+++ /dev/null
-# Global OpenRC configuration settings
-
-# Set to "YES" if you want the rc system to try and start services
-# in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with its name as the output will get
-# jumbled up.
-# WARNING: whilst we have improved parallel, it can still potentially lock
-# the boot process. Don't file bugs about this unless you can supply
-# patches that fix it without breaking other things!
-#rc_parallel="NO"
-
-# Set rc_interactive to "YES" and you'll be able to press the I key during
-# boot so you can choose to start specific services. Set to "NO" to disable
-# this feature. This feature is automatically disabled if rc_parallel is
-# set to YES.
-#rc_interactive="YES"
-
-# If we need to drop to a shell, you can specify it here.
-# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
-# otherwise /bin/sh
-# Linux users could specify /sbin/sulogin
-rc_shell=/sbin/sulogin
-
-# Do we allow any started service in the runlevel to satisfy the dependency
-# or do we want all of them regardless of state? For example, if net.eth0
-# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
-# both will be started, but services that depend on 'net' will work if either
-# one comes up. With rc_depend_strict="YES" we would require them both to
-# come up.
-#rc_depend_strict="YES"
-
-# rc_hotplug is a list of services that we allow to be hotplugged.
-# By default we do not allow hotplugging.
-# A hotplugged service is one started by a dynamic dev manager when a matching
-# hardware device is found.
-# This service is intrinsically included in the boot runlevel.
-# To disable services, prefix with a !
-# Example - rc_hotplug="net.wlan !net.*"
-# This allows net.wlan and any service not matching net.* to be plugged.
-# Example - rc_hotplug="*"
-# This allows all services to be hotplugged
-#rc_hotplug="*"
-
-# rc_logger launches a logging daemon to log the entire rc process to
-# /var/log/rc.log
-# NOTE: Linux systems require the devfs service to be started before
-# logging can take place and as such cannot log the sysinit runlevel.
-#rc_logger="YES"
-
-# Through rc_log_path you can specify a custom log file.
-# The default value is: /var/log/rc.log
-#rc_log_path="/var/log/rc.log"
-
-# If you want verbose output for OpenRC, set this to yes. If you want
-# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
-#rc_verbose=no
-
-# By default we filter the environment for our running scripts. To allow other
-# variables through, add them here. Use a * to allow all variables through.
-#rc_env_allow="VAR1 VAR2"
-
-# By default we assume that all daemons will start correctly.
-# However, some do not - a classic example is that they fork and return 0 AND
-# then child barfs on a configuration error. Or the daemon has a bug and the
-# child crashes. You can set the number of milliseconds start-stop-daemon
-# waits to check that the daemon is still running after starting here.
-# The default is 0 - no checking.
-#rc_start_wait=100
-
-# rc_nostop is a list of services which will not stop when changing runlevels.
-# This still allows the service itself to be stopped when called directly.
-#rc_nostop=""
-
-# rc will attempt to start crashed services by default.
-# However, it will not stop them by default as that could bring down other
-# critical services.
-#rc_crashed_stop=NO
-#rc_crashed_start=YES
-
-# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
-# output.
-#rc_nocolor=NO
-
-##############################################################################
-# MISC CONFIGURATION VARIABLES
-# There variables are shared between many init scripts
-
-# Set unicode to YES to turn on unicode support for keyboards and screens.
-unicode="YES"
-
-# This is how long fuser should wait for a remote server to respond. The
-# default is 60 seconds, but it can be adjusted here.
-#rc_fuser_timeout=60
-
-# Below is the default list of network fstypes.
-#
-# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
-# nfs nfs4 ocfs2 shfs smbfs
-#
-# If you would like to add to this list, you can do so by adding your
-# own fstypes to the following variable.
-#extra_net_fs_list=""
-
-##############################################################################
-# SERVICE CONFIGURATION VARIABLES
-# These variables are documented here, but should be configured in
-# /etc/conf.d/foo for service foo and NOT enabled here unless you
-# really want them to work on a global basis.
