maybe chmod 0644 './apache2/modules.d/46_mod_ldap.conf'
maybe chmod 0644 './apache2/modules.d/47_mod_dav_svn.conf'
maybe chmod 0644 './apache2/modules.d/70_mod_php5.conf'
+maybe chmod 0644 './apache2/modules.d/99_nagios3.conf'
maybe chmod 0755 './apache2/vhosts.d'
maybe chmod 0644 './apache2/vhosts.d/.keep_www-servers_apache-2'
maybe chmod 0644 './apache2/vhosts.d/00_default_ssl_vhost.conf'
maybe chmod 0644 './conf.d/mdraid'
maybe chmod 0644 './conf.d/modules'
maybe chmod 0644 './conf.d/mysql'
+maybe chmod 0644 './conf.d/nagios'
maybe chmod 0644 './conf.d/net'
maybe chmod 0644 './conf.d/network'
maybe chmod 0644 './conf.d/ntp-client'
maybe chmod 0755 './init.d/mount-ro'
maybe chmod 0755 './init.d/mtab'
maybe chmod 0755 './init.d/mysql'
+maybe chmod 0755 './init.d/nagios'
maybe chmod 0755 './init.d/net.lo'
maybe chmod 0755 './init.d/netmount'
maybe chmod 0755 './init.d/network'
maybe chmod 0755 './mysql'
maybe chmod 0644 './mysql/my.cnf'
maybe chmod 0644 './mysql/mysqlaccess.conf'
+maybe chown nagios './nagios'
+maybe chgrp nagios './nagios'
+maybe chmod 0750 './nagios'
+maybe chmod 0644 './nagios/.keep_net-analyzer_nagios-core-0'
+maybe chown nagios './nagios/cgi.cfg'
+maybe chgrp nagios './nagios/cgi.cfg'
+maybe chmod 0664 './nagios/cgi.cfg'
+maybe chown nagios './nagios/nagios.cfg'
+maybe chgrp nagios './nagios/nagios.cfg'
+maybe chmod 0664 './nagios/nagios.cfg'
+maybe chown nagios './nagios/objects'
+maybe chgrp nagios './nagios/objects'
+maybe chmod 0775 './nagios/objects'
+maybe chown nagios './nagios/objects/commands.cfg'
+maybe chgrp nagios './nagios/objects/commands.cfg'
+maybe chmod 0664 './nagios/objects/commands.cfg'
+maybe chown nagios './nagios/objects/contacts.cfg'
+maybe chgrp nagios './nagios/objects/contacts.cfg'
+maybe chmod 0664 './nagios/objects/contacts.cfg'
+maybe chown nagios './nagios/objects/localhost.cfg'
+maybe chgrp nagios './nagios/objects/localhost.cfg'
+maybe chmod 0664 './nagios/objects/localhost.cfg'
+maybe chown nagios './nagios/objects/printer.cfg'
+maybe chgrp nagios './nagios/objects/printer.cfg'
+maybe chmod 0664 './nagios/objects/printer.cfg'
+maybe chown nagios './nagios/objects/switch.cfg'
+maybe chgrp nagios './nagios/objects/switch.cfg'
+maybe chmod 0664 './nagios/objects/switch.cfg'
+maybe chown nagios './nagios/objects/templates.cfg'
+maybe chgrp nagios './nagios/objects/templates.cfg'
+maybe chmod 0664 './nagios/objects/templates.cfg'
+maybe chown nagios './nagios/objects/timeperiods.cfg'
+maybe chgrp nagios './nagios/objects/timeperiods.cfg'
+maybe chmod 0664 './nagios/objects/timeperiods.cfg'
+maybe chown nagios './nagios/objects/windows.cfg'
+maybe chgrp nagios './nagios/objects/windows.cfg'
+maybe chmod 0664 './nagios/objects/windows.cfg'
+maybe chown nagios './nagios/resource.cfg'
+maybe chgrp nagios './nagios/resource.cfg'
+maybe chmod 0660 './nagios/resource.cfg'
maybe chmod 0644 './nail.rc'
maybe chmod 0644 './nanorc'
maybe chmod 0644 './networks'
--- /dev/null
+<IfDefine NAGIOS>
+ ScriptAlias /nagios/cgi-bin/ /usr/lib/nagios/cgi-bin/
+ <Directory "/usr/lib/nagios/cgi-bin/">
+ AllowOverride AuthConfig
+ Options ExecCGI
+ Order allow,deny
+ Allow from all
+ </Directory>
+ Alias /nagios /usr/share/nagios/htdocs
+ <Directory "/usr/share/nagios/htdocs">
+ AllowOverride AuthConfig
+ Order allow,deny
+ Allow from all
+ </Directory>
+</IfDefine>
--- /dev/null
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-analyzer/nagios-core/files/conf.d,v 1.1 2004/08/20 13:38:13 eldad Exp $
+
+# Distributed monitoring users will want to configure here the ip/hostname of the central server.
+# It will be used by submit_check_result_via_nsca.
+NAGIOS_NSCA_HOST="localhost"
+
+
+
--- /dev/null
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-analyzer/nagios-core/files/nagios3,v 1.2 2011/12/30 15:34:02 polynomial-c Exp $
+
+extra_commands="checkconfig"
+extra_started_commands="reload"
+
+nagios_config="/etc/nagios/nagios.cfg"
+nagios_cmdfile="/var/nagios/rw/nagios.cmd"
+
+command="/usr/sbin/nagios"
+command_args="-d ${nagios_config}"
+pidfile="/var/nagios/nagios.lock"
+start_stop_daemon_args="-e HOME=/var/nagios/home"
+
+depend() {
+ need net
+ use dns logger firewall
+ after mysql postgresql
+}
+
+reload()
+{
+ checkconfig || return 1
+ ebegin "Reloading configuration"
+ start-stop-daemon --signal HUP --pidfile ${pidfile}
+ eend $?
+}
+
+checkconfig() {
+ ebegin "Verifiyng config files"
+
+ # Silent Check
+ /usr/sbin/nagios -v ${nagios_config} &>/dev/null && return 0
+
+ # Now we know there's problem - run again and display errors
+ /usr/sbin/nagios -v ${nagios_config}
+ eend $? "Configuration Error. Please fix your configfile"
+}
+
+start_pre() {
+ checkconfig || return 1
+
+ touch /var/nagios/nagios.log /var/nagios/status.sav
+ chown nagios:nagios /var/nagios/nagios.log /var/nagios/status.sav
+ rm -f ${nagios_cmdfile}
+}
+
+stop_post() {
+ rm -f /var/nagios/status.log /var/nagios/nagios.tmp ${pidfile} \
+ ${nagios_cmdfile}
+}
--- /dev/null
+#################################################################
+#
+# CGI.CFG - Sample CGI Configuration File for Nagios 3.3.1
+#
+# Last Modified: 06-17-2009
+#
+#################################################################
+
+
+# MAIN CONFIGURATION FILE
+# This tells the CGIs where to find your main configuration file.
+# The CGIs will read the main and host config files for any other
+# data they might need.
+
+main_config_file=/etc/nagios/nagios.cfg
+
+
+
+# PHYSICAL HTML PATH
+# This is the path where the HTML files for Nagios reside. This
+# value is used to locate the logo images needed by the statusmap
+# and statuswrl CGIs.
+
+physical_html_path=/usr/share/nagios/htdocs
+
+
+
+# URL HTML PATH
+# This is the path portion of the URL that corresponds to the
+# physical location of the Nagios HTML files (as defined above).
+# This value is used by the CGIs to locate the online documentation
+# and graphics. If you access the Nagios pages with an URL like
+# http://www.myhost.com/nagios, this value should be '/nagios'
+# (without the quotes).
+
+url_html_path=/nagios
+
+
+
+# CONTEXT-SENSITIVE HELP
+# This option determines whether or not a context-sensitive
+# help icon will be displayed for most of the CGIs.
+# Values: 0 = disables context-sensitive help
+# 1 = enables context-sensitive help
+
+show_context_help=0
+
+
+
+# PENDING STATES OPTION
+# This option determines what states should be displayed in the web
+# interface for hosts/services that have not yet been checked.
+# Values: 0 = leave hosts/services that have not been check yet in their original state
+# 1 = mark hosts/services that have not been checked yet as PENDING
+
+use_pending_states=1
+
+
+
+
+# AUTHENTICATION USAGE
+# This option controls whether or not the CGIs will use any
+# authentication when displaying host and service information, as
+# well as committing commands to Nagios for processing.
+#
+# Read the HTML documentation to learn how the authorization works!
+#
+# NOTE: It is a really *bad* idea to disable authorization, unless
+# you plan on removing the command CGI (cmd.cgi)! Failure to do
+# so will leave you wide open to kiddies messing with Nagios and
+# possibly hitting you with a denial of service attack by filling up
+# your drive by continuously writing to your command file!
+#
+# Setting this value to 0 will cause the CGIs to *not* use
+# authentication (bad idea), while any other value will make them
+# use the authentication functions (the default).
+
+use_authentication=1
+
+
+
+
+# x509 CERT AUTHENTICATION
+# When enabled, this option allows you to use x509 cert (SSL)
+# authentication in the CGIs. This is an advanced option and should
+# not be enabled unless you know what you're doing.
+
+use_ssl_authentication=0
+
+
+
+
+# DEFAULT USER
+# Setting this variable will define a default user name that can
+# access pages without authentication. This allows people within a
+# secure domain (i.e., behind a firewall) to see the current status
+# without authenticating. You may want to use this to avoid basic
+# authentication if you are not using a secure server since basic
+# authentication transmits passwords in the clear.
+#
+# Important: Do not define a default username unless you are
+# running a secure web server and are sure that everyone who has
+# access to the CGIs has been authenticated in some manner! If you
+# define this variable, anyone who has not authenticated to the web
+# server will inherit all rights you assign to this user!
+
+#default_user_name=guest
+
+
+
+# SYSTEM/PROCESS INFORMATION ACCESS
+# This option is a comma-delimited list of all usernames that
+# have access to viewing the Nagios process information as
+# provided by the Extended Information CGI (extinfo.cgi). By
+# default, *no one* has access to this unless you choose to
+# not use authorization. You may use an asterisk (*) to
+# authorize any user who has authenticated to the web server.
+
+authorized_for_system_information=nagiosadmin
+
+
+
+# CONFIGURATION INFORMATION ACCESS
+# This option is a comma-delimited list of all usernames that
+# can view ALL configuration information (hosts, commands, etc).
+# By default, users can only view configuration information
+# for the hosts and services they are contacts for. You may use
+# an asterisk (*) to authorize any user who has authenticated
+# to the web server.
+
+authorized_for_configuration_information=nagiosadmin
+
+
+
+# SYSTEM/PROCESS COMMAND ACCESS
+# This option is a comma-delimited list of all usernames that
+# can issue shutdown and restart commands to Nagios via the
+# command CGI (cmd.cgi). Users in this list can also change
+# the program mode to active or standby. By default, *no one*
+# has access to this unless you choose to not use authorization.
