+++ /dev/null
-#
-# dispatch-conf.conf
-#
-
-# Directory to archive replaced configs
-archive-dir=${EPREFIX}/etc/config-archive
-
-# Use rcs for storing files in the archive directory?
-# WARNING: When configured to use rcs, read and execute permissions of
-# archived files may be inherited from the first check in of a working
-# file, as documented in the ci(1) man page. This means that even if
-# the permissions of the working file have since changed, the older
-# permissions of the first check in may be inherited. As mentioned in
-# the ci(1) man page, users can control access to RCS files by setting
-# the permissions of the directory containing the files (see
-# archive-dir above).
-# (yes or no)
-use-rcs=no
-
-# Diff for display
-# %s old file
-# %s new file
-# If using colordiff instead of diff, the less -R option may be required
-# for correct display.
-diff="diff -Nu '%s' '%s'"
-
-# Set the pager for use with diff commands (this will
-# cause the PAGER environment variable to be ignored).
-# Setting pager="cat" will disable pager usage.
-pager=""
-
-# Default options used if less is the pager
-less-opts="--no-init --QUIT-AT-EOF"
-
-# Diff for interactive merges.
-# %s output file
-# %s old file
-# %s new file
-merge="sdiff --suppress-common-lines --output='%s' '%s' '%s'"
-
-# Automerge files comprising only CVS interpolations (e.g. Header or Id)
-# (yes or no)
-replace-cvs=yes
-
-# Automerge files comprising only whitespace and/or comments
-# (yes or no)
-replace-wscomments=no
-
-# Automerge files that the user hasn't modified
-# (yes or no)
-replace-unmodified=no
-
-# Ignore a version that is identical to the previously merged version,
-# even though it is different from the current user modified version
-# Note that emerge already has a similar feature enabled by default,
-# which can be disabled by the emerge --noconfmem option.
-# (yes or no)
-ignore-previously-merged=no
-
-# Per-session log file of changes made to configuration files
-#log-file=/var/log/dispatch-conf.log
-
-# List of frozen files for which dispatch-conf will automatically zap updates
-#frozen-files=""
mkdir -p './texmf/dvips.d'
mkdir -p './unixODBC/ODBCDataSources'
maybe chmod 0755 '.'
-maybe chmod 0644 './._cfg0000_dispatch-conf.conf'
maybe chmod 0700 './.etckeeper'
maybe chmod 0644 './.gitignore'
maybe chmod 0600 './.pwd.lock'
maybe chmod 0755 './config-archive/etc/conf.d'
maybe chmod 0644 './config-archive/etc/conf.d/ntpd'
maybe chmod 0644 './config-archive/etc/conf.d/ntpd.dist.new'
+maybe chmod 0644 './config-archive/etc/dispatch-conf.conf'
+maybe chmod 0644 './config-archive/etc/dispatch-conf.conf.dist.new'
maybe chmod 0755 './config-archive/etc/etckeeper'
maybe chmod 0644 './config-archive/etc/etckeeper/etckeeper.conf'
maybe chmod 0644 './config-archive/etc/etckeeper/etckeeper.conf.dist.new'
maybe chmod 0755 './config-archive/etc/portage/savedconfig/sys-apps'
maybe chmod 0644 './config-archive/etc/portage/savedconfig/sys-apps/busybox-1.19.3-r1'
maybe chmod 0644 './config-archive/etc/portage/savedconfig/sys-apps/busybox-1.19.3-r1.dist'
+maybe chmod 0755 './config-archive/etc/pulse'
+maybe chmod 0644 './config-archive/etc/pulse/default.pa'
+maybe chmod 0644 './config-archive/etc/pulse/default.pa.dist'
maybe chmod 0755 './config-archive/etc/ssh'
maybe chmod 0644 './config-archive/etc/ssh/ssh_config'
maybe chmod 0644 './config-archive/etc/ssh/ssh_config.dist'
maybe chmod 0644 './profile.env'
maybe chmod 0644 './protocols'
maybe chmod 0755 './pulse'
-maybe chmod 0644 './pulse/._cfg0000_default.pa'
maybe chmod 0644 './pulse/client.conf'
maybe chmod 0644 './pulse/daemon.conf'
maybe chmod 0644 './pulse/default.pa'
--- /dev/null
+#
+# dispatch-conf.conf
+#
+
+# Directory to archive replaced configs
+archive-dir=${EPREFIX}/etc/config-archive
+
+# Use rcs for storing files in the archive directory?