-# If your service has characters in its name which are not legal in
-# shell variable names and you configure the variables for it in this
-# file, those characters should be replaced with underscores in the
-# variable names as shown below.
-
-# Some daemons are started and stopped via start-stop-daemon.
-# We can set some things on a per service basis, like the nicelevel.
-#SSD_NICELEVEL="-19"
-
-# Pass ulimit parameters
-# If you are using bash in POSIX mode for your shell, note that the
-# ulimit command uses a block size of 512 bytes for the -c and -f
-# options
-#rc_ulimit="-u 30"
-
-# It's possible to define extra dependencies for services like so
-#rc_config="/etc/foo"
-#rc_need="openvpn"
-#rc_use="net.eth0"
-#rc_after="clock"
-#rc_before="local"
-#rc_provide="!net"
-
-# You can also enable the above commands here for each service. Below is an
-# example for service foo.
-#rc_foo_config="/etc/foo"
-#rc_foo_need="openvpn"
-#rc_foo_after="clock"
-
-# Below is an example for service foo-bar. Note that the '-' is illegal
-# in a shell variable name, so we convert it to an underscore.
-# example for service foo-bar.
-#rc_foo_bar_config="/etc/foo-bar"
-#rc_foo_bar_need="openvpn"
-#rc_foo_bar_after="clock"
-
-# You can also remove dependencies.
-# This is mainly used for saying which servies do NOT provide net.
-#rc_net_tap0_provide="!net"
-
-##############################################################################
-# LINUX SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on Linux:
-# "" - nothing special
-# "lxc" - Linux Containers
-# "openvz" - Linux OpenVZ
-# "prefix" - Prefix
-# "uml" - Usermode Linux
-# "vserver" - Linux vserver
-# "systemd-nspawn" - Container created by the systemd-nspawn utility
-# "xen0" - Xen0 Domain
-# "xenU" - XenU Domain
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
-rc_tty_number=12
-
-##############################################################################
-# CGROUPS RESOURCE MANAGEMENT
-
-# If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controller is mounted under
-# /sys/fs/cgroup.
-# None of the other options in this section work if this is set to "NO".
-#rc_controller_cgroups="YES"
-
-# The following settings allow you to set up values for the cgroup
-# controllers for your services.
-# They can be set in this file;, however, if you do this, the settings
-# will apply to all of your services.
-# If you want different settings for each service, place the settings in
-# /etc/conf.d/foo for service foo.
-# The format is to specify the names of the settings followed by their
-# values. Each variable can hold multiple settings.
-# For example, you would use this to set the cpu.shares setting in the
-# cpu controller to 512 for your service.
-# rc_cgroup_cpu="
-# cpu.shares 512
-# "
-#
-#For more information about the adjustments that can be made with
-#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
-
-# Set the blkio controller settings for this service.
-#rc_cgroup_blkio=""
-
-# Set the cpu controller settings for this service.
-#rc_cgroup_cpu=""
-
-# Add this service to the cpuacct controller (any value means yes).
-#rc_cgroup_cpuacct=""
-
-# Set the cpuset controller settings for this service.
-#rc_cgroup_cpuset=""
-
-# Set the devices controller settings for this service.
-#rc_cgroup_devices=""
-
-# Set the hugetlb controller settings for this service.
-#rc_cgroup_hugetlb=""
-
-# Set the memory controller settings for this service.
-#rc_cgroup_memory=""
-
-# Set the net_cls controller settings for this service.
-#rc_cgroup_net_cls=""
-
-# Set the net_prio controller settings for this service.
-#rc_cgroup_net_prio=""
-
-# Set the pids controller settings for this service.
-#rc_cgroup_pids=""
-
-# Set this to YES if yu want all of the processes in a service's cgroup
-# killed when the service is stopped or restarted.
-# This should not be set globally because it kills all of the service's
-# child processes, and most of the time this is undesirable. Please set
-# it in /etc/conf.d/<service>.