+# You may use an asterisk (*) to authorize any user who has
+# authenticated to the web server.
+
+authorized_for_system_commands=nagiosadmin
+
+
+
+# GLOBAL HOST/SERVICE VIEW ACCESS
+# These two options are comma-delimited lists of all usernames that
+# can view information for all hosts and services that are being
+# monitored. By default, users can only view information
+# for hosts or services that they are contacts for (unless you
+# you choose to not use authorization). You may use an asterisk (*)
+# to authorize any user who has authenticated to the web server.
+
+
+authorized_for_all_services=nagiosadmin
+authorized_for_all_hosts=nagiosadmin
+
+
+
+# GLOBAL HOST/SERVICE COMMAND ACCESS
+# These two options are comma-delimited lists of all usernames that
+# can issue host or service related commands via the command
+# CGI (cmd.cgi) for all hosts and services that are being monitored.
+# By default, users can only issue commands for hosts or services
+# that they are contacts for (unless you you choose to not use
+# authorization). You may use an asterisk (*) to authorize any
+# user who has authenticated to the web server.
+
+authorized_for_all_service_commands=nagiosadmin
+authorized_for_all_host_commands=nagiosadmin
+
+
+
+# READ-ONLY USERS
+# A comma-delimited list of usernames that have read-only rights in
+# the CGIs. This will block any service or host commands normally shown
+# on the extinfo CGI pages. It will also block comments from being shown
+# to read-only users.
+
+#authorized_for_read_only=user1,user2
+
+
+
+
+# STATUSMAP BACKGROUND IMAGE
+# This option allows you to specify an image to be used as a
+# background in the statusmap CGI. It is assumed that the image
+# resides in the HTML images path (i.e. /usr/local/nagios/share/images).
+# This path is automatically determined by appending "/images"
+# to the path specified by the 'physical_html_path' directive.
+# Note: The image file may be in GIF, PNG, JPEG, or GD2 format.
+# However, I recommend that you convert your image to GD2 format
+# (uncompressed), as this will cause less CPU load when the CGI
+# generates the image.
+
+#statusmap_background_image=smbackground.gd2
+
+
+
+
+# STATUSMAP TRANSPARENCY INDEX COLOR
+# These options set the r,g,b values of the background color used the statusmap CGI,
+# so normal browsers that can't show real png transparency set the desired color as
+# a background color instead (to make it look pretty).
+# Defaults to white: (R,G,B) = (255,255,255).
+
+#color_transparency_index_r=255
+#color_transparency_index_g=255
+#color_transparency_index_b=255
+
+
+
+
+# DEFAULT STATUSMAP LAYOUT METHOD
+# This option allows you to specify the default layout method
+# the statusmap CGI should use for drawing hosts. If you do
+# not use this option, the default is to use user-defined
+# coordinates. Valid options are as follows:
+# 0 = User-defined coordinates
+# 1 = Depth layers
+# 2 = Collapsed tree
+# 3 = Balanced tree
+# 4 = Circular
+# 5 = Circular (Marked Up)
+
+default_statusmap_layout=5
+
+
+
+# DEFAULT STATUSWRL LAYOUT METHOD
+# This option allows you to specify the default layout method
+# the statuswrl (VRML) CGI should use for drawing hosts. If you
+# do not use this option, the default is to use user-defined
+# coordinates. Valid options are as follows:
+# 0 = User-defined coordinates
+# 2 = Collapsed tree
+# 3 = Balanced tree
+# 4 = Circular
+
+default_statuswrl_layout=4
+
+
+
+# STATUSWRL INCLUDE
+# This option allows you to include your own objects in the
+# generated VRML world. It is assumed that the file
+# resides in the HTML path (i.e. /usr/local/nagios/share).
+
+#statuswrl_include=myworld.wrl
+
+
+
+# PING SYNTAX
+# This option determines what syntax should be used when
+# attempting to ping a host from the WAP interface (using
+# the statuswml CGI. You must include the full path to
+# the ping binary, along with all required options. The
+# $HOSTADDRESS$ macro is substituted with the address of
+# the host before the command is executed.
+# Please note that the syntax for the ping binary is
+# notorious for being different on virtually ever *NIX
+# OS and distribution, so you may have to tweak this to
+# work on your system.
+
+ping_syntax=/bin/ping -n -U -c 5 $HOSTADDRESS$
+
+
+
+# REFRESH RATE
+# This option allows you to specify the refresh rate in seconds
+# of various CGIs (status, statusmap, extinfo, and outages).
+
+refresh_rate=90
+
+
+
+# ESCAPE HTML TAGS
+# This option determines whether HTML tags in host and service
+# status output is escaped in the web interface. If enabled,
+# your plugin output will not be able to contain clickable links.
+
+escape_html_tags=1
+
+
+
+
+# SOUND OPTIONS
+# These options allow you to specify an optional audio file
+# that should be played in your browser window when there are
+# problems on the network. The audio files are used only in
+# the status CGI. Only the sound for the most critical problem
+# will be played. Order of importance (higher to lower) is as
+# follows: unreachable hosts, down hosts, critical services,
+# warning services, and unknown services. If there are no
+# visible problems, the sound file optionally specified by
+# 'normal_sound' variable will be played.
+#
+#
+# <varname>=<sound_file>
+#
+# Note: All audio files must be placed in the /media subdirectory
+# under the HTML path (i.e. /usr/local/nagios/share/media/).
+
+#host_unreachable_sound=hostdown.wav
+#host_down_sound=hostdown.wav
+#service_critical_sound=critical.wav
+#service_warning_sound=warning.wav
+#service_unknown_sound=warning.wav
+#normal_sound=noproblem.wav
+
+
+
+# URL TARGET FRAMES
+# These options determine the target frames in which notes and
+# action URLs will open.
+
+action_url_target=_blank
+notes_url_target=_blank
+
+
+
+
+# LOCK AUTHOR NAMES OPTION
+# This option determines whether users can change the author name
+# when submitting comments, scheduling downtime. If disabled, the
+# author names will be locked into their contact name, as defined in Nagios.
+# Values: 0 = allow editing author names
+# 1 = lock author names (disallow editing)
+
+lock_author_names=1
+
+
+
+
+# SPLUNK INTEGRATION OPTIONS
+# These options allow you to enable integration with Splunk
+# in the web interface. If enabled, you'll be presented with
+# "Splunk It" links in various places in the CGIs (log file,
+# alert history, host/service detail, etc). Useful if you're
+# trying to research why a particular problem occurred.
+# For more information on Splunk, visit http://www.splunk.com/
+
+# This option determines whether the Splunk integration is enabled
+# Values: 0 = disable Splunk integration
+# 1 = enable Splunk integration
+
+#enable_splunk_integration=1
+
+
+# This option should be the URL used to access your instance of Splunk
+
+#splunk_url=http://127.0.0.1:8000/
+
+
+
--- /dev/null
+##############################################################################
+#
+# NAGIOS.CFG - Sample Main Config File for Nagios 3.3.1
+#
+# Read the documentation for more information on this configuration
+# file. I've provided some comments here, but things may not be so
+# clear without further explanation.
+#
+# Last Modified: 12-14-2008
+#
+##############################################################################
+
+
+# LOG FILE
+# This is the main log file where service and host events are logged
+# for historical purposes. This should be the first option specified
+# in the config file!!!
+
+log_file=/var/nagios/nagios.log
+
+
+
+# OBJECT CONFIGURATION FILE(S)
+# These are the object configuration files in which you define hosts,
+# host groups, contacts, contact groups, services, etc.
+# You can split your object definitions across several config files
+# if you wish (as shown below), or keep them all in a single config file.
+
+# You can specify individual object config files as shown below:
+cfg_file=/etc/nagios/objects/commands.cfg
+cfg_file=/etc/nagios/objects/contacts.cfg
+cfg_file=/etc/nagios/objects/timeperiods.cfg
+cfg_file=/etc/nagios/objects/templates.cfg
+
+# Definitions for monitoring the local (Linux) host
+cfg_file=/etc/nagios/objects/localhost.cfg
+
+# Definitions for monitoring a Windows machine
+#cfg_file=/etc/nagios/objects/windows.cfg
+
+# Definitions for monitoring a router/switch
+#cfg_file=/etc/nagios/objects/switch.cfg
+
+# Definitions for monitoring a network printer
+#cfg_file=/etc/nagios/objects/printer.cfg
+
+
+# You can also tell Nagios to process all config files (with a .cfg
+# extension) in a particular directory by using the cfg_dir
+# directive as shown below:
+
+#cfg_dir=/etc/nagios/servers
+#cfg_dir=/etc/nagios/printers
+#cfg_dir=/etc/nagios/switches
+#cfg_dir=/etc/nagios/routers
+
+
+
+
+# OBJECT CACHE FILE
+# This option determines where object definitions are cached when
+# Nagios starts/restarts. The CGIs read object definitions from
+# this cache file (rather than looking at the object config files
+# directly) in order to prevent inconsistencies that can occur
+# when the config files are modified after Nagios starts.
+
+object_cache_file=/var/nagios/objects.cache
+
+
+
+# PRE-CACHED OBJECT FILE
+# This options determines the location of the precached object file.
+# If you run Nagios with the -p command line option, it will preprocess
+# your object configuration file(s) and write the cached config to this
+# file. You can then start Nagios with the -u option to have it read
+# object definitions from this precached file, rather than the standard
+# object configuration files (see the cfg_file and cfg_dir options above).
+# Using a precached object file can speed up the time needed to (re)start
+# the Nagios process if you've got a large and/or complex configuration.
+# Read the documentation section on optimizing Nagios to find our more
+# about how this feature works.
+
+precached_object_file=/var/nagios/objects.precache
+
+
+
+# RESOURCE FILE
+# This is an optional resource file that contains $USERx$ macro
+# definitions. Multiple resource files can be specified by using
+# multiple resource_file definitions. The CGIs will not attempt to
+# read the contents of resource files, so information that is
+# considered to be sensitive (usernames, passwords, etc) can be
+# defined as macros in this file and restrictive permissions (600)
+# can be placed on this file.
+
+resource_file=/etc/nagios/resource.cfg
+
+
+
+# STATUS FILE
+# This is where the current status of all monitored services and
+# hosts is stored. Its contents are read and processed by the CGIs.
+# The contents of the status file are deleted every time Nagios
+# restarts.
+
+status_file=/var/nagios/status.dat
+
+
+
+# STATUS FILE UPDATE INTERVAL
+# This option determines the frequency (in seconds) that
+# Nagios will periodically dump program, host, and
+# service status data.
+
+status_update_interval=10
+
+
+
+# NAGIOS USER
+# This determines the effective user that Nagios should run as.
+# You can either supply a username or a UID.
+
+nagios_user=nagios
+
+
+
+# NAGIOS GROUP
+# This determines the effective group that Nagios should run as.