+# WARNING: When configured to use rcs, read and execute permissions of
+# archived files may be inherited from the first check in of a working
+# file, as documented in the ci(1) man page. This means that even if
+# the permissions of the working file have since changed, the older
+# permissions of the first check in may be inherited. As mentioned in
+# the ci(1) man page, users can control access to RCS files by setting
+# the permissions of the directory containing the files (see
+# archive-dir above).
+# (yes or no)
+use-rcs=no
+
+# Diff for display
+# %s old file
+# %s new file
+# If using colordiff instead of diff, the less -R option may be required
+# for correct display.
+#diff="diff -Nu '%s' '%s'"
+diff="diff -Nu '%s' '%s' | colordiff"
+
+# Set the pager for use with diff commands (this will
+# cause the PAGER environment variable to be ignored).
+# Setting pager="cat" will disable pager usage.
+pager=""
+
+# Default options used if less is the pager
+less-opts="--no-init --QUIT-AT-EOF"
+
+# Diff for interactive merges.
+# %s output file
+# %s old file
+# %s new file
+merge="sdiff --suppress-common-lines --output='%s' '%s' '%s'"
+
+# Automerge files comprising only CVS interpolations (e.g. Header or Id)
+# (yes or no)
+replace-cvs=yes
+
+# Automerge files comprising only whitespace and/or comments
+# (yes or no)
+replace-wscomments=yes
+
+# Automerge files that the user hasn't modified
+# (yes or no)
+replace-unmodified=yes
+
+# Ignore a version that is identical to the previously merged version,
+# even though it is different from the current user modified version
+# Note that emerge already has a similar feature enabled by default,
+# which can be disabled by the emerge --noconfmem option.
+# (yes or no)
+ignore-previously-merged=yes
+
+# Per-session log file of changes made to configuration files
+#log-file=/var/log/dispatch-conf.log
+
+# List of frozen files for which dispatch-conf will automatically zap updates
+#frozen-files=""
--- /dev/null
+#
+# dispatch-conf.conf
+#
+
+# Directory to archive replaced configs
+archive-dir=${EPREFIX}/etc/config-archive
+
+# Use rcs for storing files in the archive directory?
+# WARNING: When configured to use rcs, read and execute permissions of
+# archived files may be inherited from the first check in of a working
+# file, as documented in the ci(1) man page. This means that even if
+# the permissions of the working file have since changed, the older
+# permissions of the first check in may be inherited. As mentioned in
+# the ci(1) man page, users can control access to RCS files by setting
+# the permissions of the directory containing the files (see
+# archive-dir above).
+# (yes or no)
+use-rcs=no
+
+# Diff for display
+# %s old file
+# %s new file
+# If using colordiff instead of diff, the less -R option may be required
+# for correct display.
+diff="diff -Nu '%s' '%s'"
+
+# Set the pager for use with diff commands (this will
+# cause the PAGER environment variable to be ignored).
+# Setting pager="cat" will disable pager usage.
+pager=""
+
+# Default options used if less is the pager
+less-opts="--no-init --QUIT-AT-EOF"
+
+# Diff for interactive merges.
+# %s output file
+# %s old file
+# %s new file
+merge="sdiff --suppress-common-lines --output='%s' '%s' '%s'"
+
+# Automerge files comprising only CVS interpolations (e.g. Header or Id)
+# (yes or no)
+replace-cvs=yes
+
+# Automerge files comprising only whitespace and/or comments
+# (yes or no)
+replace-wscomments=no
+
+# Automerge files that the user hasn't modified
+# (yes or no)
+replace-unmodified=no
+
+# Ignore a version that is identical to the previously merged version,
+# even though it is different from the current user modified version
+# Note that emerge already has a similar feature enabled by default,
+# which can be disabled by the emerge --noconfmem option.
