# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.
+# COMPATIBILITY
+#
+# The compatibility_level determines what default settings Postfix
+# will use for main.cf and master.cf settings. These defaults will
+# change over time.
+#
+# To avoid breaking things, Postfix will use backwards-compatible
+# default settings and log where it uses those old backwards-compatible
+# default settings, until the system administrator has determined
+# if any backwards-compatible default settings need to be made
+# permanent in main.cf or master.cf.
+#
+# When this review is complete, update the compatibility_level setting
+# below as recommended in the RELEASE_NOTES file.
+#
+# The level below is what should be used with new (not upgrade) installs.
+#
+#compatibility_level = 2
+
# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.11.3/html
+html_directory = /usr/share/doc/postfix-3.0.0/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.11.3/readme
+readme_directory = /usr/share/doc/postfix-3.0.0/readme
+meta_directory = /etc/postfix
+shlib_directory = /usr/lib64/postfix/${mail_version}
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# For common configuration examples, see BASIC_CONFIGURATION_README
# and STANDARD_CONFIGURATION_README. To find these documents, use
# the command "postconf html_directory readme_directory", or go to
-# http://www.postfix.org/.
+# http://www.postfix.org/BASIC_CONFIGURATION_README.html etc.
#
# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.3/html
+html_directory = /usr/share/doc/postfix-2.11.3/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.3/readme
+readme_directory = /usr/share/doc/postfix-2.11.3/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.2/html
+html_directory = /usr/share/doc/postfix-2.10.3/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.2/readme
+readme_directory = /usr/share/doc/postfix-2.10.3/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.1/html
+html_directory = /usr/share/doc/postfix-2.10.2/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.1/readme
+readme_directory = /usr/share/doc/postfix-2.10.2/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.0/html
+html_directory = /usr/share/doc/postfix-2.10.1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.0/readme
+readme_directory = /usr/share/doc/postfix-2.10.1/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.5/html
+html_directory = /usr/share/doc/postfix-2.10.0/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.5/readme
+readme_directory = /usr/share/doc/postfix-2.10.0/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.4/html
+html_directory = /usr/share/doc/postfix-2.9.5/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.4/readme
+readme_directory = /usr/share/doc/postfix-2.9.5/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
-smtpd_sasl2_auth_enable = yes
+#smtpd_sasl2_auth_enable = yes
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes
smtpd_sasl_local_domain = $myhostname
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.3/html
+html_directory = /usr/share/doc/postfix-2.9.4/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.3/readme
+readme_directory = /usr/share/doc/postfix-2.9.4/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
-daemon_directory = /usr/lib64/postfix
+daemon_directory = /usr/libexec/postfix
# The data_directory parameter specifies the location of Postfix-writable
# data files (caches, random numbers). This directory must be owned
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
-#mailbox_transport = lmtp:unix:/file/name
+# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd"
+# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf.
+#mailbox_transport = lmtp:unix:/var/imap/socket/lmtp
+#
+# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and
+# subsequent line in master.cf.
#mailbox_transport = cyrus
# The fallback_transport specifies the optional transport in master.cf
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.8.9/html
+html_directory = /usr/share/doc/postfix-2.9.3/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.8.9/readme
+readme_directory = /usr/share/doc/postfix-2.9.3/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.8.7/html
+html_directory = /usr/share/doc/postfix-2.8.9/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.8.7/readme
+readme_directory = /usr/share/doc/postfix-2.8.9/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-3.0.0/html
+html_directory = /usr/share/doc/postfix-3.0.1-r1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-3.0.0/readme
+readme_directory = /usr/share/doc/postfix-3.0.1-r1/readme
inet_protocols = ipv4
meta_directory = /etc/postfix
shlib_directory = /usr/lib64/postfix/${mail_version}
# The default value is: /var/log/rc.log
rc_log_path="/var/log/rc.log"
+# If you want verbose output for OpenRC, set this to yes. If you want
+# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
+#rc_verbose=no
+
# By default we filter the environment for our running scripts. To allow other
# variables through, add them here. Use a * to allow all variables through.
#rc_env_allow="VAR1 VAR2"
#rc_crashed_stop=NO
#rc_crashed_start=YES
+# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
+# output.
+#rc_nocolor=NO
+
##############################################################################
# MISC CONFIGURATION VARIABLES
# There variables are shared between many init scripts
# Below is the default list of network fstypes.
#
-# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
# nfs nfs4 ocfs2 shfs smbfs
#
# If you would like to add to this list, you can do so by adding your
# WARNING: whilst we have improved parallel, it can still potentially lock
# the boot process. Don't file bugs about this unless you can supply
# patches that fix it without breaking other things!
-#rc_parallel="NO"
-rc_parallel="YES"
+rc_parallel="NO"
+#rc_parallel="YES"
# Set rc_interactive to "YES" and you'll be able to press the I key during
# boot so you can choose to start specific services. Set to "NO" to disable
# Set unicode to YES to turn on unicode support for keyboards and screens.
unicode="YES"
+# This is how long fuser should wait for a remote server to respond. The
+# default is 60 seconds, but it can be adjusted here.
+#rc_fuser_timeout=60
+
# Below is the default list of network fstypes.
#
# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
-#export SSD_NICELEVEL="-19"
+#SSD_NICELEVEL="-19"
# Pass ulimit parameters
#rc_ulimit="-u 30"
#rc_foo_bar_need="openvpn"
#rc_foo_bar_after="clock"
+rc_local_after="mta"
+
# You can also remove dependencies.
# This is mainly used for saying which servies do NOT provide net.
#rc_net_tap0_provide="!net"
# consolefont, numlock, etc ...)
rc_tty_number=12
+##############################################################################
+# CGROUPS RESOURCE MANAGEMENT
+
# If you have cgroups turned on in your kernel, this switch controls
# whether or not a group for each controller is mounted under
# /sys/fs/cgroup.
-# Support for process management by cgroups is planned in the future,
-# so if you turn this off, be aware that you may not be able to use that
-# feature.
+# None of the other options in this section work if this is set to "NO".
#rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroup
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+#For more information about the adjustments that can be made with
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set this to YES if yu want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# This should not be set globally because it kills all of the service's
+# child processes, and most of the time this is undesirable. Please set
+# it in /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# rc_cgroup_cleanup="NO"
rc_tty_number=12
# If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controler is mounted under
+# whether or not a group for each controller is mounted under
# /sys/fs/cgroup.
# Support for process management by cgroups is planned in the future,
# so if you turn this off, be aware that you may not be able to use that
# These variables are documented here, but should be configured in
# /etc/conf.d/foo for service foo and NOT enabled here unless you
# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
#rc_foo_need="openvpn"
#rc_foo_after="clock"
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
# You can also remove dependencies.
# This is mainly used for saying which servies do NOT provide net.
#rc_net_tap0_provide="!net"
# "vserver" - Linux vserver
# "xen0" - Xen0 Domain
# "xenU" - XenU Domain
-# If this is commented out, automatic detection will be attempted.
-# Note that autodetection will not work in a prefix environment or in a
-# linux container.
+# If this is commented out, automatic detection will be used.
#
# This should be set to the value representing the environment this file is
# PRESENTLY in, not the virtualization the environment is capable of.
# consolefont, numlock, etc ...)
rc_tty_number=12
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controler is mounted under
+# /sys/fs/cgroup.
+# Support for process management by cgroups is planned in the future,
+# so if you turn this off, be aware that you may not be able to use that
+# feature.
+#rc_controller_cgroups="YES"
--- /dev/null
+# Global OpenRC configuration settings
+
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with its name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
+rc_parallel="YES"
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
+#rc_interactive="YES"
+rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+rc_shell=/sbin/sulogin
+
+# Do we allow any started service in the runlevel to satisfy the dependency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+#rc_depend_strict="YES"
+
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be plugged.
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+rc_logger="YES"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+rc_log_path="/var/log/rc.log"
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+unicode="YES"
+
+# Below is the default list of network fstypes.
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#export SSD_NICELEVEL="-19"
+
+# Pass ulimit parameters
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which servies do NOT provide net.
+#rc_net_tap0_provide="!net"
+
+##############################################################################
+# LINUX SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on Linux:
+# "" - nothing special
+# "lxc" - Linux Containers
+# "openvz" - Linux OpenVZ
+# "prefix" - Prefix
+# "uml" - Usermode Linux
+# "vserver" - Linux vserver
+# "xen0" - Xen0 Domain
+# "xenU" - XenU Domain
+# If this is commented out, automatic detection will be attempted.
+# Note that autodetection will not work in a prefix environment or in a
+# linux container.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+rc_sys=""
+
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+rc_tty_number=12
+
#SSD_NICELEVEL="-19"
# Pass ulimit parameters
+# If you are using bash in POSIX mode for your shell, note that the
+# ulimit command uses a block size of 512 bytes for the -c and -f
+# options
#rc_ulimit="-u 30"
# It's possible to define extra dependencies for services like so
# LINUX SPECIFIC OPTIONS
# This is the subsystem type. Valid options on Linux:
-# "" - nothing special
-# "lxc" - Linux Containers
-# "openvz" - Linux OpenVZ
-# "prefix" - Prefix
-# "uml" - Usermode Linux
-# "vserver" - Linux vserver
-# "xen0" - Xen0 Domain
-# "xenU" - XenU Domain
+# "" - nothing special
+# "lxc" - Linux Containers
+# "openvz" - Linux OpenVZ
+# "prefix" - Prefix
+# "uml" - Usermode Linux
+# "vserver" - Linux vserver
+# "systemd-nspawn" - Container created by the systemd-nspawn utility
+# "xen0" - Xen0 Domain
+# "xenU" - XenU Domain
# If this is commented out, automatic detection will be used.
#
# This should be set to the value representing the environment this file is
# Random seed for forging saved session types, etc. of unknown users.
# This value should be random but constant across the login domain.
# Default is 0
-ForgingSeed=1418469430
+ForgingSeed=1434435070
# Specify conversation plugins for the login dialog. Each plugin can be
# specified as a base name (which expands to $kde_modulesdir/kgreet_$base)
# or as a full pathname.
-##VERSION: $Id: authdaemonrc.in 239 2012-10-06 23:51:19Z mrsam $
+##VERSION: $Id: 2013-08-20 21:38:40 -0400 0404e6724c4edec3859842fb06d86c3ad52e8cc2$
#
# Copyright 2000-2005 Double Precision, Inc. See COPYING for
# distribution information.
-##VERSION: $Id: authdaemonrc.in 239 2012-10-06 23:51:19Z mrsam $
+##VERSION: $Id: 2013-08-20 21:38:40 -0400 0404e6724c4edec3859842fb06d86c3ad52e8cc2$
#
# Copyright 2000-2005 Double Precision, Inc. See COPYING for
# distribution information.
-##VERSION: $Id: authldaprc 17 2011-04-04 02:07:37Z mrsam $
+##VERSION: $Id: authldaprc 265 2013-02-25 03:49:33Z mrsam $
#
# Copyright 2000-2004 Double Precision, Inc. See COPYING for
# distribution information.
#
# LDAP_AUTHBIND 1
+##NAME: LDAP_INITBIND:1
+#
+# Define this to do an initial bind to the adminstrator DN set in LDAP_BINDDN.
+# If your LDAP server allows access without a bind, or you want to authenticate
+# using a rebind (and have set LDAP_AUTHBIND to 1, you can set this to 0 and
+# need not write the LDAP-Admin passwort into this file.
+#
+LDAP_INITBIND 1
+
##NAME: LDAP_MAIL:0
#
# Here's the field on which we query
-##VERSION: $Id: authldaprc 17 2011-04-04 02:07:37Z mrsam $
+##VERSION: $Id: authldaprc 265 2013-02-25 03:49:33Z mrsam $
#
# Copyright 2000-2004 Double Precision, Inc. See COPYING for
# distribution information.
#
# LDAP_AUTHBIND 1
+##NAME: LDAP_INITBIND:1
+#
+# Define this to do an initial bind to the adminstrator DN set in LDAP_BINDDN.
+# If your LDAP server allows access without a bind, or you want to authenticate
+# using a rebind (and have set LDAP_AUTHBIND to 1, you can set this to 0 and
+# need not write the LDAP-Admin passwort into this file.
+#
+LDAP_INITBIND 1
+
##NAME: LDAP_MAIL:0
#
# Here's the field on which we query
setenv ANT_HOME '/usr/share/ant'
setenv CONFIG_PROTECT '/var/bind /usr/share/gnupg/qualified.txt /var/lib/hsqldb /usr/share/config /usr/lib64/libreoffice/program/sofficerc'
-setenv CONFIG_PROTECT_MASK '/etc/gentoo-release /etc/sandbox.d /etc/php/cli-php5.5/ext-active/ /etc/php/cgi-php5.5/ext-active/ /etc/php/apache2-php5.5/ext-active/ /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
+setenv CONFIG_PROTECT_MASK '/etc/gentoo-release /etc/sandbox.d /etc/php/cli-php5.6/ext-active/ /etc/php/cgi-php5.6/ext-active/ /etc/php/apache2-php5.6/ext-active/ /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
setenv CVS_RSH 'ssh'
setenv EDITOR '/usr/bin/vim'
setenv FLTK_DOCDIR '/usr/share/doc/fltk-1.3.2/html'
setenv LESS '-R -M --shift 5'
setenv LESSOPEN '|lesspipe %s'
setenv LIBBLURAY_CP '/usr/share/libbluray/lib/libbluray.jar'
-setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.5/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.4/man/'
+setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.6/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.4/man/'
setenv MULTIOSDIRS '../lib64:../lib32'
setenv OPENGL_PROFILE 'xorg-x11'
setenv PAGER '/usr/bin/less'
#clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
+# Some non-RFC compliant DHCP servers do not reply with this set.
+# In this case, comment out duid and enable clientid above.
duid
# Persist interface configuration when dhcpcd exits.
+++ /dev/null
-MANPATH="/usr/lib64/php5.5/man/"
-CONFIG_PROTECT_MASK="/etc/php/cli-php5.5/ext-active/ /etc/php/cgi-php5.5/ext-active/ /etc/php/apache2-php5.5/ext-active/"
--- /dev/null
+MANPATH="/usr/lib64/php5.6/man/"
+CONFIG_PROTECT_MASK="/etc/php/cli-php5.6/ext-active/ /etc/php/cgi-php5.6/ext-active/ /etc/php/apache2-php5.6/ext-active/"
+++ /dev/null
-LDPATH="/usr/lib64/qt4:/usr/lib32/qt4:/usr/lib/qt4"
--- /dev/null
+LDPATH="/usr/lib32/qt4"
--- /dev/null
+LDPATH="/usr/lib64/qt4"
-postgres_ebuilds="${postgres_ebuilds} postgresql-9.4.1"
+postgres_ebuilds="${postgres_ebuilds} postgresql-9.4.3"
</local_schema>
</entry>
<entry name="enabled">
- <local_schema short_desc="Legt fest, ob das angegebene Kommando „sip“-URLs verarbeiten soll">
+ <local_schema short_desc="Legt fest, ob der angegebene Befehl „sip“-URLs verarbeiten soll">
<longdesc>Aktivieren, wenn der Befehl, der im „command“-Schlüssel angegeben ist, „sip“-URLs verarbeiten soll.</longdesc>
</local_schema>
</entry>
</local_schema>
</entry>
<entry name="enabled">
- <local_schema short_desc="Legt fest, ob das angegebene Kommando „msnim“-URLs verarbeiten soll">
+ <local_schema short_desc="Legt fest, ob der angegebene Befehl „msnim“-URLs verarbeiten soll">
<longdesc>Aktivieren, wenn der Befehl, der im „command“-Schlüssel angegeben ist, „msnim“-URLs verarbeiten soll.</longdesc>
</local_schema>
</entry>
</local_schema>
</entry>
<entry name="enabled">
- <local_schema short_desc="Legt fest, ob das angegebene Kommando „irc“-URLs verarbeiten soll">
+ <local_schema short_desc="Legt fest, ob der angegebene Befehl „irc“-URLs verarbeiten soll">
<longdesc>Aktivieren, wenn der Befehl, der im „command“-Schlüssel angegeben ist, „irc“-URLs verarbeiten soll.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="aim">
<entry name="needs_terminal">
- <local_schema short_desc="Den Befehl in einem Terminal ausführen">
- <longdesc>Falls dieser Schlüssel wahr ist, wird das Programm, dass diesen URL-Typ handhaben soll, in einem Terminal ausgeführt.</longdesc>
+ <local_schema short_desc="Befehl in einem Terminal ausführen">
+ <longdesc>Aktivieren, wenn der Befehl, der benutzt wird um diese Art von URL zu verarbeiten, in einem Terminal ausgeführt werden soll.</longdesc>
</local_schema>
</entry>
<entry name="command">
- <local_schema short_desc="Der Handler für »aim«-URLs">
- <longdesc>Der zum Handhaben von »aim«-URLs verwendete Befehl, falls aktiviert.</longdesc>
+ <local_schema short_desc="Behandlungsroutine für „aim“-URLs">
+ <longdesc>Der Befehl, der „aim“-URLs verarbeitet, wenn aktiviert.</longdesc>
</local_schema>
</entry>
<entry name="enabled">
- <local_schema short_desc="Soll der angegebene Befehl »aim«-URLs handhaben?">
- <longdesc>Falls dieser Schlüssel wahr ist, handhabt das in »command« angegebene Programm »aim«-URLs.</longdesc>
+ <local_schema short_desc="Legt fest, ob dar angegebene Befehl „aim“-URLs verarbeiten soll">
+ <longdesc>Aktivieren, wenn der Befehl, der im „command“-Schlüssel angegeben ist, „aim“-URLs verarbeiten soll.</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="aim">
<entry name="needs_terminal">
- <local_schema short_desc="Ð\97апÑ\83Ñ\81каÑ\82Ñ\8c пÑ\80огÑ\80амму в терминале">
- <longdesc>Ð\95Ñ\81ли Ñ\8dÑ\82оÑ\82 клÑ\8eÑ\87 Ñ\83Ñ\81Ñ\82ановлен, Ñ\82о пÑ\80огÑ\80амма,опÑ\80еделÑ\91ннаÑ\8f длÑ\8f обÑ\80абоÑ\82ки Ñ\81Ñ\81Ñ\8bлки (URL), бÑ\83деÑ\82 запÑ\83Ñ\81каÑ\82Ñ\8cÑ\81Ñ\8f в терминале.</longdesc>
+ <local_schema short_desc="Ð\92Ñ\8bполниÑ\82Ñ\8c команду в терминале">
+ <longdesc>Ð\92еÑ\80но, еÑ\81ли команда, иÑ\81полÑ\8cзÑ\83Ñ\8eÑ\89аÑ\8fÑ\81Ñ\8f длÑ\8f обÑ\80аÑ\89ениÑ\8f по Ñ\81Ñ\81Ñ\8bлке Ñ\82акого Ñ\82ипа, должна бÑ\8bÑ\82Ñ\8c запÑ\83Ñ\89ена в терминале.</longdesc>
</local_schema>
</entry>
<entry name="command">
- <local_schema short_desc="Обработчик URL типа "aim"">
- <longdesc>Команда, используемая для обработки URL типа "aim", если ключ установлен</longdesc>
+ <local_schema short_desc="Обработчик для "aim" URL">
+ <longdesc>Команда, используемая для обработки "aim" URL, если включено.</longdesc>
</local_schema>
</entry>
<entry name="enabled">
- <local_schema short_desc="Ð\91Ñ\83деÑ\82 ли Ñ\83казаннаÑ\8f команда обÑ\80абаÑ\82Ñ\8bваÑ\82Ñ\8c Ñ\81Ñ\81Ñ\8bлки (URL) Ñ\82ипа "aim"">
- <longdesc>Ð\95Ñ\81ли Ñ\8dÑ\82оÑ\82 клÑ\8eÑ\87 Ñ\83Ñ\81Ñ\82ановлен, Ñ\82о пÑ\80огÑ\80амма, опÑ\80еделÑ\91ннаÑ\8f в клÑ\8eÑ\87е "command", бÑ\83деÑ\82 обÑ\80абаÑ\82Ñ\8bваÑ\82Ñ\8c Ñ\81Ñ\81Ñ\8bлки (URL) Ñ\82ипа "aim".</longdesc>
+ <local_schema short_desc="Ð\94олжна ли Ñ\83казаннаÑ\8f команда обÑ\80абаÑ\82Ñ\8bваÑ\82Ñ\8c "aim" URL">
+ <longdesc>Ð\92еÑ\80но, еÑ\81ли команде, обÑ\8aÑ\8fвленной в клÑ\8eÑ\87е "command", нÑ\83жно обÑ\80аÑ\89аÑ\82Ñ\8cÑ\81Ñ\8f по "aim" адÑ\80еÑ\81ам.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="aim">
<entry name="needs_terminal">
<local_schema short_desc="Chạy lệnh trong thiết bị cuối">
- <longdesc>Đúng nếu lệnh được dùng để xử lý URL kiểu này nên được dùng trong thiết bị cuối.</longdesc>
+ <longdesc>Đúng nếu lệnh được dùng để quản lý địa chỉ URL kiểu này nên được chạy trong thiết bị cuối.</longdesc>
</local_schema>
</entry>
<entry name="command">
- <local_schema short_desc="Bộ xử lý cho URL « aim »">
- <longdesc>Lệnh được dùng để xử lý các URL kiểu « aim », nếu bật.</longdesc>
+ <local_schema short_desc="Bộ quản lý địa chỉ URL « aim »">
+ <longdesc>Lệnh dùng để quản lý địa chỉ URL « aim », nếu bật.</longdesc>
</local_schema>
</entry>
<entry name="enabled">
- <local_schema short_desc="Lệnh được xác định có nên xử lý URL « aim » hay không">
- <longdesc>Đúng nếu lệnh được xác định trong khóa « lệnh » nên xử lý các URL « aim ».</longdesc>
+ <local_schema short_desc="Lệnh đã ghi rõ có nên quản lý địa chỉ URL kiểu « aim » hay không">
+ <longdesc>Đúng nếu lệnh được ghi rõ trong koá « command » nên quản lý địa chỉ URL kiểu « aim ».</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="url-handlers">
<dir name="ymsgr">
- <entry name="needs_terminal" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/ymsgr/needs_terminal"/>
- <entry name="command" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/ymsgr/command"/>
- <entry name="enabled" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/ymsgr/enabled"/>
+ <entry name="needs_terminal" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/ymsgr/needs_terminal"/>
+ <entry name="command" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/ymsgr/command"/>
+ <entry name="enabled" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/ymsgr/enabled"/>
</dir>
<dir name="xmpp">
- <entry name="needs_terminal" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/xmpp/needs_terminal"/>
- <entry name="command" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/xmpp/command"/>
- <entry name="enabled" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/xmpp/enabled"/>
+ <entry name="needs_terminal" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/xmpp/needs_terminal"/>
+ <entry name="command" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/xmpp/command"/>
+ <entry name="enabled" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/xmpp/enabled"/>
