--- /dev/null
+# -----------------------------
+# PostgreSQL configuration file
+# -----------------------------
+#
+# This file consists of lines of the form:
+#
+# name = value
+#
+# (The "=" is optional.) Whitespace may be used. Comments are introduced with
+# "#" anywhere on a line. The complete list of parameter names and allowed
+# values can be found in the PostgreSQL documentation.
+#
+# The commented-out settings shown in this file represent the default values.
+# Re-commenting a setting is NOT sufficient to revert it to the default value;
+# you need to reload the server.
+#
+# This file is read on server startup and when the server receives a SIGHUP
+# signal. If you edit the file on a running system, you have to SIGHUP the
+# server for the changes to take effect, run "pg_ctl reload", or execute
+# "SELECT pg_reload_conf()". Some parameters, which are marked below,
+# require a server shutdown and restart to take effect.
+#
+# Any parameter can also be given as a command-line option to the server, e.g.,
+# "postgres -c log_connections=on". Some parameters can be changed at run time
+# with the "SET" SQL command.
+#
+# Memory units: B = bytes Time units: us = microseconds
+# kB = kilobytes ms = milliseconds
+# MB = megabytes s = seconds
+# GB = gigabytes min = minutes
+# TB = terabytes h = hours
+# d = days
+
+
+#------------------------------------------------------------------------------
+# FILE LOCATIONS
+#------------------------------------------------------------------------------
+
+# The default values of these variables are driven from the -D command-line
+# option or PGDATA environment variable, represented here as ConfigDir.
+
+#data_directory = 'ConfigDir' # use data in another directory
+ # (change requires restart)
+#hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file
+ # (change requires restart)
+#ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file
+ # (change requires restart)
+
+# If external_pid_file is not explicitly set, no extra PID file is written.
+#external_pid_file = '' # write an extra PID file
+ # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# CONNECTIONS AND AUTHENTICATION
+#------------------------------------------------------------------------------
+
+# - Connection Settings -
+
+#listen_addresses = 'localhost' # what IP address(es) to listen on;
+ # comma-separated list of addresses;
+ # defaults to 'localhost'; use '*' for all
+ # (change requires restart)
+listen_addresses = '*'
+#port = 5432 # (change requires restart)
+max_connections = 100 # (change requires restart)
+#reserved_connections = 0 # (change requires restart)
+#superuser_reserved_connections = 3 # (change requires restart)
+#unix_socket_directories = '/run/postgresql' # comma-separated list of directories
+ # (change requires restart)
+#unix_socket_group = '' # (change requires restart)
+#unix_socket_permissions = 0777 # begin with 0 to use octal notation
+ # (change requires restart)
+#bonjour = off # advertise server via Bonjour
+ # (change requires restart)
+#bonjour_name = '' # defaults to the computer name
+ # (change requires restart)
+
+# - TCP settings -
+# see "man tcp" for details
+
+#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
+ # 0 selects the system default
+#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
+ # 0 selects the system default
+#tcp_keepalives_count = 0 # TCP_KEEPCNT;
+ # 0 selects the system default
+#tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds;
+ # 0 selects the system default
+
+#client_connection_check_interval = 0 # time between checks for client
+ # disconnection while running queries;
+ # 0 for never
+
+# - Authentication -
+
+#authentication_timeout = 1min # 1s-600s
+#password_encryption = scram-sha-256 # scram-sha-256 or md5
+#scram_iterations = 4096
+#db_user_namespace = off
+
+# GSSAPI using Kerberos
+#krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab'
+#krb_caseins_users = off
+#gss_accept_delegation = off
+
+# - SSL -
+
+#ssl = off
+#ssl_ca_file = ''
+#ssl_cert_file = 'server.crt'
+#ssl_crl_file = ''
+#ssl_crl_dir = ''
+#ssl_key_file = 'server.key'
+#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
+#ssl_prefer_server_ciphers = on
+#ssl_ecdh_curve = 'prime256v1'
+#ssl_min_protocol_version = 'TLSv1.2'
+#ssl_max_protocol_version = ''
+#ssl_dh_params_file = ''
+#ssl_passphrase_command = ''
+#ssl_passphrase_command_supports_reload = off
+
+
+#------------------------------------------------------------------------------
+# RESOURCE USAGE (except WAL)
+#------------------------------------------------------------------------------
+
+# - Memory -
+
+shared_buffers = 128MB # min 128kB
+ # (change requires restart)
+#huge_pages = try # on, off, or try
+ # (change requires restart)
+#huge_page_size = 0 # zero for system default
+ # (change requires restart)
+#temp_buffers = 8MB # min 800kB
+#max_prepared_transactions = 0 # zero disables the feature
+ # (change requires restart)
+# Caution: it is not advisable to set max_prepared_transactions nonzero unless
+# you actively intend to use prepared transactions.
