mkdir -p './gtk-2.0/x86_64-pc-linux-gnu'
mkdir -p './lvm/cache'
mkdir -p './pango/x86_64-pc-linux-gnu'
+mkdir -p './php/apache2-php5.6/ext'
+mkdir -p './php/apache2-php5.6/ext-active'
+mkdir -p './php/cgi-php5.6/ext'
+mkdir -p './php/cgi-php5.6/ext-active'
+mkdir -p './php/cli-php5.6/ext'
+mkdir -p './php/cli-php5.6/ext-active'
+mkdir -p './php/embed-php5.6/ext'
+mkdir -p './php/embed-php5.6/ext-active'
+mkdir -p './php/fpm-php5.6/ext'
+mkdir -p './php/fpm-php5.6/ext-active'
mkdir -p './postfix/postfix-files.d'
mkdir -p './salt/pki/minions_pre'
mkdir -p './salt/pki/minions_rejected'
maybe chmod 0644 'bash/bashrc'
maybe chmod 0755 'bash/bashrc.d'
maybe chmod 0644 'bash/bashrc.d/.keep_app-shells_bash-0'
+maybe chmod 0644 'bash/bashrc.d/bash_completion.sh'
maybe chmod 0755 'bash_completion.d'
+maybe chmod 0644 'bash_completion.d/gentoo-style-init'
maybe chown 'named' 'bind'
maybe chmod 0755 'bind'
maybe chgrp 'named' 'bind/bind.keys'
maybe chmod 0644 'config-archive/etc/logrotate.d/clamav.dist'
maybe chmod 0644 'config-archive/etc/logrotate.d/fail2ban'
maybe chmod 0644 'config-archive/etc/logrotate.d/fail2ban.dist.new'
+maybe chmod 0644 'config-archive/etc/logrotate.d/openrc'
+maybe chmod 0644 'config-archive/etc/logrotate.d/openrc.dist'
maybe chmod 0644 'config-archive/etc/logrotate.d/syslog-ng'
maybe chmod 0644 'config-archive/etc/logrotate.d/syslog-ng.dist.new'
maybe chmod 0644 'config-archive/etc/logrotate.d/ulogd'
maybe chmod 0644 'config-archive/etc/logrotate.d/ulogd.1'
maybe chmod 0644 'config-archive/etc/logrotate.d/ulogd.dist'
-maybe chmod 0644 'config-archive/etc/logrotate.d/ulogd.dist.new'
maybe chmod 0755 'config-archive/etc/lvm'
maybe chmod 0644 'config-archive/etc/lvm/lvm.conf'
maybe chmod 0644 'config-archive/etc/lvm/lvm.conf.dist'
maybe chmod 0644 'config-archive/etc/rc.conf.1'
maybe chmod 0644 'config-archive/etc/rc.conf.2'
maybe chmod 0644 'config-archive/etc/rc.conf.3'
+maybe chmod 0644 'config-archive/etc/rc.conf.4'
maybe chmod 0644 'config-archive/etc/rc.conf.dist'
maybe chmod 0644 'config-archive/etc/request-key.conf'
maybe chmod 0644 'config-archive/etc/request-key.conf.dist'
maybe chmod 0644 'env.d/10bind'
maybe chmod 0644 'env.d/20java-config'
maybe chmod 0644 'env.d/20php5.5'
+maybe chmod 0644 'env.d/20php5.6'
+maybe chmod 0644 'env.d/20stunnel'
maybe chmod 0644 'env.d/30gnupg'
maybe chmod 0644 'env.d/30xdg-data-local'
maybe chmod 0644 'env.d/37fontconfig'
-maybe chmod 0644 'env.d/50bash_completion'
maybe chmod 0644 'env.d/50guile'
maybe chmod 0644 'env.d/50ncurses'
maybe chmod 0644 'env.d/50postgresql'
-maybe chmod 0644 'env.d/60ladspa'
maybe chmod 0644 'env.d/60python-docs-2.7'
maybe chmod 0644 'env.d/60python-docs-3.3'
maybe chmod 0644 'env.d/70less'