</dir>
<dir name="sip">
- <entry name="needs_terminal" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/sip/needs_terminal"/>
- <entry name="command" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/sip/command"/>
- <entry name="enabled" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/sip/enabled"/>
+ <entry name="needs_terminal" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/sip/needs_terminal"/>
+ <entry name="command" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/sip/command"/>
+ <entry name="enabled" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/sip/enabled"/>
</dir>
<dir name="msnim">
- <entry name="needs_terminal" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/msnim/needs_terminal"/>
- <entry name="command" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/msnim/command"/>
- <entry name="enabled" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/msnim/enabled"/>
+ <entry name="needs_terminal" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/msnim/needs_terminal"/>
+ <entry name="command" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/msnim/command"/>
+ <entry name="enabled" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/msnim/enabled"/>
</dir>
<dir name="irc">
- <entry name="needs_terminal" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/irc/needs_terminal"/>
- <entry name="command" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/irc/command"/>
- <entry name="enabled" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/irc/enabled"/>
+ <entry name="needs_terminal" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/irc/needs_terminal"/>
+ <entry name="command" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/irc/command"/>
+ <entry name="enabled" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/irc/enabled"/>
</dir>
<dir name="icq">
- <entry name="needs_terminal" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/icq/needs_terminal"/>
- <entry name="command" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/icq/command"/>
- <entry name="enabled" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/icq/enabled"/>
+ <entry name="needs_terminal" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/icq/needs_terminal"/>
+ <entry name="command" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/icq/command"/>
+ <entry name="enabled" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/icq/enabled"/>
</dir>
<dir name="gg">
- <entry name="needs_terminal" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/gg/needs_terminal"/>
- <entry name="command" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/gg/command"/>
- <entry name="enabled" mtime="1424852952" schema="/schemas/desktop/gnome/url-handlers/gg/enabled"/>
+ <entry name="needs_terminal" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/gg/needs_terminal"/>
+ <entry name="command" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/gg/command"/>
+ <entry name="enabled" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/gg/enabled"/>
</dir>
<dir name="icyx">
<entry name="enabled" mtime="1359455568" schema="/schemas/desktop/gnome/url-handlers/icyx/enabled"/>
<entry name="enabled" mtime="1430288235" schema="/schemas/desktop/gnome/url-handlers/callto/enabled"/>
</dir>
<dir name="aim">
- <entry name="needs_terminal" mtime="1430288235" schema="/schemas/desktop/gnome/url-handlers/aim/needs_terminal"/>
- <entry name="command" mtime="1430288235" schema="/schemas/desktop/gnome/url-handlers/aim/command"/>
- <entry name="enabled" mtime="1430288235" schema="/schemas/desktop/gnome/url-handlers/aim/enabled"/>
+ <entry name="needs_terminal" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/aim/needs_terminal"/>
+ <entry name="command" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/aim/command"/>
+ <entry name="enabled" mtime="1434435639" schema="/schemas/desktop/gnome/url-handlers/aim/enabled"/>
</dir>
<dir name="mailto">
<entry name="needs_terminal" mtime="1430288235" schema="/schemas/desktop/gnome/url-handlers/mailto/needs_terminal"/>
</dir>
<dir name="url-handlers">
<dir name="ymsgr">
- <entry name="needs_terminal" mtime="1424852952" type="schema" stype="bool" owner="purple">
+ <entry name="needs_terminal" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Run the command in a terminal">
<default type="bool" value="false"/>
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1424852952" type="schema" stype="string" owner="purple">
+ <entry name="command" mtime="1434435639" type="schema" stype="string" owner="purple">
<local_schema locale="C" short_desc="The handler for "ymsgr" URLs">
<default type="string">
<stringvalue>purple-url-handler "%s"</stringvalue>
<longdesc>The command used to handle "ymsgr" URLs, if enabled.</longdesc>
</local_schema>
</entry>
- <entry name="enabled" mtime="1424852952" type="schema" stype="bool" owner="purple">
+ <entry name="enabled" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Whether the specified command should handle "ymsgr" URLs">
<default type="bool" value="true"/>
<longdesc>True if the command specified in the "command" key should handle "ymsgr" URLs.</longdesc>
</entry>
</dir>
<dir name="xmpp">
- <entry name="needs_terminal" mtime="1424852952" type="schema" stype="bool" owner="purple">
+ <entry name="needs_terminal" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Run the command in a terminal">
<default type="bool" value="false"/>
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1424852952" type="schema" stype="string" owner="purple">
+ <entry name="command" mtime="1434435639" type="schema" stype="string" owner="purple">
<local_schema locale="C" short_desc="The handler for "xmpp" URLs">
<default type="string">
<stringvalue>purple-url-handler "%s"</stringvalue>
<longdesc>The command used to handle "xmpp" URLs, if enabled.</longdesc>
</local_schema>
</entry>
- <entry name="enabled" mtime="1424852952" type="schema" stype="bool" owner="purple">
+ <entry name="enabled" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Whether the specified command should handle "xmpp" URLs">
<default type="bool" value="true"/>
<longdesc>True if the command specified in the "command" key should handle "xmpp" URLs.</longdesc>
</entry>
</dir>
<dir name="sip">
- <entry name="needs_terminal" mtime="1424852952" type="schema" stype="bool" owner="purple">
+ <entry name="needs_terminal" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Run the command in a terminal">
<default type="bool" value="false"/>
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1424852952" type="schema" stype="string" owner="purple">
+ <entry name="command" mtime="1434435639" type="schema" stype="string" owner="purple">
<local_schema locale="C" short_desc="The handler for "sip" URLs">
<default type="string">
<stringvalue>purple-url-handler "%s"</stringvalue>
<longdesc>The command used to handle "sip" URLs, if enabled.</longdesc>
</local_schema>
</entry>
- <entry name="enabled" mtime="1424852952" type="schema" stype="bool" owner="purple">
+ <entry name="enabled" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Whether the specified command should handle "sip" URLs">
<default type="bool" value="true"/>
<longdesc>True if the command specified in the "command" key should handle "sip" URLs.</longdesc>
</entry>
</dir>
<dir name="msnim">
- <entry name="needs_terminal" mtime="1424852952" type="schema" stype="bool" owner="purple">
+ <entry name="needs_terminal" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Run the command in a terminal">
<default type="bool" value="false"/>
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1424852952" type="schema" stype="string" owner="purple">
+ <entry name="command" mtime="1434435639" type="schema" stype="string" owner="purple">
<local_schema locale="C" short_desc="The handler for "msnim" URLs">
<default type="string">
<stringvalue>purple-url-handler "%s"</stringvalue>
<longdesc>The command used to handle "msnim" URLs, if enabled.</longdesc>
</local_schema>
</entry>
- <entry name="enabled" mtime="1424852952" type="schema" stype="bool" owner="purple">
+ <entry name="enabled" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Whether the specified command should handle "msnim" URLs">
<default type="bool" value="true"/>
<longdesc>True if the command specified in the "command" key should handle "msnim" URLs.</longdesc>
</entry>
</dir>
<dir name="irc">
- <entry name="needs_terminal" mtime="1424852952" type="schema" stype="bool" owner="purple">
+ <entry name="needs_terminal" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Run the command in a terminal">
<default type="bool" value="false"/>
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1424852952" type="schema" stype="string" owner="purple">
+ <entry name="command" mtime="1434435639" type="schema" stype="string" owner="purple">
<local_schema locale="C" short_desc="The handler for "irc" URLs">
<default type="string">
<stringvalue>purple-url-handler "%s"</stringvalue>
<longdesc>The command used to handle "irc" URLs, if enabled.</longdesc>
</local_schema>
</entry>
- <entry name="enabled" mtime="1424852952" type="schema" stype="bool" owner="purple">
+ <entry name="enabled" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Whether the specified command should handle "irc" URLs">
<default type="bool" value="true"/>
<longdesc>True if the command specified in the "command" key should handle "irc" URLs.</longdesc>
</entry>
</dir>
<dir name="icq">
- <entry name="needs_terminal" mtime="1424852952" type="schema" stype="bool" owner="purple">
+ <entry name="needs_terminal" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Run the command in a terminal">
<default type="bool" value="false"/>
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1424852952" type="schema" stype="string" owner="purple">
+ <entry name="command" mtime="1434435639" type="schema" stype="string" owner="purple">
<local_schema locale="C" short_desc="The handler for "icq" URLs">
<default type="string">
<stringvalue>purple-url-handler "%s"</stringvalue>
<longdesc>The command used to handle "icq" URLs, if enabled.</longdesc>
</local_schema>
</entry>
- <entry name="enabled" mtime="1424852952" type="schema" stype="bool" owner="purple">
+ <entry name="enabled" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Whether the specified command should handle "icq" URLs">
<default type="bool" value="true"/>
<longdesc>True if the command specified in the "command" key should handle "icq" URLs.</longdesc>
</entry>
</dir>
<dir name="gg">
- <entry name="needs_terminal" mtime="1424852952" type="schema" stype="bool" owner="purple">
+ <entry name="needs_terminal" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Run the command in a terminal">
<default type="bool" value="false"/>
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1424852952" type="schema" stype="string" owner="purple">
+ <entry name="command" mtime="1434435639" type="schema" stype="string" owner="purple">
<local_schema locale="C" short_desc="The handler for "gg" URLs">
<default type="string">
<stringvalue>purple-url-handler "%s"</stringvalue>
<longdesc>The command used to handle "gg" URLs, if enabled.</longdesc>
</local_schema>
</entry>
- <entry name="enabled" mtime="1424852952" type="schema" stype="bool" owner="purple">
+ <entry name="enabled" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Whether the specified command should handle "gg" URLs">
<default type="bool" value="true"/>
<longdesc>True if the command specified in the "command" key should handle "gg" URLs.</longdesc>
</entry>
</dir>
<dir name="aim">
- <entry name="needs_terminal" mtime="1430288235" type="schema" stype="bool" owner="gnome">
+ <entry name="needs_terminal" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Run the command in a terminal">
<default type="bool" value="false"/>
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
- <entry name="command" mtime="1430288235" type="schema" stype="string" owner="gnome">
+ <entry name="command" mtime="1434435639" type="schema" stype="string" owner="purple">
<local_schema locale="C" short_desc="The handler for "aim" URLs">
<default type="string">
- <stringvalue>gaim-remote uri "%s"</stringvalue>
+ <stringvalue>purple-url-handler "%s"</stringvalue>
</default>
<longdesc>The command used to handle "aim" URLs, if enabled.</longdesc>
</local_schema>
</entry>
- <entry name="enabled" mtime="1430288235" type="schema" stype="bool" owner="gnome">
+ <entry name="enabled" mtime="1434435639" type="schema" stype="bool" owner="purple">
<local_schema locale="C" short_desc="Whether the specified command should handle "aim" URLs">
<default type="bool" value="true"/>
<longdesc>True if the command specified in the "command" key should handle "aim" URLs.</longdesc>
</locale>
<locale name="de">
- <short>Legt fest, ob das angegebene Kommando „aim“-URLs verarbeiten soll</short>
+ <short>Legt fest, ob dar angegebene Befehl „aim“-URLs verarbeiten soll</short>
<long>Aktivieren, wenn der Befehl, der im „command“-Schlüssel angegeben ist, „aim“-URLs verarbeiten soll.</long>
</locale>
</locale>
<locale name="de">
- <short>Legt fest, ob das angegebene Kommando „irc“-URLs verarbeiten soll</short>
+ <short>Legt fest, ob der angegebene Befehl „irc“-URLs verarbeiten soll</short>
<long>Aktivieren, wenn der Befehl, der im „command“-Schlüssel angegeben ist, „irc“-URLs verarbeiten soll.</long>
</locale>
</locale>
<locale name="de">
- <short>Legt fest, ob das angegebene Kommando „msnim“-URLs verarbeiten soll</short>
+ <short>Legt fest, ob der angegebene Befehl „msnim“-URLs verarbeiten soll</short>
<long>Aktivieren, wenn der Befehl, der im „command“-Schlüssel angegeben ist, „msnim“-URLs verarbeiten soll.</long>
</locale>
</locale>
<locale name="de">
- <short>Legt fest, ob das angegebene Kommando „sip“-URLs verarbeiten soll</short>
+ <short>Legt fest, ob der angegebene Befehl „sip“-URLs verarbeiten soll</short>
<long>Aktivieren, wenn der Befehl, der im „command“-Schlüssel angegeben ist, „sip“-URLs verarbeiten soll.</long>
</locale>
--- /dev/null
+#!/sbin/openrc-run
+# Copyright 2015 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+description="Register misc binary format handlers"
+
+depend()
+{
+ after procfs
+ use modules devfs
+ keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+}
+
+start()
+{
+ ebegin "Loading custom binary format handlers"
+ "$RC_LIBEXECDIR"/sh/binfmt.sh
+ eend $?
+return 0
+}
{
[ "$RC_SYS" = VSERVER -o "$RC_SYS" = LXC ] && return 0
local dir
+ # If / is still read-only due to a problem, this will fail!
+ if ! checkpath -W /; then
+ eerror "/ is not writable; unable to clean up underlying /run"
+ return 1
+ fi
+ if ! checkpath -W /tmp; then
+ eerror "/tmp is not writable; unable to clean up underlying /run"
+ return 1
+ fi
+ # Now we know that we can modify /tmp and /
+ # if mktemp -d fails, it returns an EMPTY string
+ # STDERR: mktemp: failed to create directory via template ‘/tmp/tmp.XXXXXXXXXX’: Read-only file system
+ # STDOUT: ''
+ rc=0
dir=$(mktemp -d)
- mount --bind / $dir
- rm -rf $dir/run/*
- umount $dir
- rm -rf $dir
+ if [ -n "$dir" -a -d $dir -a -w $dir ]; then
+ mount --bind / $dir && rm -rf $dir/run/* || rc=1
+ umount $dir
+ rm -rf $dir
+ else
+ rc=1
+ fi
+ if [ $rc -ne 0 ]; then
+ eerror "Could not clean up underlying /run on /"
+ return 1
+ fi
}
start()
if yesno $log_dmesg; then
if $logw || checkpath -W /var/log; then
# Create an 'after-boot' dmesg log
- if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ -a "$RC_SYS" != LXC ]; then
- dmesg > /var/log/dmesg
- chmod 640 /var/log/dmesg
- fi
+ case "$RC_SYS" in
+ VSERVER|OPENVZ|LXC|SYSTEMD-NSPAWN) ;;
+ *)
+ dmesg > /var/log/dmesg
+ chmod 640 /var/log/dmesg
+ ;;
+ esac
fi
fi
{
need localmount termencoding
after hotplug bootmisc
- keyword -openvz -prefix -uml -vserver -xenu -lxc
+ keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
}
start()
{
provide dev-mount
before dev
- keyword -prefix -vserver -lxc
+ keyword -prefix -systemd-nspawn -vserver -lxc
}
mount_dev()
depend()
{
before dev modules
- keyword -lxc -prefix -vserver
+ keyword -lxc -prefix -systemd-nspawn -vserver
}
start()
depend()
{
use dev clock modules
- keyword -jail -openvz -prefix -timeout -vserver -lxc -uml
+ keyword -jail -openvz -prefix -systemd-nspawn -timeout -vserver -lxc -uml
}
_abort() {
description="Sets the hostname of the machine."
depend() {
- keyword -prefix -lxc
+ keyword -prefix -systemd-nspawn -lxc
}
start()
else
before *
fi
- keyword -openvz -prefix -uml -vserver -xenu -lxc
+ keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
}
setupopts()
{
need localmount termencoding
after bootmisc
- keyword -openvz -prefix -uml -vserver -xenu -lxc
+ keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
}
start()
for file in /etc/local.d/*.start; do
if [ -x "${file}" ]; then
vebegin "Executing \"${file}\""
- "${file}" $redirect
+ eval "${file}" $redirect
retval=$?
if [ ${retval} -ne 0 ]; then
has_errors=1
for file in /etc/local.d/*.stop; do
if [ -x "${file}" ]; then
vebegin "Executing \"${file}\""
- "${file}" $redirect
+ eval "${file}" $redirect
retval=$?
if [ ${retval} -ne 0 ]; then
has_errors=1
need fsck
use lvm modules mtab
after lvm modules
- keyword -jail -prefix -vserver -lxc
+ keyword -jail -prefix -systemd-nspawn -vserver -lxc
}
start()
depend()
{
- keyword -jail -prefix -vserver
+ keyword -jail -prefix -systemd-nspawn -vserver
}
start()
depend()
{
use isapnp
- keyword -openvz -prefix -vserver -lxc
+ keyword -openvz -prefix -systemd-nspawn -vserver -lxc
}
start()
depend()
{
need killprocs savecache
- keyword -openvz -prefix -vserver -lxc
+ keyword -openvz -prefix -systemd-nspawn -vserver -lxc
}
start()
config /etc/fstab
use afc-client amd nfsclient autofs openvpn
use dns
- keyword -jail -prefix -vserver -lxc
+ keyword -jail -prefix -systemd-nspawn -vserver -lxc
}
start()
depend()
{
need localmount
- keyword -openvz -prefix -vserver -lxc
+ keyword -openvz -prefix -systemd-nspawn -vserver -lxc
}
_setleds()
--- /dev/null
+#!/sbin/openrc-run
+# Copyright (c) 2014 Ralph Sennhauser <sera@igentoo.org>
+# Released under the 2-clause BSD license.
+
+# Can be used on OSs that take care of the clock.
+
+description="Provides clock"
+
+depend()
+{
+ provide clock
+}
{
use modules devfs
need localmount
- keyword -openvz -prefix -vserver -lxc
+ keyword -openvz -prefix -systemd-nspawn -vserver -lxc
}
start()
{
- # Make sure we insert usbcore if it's a module
- if [ -f /proc/modules -a ! -d /sys/module/usbcore -a ! -d /proc/bus/usb ]; then
- modprobe -q usbcore
- fi
-
- [ -e /proc/filesystems ] || return 0
-
# Setup Kernel Support for miscellaneous Binary Formats
if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
+ modprobe -q binfmt-misc
if grep -qs binfmt_misc /proc/filesystems; then
ebegin "Mounting misc binary format filesystem"
mount -t binfmt_misc -o nodev,noexec,nosuid \
binfmt_misc /proc/sys/fs/binfmt_misc
- if eend $? ; then
- local fmts
- ebegin "Loading custom binary format handlers"
- fmts=$(grep -hsv -e '^[#;]' -e '^[[:space:]]*$' \
- /run/binfmt.d/*.conf \
- /etc/binfmt.d/*.conf \
- ""/usr/lib/binfmt.d/*.conf)
- if [ -n "${fmts}" ]; then
- echo "${fmts}" > /proc/sys/fs/binfmt_misc/register
- fi
eend $?
- fi
fi
fi
-
- [ "$RC_SYS" = "OPENVZ" ] && return 0
-
- # Check what USB fs the kernel support. Currently
- # 2.5+ kernels, and later 2.4 kernels have 'usbfs',
- # while older kernels have 'usbdevfs'.
- if [ -d /proc/bus/usb -a ! -e /proc/bus/usb/devices ]; then
- local usbfs=$(grep -Fow usbfs /proc/filesystems ||
- grep -Fow usbdevfs /proc/filesystems)
- if [ -n "$usbfs" ]; then
- ebegin "Mounting USB device filesystem [$usbfs]"
- local usbgid="$(getent group usb | \
- sed -e 's/.*:.*:\(.*\):.*/\1/')"
- mount -t $usbfs \
- -o ${usbgid:+devmode=0664,devgid=$usbgid,}noexec,nosuid \
- usbfs /proc/bus/usb
- eend $?
- fi
- fi
-
- # Setup Kernel Support for SELinux
- if [ -d /sys/fs/selinux ] && ! mountinfo -q /sys/fs/selinux; then
- if grep -qs selinuxfs /proc/filesystems; then
- ebegin "Mounting SELinux filesystem"
- mount -t selinuxfs selinuxfs /sys/fs/selinux
- eend $?
- fi
- fi
-
return 0
}
depend()
{
need fsck
- keyword -jail -openvz -prefix -vserver -lxc
+ keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
}
start()
--- /dev/null
+#!/sbin/openrc-run
+# Copyright (C) 2015 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+command=/bin/s6-svscan
+command_args="${RC_SVCDIR}"/s6-scan
+command_background=yes
+pidfile=/var/run/s6-svscan.pid
+
+depend()
+{
+ need localmount
+}
+
+start_pre()
+{
+ einfo "Creating s6 scan directory"
+ checkpath -d -m 0755 "$RC_SVCDIR"/s6-scan
+ return $?
+}
+
+stop_post()
+{
+ ebegin "Stopping any remaining s6 services"
+ s6-svc -dx "${RC_SVCDIR}"/s6-scan/* 2>/dev/null || true
+ eend $?
+
+ ebegin "Stopping any remaining s6 service loggers"
+ s6-svc -dx "${RC_SVCDIR}"/s6-scan/*/log 2>/dev/null || true
+ eend $?
+}
return 1
fi
fi
- if ! checkpath -W "$RC_LIBEXECDIR"/cache; then
- ewarn "WARNING: ${RC_LIBEXECDIR}/cache is not writable!"
+ if ! checkpath -W "$RC_LIBEXECDIR"; then
+ ewarn "WARNING: ${RC_LIBEXECDIR} is not writable!"
if ! yesno "${RC_GOINGDOWN}"; then
ewarn "Unable to save deptree cache"
return 1
local rc=
if [ ! -d "$RC_LIBEXECDIR"/cache ]; then
rm -rf "$RC_LIBEXECDIR"/cache
- if ! mkdir "$RC_LIBEXECDIR"/cache; then
+ if ! mkdir -p "$RC_LIBEXECDIR"/cache; then
rc=$?
if yesno "${RC_GOINGDOWN}"; then
rc=0
fi
- eend $rc
+ eend $rc "Unable to create $RC_SVCDIR/cache"
return $rc
fi
fi
#!/sbin/runscript
-# Copyright 1999-2012 Gentoo Foundation
+# Copyright 1999-2015 Gentoo Foundation
# Distributed under the terms of the GNU General Public License, v2 or later
-# $Header: /var/cvsroot/gentoo-x86/dev-vcs/subversion/files/svnserve.initd2,v 1.2 2012/01/14 19:46:34 tommy Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-vcs/subversion/files/svnserve.initd3,v 1.1 2015/04/09 12:58:45 polynomial-c Exp $
+
+description="svn server"
+pidfile="/var/run/svnserve.pid"
+command="/usr/bin/svnserve"
+command_args="--foreground --daemon ${SVNSERVE_OPTS:---root=/var/svn}"
+command_background="true"
+start_stop_daemon_args="-u ${SVNSERVE_USER:-apache} -g ${SVNSERVE_GROUP:-apache}"
depend() {
need net
}
-start() {
- ebegin "Starting svnserve"
+start_pre() {
# Ensure that we run from a readable working dir, and that we do not
# lock filesystems when being run from such a location.
cd /
- start-stop-daemon --start --quiet --background --make-pidfile \
- --pidfile /var/run/svnserve.pid --exec /usr/bin/svnserve \
- --user ${SVNSERVE_USER:-apache} --group ${SVNSERVE_GROUP:-apache} -- \
- --foreground --daemon ${SVNSERVE_OPTS:---root=/var/svn}
- eend $?
