_proc() {
+ local retval=0
+ for x in devices misc ; do
+ grep -qs 'device-mapper' /proc/${x}
+ retval=$((${retval} + $?))
+ done
+ return ${retval}
}
start() {
- if [ ! -f /etc/init.d/sysfs ]; then
- eerror "The $SVCNAME init-script is written for baselayout-2!"
- eerror "Please do not use it with baselayout-1!".
+ # LVM support for /usr, /home, /opt ....
+ # This should be done *before* checking local
+ # volumes, or they never get checked.
+
+ # NOTE: Add needed modules for LVM or RAID, etc
+ # to /etc/modules.autoload if needed
+ for lvm_path in /bin/lvm /sbin/lvm ; do
+ [ -x "$lvm_path" ] && break
+ done
+ if [ ! -x "$lvm_path" ]; then
+ eerror "Cannot find lvm binary in /sbin or /bin!"
return 1
fi
-
- run_addon lvm-start
+ if [ -z "${CDBOOT}" ] ; then
+ if [ -e /proc/modules ] && ! dm_in_proc ; then
+ modprobe dm-mod 2>/dev/null
+ fi
+ if [ -d /proc/lvm ] || dm_in_proc ; then
+ ebegin "Setting up the Logical Volume Manager"
+ #still echo stderr for debugging
+ lvm_commands="#! ${lvm_path} --config '${config}'\n"
+ # Extra PV find pass because some devices might not have been available until very recently
+ lvm_commands="${lvm_commands}pvscan\n"
+ # Now make the nodes
+ lvm_commands="${lvm_commands}vgscan --mknodes\n"
+ # And turn them on!
+ lvm_commands="${lvm_commands}vgchange --sysinit -a ly\n"
+ # Order of this is important, have to work around dash and LVM readline
+ printf "%b\n" "${lvm_commands}" | $lvm_path /proc/self/fd/0 --config "${config}" >/dev/null
+ eend $? "Failed to setup the LVM"
+ fi
+ fi
}
stop() {
- run_addon lvm-stop
+ for lvm_path in /bin/lvm /sbin/lvm ; do
+ [ -x "$lvm_path" ] && break
+ done
+ if [ ! -x "$lvm_path" ]; then
+ eerror "Cannot find lvm binary in /sbin or /bin!"
+ return 1
+ fi
+# Stop LVM2
+if [ -x /sbin/vgs ] && \
+ [ -x /sbin/vgchange ] && \
+ [ -x /sbin/lvchange ] && \
+ [ -f /etc/lvmtab -o -d /etc/lvm ] && \
+ [ -d /proc/lvm -o "`grep device-mapper /proc/misc 2>/dev/null`" ]
+then
+ einfo "Shutting down the Logical Volume Manager"
+
+
+ VGS=$($lvm_path vgs --config "${config}" -o vg_name --noheadings --nosuffix 2> /dev/null)
+
+ if [ "$VGS" ]
+ then
+ ebegin " Shutting Down LVs & VGs"
+ #still echo stderr for debugging
+ lvm_commands="#! ${lvm_path} --config '${config}'\n"
+ # Extra PV find pass because some devices might not have been available until very recently
+ lvm_commands="${lvm_commands}lvchange --sysinit -a ln ${VGS}\n"
+ # Now make the nodes
+ lvm_commands="${lvm_commands}vgchange --sysinit -a ln\n"
+ # Order of this is important, have to work around dash and LVM readline
+ printf "%b\n" "${lvm_commands}" | $lvm_path /proc/self/fd/0 --config "${config}" >/dev/null
+ eend $? "Failed"
+ fi
+
+ einfo "Finished Shutting down the Logical Volume Manager"
+fi
}
# vim:ts=4
#!/sbin/runscript
-# Copyright 1999-2010 Gentoo Foundation
+# Copyright 1999-2013 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-command=/sbin/udevd
command_args="--daemon ${udev_opts}"
-description="Run udevd and create the device-nodes"
+description="udev manages device permissions and symbolic links in /dev"
+extra_started_commands="reload"
+description_reload="Reload the udev rules and databases"
-persistent_cd_disable="${persistent_cd_disable:-no}"
-persistent_net_disable="${persistent_net_disable:-no}"
rc_coldplug=${rc_coldplug:-${RC_COLDPLUG:-YES}}
udev_debug="${udev_debug:-no}"
udev_monitor="${udev_monitor:-no}"
udev_monitor_keep_running="${udev_monitor_keep_running:-no}"
udev_settle_timeout="${udev_settle_timeout:-60}"
-kv_min="${kb_min:-2.6.32}"
+kv_min="${kv_min:-2.6.34}"
depend()
{
+ # we depend on udev-mount explicitly, not dev-mount generic as we don't
+ # want mdev as a dev-mount provider to come in.
provide dev
need sysfs udev-mount
before checkfs fsck
return 0
}
-get_rundir()
+start_pre()
{
- echo $(udevadm info --run)
-}
+ check_kernel || return 1
+ if [ -e /proc/sys/kernel/hotplug ]; then
+ echo "" >/proc/sys/kernel/hotplug
+ fi
-cleanup()
-{
- # fail more gracely and not leave udevd running
- start-stop-daemon --stop --exec /sbin/udevd
- exit 1
-}
+ # load unix domain sockets if built as module, Bug #221253
+ # and not yet loaded, Bug #363549
+ if [ ! -e /proc/net/unix ]; then
+ if ! modprobe unix; then
+ eerror "Cannot load the unix domain socket module"
+ return 1
+ fi
+ fi
-rules_disable_switch()
-{
- # this function disables rules files
- # by creating new files with the same name
- # in a temp rules directory with higher priority
- local f=$(get_rundir)/rules.d/"$1" bname="$1" onoff="$2"
+ if yesno "${udev_debug}"; then
+ command_args="${command_args} --debug 2> /run/udevdebug.log"
+ fi
- if yesno "${onoff}"; then
- echo "# This file disables ${bname} due to /etc/conf.d/udev" \
- > "${f}"
- else
- rm -f "${f}"
+ bins="/sbin/udevd /lib/systemd/systemd-udevd /usr/lib/systemd/systemd-udevd"
+ for f in ${bins}; do
+ if [ -x "$f" ] && ! [ -L "$f" ]; then
+ command="$f"
+ fi
+ done
+ if [ -z "$command" ]; then
+ eerror "Unable to find udev executable."
+ return 1
fi
+ return 0
}
is_service_enabled()
return 1
}
-start_pre()
+disable_oldnet_hotplug()
{
- if [ -d /run ]; then
- checkpath -d -m 0755 -o root:root -q /run/udev
- fi
-
if is_service_enabled network; then
# disable network hotplugging
- local f="$(get_rundir)/rules.d/90-network.rules"
+ local f="/run/udev/rules.d/90-network.rules"
echo "# This file disables network hotplug events calling" >> "${f}"
echo "# old-style openrc net scripts" >> "${f}"
echo "# as we use /etc/init.d/network to set up our network" >> "${f}"
fi
-
- if [ ! -e /etc/runlevels/${RC_DEFAULTLEVEL:-default}/udev-postmount ]; then
- ewarn "You should add udev-postmount service to your default runlevel."
- fi
-
- /lib/udev/write_root_link_rule
-
- rules_disable_switch 75-persistent-net-generator.rules "${persistent_net_disable}"
- rules_disable_switch 75-cd-aliases-generator.rules ${persistent_cd_disable}
-
- if [ -e /proc/sys/kernel/hotplug ]; then
- echo "" >/proc/sys/kernel/hotplug
- fi
-
- # load unix domain sockets if built as module, Bug #221253
- # and not yet loaded, Bug #363549
- if [ ! -e /proc/net/unix ]; then
- if ! modprobe unix; then
- eerror "Cannot load the unix domain socket module"
- fi
- fi
-
- if yesno "${udev_debug}"; then
- command_args="${command_args} --debug 2> $(get_rundir)/udev.log"
- fi
}
start_udevmonitor()
{
yesno "${udev_monitor}" || return 0
- udevmonitor_log="$(get_rundir)/udevmonitor.log"
- udevmonitor_pid="$(get_rundir)/udevmonitor.pid"
+ udevmonitor_log=/run/udevmonitor.log
+ udevmonitor_pid=/run/udevmonitor.pid
einfo "udev: Running udevadm monitor ${udev_monitor_opts} to log all events"
start-stop-daemon --start --stdout "${udevmonitor_log}" \
udevadm trigger --type=subsystems --action=add
udevadm trigger --type=devices --action=add
eend $?