+# You can either supply a group name or a GID.
+
+nagios_group=nagios
+
+
+
+# EXTERNAL COMMAND OPTION
+# This option allows you to specify whether or not Nagios should check
+# for external commands (in the command file defined below). By default
+# Nagios will *not* check for external commands, just to be on the
+# cautious side. If you want to be able to use the CGI command interface
+# you will have to enable this.
+# Values: 0 = disable commands, 1 = enable commands
+
+check_external_commands=1
+
+
+
+# EXTERNAL COMMAND CHECK INTERVAL
+# This is the interval at which Nagios should check for external commands.
+# This value works of the interval_length you specify later. If you leave
+# that at its default value of 60 (seconds), a value of 1 here will cause
+# Nagios to check for external commands every minute. If you specify a
+# number followed by an "s" (i.e. 15s), this will be interpreted to mean
+# actual seconds rather than a multiple of the interval_length variable.
+# Note: In addition to reading the external command file at regularly
+# scheduled intervals, Nagios will also check for external commands after
+# event handlers are executed.
+# NOTE: Setting this value to -1 causes Nagios to check the external
+# command file as often as possible.
+
+#command_check_interval=15s
+command_check_interval=-1
+
+
+
+# EXTERNAL COMMAND FILE
+# This is the file that Nagios checks for external command requests.
+# It is also where the command CGI will write commands that are submitted
+# by users, so it must be writeable by the user that the web server
+# is running as (usually 'nobody'). Permissions should be set at the
+# directory level instead of on the file, as the file is deleted every
+# time its contents are processed.
+
+command_file=/var/nagios/rw/nagios.cmd
+
+
+
+# EXTERNAL COMMAND BUFFER SLOTS
+# This settings is used to tweak the number of items or "slots" that
+# the Nagios daemon should allocate to the buffer that holds incoming
+# external commands before they are processed. As external commands
+# are processed by the daemon, they are removed from the buffer.
+
+external_command_buffer_slots=4096
+
+
+
+# LOCK FILE
+# This is the lockfile that Nagios will use to store its PID number
+# in when it is running in daemon mode.
+
+lock_file=/var/nagios/nagios.lock
+
+
+
+# TEMP FILE
+# This is a temporary file that is used as scratch space when Nagios
+# updates the status log, cleans the comment file, etc. This file
+# is created, used, and deleted throughout the time that Nagios is
+# running.
+
+temp_file=/var/nagios/nagios.tmp
+
+
+
+# TEMP PATH
+# This is path where Nagios can create temp files for service and
+# host check results, etc.
+
+temp_path=/tmp
+
+
+
+# EVENT BROKER OPTIONS
+# Controls what (if any) data gets sent to the event broker.
+# Values: 0 = Broker nothing
+# -1 = Broker everything
+# <other> = See documentation
+
+event_broker_options=-1
+
+
+
+# EVENT BROKER MODULE(S)
+# This directive is used to specify an event broker module that should
+# by loaded by Nagios at startup. Use multiple directives if you want
+# to load more than one module. Arguments that should be passed to
+# the module at startup are seperated from the module path by a space.
+#
+#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+# WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING
+#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+#
+# Do NOT overwrite modules while they are being used by Nagios or Nagios
+# will crash in a fiery display of SEGFAULT glory. This is a bug/limitation
+# either in dlopen(), the kernel, and/or the filesystem. And maybe Nagios...
+#
+# The correct/safe way of updating a module is by using one of these methods:
+# 1. Shutdown Nagios, replace the module file, restart Nagios
+# 2. Delete the original module file, move the new module file into place, restart Nagios
+#
+# Example:
+#
+# broker_module=<modulepath> [moduleargs]
+
+#broker_module=/somewhere/module1.o
+#broker_module=/somewhere/module2.o arg1 arg2=3 debug=0
+
+
+
+# LOG ROTATION METHOD
+# This is the log rotation method that Nagios should use to rotate
+# the main log file. Values are as follows..
+# n = None - don't rotate the log
+# h = Hourly rotation (top of the hour)
+# d = Daily rotation (midnight every day)
+# w = Weekly rotation (midnight on Saturday evening)
+# m = Monthly rotation (midnight last day of month)
+
+log_rotation_method=d
+
+
+
+# LOG ARCHIVE PATH
+# This is the directory where archived (rotated) log files should be
+# placed (assuming you've chosen to do log rotation).
+
+log_archive_path=/var/nagios/archives
+
+
+
+# LOGGING OPTIONS
+# If you want messages logged to the syslog facility, as well as the
+# Nagios log file set this option to 1. If not, set it to 0.
+
+use_syslog=1
+
+
+
+# NOTIFICATION LOGGING OPTION
+# If you don't want notifications to be logged, set this value to 0.
+# If notifications should be logged, set the value to 1.
+
+log_notifications=1
+
+
+
+# SERVICE RETRY LOGGING OPTION
+# If you don't want service check retries to be logged, set this value
+# to 0. If retries should be logged, set the value to 1.
+
+log_service_retries=1
+
+
+
+# HOST RETRY LOGGING OPTION
+# If you don't want host check retries to be logged, set this value to
+# 0. If retries should be logged, set the value to 1.
+
+log_host_retries=1
+
+
+
+# EVENT HANDLER LOGGING OPTION
+# If you don't want host and service event handlers to be logged, set
+# this value to 0. If event handlers should be logged, set the value
+# to 1.
+
+log_event_handlers=1
+
+
+
+# INITIAL STATES LOGGING OPTION
+# If you want Nagios to log all initial host and service states to
+# the main log file (the first time the service or host is checked)
+# you can enable this option by setting this value to 1. If you
+# are not using an external application that does long term state
+# statistics reporting, you do not need to enable this option. In
+# this case, set the value to 0.
+
+log_initial_states=0
+
+
+
+# EXTERNAL COMMANDS LOGGING OPTION
+# If you don't want Nagios to log external commands, set this value
+# to 0. If external commands should be logged, set this value to 1.
+# Note: This option does not include logging of passive service
+# checks - see the option below for controlling whether or not
+# passive checks are logged.
+
+log_external_commands=1
+
+
+
+# PASSIVE CHECKS LOGGING OPTION
+# If you don't want Nagios to log passive host and service checks, set
+# this value to 0. If passive checks should be logged, set
+# this value to 1.
+
+log_passive_checks=1
+
+
+
+# GLOBAL HOST AND SERVICE EVENT HANDLERS
+# These options allow you to specify a host and service event handler
+# command that is to be run for every host or service state change.
+# The global event handler is executed immediately prior to the event
+# handler that you have optionally specified in each host or
+# service definition. The command argument is the short name of a
+# command definition that you define in your host configuration file.
+# Read the HTML docs for more information.
+
+#global_host_event_handler=somecommand
+#global_service_event_handler=somecommand
+
+
+
+# SERVICE INTER-CHECK DELAY METHOD
+# This is the method that Nagios should use when initially
+# "spreading out" service checks when it starts monitoring. The
+# default is to use smart delay calculation, which will try to
+# space all service checks out evenly to minimize CPU load.
+# Using the dumb setting will cause all checks to be scheduled
+# at the same time (with no delay between them)! This is not a
+# good thing for production, but is useful when testing the
+# parallelization functionality.
+# n = None - don't use any delay between checks
+# d = Use a "dumb" delay of 1 second between checks
+# s = Use "smart" inter-check delay calculation
+# x.xx = Use an inter-check delay of x.xx seconds
+
+service_inter_check_delay_method=s
+
+
+
+# MAXIMUM SERVICE CHECK SPREAD
+# This variable determines the timeframe (in minutes) from the
+# program start time that an initial check of all services should
+# be completed. Default is 30 minutes.
+
+max_service_check_spread=30
+
+
+
+# SERVICE CHECK INTERLEAVE FACTOR
+# This variable determines how service checks are interleaved.
+# Interleaving the service checks allows for a more even
+# distribution of service checks and reduced load on remote
+# hosts. Setting this value to 1 is equivalent to how versions
+# of Nagios previous to 0.0.5 did service checks. Set this
+# value to s (smart) for automatic calculation of the interleave
+# factor unless you have a specific reason to change it.
+# s = Use "smart" interleave factor calculation
+# x = Use an interleave factor of x, where x is a
+# number greater than or equal to 1.
+
+service_interleave_factor=s
+
+
+
+# HOST INTER-CHECK DELAY METHOD
+# This is the method that Nagios should use when initially
+# "spreading out" host checks when it starts monitoring. The
+# default is to use smart delay calculation, which will try to
+# space all host checks out evenly to minimize CPU load.
+# Using the dumb setting will cause all checks to be scheduled
+# at the same time (with no delay between them)!
+# n = None - don't use any delay between checks
+# d = Use a "dumb" delay of 1 second between checks
+# s = Use "smart" inter-check delay calculation
+# x.xx = Use an inter-check delay of x.xx seconds
+
+host_inter_check_delay_method=s
+
+
+
+# MAXIMUM HOST CHECK SPREAD
+# This variable determines the timeframe (in minutes) from the
+# program start time that an initial check of all hosts should
+# be completed. Default is 30 minutes.
+
+max_host_check_spread=30
+
+
+
+# MAXIMUM CONCURRENT SERVICE CHECKS
+# This option allows you to specify the maximum number of
+# service checks that can be run in parallel at any given time.
+# Specifying a value of 1 for this variable essentially prevents
+# any service checks from being parallelized. A value of 0
+# will not restrict the number of concurrent checks that are
+# being executed.
+
+max_concurrent_checks=0
+
+
+
+# HOST AND SERVICE CHECK REAPER FREQUENCY
+# This is the frequency (in seconds!) that Nagios will process
+# the results of host and service checks.
+
+check_result_reaper_frequency=10
+
+
+
+
+# MAX CHECK RESULT REAPER TIME
+# This is the max amount of time (in seconds) that a single
+# check result reaper event will be allowed to run before
+# returning control back to Nagios so it can perform other
+# duties.
+
+max_check_result_reaper_time=30
+
+
+
+
+# CHECK RESULT PATH
+# This is directory where Nagios stores the results of host and
+# service checks that have not yet been processed.
+#
+# Note: Make sure that only one instance of Nagios has access
+# to this directory!
+
+check_result_path=/var/nagios/spool/checkresults
+
+
+
+
+# MAX CHECK RESULT FILE AGE
+# This option determines the maximum age (in seconds) which check
+# result files are considered to be valid. Files older than this
+# threshold will be mercilessly deleted without further processing.
+
+max_check_result_file_age=3600
+
+
+
+
+# CACHED HOST CHECK HORIZON
+# This option determines the maximum amount of time (in seconds)
+# that the state of a previous host check is considered current.
+# Cached host states (from host checks that were performed more
+# recently that the timeframe specified by this value) can immensely
+# improve performance in regards to the host check logic.