+#work_mem = 4MB # min 64kB
+#hash_mem_multiplier = 2.0 # 1-1000.0 multiplier on hash table work_mem
+#maintenance_work_mem = 64MB # min 1MB
+#autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem
+#logical_decoding_work_mem = 64MB # min 64kB
+#max_stack_depth = 2MB # min 100kB
+#shared_memory_type = mmap # the default is the first option
+ # supported by the operating system:
+ # mmap
+ # sysv
+ # windows
+ # (change requires restart)
+dynamic_shared_memory_type = posix # the default is usually the first option
+ # supported by the operating system:
+ # posix
+ # sysv
+ # windows
+ # mmap
+ # (change requires restart)
+#min_dynamic_shared_memory = 0MB # (change requires restart)
+#vacuum_buffer_usage_limit = 256kB # size of vacuum and analyze buffer access strategy ring;
+ # 0 to disable vacuum buffer access strategy;
+ # range 128kB to 16GB
+
+# - Disk -
+
+#temp_file_limit = -1 # limits per-process temp file space
+ # in kilobytes, or -1 for no limit
+
+# - Kernel Resources -
+
+#max_files_per_process = 1000 # min 64
+ # (change requires restart)
+
+# - Cost-Based Vacuum Delay -
+
+#vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables)
+#vacuum_cost_page_hit = 1 # 0-10000 credits
+#vacuum_cost_page_miss = 2 # 0-10000 credits
+#vacuum_cost_page_dirty = 20 # 0-10000 credits
+#vacuum_cost_limit = 200 # 1-10000 credits
+
+# - Background Writer -
+
+#bgwriter_delay = 200ms # 10-10000ms between rounds
+#bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables
+#bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round
+#bgwriter_flush_after = 512kB # measured in pages, 0 disables
+
+# - Asynchronous Behavior -
+
+#backend_flush_after = 0 # measured in pages, 0 disables
+#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching
+#maintenance_io_concurrency = 10 # 1-1000; 0 disables prefetching
+#max_worker_processes = 8 # (change requires restart)
+#max_parallel_workers_per_gather = 2 # taken from max_parallel_workers
+#max_parallel_maintenance_workers = 2 # taken from max_parallel_workers
+#max_parallel_workers = 8 # maximum number of max_worker_processes that
+ # can be used in parallel operations
+#parallel_leader_participation = on
+#old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate
+ # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# WRITE-AHEAD LOG
+#------------------------------------------------------------------------------
+
+# - Settings -
+
+#wal_level = replica # minimal, replica, or logical
+ # (change requires restart)
+#fsync = on # flush data to disk for crash safety
+ # (turning this off can cause
+ # unrecoverable data corruption)
+#synchronous_commit = on # synchronization level;
+ # off, local, remote_write, remote_apply, or on
+#wal_sync_method = fsync # the default is the first option
+ # supported by the operating system:
+ # open_datasync
+ # fdatasync (default on Linux and FreeBSD)
+ # fsync
+ # fsync_writethrough
+ # open_sync
+#full_page_writes = on # recover from partial page writes
+#wal_log_hints = off # also do full page writes of non-critical updates
+ # (change requires restart)
+#wal_compression = off # enables compression of full-page writes;
+ # off, pglz, lz4, zstd, or on
+#wal_init_zero = on # zero-fill new WAL files
+#wal_recycle = on # recycle WAL files
+#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers
+ # (change requires restart)
+#wal_writer_delay = 200ms # 1-10000 milliseconds
+#wal_writer_flush_after = 1MB # measured in pages, 0 disables
+#wal_skip_threshold = 2MB
+
+#commit_delay = 0 # range 0-100000, in microseconds
+#commit_siblings = 5 # range 1-1000
+
+# - Checkpoints -
+
+#checkpoint_timeout = 5min # range 30s-1d
+#checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0
+#checkpoint_flush_after = 256kB # measured in pages, 0 disables
+#checkpoint_warning = 30s # 0 disables
+max_wal_size = 1GB
+min_wal_size = 80MB
+
+# - Prefetching during recovery -
+
+#recovery_prefetch = try # prefetch pages referenced in the WAL?