+# (yes or no)
+ignore-previously-merged=no
+
+# Per-session log file of changes made to configuration files
+#log-file=/var/log/dispatch-conf.log
+
+# List of frozen files for which dispatch-conf will automatically zap updates
+#frozen-files=""
--- /dev/null
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+# This startup script is used only if PulseAudio is started per-user
+# (i.e. not in system mode)
+
+.nofail
+
+### Load something into the sample cache
+#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
+#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
+#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
+#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
+
+.fail
+
+### Automatically restore the volume of streams and devices
+load-module module-device-restore
+load-module module-stream-restore
+load-module module-card-restore
+
+### Automatically augment property information from .desktop files
+### stored in /usr/share/application
+load-module module-augment-properties
+
+### Load audio drivers statically (it's probably better to not load
+### these drivers manually, but instead use module-hal-detect --
+### see below -- for doing this automatically)
+#load-module module-alsa-sink
+#load-module module-alsa-source device=hw:1,0
+#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
+#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
+#load-module module-null-sink
+#load-module module-pipe-sink
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect
+.else
+### Alternatively use the static hardware detection module (for systems that
+### lack udev support)
+load-module module-detect
+.endif
+
+### Automatically load driver modules for Bluetooth hardware
+.ifexists module-bluetooth-discover.so
+load-module module-bluetooth-discover
+.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+### Network access (may be configured with paprefs, so leave this commented
+### here if you plan to use paprefs)
+#load-module module-esound-protocol-tcp
+#load-module module-native-protocol-tcp
+#load-module module-zeroconf-publish
+
+### Load the RTP reciever module (also configured via paprefs, see above)
+#load-module module-rtp-recv
+
+### Load the RTP sender module (also configured via paprefs, see above)
+#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
+#load-module module-rtp-send source=rtp.monitor
+
+### Load additional modules from GConf settings. This can be configured with the paprefs tool.
+### Please keep in mind that the modules configured by paprefs might conflict with manually
+### loaded modules.
+.ifexists module-gconf.so
+.nofail
+load-module module-gconf
+.fail
+.endif
+
+### Automatically restore the default sink/source when changed by the user during runtime
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Honour intended role device property
+load-module module-intended-roles
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### If autoexit on idle is enabled we want to make sure we only quit
+### when no local session needs us anymore.
+load-module module-console-kit
+
+### Enable positioned event sounds
+load-module module-position-event-sounds
+
+### Cork music streams when a phone stream is active
+load-module module-cork-music-on-phone
+
+# X11 modules should not be started from default.pa so that one daemon
+# can be shared by multiple sessions.
+
+### Load X11 bell module
+#load-module module-x11-bell sample=bell-windowing-system
+
+### Register ourselves in the X11 session manager
+#load-module module-x11-xsmp
+
+### Publish connection data in the X11 root window
+#.ifexists module-x11-publish.so
+#.nofail
+#load-module module-x11-publish
+#.fail
+#.endif
+
+### Make some devices default
+#set-default-sink output
+#set-default-source input
--- /dev/null
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+# This startup script is used only if PulseAudio is started per-user
+# (i.e. not in system mode)
+
+.nofail
+
+### Load something into the sample cache
+#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
+#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
+#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
+#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
+
+.fail
+
+### Automatically restore the volume of streams and devices
+load-module module-device-restore
+load-module module-stream-restore
+load-module module-card-restore
+
+### Automatically augment property information from .desktop files
+### stored in /usr/share/application
+load-module module-augment-properties
+
+### Load audio drivers statically (it's probably better to not load
+### these drivers manually, but instead use module-hal-detect --
+### see below -- for doing this automatically)
+#load-module module-alsa-sink
+#load-module module-alsa-source device=hw:1,0
+#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
+#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
+#load-module module-null-sink
+#load-module module-pipe-sink
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect
+.else
+### Alternatively use the static hardware detection module (for systems that
+### lack udev support)
+load-module module-detect
+.endif
+
+### Automatically load driver modules for Bluetooth hardware
+.ifexists module-bluetooth-discover.so
+load-module module-bluetooth-discover
+.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+### Network access (may be configured with paprefs, so leave this commented
+### here if you plan to use paprefs)
+#load-module module-esound-protocol-tcp
+#load-module module-native-protocol-tcp
+load-module module-zeroconf-publish
+
+### Load the RTP reciever module (also configured via paprefs, see above)
+#load-module module-rtp-recv
+
+### Load the RTP sender module (also configured via paprefs, see above)
+#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
+#load-module module-rtp-send source=rtp.monitor
+
+### Load additional modules from GConf settings. This can be configured with the paprefs tool.