-
- # we can speed up booting under these conditions:
- # * using devtmpfs so kernel creates device nodes for us
- # * only using kernel created device nodes at boot
- # (in /etc/fstab and elsewhere)
- #
ebegin "Waiting for uevents to be processed"
udevadm settle --timeout=${udev_settle_timeout}
eend $?
-
udevadm control --property=do_not_run_plug_service=
return 0
}
-check_persistent_net()
-{
- # check if there are problems with persistent-net
- local syspath= devs= problem=false
- for syspath in /sys/class/net/*_rename*; do
- if [ -d "${syspath}" ]; then
- devs="${devs} ${syspath##*/}"
- problem=true
- fi
- done
-
- ${problem} || return 0
-
- eerror "UDEV: Your system has a problem assigning persistent names"
- eerror "to these network interfaces: ${devs}"
-
- einfo "Checking persistent-net rules:"
- # the sed-expression lists all duplicate lines
- # from the input, like "uniq -d" does, but uniq
- # is installed into /usr/bin and not available at boot.
- dups=$(
- RULES_FILE='/etc/udev/rules.d/70-persistent-net.rules'
- . /lib/udev/rule_generator.functions
- find_all_rules 'NAME=' '.*' | \
- tr ' ' '\n' | \
- sort | \
- sed '$!N; s/^\(.*\)\n\1$/\1/; t; D'
- )
- if [ -n "${dups}" ]; then
- ewarn "The rules create multiple entries assigning these names:"
- eindent
- ewarn "${dups}"
- eoutdent
- else
- ewarn "Found no duplicate names in persistent-net rules,"
- ewarn "there must be some other problem!"
- fi
- return 1
-}
-
-check_udev_works()
-{
- # should exist on every system, else udev failed
- if [ ! -e /dev/zero ]; then
- eerror "Assuming udev failed somewhere, as /dev/zero does not exist."
- return 1
- fi
- return 0
-}
-
stop_udevmonitor()
{
yesno "${udev_monitor}" || return 0
start_post()
{
+ disable_oldnet_hotplug
start_udevmonitor
populate_dev
- check_persistent_net
- check_udev_works || cleanup
stop_udevmonitor
display_hotplugged_services
return 0
}
+
+stop()
+{
+ ebegin "Stopping ${name:-$RC_SVCNAME}"
+ udevadm control --exit
+ eend $? "Failed to stop $RC_SVCNAME"
+}
+
+reload()
+{
+ ebegin "reloading udev rules and databases"
+ udevadm control --reload
+ eend $?
+}
#!/sbin/runscript
-# Copyright 1999-2010 Gentoo Foundation
+# Copyright 1999-2013 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-description="mount devtmpfs or tmpfs on /dev"
+description="mount devtmpfs on /dev"
depend()
{
mount_dev_directory()
{
- if mountinfo -q /dev; then
- einfo "/dev is already mounted"
- return 0
+ local mounted=false fstab=false action=--mount msg=Mounting rc=0
+
+ if ! grep -qs devtmpfs /proc/filesystems; then
+ eerror "CONFIG_DEVTMPFS=y is required in your kernel configuration"
+ eerror "for this version of udev to run successfully."
+ eerror "This requires immediate attention."
+ if ! mountinfo -q /dev; then
+ mount -n -t tmpfs dev /dev
+ busybox mdev -s
+ mkdir /dev/pts
+ fi
+ return 1
fi
- # No options are processed here as they should all be in /etc/fstab
- ebegin "Mounting /dev"
- if ! fstabinfo --mount /dev; then
- # we mount devtmpfs if supported
- local fs=tmpfs
- grep -qs devtmpfs /proc/filesystems && fs=devtmpfs
+ # Is /dev already a mounted devtmpfs?
+ mountinfo -q -f devtmpfs /dev && mounted=true
+
+ # If an entry for /dev exists in fstab it must be a devtmpfs.
+ fstabinfo -q -t devtmpfs /dev && fstab=true
+ # No options are processed here as they should all be in /etc/fstab
+ if $fstab; then
+ $mounted && action=--remount && msg=Remounting
+ ebegin "$msg /dev according to /etc/fstab"
+ fstabinfo $action /dev
+ rc=$?
+ elif ! $mounted; then
+ ebegin "Mounting /dev"
# Some devices require exec, Bug #92921
- mount -n -t "$fs" -o "exec,nosuid,mode=0755,size=10M" udev /dev
+ mount -n -t devtmpfs -o "exec,nosuid,mode=0755,size=10M" udev /dev
+ rc=$?
+ else
+ ebegin "Using /dev mounted from kernel"
fi
- eend $?
+
+ eend $rc
}
seed_dev()
# udevd will dup its stdin/stdout/stderr to /dev/null
# and we do not want a file which gets buffered in ram
[ -c /dev/null ] || mknod -m 666 /dev/null c 1 3
- ${HAVE_SELINUX} && restorecon /dev/null
# so udev can add its start-message to dmesg
[ -c /dev/kmsg ] || mknod -m 660 /dev/kmsg c 1 11
# Create problematic directories
mkdir -p /dev/pts /dev/shm
- ${HAVE_SELINUX} && restorecon -R /dev >/dev/null
return 0
}
{
mount_dev_directory || return 1
- # Selinux lovin; /selinux should be mounted by selinux-patched init
- if [ -x /sbin/restorecon -a -c /selinux/null ]; then
- HAVE_SELINUX=true
- restorecon /dev > /selinux/null
- else
- HAVE_SELINUX=false
- fi
-
seed_dev
return 0
}
+++ /dev/null
-#!/sbin/runscript
-# Copyright 1999-2010 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-udev_version()
-{
- echo $(udevadm --version)
-}
-
-depend()
-{
- need localmount
- if [ $(udev_version) -lt 175 ]; then
- after dbus # for trigger failed
- fi
- keyword -vserver -lxc
-}
-
-dir_writeable()
-{
- touch "$1"/.test.$$ 2>/dev/null && rm "$1"/.test.$$
-}
-
-# store persistent-rules that got created while booting
-# when / was still read-only
-store_persistent_rules()
-{
- # only continue if rules-directory is writable
- dir_writeable /etc/udev/rules.d || return 0
-
- local file dest
- for file in "${RUNDIR}"/tmp-rules--*; do
- dest=${file##*tmp-rules--}
- [ "$dest" = '*' ] && break
- type=${dest##70-persistent-}
- type=${type%%.rules}
- ebegin "Saving udev persistent ${type} rules to /etc/udev/rules.d"
- cat "$file" >> /etc/udev/rules.d/"$dest" && rm -f "$file"
- eend $? "Failed moving persistent rules!"
- done
-}
-
-start()
-{
- RUNDIR=$(udevadm info --run)
- # check if this system uses udev
- [ -d "${RUNDIR}" ] || return 0
-
- einfo "Doing udev cleanups"
-
- if [ $(udev_version) -lt 175 ]; then
- # Run the events that failed at first udev trigger
- udevadm trigger --type=failed -v
- fi
-
- # store persistent-rules that got created while booting
- # when / was still read-only
- store_persistent_rules
-}
-
-stop()
-{
- return 0
-}
-
-# vim:ts=4
[MAIN]
-
#-----------------------------------------------------------
# Defines the directory where overlays should be installed
#-----------------------------------------------------------
# The list of locally installed overlays
-local_list: %(storage)s/overlays.xml
+installed: %(storage)s/installed.xml
+
+# This has been renamed from the following
+# old name : value use it for updating to new one above
+# local_list: %(storage)s/overlays.xml
+# either rename the overlays.xml file to installed.xml
+# or edit the value above to the current name of your
+# installed overlay(s) file.
#-----------------------------------------------------------
-# Path to the make.conf file that should be modified by
+# Path to the make.conf file that should be modified by
# layman
make_conf : %(storage)s/make.conf
#-----------------------------------------------------------
-# URLs of the remote lists of overlays (one per line) or
+# URLs of the remote lists of overlays (one per line) or
# local overlay definitions
#
#overlays : http://www.gentoo.org/proj/en/overlays/repositories.xml
overlays : http://www.gentoo.org/proj/en/overlays/repositories.xml
+#-----------------------------------------------------------
+# The directory to scan for xml overlay definition files to include
+# in the list of available overlays. They are automatically added to the
+# "overlays" parameter above. Use either method, but do not add the same
+# definition in both.