-}
-
-stop() {
- ebegin "Stopping svnserve"
- start-stop-daemon --stop --quiet --pidfile /var/run/svnserve.pid
- eend $?
}
depend()
{
before localmount
- keyword -jail -openvz -prefix -vserver -lxc
+ keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
}
start()
depend()
{
need localmount
- keyword -jail -openvz -prefix -vserver -lxc
+ keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
}
start()
{
before *
provide clock
- keyword -openvz -prefix -uml -vserver -xenu -lxc
+ keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
}
# swclock is an OpenRC built in
depend()
{
before bootmisc logger
- keyword -prefix -vserver
+ keyword -prefix -systemd-nspawn -vserver
}
start()
{
+ local quiet
+ yesno $rc_verbose || quiet=-q
+
ebegin "Configuring kernel parameters"
- sysctl --system
+ sysctl ${quiet} --system
eend $? "Unable to configure some kernel parameters"
}
depend()
{
- keyword -lxc -prefix -vserver
+ keyword -lxc -prefix -systemd-nspawn -vserver
}
mount_sys()
fi
fi
+ # Setup Kernel Support for SELinux
+ if [ -d /sys/fs/selinux ] && ! mountinfo -q /sys/fs/selinux; then
+ if grep -qs selinuxfs /proc/filesystems; then
+ ebegin "Mounting SELinux filesystem"
+ mount -t selinuxfs selinuxfs /sys/fs/selinux
+ eend $?
+ fi
+ fi
+
# setup up kernel support for efivarfs
# slightly complicated, as if it's build as a module but NOT yet loaded,
# it will NOT appear in /proc/filesystems yet
depend()
{
- keyword -lxc -openvz -prefix -uml -vserver -xenu
+ keyword -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
use root
after bootmisc
}
# Copyright 1999-2012 Gentoo Foundation
# Released under the 2-clause BSD license.
-description="set up tmpfiles.d entries"
+description="Set up tmpfiles.d entries"
depend()
{
start()
{
- ebegin "setting up tmpfiles.d entries for /dev"
+ ebegin "Setting up tmpfiles.d entries for /dev"
/lib64/rc/sh/tmpfiles.sh --prefix=/dev --create --boot ${tmpfiles_opts}
eend $?
return 0
# Copyright 1999-2012 Gentoo Foundation
# Released under the 2-clause BSD license.
-description="set up tmpfiles.d entries"
+description="Set up tmpfiles.d entries"
depend()
{
start()
{
- ebegin "setting up tmpfiles.d entries"
+ ebegin "Setting up tmpfiles.d entries"
/lib64/rc/sh/tmpfiles.sh --exclude-prefix=/dev --create --remove --boot \
${tmpfiles_opts}
eend $?
#!/sbin/runscript
-# Copyright 1999-2014 Gentoo Foundation
+# Copyright 1999-2015 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-admin/ulogd/files/ulogd-2-ng.init,v 1.2 2014/08/22 10:31:59 dlan Exp $
+# $Header: /var/cvsroot/gentoo-x86/app-admin/ulogd/files/ulogd.init,v 1.1 2015/05/30 09:38:29 idella4 Exp $
-ULOGD_PIDFILE="/run/ulogd.pid"
-ULOGD_BINARY="/usr/sbin/ulogd"
-ULOGD_OPTS="--daemon --uid ulogd --pidfile ${ULOGD_PIDFILE}"
+extra_started_commands="reload reopen"
-extra_started_commands="reload reopen_logs"
+: ${ULOGD_BINARY:=/usr/sbin/ulogd}
+: ${ULOGD_PIDFILE:=/run/${SVCNAME}.pid}
+: ${ULOGD_OPTS:=--daemon --uid ulogd --pidfile ${ULOGD_PIDFILE}}
depend() {
before iptables ip6tables ebtables firewall
eend $?
}
-reopen_logs() {
+reopen() {
ebegin "Reopening ${SVCNAME} logfiles"
start-stop-daemon --signal HUP --pidfile ${ULOGD_PIDFILE}
eend $?
depend()
{
need localmount
- keyword -jail -lxc -openvz -prefix
+ keyword -jail -lxc -openvz -prefix -systemd-nspawn
}
save_seed()
/usr/lib32/opengl/xorg-x11/lib
/usr/lib64/opengl/xorg-x11/lib
/usr/lib64/qca2
-/usr/lib64/qt4
/usr/lib32/qt4
-/usr/lib/qt4
+/usr/lib64/qt4
/usr/lib/postgresql
/usr/lib64/postgresql
/usr/lib64/postgresql-9.4/lib64/
# restoring guests, even though this may give slower operation for
# some file systems.
#BYPASS_CACHE=0
+
+# If non-zero, try to sync guest time on domain resume. Be aware, that
+# this requires guest agent with support for time synchronization
+# running in the guest. For instance, qemu-ga doesn't support guest time
+# synchronization on Windows guests, but Linux ones. By default, this
+# functionality is turned off.
+#SYNC_TIME=1
# connection succeeds.
#max_queued_clients = 1000
-# The maximum length of queue of accepted but not yet not
+# The maximum length of queue of accepted but not yet
# authenticated clients. The default value is zero, meaning
# the feature is disabled.
#max_anonymous_clients = 20
# however, have different variables store. Therefore the nvram is
# a list of strings when a single item is in form of:
# ${PATH_TO_UEFI_FW}:${PATH_TO_UEFI_VARS}.
-# Later, when libvirt creates per domain variable store, this
-# list is searched for the master image.
-#nvram = [ "/usr/share/OVMF/OVMF_CODE.fd:/usr/share/OVMF/OVMF_VARS.fd" ]
+# Later, when libvirt creates per domain variable store, this list is
+# searched for the master image. The UEFI firmware can be called
+# differently for different guest architectures. For instance, it's OVMF
+# for x86_64 and i686, but it's AAVMF for aarch64. The libvirt default
+# follows this scheme.
+#nvram = [
+# "/usr/share/OVMF/OVMF_CODE.fd:/usr/share/OVMF/OVMF_VARS.fd",
+# "/usr/share/AAVMF/AAVMF_CODE.fd:/usr/share/AAVMF/AAVMF_VARS.fd"
+#]
/var/log/rc.log {
- compress
- rotate 4
- weekly
missingok
notifempty
}
-/var/log/ulogd/ulogd.log /var/log/ulogd/ulogd_syslogemu.log {
+/var/log/ulogd/*.log {
sharedscripts
missingok
notifempty
create 0640 ulogd
postrotate
- /etc/init.d/ulogd reopen_logs > /dev/null
+ [ -f /run/ulogd.pid ] && /bin/kill -HUP $(cat /run/ulogd.pid)
endscript
}
-auth required pam_securetty.so
auth include system-local-login
account include system-local-login
password include system-local-login
auth [success=1 default=ignore] pam_krb5.so ignore_root try_first_pass
auth required pam_unix.so try_first_pass likeauth nullok
auth optional pam_permit.so
-
account [success=1 default=ignore] pam_krb5.so ignore_root try_first_pass
account required pam_unix.so
account optional pam_permit.so
-
password required pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
password [success=1 default=ignore] pam_krb5.so ignore_root try_first_pass
password required pam_unix.so try_first_pass use_authtok nullok sha512 shadow
password optional pam_permit.so
-
session optional pam_ssh.so
session required pam_limits.so
session required pam_env.so
auth required pam_nologin.so
auth include system-auth
auth optional pam_gnome_keyring.so
-
account required pam_access.so
account required pam_nologin.so
account include system-auth
account required pam_tally2.so onerr=succeed
-
password include system-auth
password optional pam_gnome_keyring.so
-
session optional pam_loginuid.so
session required pam_env.so
session optional pam_lastlog.so silent
session optional pam_gnome_keyring.so auto_start
session optional pam_motd.so motd=/etc/motd
session optional pam_mail.so
-
+++ /dev/null
-/etc/php/apache2-php5.5/ext/opcache.ini
\ No newline at end of file
+++ /dev/null
-zend_extension=/usr/lib64/php5.5/lib64/opcache.so
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-; This is php.ini-development INI file.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
-; Development Value: E_ALL
-; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: On
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It is
-; generally recommended that <?php and ?> should be used and that this feature
-; should be disabled, as enabling it may result in issues when generating XML
-; documents, however this remains supported for backward compatibility reasons.
-; Note that this directive does not control the <?= shorthand tag, which can be
-; used regardless of this directive.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 17
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
-zend.enable_gc = On
-
-; If enabled, scripts may be written in encodings that are incompatible with
-; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
-; encodings. To use this feature, mbstring extension must be enabled.
-; Default: Off
-;zend.multibyte = Off
-
-; Allows to set the default encoding for the scripts. This value will be used
-; unless "declare(encoding=...)" directive appears at the top of the script.
-; Only affects if zend.multibyte is set.
-; Default: ""
-;zend.script_encoding =
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL (Show all errors, warnings and notices including coding standards.)
-; E_ALL & ~E_NOTICE (Show all errors, except for notices)
-; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
-; Development Value: E_ALL
-; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
-; http://php.net/error-reporting
-error_reporting = E_ALL
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of formatting the
-; error message as HTML for easier reading. This directive controls whether
-; the error message is formatted as HTML or not.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: On
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set to On *and* docref_root is not empty, then PHP
-; produces clickable error messages that direct to a page describing the error
-; or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty, in which
-; case no links to documentation are generated.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on Windows).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. G,P,C,E & S are abbreviations for the following respective super
-; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
-; paid for the registration of these arrays and because ENV is not as commonly
-; used as the others, ENV is not recommended on productions servers. You
-; can still get access to the environment variables through getenv() should you
-; need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the ENV, REQUEST and SERVER variables are created when they're
-; first used (Just In Time) instead of when the script starts. If these
-; variables are not used within a script, having this directive on will result
-; in a performance gain. The PHP directive register_argc_argv must be disabled
-; for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Whether PHP will read the POST data.
-; This option is enabled by default.
-; Most likely, you won't want to disable this option globally. It causes $_POST
-; and $_FILES to always be empty; the only way you will be able to read the
-; POST data will be through the php://input stream wrapper. This can be useful
-; to proxy requests or to process the POST data in a memory efficient fashion.
-; http://php.net/enable-post-data-reading
-;enable_post_data_reading = Off
-
-; Maximum size of POST data that PHP will accept.
-; Its value may be 0 to disable the limit. It is ignored if POST data reading
-; is disabled through enable_post_data_reading.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "UTF-8"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature. If post reading is disabled through
-; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Directory where the temporary files should be placed.
-; Defaults to the system default (see sys_get_temp_dir)
-; sys_temp_dir = "/tmp"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env =
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[CLI Server]
-; Whether the CLI web server uses ANSI color coding in its terminal output.
-cli_server.color = On
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail().
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-; Log mail to syslog (Event Log on Windows).
-;mail.log = syslog
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use strict session mode.
-; Strict session mode does not accept uninitialized session ID and regenerate
-; session ID if browser sends uninitialized session ID. Strict mode protects
-; applications from session fixation via session adoption vulnerability. It is
-; disabled by default for maximum compatibility, but enabling it is encouraged.
-; https://wiki.php.net/rfc/strict_sessions
-session.use_strict_mode = 0
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 -type f | xargs rm
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-;session.entropy_length = 32
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; Defaults to /dev/urandom
-; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
-; If neither are found at compile time, the default is no entropy file.
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publicly accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; Enable upload progress tracking in $_SESSION
-; Default Value: On
-; Development Value: On
-; Production Value: On
-; http://php.net/session.upload-progress.enabled
-;session.upload_progress.enabled = On
-
-; Cleanup the progress information as soon as all POST data has been read
-; (i.e. upload completed).
-; Default Value: On
-; Development Value: On
-; Production Value: On
-; http://php.net/session.upload-progress.cleanup
-;session.upload_progress.cleanup = On
-
-; A prefix used for the upload progress key in $_SESSION
-; Default Value: "upload_progress_"
-; Development Value: "upload_progress_"
-; Production Value: "upload_progress_"
-; http://php.net/session.upload-progress.prefix
-;session.upload_progress.prefix = "upload_progress_"
-
-; The index name (concatenated with the prefix) in $_SESSION
-; containing the upload progress information
-; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; http://php.net/session.upload-progress.name
-;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
-
-; How frequently the upload progress should be updated.
-; Given either in percentages (per-file), or in bytes
-; Default Value: "1%"
-; Development Value: "1%"
-; Production Value: "1%"
-; http://php.net/session.upload-progress.freq
-;session.upload_progress.freq = "1%"
-
-; The minimum delay between updates, in seconds
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.upload-progress.min-freq
-;session.upload_progress.min_freq = "1"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatibility_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.conf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = UTF-8
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = UTF-8
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = pass
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = On
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[opcache]
-; Determines if Zend OPCache is enabled
-;opcache.enable=0
-
-; Determines if Zend OPCache is enabled for the CLI version of PHP
-;opcache.enable_cli=0
-
-; The OPcache shared memory storage size.
-;opcache.memory_consumption=64
-
-; The amount of memory for interned strings in Mbytes.
-;opcache.interned_strings_buffer=4
-
-; The maximum number of keys (scripts) in the OPcache hash table.
-; Only numbers between 200 and 100000 are allowed.
-;opcache.max_accelerated_files=2000
-
-; The maximum percentage of "wasted" memory until a restart is scheduled.
-;opcache.max_wasted_percentage=5
-
-; When this directive is enabled, the OPcache appends the current working
-; directory to the script key, thus eliminating possible collisions between
-; files with the same name (basename). Disabling the directive improves
-; performance, but may break existing applications.
-;opcache.use_cwd=1
-
-; When disabled, you must reset the OPcache manually or restart the
-; webserver for changes to the filesystem to take effect.
-;opcache.validate_timestamps=1
-
-; How often (in seconds) to check file timestamps for changes to the shared
-; memory storage allocation. ("1" means validate once per second, but only
-; once per request. "0" means always validate)
-;opcache.revalidate_freq=2
-
-; Enables or disables file search in include_path optimization
-;opcache.revalidate_path=0
-
-; If disabled, all PHPDoc comments are dropped from the code to reduce the
-; size of the optimized code.
-;opcache.save_comments=1
-
-; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
-; may be always stored (save_comments=1), but not loaded by applications
-; that don't need them anyway.
-;opcache.load_comments=1
-
-; If enabled, a fast shutdown sequence is used for the accelerated code
-;opcache.fast_shutdown=0
-
-; Allow file existence override (file_exists, etc.) performance feature.
-;opcache.enable_file_override=0
-
-; A bitmask, where each bit enables or disables the appropriate OPcache
-; passes
-;opcache.optimization_level=0xffffffff
-
-;opcache.inherited_hack=1
-;opcache.dups_fix=0
-
-; The location of the OPcache blacklist file (wildcards allowed).
-; Each OPcache blacklist file is a text file that holds the names of files
-; that should not be accelerated. The file format is to add each filename
-; to a new line. The filename may be a full path or just a file prefix
-; (i.e., /var/www/x blacklists all the files and directories in /var/www
-; that start with 'x'). Line starting with a ; are ignored (comments).
-;opcache.blacklist_filename=
-
-; Allows exclusion of large files from being cached. By default all files
-; are cached.
-;opcache.max_file_size=0
-
-; Check the cache checksum each N requests.
-; The default value of "0" means that the checks are disabled.
-;opcache.consistency_checks=0
-
-; How long to wait (in seconds) for a scheduled restart to begin if the cache
-; is not being accessed.
-;opcache.force_restart_timeout=180
-
-; OPcache error_log file name. Empty string assumes "stderr".
-;opcache.error_log=
-
-; All OPcache errors go to the Web server log.
-; By default, only fatal errors (level 0) or errors (level 1) are logged.
-; You can also enable warnings (level 2), info messages (level 3) or
-; debug messages (level 4).
-;opcache.log_verbosity_level=1
-
-; Preferred Shared Memory back-end. Leave empty and let the system decide.
-;opcache.preferred_memory_model=
-
-; Protect the shared memory from unexpected writing during script execution.
-; Useful for internal debugging only.
-;opcache.protect_memory=0
-
-[curl]
-; A default value for the CURLOPT_CAINFO option. This is required to be an
-; absolute path.
-;curl.cainfo =
-
-; Local Variables:
-; tab-width: 4
-; End:
--- /dev/null
+/etc/php/apache2-php5.6/ext/opcache.ini
\ No newline at end of file
--- /dev/null
+zend_extension=/usr/lib64/php5.6/lib64/opcache.so
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it is
+; much more verbose when it comes to errors. We recommend using the
+; development version only in development environments, as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+; This is php.ini-development INI file.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: On
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It is
+; generally recommended that <?php and ?> should be used and that this feature
+; should be disabled, as enabling it may result in issues when generating XML
+; documents, however this remains supported for backward compatibility reasons.
+; Note that this directive does not control the <?= shorthand tag, which can be
+; used regardless of this directive.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+; If enabled, scripts may be written in encodings that are incompatible with
+; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
+; encodings. To use this feature, mbstring extension must be enabled.
+; Default: Off
+;zend.multibyte = Off
+
+; Allows to set the default encoding for the scripts. This value will be used
+; unless "declare(encoding=...)" directive appears at the top of the script.
+; Only affects if zend.multibyte is set.
+; Default: ""
+;zend.script_encoding =
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it is automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL (Show all errors, warnings and notices including coding standards.)
+; E_ALL & ~E_NOTICE (Show all errors, except for notices)
+; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+; http://php.net/error-reporting
+error_reporting = E_ALL
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; For production environments, we recommend logging errors rather than
+; sending them to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. We strongly recommend you
+; set this to 'off' for production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of formatting the
+; error message as HTML for easier reading. This directive controls whether
+; the error message is formatted as HTML or not.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: On
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set to On *and* docref_root is not empty, then PHP
+; produces clickable error messages that direct to a page describing the error
+; or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty, in which
+; case no links to documentation are generated.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on Windows).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. G,P,C,E & S are abbreviations for the following respective super
+; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
+; paid for the registration of these arrays and because ENV is not as commonly
+; used as the others, ENV is not recommended on productions servers. You
+; can still get access to the environment variables through getenv() should you
+; need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P & C) should be
+; registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive
+; are specified in the same manner as the variables_order directive,
+; EXCEPT one. Leaving this value empty will cause PHP to use the value set
+; in the variables_order directive. It does not mean it will leave the super
+; globals array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the ENV, REQUEST and SERVER variables are created when they're
+; first used (Just In Time) instead of when the script starts. If these
+; variables are not used within a script, having this directive on will result
+; in a performance gain. The PHP directive register_argc_argv must be disabled
+; for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Whether PHP will read the POST data.
+; This option is enabled by default.
+; Most likely, you won't want to disable this option globally. It causes $_POST
+; and $_FILES to always be empty; the only way you will be able to read the
+; POST data will be through the php://input stream wrapper. This can be useful
+; to proxy requests or to process the POST data in a memory efficient fashion.
+; http://php.net/enable-post-data-reading
+;enable_post_data_reading = Off
+
+; Maximum size of POST data that PHP will accept.
+; Its value may be 0 to disable the limit. It is ignored if POST data reading
+; is disabled through enable_post_data_reading.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to UTF-8.
+; http://php.net/default-charset
+default_charset = "UTF-8"
+
+; PHP internal character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/internal-encoding
+;internal_encoding =
+
+; PHP input character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/input-encoding
+;input_encoding =
+
+; PHP output character encoding is set to empty.
+; If empty, default_charset is used.
+; mbstring or iconv output handler is used.
+; See also output_buffer.
+; http://php.net/output-encoding
+;output_encoding =
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature and it will be removed in a future version.
+; If post reading is disabled through enable_post_data_reading,
+; $HTTP_RAW_POST_DATA is *NOT* populated.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = -1
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Directory where the temporary files should be placed.
+; Defaults to the system default (see sys_get_temp_dir)
+; sys_temp_dir = "/tmp"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env =
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If set to 0, PHP sends Status: header that
+; is supported by Apache. When this option is set to 1, PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8_12c.dll ; Use with Oracle Database 12c Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[CLI Server]
+; Whether the CLI web server uses ANSI color coding in its terminal output.
+cli_server.color = On
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; If empty, default_charset or input_encoding or iconv.input_encoding is used.
+; The precedence is: default_charset < intput_encoding < iconv.input_encoding
+;iconv.input_encoding =
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;iconv.internal_encoding =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; If empty, default_charset or output_encoding or iconv.output_encoding is used.
+; The precedence is: default_charset < output_encoding < iconv.output_encoding
+; To use an output encoding conversion, iconv's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+;iconv.output_encoding =
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail().
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+; Log mail to syslog (Event Log on Windows).
+;mail.log = syslog
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if
+; your OS has problems with many files in one directory, and is
+; a more efficient layout for servers that handle many sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use strict session mode.
+; Strict session mode does not accept uninitialized session ID and regenerate
+; session ID if browser sends uninitialized session ID. Strict mode protects
+; applications from session fixation via session adoption vulnerability. It is
+; disabled by default for maximum compatibility, but enabling it is encouraged.
+; https://wiki.php.net/rfc/strict_sessions
+session.use_strict_mode = 0
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the be-all and end-all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 -type f | xargs rm
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+;session.entropy_length = 32
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; Defaults to /dev/urandom
+; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
+; If neither are found at compile time, the default is no entropy file.
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users' security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; Enable upload progress tracking in $_SESSION
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.enabled
+;session.upload_progress.enabled = On
+
+; Cleanup the progress information as soon as all POST data has been read
+; (i.e. upload completed).
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.cleanup
+;session.upload_progress.cleanup = On
+
+; A prefix used for the upload progress key in $_SESSION
+; Default Value: "upload_progress_"
+; Development Value: "upload_progress_"
+; Production Value: "upload_progress_"
+; http://php.net/session.upload-progress.prefix
+;session.upload_progress.prefix = "upload_progress_"
+
+; The index name (concatenated with the prefix) in $_SESSION
+; containing the upload progress information
+; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; http://php.net/session.upload-progress.name
+;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
+
+; How frequently the upload progress should be updated.
+; Given either in percentages (per-file), or in bytes
+; Default Value: "1%"
+; Development Value: "1%"
+; Production Value: "1%"
+; http://php.net/session.upload-progress.freq
+;session.upload_progress.freq = "1%"
+
+; The minimum delay between updates, in seconds
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.upload-progress.min-freq
+;session.upload_progress.min_freq = "1"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatibility_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; This affects mb_send_mail() and mbstrig.detect_order.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; internal/script encoding.
+; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;mbstring.internal_encoding =
+
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; http input encoding.
+; mbstring.encoding_traslation = On is needed to use this setting.
+; If empty, default_charset or input_encoding or mbstring.input is used.
+; The precedence is: default_charset < intput_encoding < mbsting.http_input
+; http://php.net/mbstring.http-input
+;mbstring.http_input =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; http output encoding.