+# Too high of a value for this option may result in inaccurate host
+# states being used by Nagios, while a lower value may result in a
+# performance hit for host checks. Use a value of 0 to disable host
+# check caching.
+
+cached_host_check_horizon=15
+
+
+
+# CACHED SERVICE CHECK HORIZON
+# This option determines the maximum amount of time (in seconds)
+# that the state of a previous service check is considered current.
+# Cached service states (from service checks that were performed more
+# recently that the timeframe specified by this value) can immensely
+# improve performance in regards to predictive dependency checks.
+# Use a value of 0 to disable service check caching.
+
+cached_service_check_horizon=15
+
+
+
+# ENABLE PREDICTIVE HOST DEPENDENCY CHECKS
+# This option determines whether or not Nagios will attempt to execute
+# checks of hosts when it predicts that future dependency logic test
+# may be needed. These predictive checks can help ensure that your
+# host dependency logic works well.
+# Values:
+# 0 = Disable predictive checks
+# 1 = Enable predictive checks (default)
+
+enable_predictive_host_dependency_checks=1
+
+
+
+# ENABLE PREDICTIVE SERVICE DEPENDENCY CHECKS
+# This option determines whether or not Nagios will attempt to execute
+# checks of service when it predicts that future dependency logic test
+# may be needed. These predictive checks can help ensure that your
+# service dependency logic works well.
+# Values:
+# 0 = Disable predictive checks
+# 1 = Enable predictive checks (default)
+
+enable_predictive_service_dependency_checks=1
+
+
+
+# SOFT STATE DEPENDENCIES
+# This option determines whether or not Nagios will use soft state
+# information when checking host and service dependencies. Normally
+# Nagios will only use the latest hard host or service state when
+# checking dependencies. If you want it to use the latest state (regardless
+# of whether its a soft or hard state type), enable this option.
+# Values:
+# 0 = Don't use soft state dependencies (default)
+# 1 = Use soft state dependencies
+
+soft_state_dependencies=0
+
+
+
+# TIME CHANGE ADJUSTMENT THRESHOLDS
+# These options determine when Nagios will react to detected changes
+# in system time (either forward or backwards).
+
+#time_change_threshold=900
+
+
+
+# AUTO-RESCHEDULING OPTION
+# This option determines whether or not Nagios will attempt to
+# automatically reschedule active host and service checks to
+# "smooth" them out over time. This can help balance the load on
+# the monitoring server.
+# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
+# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
+
+auto_reschedule_checks=0
+
+
+
+# AUTO-RESCHEDULING INTERVAL
+# This option determines how often (in seconds) Nagios will
+# attempt to automatically reschedule checks. This option only
+# has an effect if the auto_reschedule_checks option is enabled.
+# Default is 30 seconds.
+# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
+# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
+
+auto_rescheduling_interval=30
+
+
+
+# AUTO-RESCHEDULING WINDOW
+# This option determines the "window" of time (in seconds) that
+# Nagios will look at when automatically rescheduling checks.
+# Only host and service checks that occur in the next X seconds
+# (determined by this variable) will be rescheduled. This option
+# only has an effect if the auto_reschedule_checks option is
+# enabled. Default is 180 seconds (3 minutes).
+# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
+# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
+
+auto_rescheduling_window=180
+
+
+
+# SLEEP TIME
+# This is the number of seconds to sleep between checking for system
+# events and service checks that need to be run.
+
+sleep_time=0.25
+
+
+
+# TIMEOUT VALUES
+# These options control how much time Nagios will allow various
+# types of commands to execute before killing them off. Options
+# are available for controlling maximum time allotted for
+# service checks, host checks, event handlers, notifications, the
+# ocsp command, and performance data commands. All values are in
+# seconds.
+
+service_check_timeout=60
+host_check_timeout=30
+event_handler_timeout=30
+notification_timeout=30
+ocsp_timeout=5
+perfdata_timeout=5
+
+
+
+# RETAIN STATE INFORMATION
+# This setting determines whether or not Nagios will save state
+# information for services and hosts before it shuts down. Upon
+# startup Nagios will reload all saved service and host state
+# information before starting to monitor. This is useful for
+# maintaining long-term data on state statistics, etc, but will
+# slow Nagios down a bit when it (re)starts. Since its only
+# a one-time penalty, I think its well worth the additional
+# startup delay.
+
+retain_state_information=1
+
+
+
+# STATE RETENTION FILE
+# This is the file that Nagios should use to store host and
+# service state information before it shuts down. The state
+# information in this file is also read immediately prior to
+# starting to monitor the network when Nagios is restarted.
+# This file is used only if the retain_state_information
+# variable is set to 1.
+
+state_retention_file=/var/nagios/retention.dat
+
+
+
+# RETENTION DATA UPDATE INTERVAL
+# This setting determines how often (in minutes) that Nagios
+# will automatically save retention data during normal operation.
+# If you set this value to 0, Nagios will not save retention
+# data at regular interval, but it will still save retention
+# data before shutting down or restarting. If you have disabled
+# state retention, this option has no effect.
+
+retention_update_interval=60
+
+
+
+# USE RETAINED PROGRAM STATE
+# This setting determines whether or not Nagios will set
+# program status variables based on the values saved in the
+# retention file. If you want to use retained program status
+# information, set this value to 1. If not, set this value
+# to 0.
+
+use_retained_program_state=1
+
+
+
+# USE RETAINED SCHEDULING INFO
+# This setting determines whether or not Nagios will retain
+# the scheduling info (next check time) for hosts and services
+# based on the values saved in the retention file. If you
+# If you want to use retained scheduling info, set this
+# value to 1. If not, set this value to 0.
+
+use_retained_scheduling_info=1
+
+
+
+# RETAINED ATTRIBUTE MASKS (ADVANCED FEATURE)
+# The following variables are used to specify specific host and
+# service attributes that should *not* be retained by Nagios during
+# program restarts.
+#
+# The values of the masks are bitwise ANDs of values specified
+# by the "MODATTR_" definitions found in include/common.h.
+# For example, if you do not want the current enabled/disabled state
+# of flap detection and event handlers for hosts to be retained, you
+# would use a value of 24 for the host attribute mask...
+# MODATTR_EVENT_HANDLER_ENABLED (8) + MODATTR_FLAP_DETECTION_ENABLED (16) = 24
+
+# This mask determines what host attributes are not retained
+retained_host_attribute_mask=0
+
+# This mask determines what service attributes are not retained
+retained_service_attribute_mask=0
+
+# These two masks determine what process attributes are not retained.
+# There are two masks, because some process attributes have host and service
+# options. For example, you can disable active host checks, but leave active
+# service checks enabled.
+retained_process_host_attribute_mask=0
+retained_process_service_attribute_mask=0
+
+# These two masks determine what contact attributes are not retained.
+# There are two masks, because some contact attributes have host and
+# service options. For example, you can disable host notifications for
+# a contact, but leave service notifications enabled for them.
+retained_contact_host_attribute_mask=0
+retained_contact_service_attribute_mask=0
+
+
+
+# INTERVAL LENGTH
+# This is the seconds per unit interval as used in the
+# host/contact/service configuration files. Setting this to 60 means
+# that each interval is one minute long (60 seconds). Other settings
+# have not been tested much, so your mileage is likely to vary...
+
+interval_length=60
+
+
+
+# CHECK FOR UPDATES
+# This option determines whether Nagios will automatically check to
+# see if new updates (releases) are available. It is recommend that you
+# enable this option to ensure that you stay on top of the latest critical
+# patches to Nagios. Nagios is critical to you - make sure you keep it in
+# good shape. Nagios will check once a day for new updates. Data collected
+# by Nagios Enterprises from the update check is processed in accordance
+# with our privacy policy - see http://api.nagios.org for details.
+
+check_for_updates=1
+
+
+
+# BARE UPDATE CHECK
+# This option deterines what data Nagios will send to api.nagios.org when
+# it checks for updates. By default, Nagios will send information on the
+# current version of Nagios you have installed, as well as an indicator as
+# to whether this was a new installation or not. Nagios Enterprises uses
+# this data to determine the number of users running specific version of
+# Nagios. Enable this option if you do not want this information to be sent.
+
+bare_update_check=0
+
+
+
+# AGGRESSIVE HOST CHECKING OPTION
+# If you don't want to turn on aggressive host checking features, set
+# this value to 0 (the default). Otherwise set this value to 1 to
+# enable the aggressive check option. Read the docs for more info
+# on what aggressive host check is or check out the source code in
+# base/checks.c
+
+use_aggressive_host_checking=0
+
+
+
+# SERVICE CHECK EXECUTION OPTION
+# This determines whether or not Nagios will actively execute
+# service checks when it initially starts. If this option is
+# disabled, checks are not actively made, but Nagios can still
+# receive and process passive check results that come in. Unless
+# you're implementing redundant hosts or have a special need for
+# disabling the execution of service checks, leave this enabled!
+# Values: 1 = enable checks, 0 = disable checks
+
+execute_service_checks=1
+
+
+
+# PASSIVE SERVICE CHECK ACCEPTANCE OPTION
+# This determines whether or not Nagios will accept passive
+# service checks results when it initially (re)starts.
+# Values: 1 = accept passive checks, 0 = reject passive checks
+
+accept_passive_service_checks=1
+
+
+
+# HOST CHECK EXECUTION OPTION
+# This determines whether or not Nagios will actively execute
+# host checks when it initially starts. If this option is
+# disabled, checks are not actively made, but Nagios can still
+# receive and process passive check results that come in. Unless
+# you're implementing redundant hosts or have a special need for
+# disabling the execution of host checks, leave this enabled!
+# Values: 1 = enable checks, 0 = disable checks
+
+execute_host_checks=1
+
+
+
+# PASSIVE HOST CHECK ACCEPTANCE OPTION
+# This determines whether or not Nagios will accept passive
+# host checks results when it initially (re)starts.
+# Values: 1 = accept passive checks, 0 = reject passive checks
+
+accept_passive_host_checks=1
+
+
+
+# NOTIFICATIONS OPTION
+# This determines whether or not Nagios will sent out any host or
+# service notifications when it is initially (re)started.
+# Values: 1 = enable notifications, 0 = disable notifications
+
+enable_notifications=1
+
+
+
+# EVENT HANDLER USE OPTION
+# This determines whether or not Nagios will run any host or
+# service event handlers when it is initially (re)started. Unless
+# you're implementing redundant hosts, leave this option enabled.
+# Values: 1 = enable event handlers, 0 = disable event handlers
+
+enable_event_handlers=1
+
+
+
+# PROCESS PERFORMANCE DATA OPTION
+# This determines whether or not Nagios will process performance
+# data returned from service and host checks. If this option is
+# enabled, host performance data will be processed using the
+# host_perfdata_command (defined below) and service performance
+# data will be processed using the service_perfdata_command (also
+# defined below). Read the HTML docs for more information on
+# performance data.