+#
+
+#overlay_defs : /etc/layman/overlays
+
#-----------------------------------------------------------
# Proxy support
# If unset, layman will use the http_proxy environment variable.
# Hopefully this description eases the double negation trouble:
#
# nocheck : yes
-# - Accepts completene overlay entries without warnings
+# - Accepts complete overlay entries without warnings
# - Lists overlays of type foo (say Git) even with no foo installed
#
# nocheck : no
#
#umask : 0022
+#-----------------------------------------------------------
+# News reporting settings
+#
+# This is for when layman is adding/syncing overlays.
+# It is required for GLEP 42.
+# Currently there are 3 possible values:
+# portage, pkgcore, custom
+#
+# portage: uses portage to report news only from overlay(s) in
+# versions >=2.2.0_alpha72 or >=2.1.10.32
+# or all repositories (including gentoo) for older portage versions.
+# pkgcore: does not yet support glep 42, no news is reported
+# custom: requires that you provide a suitable python function
+# to 'custom_news_func' using the api's config.set_option()
+# or define the python package to import it from in custom_news_pkg
+
+news_reporter: portage
+
+#-----------------------------------------------------------
+# News reporting custom function setting
+#
+# the pkg name that contains the layman_news_function()
+# for it to import and use. It must be found in PYTHONPATH
+
+#custom_news_pkg :
+
#-----------------------------------------------------------
# Command overrides
#
#rsync_command : /usr/bin/rsync
#svn_command : /usr/bin/svn
#tar_command : /bin/tar
+#g-common_command : /usr/bin/g-common
+
+
+#-----------------------------------------------------------
+# Command additional options
+#
+# These commnad options will be added to the above commands
+# when the overlay is added or synced.
+#
+# note: there are some options hardcoded in the backend
+# scripts already. All VCS types listed here are
+# for general consistency. Options may not be available
+# or recommended for all VCS types and/or add/sync operations.
+# Any options defined here are deemed:
+# "Use at your own risk"
+# and are not supported.
+#
+# eg:
+# svn_addopts : --config-option=config:miscellany:use-commit-times=yes
+#
+
+#bzr_addopts :
+#bzr_syncopts :
+#cvs_addopts :
+#cvs_syncopts :
+#darcs_addopts :
+#darcs_syncopts :
+#git_addopts :
+#git_syncopts :
+#mercurial_addopts :
+#mercurial_syncopts :
+#rsync_syncopts :
+#svn_addopts :
+#svn_syncopts :
+#g-common_generateopts :
+#g-common_syncopts :
+
+
+#-----------------------------------------------------------
+# Per VCS Post Sync/Add hooks
+#
+# The listed commands will be run after every add/sync operation.
+# All on one line If the repo path is needed, use a %cwd= in
+# where you want the path substituted in. It will be detected
+# and replaced with the correct path.
+#
+# eg: git_postsync : git-set-file-times
+# eg: git_postsync : git-set-file-times %cwd=
+# eg: git_postsync : git-set-file-times path=%cwd=
+#
+#bzr_postsync :
+#cvs_postsync :
+#darcs_postsync :
+#git_postsync :
+#mercurial_postsync :
+#rsync_postsync :
+#svn_postsync :
+#tar_postsync :
+#g-common_postsync :
+
+
+#-----------------------------------------------------------
+# Layman user info
+#
+# The user name and email to use when adding new repos
+#
+#git_user : layman
+#git_email : layman@localhost
+
+
-/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.4/32
-/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.4
+/usr/lib/gcc/x86_64-pc-linux-gnu/4.6.3/32
+/usr/lib/gcc/x86_64-pc-linux-gnu/4.6.3
# Be careful if there there are symbolic links or multiple filesystem
# entries for the same device as each name is checked separately against
- # the list of patterns. The effect is that if any name matches any 'a'
- # pattern, the device is accepted; otherwise if any name matches any 'r'
- # pattern it is rejected; otherwise it is accepted.
+ # the list of patterns. The effect is that if the first pattern in the
+ # list to match a name is an 'a' pattern for any of the names, the device
+ # is accepted; otherwise if the first pattern in the list to match a name
+ # is an 'r' pattern for any of the names it is rejected; otherwise it is
+ # accepted.
# Don't have more than one filter line active at once: only one gets used.
# It is safe to delete the contents: the tools regenerate it.
# (The old setting 'cache' is still respected if neither of
# these new ones is present.)
+ # N.B. If obtain_device_list_from_udev is set to 1 the list of
+ # devices is instead obtained from udev and any existing .cache
+ # file is removed.
cache_dir = "/etc/lvm/cache"
cache_file_prefix = ""
# 1 enables; 0 disables.
sysfs_scan = 1
+ # By default, LVM2 will ignore devices used as component paths
+ # of device-mapper multipath devices.
+ # 1 enables; 0 disables.
+ multipath_component_detection = 1
+
# By default, LVM2 will ignore devices used as components of
# software RAID (md) devices by looking for md superblocks.
# 1 enables; 0 disables.
# This section allows you to configure the way in which LVM selects
# free space for its Logical Volumes.
-#allocation {
-# When searching for free space to extend an LV, the "cling"
-# allocation policy will choose space on the same PVs as the last
-# segment of the existing LV. If there is insufficient space and a
-# list of tags is defined here, it will check whether any of them are
-# attached to the PVs concerned and then seek to match those PV tags
-# between existing extents and new extents.
-# Use the special tag "@*" as a wildcard to match any PV tag.
-#
-# Example: LVs are mirrored between two sites within a single VG.
-# PVs are tagged with either @site1 or @site2 to indicate where
-# they are situated.
-#
-# cling_tag_list = [ "@site1", "@site2" ]
-# cling_tag_list = [ "@*" ]
-#
-# Changes made in version 2.02.85 extended the reach of the 'cling'
-# policies to detect more situations where data can be grouped
-# onto the same disks. Set this to 0 to revert to the previous
-# algorithm.
-#
-# maximise_cling = 1
-#
-# Set to 1 to guarantee that mirror logs will always be placed on
-# different PVs from the mirror images. This was the default
-# until version 2.02.85.
-#
-# mirror_logs_require_separate_pvs = 0
-#}
+allocation {
+
+ # When searching for free space to extend an LV, the "cling"
+ # allocation policy will choose space on the same PVs as the last
+ # segment of the existing LV. If there is insufficient space and a
+ # list of tags is defined here, it will check whether any of them are
+ # attached to the PVs concerned and then seek to match those PV tags
+ # between existing extents and new extents.
+ # Use the special tag "@*" as a wildcard to match any PV tag.
+
+ # Example: LVs are mirrored between two sites within a single VG.
+ # PVs are tagged with either @site1 or @site2 to indicate where
+ # they are situated.
+
+ # cling_tag_list = [ "@site1", "@site2" ]
+ # cling_tag_list = [ "@*" ]
+
+ # Changes made in version 2.02.85 extended the reach of the 'cling'
+ # policies to detect more situations where data can be grouped
+ # onto the same disks. Set this to 0 to revert to the previous
+ # algorithm.
+ maximise_cling = 1
+
+ # Set to 1 to guarantee that mirror logs will always be placed on
+ # different PVs from the mirror images. This was the default
+ # until version 2.02.85.
+ mirror_logs_require_separate_pvs = 0
+
+ # Set to 1 to guarantee that thin pool metadata will always
+ # be placed on different PVs from the pool data.
+ thin_pool_metadata_require_separate_pvs = 0
+}
# This section that allows you to configure the nature of the
# information that LVM2 reports.
# Local non-LV directory that holds file-based locks while commands are
# in progress. A directory like /tmp that may get wiped on reboot is OK.
- locking_dir = "/var/lock/lvm"
+ locking_dir = "/run/lock/lvm"
# Whenever there are competing read-only and read-write access requests for
# a volume group's metadata, instead of always granting the read-only
# "mirror" - The original RAID1 implementation provided by LVM2/DM. It is
# characterized by a flexible log solution (core, disk, mirrored)
# and by the necessity to block I/O while reconfiguring in the
- # event of a failure. Snapshots of this type of RAID1 can be
- # problematic.