+; mb_output_handler must be registered as output buffer to function.
+; If empty, default_charset or output_encoding or mbstring.http_output is used.
+; The precedence is: default_charset < output_encoding < mbstring.http_output
+; To use an output encoding conversion, mbstring's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+; http://php.net/mbstring.http-output
+;mbstring.http_output =
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; "auto" detect order is changed according to mbstring.language
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+; Default: Off
+;mbstring.strict_detection = On
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[opcache]
+; Determines if Zend OPCache is enabled
+;opcache.enable=0
+
+; Determines if Zend OPCache is enabled for the CLI version of PHP
+;opcache.enable_cli=0
+
+; The OPcache shared memory storage size.
+;opcache.memory_consumption=64
+
+; The amount of memory for interned strings in Mbytes.
+;opcache.interned_strings_buffer=4
+
+; The maximum number of keys (scripts) in the OPcache hash table.
+; Only numbers between 200 and 100000 are allowed.
+;opcache.max_accelerated_files=2000
+
+; The maximum percentage of "wasted" memory until a restart is scheduled.
+;opcache.max_wasted_percentage=5
+
+; When this directive is enabled, the OPcache appends the current working
+; directory to the script key, thus eliminating possible collisions between
+; files with the same name (basename). Disabling the directive improves
+; performance, but may break existing applications.
+;opcache.use_cwd=1
+
+; When disabled, you must reset the OPcache manually or restart the
+; webserver for changes to the filesystem to take effect.
+;opcache.validate_timestamps=1
+
+; How often (in seconds) to check file timestamps for changes to the shared
+; memory storage allocation. ("1" means validate once per second, but only
+; once per request. "0" means always validate)
+;opcache.revalidate_freq=2
+
+; Enables or disables file search in include_path optimization
+;opcache.revalidate_path=0
+
+; If disabled, all PHPDoc comments are dropped from the code to reduce the
+; size of the optimized code.
+;opcache.save_comments=1
+
+; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
+; may be always stored (save_comments=1), but not loaded by applications
+; that don't need them anyway.
+;opcache.load_comments=1
+
+; If enabled, a fast shutdown sequence is used for the accelerated code
+;opcache.fast_shutdown=0
+
+; Allow file existence override (file_exists, etc.) performance feature.
+;opcache.enable_file_override=0
+
+; A bitmask, where each bit enables or disables the appropriate OPcache
+; passes
+;opcache.optimization_level=0xffffffff
+
+;opcache.inherited_hack=1
+;opcache.dups_fix=0
+
+; The location of the OPcache blacklist file (wildcards allowed).
+; Each OPcache blacklist file is a text file that holds the names of files
+; that should not be accelerated. The file format is to add each filename
+; to a new line. The filename may be a full path or just a file prefix
+; (i.e., /var/www/x blacklists all the files and directories in /var/www
+; that start with 'x'). Line starting with a ; are ignored (comments).
+;opcache.blacklist_filename=
+
+; Allows exclusion of large files from being cached. By default all files
+; are cached.
+;opcache.max_file_size=0
+
+; Check the cache checksum each N requests.
+; The default value of "0" means that the checks are disabled.
+;opcache.consistency_checks=0
+
+; How long to wait (in seconds) for a scheduled restart to begin if the cache
+; is not being accessed.
+;opcache.force_restart_timeout=180
+
+; OPcache error_log file name. Empty string assumes "stderr".
+;opcache.error_log=
+
+; All OPcache errors go to the Web server log.
+; By default, only fatal errors (level 0) or errors (level 1) are logged.
+; You can also enable warnings (level 2), info messages (level 3) or
+; debug messages (level 4).
+;opcache.log_verbosity_level=1
+
+; Preferred Shared Memory back-end. Leave empty and let the system decide.
+;opcache.preferred_memory_model=
+
+; Protect the shared memory from unexpected writing during script execution.
+; Useful for internal debugging only.
+;opcache.protect_memory=0
+
+[curl]
+; A default value for the CURLOPT_CAINFO option. This is required to be an
+; absolute path.
+;curl.cainfo =
+
+[openssl]
+; The location of a Certificate Authority (CA) file on the local filesystem
+; to use when verifying the identity of SSL/TLS peers. Most users should
+; not specify a value for this directive as PHP will attempt to use the
+; OS-managed cert stores in its absence. If specified, this value may still
+; be overridden on a per-stream basis via the "cafile" SSL stream context
+; option.
+;openssl.cafile=
+
+; If openssl.cafile is not specified or if the CA file is not found, the
+; directory pointed to by openssl.capath is searched for a suitable
+; certificate. This value must be a correctly hashed certificate directory.
+; Most users should not specify a value for this directive as PHP will
+; attempt to use the OS-managed cert stores in its absence. If specified,
+; this value may still be overridden on a per-stream basis via the "capath"
+; SSL stream context option.
+;openssl.capath=
+
+; Local Variables:
+; tab-width: 4
+; End:
+++ /dev/null
-/etc/php/cgi-php5.5/ext/opcache.ini
\ No newline at end of file
+++ /dev/null
-zend_extension=/usr/lib64/php5.5/lib64/opcache.so
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-; This is php.ini-development INI file.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
-; Development Value: E_ALL
-; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: On
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It is
-; generally recommended that <?php and ?> should be used and that this feature
-; should be disabled, as enabling it may result in issues when generating XML
-; documents, however this remains supported for backward compatibility reasons.
-; Note that this directive does not control the <?= shorthand tag, which can be
-; used regardless of this directive.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 17
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
-zend.enable_gc = On
-
-; If enabled, scripts may be written in encodings that are incompatible with
-; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
-; encodings. To use this feature, mbstring extension must be enabled.
-; Default: Off
-;zend.multibyte = Off
-
-; Allows to set the default encoding for the scripts. This value will be used
-; unless "declare(encoding=...)" directive appears at the top of the script.
-; Only affects if zend.multibyte is set.
-; Default: ""
-;zend.script_encoding =
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL (Show all errors, warnings and notices including coding standards.)
-; E_ALL & ~E_NOTICE (Show all errors, except for notices)
-; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
-; Development Value: E_ALL
-; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
-; http://php.net/error-reporting
-error_reporting = E_ALL
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of formatting the
-; error message as HTML for easier reading. This directive controls whether
-; the error message is formatted as HTML or not.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: On
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set to On *and* docref_root is not empty, then PHP
-; produces clickable error messages that direct to a page describing the error
-; or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty, in which
-; case no links to documentation are generated.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on Windows).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. G,P,C,E & S are abbreviations for the following respective super
-; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
-; paid for the registration of these arrays and because ENV is not as commonly
-; used as the others, ENV is not recommended on productions servers. You
-; can still get access to the environment variables through getenv() should you
-; need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the ENV, REQUEST and SERVER variables are created when they're
-; first used (Just In Time) instead of when the script starts. If these
-; variables are not used within a script, having this directive on will result
-; in a performance gain. The PHP directive register_argc_argv must be disabled
-; for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Whether PHP will read the POST data.
-; This option is enabled by default.
-; Most likely, you won't want to disable this option globally. It causes $_POST
-; and $_FILES to always be empty; the only way you will be able to read the
-; POST data will be through the php://input stream wrapper. This can be useful
-; to proxy requests or to process the POST data in a memory efficient fashion.
-; http://php.net/enable-post-data-reading
-;enable_post_data_reading = Off
-
-; Maximum size of POST data that PHP will accept.
-; Its value may be 0 to disable the limit. It is ignored if POST data reading
-; is disabled through enable_post_data_reading.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "UTF-8"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature. If post reading is disabled through
-; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Directory where the temporary files should be placed.
-; Defaults to the system default (see sys_get_temp_dir)
-; sys_temp_dir = "/tmp"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env =
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[CLI Server]
-; Whether the CLI web server uses ANSI color coding in its terminal output.
-cli_server.color = On
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail().
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-; Log mail to syslog (Event Log on Windows).
-;mail.log = syslog
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use strict session mode.
-; Strict session mode does not accept uninitialized session ID and regenerate
-; session ID if browser sends uninitialized session ID. Strict mode protects
-; applications from session fixation via session adoption vulnerability. It is
-; disabled by default for maximum compatibility, but enabling it is encouraged.
-; https://wiki.php.net/rfc/strict_sessions
-session.use_strict_mode = 0
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 -type f | xargs rm
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-;session.entropy_length = 32
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; Defaults to /dev/urandom
-; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
-; If neither are found at compile time, the default is no entropy file.
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publicly accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; Enable upload progress tracking in $_SESSION
-; Default Value: On
-; Development Value: On
-; Production Value: On
-; http://php.net/session.upload-progress.enabled
-;session.upload_progress.enabled = On
-
-; Cleanup the progress information as soon as all POST data has been read
-; (i.e. upload completed).
-; Default Value: On
-; Development Value: On
-; Production Value: On
-; http://php.net/session.upload-progress.cleanup
-;session.upload_progress.cleanup = On
-
-; A prefix used for the upload progress key in $_SESSION
-; Default Value: "upload_progress_"
-; Development Value: "upload_progress_"
-; Production Value: "upload_progress_"
-; http://php.net/session.upload-progress.prefix
-;session.upload_progress.prefix = "upload_progress_"
-
-; The index name (concatenated with the prefix) in $_SESSION
-; containing the upload progress information
-; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; http://php.net/session.upload-progress.name
-;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
-
-; How frequently the upload progress should be updated.
-; Given either in percentages (per-file), or in bytes
-; Default Value: "1%"
-; Development Value: "1%"
-; Production Value: "1%"
-; http://php.net/session.upload-progress.freq
-;session.upload_progress.freq = "1%"
-
-; The minimum delay between updates, in seconds
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.upload-progress.min-freq
-;session.upload_progress.min_freq = "1"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatibility_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.conf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = UTF-8
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = UTF-8
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = pass
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = On
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[opcache]
-; Determines if Zend OPCache is enabled
-;opcache.enable=0
-
-; Determines if Zend OPCache is enabled for the CLI version of PHP
-;opcache.enable_cli=0
-
-; The OPcache shared memory storage size.
-;opcache.memory_consumption=64
-
-; The amount of memory for interned strings in Mbytes.
-;opcache.interned_strings_buffer=4
-
-; The maximum number of keys (scripts) in the OPcache hash table.
-; Only numbers between 200 and 100000 are allowed.
-;opcache.max_accelerated_files=2000
-
-; The maximum percentage of "wasted" memory until a restart is scheduled.
-;opcache.max_wasted_percentage=5
-
-; When this directive is enabled, the OPcache appends the current working
-; directory to the script key, thus eliminating possible collisions between
-; files with the same name (basename). Disabling the directive improves
-; performance, but may break existing applications.
-;opcache.use_cwd=1
-
-; When disabled, you must reset the OPcache manually or restart the
-; webserver for changes to the filesystem to take effect.
-;opcache.validate_timestamps=1
-
-; How often (in seconds) to check file timestamps for changes to the shared
-; memory storage allocation. ("1" means validate once per second, but only
-; once per request. "0" means always validate)
-;opcache.revalidate_freq=2
-
-; Enables or disables file search in include_path optimization
-;opcache.revalidate_path=0
-
-; If disabled, all PHPDoc comments are dropped from the code to reduce the
-; size of the optimized code.
-;opcache.save_comments=1
-
-; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
-; may be always stored (save_comments=1), but not loaded by applications
-; that don't need them anyway.
-;opcache.load_comments=1
-
-; If enabled, a fast shutdown sequence is used for the accelerated code
-;opcache.fast_shutdown=0
-
-; Allow file existence override (file_exists, etc.) performance feature.
-;opcache.enable_file_override=0
-
-; A bitmask, where each bit enables or disables the appropriate OPcache
-; passes
-;opcache.optimization_level=0xffffffff
-
-;opcache.inherited_hack=1
-;opcache.dups_fix=0
-
-; The location of the OPcache blacklist file (wildcards allowed).
-; Each OPcache blacklist file is a text file that holds the names of files
-; that should not be accelerated. The file format is to add each filename
-; to a new line. The filename may be a full path or just a file prefix
-; (i.e., /var/www/x blacklists all the files and directories in /var/www
-; that start with 'x'). Line starting with a ; are ignored (comments).
-;opcache.blacklist_filename=
-
-; Allows exclusion of large files from being cached. By default all files
-; are cached.
-;opcache.max_file_size=0
-
-; Check the cache checksum each N requests.
-; The default value of "0" means that the checks are disabled.
-;opcache.consistency_checks=0
-
-; How long to wait (in seconds) for a scheduled restart to begin if the cache
-; is not being accessed.
-;opcache.force_restart_timeout=180
-
-; OPcache error_log file name. Empty string assumes "stderr".
-;opcache.error_log=
-
-; All OPcache errors go to the Web server log.
-; By default, only fatal errors (level 0) or errors (level 1) are logged.
-; You can also enable warnings (level 2), info messages (level 3) or
-; debug messages (level 4).
-;opcache.log_verbosity_level=1
-
-; Preferred Shared Memory back-end. Leave empty and let the system decide.
-;opcache.preferred_memory_model=
-
-; Protect the shared memory from unexpected writing during script execution.
-; Useful for internal debugging only.
-;opcache.protect_memory=0
-
-[curl]
-; A default value for the CURLOPT_CAINFO option. This is required to be an
-; absolute path.
-;curl.cainfo =
-
-; Local Variables:
-; tab-width: 4
-; End:
--- /dev/null
+/etc/php/cgi-php5.6/ext/opcache.ini
\ No newline at end of file
--- /dev/null
+zend_extension=/usr/lib64/php5.6/lib64/opcache.so
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it is
+; much more verbose when it comes to errors. We recommend using the
+; development version only in development environments, as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+; This is php.ini-development INI file.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: On
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It is
+; generally recommended that <?php and ?> should be used and that this feature
+; should be disabled, as enabling it may result in issues when generating XML
+; documents, however this remains supported for backward compatibility reasons.
+; Note that this directive does not control the <?= shorthand tag, which can be
+; used regardless of this directive.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+; If enabled, scripts may be written in encodings that are incompatible with
+; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
+; encodings. To use this feature, mbstring extension must be enabled.
+; Default: Off
+;zend.multibyte = Off
+
+; Allows to set the default encoding for the scripts. This value will be used
+; unless "declare(encoding=...)" directive appears at the top of the script.
+; Only affects if zend.multibyte is set.
+; Default: ""
+;zend.script_encoding =
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it is automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL (Show all errors, warnings and notices including coding standards.)
+; E_ALL & ~E_NOTICE (Show all errors, except for notices)
+; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+; http://php.net/error-reporting
+error_reporting = E_ALL
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; For production environments, we recommend logging errors rather than
+; sending them to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. We strongly recommend you
+; set this to 'off' for production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of formatting the
+; error message as HTML for easier reading. This directive controls whether
+; the error message is formatted as HTML or not.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: On
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set to On *and* docref_root is not empty, then PHP
+; produces clickable error messages that direct to a page describing the error
+; or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty, in which
+; case no links to documentation are generated.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on Windows).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. G,P,C,E & S are abbreviations for the following respective super
+; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
+; paid for the registration of these arrays and because ENV is not as commonly
+; used as the others, ENV is not recommended on productions servers. You
+; can still get access to the environment variables through getenv() should you
+; need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P & C) should be
+; registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive
+; are specified in the same manner as the variables_order directive,
+; EXCEPT one. Leaving this value empty will cause PHP to use the value set
+; in the variables_order directive. It does not mean it will leave the super
+; globals array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the ENV, REQUEST and SERVER variables are created when they're
+; first used (Just In Time) instead of when the script starts. If these
+; variables are not used within a script, having this directive on will result
+; in a performance gain. The PHP directive register_argc_argv must be disabled
+; for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Whether PHP will read the POST data.
+; This option is enabled by default.
+; Most likely, you won't want to disable this option globally. It causes $_POST
+; and $_FILES to always be empty; the only way you will be able to read the
+; POST data will be through the php://input stream wrapper. This can be useful
+; to proxy requests or to process the POST data in a memory efficient fashion.
+; http://php.net/enable-post-data-reading
+;enable_post_data_reading = Off
+
+; Maximum size of POST data that PHP will accept.
+; Its value may be 0 to disable the limit. It is ignored if POST data reading
+; is disabled through enable_post_data_reading.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to UTF-8.
+; http://php.net/default-charset
+default_charset = "UTF-8"
+
+; PHP internal character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/internal-encoding
+;internal_encoding =
+
+; PHP input character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/input-encoding
+;input_encoding =
+
+; PHP output character encoding is set to empty.
+; If empty, default_charset is used.
+; mbstring or iconv output handler is used.
+; See also output_buffer.
+; http://php.net/output-encoding
+;output_encoding =
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature and it will be removed in a future version.
+; If post reading is disabled through enable_post_data_reading,
+; $HTTP_RAW_POST_DATA is *NOT* populated.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = -1
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Directory where the temporary files should be placed.
+; Defaults to the system default (see sys_get_temp_dir)
+; sys_temp_dir = "/tmp"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env =
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If set to 0, PHP sends Status: header that
+; is supported by Apache. When this option is set to 1, PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8_12c.dll ; Use with Oracle Database 12c Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[CLI Server]
+; Whether the CLI web server uses ANSI color coding in its terminal output.
+cli_server.color = On
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; If empty, default_charset or input_encoding or iconv.input_encoding is used.
+; The precedence is: default_charset < intput_encoding < iconv.input_encoding
+;iconv.input_encoding =
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;iconv.internal_encoding =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; If empty, default_charset or output_encoding or iconv.output_encoding is used.
+; The precedence is: default_charset < output_encoding < iconv.output_encoding
+; To use an output encoding conversion, iconv's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+;iconv.output_encoding =
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail().
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+; Log mail to syslog (Event Log on Windows).
+;mail.log = syslog
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if
+; your OS has problems with many files in one directory, and is
+; a more efficient layout for servers that handle many sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use strict session mode.
+; Strict session mode does not accept uninitialized session ID and regenerate
+; session ID if browser sends uninitialized session ID. Strict mode protects
+; applications from session fixation via session adoption vulnerability. It is
+; disabled by default for maximum compatibility, but enabling it is encouraged.
+; https://wiki.php.net/rfc/strict_sessions
+session.use_strict_mode = 0
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the be-all and end-all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 -type f | xargs rm
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+;session.entropy_length = 32
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; Defaults to /dev/urandom
+; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
+; If neither are found at compile time, the default is no entropy file.
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users' security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; Enable upload progress tracking in $_SESSION
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.enabled
+;session.upload_progress.enabled = On
+
+; Cleanup the progress information as soon as all POST data has been read
+; (i.e. upload completed).
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.cleanup
+;session.upload_progress.cleanup = On
+
+; A prefix used for the upload progress key in $_SESSION
+; Default Value: "upload_progress_"
+; Development Value: "upload_progress_"
+; Production Value: "upload_progress_"
+; http://php.net/session.upload-progress.prefix
+;session.upload_progress.prefix = "upload_progress_"
+
+; The index name (concatenated with the prefix) in $_SESSION
+; containing the upload progress information
+; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; http://php.net/session.upload-progress.name
+;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
+
+; How frequently the upload progress should be updated.
+; Given either in percentages (per-file), or in bytes
+; Default Value: "1%"
+; Development Value: "1%"
+; Production Value: "1%"
+; http://php.net/session.upload-progress.freq
+;session.upload_progress.freq = "1%"
+
+; The minimum delay between updates, in seconds
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.upload-progress.min-freq
+;session.upload_progress.min_freq = "1"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatibility_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; This affects mb_send_mail() and mbstrig.detect_order.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; internal/script encoding.
+; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;mbstring.internal_encoding =
+
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; http input encoding.
+; mbstring.encoding_traslation = On is needed to use this setting.
+; If empty, default_charset or input_encoding or mbstring.input is used.
+; The precedence is: default_charset < intput_encoding < mbsting.http_input
+; http://php.net/mbstring.http-input
+;mbstring.http_input =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; http output encoding.
+; mb_output_handler must be registered as output buffer to function.
+; If empty, default_charset or output_encoding or mbstring.http_output is used.
+; The precedence is: default_charset < output_encoding < mbstring.http_output
+; To use an output encoding conversion, mbstring's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+; http://php.net/mbstring.http-output
+;mbstring.http_output =
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; "auto" detect order is changed according to mbstring.language
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+; Default: Off
+;mbstring.strict_detection = On
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[opcache]
+; Determines if Zend OPCache is enabled
+;opcache.enable=0
+
+; Determines if Zend OPCache is enabled for the CLI version of PHP
+;opcache.enable_cli=0
+
+; The OPcache shared memory storage size.
+;opcache.memory_consumption=64
+
+; The amount of memory for interned strings in Mbytes.
+;opcache.interned_strings_buffer=4
+
+; The maximum number of keys (scripts) in the OPcache hash table.
+; Only numbers between 200 and 100000 are allowed.
+;opcache.max_accelerated_files=2000
+
+; The maximum percentage of "wasted" memory until a restart is scheduled.
+;opcache.max_wasted_percentage=5
+
+; When this directive is enabled, the OPcache appends the current working
+; directory to the script key, thus eliminating possible collisions between
+; files with the same name (basename). Disabling the directive improves
+; performance, but may break existing applications.
+;opcache.use_cwd=1
+
+; When disabled, you must reset the OPcache manually or restart the
+; webserver for changes to the filesystem to take effect.
+;opcache.validate_timestamps=1
+
+; How often (in seconds) to check file timestamps for changes to the shared
+; memory storage allocation. ("1" means validate once per second, but only
+; once per request. "0" means always validate)
+;opcache.revalidate_freq=2
+
+; Enables or disables file search in include_path optimization
+;opcache.revalidate_path=0
+
+; If disabled, all PHPDoc comments are dropped from the code to reduce the
+; size of the optimized code.
+;opcache.save_comments=1
+
+; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
+; may be always stored (save_comments=1), but not loaded by applications
+; that don't need them anyway.
+;opcache.load_comments=1
+
+; If enabled, a fast shutdown sequence is used for the accelerated code
+;opcache.fast_shutdown=0
+
+; Allow file existence override (file_exists, etc.) performance feature.
+;opcache.enable_file_override=0
+
+; A bitmask, where each bit enables or disables the appropriate OPcache
+; passes
+;opcache.optimization_level=0xffffffff
+
+;opcache.inherited_hack=1
+;opcache.dups_fix=0
+
+; The location of the OPcache blacklist file (wildcards allowed).
+; Each OPcache blacklist file is a text file that holds the names of files
+; that should not be accelerated. The file format is to add each filename
+; to a new line. The filename may be a full path or just a file prefix
+; (i.e., /var/www/x blacklists all the files and directories in /var/www
+; that start with 'x'). Line starting with a ; are ignored (comments).
+;opcache.blacklist_filename=
+
+; Allows exclusion of large files from being cached. By default all files
+; are cached.
+;opcache.max_file_size=0
+
+; Check the cache checksum each N requests.
+; The default value of "0" means that the checks are disabled.