+#wal_decode_buffer_size = 512kB # lookahead window used for prefetching
+ # (change requires restart)
+
+# - Archiving -
+
+#archive_mode = off # enables archiving; off, on, or always
+ # (change requires restart)
+#archive_library = '' # library to use to archive a WAL file
+ # (empty string indicates archive_command should
+ # be used)
+#archive_command = '' # command to use to archive a WAL file
+ # placeholders: %p = path of file to archive
+ # %f = file name only
+ # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
+#archive_timeout = 0 # force a WAL file switch after this
+ # number of seconds; 0 disables
+
+# - Archive Recovery -
+
+# These are only used in recovery mode.
+
+#restore_command = '' # command to use to restore an archived WAL file
+ # placeholders: %p = path of file to restore
+ # %f = file name only
+ # e.g. 'cp /mnt/server/archivedir/%f %p'
+#archive_cleanup_command = '' # command to execute at every restartpoint
+#recovery_end_command = '' # command to execute at completion of recovery
+
+# - Recovery Target -
+
+# Set these only when performing a targeted recovery.
+
+#recovery_target = '' # 'immediate' to end recovery as soon as a
+ # consistent state is reached
+ # (change requires restart)
+#recovery_target_name = '' # the named restore point to which recovery will proceed
+ # (change requires restart)
+#recovery_target_time = '' # the time stamp up to which recovery will proceed
+ # (change requires restart)
+#recovery_target_xid = '' # the transaction ID up to which recovery will proceed
+ # (change requires restart)
+#recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed
+ # (change requires restart)
+#recovery_target_inclusive = on # Specifies whether to stop:
+ # just after the specified recovery target (on)
+ # just before the recovery target (off)
+ # (change requires restart)
+#recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID
+ # (change requires restart)
+#recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown'
+ # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# REPLICATION
+#------------------------------------------------------------------------------
+
+# - Sending Servers -
+
+# Set these on the primary and on any standby that will send replication data.
+
+#max_wal_senders = 10 # max number of walsender processes
+ # (change requires restart)
+#max_replication_slots = 10 # max number of replication slots
+ # (change requires restart)
+#wal_keep_size = 0 # in megabytes; 0 disables
+#max_slot_wal_keep_size = -1 # in megabytes; -1 disables
+#wal_sender_timeout = 60s # in milliseconds; 0 disables
+#track_commit_timestamp = off # collect timestamp of transaction commit
+ # (change requires restart)
+
+# - Primary Server -
+
+# These settings are ignored on a standby server.
+
+#synchronous_standby_names = '' # standby servers that provide sync rep
+ # method to choose sync standbys, number of sync standbys,
+ # and comma-separated list of application_name
+ # from standby(s); '*' = all
+
+# - Standby Servers -
+
+# These settings are ignored on a primary server.