+ # event of a failure.
+ #
+ # There is an inherent race in the dmeventd failure handling
+ # logic with snapshots of devices using this type of RAID1 that
+ # in the worst case could cause a deadlock.
+ # Ref: https://bugzilla.redhat.com/show_bug.cgi?id=817130#c10
#
# "raid1" - This implementation leverages MD's RAID1 personality through
# device-mapper. It is characterized by a lack of log options.
# on the same device as the image - no separate devices are
# required.) This mirror implementation does not require I/O
# to be blocked in the kernel in the event of a failure.
+ # This mirror implementation is not cluster-aware and cannot be
+ # used in a shared (active/active) fashion in a cluster.
#
# Specify the '--type <mirror|raid1>' option to override this default
# setting.
mirror_segtype_default = "mirror"
+
+ # The default format for displaying LV names in lvdisplay was changed
+ # in version 2.02.89 to show the LV name and path separately.
+ # Previously this was always shown as /dev/vgname/lvname even when that
+ # was never a valid path in the /dev filesystem.
+ # Set to 1 to reinstate the previous format.
+ #
+ # lvdisplay_shows_full_device_path = 0
+
+ # Whether to use (trust) a running instance of lvmetad. If this is set to
+ # 0, all commands fall back to the usual scanning mechanisms. When set to 1
+ # *and* when lvmetad is running (it is not auto-started), the volume group
+ # metadata and PV state flags are obtained from the lvmetad instance and no
+ # scanning is done by the individual commands. In a setup with lvmetad,
+ # lvmetad udev rules *must* be set up for LVM to work correctly. Without
+ # proper udev rules, all changes in block device configuration will be
+ # *ignored* until a manual 'vgscan' is performed.
+ use_lvmetad = 0
+
+ # Full path of the utility called to check that a thin metadata device
+ # is in a state that allows it to be used.
+ # Each time a thin pool needs to be activated or after it is deactivated
+ # this utility is executed. The activation will only proceed if the utility
+ # has an exit status of 0.
+ # Set to "" to skip this check. (Not recommended.)
+ # The thin tools are available as part of the device-mapper-persistent-data
+ # package from https://github.com/jthornber/thin-provisioning-tools.
+ #
+ thin_check_executable = "/sbin/thin_check"
+
+ # String with options passed with thin_check command. By default,
+ # option '-q' is for quiet output.
+ thin_check_options = [ "-q" ]
}
activation {
# Useful for diagnosing problems with LVM2/udev interactions.
verify_udev_operations = 0
+ # If set to 1 and if deactivation of an LV fails, perhaps because
+ # a process run from a quick udev rule temporarily opened the device,
+ # retry the operation for a few seconds before failing.
+ retry_deactivation = 1
+
# How to fill in missing stripes if activating an incomplete volume.
# Using "error" will make inaccessible parts of the device return
# I/O errors on access. You can instead use a device path, in which
# or snapshotted volumes is likely to result in data corruption.
missing_stripe_filler = "error"
+ # The linear target is an optimised version of the striped target
+ # that only handles a single stripe. Set this to 0 to disable this
+ # optimisation and always use the striped target.
+ use_linear_target = 1
+
# How much stack (in KB) to reserve for use while devices suspended
- reserved_stack = 256
+ # Prior to version 2.02.89 this used to be set to 256KB
+ reserved_stack = 64
# How much memory (in KB) to reserve for use while devices suspended
reserved_memory = 8192
#
# volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
+ # If auto_activation_volume_list is defined, each LV that is to be
+ # activated is checked against the list while using the autoactivation
+ # option (--activate ay/-a ay), and if it matches, it is activated.
+ # "vgname" and "vgname/lvname" are matched exactly.
+ # "@tag" matches any tag set in the LV or VG.
+ # "@*" matches if any tag defined on the host is also set in the LV or VG
+ #
+ # auto_activation_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
+
+ # If read_only_volume_list is defined, each LV that is to be activated
+ # is checked against the list, and if it matches, it as activated
+ # in read-only mode. (This overrides '--permission rw' stored in the
+ # metadata.)
+ # "vgname" and "vgname/lvname" are matched exactly.
+ # "@tag" matches any tag set in the LV or VG.
+ # "@*" matches if any tag defined on the host is also set in the LV or VG
+ #
+ # read_only_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
+
# Size (in KB) of each copy operation when mirroring
mirror_region_size = 512
# "auto" - Use default value chosen by kernel.
readahead = "auto"
+ # 'raid_fault_policy' defines how a device failure in a RAID logical
+ # volume is handled. This includes logical volumes that have the following
+ # segment types: raid1, raid4, raid5*, and raid6*.
+ #
+ # In the event of a failure, the following policies will determine what
+ # actions are performed during the automated response to failures (when
+ # dmeventd is monitoring the RAID logical volume) and when 'lvconvert' is
+ # called manually with the options '--repair' and '--use-policies'.
+ #
+ # "warn" - Use the system log to warn the user that a device in the RAID
+ # logical volume has failed. It is left to the user to run
+ # 'lvconvert --repair' manually to remove or replace the failed
+ # device. As long as the number of failed devices does not
+ # exceed the redundancy of the logical volume (1 device for
+ # raid4/5, 2 for raid6, etc) the logical volume will remain
+ # usable.
+ #
+ # "allocate" - Attempt to use any extra physical volumes in the volume
+ # group as spares and replace faulty devices.
+ #
+ raid_fault_policy = "warn"
+
# 'mirror_image_fault_policy' and 'mirror_log_fault_policy' define
- # how a device failure affecting a mirror is handled.
- # A mirror is composed of mirror images (copies) and a log.
+ # how a device failure affecting a mirror (of "mirror" segment type) is
+ # handled. A mirror is composed of mirror images (copies) and a log.
# A disk log ensures that a mirror does not need to be re-synced
# (all copies made the same) every time a machine reboots or crashes.
#
snapshot_autoextend_threshold = 100
snapshot_autoextend_percent = 20
+ # 'thin_pool_autoextend_threshold' and 'thin_pool_autoextend_percent' define
+ # how to handle automatic pool extension. The former defines when the
+ # pool should be extended: when its space usage exceeds this many
+ # percent. The latter defines how much extra space should be allocated for
+ # the pool, in percent of its current size.
+ #
+ # For example, if you set thin_pool_autoextend_threshold to 70 and
+ # thin_pool_autoextend_percent to 20, whenever a pool exceeds 70% usage,
+ # it will be extended by another 20%. For a 1G pool, using up 700M will
+ # trigger a resize to 1.2G. When the usage exceeds 840M, the pool will
+ # be extended to 1.44G, and so on.
+ #
+ # Setting thin_pool_autoextend_threshold to 100 disables automatic
+ # extensions. The minimum value is 50 (A setting below 50 will be treated
+ # as 50).
+
+ thin_pool_autoextend_threshold = 100
+ thin_pool_autoextend_percent = 20
+
# While activating devices, I/O to devices being (re)configured is
# suspended, and as a precaution against deadlocks, LVM2 needs to pin
# any memory it is using so it is not paged out. Groups of pages that
snapshot_library = "libdevmapper-event-lvm2snapshot.so"
+ # thin_library is the library used when monitoring a thin device.
+ #
+ # "libdevmapper-event-lvm2thin.so" monitors the filling of
+ # pool and emits a warning through syslog when the use of
+ # the pool exceeds 80%. The warning is repeated when 85%, 90% and
+ # 95% of the pool is filled.
+
+ thin_library = "libdevmapper-event-lvm2thin.so"
+
# Full path of the dmeventd binary.
#
# executable = "/sbin/dmeventd"
+++ /dev/null
-# These settings were set by the catalyst build script that automatically
-# built this stage.
-# Please consult /usr/share/portage/config/make.conf.example for a more
-# detailed example.
-CFLAGS="-O2 -pipe"
-CXXFLAGS="${CFLAGS}"
-# WARNING: Changing your CHOST is not something that should be done lightly.
-# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
-CHOST="x86_64-pc-linux-gnu"
-
-MAKEOPTS="-j5"
-#MAKEOPTS="-j1"
-
-GENTOO_MIRRORS="http://ftp.snt.utwente.nl/pub/os/linux/gentoo http://mirrors.sec.informatik.tu-darmstadt.de/gentoo/"
-#GENTOO_MIRRORS="http://linux.rz.ruhr-uni-bochum.de/download/gentoo-mirror/ http://ftp.snt.utwente.nl/pub/os/linux/gentoo http://mirrors.sec.informatik.tu-darmstadt.de/gentoo/"
-#GENTOO_MIRRORS="http://gentoo.mirror.web4u.cz/ ftp://ftp.wh2.tu-dresden.de/pub/mirrors/gentoo ftp://gentoo.mirror.dkm.cz/pub/gentoo/ ftp://mirror.bytemark.co.uk/gentoo/"
-
-PORT_LOGDIR=/var/log/portage
-
-PORTDIR_OVERLAY="/usr/local/portage"
-
-PORTAGE_RSYNC_OPTS="${PORTAGE_RSYNC_OPTS} --progress"
-
-PORTAGE_NICENESS=3
-AUTOCLEAN="yes"
-
-ACCEPT_LICENSE=" \
- DOOM3 \
- PUEL \
- RTCW \
- RTCW-ETEULA \
- dlj-1.1 \
- sun-bcla-java-vm \
- AdobeFlash-10 \
- AdobeFlash-10.1 \
- AdobeFlash-10.3 \
- skype-eula \
- skype-4.0.0.7-copyright \
- Oracle-BCLA-JavaSE \
-"
-
-EMERGE_DEFAULT_OPTS="--with-bdeps y --quiet-build=y --jobs=4 --load-average=10"
-#EMERGE_DEFAULT_OPTS="--with-bdeps y"
-
-CONFIG_PROTECT="/usr/share/xsessions \
- /var/www/localhost/htdocs/phpmyadmin \
- /var/lib/samba/private \
- /var/www/localhost/htdocs/cacti \
- /var/www/ldap/htdocs/config \
- /var/www/ldap/htdocs/templates \
- /usr/share/genkernel/arch/x86 \
- /usr/share/config/kdm \
-"
-
-#CONFIG_PROTECT_MASK="/etc/init.d"
-
-FEATURES="parallel-fetch userpriv usersandbox"
-
-#FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp -P \${DISTDIR} \${URI}"
-#FETCHCOMMAND="mv -v \${DISTDIR}/.old/\${FILE} \${DISTDIR}/"
-
-#LINGUAS="ar bg cs da de el en en_GB en_US es es_ES es_MX fi fr fr_CA fy it ja he hsb hu la nn nn_NO no nds nl oc pl pt pt_BR pt_PT ru sv sv_SE tr uk vi zh_CN zh_HK zh_TW"
-LINGUAS="de en en_GB en_US ru vi"
-
-# These are the USE flags that were used in addition to what is provided by the
-# profile used for building.
-USE="3dnow 3dnowext X Xaw3d a52 aac aalib acl acpi ads aim alsa altnburgcards
- amr ao apache2 archive audiofile avahi bash-completion bazaar bluray branding bzip2 cairo
- calendar caps cdda cddb cdparanoia cdr cgi cpudetection cscope css ctype cups curl
- curlwrappers cvs dbase dbus dga djvu doc dts dv dvb dvd dvdr dvdread eds examples
- encode exif expat fam fastcgi ffmpeg fftw fits flac flatfile fltk fontconfig
- foomaticdb ftp gconf gd gd-external ggi gif gimp git glade glib gmp gnome gnome-keyring
- gnustep gphoto2 graphviz gsl gsm gstreamer gtk gtk3 gtkhtml handbook hal hscolour html iconv icu id3 id3tag idea
- idn ieee1394 imagemagick imap imlib inifile ithreads java javascript
- jabber jack java6 jbig jikes jingle jpeg jpeg2k json-syck json-xs kde kdeenablefinal kdeprefix kerberos
- keyring kig-scripting kpathsea lame latex lcms ldap libcaca
- libnotify libsamplerate libwww live lm_sensors log4j logrotate lua lzma lzo mad meanwhile mercurial
- midi mhash mmx mmxext mng modperl modplug motif mp3 mp4 mpeg mplayer msn mtp
- musepack musicbrainz mysql mysqli nas nautilus ncurses next networkmanager nfs nis
- nptl nsplugin numpy odbc ogg openal openexr opengl pango par pch pcntl pcre pdf perl
- perlsuid php plasma plotutils png policykit portaudio posix postgres postscript ppds projectm pulseaudio python quicktime real
- rdesktop rle samba sasl sdl semantic-desktop session sharedmem sid simplexml sip skype slang slp
- sndfile soap sockets sox spamassassin speex spell sqlite sqlite3 srtp sse sse2 ssh
- subversion svg sysvipc tetex theora threads thumbnail tidy timidity tiff
- tools truetype twolame udev unicode usb v4l v4l2 vcd vidix video vim-syntax vorbis wav wavpack
- wddx webdav webkit win32codecs wma wmf x264 xattr xcomposite xface xft xine
- xinetd xml xmlrpc xmp xosd xpm xprint xscreensaver xsl xulrunner xvid yahoo
- yaz yv12 zeroconf zlib
- "
-
-# aqua darcs kate qt3 qt4 skey
-
-APACHE2_MPMS="prefork"
-APACHE2_MODULES="actions alias asis auth_basic auth_digest authn_alias authn_anon
- authn_dbd authn_dbm authn_default authn_file authz_dbm authz_default
- authz_groupfile authz_host authz_owner authz_user autoindex cache
- cern_meta cgi cgid charset_lite dav dav_fs dav_lock dbd deflate dir
- disk_cache dumpio env expires ext_filter file_cache filter headers
- ident imagemap include info log_config log_forensic logio mem_cache
- mime mime_magic negotiation proxy proxy_ajp proxy_balancer
- proxy_connect proxy_ftp proxy_http rewrite setenvif so speling
- status substitute unique_id userdir usertrack version vhost_alias
- "
-
-INPUT_DEVICES="evdev keyboard mouse"
-
-VIDEO_CARDS="dummy fbdev radeon radeonhd svga vesa vga v4l"
-
-CAMERAS="adc65 agfa_cl20 aox ax203 barbie canon casio_qv clicksmart310 digigr8 \
- digita dimagev dimera3500 directory enigma13 fuji gsmart300 hp215 \
- iclick jamcam jd11 jl2005a jl2005c kodak_dc120 kodak_dc210 \
- kodak_dc240 kodak_dc3200 kodak_ez200 konica konica_qm150 largan \
- lg_gsm mars mustek panasonic_coolshot panasonic_dc1000 \
- panasonic_dc1580 panasonic_l859 pccam300 pccam600 polaroid_pdc320 \
- polaroid_pdc640 polaroid_pdc700 ptp2 ricoh ricoh_g3 samsung sierra \
- sipix_blink sipix_blink2 sipix_web2 smal sonix sony_dscf1 sony_dscf55 \
- soundvision spca50x sq905 st2205 stv0674 stv0680 sx330z template \
- topfield toshiba_pdrm11 tp6801"
-
-LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer nlpsolver \
- pdfimport scripting-javascript"
-# scripting-beanshell wiki-publisher
-
-source /var/lib/layman/make.conf
-
+++ /dev/null
-# This file lists modules which will not be loaded by udev,
-# not at coldplugging and not on hotplug events.