+# Values: 1 = process performance data, 0 = do not process performance data
+
+process_performance_data=0
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS
+# These commands are run after every host and service check is
+# performed. These commands are executed only if the
+# enable_performance_data option (above) is set to 1. The command
+# argument is the short name of a command definition that you
+# define in your host configuration file. Read the HTML docs for
+# more information on performance data.
+
+#host_perfdata_command=process-host-perfdata
+#service_perfdata_command=process-service-perfdata
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILES
+# These files are used to store host and service performance data.
+# Performance data is only written to these files if the
+# enable_performance_data option (above) is set to 1.
+
+#host_perfdata_file=/tmp/host-perfdata
+#service_perfdata_file=/tmp/service-perfdata
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILE TEMPLATES
+# These options determine what data is written (and how) to the
+# performance data files. The templates may contain macros, special
+# characters (\t for tab, \r for carriage return, \n for newline)
+# and plain text. A newline is automatically added after each write
+# to the performance data file. Some examples of what you can do are
+# shown below.
+
+#host_perfdata_file_template=[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$
+#service_perfdata_file_template=[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILE MODES
+# This option determines whether or not the host and service
+# performance data files are opened in write ("w") or append ("a")
+# mode. If you want to use named pipes, you should use the special
+# pipe ("p") mode which avoid blocking at startup, otherwise you will
+# likely want the defult append ("a") mode.
+
+#host_perfdata_file_mode=a
+#service_perfdata_file_mode=a
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING INTERVAL
+# These options determine how often (in seconds) the host and service
+# performance data files are processed using the commands defined
+# below. A value of 0 indicates the files should not be periodically
+# processed.
+
+#host_perfdata_file_processing_interval=0
+#service_perfdata_file_processing_interval=0
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING COMMANDS
+# These commands are used to periodically process the host and
+# service performance data files. The interval at which the
+# processing occurs is determined by the options above.
+
+#host_perfdata_file_processing_command=process-host-perfdata-file
+#service_perfdata_file_processing_command=process-service-perfdata-file
+
+
+
+# OBSESS OVER SERVICE CHECKS OPTION
+# This determines whether or not Nagios will obsess over service
+# checks and run the ocsp_command defined below. Unless you're
+# planning on implementing distributed monitoring, do not enable
+# this option. Read the HTML docs for more information on
+# implementing distributed monitoring.
+# Values: 1 = obsess over services, 0 = do not obsess (default)
+
+obsess_over_services=0
+
+
+
+# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND
+# This is the command that is run for every service check that is
+# processed by Nagios. This command is executed only if the
+# obsess_over_services option (above) is set to 1. The command
+# argument is the short name of a command definition that you
+# define in your host configuration file. Read the HTML docs for
+# more information on implementing distributed monitoring.
+
+#ocsp_command=somecommand
+
+
+
+# OBSESS OVER HOST CHECKS OPTION
+# This determines whether or not Nagios will obsess over host
+# checks and run the ochp_command defined below. Unless you're
+# planning on implementing distributed monitoring, do not enable
+# this option. Read the HTML docs for more information on
+# implementing distributed monitoring.
+# Values: 1 = obsess over hosts, 0 = do not obsess (default)
+
+obsess_over_hosts=0
+
+
+
+# OBSESSIVE COMPULSIVE HOST PROCESSOR COMMAND
+# This is the command that is run for every host check that is
+# processed by Nagios. This command is executed only if the
+# obsess_over_hosts option (above) is set to 1. The command
+# argument is the short name of a command definition that you
+# define in your host configuration file. Read the HTML docs for
+# more information on implementing distributed monitoring.
+
+#ochp_command=somecommand
+
+
+
+# TRANSLATE PASSIVE HOST CHECKS OPTION
+# This determines whether or not Nagios will translate
+# DOWN/UNREACHABLE passive host check results into their proper
+# state for this instance of Nagios. This option is useful
+# if you have distributed or failover monitoring setup. In
+# these cases your other Nagios servers probably have a different
+# "view" of the network, with regards to the parent/child relationship
+# of hosts. If a distributed monitoring server thinks a host
+# is DOWN, it may actually be UNREACHABLE from the point of
+# this Nagios instance. Enabling this option will tell Nagios
+# to translate any DOWN or UNREACHABLE host states it receives
+# passively into the correct state from the view of this server.
+# Values: 1 = perform translation, 0 = do not translate (default)
+
+translate_passive_host_checks=0
+
+
+
+# PASSIVE HOST CHECKS ARE SOFT OPTION
+# This determines whether or not Nagios will treat passive host
+# checks as being HARD or SOFT. By default, a passive host check
+# result will put a host into a HARD state type. This can be changed
+# by enabling this option.
+# Values: 0 = passive checks are HARD, 1 = passive checks are SOFT
+
+passive_host_checks_are_soft=0
+
+
+
+# ORPHANED HOST/SERVICE CHECK OPTIONS
+# These options determine whether or not Nagios will periodically
+# check for orphaned host service checks. Since service checks are
+# not rescheduled until the results of their previous execution
+# instance are processed, there exists a possibility that some
+# checks may never get rescheduled. A similar situation exists for
+# host checks, although the exact scheduling details differ a bit
+# from service checks. Orphaned checks seem to be a rare
+# problem and should not happen under normal circumstances.
+# If you have problems with service checks never getting
+# rescheduled, make sure you have orphaned service checks enabled.
+# Values: 1 = enable checks, 0 = disable checks
+
+check_for_orphaned_services=1
+check_for_orphaned_hosts=1
+
+
+
+# SERVICE FRESHNESS CHECK OPTION
+# This option determines whether or not Nagios will periodically
+# check the "freshness" of service results. Enabling this option
+# is useful for ensuring passive checks are received in a timely
+# manner.
+# Values: 1 = enabled freshness checking, 0 = disable freshness checking
+
+check_service_freshness=1
+
+
+
+# SERVICE FRESHNESS CHECK INTERVAL
+# This setting determines how often (in seconds) Nagios will
+# check the "freshness" of service check results. If you have
+# disabled service freshness checking, this option has no effect.
+
+service_freshness_check_interval=60
+
+
+
+# HOST FRESHNESS CHECK OPTION
+# This option determines whether or not Nagios will periodically
+# check the "freshness" of host results. Enabling this option
+# is useful for ensuring passive checks are received in a timely
+# manner.
+# Values: 1 = enabled freshness checking, 0 = disable freshness checking
+
+check_host_freshness=0
+
+
+
+# HOST FRESHNESS CHECK INTERVAL
+# This setting determines how often (in seconds) Nagios will
+# check the "freshness" of host check results. If you have
+# disabled host freshness checking, this option has no effect.
+
+host_freshness_check_interval=60
+
+
+
+
+# ADDITIONAL FRESHNESS THRESHOLD LATENCY
+# This setting determines the number of seconds that Nagios
+# will add to any host and service freshness thresholds that
+# it calculates (those not explicitly specified by the user).
+
+additional_freshness_latency=15
+
+
+
+
+# FLAP DETECTION OPTION
+# This option determines whether or not Nagios will try
+# and detect hosts and services that are "flapping".
+# Flapping occurs when a host or service changes between
+# states too frequently. When Nagios detects that a
+# host or service is flapping, it will temporarily suppress
+# notifications for that host/service until it stops
+# flapping. Flap detection is very experimental, so read
+# the HTML documentation before enabling this feature!
+# Values: 1 = enable flap detection
+# 0 = disable flap detection (default)
+
+enable_flap_detection=1
+
+
+
+# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES
+# Read the HTML documentation on flap detection for
+# an explanation of what this option does. This option
+# has no effect if flap detection is disabled.
+
+low_service_flap_threshold=5.0
+high_service_flap_threshold=20.0
+low_host_flap_threshold=5.0
+high_host_flap_threshold=20.0
+
+
+
+# DATE FORMAT OPTION
+# This option determines how short dates are displayed. Valid options
+# include:
+# us (MM-DD-YYYY HH:MM:SS)
+# euro (DD-MM-YYYY HH:MM:SS)
+# iso8601 (YYYY-MM-DD HH:MM:SS)
+# strict-iso8601 (YYYY-MM-DDTHH:MM:SS)
+#
+
+date_format=us
+
+
+
+
+# TIMEZONE OFFSET
+# This option is used to override the default timezone that this
+# instance of Nagios runs in. If not specified, Nagios will use
+# the system configured timezone.
+#
+# NOTE: In order to display the correct timezone in the CGIs, you
+# will also need to alter the Apache directives for the CGI path
+# to include your timezone. Example:
+#
+# <Directory "/usr/local/nagios/sbin/">
+# SetEnv TZ "Australia/Brisbane"
+# ...
+# </Directory>
+
+#use_timezone=US/Mountain
+#use_timezone=Australia/Brisbane
+
+
+
+
+# P1.PL FILE LOCATION
+# This value determines where the p1.pl perl script (used by the
+# embedded Perl interpreter) is located. If you didn't compile
+# Nagios with embedded Perl support, this option has no effect.
+
+p1_file=/usr/sbin/p1.pl
+
+
+
+# EMBEDDED PERL INTERPRETER OPTION
+# This option determines whether or not the embedded Perl interpreter
+# will be enabled during runtime. This option has no effect if Nagios
+# has not been compiled with support for embedded Perl.
+# Values: 0 = disable interpreter, 1 = enable interpreter
+
+enable_embedded_perl=1
+
+
+
+# EMBEDDED PERL USAGE OPTION
+# This option determines whether or not Nagios will process Perl plugins
+# and scripts with the embedded Perl interpreter if the plugins/scripts
+# do not explicitly indicate whether or not it is okay to do so. Read
+# the HTML documentation on the embedded Perl interpreter for more
+# information on how this option works.
+
+use_embedded_perl_implicitly=1
+
+
+
+# ILLEGAL OBJECT NAME CHARACTERS
+# This option allows you to specify illegal characters that cannot
+# be used in host names, service descriptions, or names of other
+# object types.
+
+illegal_object_name_chars=`~!$%^&*|'"<>?,()=
+
+
+
+# ILLEGAL MACRO OUTPUT CHARACTERS
+# This option allows you to specify illegal characters that are
+# stripped from macros before being used in notifications, event
+# handlers, etc. This DOES NOT affect macros used in service or
+# host check commands.
+# The following macros are stripped of the characters you specify:
+# $HOSTOUTPUT$
+# $HOSTPERFDATA$
+# $HOSTACKAUTHOR$
+# $HOSTACKCOMMENT$
+# $SERVICEOUTPUT$
+# $SERVICEPERFDATA$
+# $SERVICEACKAUTHOR$
+# $SERVICEACKCOMMENT$
+
+illegal_macro_output_chars=`~$&|'"<>
+
+
+
+# REGULAR EXPRESSION MATCHING
+# This option controls whether or not regular expression matching
+# takes place in the object config files. Regular expression
+# matching is used to match host, hostgroup, service, and service
+# group names/descriptions in some fields of various object types.