+
+#primary_conninfo = '' # connection string to sending server
+#primary_slot_name = '' # replication slot on sending server
+#hot_standby = on # "off" disallows queries during recovery
+ # (change requires restart)
+#max_standby_archive_delay = 30s # max delay before canceling queries
+ # when reading WAL from archive;
+ # -1 allows indefinite delay
+#max_standby_streaming_delay = 30s # max delay before canceling queries
+ # when reading streaming WAL;
+ # -1 allows indefinite delay
+#wal_receiver_create_temp_slot = off # create temp slot if primary_slot_name
+ # is not set
+#wal_receiver_status_interval = 10s # send replies at least this often
+ # 0 disables
+#hot_standby_feedback = off # send info from standby to prevent
+ # query conflicts
+#wal_receiver_timeout = 60s # time that receiver waits for
+ # communication from primary
+ # in milliseconds; 0 disables
+#wal_retrieve_retry_interval = 5s # time to wait before retrying to
+ # retrieve WAL after a failed attempt
+#recovery_min_apply_delay = 0 # minimum delay for applying changes during recovery
+
+# - Subscribers -
+
+# These settings are ignored on a publisher.
+
+#max_logical_replication_workers = 4 # taken from max_worker_processes
+ # (change requires restart)
+#max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers
+#max_parallel_apply_workers_per_subscription = 2 # taken from max_logical_replication_workers
+
+
+#------------------------------------------------------------------------------
+# QUERY TUNING
+#------------------------------------------------------------------------------
+
+# - Planner Method Configuration -
+
+#enable_async_append = on
+#enable_bitmapscan = on
+#enable_gathermerge = on
+#enable_hashagg = on
+#enable_hashjoin = on
+#enable_incremental_sort = on
+#enable_indexscan = on
+#enable_indexonlyscan = on
+#enable_material = on
+#enable_memoize = on
+#enable_mergejoin = on
+#enable_nestloop = on
+#enable_parallel_append = on
+#enable_parallel_hash = on
+#enable_partition_pruning = on
+#enable_partitionwise_join = off
+#enable_partitionwise_aggregate = off
+#enable_presorted_aggregate = on
+#enable_seqscan = on
+#enable_sort = on
+#enable_tidscan = on
+
+# - Planner Cost Constants -
+
+#seq_page_cost = 1.0 # measured on an arbitrary scale
+#random_page_cost = 4.0 # same scale as above
+#cpu_tuple_cost = 0.01 # same scale as above
+#cpu_index_tuple_cost = 0.005 # same scale as above
+#cpu_operator_cost = 0.0025 # same scale as above
+#parallel_setup_cost = 1000.0 # same scale as above
+#parallel_tuple_cost = 0.1 # same scale as above
+#min_parallel_table_scan_size = 8MB
+#min_parallel_index_scan_size = 512kB
+#effective_cache_size = 4GB
+
+#jit_above_cost = 100000 # perform JIT compilation if available
+ # and query more expensive than this;
+ # -1 disables
+#jit_inline_above_cost = 500000 # inline small functions if query is
+ # more expensive than this; -1 disables
+#jit_optimize_above_cost = 500000 # use expensive JIT optimizations if
+ # query is more expensive than this;
+ # -1 disables
+
+# - Genetic Query Optimizer -
+
+#geqo = on
+#geqo_threshold = 12
+#geqo_effort = 5 # range 1-10
+#geqo_pool_size = 0 # selects default based on effort
+#geqo_generations = 0 # selects default based on effort
+#geqo_selection_bias = 2.0 # range 1.5-2.0
+#geqo_seed = 0.0 # range 0.0-1.0
+
+# - Other Planner Options -
+
+#default_statistics_target = 100 # range 1-10000
+#constraint_exclusion = partition # on, off, or partition
+#cursor_tuple_fraction = 0.1 # range 0.0-1.0
+#from_collapse_limit = 8
+#jit = on # allow JIT compilation
+#join_collapse_limit = 8 # 1 disables collapsing of explicit
+ # JOIN clauses
+#plan_cache_mode = auto # auto, force_generic_plan or
+ # force_custom_plan
+#recursive_worktable_factor = 10.0 # range 0.001-1000000
+
+
+#------------------------------------------------------------------------------
+# REPORTING AND LOGGING
+#------------------------------------------------------------------------------
+
+# - Where to Log -
+
+log_destination = 'stderr' # Valid values are combinations of
+ # stderr, csvlog, jsonlog, syslog, and
+ # eventlog, depending on platform.