-
-# Add your own entries to this file
-# in the format "blacklist <name of module>"
-
-# Some examples:
-# evbug is a debug tool and should be loaded explicitly
-blacklist evbug
-
-# Autoloading eth1394 most of the time re-orders your network
-# interfaces, and with buggy kernel 2.6.21, udev persistent-net
-# is not able to rename these devices, so you get eth?_rename devices
-# plus an exceeded 30sec boot timeout
-blacklist eth1394
-
-# You probably want this to not get the console beep loud on every tab :)
-#blacklist pcspkr
-
-# these drivers are very simple, the HID drivers are usually preferred
-#blacklist usbmouse
-#blacklist usbkbd
-
-# Sometimes loading a framebuffer driver at boot gets the console black
-#install pci:v*d*sv*sd*bc03sc*i* /bin/true
-
-# hplip and cups 1.4+ use raw USB devices, so it requires usblp not be loaded
-#blacklist usblp
-
+++ /dev/null
-# /etc/modprobe.d/pnp-aliases
-#
-# These aliases are used by this udev-rule:
-# SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN+="/bin/sh -c '/sbin/modprobe -a $$(while read id; do echo pnp:d$$id; done < /sys$devpath/id)'"
-#
-# They should help to autoload drivers used by various pnp-devices
-# (if not blacklisted somewhere else)
-#
-alias pnp:dPNP0510 irtty-sir
-alias pnp:dPNP0511 irtty-sir
-alias pnp:dPNP0700 floppy
-alias pnp:dPNP0800 pcspkr
-alias pnp:dPNP0b00 rtc
-alias pnp:dPNP0303 atkbd
-alias pnp:dPNP0f13 psmouse
-alias pnp:dPNPb02f analog
-
+++ /dev/null
-softdep uhci_hcd pre: ehci_hcd
-softdep ohci_hcd pre: ehci_hcd
# /etc/mysql/my.cnf: The global mysql configuration file.
-# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.3 2012/02/15 02:07:21 jmbsvicetto Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.4 2013/01/20 02:40:02 robbat2 Exp $
# The following options will be passed to all MySQL clients
[client]
memcached:x:115:2:added by portage for memcached:/dev/null:/sbin/nologin
polkitd:x:116:987:added by portage for polkit:/var/lib/polkit-1:/sbin/nologin
backuppc:x:117:986:added by portage for backuppc:/var/lib/backuppc:/bin/bash
+saned:x:118:995:added by portage for sane-backends:/dev/null:/sbin/nologin
postgres:x:70:70:added by portage for postgresql-server:/var/lib/postgresql:/bin/bash
memcached:x:115:2:added by portage for memcached:/dev/null:/sbin/nologin
polkitd:x:116:987:added by portage for polkit:/var/lib/polkit-1:/sbin/nologin
+backuppc:x:117:986:added by portage for backuppc:/var/lib/backuppc:/bin/bash
+++ /dev/null
-[Let users in plugdev group modify NetworkManager]
-Identity=unix-group:plugdev
-Action=org.freedesktop.NetworkManager.settings.modify.system
-ResultAny=no
-ResultInactive=no
-ResultActive=yes
\ No newline at end of file
--- /dev/null
+# These settings were set by the catalyst build script that automatically
+# built this stage.
+# Please consult /usr/share/portage/config/make.conf.example for a more
+# detailed example.
+CFLAGS="-O2 -pipe"
+CXXFLAGS="${CFLAGS}"
+# WARNING: Changing your CHOST is not something that should be done lightly.
+# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
+CHOST="x86_64-pc-linux-gnu"
+
+MAKEOPTS="-j5"
+#MAKEOPTS="-j1"
+
+GENTOO_MIRRORS="http://ftp.snt.utwente.nl/pub/os/linux/gentoo http://mirrors.sec.informatik.tu-darmstadt.de/gentoo/"
+#GENTOO_MIRRORS="http://linux.rz.ruhr-uni-bochum.de/download/gentoo-mirror/ http://ftp.snt.utwente.nl/pub/os/linux/gentoo http://mirrors.sec.informatik.tu-darmstadt.de/gentoo/"
+#GENTOO_MIRRORS="http://gentoo.mirror.web4u.cz/ ftp://ftp.wh2.tu-dresden.de/pub/mirrors/gentoo ftp://gentoo.mirror.dkm.cz/pub/gentoo/ ftp://mirror.bytemark.co.uk/gentoo/"
+
+PORT_LOGDIR=/var/log/portage
+
+PORTDIR_OVERLAY="/usr/local/portage"
+
+PORTAGE_RSYNC_OPTS="${PORTAGE_RSYNC_OPTS} --progress"
+
+PORTAGE_NICENESS=3
+AUTOCLEAN="yes"
+
+ACCEPT_LICENSE=" \
+ DOOM3 \
+ PUEL \
+ RTCW \
+ RTCW-ETEULA \
+ dlj-1.1 \
+ sun-bcla-java-vm \
+ AdobeFlash-10 \
+ AdobeFlash-10.1 \
+ AdobeFlash-10.3 \
+ skype-eula \
+ skype-4.0.0.7-copyright \
+ Oracle-BCLA-JavaSE \
+"
+
+EMERGE_DEFAULT_OPTS="--with-bdeps y --quiet-build=y --jobs=4 --load-average=10"
+#EMERGE_DEFAULT_OPTS="--with-bdeps y"
+
+CONFIG_PROTECT="/usr/share/xsessions \
+ /var/www/localhost/htdocs/phpmyadmin \
+ /var/lib/samba/private \
+ /var/www/localhost/htdocs/cacti \
+ /var/www/ldap/htdocs/config \
+ /var/www/ldap/htdocs/templates \
+ /usr/share/genkernel/arch/x86 \
+ /usr/share/config/kdm \
+"
+
+#CONFIG_PROTECT_MASK="/etc/init.d"
+
+FEATURES="parallel-fetch userpriv usersandbox"
+
+#FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp -P \${DISTDIR} \${URI}"
+#FETCHCOMMAND="mv -v \${DISTDIR}/.old/\${FILE} \${DISTDIR}/"
+
+#LINGUAS="ar bg cs da de el en en_GB en_US es es_ES es_MX fi fr fr_CA fy it ja he hsb hu la nn nn_NO no nds nl oc pl pt pt_BR pt_PT ru sv sv_SE tr uk vi zh_CN zh_HK zh_TW"
+LINGUAS="de en en_GB en_US ru vi"
+
+# These are the USE flags that were used in addition to what is provided by the
+# profile used for building.
+USE="3dnow 3dnowext X Xaw3d a52 aac aalib acl acpi ads aim alsa altnburgcards
+ amr ao apache2 archive audiofile avahi bash-completion bazaar bluray branding bzip2 cairo
+ calendar caps cdda cddb cdparanoia cdr cgi cpudetection cscope css ctype cups curl
+ curlwrappers cvs dbase dbus dga djvu doc dts dv dvb dvd dvdr dvdread eds examples
+ encode exif expat fam fastcgi ffmpeg fftw fits flac flatfile fltk fontconfig
+ foomaticdb ftp gconf gd gd-external ggi gif gimp git glade glib gmp gnome gnome-keyring
+ gnustep gphoto2 graphviz gsl gsm gstreamer gtk gtk3 gtkhtml handbook hal hscolour html iconv icu id3 id3tag idea
+ idn ieee1394 imagemagick imap imlib inifile ithreads java javascript
+ jabber jack java6 jbig jikes jingle jpeg jpeg2k json-syck json-xs kde kdeenablefinal kdeprefix kerberos
+ keyring kig-scripting kpathsea lame latex lcms ldap libcaca
+ libnotify libsamplerate libwww live lm_sensors log4j logrotate lua lzma lzo mad meanwhile mercurial
+ midi mhash mmx mmxext mng modperl modplug motif mp3 mp4 mpeg mplayer msn mtp
+ musepack musicbrainz mysql mysqli nas nautilus ncurses next networkmanager nfs nis
+ nptl nsplugin numpy odbc ogg openal openexr opengl opus pango par pch pcntl pcre pdf perl
+ perlsuid php plasma plotutils png policykit portaudio posix postgres postscript ppds projectm pulseaudio python quicktime real
+ rdesktop rle samba sasl sdl semantic-desktop session sharedmem sid simplexml sip skype slang slp
+ sndfile soap sockets sox spamassassin speex spell sqlite sqlite3 srtp sse sse2 ssh
+ subversion svg sysvipc tetex theora threads thumbnail tidy timidity tiff
+ tools truetype twolame udev unicode usb v4l v4l2 vala vcd vidix video vim-syntax vorbis wav wavpack
+ wddx webdav webkit win32codecs wma wmf x264 xattr xcomposite xface xft xine
+ xinetd xml xmlrpc xmp xosd xpm xprint xscreensaver xsl xulrunner xvid yahoo
+ yaz yv12 zeroconf zlib
+ "
+
+# aqua darcs kate qt3 qt4 skey
+
+APACHE2_MPMS="prefork"
+APACHE2_MODULES="actions alias asis auth_basic auth_digest authn_alias authn_anon
+ authn_dbd authn_dbm authn_default authn_file authz_dbm authz_default
+ authz_groupfile authz_host authz_owner authz_user autoindex cache
+ cern_meta cgi cgid charset_lite dav dav_fs dav_lock dbd deflate dir
+ disk_cache dumpio env expires ext_filter file_cache filter headers
+ ident imagemap include info log_config log_forensic logio mem_cache
+ mime mime_magic negotiation proxy proxy_ajp proxy_balancer
+ proxy_connect proxy_ftp proxy_http rewrite setenvif so speling