+;opcache.consistency_checks=0
+
+; How long to wait (in seconds) for a scheduled restart to begin if the cache
+; is not being accessed.
+;opcache.force_restart_timeout=180
+
+; OPcache error_log file name. Empty string assumes "stderr".
+;opcache.error_log=
+
+; All OPcache errors go to the Web server log.
+; By default, only fatal errors (level 0) or errors (level 1) are logged.
+; You can also enable warnings (level 2), info messages (level 3) or
+; debug messages (level 4).
+;opcache.log_verbosity_level=1
+
+; Preferred Shared Memory back-end. Leave empty and let the system decide.
+;opcache.preferred_memory_model=
+
+; Protect the shared memory from unexpected writing during script execution.
+; Useful for internal debugging only.
+;opcache.protect_memory=0
+
+[curl]
+; A default value for the CURLOPT_CAINFO option. This is required to be an
+; absolute path.
+;curl.cainfo =
+
+[openssl]
+; The location of a Certificate Authority (CA) file on the local filesystem
+; to use when verifying the identity of SSL/TLS peers. Most users should
+; not specify a value for this directive as PHP will attempt to use the
+; OS-managed cert stores in its absence. If specified, this value may still
+; be overridden on a per-stream basis via the "cafile" SSL stream context
+; option.
+;openssl.cafile=
+
+; If openssl.cafile is not specified or if the CA file is not found, the
+; directory pointed to by openssl.capath is searched for a suitable
+; certificate. This value must be a correctly hashed certificate directory.
+; Most users should not specify a value for this directive as PHP will
+; attempt to use the OS-managed cert stores in its absence. If specified,
+; this value may still be overridden on a per-stream basis via the "capath"
+; SSL stream context option.
+;openssl.capath=
+
+; Local Variables:
+; tab-width: 4
+; End:
+++ /dev/null
-/etc/php/cli-php5.5/ext/opcache.ini
\ No newline at end of file
+++ /dev/null
-zend_extension=/usr/lib64/php5.5/lib64/opcache.so
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-; This is php.ini-development INI file.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
-; Development Value: E_ALL
-; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: On
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It is
-; generally recommended that <?php and ?> should be used and that this feature
-; should be disabled, as enabling it may result in issues when generating XML
-; documents, however this remains supported for backward compatibility reasons.
-; Note that this directive does not control the <?= shorthand tag, which can be
-; used regardless of this directive.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 17
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
-zend.enable_gc = On
-
-; If enabled, scripts may be written in encodings that are incompatible with
-; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
-; encodings. To use this feature, mbstring extension must be enabled.
-; Default: Off
-;zend.multibyte = Off
-
-; Allows to set the default encoding for the scripts. This value will be used
-; unless "declare(encoding=...)" directive appears at the top of the script.
-; Only affects if zend.multibyte is set.
-; Default: ""
-;zend.script_encoding =
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL (Show all errors, warnings and notices including coding standards.)
-; E_ALL & ~E_NOTICE (Show all errors, except for notices)
-; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
-; Development Value: E_ALL
-; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
-; http://php.net/error-reporting
-error_reporting = E_ALL
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of formatting the
-; error message as HTML for easier reading. This directive controls whether
-; the error message is formatted as HTML or not.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: On
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set to On *and* docref_root is not empty, then PHP
-; produces clickable error messages that direct to a page describing the error
-; or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty, in which
-; case no links to documentation are generated.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on Windows).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. G,P,C,E & S are abbreviations for the following respective super
-; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
-; paid for the registration of these arrays and because ENV is not as commonly
-; used as the others, ENV is not recommended on productions servers. You
-; can still get access to the environment variables through getenv() should you
-; need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the ENV, REQUEST and SERVER variables are created when they're
-; first used (Just In Time) instead of when the script starts. If these
-; variables are not used within a script, having this directive on will result
-; in a performance gain. The PHP directive register_argc_argv must be disabled
-; for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Whether PHP will read the POST data.
-; This option is enabled by default.
-; Most likely, you won't want to disable this option globally. It causes $_POST
-; and $_FILES to always be empty; the only way you will be able to read the
-; POST data will be through the php://input stream wrapper. This can be useful
-; to proxy requests or to process the POST data in a memory efficient fashion.
-; http://php.net/enable-post-data-reading
-;enable_post_data_reading = Off
-
-; Maximum size of POST data that PHP will accept.
-; Its value may be 0 to disable the limit. It is ignored if POST data reading
-; is disabled through enable_post_data_reading.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "UTF-8"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature. If post reading is disabled through
-; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Directory where the temporary files should be placed.
-; Defaults to the system default (see sys_get_temp_dir)
-; sys_temp_dir = "/tmp"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env =
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[CLI Server]
-; Whether the CLI web server uses ANSI color coding in its terminal output.
-cli_server.color = On
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail().
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-; Log mail to syslog (Event Log on Windows).
-;mail.log = syslog
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use strict session mode.
-; Strict session mode does not accept uninitialized session ID and regenerate
-; session ID if browser sends uninitialized session ID. Strict mode protects
-; applications from session fixation via session adoption vulnerability. It is
-; disabled by default for maximum compatibility, but enabling it is encouraged.
-; https://wiki.php.net/rfc/strict_sessions
-session.use_strict_mode = 0
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 -type f | xargs rm
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-;session.entropy_length = 32
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; Defaults to /dev/urandom
-; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
-; If neither are found at compile time, the default is no entropy file.
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publicly accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; Enable upload progress tracking in $_SESSION
-; Default Value: On
-; Development Value: On
-; Production Value: On
-; http://php.net/session.upload-progress.enabled
-;session.upload_progress.enabled = On
-
-; Cleanup the progress information as soon as all POST data has been read
-; (i.e. upload completed).
-; Default Value: On
-; Development Value: On
-; Production Value: On
-; http://php.net/session.upload-progress.cleanup
-;session.upload_progress.cleanup = On
-
-; A prefix used for the upload progress key in $_SESSION
-; Default Value: "upload_progress_"
-; Development Value: "upload_progress_"
-; Production Value: "upload_progress_"
-; http://php.net/session.upload-progress.prefix
-;session.upload_progress.prefix = "upload_progress_"
-
-; The index name (concatenated with the prefix) in $_SESSION
-; containing the upload progress information
-; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; http://php.net/session.upload-progress.name
-;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
-
-; How frequently the upload progress should be updated.
-; Given either in percentages (per-file), or in bytes
-; Default Value: "1%"
-; Development Value: "1%"
-; Production Value: "1%"
-; http://php.net/session.upload-progress.freq
-;session.upload_progress.freq = "1%"
-
-; The minimum delay between updates, in seconds
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.upload-progress.min-freq
-;session.upload_progress.min_freq = "1"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatibility_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.conf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = UTF-8
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = UTF-8
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = pass
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = On
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[opcache]
-; Determines if Zend OPCache is enabled
-;opcache.enable=0
-
-; Determines if Zend OPCache is enabled for the CLI version of PHP
-;opcache.enable_cli=0
-
-; The OPcache shared memory storage size.
-;opcache.memory_consumption=64
-
-; The amount of memory for interned strings in Mbytes.
-;opcache.interned_strings_buffer=4
-
-; The maximum number of keys (scripts) in the OPcache hash table.
-; Only numbers between 200 and 100000 are allowed.
-;opcache.max_accelerated_files=2000
-
-; The maximum percentage of "wasted" memory until a restart is scheduled.
-;opcache.max_wasted_percentage=5
-
-; When this directive is enabled, the OPcache appends the current working
-; directory to the script key, thus eliminating possible collisions between
-; files with the same name (basename). Disabling the directive improves
-; performance, but may break existing applications.
-;opcache.use_cwd=1
-
-; When disabled, you must reset the OPcache manually or restart the
-; webserver for changes to the filesystem to take effect.
-;opcache.validate_timestamps=1
-
-; How often (in seconds) to check file timestamps for changes to the shared
-; memory storage allocation. ("1" means validate once per second, but only
-; once per request. "0" means always validate)
-;opcache.revalidate_freq=2
-
-; Enables or disables file search in include_path optimization
-;opcache.revalidate_path=0
-
-; If disabled, all PHPDoc comments are dropped from the code to reduce the
-; size of the optimized code.
-;opcache.save_comments=1
-
-; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
-; may be always stored (save_comments=1), but not loaded by applications
-; that don't need them anyway.
-;opcache.load_comments=1
-
-; If enabled, a fast shutdown sequence is used for the accelerated code
-;opcache.fast_shutdown=0
-
-; Allow file existence override (file_exists, etc.) performance feature.
-;opcache.enable_file_override=0
-
-; A bitmask, where each bit enables or disables the appropriate OPcache
-; passes
-;opcache.optimization_level=0xffffffff
-
-;opcache.inherited_hack=1
-;opcache.dups_fix=0
-
-; The location of the OPcache blacklist file (wildcards allowed).
-; Each OPcache blacklist file is a text file that holds the names of files
-; that should not be accelerated. The file format is to add each filename
-; to a new line. The filename may be a full path or just a file prefix
-; (i.e., /var/www/x blacklists all the files and directories in /var/www
-; that start with 'x'). Line starting with a ; are ignored (comments).
-;opcache.blacklist_filename=
-
-; Allows exclusion of large files from being cached. By default all files
-; are cached.
-;opcache.max_file_size=0
-
-; Check the cache checksum each N requests.
-; The default value of "0" means that the checks are disabled.
-;opcache.consistency_checks=0
-
-; How long to wait (in seconds) for a scheduled restart to begin if the cache
-; is not being accessed.
-;opcache.force_restart_timeout=180
-
-; OPcache error_log file name. Empty string assumes "stderr".
-;opcache.error_log=
-
-; All OPcache errors go to the Web server log.
-; By default, only fatal errors (level 0) or errors (level 1) are logged.
-; You can also enable warnings (level 2), info messages (level 3) or
-; debug messages (level 4).
-;opcache.log_verbosity_level=1
-
-; Preferred Shared Memory back-end. Leave empty and let the system decide.
-;opcache.preferred_memory_model=
-
-; Protect the shared memory from unexpected writing during script execution.
-; Useful for internal debugging only.
-;opcache.protect_memory=0
-
-[curl]
-; A default value for the CURLOPT_CAINFO option. This is required to be an
-; absolute path.
-;curl.cainfo =
-
-; Local Variables:
-; tab-width: 4
-; End:
--- /dev/null
+/etc/php/cli-php5.6/ext/opcache.ini
\ No newline at end of file
--- /dev/null
+zend_extension=/usr/lib64/php5.6/lib64/opcache.so
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it is
+; much more verbose when it comes to errors. We recommend using the
+; development version only in development environments, as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+; This is php.ini-development INI file.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: On
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It is
+; generally recommended that <?php and ?> should be used and that this feature
+; should be disabled, as enabling it may result in issues when generating XML
+; documents, however this remains supported for backward compatibility reasons.
+; Note that this directive does not control the <?= shorthand tag, which can be
+; used regardless of this directive.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+; If enabled, scripts may be written in encodings that are incompatible with
+; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
+; encodings. To use this feature, mbstring extension must be enabled.
+; Default: Off
+;zend.multibyte = Off
+
+; Allows to set the default encoding for the scripts. This value will be used
+; unless "declare(encoding=...)" directive appears at the top of the script.
+; Only affects if zend.multibyte is set.
+; Default: ""
+;zend.script_encoding =
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it is automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL (Show all errors, warnings and notices including coding standards.)
+; E_ALL & ~E_NOTICE (Show all errors, except for notices)
+; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+; http://php.net/error-reporting
+error_reporting = E_ALL
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; For production environments, we recommend logging errors rather than
+; sending them to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. We strongly recommend you
+; set this to 'off' for production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of formatting the
+; error message as HTML for easier reading. This directive controls whether
+; the error message is formatted as HTML or not.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: On
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set to On *and* docref_root is not empty, then PHP
+; produces clickable error messages that direct to a page describing the error
+; or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty, in which
+; case no links to documentation are generated.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on Windows).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. G,P,C,E & S are abbreviations for the following respective super
+; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
+; paid for the registration of these arrays and because ENV is not as commonly
+; used as the others, ENV is not recommended on productions servers. You
+; can still get access to the environment variables through getenv() should you
+; need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P & C) should be
+; registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive
+; are specified in the same manner as the variables_order directive,
+; EXCEPT one. Leaving this value empty will cause PHP to use the value set
+; in the variables_order directive. It does not mean it will leave the super
+; globals array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the ENV, REQUEST and SERVER variables are created when they're
+; first used (Just In Time) instead of when the script starts. If these
+; variables are not used within a script, having this directive on will result
+; in a performance gain. The PHP directive register_argc_argv must be disabled
+; for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Whether PHP will read the POST data.
+; This option is enabled by default.
+; Most likely, you won't want to disable this option globally. It causes $_POST
+; and $_FILES to always be empty; the only way you will be able to read the
+; POST data will be through the php://input stream wrapper. This can be useful
+; to proxy requests or to process the POST data in a memory efficient fashion.
+; http://php.net/enable-post-data-reading
+;enable_post_data_reading = Off
+
+; Maximum size of POST data that PHP will accept.
+; Its value may be 0 to disable the limit. It is ignored if POST data reading
+; is disabled through enable_post_data_reading.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to UTF-8.
+; http://php.net/default-charset
+default_charset = "UTF-8"
+
+; PHP internal character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/internal-encoding
+;internal_encoding =
+
+; PHP input character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/input-encoding
+;input_encoding =
+
+; PHP output character encoding is set to empty.
+; If empty, default_charset is used.
+; mbstring or iconv output handler is used.
+; See also output_buffer.
+; http://php.net/output-encoding
+;output_encoding =
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature and it will be removed in a future version.
+; If post reading is disabled through enable_post_data_reading,
+; $HTTP_RAW_POST_DATA is *NOT* populated.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = -1
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Directory where the temporary files should be placed.
+; Defaults to the system default (see sys_get_temp_dir)
+; sys_temp_dir = "/tmp"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env =
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If set to 0, PHP sends Status: header that
+; is supported by Apache. When this option is set to 1, PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8_12c.dll ; Use with Oracle Database 12c Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[CLI Server]
+; Whether the CLI web server uses ANSI color coding in its terminal output.
+cli_server.color = On
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; If empty, default_charset or input_encoding or iconv.input_encoding is used.
+; The precedence is: default_charset < intput_encoding < iconv.input_encoding
+;iconv.input_encoding =
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;iconv.internal_encoding =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; If empty, default_charset or output_encoding or iconv.output_encoding is used.
+; The precedence is: default_charset < output_encoding < iconv.output_encoding
+; To use an output encoding conversion, iconv's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+;iconv.output_encoding =
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail().
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+; Log mail to syslog (Event Log on Windows).
+;mail.log = syslog
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if
+; your OS has problems with many files in one directory, and is
+; a more efficient layout for servers that handle many sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use strict session mode.
+; Strict session mode does not accept uninitialized session ID and regenerate
+; session ID if browser sends uninitialized session ID. Strict mode protects
+; applications from session fixation via session adoption vulnerability. It is
+; disabled by default for maximum compatibility, but enabling it is encouraged.
+; https://wiki.php.net/rfc/strict_sessions
+session.use_strict_mode = 0
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the be-all and end-all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 -type f | xargs rm
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+;session.entropy_length = 32
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; Defaults to /dev/urandom
+; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
+; If neither are found at compile time, the default is no entropy file.
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users' security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; Enable upload progress tracking in $_SESSION
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.enabled
+;session.upload_progress.enabled = On
+
+; Cleanup the progress information as soon as all POST data has been read
+; (i.e. upload completed).
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.cleanup
+;session.upload_progress.cleanup = On
+
+; A prefix used for the upload progress key in $_SESSION
+; Default Value: "upload_progress_"
+; Development Value: "upload_progress_"
+; Production Value: "upload_progress_"
+; http://php.net/session.upload-progress.prefix
+;session.upload_progress.prefix = "upload_progress_"
+
+; The index name (concatenated with the prefix) in $_SESSION
+; containing the upload progress information
+; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; http://php.net/session.upload-progress.name
+;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
+
+; How frequently the upload progress should be updated.
+; Given either in percentages (per-file), or in bytes
+; Default Value: "1%"
+; Development Value: "1%"
+; Production Value: "1%"
+; http://php.net/session.upload-progress.freq
+;session.upload_progress.freq = "1%"
+
+; The minimum delay between updates, in seconds
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.upload-progress.min-freq
+;session.upload_progress.min_freq = "1"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatibility_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; This affects mb_send_mail() and mbstrig.detect_order.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; internal/script encoding.
+; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;mbstring.internal_encoding =
+
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; http input encoding.
+; mbstring.encoding_traslation = On is needed to use this setting.
+; If empty, default_charset or input_encoding or mbstring.input is used.
+; The precedence is: default_charset < intput_encoding < mbsting.http_input
+; http://php.net/mbstring.http-input
+;mbstring.http_input =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; http output encoding.
+; mb_output_handler must be registered as output buffer to function.
+; If empty, default_charset or output_encoding or mbstring.http_output is used.
+; The precedence is: default_charset < output_encoding < mbstring.http_output
+; To use an output encoding conversion, mbstring's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+; http://php.net/mbstring.http-output
+;mbstring.http_output =
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; "auto" detect order is changed according to mbstring.language
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+; Default: Off
+;mbstring.strict_detection = On
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[opcache]
+; Determines if Zend OPCache is enabled
+;opcache.enable=0
+
+; Determines if Zend OPCache is enabled for the CLI version of PHP
+;opcache.enable_cli=0
+
+; The OPcache shared memory storage size.
+;opcache.memory_consumption=64
+
+; The amount of memory for interned strings in Mbytes.
+;opcache.interned_strings_buffer=4
+
+; The maximum number of keys (scripts) in the OPcache hash table.
+; Only numbers between 200 and 100000 are allowed.
+;opcache.max_accelerated_files=2000
+
+; The maximum percentage of "wasted" memory until a restart is scheduled.
+;opcache.max_wasted_percentage=5
+
+; When this directive is enabled, the OPcache appends the current working
+; directory to the script key, thus eliminating possible collisions between
+; files with the same name (basename). Disabling the directive improves
+; performance, but may break existing applications.
+;opcache.use_cwd=1
+
+; When disabled, you must reset the OPcache manually or restart the
+; webserver for changes to the filesystem to take effect.
+;opcache.validate_timestamps=1
+
+; How often (in seconds) to check file timestamps for changes to the shared
+; memory storage allocation. ("1" means validate once per second, but only
+; once per request. "0" means always validate)
+;opcache.revalidate_freq=2
+
+; Enables or disables file search in include_path optimization
+;opcache.revalidate_path=0
+
+; If disabled, all PHPDoc comments are dropped from the code to reduce the
+; size of the optimized code.
+;opcache.save_comments=1
+
+; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
+; may be always stored (save_comments=1), but not loaded by applications
+; that don't need them anyway.
+;opcache.load_comments=1
+
+; If enabled, a fast shutdown sequence is used for the accelerated code
+;opcache.fast_shutdown=0
+
+; Allow file existence override (file_exists, etc.) performance feature.
+;opcache.enable_file_override=0
+
+; A bitmask, where each bit enables or disables the appropriate OPcache
+; passes
+;opcache.optimization_level=0xffffffff
+
+;opcache.inherited_hack=1
+;opcache.dups_fix=0
+
+; The location of the OPcache blacklist file (wildcards allowed).
+; Each OPcache blacklist file is a text file that holds the names of files
+; that should not be accelerated. The file format is to add each filename
+; to a new line. The filename may be a full path or just a file prefix
+; (i.e., /var/www/x blacklists all the files and directories in /var/www
+; that start with 'x'). Line starting with a ; are ignored (comments).
+;opcache.blacklist_filename=
+
+; Allows exclusion of large files from being cached. By default all files
+; are cached.
+;opcache.max_file_size=0
+
+; Check the cache checksum each N requests.
+; The default value of "0" means that the checks are disabled.
+;opcache.consistency_checks=0
+
+; How long to wait (in seconds) for a scheduled restart to begin if the cache
+; is not being accessed.
+;opcache.force_restart_timeout=180
+
+; OPcache error_log file name. Empty string assumes "stderr".
+;opcache.error_log=
+
+; All OPcache errors go to the Web server log.
+; By default, only fatal errors (level 0) or errors (level 1) are logged.
+; You can also enable warnings (level 2), info messages (level 3) or
+; debug messages (level 4).
+;opcache.log_verbosity_level=1
+
+; Preferred Shared Memory back-end. Leave empty and let the system decide.
+;opcache.preferred_memory_model=
+
+; Protect the shared memory from unexpected writing during script execution.
+; Useful for internal debugging only.
+;opcache.protect_memory=0
+
+[curl]
+; A default value for the CURLOPT_CAINFO option. This is required to be an
+; absolute path.
+;curl.cainfo =
+
+[openssl]
+; The location of a Certificate Authority (CA) file on the local filesystem
+; to use when verifying the identity of SSL/TLS peers. Most users should
+; not specify a value for this directive as PHP will attempt to use the
+; OS-managed cert stores in its absence. If specified, this value may still
+; be overridden on a per-stream basis via the "cafile" SSL stream context
+; option.
+;openssl.cafile=
+
+; If openssl.cafile is not specified or if the CA file is not found, the
+; directory pointed to by openssl.capath is searched for a suitable
+; certificate. This value must be a correctly hashed certificate directory.
+; Most users should not specify a value for this directive as PHP will
+; attempt to use the OS-managed cert stores in its absence. If specified,
+; this value may still be overridden on a per-stream basis via the "capath"
+; SSL stream context option.
+;openssl.capath=
+
+; Local Variables:
+; tab-width: 4
+; End:
+++ /dev/null
-/etc/php/embed-php5.5/ext/opcache.ini
\ No newline at end of file
+++ /dev/null
-zend_extension=/usr/lib64/php5.5/lib64/opcache.so
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-; This is php.ini-development INI file.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
-; Development Value: E_ALL
-; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: On
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It is
-; generally recommended that <?php and ?> should be used and that this feature
-; should be disabled, as enabling it may result in issues when generating XML
-; documents, however this remains supported for backward compatibility reasons.
-; Note that this directive does not control the <?= shorthand tag, which can be
-; used regardless of this directive.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 17
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
-zend.enable_gc = On
-
-; If enabled, scripts may be written in encodings that are incompatible with
-; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
-; encodings. To use this feature, mbstring extension must be enabled.
-; Default: Off
-;zend.multibyte = Off
-
-; Allows to set the default encoding for the scripts. This value will be used
-; unless "declare(encoding=...)" directive appears at the top of the script.
-; Only affects if zend.multibyte is set.
-; Default: ""
-;zend.script_encoding =
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL (Show all errors, warnings and notices including coding standards.)