+### Please keep in mind that the modules configured by paprefs might conflict with manually
+### loaded modules.
+.ifexists module-gconf.so
+.nofail
+load-module module-gconf
+.fail
+.endif
+
+### Automatically restore the default sink/source when changed by the user during runtime
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Honour intended role device property
+load-module module-intended-roles
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### If autoexit on idle is enabled we want to make sure we only quit
+### when no local session needs us anymore.
+load-module module-console-kit
+
+### Enable positioned event sounds
+load-module module-position-event-sounds
+
+### Cork music streams when a phone stream is active
+load-module module-cork-music-on-phone
+
+# X11 modules should not be started from default.pa so that one daemon
+# can be shared by multiple sessions.
+
+### Load X11 bell module
+#load-module module-x11-bell sample=bell-windowing-system
+
+### Register ourselves in the X11 session manager
+#load-module module-x11-xsmp
+
+### Publish connection data in the X11 root window
+#.ifexists module-x11-publish.so
+#.nofail
+#load-module module-x11-publish
+#.fail
+#.endif
+
+### Make some devices default
+#set-default-sink output
+#set-default-source input
+++ /dev/null
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started per-user
-# (i.e. not in system mode)
-
-.nofail
-
-### Load something into the sample cache
-#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
-#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
-
-.fail
-
-### Automatically restore the volume of streams and devices
-load-module module-device-restore
-load-module module-stream-restore
-load-module module-card-restore
-
-### Automatically augment property information from .desktop files
-### stored in /usr/share/application
-load-module module-augment-properties
-
-### Load audio drivers statically (it's probably better to not load
-### these drivers manually, but instead use module-hal-detect --
-### see below -- for doing this automatically)
-#load-module module-alsa-sink
-#load-module module-alsa-source device=hw:1,0
-#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
-#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
-#load-module module-null-sink
-#load-module module-pipe-sink
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-udev-detect.so
-load-module module-udev-detect
-.else
-### Alternatively use the static hardware detection module (for systems that
-### lack udev support)
-load-module module-detect
-.endif
-
-### Automatically load driver modules for Bluetooth hardware
-.ifexists module-bluetooth-discover.so
-load-module module-bluetooth-discover
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Network access (may be configured with paprefs, so leave this commented
-### here if you plan to use paprefs)
-#load-module module-esound-protocol-tcp
-#load-module module-native-protocol-tcp
-load-module module-zeroconf-publish
-
-### Load the RTP reciever module (also configured via paprefs, see above)
-#load-module module-rtp-recv
-
-### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
-#load-module module-rtp-send source=rtp.monitor
-
-### Load additional modules from GConf settings. This can be configured with the paprefs tool.
-### Please keep in mind that the modules configured by paprefs might conflict with manually
-### loaded modules.
-.ifexists module-gconf.so
-.nofail
-load-module module-gconf
-.fail
-.endif
-
-### Automatically restore the default sink/source when changed by the user during runtime
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Honour intended role device property
-load-module module-intended-roles
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### If autoexit on idle is enabled we want to make sure we only quit
-### when no local session needs us anymore.
-load-module module-console-kit
-
-### Enable positioned event sounds
-load-module module-position-event-sounds
-
-### Cork music streams when a phone stream is active
-load-module module-cork-music-on-phone
-
-# X11 modules should not be started from default.pa so that one daemon
-# can be shared by multiple sessions.
-
-### Load X11 bell module
-#load-module module-x11-bell sample=bell-windowing-system
-
-### Register ourselves in the X11 session manager
-#load-module module-x11-xsmp
-
-### Publish connection data in the X11 root window
-#.ifexists module-x11-publish.so
-#.nofail
-#load-module module-x11-publish
-#.fail
-#.endif
-
-### Make some devices default
-#set-default-sink output
-#set-default-source input
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
-#load-module module-zeroconf-publish
+load-module module-zeroconf-publish
### Load the RTP reciever module (also configured via paprefs, see above)
#load-module module-rtp-recv
projects / config / bruni / etc.git / commitdiff