+ status substitute unique_id userdir usertrack version vhost_alias
+ "
+
+INPUT_DEVICES="evdev keyboard mouse"
+
+VIDEO_CARDS="dummy fbdev radeon radeonhd svga vesa vga v4l"
+
+CAMERAS="adc65 agfa_cl20 aox ax203 barbie canon casio_qv clicksmart310 digigr8 \
+ digita dimagev dimera3500 directory enigma13 fuji gsmart300 hp215 \
+ iclick jamcam jd11 jl2005a jl2005c kodak_dc120 kodak_dc210 \
+ kodak_dc240 kodak_dc3200 kodak_ez200 konica konica_qm150 largan \
+ lg_gsm mars mustek panasonic_coolshot panasonic_dc1000 \
+ panasonic_dc1580 panasonic_l859 pccam300 pccam600 polaroid_pdc320 \
+ polaroid_pdc640 polaroid_pdc700 ptp2 ricoh ricoh_g3 samsung sierra \
+ sipix_blink sipix_blink2 sipix_web2 smal sonix sony_dscf1 sony_dscf55 \
+ soundvision spca50x sq905 st2205 stv0674 stv0680 sx330z template \
+ topfield toshiba_pdrm11 tp6801"
+
+LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer nlpsolver \
+ pdfimport scripting-javascript"
+# scripting-beanshell wiki-publisher
+
+source /var/lib/layman/make.conf
+
dev-util/gtk-doc highlight vim
dev-util/strace aio
-dev-vcs/git tk
+dev-vcs/git highlight tk
dev-vcs/subversion -dso extras -ruby
games-misc/fortune-mod offensive
media-libs/alsa-lib alisp
media-libs/faad2 digitalradio
media-libs/fontconfig -doc
-media-libs/freetype utils
+media-libs/freetype infinality utils
# media-libs/gd fontconfig
media-libs/gegl -ffmpeg graphviz raw
media-libs/giflib rle
net-libs/xulrunner system-sqlite wifi
net-misc/curl libssh2
-net-misc/networkmanager dhcpcd -gnutls nss
+net-misc/iputils caps gnutls
+net-misc/networkmanager dhcpcd nss
net-misc/ntp parse-clocks -zeroconf
net-misc/openssh X509 sftplogging
net-misc/openvpn eurephia iproute2 passwordsave
www-apps/syscp aps autoresponder billing bind domainkey fcgid mailquota
www-client/elinks finger gopher -ruby
-www-client/firefox mozdevelop system-sqlite wifi xforms
+www-client/firefox mozdevelop system-jpeg system-sqlite wifi xforms
www-client/opera -qt3
www-servers/apache sni suexec -threads
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.4/html
+html_directory = /usr/share/doc/postfix-2.9.5/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.4/readme
+readme_directory = /usr/share/doc/postfix-2.9.5/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
export ANT_HOME='/usr/share/ant'
export CONFIG_PROTECT='/usr/share/gnupg/qualified.txt /var/lib/hsqldb /usr/share/config /usr/share/openvpn/easy-rsa'
-export CONFIG_PROTECT_MASK='/etc/gentoo-release /etc/sandbox.d /etc/env.d/java/ /etc/php/cli-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/apache2-php5.3/ext-active/ /etc/php/cli-php5.4/ext-active/ /etc/php/cgi-php5.4/ext-active/ /etc/php/apache2-php5.4/ext-active/ /etc/fonts/fonts.conf ${EPREFIX}/etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
+export CONFIG_PROTECT_MASK='/etc/gentoo-release /etc/sandbox.d /etc/php/cli-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/apache2-php5.3/ext-active/ /etc/php/cli-php5.4/ext-active/ /etc/php/cgi-php5.4/ext-active/ /etc/php/apache2-php5.4/ext-active/ /etc/fonts/fonts.conf ${EPREFIX}/etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
export EDITOR='/usr/bin/vim'
export FLTK_DOCDIR='/usr/share/doc/fltk-1.3.0-r1/html'
export GCC_SPECS=''
export GDK_USE_XFT='1'
export GSETTINGS_BACKEND='dconf'
export HG='/usr/bin/hg'
-export INFOPATH='/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/info'
+export INFOPATH='/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/info'
export JAVACC_HOME='/usr/share/javacc/'
export LANG='de_DE.UTF-8'
export LC_ADDRESS='de_DE.utf8'
export LESS='-R -M --shift 5'
export LESSOPEN='|lesspipe %s'
export LIBBLURAY_CP='/usr/share/libbluray/lib/libbluray.jar'
-export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man:/etc/java-config/system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.2/man/'
+export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.2/man/'
export MULTIOSDIRS='../lib64:../lib32'
export OPENGL_PROFILE='xorg-x11'
export PAGER='/usr/bin/less'
-export PATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.4:/usr/lib64/subversion/bin:/usr/games/bin'
+export PATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.6.3:/usr/lib64/subversion/bin:/usr/games/bin'
export PRELINK_PATH_MASK='/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so:/opt/bin/skype'
export PYTHONDOCS_2_7='/usr/share/doc/python-docs-2.7.2/html/library'
export PYTHONDOCS_3_2='/usr/share/doc/python-docs-3.2.2/html/library'
export PYTHONPATH='/usr/lib/portage/pym'
export QT_GRAPHICSSYSTEM='raster'
export QT_PLUGIN_PATH='/usr/lib64/kde4/plugins'
-export ROOTPATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.4:/usr/lib64/subversion/bin'
+export ROOTPATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.6.3:/usr/lib64/subversion/bin'
export RUBYOPT='-rauto_gem'
export R_HOME='/usr/lib64/R'
-export SANE_CONFIG_DIR='/etc/sane.d'
-export USB_DEVFS_PATH='/dev/bus/usb'
export VBOX_APP_HOME='/usr/lib64/virtualbox'
export XDG_CONFIG_DIRS='/etc/xdg'
export XDG_DATA_DIRS='/usr/local/share:/usr/share:/usr/share/gdm'
-# Generated by net-scripts for interface eth0
+# Hand made by Frank Brehm
domain brehm-online.com
-search home.brehm-online.com home.hennig-berlin.org brehm-online.com hennig-berlin.org uhu-banane.de
-nameserver 10.12.11.1
+search brehm-online.com hennig-berlin.org uhu-banane.de profitbricks.localdomain dc1.de.profitbricks.net dc2.us.profitbricks.net pb.local
+#nameserver 10.12.11.1
+nameserver 192.168.178.30
+nameserver 192.168.178.89
+++ /dev/null
-SEARCH_DIRS_MASK="/opt/icedtea-bin-7.2.3.3"
-SEARCH_DIRS_MASK="/opt/sun-jdk-1.6.0.37"
+SEARCH_DIRS_MASK="/opt/sun-jdk-1.6.0.38"
-SEARCH_DIRS_MASK="/opt/sun-jre-bin-1.6.0.37"
+SEARCH_DIRS_MASK="/opt/sun-jre-bin-1.6.0.38"
+++ /dev/null
-/etc/init.d/udev-postmount
\ No newline at end of file
+++ /dev/null
-SANDBOX_PREDICT="/proc/self/coredump_filter"
hs2p
ibm
kodak
+kodakaio
kvs1025
kvs20xx
leo
# to set data buffer size, in bytes
# the value ranges from 4096 - infinity
-# but you may have scanning problems with
-# a value larger than 65536 (the default)
+# but old scanners may have scanning problems
+# with a value larger than 65536 (the default)
+# NOTE: this option is set to a larger value
+# later in this file, for more recent scanners
option buffer-size 65536
# To search for all FUJITSU scsi devices
#fi-5530C2
usb 0x04c5 0x114a
+# More recent scanners need a larger buffer for maximum speed
+option buffer-size 262144
+
#fi-6140
usb 0x04c5 0x114d
#fi-6225
usb 0x04c5 0x11ef
-#fi-6145
+#fi-6140Z
usb 0x04c5 0x11f1
-#fi-6245
+#fi-6240Z
usb 0x04c5 0x11f2
-#fi-6135
+#fi-6130Z
usb 0x04c5 0x11f3
-#fi-6235
+#fi-6230Z
usb 0x04c5 0x11f4
#fi-6110
# Panasonic KV-SS080
usb 0x04da 0x100f
+# Hewlett Packard ScanJet 4850C
+usb 0x03f0 0x1b05
+
# Hewlett Packard ScanJet G4010
usb 0x03f0 0x4505
# Plustek OpticBook 3600
usb 0x07b3 0x0900
+
+# Primax Electronics, Ltd Xerox 2400 Onetouch
+usb 0x0461 0x038b
+
+#Hewlett Packard ScanJet N6310
+usb 0x03f0 0x4705
-# gt68xx.conf: Configuration file for GT68XX based scanners (1.0.22)
+# gt68xx.conf: Configuration file for GT68XX based scanners (1.0.23)
# Read man sane-gt68xx for documentation
# Put the firmware file into "/usr/share/sane/gt68xx/".
--- /dev/null
+### kodakaio.conf
+###
+### here are some examples for how to configure the kodakaio backend
+
+### Timeout settings: SNMP autodetection, Scan data read requests and other
+### read requests. All values are given in milliseconds,
+### i.e. 1000 is 1 second.