-; E_ALL & ~E_NOTICE (Show all errors, except for notices)
-; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
-; Development Value: E_ALL
-; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
-; http://php.net/error-reporting
-error_reporting = E_ALL
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of formatting the
-; error message as HTML for easier reading. This directive controls whether
-; the error message is formatted as HTML or not.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: On
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set to On *and* docref_root is not empty, then PHP
-; produces clickable error messages that direct to a page describing the error
-; or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty, in which
-; case no links to documentation are generated.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on Windows).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. G,P,C,E & S are abbreviations for the following respective super
-; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
-; paid for the registration of these arrays and because ENV is not as commonly
-; used as the others, ENV is not recommended on productions servers. You
-; can still get access to the environment variables through getenv() should you
-; need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the ENV, REQUEST and SERVER variables are created when they're
-; first used (Just In Time) instead of when the script starts. If these
-; variables are not used within a script, having this directive on will result
-; in a performance gain. The PHP directive register_argc_argv must be disabled
-; for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Whether PHP will read the POST data.
-; This option is enabled by default.
-; Most likely, you won't want to disable this option globally. It causes $_POST
-; and $_FILES to always be empty; the only way you will be able to read the
-; POST data will be through the php://input stream wrapper. This can be useful
-; to proxy requests or to process the POST data in a memory efficient fashion.
-; http://php.net/enable-post-data-reading
-;enable_post_data_reading = Off
-
-; Maximum size of POST data that PHP will accept.
-; Its value may be 0 to disable the limit. It is ignored if POST data reading
-; is disabled through enable_post_data_reading.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "UTF-8"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature. If post reading is disabled through
-; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Directory where the temporary files should be placed.
-; Defaults to the system default (see sys_get_temp_dir)
-; sys_temp_dir = "/tmp"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env =
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[CLI Server]
-; Whether the CLI web server uses ANSI color coding in its terminal output.
-cli_server.color = On
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail().
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-; Log mail to syslog (Event Log on Windows).
-;mail.log = syslog
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use strict session mode.
-; Strict session mode does not accept uninitialized session ID and regenerate
-; session ID if browser sends uninitialized session ID. Strict mode protects
-; applications from session fixation via session adoption vulnerability. It is
-; disabled by default for maximum compatibility, but enabling it is encouraged.
-; https://wiki.php.net/rfc/strict_sessions
-session.use_strict_mode = 0
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 -type f | xargs rm
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-;session.entropy_length = 32
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; Defaults to /dev/urandom
-; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
-; If neither are found at compile time, the default is no entropy file.
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publicly accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; Enable upload progress tracking in $_SESSION
-; Default Value: On
-; Development Value: On
-; Production Value: On
-; http://php.net/session.upload-progress.enabled
-;session.upload_progress.enabled = On
-
-; Cleanup the progress information as soon as all POST data has been read
-; (i.e. upload completed).
-; Default Value: On
-; Development Value: On
-; Production Value: On
-; http://php.net/session.upload-progress.cleanup
-;session.upload_progress.cleanup = On
-
-; A prefix used for the upload progress key in $_SESSION
-; Default Value: "upload_progress_"
-; Development Value: "upload_progress_"
-; Production Value: "upload_progress_"
-; http://php.net/session.upload-progress.prefix
-;session.upload_progress.prefix = "upload_progress_"
-
-; The index name (concatenated with the prefix) in $_SESSION
-; containing the upload progress information
-; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; http://php.net/session.upload-progress.name
-;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
-
-; How frequently the upload progress should be updated.
-; Given either in percentages (per-file), or in bytes
-; Default Value: "1%"
-; Development Value: "1%"
-; Production Value: "1%"
-; http://php.net/session.upload-progress.freq
-;session.upload_progress.freq = "1%"
-
-; The minimum delay between updates, in seconds
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.upload-progress.min-freq
-;session.upload_progress.min_freq = "1"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatibility_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.conf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = UTF-8
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = UTF-8
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = pass
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = On
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[opcache]
-; Determines if Zend OPCache is enabled
-;opcache.enable=0
-
-; Determines if Zend OPCache is enabled for the CLI version of PHP
-;opcache.enable_cli=0
-
-; The OPcache shared memory storage size.
-;opcache.memory_consumption=64
-
-; The amount of memory for interned strings in Mbytes.
-;opcache.interned_strings_buffer=4
-
-; The maximum number of keys (scripts) in the OPcache hash table.
-; Only numbers between 200 and 100000 are allowed.
-;opcache.max_accelerated_files=2000
-
-; The maximum percentage of "wasted" memory until a restart is scheduled.
-;opcache.max_wasted_percentage=5
-
-; When this directive is enabled, the OPcache appends the current working
-; directory to the script key, thus eliminating possible collisions between
-; files with the same name (basename). Disabling the directive improves
-; performance, but may break existing applications.
-;opcache.use_cwd=1
-
-; When disabled, you must reset the OPcache manually or restart the
-; webserver for changes to the filesystem to take effect.
-;opcache.validate_timestamps=1
-
-; How often (in seconds) to check file timestamps for changes to the shared
-; memory storage allocation. ("1" means validate once per second, but only
-; once per request. "0" means always validate)
-;opcache.revalidate_freq=2
-
-; Enables or disables file search in include_path optimization
-;opcache.revalidate_path=0
-
-; If disabled, all PHPDoc comments are dropped from the code to reduce the
-; size of the optimized code.
-;opcache.save_comments=1
-
-; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
-; may be always stored (save_comments=1), but not loaded by applications
-; that don't need them anyway.
-;opcache.load_comments=1
-
-; If enabled, a fast shutdown sequence is used for the accelerated code
-;opcache.fast_shutdown=0
-
-; Allow file existence override (file_exists, etc.) performance feature.
-;opcache.enable_file_override=0
-
-; A bitmask, where each bit enables or disables the appropriate OPcache
-; passes
-;opcache.optimization_level=0xffffffff
-
-;opcache.inherited_hack=1
-;opcache.dups_fix=0
-
-; The location of the OPcache blacklist file (wildcards allowed).
-; Each OPcache blacklist file is a text file that holds the names of files
-; that should not be accelerated. The file format is to add each filename
-; to a new line. The filename may be a full path or just a file prefix
-; (i.e., /var/www/x blacklists all the files and directories in /var/www
-; that start with 'x'). Line starting with a ; are ignored (comments).
-;opcache.blacklist_filename=
-
-; Allows exclusion of large files from being cached. By default all files
-; are cached.
-;opcache.max_file_size=0
-
-; Check the cache checksum each N requests.
-; The default value of "0" means that the checks are disabled.
-;opcache.consistency_checks=0
-
-; How long to wait (in seconds) for a scheduled restart to begin if the cache
-; is not being accessed.
-;opcache.force_restart_timeout=180
-
-; OPcache error_log file name. Empty string assumes "stderr".
-;opcache.error_log=
-
-; All OPcache errors go to the Web server log.
-; By default, only fatal errors (level 0) or errors (level 1) are logged.
-; You can also enable warnings (level 2), info messages (level 3) or
-; debug messages (level 4).
-;opcache.log_verbosity_level=1
-
-; Preferred Shared Memory back-end. Leave empty and let the system decide.
-;opcache.preferred_memory_model=
-
-; Protect the shared memory from unexpected writing during script execution.
-; Useful for internal debugging only.
-;opcache.protect_memory=0
-
-[curl]
-; A default value for the CURLOPT_CAINFO option. This is required to be an
-; absolute path.
-;curl.cainfo =
-
-; Local Variables:
-; tab-width: 4
-; End:
--- /dev/null
+/etc/php/embed-php5.6/ext/opcache.ini
\ No newline at end of file
--- /dev/null
+zend_extension=/usr/lib64/php5.6/lib64/opcache.so
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it is
+; much more verbose when it comes to errors. We recommend using the
+; development version only in development environments, as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+; This is php.ini-development INI file.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: On
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It is
+; generally recommended that <?php and ?> should be used and that this feature
+; should be disabled, as enabling it may result in issues when generating XML
+; documents, however this remains supported for backward compatibility reasons.
+; Note that this directive does not control the <?= shorthand tag, which can be
+; used regardless of this directive.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+; If enabled, scripts may be written in encodings that are incompatible with
+; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
+; encodings. To use this feature, mbstring extension must be enabled.
+; Default: Off
+;zend.multibyte = Off
+
+; Allows to set the default encoding for the scripts. This value will be used
+; unless "declare(encoding=...)" directive appears at the top of the script.
+; Only affects if zend.multibyte is set.
+; Default: ""
+;zend.script_encoding =
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it is automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL (Show all errors, warnings and notices including coding standards.)
+; E_ALL & ~E_NOTICE (Show all errors, except for notices)
+; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+; http://php.net/error-reporting
+error_reporting = E_ALL
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; For production environments, we recommend logging errors rather than
+; sending them to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. We strongly recommend you
+; set this to 'off' for production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of formatting the
+; error message as HTML for easier reading. This directive controls whether
+; the error message is formatted as HTML or not.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: On
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set to On *and* docref_root is not empty, then PHP
+; produces clickable error messages that direct to a page describing the error
+; or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty, in which
+; case no links to documentation are generated.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on Windows).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. G,P,C,E & S are abbreviations for the following respective super
+; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
+; paid for the registration of these arrays and because ENV is not as commonly
+; used as the others, ENV is not recommended on productions servers. You
+; can still get access to the environment variables through getenv() should you
+; need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P & C) should be
+; registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive
+; are specified in the same manner as the variables_order directive,
+; EXCEPT one. Leaving this value empty will cause PHP to use the value set
+; in the variables_order directive. It does not mean it will leave the super
+; globals array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the ENV, REQUEST and SERVER variables are created when they're
+; first used (Just In Time) instead of when the script starts. If these
+; variables are not used within a script, having this directive on will result
+; in a performance gain. The PHP directive register_argc_argv must be disabled
+; for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Whether PHP will read the POST data.
+; This option is enabled by default.
+; Most likely, you won't want to disable this option globally. It causes $_POST
+; and $_FILES to always be empty; the only way you will be able to read the
+; POST data will be through the php://input stream wrapper. This can be useful
+; to proxy requests or to process the POST data in a memory efficient fashion.
+; http://php.net/enable-post-data-reading
+;enable_post_data_reading = Off
+
+; Maximum size of POST data that PHP will accept.
+; Its value may be 0 to disable the limit. It is ignored if POST data reading
+; is disabled through enable_post_data_reading.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to UTF-8.
+; http://php.net/default-charset
+default_charset = "UTF-8"
+
+; PHP internal character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/internal-encoding
+;internal_encoding =
+
+; PHP input character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/input-encoding
+;input_encoding =
+
+; PHP output character encoding is set to empty.
+; If empty, default_charset is used.
+; mbstring or iconv output handler is used.
+; See also output_buffer.
+; http://php.net/output-encoding
+;output_encoding =
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature and it will be removed in a future version.
+; If post reading is disabled through enable_post_data_reading,
+; $HTTP_RAW_POST_DATA is *NOT* populated.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = -1
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Directory where the temporary files should be placed.
+; Defaults to the system default (see sys_get_temp_dir)
+; sys_temp_dir = "/tmp"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env =
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If set to 0, PHP sends Status: header that
+; is supported by Apache. When this option is set to 1, PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8_12c.dll ; Use with Oracle Database 12c Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[CLI Server]
+; Whether the CLI web server uses ANSI color coding in its terminal output.
+cli_server.color = On
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; If empty, default_charset or input_encoding or iconv.input_encoding is used.
+; The precedence is: default_charset < intput_encoding < iconv.input_encoding
+;iconv.input_encoding =
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;iconv.internal_encoding =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; If empty, default_charset or output_encoding or iconv.output_encoding is used.
+; The precedence is: default_charset < output_encoding < iconv.output_encoding
+; To use an output encoding conversion, iconv's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+;iconv.output_encoding =
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail().
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+; Log mail to syslog (Event Log on Windows).
+;mail.log = syslog
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if
+; your OS has problems with many files in one directory, and is
+; a more efficient layout for servers that handle many sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use strict session mode.
+; Strict session mode does not accept uninitialized session ID and regenerate
+; session ID if browser sends uninitialized session ID. Strict mode protects
+; applications from session fixation via session adoption vulnerability. It is
+; disabled by default for maximum compatibility, but enabling it is encouraged.
+; https://wiki.php.net/rfc/strict_sessions
+session.use_strict_mode = 0
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the be-all and end-all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 -type f | xargs rm
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+;session.entropy_length = 32
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; Defaults to /dev/urandom
+; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
+; If neither are found at compile time, the default is no entropy file.
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users' security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; Enable upload progress tracking in $_SESSION
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.enabled
+;session.upload_progress.enabled = On
+
+; Cleanup the progress information as soon as all POST data has been read
+; (i.e. upload completed).
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.cleanup
+;session.upload_progress.cleanup = On
+
+; A prefix used for the upload progress key in $_SESSION
+; Default Value: "upload_progress_"
+; Development Value: "upload_progress_"
+; Production Value: "upload_progress_"
+; http://php.net/session.upload-progress.prefix
+;session.upload_progress.prefix = "upload_progress_"
+
+; The index name (concatenated with the prefix) in $_SESSION
+; containing the upload progress information
+; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; http://php.net/session.upload-progress.name
+;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
+
+; How frequently the upload progress should be updated.
+; Given either in percentages (per-file), or in bytes
+; Default Value: "1%"
+; Development Value: "1%"
+; Production Value: "1%"
+; http://php.net/session.upload-progress.freq
+;session.upload_progress.freq = "1%"
+
+; The minimum delay between updates, in seconds
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.upload-progress.min-freq
+;session.upload_progress.min_freq = "1"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatibility_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; This affects mb_send_mail() and mbstrig.detect_order.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; internal/script encoding.
+; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;mbstring.internal_encoding =
+
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; http input encoding.
+; mbstring.encoding_traslation = On is needed to use this setting.
+; If empty, default_charset or input_encoding or mbstring.input is used.
+; The precedence is: default_charset < intput_encoding < mbsting.http_input
+; http://php.net/mbstring.http-input
+;mbstring.http_input =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; http output encoding.
+; mb_output_handler must be registered as output buffer to function.
+; If empty, default_charset or output_encoding or mbstring.http_output is used.
+; The precedence is: default_charset < output_encoding < mbstring.http_output
+; To use an output encoding conversion, mbstring's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+; http://php.net/mbstring.http-output
+;mbstring.http_output =
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; "auto" detect order is changed according to mbstring.language
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+; Default: Off
+;mbstring.strict_detection = On
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[opcache]
+; Determines if Zend OPCache is enabled
+;opcache.enable=0
+
+; Determines if Zend OPCache is enabled for the CLI version of PHP
+;opcache.enable_cli=0
+
+; The OPcache shared memory storage size.
+;opcache.memory_consumption=64
+
+; The amount of memory for interned strings in Mbytes.
+;opcache.interned_strings_buffer=4
+
+; The maximum number of keys (scripts) in the OPcache hash table.
+; Only numbers between 200 and 100000 are allowed.
+;opcache.max_accelerated_files=2000
+
+; The maximum percentage of "wasted" memory until a restart is scheduled.
+;opcache.max_wasted_percentage=5
+
+; When this directive is enabled, the OPcache appends the current working
+; directory to the script key, thus eliminating possible collisions between
+; files with the same name (basename). Disabling the directive improves
+; performance, but may break existing applications.
+;opcache.use_cwd=1
+
+; When disabled, you must reset the OPcache manually or restart the
+; webserver for changes to the filesystem to take effect.
+;opcache.validate_timestamps=1
+
+; How often (in seconds) to check file timestamps for changes to the shared
+; memory storage allocation. ("1" means validate once per second, but only
+; once per request. "0" means always validate)
+;opcache.revalidate_freq=2
+
+; Enables or disables file search in include_path optimization
+;opcache.revalidate_path=0
+
+; If disabled, all PHPDoc comments are dropped from the code to reduce the
+; size of the optimized code.
+;opcache.save_comments=1
+
+; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
+; may be always stored (save_comments=1), but not loaded by applications
+; that don't need them anyway.
+;opcache.load_comments=1
+
+; If enabled, a fast shutdown sequence is used for the accelerated code
+;opcache.fast_shutdown=0
+
+; Allow file existence override (file_exists, etc.) performance feature.
+;opcache.enable_file_override=0
+
+; A bitmask, where each bit enables or disables the appropriate OPcache
+; passes
+;opcache.optimization_level=0xffffffff
+
+;opcache.inherited_hack=1
+;opcache.dups_fix=0
+
+; The location of the OPcache blacklist file (wildcards allowed).
+; Each OPcache blacklist file is a text file that holds the names of files
+; that should not be accelerated. The file format is to add each filename
+; to a new line. The filename may be a full path or just a file prefix
+; (i.e., /var/www/x blacklists all the files and directories in /var/www
+; that start with 'x'). Line starting with a ; are ignored (comments).
+;opcache.blacklist_filename=
+
+; Allows exclusion of large files from being cached. By default all files
+; are cached.
+;opcache.max_file_size=0
+
+; Check the cache checksum each N requests.
+; The default value of "0" means that the checks are disabled.
+;opcache.consistency_checks=0
+
+; How long to wait (in seconds) for a scheduled restart to begin if the cache
+; is not being accessed.
+;opcache.force_restart_timeout=180
+
+; OPcache error_log file name. Empty string assumes "stderr".
+;opcache.error_log=
+
+; All OPcache errors go to the Web server log.
+; By default, only fatal errors (level 0) or errors (level 1) are logged.
+; You can also enable warnings (level 2), info messages (level 3) or
+; debug messages (level 4).
+;opcache.log_verbosity_level=1
+
+; Preferred Shared Memory back-end. Leave empty and let the system decide.
+;opcache.preferred_memory_model=
+
+; Protect the shared memory from unexpected writing during script execution.
+; Useful for internal debugging only.
+;opcache.protect_memory=0
+
+[curl]
+; A default value for the CURLOPT_CAINFO option. This is required to be an
+; absolute path.
+;curl.cainfo =
+
+[openssl]
+; The location of a Certificate Authority (CA) file on the local filesystem
+; to use when verifying the identity of SSL/TLS peers. Most users should
+; not specify a value for this directive as PHP will attempt to use the
+; OS-managed cert stores in its absence. If specified, this value may still
+; be overridden on a per-stream basis via the "cafile" SSL stream context
+; option.
+;openssl.cafile=
+
+; If openssl.cafile is not specified or if the CA file is not found, the
+; directory pointed to by openssl.capath is searched for a suitable
+; certificate. This value must be a correctly hashed certificate directory.
+; Most users should not specify a value for this directive as PHP will
+; attempt to use the OS-managed cert stores in its absence. If specified,
+; this value may still be overridden on a per-stream basis via the "capath"
+; SSL stream context option.
+;openssl.capath=
+
+; Local Variables:
+; tab-width: 4
+; End:
+++ /dev/null
-/etc/php/fpm-php5.5/ext/opcache.ini
\ No newline at end of file
+++ /dev/null
-zend_extension=/usr/lib64/php5.5/lib64/opcache.so
+++ /dev/null
-;;;;;;;;;;;;;;;;;;;;;
-; FPM Configuration ;
-;;;;;;;;;;;;;;;;;;;;;
-
-; All relative paths in this configuration file are relative to PHP's install
-; prefix (/usr/lib/php5.3). This prefix can be dynamicaly changed by using the
-; '-p' argument from the command line.
-
-; Include one or more files. If glob(3) exists, it is used to include a bunch of
-; files from a glob(3) pattern. This directive can be used everywhere in the
-; file.
-; Relative path can also be used. They will be prefixed by:
-; - the global prefix if it's been set (-p arguement)
-; - /usr/lib/php5.3 otherwise
-;include=/etc/php/fpm-php5.3/fpm.d/*.conf
-
-;;;;;;;;;;;;;;;;;;
-; Global Options ;
-;;;;;;;;;;;;;;;;;;
-
-[global]
-; Pid file
-; Note: the default prefix is /var/lib
-; Default Value: none
-; Warning: pid file is overriden by the Gentoo init script.
-; FPM will refuse to start if you uncomment this settingi and make use of the
-; init script.
-; pid = /var/run/php-fpm.pid
-
-; Error log file
-; Note: the default prefix is /var/lib
-; Default Value: log/php-fpm.log
-error_log = /var/log/php-fpm.log
-
-; Log level
-; Possible Values: alert, error, warning, notice, debug
-; Default Value: notice
-;log_level = notice
-
-; If this number of child processes exit with SIGSEGV or SIGBUS within the time
-; interval set by emergency_restart_interval then FPM will restart. A value
-; of '0' means 'Off'.
-; Default Value: 0
-;emergency_restart_threshold = 0
-
-; Interval of time used by emergency_restart_interval to determine when
-; a graceful restart will be initiated. This can be useful to work around
-; accidental corruptions in an accelerator's shared memory.
-; Available Units: s(econds), m(inutes), h(ours), or d(ays)
-; Default Unit: seconds
-; Default Value: 0
-;emergency_restart_interval = 0
-
-; Time limit for child processes to wait for a reaction on signals from master.
-; Available units: s(econds), m(inutes), h(ours), or d(ays)
-; Default Unit: seconds
-; Default Value: 0
-;process_control_timeout = 0
-
-; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
-; Default Value: yes
-;daemonize = yes
-
-;;;;;;;;;;;;;;;;;;;;
-; Pool Definitions ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Multiple pools of child processes may be started with different listening
-; ports and different management options. The name of the pool will be
-; used in logs and stats. There is no limitation on the number of pools which
-; FPM can handle. Your system will tell you anyway :)
-
-; Start a new pool named 'www'.
-; the variable $pool can we used in any directive and will be replaced by the
-; pool name ('www' here)
-[www]
-
-; Per pool prefix
-; It only applies on the following directives:
-; - 'slowlog'
-; - 'listen' (unixsocket)
-; - 'chroot'
-; - 'chdir'
-; - 'php_values'
-; - 'php_admin_values'
-; When not set, the global prefix (or /usr/lib/php5.3) applies instead.
-; Note: This directive can also be relative to the global prefix.
-; Default Value: none
-;prefix = /path/to/pools/$pool
-
-; The address on which to accept FastCGI requests.
-; Valid syntaxes are:
-; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
-; a specific port;
-; 'port' - to listen on a TCP socket to all addresses on a
-; specific port;
-; '/path/to/unix/socket' - to listen on a unix socket.
-; Note: This value is mandatory.
-listen = 127.0.0.1:9000
-
-; Set listen(2) backlog. A value of '-1' means unlimited.
-; Default Value: 128 (-1 on FreeBSD and OpenBSD)
-;listen.backlog = -1
-
-; List of ipv4 addresses of FastCGI clients which are allowed to connect.
-; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
-; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
-; must be separated by a comma. If this value is left blank, connections will be
-; accepted from any ip address.
-; Default Value: any
-;listen.allowed_clients = 127.0.0.1
-
-; Set permissions for unix socket, if one is used. In Linux, read/write
-; permissions must be set in order to allow connections from a web server. Many
-; BSD-derived systems allow connections regardless of permissions.
-; Default Values: user and group are set as the running user
-; mode is set to 0666
-;listen.owner = nobody
-;listen.group = nobody
-;listen.mode = 0666
-
-; Unix user/group of processes
-; Note: The user is mandatory. If the group is not set, the default user's group
-; will be used.