+ # csvlog and jsonlog require
+ # logging_collector to be on.
+
+# This is used when logging to stderr:
+logging_collector = on # Enable capturing of stderr, jsonlog,
+ # and csvlog into log files. Required
+ # to be on for csvlogs and jsonlogs.
+ # (change requires restart)
+
+# These are only used if logging_collector is on:
+log_directory = 'log' # directory where log files are written,
+ # can be absolute or relative to PGDATA
+log_filename = 'postgresql-%a.log' # log file name pattern,
+ # can include strftime() escapes
+#log_file_mode = 0600 # creation mode for log files,
+ # begin with 0 to use octal notation
+log_rotation_age = 1d # Automatic rotation of logfiles will
+ # happen after that time. 0 disables.
+log_rotation_size = 0 # Automatic rotation of logfiles will
+ # happen after that much log output.
+ # 0 disables.
+log_truncate_on_rotation = on # If on, an existing log file with the
+ # same name as the new log file will be
+ # truncated rather than appended to.
+ # But such truncation only occurs on
+ # time-driven rotation, not on restarts
+ # or size-driven rotation. Default is
+ # off, meaning append to existing files
+ # in all cases.
+
+# These are relevant when logging to syslog:
+#syslog_facility = 'LOCAL0'
+#syslog_ident = 'postgres'
+#syslog_sequence_numbers = on
+#syslog_split_messages = on
+
+# This is only relevant when logging to eventlog (Windows):
+# (change requires restart)
+#event_source = 'PostgreSQL'
+
+# - When to Log -
+
+#log_min_messages = warning # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # info
+ # notice
+ # warning
+ # error
+ # log
+ # fatal
+ # panic
+
+#log_min_error_statement = error # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # info
+ # notice
+ # warning
+ # error
+ # log
+ # fatal
+ # panic (effectively off)
+
+#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
+ # and their durations, > 0 logs only
+ # statements running at least this number
+ # of milliseconds
+
+#log_min_duration_sample = -1 # -1 is disabled, 0 logs a sample of statements
+ # and their durations, > 0 logs only a sample of
+ # statements running at least this number
+ # of milliseconds;
+ # sample fraction is determined by log_statement_sample_rate
+
+#log_statement_sample_rate = 1.0 # fraction of logged statements exceeding
+ # log_min_duration_sample to be logged;
+ # 1.0 logs all such statements, 0.0 never logs
+
+
+#log_transaction_sample_rate = 0.0 # fraction of transactions whose statements
+ # are logged regardless of their duration; 1.0 logs all
+ # statements from all transactions, 0.0 never logs
+
+#log_startup_progress_interval = 10s # Time between progress updates for
+ # long-running startup operations.
+ # 0 disables the feature, > 0 indicates
+ # the interval in milliseconds.
+
+# - What to Log -
+
+#debug_print_parse = off
+#debug_print_rewritten = off
+#debug_print_plan = off
+#debug_pretty_print = on
+#log_autovacuum_min_duration = 10min # log autovacuum activity;
+ # -1 disables, 0 logs all actions and
+ # their durations, > 0 logs only
+ # actions running at least this number
+ # of milliseconds.