+
+# SNMP auto-detection waits 1.5 seconds
+snmp-timeout 1500
+
+# wait 15 seconds for scan data (scans may take several seconds to initialize,
+# so we need to wait longer)
+scan-data-timeout 7000
+
+# Wait 5 seconds for all other data requests
+request-timeout 5000
+
+
+### Network: Format is "net IP_ADDRESS [USB_ID]" or "net autodiscovery"
+### if USB_ID is left out, SNMP is used to detect the device type
+### Currently autodiscovery seems to not work
+### So always use "net IP_ADDRESS [USB_ID]" as shown below
+### You can find the printer's IP address on its control panel
+### There is a list of USB_IDs at the end of this file
+
+net autodiscovery
+
+### The following is a kodak HERO 9.1 with explicit IP-Address
+#net 10.0.0.5 0x4067
+
+# kodak ESP5250 is usb 0x040a 0x4041
+#net 192.168.1.4 0x4041
+# kodak HERO 9.1 is usb 0x040a 0x4067
+#net 192.168.1.17 0x4067
+
+### USB: format is "usb" for automatic (libusb) discovery, based on USB IDs,
+### or "usb <vendor ID> <device ID> to force the use of a particular
+### device (the backend has some additional checks and will not use
+### non-kodak devices, though)
+
+usb
+
+### For libusb support for unknown scanners use the following command
+### usb <product ID> <device ID>
+### e.g.:
+
+# kodak ESP5250 is usb 0x040a 0x4041
+#usb 0x040a 0x4041
+# kodak HERO 9.1 is usb 0x040a 0x4067
+#usb 0x040a 0x4067
+
+### List of USB device IDs
+# 0x4059, /* kodak ESP 2150 */
+# 0x4066, /* kodak ESP 2170 */
+# 0x4043, /* kodak ESP 3200 */
+# 0x4031, /* kodak ESP 3300 */
+# 0x4053, /* kodak ESP 4100 */
+# 0x4028, /* kodak ESP 5000 */
+# 0x4025, /* kodak ESP 5100 */
+# 0x4041, /* kodak ESP 5200 */
+# 0x4026, /* kodak ESP 5300 */
+# 0x4027, /* kodak ESP 5500 */
+# 0x4054, /* kodak ESP 6100 */
+# 0x4056, /* kodak ESP 7200 */
+# 0x4065, /* kodak ESP 9200 */
+# 0x4032, /* kodak ESP 5 */
+# 0x403E, /* kodak ESP 7 */
+# 0x403F, /* kodak ESP 9 */
+# 0x4057, /* kodak ESP C110 */
+# 0x4058, /* kodak ESP C115 */
+# 0x405D, /* kodak ESP C310 */
+# 0x405E, /* kodak ESP C315 */
+# 0x4060, /* ADVENT WiFi AIO AW10 */
+# 0x406D, /* kodak Hero 3.1 */
+# 0x4064, /* kodak Hero 5.1 */
+# 0x4062, /* kodak Office Hero 6.1 */
+# 0x4063, /* kodak Hero 7.1 */
+# 0x4067, /* kodak Hero 9.1 */
+
#scan-client.somedomain.firm
#192.168.0.1
#192.168.0.1/29
-#[2001:7a8:185e::42:12]
-#[2001:7a8:185e::42:12]/64
+#[2001:db8:185e::42:12]
+#[2001:db8:185e::42:12]/64
# NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and
# /etc/services must also be properly configured to start
#Samsung SCX4725-FN
usb 0x04e8 0x341f
+#Samsung CLX-216x Series
+usb 0x04e8 0x3425
+
#Samsung SCX-4500
usb 0x04e8 0x3426
# Samsung SCX-4824
usb 0x04e8 0x342c
+# Samsung SCX-4828FN or SCX-4x28 Series
+usb 0x04e8 0x342d
+
# Samsung SCX-4300
usb 0x04e8 0x342e
# Samsung SCX-4600
usb 0x04e8 0x3433
+# Samsung CLX 3185
+usb 0x04e8 0x343d
+
+# Samsung SCX-3205W
+usb 0x04e8 0x3441
+
#Xerox WorkCentre 3119 Series
usb 0x0924 0x4265
#Samsung SCX-4623
usb 0x04e8 0x3434
+#Samsung SCX-4623FW
+usb 0x04e8 0x3440
+
# Samsung SCX-4825FN
usb 0x04e8 0x343c
memcached:!:15566::::::
polkitd:!:15634::::::
backuppc:!:15706::::::
+saned:!:15734::::::
postgres:!:15371::::::
memcached:!:15566::::::
polkitd:!:15634::::::
+backuppc:!:15706::::::
80jadetex.cnf
./updmap.d:
-.keep_app-text_texlive-core-0
00updmap.cfg
+.keep_app-text_texlive-core-0
texlive-basic.cfg
texlive-context.cfg
texlive-fontsextra.cfg
texlive-science.cfg
./web2c:
-.keep_app-text_texlive-core-0
fmtutil.cnf
+.keep_app-text_texlive-core-0
texmf.cnf
updmap.cfg
--- /dev/null
+#
+# Udev 197 and above has implemented predictable network interface names
+# for hardware network interfaces. This new scheme does not affect
+# stacked network interfaces such as bonds, bridges or vlans.
+#
+# This file is here to prevent your interfaces from being renamed automatically,
+# because the new names will be drastically different from the eth*, wlan*, etc
+# names you are used to working with.
+#
+# To activate this function, move this file to a name that doesn't end in.rules,
+# or remove it then reboot your system.
+#
+# If you want to deactivate this function, install a udev rules file as
+# /etc/udev/rules.d/80-net-name-slot.rules then reboot your system.
+#
+# This functionality has not been tested with gentoo. In fact, we are aware that
+# things will break if you activate it.
+#
+# If you are not comfortable testing this, leave this file as is. We will
+# publish a news item when you can migrate.
+#
+# If you do want to activate and help us come up with a migration plan, feel
+# free to do so and report bugs.
+# Your bugs should block the following tracker:
+# https://bugs.gentoo.org/show_bug.cgi?id=450938
+#
+# Before you activate this function, it is important that you fully understand
+# the following documentation:
+#
+# http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
+#
+# Also, be aware that you can get the attributes of your network interface that
+# would be used to name the interface in the new scheme by doing the following
+# with this version of udev running:
+#
+# udevadm test-builtin net_id /sys/class/net/ifname 2> /dev/null
+#
+# for example, on my system, I can find that eth0's new name would be enp1s5.
+#
-# The initial syslog(3) priority: "err", "info", "debug" or its
-# numerical equivalent. For runtime debugging, the daemons internal
-# state can be changed with: "udevadm control --log-priority=<value>".
-udev_log="err"
-# If you need to change mount-options, do it in /etc/fstab
+# see udev(7) for details
+
+#udev_log="info"
--- /dev/null
+service sane-port
+{
+ socket_type = stream
+ server = /usr/sbin/saned
+ protocol = tcp
+ user = saned
+ group = scanner
+ wait = no
+ disable = yes
+}
projects / config / bruni / etc.git / commitdiff