-user = nobody
-group = nobody
-
-; Choose how the process manager will control the number of child processes.
-; Possible Values:
-; static - a fixed number (pm.max_children) of child processes;
-; dynamic - the number of child processes are set dynamically based on the
-; following directives:
-; pm.max_children - the maximum number of children that can
-; be alive at the same time.
-; pm.start_servers - the number of children created on startup.
-; pm.min_spare_servers - the minimum number of children in 'idle'
-; state (waiting to process). If the number
-; of 'idle' processes is less than this
-; number then some children will be created.
-; pm.max_spare_servers - the maximum number of children in 'idle'
-; state (waiting to process). If the number
-; of 'idle' processes is greater than this
-; number then some children will be killed.
-; Note: This value is mandatory.
-pm = dynamic
-
-; The number of child processes to be created when pm is set to 'static' and the
-; maximum number of child processes to be created when pm is set to 'dynamic'.
-; This value sets the limit on the number of simultaneous requests that will be
-; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
-; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
-; CGI.
-; Note: Used when pm is set to either 'static' or 'dynamic'
-; Note: This value is mandatory.
-pm.max_children = 50
-
-; The number of child processes created on startup.
-; Note: Used only when pm is set to 'dynamic'
-; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
-;pm.start_servers = 20
-
-; The desired minimum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.min_spare_servers = 5
-
-; The desired maximum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.max_spare_servers = 35
-
-; The number of requests each child process should execute before respawning.
-; This can be useful to work around memory leaks in 3rd party libraries. For
-; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
-; Default Value: 0
-;pm.max_requests = 500
-
-; The URI to view the FPM status page. If this value is not set, no URI will be
-; recognized as a status page. By default, the status page shows the following
-; information:
-; accepted conn - the number of request accepted by the pool;
-; pool - the name of the pool;
-; process manager - static or dynamic;
-; idle processes - the number of idle processes;
-; active processes - the number of active processes;
-; total processes - the number of idle + active processes.
-; max children reached - number of times, the process limit has been reached,
-; when pm tries to start more children (works only for
-; pm 'dynamic')
-; The values of 'idle processes', 'active processes' and 'total processes' are
-; updated each second. The value of 'accepted conn' is updated in real time.
-; Example output:
-; accepted conn: 12073
-; pool: www
-; process manager: static
-; idle processes: 35
-; active processes: 65
-; total processes: 100
-; max children reached: 1
-; By default the status page output is formatted as text/plain. Passing either
-; 'html' or 'json' as a query string will return the corresponding output
-; syntax. Example:
-; http://www.foo.bar/status
-; http://www.foo.bar/status?json
-; http://www.foo.bar/status?html
-; Note: The value must start with a leading slash (/). The value can be
-; anything, but it may not be a good idea to use the .php extension or it
-; may conflict with a real PHP file.
-; Default Value: not set
-;pm.status_path = /status
-
-; The ping URI to call the monitoring page of FPM. If this value is not set, no
-; URI will be recognized as a ping page. This could be used to test from outside
-; that FPM is alive and responding, or to
-; - create a graph of FPM availability (rrd or such);
-; - remove a server from a group if it is not responding (load balancing);
-; - trigger alerts for the operating team (24/7).
-; Note: The value must start with a leading slash (/). The value can be
-; anything, but it may not be a good idea to use the .php extension or it
-; may conflict with a real PHP file.
-; Default Value: not set
-;ping.path = /ping
-
-; This directive may be used to customize the response of a ping request. The
-; response is formatted as text/plain with a 200 response code.
-; Default Value: pong
-;ping.response = pong
-
-; The timeout for serving a single request after which the worker process will
-; be killed. This option should be used when the 'max_execution_time' ini option
-; does not stop script execution for some reason. A value of '0' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_terminate_timeout = 0
-
-; The timeout for serving a single request after which a PHP backtrace will be
-; dumped to the 'slowlog' file. A value of '0s' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_slowlog_timeout = 0
-
-; The log file for slow requests
-; Default Value: not set
-; Note: slowlog is mandatory if request_slowlog_timeout is set
-;slowlog = /var/log/php-fpm-$pool.log.slow
-
-; Set open file descriptor rlimit.
-; Default Value: system defined value
-;rlimit_files = 1024
-
-; Set max core size rlimit.
-; Possible Values: 'unlimited' or an integer greater or equal to 0
-; Default Value: system defined value
-;rlimit_core = 0
-
-; Chroot to this directory at the start. This value must be defined as an
-; absolute path. When this value is not set, chroot is not used.
-; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
-; of its subdirectories. If the pool prefix is not set, the global prefix
-; will be used instead.
-; Note: chrooting is a great security feature and should be used whenever
-; possible. However, all PHP paths will be relative to the chroot
-; (error_log, sessions.save_path, ...).
-; Default Value: not set
-;chroot =
-
-; Chdir to this directory at the start.
-; Note: relative path can be used.
-; Default Value: current directory or / when chroot
-;chdir = /var/www
-
-; Redirect worker stdout and stderr into main error log. If not set, stdout and
-; stderr will be redirected to /dev/null according to FastCGI specs.
-; Note: on highloaded environement, this can cause some delay in the page
-; process time (several ms).
-; Default Value: no
-;catch_workers_output = yes
-
-; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
-; the current environment.
-; Default Value: clean env
-;env[HOSTNAME] = $HOSTNAME
-;env[PATH] = /usr/local/bin:/usr/bin:/bin
-;env[TMP] = /tmp
-;env[TMPDIR] = /tmp
-;env[TEMP] = /tmp
-
-; Additional php.ini defines, specific to this pool of workers. These settings
-; overwrite the values previously defined in the php.ini. The directives are the
-; same as the PHP SAPI:
-; php_value/php_flag - you can set classic ini defines which can
-; be overwritten from PHP call 'ini_set'.
-; php_admin_value/php_admin_flag - these directives won't be overwritten by
-; PHP call 'ini_set'
-; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
-
-; Defining 'extension' will load the corresponding shared extension from
-; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
-; overwrite previously defined php.ini values, but will append the new value
-; instead.
-
-; Note: path INI options can be relative and will be expanded with the prefix
-; (pool, global or /usr/lib/php5.3)
-
-; Default Value: nothing is defined by default except the values in php.ini and
-; specified at startup with the -d argument
-;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
-;php_flag[display_errors] = off
-;php_admin_value[error_log] = /var/log/fpm-php.www.log
-;php_admin_flag[log_errors] = on
-;php_admin_value[memory_limit] = 32M
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-; This is php.ini-development INI file.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
-; Development Value: E_ALL
-; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: On
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It is
-; generally recommended that <?php and ?> should be used and that this feature
-; should be disabled, as enabling it may result in issues when generating XML
-; documents, however this remains supported for backward compatibility reasons.
-; Note that this directive does not control the <?= shorthand tag, which can be
-; used regardless of this directive.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 17
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
-zend.enable_gc = On
-
-; If enabled, scripts may be written in encodings that are incompatible with
-; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
-; encodings. To use this feature, mbstring extension must be enabled.
-; Default: Off
-;zend.multibyte = Off
-
-; Allows to set the default encoding for the scripts. This value will be used
-; unless "declare(encoding=...)" directive appears at the top of the script.
-; Only affects if zend.multibyte is set.
-; Default: ""
-;zend.script_encoding =
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL (Show all errors, warnings and notices including coding standards.)
-; E_ALL & ~E_NOTICE (Show all errors, except for notices)
-; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
-; Development Value: E_ALL
-; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
-; http://php.net/error-reporting
-error_reporting = E_ALL
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of formatting the
-; error message as HTML for easier reading. This directive controls whether
-; the error message is formatted as HTML or not.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: On
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set to On *and* docref_root is not empty, then PHP
-; produces clickable error messages that direct to a page describing the error
-; or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty, in which
-; case no links to documentation are generated.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on Windows).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. G,P,C,E & S are abbreviations for the following respective super
-; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
-; paid for the registration of these arrays and because ENV is not as commonly
-; used as the others, ENV is not recommended on productions servers. You
-; can still get access to the environment variables through getenv() should you
-; need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the ENV, REQUEST and SERVER variables are created when they're
-; first used (Just In Time) instead of when the script starts. If these
-; variables are not used within a script, having this directive on will result
-; in a performance gain. The PHP directive register_argc_argv must be disabled
-; for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Whether PHP will read the POST data.
-; This option is enabled by default.
-; Most likely, you won't want to disable this option globally. It causes $_POST
-; and $_FILES to always be empty; the only way you will be able to read the
-; POST data will be through the php://input stream wrapper. This can be useful
-; to proxy requests or to process the POST data in a memory efficient fashion.
-; http://php.net/enable-post-data-reading
-;enable_post_data_reading = Off
-
-; Maximum size of POST data that PHP will accept.
-; Its value may be 0 to disable the limit. It is ignored if POST data reading
-; is disabled through enable_post_data_reading.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "UTF-8"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature. If post reading is disabled through
-; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Directory where the temporary files should be placed.
-; Defaults to the system default (see sys_get_temp_dir)
-; sys_temp_dir = "/tmp"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env =
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[CLI Server]
-; Whether the CLI web server uses ANSI color coding in its terminal output.
-cli_server.color = On
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail().
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-; Log mail to syslog (Event Log on Windows).
-;mail.log = syslog
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use strict session mode.
-; Strict session mode does not accept uninitialized session ID and regenerate
-; session ID if browser sends uninitialized session ID. Strict mode protects
-; applications from session fixation via session adoption vulnerability. It is
-; disabled by default for maximum compatibility, but enabling it is encouraged.
-; https://wiki.php.net/rfc/strict_sessions
-session.use_strict_mode = 0
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 -type f | xargs rm
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-;session.entropy_length = 32
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; Defaults to /dev/urandom
-; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
-; If neither are found at compile time, the default is no entropy file.
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publicly accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; Enable upload progress tracking in $_SESSION
-; Default Value: On
-; Development Value: On
-; Production Value: On
-; http://php.net/session.upload-progress.enabled
-;session.upload_progress.enabled = On
-
-; Cleanup the progress information as soon as all POST data has been read
-; (i.e. upload completed).
-; Default Value: On
-; Development Value: On
-; Production Value: On
-; http://php.net/session.upload-progress.cleanup
-;session.upload_progress.cleanup = On
-
-; A prefix used for the upload progress key in $_SESSION
-; Default Value: "upload_progress_"
-; Development Value: "upload_progress_"
-; Production Value: "upload_progress_"
-; http://php.net/session.upload-progress.prefix
-;session.upload_progress.prefix = "upload_progress_"
-
-; The index name (concatenated with the prefix) in $_SESSION
-; containing the upload progress information
-; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; http://php.net/session.upload-progress.name
-;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
-
-; How frequently the upload progress should be updated.
-; Given either in percentages (per-file), or in bytes
-; Default Value: "1%"
-; Development Value: "1%"
-; Production Value: "1%"
-; http://php.net/session.upload-progress.freq
-;session.upload_progress.freq = "1%"
-
-; The minimum delay between updates, in seconds
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.upload-progress.min-freq
-;session.upload_progress.min_freq = "1"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatibility_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.conf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = UTF-8
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = UTF-8
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = pass
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = On
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[opcache]
-; Determines if Zend OPCache is enabled
-;opcache.enable=0
-
-; Determines if Zend OPCache is enabled for the CLI version of PHP
-;opcache.enable_cli=0
-
-; The OPcache shared memory storage size.
-;opcache.memory_consumption=64
-
-; The amount of memory for interned strings in Mbytes.
-;opcache.interned_strings_buffer=4
-
-; The maximum number of keys (scripts) in the OPcache hash table.
-; Only numbers between 200 and 100000 are allowed.
-;opcache.max_accelerated_files=2000
-
-; The maximum percentage of "wasted" memory until a restart is scheduled.
-;opcache.max_wasted_percentage=5
-
-; When this directive is enabled, the OPcache appends the current working
-; directory to the script key, thus eliminating possible collisions between
-; files with the same name (basename). Disabling the directive improves
-; performance, but may break existing applications.
-;opcache.use_cwd=1
-
-; When disabled, you must reset the OPcache manually or restart the
-; webserver for changes to the filesystem to take effect.
-;opcache.validate_timestamps=1
-
-; How often (in seconds) to check file timestamps for changes to the shared
-; memory storage allocation. ("1" means validate once per second, but only
-; once per request. "0" means always validate)
-;opcache.revalidate_freq=2
-
-; Enables or disables file search in include_path optimization
-;opcache.revalidate_path=0
-
-; If disabled, all PHPDoc comments are dropped from the code to reduce the
-; size of the optimized code.
-;opcache.save_comments=1
-
-; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
-; may be always stored (save_comments=1), but not loaded by applications
-; that don't need them anyway.
-;opcache.load_comments=1
-
-; If enabled, a fast shutdown sequence is used for the accelerated code
-;opcache.fast_shutdown=0
-
-; Allow file existence override (file_exists, etc.) performance feature.
-;opcache.enable_file_override=0
-
-; A bitmask, where each bit enables or disables the appropriate OPcache
-; passes
-;opcache.optimization_level=0xffffffff
-
-;opcache.inherited_hack=1
-;opcache.dups_fix=0
-
-; The location of the OPcache blacklist file (wildcards allowed).
-; Each OPcache blacklist file is a text file that holds the names of files
-; that should not be accelerated. The file format is to add each filename
-; to a new line. The filename may be a full path or just a file prefix
-; (i.e., /var/www/x blacklists all the files and directories in /var/www
-; that start with 'x'). Line starting with a ; are ignored (comments).
-;opcache.blacklist_filename=
-
-; Allows exclusion of large files from being cached. By default all files
-; are cached.
-;opcache.max_file_size=0
-
-; Check the cache checksum each N requests.
-; The default value of "0" means that the checks are disabled.
-;opcache.consistency_checks=0
-
-; How long to wait (in seconds) for a scheduled restart to begin if the cache
-; is not being accessed.
-;opcache.force_restart_timeout=180
-
-; OPcache error_log file name. Empty string assumes "stderr".
-;opcache.error_log=
-
-; All OPcache errors go to the Web server log.
-; By default, only fatal errors (level 0) or errors (level 1) are logged.
-; You can also enable warnings (level 2), info messages (level 3) or
-; debug messages (level 4).
-;opcache.log_verbosity_level=1
-
-; Preferred Shared Memory back-end. Leave empty and let the system decide.
-;opcache.preferred_memory_model=
-
-; Protect the shared memory from unexpected writing during script execution.
-; Useful for internal debugging only.
-;opcache.protect_memory=0
-
-[curl]
-; A default value for the CURLOPT_CAINFO option. This is required to be an
-; absolute path.
-;curl.cainfo =
-
-; Local Variables:
-; tab-width: 4
-; End:
--- /dev/null
+/etc/php/fpm-php5.6/ext/opcache.ini
\ No newline at end of file
--- /dev/null
+zend_extension=/usr/lib64/php5.6/lib64/opcache.so
--- /dev/null
+;;;;;;;;;;;;;;;;;;;;;
+; FPM Configuration ;
+;;;;;;;;;;;;;;;;;;;;;
+
+; All relative paths in this configuration file are relative to PHP's install
+; prefix (/usr/lib/php5.3). This prefix can be dynamicaly changed by using the
+; '-p' argument from the command line.
+
+; Include one or more files. If glob(3) exists, it is used to include a bunch of
+; files from a glob(3) pattern. This directive can be used everywhere in the
+; file.
+; Relative path can also be used. They will be prefixed by:
+; - the global prefix if it's been set (-p arguement)
+; - /usr/lib/php5.3 otherwise
+;include=/etc/php/fpm-php5.3/fpm.d/*.conf
+
+;;;;;;;;;;;;;;;;;;
+; Global Options ;
+;;;;;;;;;;;;;;;;;;
+
+[global]
+; Pid file
+; Note: the default prefix is /var/lib
+; Default Value: none
+; Warning: pid file is overriden by the Gentoo init script.
+; FPM will refuse to start if you uncomment this settingi and make use of the
+; init script.
+; pid = /var/run/php-fpm.pid
+
+; Error log file
+; Note: the default prefix is /var/lib
+; Default Value: log/php-fpm.log
+error_log = /var/log/php-fpm.log
+
+; Log level
+; Possible Values: alert, error, warning, notice, debug
+; Default Value: notice
+;log_level = notice
+
+; If this number of child processes exit with SIGSEGV or SIGBUS within the time
+; interval set by emergency_restart_interval then FPM will restart. A value
+; of '0' means 'Off'.
+; Default Value: 0
+;emergency_restart_threshold = 0
+
+; Interval of time used by emergency_restart_interval to determine when
+; a graceful restart will be initiated. This can be useful to work around
+; accidental corruptions in an accelerator's shared memory.
+; Available Units: s(econds), m(inutes), h(ours), or d(ays)
+; Default Unit: seconds
+; Default Value: 0
+;emergency_restart_interval = 0
+
+; Time limit for child processes to wait for a reaction on signals from master.
+; Available units: s(econds), m(inutes), h(ours), or d(ays)
+; Default Unit: seconds
+; Default Value: 0
+;process_control_timeout = 0
+
+; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
+; Default Value: yes
+;daemonize = yes
+
+;;;;;;;;;;;;;;;;;;;;
+; Pool Definitions ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Multiple pools of child processes may be started with different listening
+; ports and different management options. The name of the pool will be
+; used in logs and stats. There is no limitation on the number of pools which
+; FPM can handle. Your system will tell you anyway :)
+
+; Start a new pool named 'www'.
+; the variable $pool can we used in any directive and will be replaced by the
+; pool name ('www' here)
+[www]
+
+; Per pool prefix
+; It only applies on the following directives:
+; - 'slowlog'
+; - 'listen' (unixsocket)
+; - 'chroot'
+; - 'chdir'
+; - 'php_values'
+; - 'php_admin_values'
+; When not set, the global prefix (or /usr/lib/php5.3) applies instead.
+; Note: This directive can also be relative to the global prefix.
+; Default Value: none
+;prefix = /path/to/pools/$pool
+
+; The address on which to accept FastCGI requests.
+; Valid syntaxes are:
+; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
+; a specific port;
+; 'port' - to listen on a TCP socket to all addresses on a
+; specific port;
+; '/path/to/unix/socket' - to listen on a unix socket.
+; Note: This value is mandatory.
+listen = 127.0.0.1:9000
+
+; Set listen(2) backlog. A value of '-1' means unlimited.
+; Default Value: 128 (-1 on FreeBSD and OpenBSD)
+;listen.backlog = -1
+
+; List of ipv4 addresses of FastCGI clients which are allowed to connect.
+; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
+; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
+; must be separated by a comma. If this value is left blank, connections will be
+; accepted from any ip address.
+; Default Value: any
+;listen.allowed_clients = 127.0.0.1
+
+; Set permissions for unix socket, if one is used. In Linux, read/write
+; permissions must be set in order to allow connections from a web server. Many
+; BSD-derived systems allow connections regardless of permissions.
+; Default Values: user and group are set as the running user
+; mode is set to 0666
+;listen.owner = nobody
+;listen.group = nobody
+;listen.mode = 0666
+
+; Unix user/group of processes
+; Note: The user is mandatory. If the group is not set, the default user's group
+; will be used.
+user = nobody
+group = nobody
+
+; Choose how the process manager will control the number of child processes.
+; Possible Values:
+; static - a fixed number (pm.max_children) of child processes;
+; dynamic - the number of child processes are set dynamically based on the
+; following directives:
+; pm.max_children - the maximum number of children that can
+; be alive at the same time.
+; pm.start_servers - the number of children created on startup.
+; pm.min_spare_servers - the minimum number of children in 'idle'
+; state (waiting to process). If the number
+; of 'idle' processes is less than this
+; number then some children will be created.
+; pm.max_spare_servers - the maximum number of children in 'idle'
+; state (waiting to process). If the number
+; of 'idle' processes is greater than this
+; number then some children will be killed.
+; Note: This value is mandatory.
+pm = dynamic
+
+; The number of child processes to be created when pm is set to 'static' and the
+; maximum number of child processes to be created when pm is set to 'dynamic'.
+; This value sets the limit on the number of simultaneous requests that will be
+; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
+; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
+; CGI.
+; Note: Used when pm is set to either 'static' or 'dynamic'
+; Note: This value is mandatory.
+pm.max_children = 50
+
+; The number of child processes created on startup.
+; Note: Used only when pm is set to 'dynamic'
+; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
+;pm.start_servers = 20
+
+; The desired minimum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.min_spare_servers = 5
+
+; The desired maximum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.max_spare_servers = 35
+
+; The number of requests each child process should execute before respawning.
+; This can be useful to work around memory leaks in 3rd party libraries. For
+; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
+; Default Value: 0
+;pm.max_requests = 500
+
+; The URI to view the FPM status page. If this value is not set, no URI will be
+; recognized as a status page. By default, the status page shows the following
+; information:
+; accepted conn - the number of request accepted by the pool;
+; pool - the name of the pool;
+; process manager - static or dynamic;
+; idle processes - the number of idle processes;
+; active processes - the number of active processes;
+; total processes - the number of idle + active processes.
+; max children reached - number of times, the process limit has been reached,
+; when pm tries to start more children (works only for
+; pm 'dynamic')
+; The values of 'idle processes', 'active processes' and 'total processes' are
+; updated each second. The value of 'accepted conn' is updated in real time.
+; Example output:
+; accepted conn: 12073
+; pool: www
+; process manager: static
+; idle processes: 35
+; active processes: 65
+; total processes: 100
+; max children reached: 1
+; By default the status page output is formatted as text/plain. Passing either
+; 'html' or 'json' as a query string will return the corresponding output
+; syntax. Example:
+; http://www.foo.bar/status
+; http://www.foo.bar/status?json
+; http://www.foo.bar/status?html
+; Note: The value must start with a leading slash (/). The value can be
+; anything, but it may not be a good idea to use the .php extension or it
+; may conflict with a real PHP file.
+; Default Value: not set
+;pm.status_path = /status
+
+; The ping URI to call the monitoring page of FPM. If this value is not set, no
+; URI will be recognized as a ping page. This could be used to test from outside
+; that FPM is alive and responding, or to
+; - create a graph of FPM availability (rrd or such);
+; - remove a server from a group if it is not responding (load balancing);
+; - trigger alerts for the operating team (24/7).
+; Note: The value must start with a leading slash (/). The value can be
+; anything, but it may not be a good idea to use the .php extension or it
+; may conflict with a real PHP file.
+; Default Value: not set
+;ping.path = /ping
+
+; This directive may be used to customize the response of a ping request. The
+; response is formatted as text/plain with a 200 response code.
+; Default Value: pong
+;ping.response = pong
+
+; The timeout for serving a single request after which the worker process will
+; be killed. This option should be used when the 'max_execution_time' ini option
+; does not stop script execution for some reason. A value of '0' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_terminate_timeout = 0
+
+; The timeout for serving a single request after which a PHP backtrace will be
+; dumped to the 'slowlog' file. A value of '0s' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_slowlog_timeout = 0
+
+; The log file for slow requests
+; Default Value: not set
+; Note: slowlog is mandatory if request_slowlog_timeout is set
+;slowlog = /var/log/php-fpm-$pool.log.slow
+
+; Set open file descriptor rlimit.