-# To perform this cleanup manually for a stopped service, you can
-# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
-# rc-service <service> cgroup_cleanup.
-# rc_cgroup_cleanup="NO"
mkdir -p './udev/hwdb.d'
mkdir -p './unixODBC/ODBCDataSources'
maybe chmod 0755 '.'
-maybe chmod 0644 '._cfg0000_rc.conf'
maybe chmod 0700 '.etckeeper'
maybe chmod 0644 '.gitignore'
maybe chmod 0644 'DIR_COLORS'
maybe chmod 0644 'config-archive/etc/rc.conf.2'
maybe chmod 0644 'config-archive/etc/rc.conf.3'
maybe chmod 0644 'config-archive/etc/rc.conf.4'
+maybe chmod 0644 'config-archive/etc/rc.conf.5'
maybe chmod 0644 'config-archive/etc/rc.conf.dist'
maybe chmod 0644 'config-archive/etc/request-key.conf'
maybe chmod 0644 'config-archive/etc/request-key.conf.dist'
#SSD_NICELEVEL="-19"
# Pass ulimit parameters
+# If you are using bash in POSIX mode for your shell, note that the
+# ulimit command uses a block size of 512 bytes for the -c and -f
+# options
#rc_ulimit="-u 30"
# It's possible to define extra dependencies for services like so
# LINUX SPECIFIC OPTIONS
# This is the subsystem type. Valid options on Linux:
-# "" - nothing special
-# "lxc" - Linux Containers
-# "openvz" - Linux OpenVZ
-# "prefix" - Prefix
-# "uml" - Usermode Linux
-# "vserver" - Linux vserver
-# "xen0" - Xen0 Domain
-# "xenU" - XenU Domain
+# "" - nothing special
+# "lxc" - Linux Containers
+# "openvz" - Linux OpenVZ
+# "prefix" - Prefix
+# "uml" - Usermode Linux
+# "vserver" - Linux vserver
+# "systemd-nspawn" - Container created by the systemd-nspawn utility
+# "xen0" - Xen0 Domain
+# "xenU" - XenU Domain
# If this is commented out, automatic detection will be used.
#
# This should be set to the value representing the environment this file is
# The default value is: /var/log/rc.log
rc_log_path="/var/log/rc.log"
+# If you want verbose output for OpenRC, set this to yes. If you want
+# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
+#rc_verbose=no
+
# By default we filter the environment for our running scripts. To allow other
# variables through, add them here. Use a * to allow all variables through.
#rc_env_allow="VAR1 VAR2"
#rc_crashed_stop=NO
#rc_crashed_start=YES
+# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
+# output.
+#rc_nocolor=NO
+
##############################################################################
# MISC CONFIGURATION VARIABLES
# There variables are shared between many init scripts
# Below is the default list of network fstypes.
#
-# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
# nfs nfs4 ocfs2 shfs smbfs
#
# If you would like to add to this list, you can do so by adding your
# Set unicode to YES to turn on unicode support for keyboards and screens.
unicode="YES"
+# This is how long fuser should wait for a remote server to respond. The
+# default is 60 seconds, but it can be adjusted here.
+#rc_fuser_timeout=60
+
# Below is the default list of network fstypes.
#
# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
-#export SSD_NICELEVEL="-19"
+#SSD_NICELEVEL="-19"
# Pass ulimit parameters
#rc_ulimit="-u 30"
# consolefont, numlock, etc ...)
rc_tty_number=12
+##############################################################################
+# CGROUPS RESOURCE MANAGEMENT
+
# If you have cgroups turned on in your kernel, this switch controls
# whether or not a group for each controller is mounted under
# /sys/fs/cgroup.
-# Support for process management by cgroups is planned in the future,
-# so if you turn this off, be aware that you may not be able to use that
-# feature.
+# None of the other options in this section work if this is set to "NO".
#rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroup
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+#For more information about the adjustments that can be made with
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set this to YES if yu want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# This should not be set globally because it kills all of the service's
+# child processes, and most of the time this is undesirable. Please set
+# it in /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# rc_cgroup_cleanup="NO"
rc_tty_number=12
# If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controler is mounted under
+# whether or not a group for each controller is mounted under
# /sys/fs/cgroup.
# Support for process management by cgroups is planned in the future,
# so if you turn this off, be aware that you may not be able to use that
# These variables are documented here, but should be configured in
# /etc/conf.d/foo for service foo and NOT enabled here unless you
# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
#rc_foo_need="openvpn"
#rc_foo_after="clock"
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
# You can also remove dependencies.
# This is mainly used for saying which servies do NOT provide net.
#rc_net_tap0_provide="!net"
# "vserver" - Linux vserver
# "xen0" - Xen0 Domain
# "xenU" - XenU Domain
-# If this is commented out, automatic detection will be attempted.
-# Note that autodetection will not work in a prefix environment or in a
-# linux container.
+# If this is commented out, automatic detection will be used.
#
# This should be set to the value representing the environment this file is
# PRESENTLY in, not the virtualization the environment is capable of.
# consolefont, numlock, etc ...)
rc_tty_number=12
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controler is mounted under
+# /sys/fs/cgroup.
+# Support for process management by cgroups is planned in the future,
+# so if you turn this off, be aware that you may not be able to use that
+# feature.
+#rc_controller_cgroups="YES"
--- /dev/null
+# Global OpenRC configuration settings
+
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with its name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
+rc_parallel="YES"
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
+#rc_interactive="YES"
+rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+rc_shell=/sbin/sulogin
+
+# Do we allow any started service in the runlevel to satisfy the dependency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+#rc_depend_strict="YES"
+
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be plugged.
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+rc_logger="YES"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+rc_log_path="/var/log/rc.log"
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+unicode="YES"
+
+# Below is the default list of network fstypes.
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#export SSD_NICELEVEL="-19"
+
+# Pass ulimit parameters
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which servies do NOT provide net.
+#rc_net_tap0_provide="!net"
+
+##############################################################################
+# LINUX SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on Linux:
+# "" - nothing special
+# "lxc" - Linux Containers
+# "openvz" - Linux OpenVZ
+# "prefix" - Prefix
+# "uml" - Usermode Linux
+# "vserver" - Linux vserver
+# "xen0" - Xen0 Domain
+# "xenU" - XenU Domain
+# If this is commented out, automatic detection will be attempted.
+# Note that autodetection will not work in a prefix environment or in a
+# linux container.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+rc_sys=""
+
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+rc_tty_number=12
+
# Set the devices controller settings for this service.
#rc_cgroup_devices=""
+# Set the hugetlb controller settings for this service.
+#rc_cgroup_hugetlb=""
+
# Set the memory controller settings for this service.
#rc_cgroup_memory=""
+# Set the net_cls controller settings for this service.
+#rc_cgroup_net_cls=""
+
# Set the net_prio controller settings for this service.
#rc_cgroup_net_prio=""
+# Set the pids controller settings for this service.
+#rc_cgroup_pids=""
+
# Set this to YES if yu want all of the processes in a service's cgroup
# killed when the service is stopped or restarted.
# This should not be set globally because it kills all of the service's
# Set the devices controller settings for this service.
#rc_cgroup_devices=""
+# Set the hugetlb controller settings for this service.
+#rc_cgroup_hugetlb=""
+
# Set the memory controller settings for this service.
#rc_cgroup_memory=""
+# Set the net_cls controller settings for this service.
+#rc_cgroup_net_cls=""
+
# Set the net_prio controller settings for this service.
#rc_cgroup_net_prio=""
+# Set the pids controller settings for this service.
+#rc_cgroup_pids=""
+
# Set this to YES if yu want all of the processes in a service's cgroup
# killed when the service is stopped or restarted.
# This should not be set globally because it kills all of the service's
projects / config / uhu1 / etc.git / commitdiff