+# Values: 1 = enable regexp matching, 0 = disable regexp matching
+
+use_regexp_matching=0
+
+
+
+# "TRUE" REGULAR EXPRESSION MATCHING
+# This option controls whether or not "true" regular expression
+# matching takes place in the object config files. This option
+# only has an effect if regular expression matching is enabled
+# (see above). If this option is DISABLED, regular expression
+# matching only occurs if a string contains wildcard characters
+# (* and ?). If the option is ENABLED, regexp matching occurs
+# all the time (which can be annoying).
+# Values: 1 = enable true matching, 0 = disable true matching
+
+use_true_regexp_matching=0
+
+
+
+# ADMINISTRATOR EMAIL/PAGER ADDRESSES
+# The email and pager address of a global administrator (likely you).
+# Nagios never uses these values itself, but you can access them by
+# using the $ADMINEMAIL$ and $ADMINPAGER$ macros in your notification
+# commands.
+
+admin_email=nagios@localhost
+admin_pager=pagenagios@localhost
+
+
+
+# DAEMON CORE DUMP OPTION
+# This option determines whether or not Nagios is allowed to create
+# a core dump when it runs as a daemon. Note that it is generally
+# considered bad form to allow this, but it may be useful for
+# debugging purposes. Enabling this option doesn't guarantee that
+# a core file will be produced, but that's just life...
+# Values: 1 - Allow core dumps
+# 0 - Do not allow core dumps (default)
+
+daemon_dumps_core=0
+
+
+
+# LARGE INSTALLATION TWEAKS OPTION
+# This option determines whether or not Nagios will take some shortcuts
+# which can save on memory and CPU usage in large Nagios installations.
+# Read the documentation for more information on the benefits/tradeoffs
+# of enabling this option.
+# Values: 1 - Enabled tweaks
+# 0 - Disable tweaks (default)
+
+use_large_installation_tweaks=0
+
+
+
+# ENABLE ENVIRONMENT MACROS
+# This option determines whether or not Nagios will make all standard
+# macros available as environment variables when host/service checks
+# and system commands (event handlers, notifications, etc.) are
+# executed. Enabling this option can cause performance issues in
+# large installations, as it will consume a bit more memory and (more
+# importantly) consume more CPU.
+# Values: 1 - Enable environment variable macros (default)
+# 0 - Disable environment variable macros
+
+enable_environment_macros=1
+
+
+
+# CHILD PROCESS MEMORY OPTION
+# This option determines whether or not Nagios will free memory in
+# child processes (processed used to execute system commands and host/
+# service checks). If you specify a value here, it will override
+# program defaults.
+# Value: 1 - Free memory in child processes
+# 0 - Do not free memory in child processes
+
+#free_child_process_memory=1
+
+
+
+# CHILD PROCESS FORKING BEHAVIOR
+# This option determines how Nagios will fork child processes
+# (used to execute system commands and host/service checks). Normally
+# child processes are fork()ed twice, which provides a very high level
+# of isolation from problems. Fork()ing once is probably enough and will
+# save a great deal on CPU usage (in large installs), so you might
+# want to consider using this. If you specify a value here, it will
+# program defaults.
+# Value: 1 - Child processes fork() twice
+# 0 - Child processes fork() just once
+
+#child_processes_fork_twice=1
+
+
+
+# DEBUG LEVEL
+# This option determines how much (if any) debugging information will
+# be written to the debug file. OR values together to log multiple
+# types of information.
+# Values:
+# -1 = Everything
+# 0 = Nothing
+# 1 = Functions
+# 2 = Configuration
+# 4 = Process information
+# 8 = Scheduled events
+# 16 = Host/service checks
+# 32 = Notifications
+# 64 = Event broker
+# 128 = External commands
+# 256 = Commands
+# 512 = Scheduled downtime
+# 1024 = Comments
+# 2048 = Macros
+
+debug_level=0
+
+
+
+# DEBUG VERBOSITY
+# This option determines how verbose the debug log out will be.
+# Values: 0 = Brief output
+# 1 = More detailed
+# 2 = Very detailed
+
+debug_verbosity=1
+
+
+
+# DEBUG FILE
+# This option determines where Nagios should write debugging information.
+
+debug_file=/var/nagios/nagios.debug
+
+
+
+# MAX DEBUG FILE SIZE
+# This option determines the maximum size (in bytes) of the debug file. If
+# the file grows larger than this size, it will be renamed with a .old
+# extension. If a file already exists with a .old extension it will
+# automatically be deleted. This helps ensure your disk space usage doesn't
+# get out of control when debugging Nagios.
+
+max_debug_file_size=1000000
+
+
--- /dev/null
+###############################################################################
+# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 3.3.1
+#
+# Last Modified: 05-31-2007
+#
+# NOTES: This config file provides you with some example command definitions
+# that you can reference in host, service, and contact definitions.
+#
+# You don't need to keep commands in a separate file from your other
+# object definitions. This has been done just to make things easier to
+# understand.
+#
+###############################################################################
+
+
+################################################################################
+#
+# SAMPLE NOTIFICATION COMMANDS
+#
+# These are some example notification commands. They may or may not work on
+# your system without modification. As an example, some systems will require
+# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below.
+#
+################################################################################
+
+
+# 'notify-host-by-email' command definition
+define command{
+ command_name notify-host-by-email
+ command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
+ }
+
+# 'notify-service-by-email' command definition
+define command{
+ command_name notify-service-by-email
+ command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
+ }
+
+
+
+
+
+################################################################################
+#
+# SAMPLE HOST CHECK COMMANDS
+#
+################################################################################
+
+
+# This command checks to see if a host is "alive" by pinging it
+# The check must result in a 100% packet loss or 5 second (5000ms) round trip
+# average time to produce a critical error.
+# Note: Five ICMP echo packets are sent (determined by the '-p 5' argument)
+
+# 'check-host-alive' command definition
+define command{
+ command_name check-host-alive
+ command_line $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5
+ }
+
+
+
+
+################################################################################
+#
+# SAMPLE SERVICE CHECK COMMANDS
+#
+# These are some example service check commands. They may or may not work on
+# your system, as they must be modified for your plugins. See the HTML
+# documentation on the plugins for examples of how to configure command definitions.
+#
+# NOTE: The following 'check_local_...' functions are designed to monitor
+# various metrics on the host that Nagios is running on (i.e. this one).
+################################################################################
+
+# 'check_local_disk' command definition
+define command{
+ command_name check_local_disk
+ command_line $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+ }
+
+
+# 'check_local_load' command definition
+define command{
+ command_name check_local_load
+ command_line $USER1$/check_load -w $ARG1$ -c $ARG2$
+ }
+
+
+# 'check_local_procs' command definition
+define command{
+ command_name check_local_procs
+ command_line $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
+ }
+
+
+# 'check_local_users' command definition
+define command{
+ command_name check_local_users
+ command_line $USER1$/check_users -w $ARG1$ -c $ARG2$
+ }
+
+
+# 'check_local_swap' command definition
+define command{
+ command_name check_local_swap
+ command_line $USER1$/check_swap -w $ARG1$ -c $ARG2$
+ }
+
+
+# 'check_local_mrtgtraf' command definition
+define command{
+ command_name check_local_mrtgtraf
+ command_line $USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
+ }
+
+
+################################################################################
+# NOTE: The following 'check_...' commands are used to monitor services on
+# both local and remote hosts.
+################################################################################
+
+# 'check_ftp' command definition
+define command{
+ command_name check_ftp
+ command_line $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
+ }
+
+
+# 'check_hpjd' command definition
+define command{
+ command_name check_hpjd
+ command_line $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
+ }
+
+
+# 'check_snmp' command definition
+define command{
+ command_name check_snmp
+ command_line $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
+ }
+
+
+# 'check_http' command definition
+define command{
+ command_name check_http
+ command_line $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
+ }
+
+
+# 'check_ssh' command definition
+define command{
+ command_name check_ssh
+ command_line $USER1$/check_ssh $ARG1$ $HOSTADDRESS$
+ }
+
+
+# 'check_dhcp' command definition
+define command{
+ command_name check_dhcp
+ command_line $USER1$/check_dhcp $ARG1$
+ }
+
+
+# 'check_ping' command definition
+define command{
+ command_name check_ping
+ command_line $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
+ }
+
+
+# 'check_pop' command definition
+define command{
+ command_name check_pop
+ command_line $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
+ }
+
+
+# 'check_imap' command definition
+define command{
+ command_name check_imap
+ command_line $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
+ }
+
+
+# 'check_smtp' command definition
+define command{
+ command_name check_smtp
+ command_line $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
+ }
+
+
+# 'check_tcp' command definition
+define command{
+ command_name check_tcp
+ command_line $USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+ }
+
+
+# 'check_udp' command definition
+define command{
+ command_name check_udp
+ command_line $USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+ }
+
+
+# 'check_nt' command definition
+define command{
+ command_name check_nt
+ command_line $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
+ }
+
+
+
+################################################################################
+#
+# SAMPLE PERFORMANCE DATA COMMANDS
+#
+# These are sample performance data commands that can be used to send performance
+# data output to two text files (one for hosts, another for services). If you
+# plan on simply writing performance data out to a file, consider using the
+# host_perfdata_file and service_perfdata_file options in the main config file.
+#
+################################################################################
+
+
+# 'process-host-perfdata' command definition
+define command{
+ command_name process-host-perfdata
+ command_line /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/nagios/host-perfdata.out
+ }
+
+
+# 'process-service-perfdata' command definition
+define command{
+ command_name process-service-perfdata
+ command_line /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/nagios/service-perfdata.out
+ }
+
+
--- /dev/null
+###############################################################################
+# CONTACTS.CFG - SAMPLE CONTACT/CONTACTGROUP DEFINITIONS
+#
+# Last Modified: 05-31-2007
+#
+# NOTES: This config file provides you with some example contact and contact
+# group definitions that you can reference in host and service
+# definitions.
+#
+# You don't need to keep these definitions in a separate file from your
+# other object definitions. This has been done just to make things
+# easier to understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+###############################################################################
+#
+# CONTACTS
+#
+###############################################################################
+###############################################################################
+
+# Just one contact defined by default - the Nagios admin (that's you)
+# This contact definition inherits a lot of default values from the 'generic-contact'
+# template which is defined elsewhere.
+
+define contact{
+ contact_name nagiosadmin ; Short name of user
+ use generic-contact ; Inherit default values from generic-contact template (defined above)
+ alias Nagios Admin ; Full name of user
+
+ email nagios@localhost ; <<***** CHANGE THIS TO YOUR EMAIL ADDRESS ******
+ }
+
+
+
+###############################################################################
+###############################################################################
+#
+# CONTACT GROUPS
+#
+###############################################################################
+###############################################################################
+
+# We only have one contact in this simple configuration file, so there is
+# no need to create more than one contact group.