+; Default Value: system defined value
+;rlimit_files = 1024
+
+; Set max core size rlimit.
+; Possible Values: 'unlimited' or an integer greater or equal to 0
+; Default Value: system defined value
+;rlimit_core = 0
+
+; Chroot to this directory at the start. This value must be defined as an
+; absolute path. When this value is not set, chroot is not used.
+; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
+; of its subdirectories. If the pool prefix is not set, the global prefix
+; will be used instead.
+; Note: chrooting is a great security feature and should be used whenever
+; possible. However, all PHP paths will be relative to the chroot
+; (error_log, sessions.save_path, ...).
+; Default Value: not set
+;chroot =
+
+; Chdir to this directory at the start.
+; Note: relative path can be used.
+; Default Value: current directory or / when chroot
+;chdir = /var/www
+
+; Redirect worker stdout and stderr into main error log. If not set, stdout and
+; stderr will be redirected to /dev/null according to FastCGI specs.
+; Note: on highloaded environement, this can cause some delay in the page
+; process time (several ms).
+; Default Value: no
+;catch_workers_output = yes
+
+; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
+; the current environment.
+; Default Value: clean env
+;env[HOSTNAME] = $HOSTNAME
+;env[PATH] = /usr/local/bin:/usr/bin:/bin
+;env[TMP] = /tmp
+;env[TMPDIR] = /tmp
+;env[TEMP] = /tmp
+
+; Additional php.ini defines, specific to this pool of workers. These settings
+; overwrite the values previously defined in the php.ini. The directives are the
+; same as the PHP SAPI:
+; php_value/php_flag - you can set classic ini defines which can
+; be overwritten from PHP call 'ini_set'.
+; php_admin_value/php_admin_flag - these directives won't be overwritten by
+; PHP call 'ini_set'
+; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
+
+; Defining 'extension' will load the corresponding shared extension from
+; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
+; overwrite previously defined php.ini values, but will append the new value
+; instead.
+
+; Note: path INI options can be relative and will be expanded with the prefix
+; (pool, global or /usr/lib/php5.3)
+
+; Default Value: nothing is defined by default except the values in php.ini and
+; specified at startup with the -d argument
+;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
+;php_flag[display_errors] = off
+;php_admin_value[error_log] = /var/log/fpm-php.www.log
+;php_admin_flag[log_errors] = on
+;php_admin_value[memory_limit] = 32M
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it is
+; much more verbose when it comes to errors. We recommend using the
+; development version only in development environments, as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+; This is php.ini-development INI file.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: On
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It is
+; generally recommended that <?php and ?> should be used and that this feature
+; should be disabled, as enabling it may result in issues when generating XML
+; documents, however this remains supported for backward compatibility reasons.
+; Note that this directive does not control the <?= shorthand tag, which can be
+; used regardless of this directive.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+; If enabled, scripts may be written in encodings that are incompatible with
+; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
+; encodings. To use this feature, mbstring extension must be enabled.
+; Default: Off
+;zend.multibyte = Off
+
+; Allows to set the default encoding for the scripts. This value will be used
+; unless "declare(encoding=...)" directive appears at the top of the script.
+; Only affects if zend.multibyte is set.
+; Default: ""
+;zend.script_encoding =
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it is automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL (Show all errors, warnings and notices including coding standards.)
+; E_ALL & ~E_NOTICE (Show all errors, except for notices)
+; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+; http://php.net/error-reporting
+error_reporting = E_ALL
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; For production environments, we recommend logging errors rather than
+; sending them to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. We strongly recommend you
+; set this to 'off' for production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of formatting the
+; error message as HTML for easier reading. This directive controls whether
+; the error message is formatted as HTML or not.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: On
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set to On *and* docref_root is not empty, then PHP
+; produces clickable error messages that direct to a page describing the error
+; or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty, in which
+; case no links to documentation are generated.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on Windows).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. G,P,C,E & S are abbreviations for the following respective super
+; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
+; paid for the registration of these arrays and because ENV is not as commonly
+; used as the others, ENV is not recommended on productions servers. You
+; can still get access to the environment variables through getenv() should you
+; need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P & C) should be
+; registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive
+; are specified in the same manner as the variables_order directive,
+; EXCEPT one. Leaving this value empty will cause PHP to use the value set
+; in the variables_order directive. It does not mean it will leave the super
+; globals array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the ENV, REQUEST and SERVER variables are created when they're
+; first used (Just In Time) instead of when the script starts. If these
+; variables are not used within a script, having this directive on will result
+; in a performance gain. The PHP directive register_argc_argv must be disabled
+; for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Whether PHP will read the POST data.
+; This option is enabled by default.
+; Most likely, you won't want to disable this option globally. It causes $_POST
+; and $_FILES to always be empty; the only way you will be able to read the
+; POST data will be through the php://input stream wrapper. This can be useful
+; to proxy requests or to process the POST data in a memory efficient fashion.
+; http://php.net/enable-post-data-reading
+;enable_post_data_reading = Off
+
+; Maximum size of POST data that PHP will accept.
+; Its value may be 0 to disable the limit. It is ignored if POST data reading
+; is disabled through enable_post_data_reading.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to UTF-8.
+; http://php.net/default-charset
+default_charset = "UTF-8"
+
+; PHP internal character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/internal-encoding
+;internal_encoding =
+
+; PHP input character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/input-encoding
+;input_encoding =
+
+; PHP output character encoding is set to empty.
+; If empty, default_charset is used.
+; mbstring or iconv output handler is used.
+; See also output_buffer.
+; http://php.net/output-encoding
+;output_encoding =
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature and it will be removed in a future version.
+; If post reading is disabled through enable_post_data_reading,
+; $HTTP_RAW_POST_DATA is *NOT* populated.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = -1
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Directory where the temporary files should be placed.
+; Defaults to the system default (see sys_get_temp_dir)
+; sys_temp_dir = "/tmp"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env =
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If set to 0, PHP sends Status: header that
+; is supported by Apache. When this option is set to 1, PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8_12c.dll ; Use with Oracle Database 12c Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[CLI Server]
+; Whether the CLI web server uses ANSI color coding in its terminal output.
+cli_server.color = On
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; If empty, default_charset or input_encoding or iconv.input_encoding is used.
+; The precedence is: default_charset < intput_encoding < iconv.input_encoding
+;iconv.input_encoding =
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;iconv.internal_encoding =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; If empty, default_charset or output_encoding or iconv.output_encoding is used.
+; The precedence is: default_charset < output_encoding < iconv.output_encoding
+; To use an output encoding conversion, iconv's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+;iconv.output_encoding =
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail().
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+; Log mail to syslog (Event Log on Windows).
+;mail.log = syslog
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if
+; your OS has problems with many files in one directory, and is
+; a more efficient layout for servers that handle many sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use strict session mode.
+; Strict session mode does not accept uninitialized session ID and regenerate
+; session ID if browser sends uninitialized session ID. Strict mode protects
+; applications from session fixation via session adoption vulnerability. It is
+; disabled by default for maximum compatibility, but enabling it is encouraged.
+; https://wiki.php.net/rfc/strict_sessions
+session.use_strict_mode = 0
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the be-all and end-all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 -type f | xargs rm
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+;session.entropy_length = 32
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; Defaults to /dev/urandom
+; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
+; If neither are found at compile time, the default is no entropy file.
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users' security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; Enable upload progress tracking in $_SESSION
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.enabled
+;session.upload_progress.enabled = On
+
+; Cleanup the progress information as soon as all POST data has been read
+; (i.e. upload completed).
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.cleanup
+;session.upload_progress.cleanup = On
+
+; A prefix used for the upload progress key in $_SESSION
+; Default Value: "upload_progress_"
+; Development Value: "upload_progress_"
+; Production Value: "upload_progress_"
+; http://php.net/session.upload-progress.prefix
+;session.upload_progress.prefix = "upload_progress_"
+
+; The index name (concatenated with the prefix) in $_SESSION
+; containing the upload progress information
+; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; http://php.net/session.upload-progress.name
+;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
+
+; How frequently the upload progress should be updated.
+; Given either in percentages (per-file), or in bytes
+; Default Value: "1%"
+; Development Value: "1%"
+; Production Value: "1%"
+; http://php.net/session.upload-progress.freq
+;session.upload_progress.freq = "1%"
+
+; The minimum delay between updates, in seconds
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.upload-progress.min-freq
+;session.upload_progress.min_freq = "1"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatibility_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; This affects mb_send_mail() and mbstrig.detect_order.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; internal/script encoding.
+; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;mbstring.internal_encoding =
+
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; http input encoding.
+; mbstring.encoding_traslation = On is needed to use this setting.
+; If empty, default_charset or input_encoding or mbstring.input is used.
+; The precedence is: default_charset < intput_encoding < mbsting.http_input
+; http://php.net/mbstring.http-input
+;mbstring.http_input =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; http output encoding.
+; mb_output_handler must be registered as output buffer to function.
+; If empty, default_charset or output_encoding or mbstring.http_output is used.
+; The precedence is: default_charset < output_encoding < mbstring.http_output
+; To use an output encoding conversion, mbstring's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+; http://php.net/mbstring.http-output
+;mbstring.http_output =
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; "auto" detect order is changed according to mbstring.language
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+; Default: Off
+;mbstring.strict_detection = On
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[opcache]
+; Determines if Zend OPCache is enabled
+;opcache.enable=0
+
+; Determines if Zend OPCache is enabled for the CLI version of PHP
+;opcache.enable_cli=0
+
+; The OPcache shared memory storage size.
+;opcache.memory_consumption=64
+
+; The amount of memory for interned strings in Mbytes.
+;opcache.interned_strings_buffer=4
+
+; The maximum number of keys (scripts) in the OPcache hash table.
+; Only numbers between 200 and 100000 are allowed.
+;opcache.max_accelerated_files=2000
+
+; The maximum percentage of "wasted" memory until a restart is scheduled.
+;opcache.max_wasted_percentage=5
+
+; When this directive is enabled, the OPcache appends the current working
+; directory to the script key, thus eliminating possible collisions between
+; files with the same name (basename). Disabling the directive improves
+; performance, but may break existing applications.
+;opcache.use_cwd=1
+
+; When disabled, you must reset the OPcache manually or restart the
+; webserver for changes to the filesystem to take effect.
+;opcache.validate_timestamps=1
+
+; How often (in seconds) to check file timestamps for changes to the shared
+; memory storage allocation. ("1" means validate once per second, but only
+; once per request. "0" means always validate)
+;opcache.revalidate_freq=2
+
+; Enables or disables file search in include_path optimization
+;opcache.revalidate_path=0
+
+; If disabled, all PHPDoc comments are dropped from the code to reduce the
+; size of the optimized code.
+;opcache.save_comments=1
+
+; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
+; may be always stored (save_comments=1), but not loaded by applications
+; that don't need them anyway.
+;opcache.load_comments=1
+
+; If enabled, a fast shutdown sequence is used for the accelerated code
+;opcache.fast_shutdown=0
+
+; Allow file existence override (file_exists, etc.) performance feature.
+;opcache.enable_file_override=0
+
+; A bitmask, where each bit enables or disables the appropriate OPcache
+; passes
+;opcache.optimization_level=0xffffffff
+
+;opcache.inherited_hack=1
+;opcache.dups_fix=0
+
+; The location of the OPcache blacklist file (wildcards allowed).
+; Each OPcache blacklist file is a text file that holds the names of files
+; that should not be accelerated. The file format is to add each filename
+; to a new line. The filename may be a full path or just a file prefix
+; (i.e., /var/www/x blacklists all the files and directories in /var/www
+; that start with 'x'). Line starting with a ; are ignored (comments).
+;opcache.blacklist_filename=
+
+; Allows exclusion of large files from being cached. By default all files
+; are cached.
+;opcache.max_file_size=0
+
+; Check the cache checksum each N requests.
+; The default value of "0" means that the checks are disabled.
+;opcache.consistency_checks=0
+
+; How long to wait (in seconds) for a scheduled restart to begin if the cache
+; is not being accessed.
+;opcache.force_restart_timeout=180
+
+; OPcache error_log file name. Empty string assumes "stderr".
+;opcache.error_log=
+
+; All OPcache errors go to the Web server log.
+; By default, only fatal errors (level 0) or errors (level 1) are logged.
+; You can also enable warnings (level 2), info messages (level 3) or
+; debug messages (level 4).
+;opcache.log_verbosity_level=1
+
+; Preferred Shared Memory back-end. Leave empty and let the system decide.
+;opcache.preferred_memory_model=
+
+; Protect the shared memory from unexpected writing during script execution.
+; Useful for internal debugging only.
+;opcache.protect_memory=0
+
+[curl]
+; A default value for the CURLOPT_CAINFO option. This is required to be an
+; absolute path.
+;curl.cainfo =
+
+[openssl]
+; The location of a Certificate Authority (CA) file on the local filesystem
+; to use when verifying the identity of SSL/TLS peers. Most users should
+; not specify a value for this directive as PHP will attempt to use the
+; OS-managed cert stores in its absence. If specified, this value may still
+; be overridden on a per-stream basis via the "cafile" SSL stream context
+; option.
+;openssl.cafile=
+
+; If openssl.cafile is not specified or if the CA file is not found, the
+; directory pointed to by openssl.capath is searched for a suitable
+; certificate. This value must be a correctly hashed certificate directory.
+; Most users should not specify a value for this directive as PHP will
+; attempt to use the OS-managed cert stores in its absence. If specified,
+; this value may still be overridden on a per-stream basis via the "capath"
+; SSL stream context option.
+;openssl.capath=
+
+; Local Variables:
+; tab-width: 4
+; End:
amr ao apache2 archive audiofile avahi bash-completion bazaar bluray branding bzip2 cairo caja
calendar caps cdda cddb cdparanoia cdr cgi consolekit cpudetection cscope css ctype cups curl
curlwrappers cvs dane dbase dbi dbus dga djvu doc dts dv dvb dvd dvdr dvdread eds examples
- encode exif expat fam fastcgi fftw fits flac flatfile fltk fontconfig
+ encode exif expat fam fastcgi ffmpeg fftw fits flac flatfile fltk fontconfig
foomaticdb ftp gconf gd gd-external geoip ggi gif gimp git glade glib gmp gnome gnome-keyring
gnustep gphoto2 gpm graphviz gsl gsm gstreamer gtk gtk3 gtkhtml handbook hal hscolour html iconv icu id3 id3tag idea
idn ieee1394 imagemagick imap imlib inifile ithreads java javascript
jabber jack java6 jbig jikes jingle jpeg jpeg2k json json-syck json-xs kde kdeenablefinal kdeprefix kerberos
- keyring kig-scripting kpathsea lame latex lcms ldap libav libcaca
+ keyring kig-scripting kpathsea lame latex lcms ldap libcaca
libnotify libsamplerate libwww live lm_sensors log4j logrotate lua lxc lzma lzo mad meanwhile mercurial
midi mhash mmx mmxext mng modperl modplug motif mp3 mp4 mpeg mplayer msn mtp
musepack musicbrainz mysql mysqli nas nautilus ncurses next networkmanager nfs nis
# ~media-video/cheese-3.6.2
~media-video/lxdvdrip-1.76
~media-video/m2vrequantizer-0.0.2_pre20060306
+#~media-video/mplayer-1.2_pre20141011
+~media-video/mplayer-1.2_pre20150214
~media-video/streamdvd-0.4
# ~net-analyzer/gnome-nettool-3.2.0
media-video/mplayer 3dnowext amrnb amrwb bs2b bl cpudetection dvdnav enca gmplayer live lzo md5sum mmxext mp2 mpg123 nemesi nut opencore-amr pnm pvr rar rtc srt teletext tga tivo vpx xanim xvmc zoran
media-video/totem iplayer -tracker upnp-av
media-video/transcode extrafilters fame lzo mjpeg network nuv postproc
-media-video/vlc atmo cdda cddax cdio chromaprint corba daap dc1394 dirac egl faad fbosd fluidsynth gme growl httpd kate libass libcaca libtar libtiger libv4l libv4l2 linsys live matroska mod mpeg omxil opencv portaudio rdp rtsp schroedinger sftp shine shout skins stream switcher taglib twolame vcdinfo vcdx vlm zvbi
+media-video/vlc atmo cdda cddax cdio chromaprint corba daap dc1394 dirac egl faad fbosd fluidsynth gme growl httpd kate libass libcaca libtar libtiger libv4l libv4l2 linsys live matroska mod mpeg omxil opencv portaudio -rdp rtsp schroedinger sftp shine shout skins stream switcher taglib twolame vcdinfo vcdx vlm zvbi
net-analyzer/nagios-nrpe command-args
net-analyzer/nagios-plugins nagios-dns nagios-ntp nagios-ping nagios-ssh
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-3.0.0/html
+html_directory = /usr/share/doc/postfix-3.0.1-r1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-3.0.0/readme
+readme_directory = /usr/share/doc/postfix-3.0.1-r1/readme
+# inet_protocols = ipv4
meta_directory = /etc/postfix
shlib_directory = /usr/lib64/postfix/${mail_version}
home_mailbox = .maildir/
export ANT_HOME='/usr/share/ant'
export CONFIG_PROTECT='/var/bind /usr/share/gnupg/qualified.txt /var/lib/hsqldb /usr/share/config /usr/lib64/libreoffice/program/sofficerc'
-export CONFIG_PROTECT_MASK='/etc/gentoo-release /etc/sandbox.d /etc/php/cli-php5.5/ext-active/ /etc/php/cgi-php5.5/ext-active/ /etc/php/apache2-php5.5/ext-active/ /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
+export CONFIG_PROTECT_MASK='/etc/gentoo-release /etc/sandbox.d /etc/php/cli-php5.6/ext-active/ /etc/php/cgi-php5.6/ext-active/ /etc/php/apache2-php5.6/ext-active/ /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
export CVS_RSH='ssh'
export EDITOR='/usr/bin/vim'
export FLTK_DOCDIR='/usr/share/doc/fltk-1.3.2/html'
export LESS='-R -M --shift 5'
export LESSOPEN='|lesspipe %s'
export LIBBLURAY_CP='/usr/share/libbluray/lib/libbluray.jar'
-export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.5/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.4/man/'
+export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.6/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.4/man/'
export MULTIOSDIRS='../lib64:../lib32'
export OPENGL_PROFILE='xorg-x11'
export PAGER='/usr/bin/less'
#SSD_NICELEVEL="-19"
# Pass ulimit parameters
+# If you are using bash in POSIX mode for your shell, note that the
+# ulimit command uses a block size of 512 bytes for the -c and -f
+# options
#rc_ulimit="-u 30"
# It's possible to define extra dependencies for services like so
# LINUX SPECIFIC OPTIONS
# This is the subsystem type. Valid options on Linux:
-# "" - nothing special
-# "lxc" - Linux Containers
-# "openvz" - Linux OpenVZ
-# "prefix" - Prefix
-# "uml" - Usermode Linux
-# "vserver" - Linux vserver
-# "xen0" - Xen0 Domain
-# "xenU" - XenU Domain
+# "" - nothing special
+# "lxc" - Linux Containers
+# "openvz" - Linux OpenVZ
+# "prefix" - Prefix
+# "uml" - Usermode Linux
+# "vserver" - Linux vserver
+# "systemd-nspawn" - Container created by the systemd-nspawn utility
+# "xen0" - Xen0 Domain
+# "xenU" - XenU Domain
# If this is commented out, automatic detection will be used.
#
# This should be set to the value representing the environment this file is
-# Generated by net-scripts for interface eth0
-domain brehm-online.com
-search home.brehm-online.com home.hennig-berlin.org brehm-online.com hennig-berlin.org uhu-banane.de
-nameserver 10.12.11.254
-#nameserver 127.0.0.1
+# Hand made by Frank Brehm
+domain home.brehm-online.com
+#search home.brehm-online.com brehm-online.com hennig-berlin.org uhu-banane.de pb.local dc1.pb.local dc2.pb.local
+search home.brehm-online.com brehm-online.com uhu-banane.de pb.local dc1.de.profitbricks.net dc2.us.profitbricks.net dc3.de.profitbricks.net
+#nameserver 10.12.11.1
+nameserver 192.168.178.30
+nameserver 192.168.178.89
+++ /dev/null
-SEARCH_DIRS_MASK="/opt/oracle-jre-bin-1.8.0.45"
--- /dev/null
+/etc/init.d/binfmt
\ No newline at end of file
+++ /dev/null
-SANDBOX_PREDICT="/dev/random:/proc/self/coredump_filter"
+++ /dev/null
-# Uncomment the following three lines to start libvirtd with the '--listen'
-# directive such that it listens for TCP/IP connections (honoring the
-# listen_tls and listen_tcp settings in /etc/libvirt/libvirtd.conf). If
-# libvirtd is started without the '--listen' parameter, network connection
-# (for the daemon) is globally disabled:
-
-# [Service]
-# ExecStart=
-# ExecStart=/usr/sbin/libvirtd --listen
-
--- /dev/null
+# Uncomment the following three lines to start libvirtd with the '--listen'
+# directive such that it listens for TCP/IP connections (honoring the
+# listen_tls and listen_tcp settings in /etc/libvirt/libvirtd.conf). If
+# libvirtd is started without the '--listen' parameter, network connection
+# (for the daemon) is globally disabled:
+
+# [Service]
+# ExecStart=
+# ExecStart=/usr/sbin/libvirtd --listen
+
80jadetex.cnf
./updmap.d:
-.keep_app-text_texlive-core-0
00updmap.cfg
+.keep_app-text_texlive-core-0
texlive-basic.cfg
texlive-context.cfg
texlive-fontsextra.cfg
texlive-science.cfg
./web2c:
-.keep_app-text_texlive-core-0
fmtutil.cnf
+.keep_app-text_texlive-core-0
texmf.cnf
updmap.cfg
set showmatch
set ignorecase
-set list listchars=tab:»·,trail:·
+set listchars=tab:»·,trail:·
+"set list
if has("multi_byte")
set encoding=utf-8
Terminal=false
Type=Application
NoDisplay=true
-NotShowIn=KDE;
+NotShowIn=KDE;GNOME;
X-GNOME-Bugzilla-Bugzilla=GNOME
X-GNOME-Bugzilla-Product=NetworkManager
X-GNOME-Bugzilla-Component=nm-applet
--- /dev/null
+qt4-x86_64-pc-linux-gnu.conf
\ No newline at end of file
--- /dev/null
+qt4.conf
\ No newline at end of file
--- /dev/null
+/usr/lib32/qt4/bin
+/usr/lib32/qt4
--- /dev/null
+/usr/lib64/qt4/bin
+/usr/lib64/qt4
--- /dev/null
+qt4-x86_64-pc-linux-gnu.conf
\ No newline at end of file
projects / config / bruni / etc.git / commitdiff