+#log_checkpoints = on
+#log_connections = off
+#log_disconnections = off
+#log_duration = off
+#log_error_verbosity = default # terse, default, or verbose messages
+#log_hostname = off
+log_line_prefix = '%m [%p] ' # special values:
+ # %a = application name
+ # %u = user name
+ # %d = database name
+ # %r = remote host and port
+ # %h = remote host
+ # %b = backend type
+ # %p = process ID
+ # %P = process ID of parallel group leader
+ # %t = timestamp without milliseconds
+ # %m = timestamp with milliseconds
+ # %n = timestamp with milliseconds (as a Unix epoch)
+ # %Q = query ID (0 if none or not computed)
+ # %i = command tag
+ # %e = SQL state
+ # %c = session ID
+ # %l = session line number
+ # %s = session start timestamp
+ # %v = virtual transaction ID
+ # %x = transaction ID (0 if none)
+ # %q = stop here in non-session
+ # processes
+ # %% = '%'
+ # e.g. '<%u%%%d> '
+#log_lock_waits = off # log lock waits >= deadlock_timeout
+#log_recovery_conflict_waits = off # log standby recovery conflict waits
+ # >= deadlock_timeout
+#log_parameter_max_length = -1 # when logging statements, limit logged
+ # bind-parameter values to N bytes;
+ # -1 means print in full, 0 disables
+#log_parameter_max_length_on_error = 0 # when logging an error, limit logged
+ # bind-parameter values to N bytes;
+ # -1 means print in full, 0 disables
+#log_statement = 'none' # none, ddl, mod, all
+#log_replication_commands = off
+#log_temp_files = -1 # log temporary files equal or larger
+ # than the specified size in kilobytes;
+ # -1 disables, 0 logs all temp files
+log_timezone = 'Europe/Berlin'
+
+# - Process Title -
+
+#cluster_name = '' # added to process titles if nonempty
+ # (change requires restart)
+#update_process_title = on
+
+
+#------------------------------------------------------------------------------
+# STATISTICS
+#------------------------------------------------------------------------------
+
+# - Cumulative Query and Index Statistics -
+
+#track_activities = on
+#track_activity_query_size = 1024 # (change requires restart)
+#track_counts = on
+#track_io_timing = off
+#track_wal_io_timing = off
+#track_functions = none # none, pl, all
+#stats_fetch_consistency = cache # cache, none, snapshot
+
+
+# - Monitoring -
+
+#compute_query_id = auto
+#log_statement_stats = off
+#log_parser_stats = off
+#log_planner_stats = off
+#log_executor_stats = off
+
+
+#------------------------------------------------------------------------------
+# AUTOVACUUM
+#------------------------------------------------------------------------------
+
+#autovacuum = on # Enable autovacuum subprocess? 'on'
+ # requires track_counts to also be on.
+#autovacuum_max_workers = 3 # max number of autovacuum subprocesses
+ # (change requires restart)
+#autovacuum_naptime = 1min # time between autovacuum runs
+#autovacuum_vacuum_threshold = 50 # min number of row updates before
+ # vacuum
+#autovacuum_vacuum_insert_threshold = 1000 # min number of row inserts
+ # before vacuum; -1 disables insert
+ # vacuums
+#autovacuum_analyze_threshold = 50 # min number of row updates before
+ # analyze
+#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
+#autovacuum_vacuum_insert_scale_factor = 0.2 # fraction of inserts over table
+ # size before insert vacuum
+#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
+#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum
+ # (change requires restart)
+#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age
+ # before forced vacuum
+ # (change requires restart)
+#autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for
+ # autovacuum, in milliseconds;
+ # -1 means use vacuum_cost_delay
+#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
+ # autovacuum, -1 means use
+ # vacuum_cost_limit
+
+
+#------------------------------------------------------------------------------
+# CLIENT CONNECTION DEFAULTS
+#------------------------------------------------------------------------------
+
+# - Statement Behavior -
+
+#client_min_messages = notice # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # log
+ # notice
+ # warning
+ # error
+#search_path = '"$user", public' # schema names
+#row_security = on
+#default_table_access_method = 'heap'
+#default_tablespace = '' # a tablespace name, '' uses the default
+#default_toast_compression = 'pglz' # 'pglz' or 'lz4'
+#temp_tablespaces = '' # a list of tablespace names, '' uses
+ # only default tablespace
+#check_function_bodies = on
+#default_transaction_isolation = 'read committed'
+#default_transaction_read_only = off
+#default_transaction_deferrable = off
+#session_replication_role = 'origin'
+#statement_timeout = 0 # in milliseconds, 0 is disabled
+#lock_timeout = 0 # in milliseconds, 0 is disabled
+#idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled
+#idle_session_timeout = 0 # in milliseconds, 0 is disabled
+#vacuum_freeze_table_age = 150000000
+#vacuum_freeze_min_age = 50000000
+#vacuum_failsafe_age = 1600000000
+#vacuum_multixact_freeze_table_age = 150000000
+#vacuum_multixact_freeze_min_age = 5000000
+#vacuum_multixact_failsafe_age = 1600000000
+#bytea_output = 'hex' # hex, escape
+#xmlbinary = 'base64'
+#xmloption = 'content'
+#gin_pending_list_limit = 4MB
+#createrole_self_grant = '' # set and/or inherit
+
+# - Locale and Formatting -
+
+datestyle = 'iso, mdy'
+#intervalstyle = 'postgres'
+timezone = 'Europe/Berlin'
+#timezone_abbreviations = 'Default' # Select the set of available time zone
+ # abbreviations. Currently, there are
+ # Default
+ # Australia (historical usage)
+ # India
+ # You can create your own file in
+ # share/timezonesets/.