+
+define contactgroup{
+ contactgroup_name admins
+ alias Nagios Administrators
+ members nagiosadmin
+ }
--- /dev/null
+###############################################################################
+# LOCALHOST.CFG - SAMPLE OBJECT CONFIG FILE FOR MONITORING THIS MACHINE
+#
+# Last Modified: 05-31-2007
+#
+# NOTE: This config file is intended to serve as an *extremely* simple
+# example of how you can create configuration entries to monitor
+# the local (Linux) machine.
+#
+###############################################################################
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST DEFINITION
+#
+###############################################################################
+###############################################################################
+
+# Define a host for the local machine
+
+define host{
+ use linux-server ; Name of host template to use
+ ; This host definition will inherit all variables that are defined
+ ; in (or inherited by) the linux-server host template definition.
+ host_name localhost
+ alias localhost
+ address 127.0.0.1
+ }
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST GROUP DEFINITION
+#
+###############################################################################
+###############################################################################
+
+# Define an optional hostgroup for Linux machines
+
+define hostgroup{
+ hostgroup_name linux-servers ; The name of the hostgroup
+ alias Linux Servers ; Long name of the group
+ members localhost ; Comma separated list of hosts that belong to this group
+ }
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+
+# Define a service to "ping" the local machine
+
+define service{
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description PING
+ check_command check_ping!100.0,20%!500.0,60%
+ }
+
+
+# Define a service to check the disk space of the root partition
+# on the local machine. Warning if < 20% free, critical if
+# < 10% free space on partition.
+
+define service{
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description Root Partition
+ check_command check_local_disk!20%!10%!/
+ }
+
+
+
+# Define a service to check the number of currently logged in
+# users on the local machine. Warning if > 20 users, critical
+# if > 50 users.
+
+define service{
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description Current Users
+ check_command check_local_users!20!50
+ }
+
+
+# Define a service to check the number of currently running procs
+# on the local machine. Warning if > 250 processes, critical if
+# > 400 users.
+
+define service{
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description Total Processes
+ check_command check_local_procs!250!400!RSZDT
+ }
+
+
+
+# Define a service to check the load on the local machine.
+
+define service{
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description Current Load
+ check_command check_local_load!5.0,4.0,3.0!10.0,6.0,4.0
+ }
+
+
+
+# Define a service to check the swap usage the local machine.
+# Critical if less than 10% of swap is free, warning if less than 20% is free
+
+define service{
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description Swap Usage
+ check_command check_local_swap!20!10
+ }
+
+
+
+# Define a service to check SSH on the local machine.
+# Disable notifications for this service by default, as not all users may have SSH enabled.
+
+define service{
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description SSH
+ check_command check_ssh
+ notifications_enabled 0
+ }
+
+
+
+# Define a service to check HTTP on the local machine.
+# Disable notifications for this service by default, as not all users may have HTTP enabled.
+
+define service{
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description HTTP
+ check_command check_http
+ notifications_enabled 0
+ }
+
--- /dev/null
+###############################################################################
+# PRINTER.CFG - SAMPLE CONFIG FILE FOR MONITORING A NETWORK PRINTER
+#
+# Last Modified: 10-03-2007
+#
+# NOTES: This config file assumes that you are using the sample configuration
+# files that get installed with the Nagios quickstart guide.
+#
+###############################################################################
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Define a host for the printer we'll be monitoring
+# Change the host_name, alias, and address to fit your situation
+
+define host{
+ use generic-printer ; Inherit default values from a template
+ host_name hplj2605dn ; The name we're giving to this printer
+ alias HP LaserJet 2605dn ; A longer name associated with the printer
+ address 192.168.1.30 ; IP address of the printer
+ hostgroups network-printers ; Host groups this printer is associated with
+ }
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST GROUP DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# A hostgroup for network printers
+
+define hostgroup{
+ hostgroup_name network-printers ; The name of the hostgroup
+ alias Network Printers ; Long name of the group
+ }
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Create a service for monitoring the status of the printer
+# Change the host_name to match the name of the host you defined above
+# If the printer has an SNMP community string other than "public", change the check_command directive to reflect that
+
+define service{
+ use generic-service ; Inherit values from a template
+ host_name hplj2605dn ; The name of the host the service is associated with
+ service_description Printer Status ; The service description
+ check_command check_hpjd!-C public ; The command used to monitor the service
+ normal_check_interval 10 ; Check the service every 10 minutes under normal conditions
+ retry_check_interval 1 ; Re-check the service every minute until its final/hard state is determined
+ }
+
+
+# Create a service for "pinging" the printer occassionally. Useful for monitoring RTA, packet loss, etc.
+
+define service{
+ use generic-service
+ host_name hplj2605dn
+ service_description PING
+ check_command check_ping!3000.0,80%!5000.0,100%
+ normal_check_interval 10
+ retry_check_interval 1
+ }
--- /dev/null
+###############################################################################
+# SWITCH.CFG - SAMPLE CONFIG FILE FOR MONITORING A SWITCH
+#
+# Last Modified: 10-03-2007
+#
+# NOTES: This config file assumes that you are using the sample configuration
+# files that get installed with the Nagios quickstart guide.
+#
+###############################################################################
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Define the switch that we'll be monitoring
+
+define host{
+ use generic-switch ; Inherit default values from a template
+ host_name linksys-srw224p ; The name we're giving to this switch
+ alias Linksys SRW224P Switch ; A longer name associated with the switch
+ address 192.168.1.253 ; IP address of the switch
+ hostgroups switches ; Host groups this switch is associated with
+ }
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST GROUP DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Create a new hostgroup for switches
+
+define hostgroup{
+ hostgroup_name switches ; The name of the hostgroup
+ alias Network Switches ; Long name of the group
+ }
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Create a service to PING to switch
+
+define service{
+ use generic-service ; Inherit values from a template
+ host_name linksys-srw224p ; The name of the host the service is associated with
+ service_description PING ; The service description
+ check_command check_ping!200.0,20%!600.0,60% ; The command used to monitor the service
+ normal_check_interval 5 ; Check the service every 5 minutes under normal conditions
+ retry_check_interval 1 ; Re-check the service every minute until its final/hard state is determined
+ }
+
+
+# Monitor uptime via SNMP
+
+define service{
+ use generic-service ; Inherit values from a template
+ host_name linksys-srw224p
+ service_description Uptime
+ check_command check_snmp!-C public -o sysUpTime.0
+ }
+
+
+
+# Monitor Port 1 status via SNMP
+
+define service{
+ use generic-service ; Inherit values from a template
+ host_name linksys-srw224p
+ service_description Port 1 Link Status
+ check_command check_snmp!-C public -o ifOperStatus.1 -r 1 -m RFC1213-MIB
+ }
+
+
+
+# Monitor bandwidth via MRTG logs
+
+define service{
+ use generic-service ; Inherit values from a template
+ host_name linksys-srw224p
+ service_description Port 1 Bandwidth Usage
+ check_command check_local_mrtgtraf!/var/lib/mrtg/192.168.1.253_1.log!AVG!1000000,1000000!5000000,5000000!10
+ }
+
+
+
+
+
+
+
+
+
+
+
--- /dev/null
+###############################################################################
+# TEMPLATES.CFG - SAMPLE OBJECT TEMPLATES
+#
+# Last Modified: 10-03-2007
+#
+# NOTES: This config file provides you with some example object definition
+# templates that are refered by other host, service, contact, etc.
+# definitions in other config files.
+#
+# You don't need to keep these definitions in a separate file from your
+# other object definitions. This has been done just to make things
+# easier to understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+###############################################################################
+#
+# CONTACT TEMPLATES
+#
+###############################################################################
+###############################################################################
+
+# Generic contact definition template - This is NOT a real contact, just a template!
+
+define contact{
+ name generic-contact ; The name of this contact template
+ service_notification_period 24x7 ; service notifications can be sent anytime
+ host_notification_period 24x7 ; host notifications can be sent anytime
+ service_notification_options w,u,c,r,f,s ; send notifications for all service states, flapping events, and scheduled downtime events
+ host_notification_options d,u,r,f,s ; send notifications for all host states, flapping events, and scheduled downtime events
+ service_notification_commands notify-service-by-email ; send service notifications via email
+ host_notification_commands notify-host-by-email ; send host notifications via email
+ register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL CONTACT, JUST A TEMPLATE!
+ }
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST TEMPLATES
+#
+###############################################################################
+###############################################################################
+
+# Generic host definition template - This is NOT a real host, just a template!
+
+define host{
+ name generic-host ; The name of this host template
+ notifications_enabled 1 ; Host notifications are enabled
+ event_handler_enabled 1 ; Host event handler is enabled
+ flap_detection_enabled 1 ; Flap detection is enabled
+ failure_prediction_enabled 1 ; Failure prediction is enabled
+ process_perf_data 1 ; Process performance data
+ retain_status_information 1 ; Retain status information across program restarts
+ retain_nonstatus_information 1 ; Retain non-status information across program restarts
+ notification_period 24x7 ; Send host notifications at any time
+ register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
+ }
+
+
+# Linux host definition template - This is NOT a real host, just a template!
+
+define host{
+ name linux-server ; The name of this host template
+ use generic-host ; This template inherits other values from the generic-host template
+ check_period 24x7 ; By default, Linux hosts are checked round the clock
+ check_interval 5 ; Actively check the host every 5 minutes
+ retry_interval 1 ; Schedule host check retries at 1 minute intervals
+ max_check_attempts 10 ; Check each Linux host 10 times (max)
+ check_command check-host-alive ; Default command to check Linux hosts
+ notification_period workhours ; Linux admins hate to be woken up, so we only notify during the day
+ ; Note that the notification_period variable is being overridden from
+ ; the value that is inherited from the generic-host template!
+ notification_interval 120 ; Resend notifications every 2 hours
+ notification_options d,u,r ; Only send notifications for specific host states
+ contact_groups admins ; Notifications get sent to the admins by default
+ register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
+ }
+
+
+
+# Windows host definition template - This is NOT a real host, just a template!