+#extra_float_digits = 1 # min -15, max 3; any value >0 actually
+ # selects precise output mode
+#client_encoding = sql_ascii # actually, defaults to database
+ # encoding
+
+# These settings are initialized by initdb, but they can be changed.
+lc_messages = 'C.UTF-8' # locale for system error message
+ # strings
+lc_monetary = 'C.UTF-8' # locale for monetary formatting
+lc_numeric = 'C.UTF-8' # locale for number formatting
+lc_time = 'C.UTF-8' # locale for time formatting
+
+#icu_validation_level = warning # report ICU locale validation
+ # errors at the given level
+
+# default configuration for text search
+default_text_search_config = 'pg_catalog.english'
+
+# - Shared Library Preloading -
+
+#local_preload_libraries = ''
+#session_preload_libraries = ''
+#shared_preload_libraries = '' # (change requires restart)
+#jit_provider = 'llvmjit' # JIT library to use
+
+# - Other Defaults -
+
+#dynamic_library_path = '$libdir'
+#gin_fuzzy_search_limit = 0
+
+
+#------------------------------------------------------------------------------
+# LOCK MANAGEMENT
+#------------------------------------------------------------------------------
+
+#deadlock_timeout = 1s
+#max_locks_per_transaction = 64 # min 10
+ # (change requires restart)
+#max_pred_locks_per_transaction = 64 # min 10
+ # (change requires restart)
+#max_pred_locks_per_relation = -2 # negative values mean
+ # (max_pred_locks_per_transaction
+ # / -max_pred_locks_per_relation) - 1
+#max_pred_locks_per_page = 2 # min 0
+
+
+#------------------------------------------------------------------------------
+# VERSION AND PLATFORM COMPATIBILITY
+#------------------------------------------------------------------------------
+
+# - Previous PostgreSQL Versions -
+
+#array_nulls = on
+#backslash_quote = safe_encoding # on, off, or safe_encoding
+#escape_string_warning = on
+#lo_compat_privileges = off
+#quote_all_identifiers = off
+#standard_conforming_strings = on
+#synchronize_seqscans = on
+
+# - Other Platforms and Clients -
+
+#transform_null_equals = off
+
+
+#------------------------------------------------------------------------------
+# ERROR HANDLING
+#------------------------------------------------------------------------------
+
+#exit_on_error = off # terminate session on any error?
+#restart_after_crash = on # reinitialize after backend crash?
+#data_sync_retry = off # retry or panic on failure to fsync
+ # data?
+ # (change requires restart)
+#recovery_init_sync_method = fsync # fsync, syncfs (Linux 5.8+)
+
+
+#------------------------------------------------------------------------------
+# CONFIG FILE INCLUDES
+#------------------------------------------------------------------------------
+
+# These options allow settings to be loaded from files other than the
+# default postgresql.conf. Note that these are directives, not variable
+# assignments, so they can usefully be given more than once.
+
+#include_dir = '...' # include files ending in '.conf' from
+ # a directory, e.g., 'conf.d'
+#include_if_exists = '...' # include file only if it exists
+#include = '...' # include file
+
+
+#------------------------------------------------------------------------------
+# CUSTOMIZED OPTIONS
+#------------------------------------------------------------------------------
+
+# Add settings for extensions here
projects / config / rocky9 / etc.git / commitdiff