+
+define host{
+ name windows-server ; The name of this host template
+ use generic-host ; Inherit default values from the generic-host template
+ check_period 24x7 ; By default, Windows servers are monitored round the clock
+ check_interval 5 ; Actively check the server every 5 minutes
+ retry_interval 1 ; Schedule host check retries at 1 minute intervals
+ max_check_attempts 10 ; Check each server 10 times (max)
+ check_command check-host-alive ; Default command to check if servers are "alive"
+ notification_period 24x7 ; Send notification out at any time - day or night
+ notification_interval 30 ; Resend notifications every 30 minutes
+ notification_options d,r ; Only send notifications for specific host states
+ contact_groups admins ; Notifications get sent to the admins by default
+ hostgroups windows-servers ; Host groups that Windows servers should be a member of
+ register 0 ; DONT REGISTER THIS - ITS JUST A TEMPLATE
+ }
+
+
+# We define a generic printer template that can be used for most printers we monitor
+
+define host{
+ name generic-printer ; The name of this host template
+ use generic-host ; Inherit default values from the generic-host template
+ check_period 24x7 ; By default, printers are monitored round the clock
+ check_interval 5 ; Actively check the printer every 5 minutes
+ retry_interval 1 ; Schedule host check retries at 1 minute intervals
+ max_check_attempts 10 ; Check each printer 10 times (max)
+ check_command check-host-alive ; Default command to check if printers are "alive"
+ notification_period workhours ; Printers are only used during the workday
+ notification_interval 30 ; Resend notifications every 30 minutes
+ notification_options d,r ; Only send notifications for specific host states
+ contact_groups admins ; Notifications get sent to the admins by default
+ register 0 ; DONT REGISTER THIS - ITS JUST A TEMPLATE
+ }
+
+
+# Define a template for switches that we can reuse
+define host{
+ name generic-switch ; The name of this host template
+ use generic-host ; Inherit default values from the generic-host template
+ check_period 24x7 ; By default, switches are monitored round the clock
+ check_interval 5 ; Switches are checked every 5 minutes
+ retry_interval 1 ; Schedule host check retries at 1 minute intervals
+ max_check_attempts 10 ; Check each switch 10 times (max)
+ check_command check-host-alive ; Default command to check if routers are "alive"
+ notification_period 24x7 ; Send notifications at any time
+ notification_interval 30 ; Resend notifications every 30 minutes
+ notification_options d,r ; Only send notifications for specific host states
+ contact_groups admins ; Notifications get sent to the admins by default
+ register 0 ; DONT REGISTER THIS - ITS JUST A TEMPLATE
+ }
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE TEMPLATES
+#
+###############################################################################
+###############################################################################
+
+# Generic service definition template - This is NOT a real service, just a template!
+
+define service{
+ name generic-service ; The 'name' of this service template
+ active_checks_enabled 1 ; Active service checks are enabled
+ passive_checks_enabled 1 ; Passive service checks are enabled/accepted
+ parallelize_check 1 ; Active service checks should be parallelized (disabling this can lead to major performance problems)
+ obsess_over_service 1 ; We should obsess over this service (if necessary)
+ check_freshness 0 ; Default is to NOT check service 'freshness'
+ notifications_enabled 1 ; Service notifications are enabled
+ event_handler_enabled 1 ; Service event handler is enabled
+ flap_detection_enabled 1 ; Flap detection is enabled
+ failure_prediction_enabled 1 ; Failure prediction is enabled
+ process_perf_data 1 ; Process performance data
+ retain_status_information 1 ; Retain status information across program restarts
+ retain_nonstatus_information 1 ; Retain non-status information across program restarts
+ is_volatile 0 ; The service is not volatile
+ check_period 24x7 ; The service can be checked at any time of the day
+ max_check_attempts 3 ; Re-check the service up to 3 times in order to determine its final (hard) state
+ normal_check_interval 10 ; Check the service every 10 minutes under normal conditions
+ retry_check_interval 2 ; Re-check the service every two minutes until a hard state can be determined
+ contact_groups admins ; Notifications get sent out to everyone in the 'admins' group
+ notification_options w,u,c,r ; Send notifications about warning, unknown, critical, and recovery events
+ notification_interval 60 ; Re-notify about service problems every hour
+ notification_period 24x7 ; Notifications can be sent out at any time
+ register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
+ }
+
+
+# Local service definition template - This is NOT a real service, just a template!
+
+define service{
+ name local-service ; The name of this service template
+ use generic-service ; Inherit default values from the generic-service definition
+ max_check_attempts 4 ; Re-check the service up to 4 times in order to determine its final (hard) state
+ normal_check_interval 5 ; Check the service every 5 minutes under normal conditions
+ retry_check_interval 1 ; Re-check the service every minute until a hard state can be determined
+ register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
+ }
+
--- /dev/null
+###############################################################################
+# TIMEPERIODS.CFG - SAMPLE TIMEPERIOD DEFINITIONS
+#
+# Last Modified: 05-31-2007
+#
+# NOTES: This config file provides you with some example timeperiod definitions
+# that you can reference in host, service, contact, and dependency
+# definitions.
+#
+# You don't need to keep timeperiods in a separate file from your other
+# object definitions. This has been done just to make things easier to
+# understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+###############################################################################
+#
+# TIME PERIODS
+#
+###############################################################################
+###############################################################################
+
+# This defines a timeperiod where all times are valid for checks,
+# notifications, etc. The classic "24x7" support nightmare. :-)
+define timeperiod{
+ timeperiod_name 24x7
+ alias 24 Hours A Day, 7 Days A Week
+ sunday 00:00-24:00
+ monday 00:00-24:00
+ tuesday 00:00-24:00
+ wednesday 00:00-24:00
+ thursday 00:00-24:00
+ friday 00:00-24:00
+ saturday 00:00-24:00
+ }
+
+
+# 'workhours' timeperiod definition
+define timeperiod{
+ timeperiod_name workhours
+ alias Normal Work Hours
+ monday 09:00-17:00
+ tuesday 09:00-17:00
+ wednesday 09:00-17:00
+ thursday 09:00-17:00
+ friday 09:00-17:00
+ }
+
+
+# 'none' timeperiod definition
+define timeperiod{
+ timeperiod_name none
+ alias No Time Is A Good Time
+ }
+
+
+# Some U.S. holidays
+# Note: The timeranges for each holiday are meant to *exclude* the holidays from being
+# treated as a valid time for notifications, etc. You probably don't want your pager
+# going off on New Year's. Although you're employer might... :-)
+define timeperiod{
+ name us-holidays
+ timeperiod_name us-holidays
+ alias U.S. Holidays
+
+ january 1 00:00-00:00 ; New Years
+ monday -1 may 00:00-00:00 ; Memorial Day (last Monday in May)
+ july 4 00:00-00:00 ; Independence Day
+ monday 1 september 00:00-00:00 ; Labor Day (first Monday in September)
+ thursday 4 november 00:00-00:00 ; Thanksgiving (4th Thursday in November)
+ december 25 00:00-00:00 ; Christmas
+ }
+
+
+# This defines a modified "24x7" timeperiod that covers every day of the
+# year, except for U.S. holidays (defined in the timeperiod above).
+define timeperiod{
+ timeperiod_name 24x7_sans_holidays
+ alias 24x7 Sans Holidays
+
+ use us-holidays ; Get holiday exceptions from other timeperiod
+
+ sunday 00:00-24:00
+ monday 00:00-24:00
+ tuesday 00:00-24:00
+ wednesday 00:00-24:00
+ thursday 00:00-24:00
+ friday 00:00-24:00
+ saturday 00:00-24:00
+ }
+
--- /dev/null
+###############################################################################
+# WINDOWS.CFG - SAMPLE CONFIG FILE FOR MONITORING A WINDOWS MACHINE
+#
+# Last Modified: 06-13-2007
+#
+# NOTES: This config file assumes that you are using the sample configuration
+# files that get installed with the Nagios quickstart guide.
+#
+###############################################################################
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Define a host for the Windows machine we'll be monitoring
+# Change the host_name, alias, and address to fit your situation
+
+define host{
+ use windows-server ; Inherit default values from a template
+ host_name winserver ; The name we're giving to this host
+ alias My Windows Server ; A longer name associated with the host
+ address 192.168.1.2 ; IP address of the host
+ }
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST GROUP DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+
+# Define a hostgroup for Windows machines
+# All hosts that use the windows-server template will automatically be a member of this group
+
+define hostgroup{
+ hostgroup_name windows-servers ; The name of the hostgroup
+ alias Windows Servers ; Long name of the group
+ }
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+
+# Create a service for monitoring the version of NSCLient++ that is installed
+# Change the host_name to match the name of the host you defined above
+
+define service{
+ use generic-service
+ host_name winserver
+ service_description NSClient++ Version
+ check_command check_nt!CLIENTVERSION
+ }
+
+
+
+# Create a service for monitoring the uptime of the server
+# Change the host_name to match the name of the host you defined above
+
+define service{
+ use generic-service
+ host_name winserver
+ service_description Uptime
+ check_command check_nt!UPTIME
+ }
+
+
+
+# Create a service for monitoring CPU load
+# Change the host_name to match the name of the host you defined above
+
+define service{
+ use generic-service
+ host_name winserver
+ service_description CPU Load
+ check_command check_nt!CPULOAD!-l 5,80,90
+ }
+
+
+
+# Create a service for monitoring memory usage
+# Change the host_name to match the name of the host you defined above
+
+define service{
+ use generic-service
+ host_name winserver
+ service_description Memory Usage
+ check_command check_nt!MEMUSE!-w 80 -c 90
+ }
+
+
+
+# Create a service for monitoring C:\ disk usage
+# Change the host_name to match the name of the host you defined above
+
+define service{
+ use generic-service
+ host_name winserver
+ service_description C:\ Drive Space
+ check_command check_nt!USEDDISKSPACE!-l c -w 80 -c 90
+ }
+
+
+
+# Create a service for monitoring the W3SVC service
+# Change the host_name to match the name of the host you defined above
+
+define service{
+ use generic-service
+ host_name winserver
+ service_description W3SVC
+ check_command check_nt!SERVICESTATE!-d SHOWALL -l W3SVC
+ }
+
+
+
+# Create a service for monitoring the Explorer.exe process
+# Change the host_name to match the name of the host you defined above
+
+define service{
+ use generic-service
+ host_name winserver
+ service_description Explorer
+ check_command check_nt!PROCSTATE!-d SHOWALL -l Explorer.exe
+ }
+
--- /dev/null
+###########################################################################
+#
+# RESOURCE.CFG - Sample Resource File for Nagios 3.3.1
+#
+# Last Modified: 09-10-2003
+#
+# You can define $USERx$ macros in this file, which can in turn be used
+# in command definitions in your host config file(s). $USERx$ macros are
+# useful for storing sensitive information such as usernames, passwords,
+# etc. They are also handy for specifying the path to plugins and
+# event handlers - if you decide to move the plugins or event handlers to
+# a different directory in the future, you can just update one or two
+# $USERx$ macros, instead of modifying a lot of command definitions.
+#
+# The CGIs will not attempt to read the contents of resource files, so
+# you can set restrictive permissions (600 or 660) on them.
+#
+# Nagios supports up to 32 $USERx$ macros ($USER1$ through $USER32$)
+#
+# Resource files may also be used to store configuration directives for
+# external data sources like MySQL...
+#
+###########################################################################
+
+# Sets $USER1$ to be the path to the plugins
+$USER1$=/usr/lib64/nagios/plugins
+
+# Sets $USER2$ to be the path to event handlers
+#$USER2$=/usr/lib64/nagios/plugins/eventhandlers
+
+# Store some usernames and passwords (hidden from the CGIs)
+#$USER3$=someuser
+#$USER4$=somepassword
+
projects / config / uhu1 / etc.git / commitdiff