maybe chmod 0755 'init.d/atd'
maybe chmod 0755 'init.d/auditd'
maybe chmod 0755 'init.d/autofs'
+maybe chmod 0755 'init.d/binfmt'
maybe chmod 0755 'init.d/bootmisc'
maybe chmod 0755 'init.d/busybox-klogd'
maybe chmod 0755 'init.d/busybox-ntpd'
maybe chmod 0755 'init.d/ntpd'
maybe chmod 0755 'init.d/numlock'
maybe chmod 0755 'init.d/openvpn'
+maybe chmod 0755 'init.d/osclock'
maybe chmod 0755 'init.d/pciparm'
maybe chmod 0755 'init.d/php-fpm'
maybe chmod 0755 'init.d/policyd-weight'
maybe chmod 0755 'init.d/rpc.rquotad'
maybe chmod 0755 'init.d/rpcbind'
maybe chmod 0755 'init.d/rsyncd'
+maybe chmod 0755 'init.d/s6-svscan'
maybe chmod 0755 'init.d/samba'
maybe chmod 0755 'init.d/saslauthd'
maybe chmod 0755 'init.d/savecache'
maybe chmod 0755 'php/apache2-php5.5/ext-active'
maybe chmod 0644 'php/apache2-php5.5/ext/imagick.ini'
maybe chmod 0644 'php/apache2-php5.5/php.ini'
+maybe chmod 0755 'php/apache2-php5.6'
+maybe chmod 0755 'php/apache2-php5.6/ext'
+maybe chmod 0755 'php/apache2-php5.6/ext-active'
+maybe chmod 0644 'php/apache2-php5.6/php.ini'
maybe chmod 0755 'php/cgi-php5.5'
maybe chmod 0755 'php/cgi-php5.5/ext'
maybe chmod 0755 'php/cgi-php5.5/ext-active'
maybe chmod 0644 'php/cgi-php5.5/ext/imagick.ini'
maybe chmod 0644 'php/cgi-php5.5/php.ini'
+maybe chmod 0755 'php/cgi-php5.6'
+maybe chmod 0755 'php/cgi-php5.6/ext'
+maybe chmod 0755 'php/cgi-php5.6/ext-active'
+maybe chmod 0644 'php/cgi-php5.6/php.ini'
maybe chmod 0755 'php/cli-php5.3'
maybe chmod 0644 'php/cli-php5.3/php.ini'
maybe chmod 0755 'php/cli-php5.5'
maybe chmod 0755 'php/cli-php5.5/ext-active'
maybe chmod 0644 'php/cli-php5.5/ext/imagick.ini'
maybe chmod 0644 'php/cli-php5.5/php.ini'
+maybe chmod 0755 'php/cli-php5.6'
+maybe chmod 0755 'php/cli-php5.6/ext'
+maybe chmod 0755 'php/cli-php5.6/ext-active'
+maybe chmod 0644 'php/cli-php5.6/php.ini'
maybe chmod 0755 'php/embed-php5.5'
maybe chmod 0755 'php/embed-php5.5/ext'
maybe chmod 0755 'php/embed-php5.5/ext-active'
maybe chmod 0644 'php/embed-php5.5/ext/imagick.ini'
maybe chmod 0644 'php/embed-php5.5/php.ini'
+maybe chmod 0755 'php/embed-php5.6'
+maybe chmod 0755 'php/embed-php5.6/ext'
+maybe chmod 0755 'php/embed-php5.6/ext-active'
+maybe chmod 0644 'php/embed-php5.6/php.ini'
maybe chmod 0755 'php/fpm-php5.5'
maybe chmod 0755 'php/fpm-php5.5/ext'
maybe chmod 0755 'php/fpm-php5.5/ext-active'
maybe chmod 0644 'php/fpm-php5.5/ext/imagick.ini'
maybe chmod 0644 'php/fpm-php5.5/php-fpm.conf'
maybe chmod 0644 'php/fpm-php5.5/php.ini'
+maybe chmod 0755 'php/fpm-php5.6'
+maybe chmod 0755 'php/fpm-php5.6/ext'
+maybe chmod 0755 'php/fpm-php5.6/ext-active'
+maybe chmod 0644 'php/fpm-php5.6/php-fpm.conf'
+maybe chmod 0644 'php/fpm-php5.6/php.ini'
maybe chmod 0755 'pkcs11'
maybe chmod 0644 'pkcs11/pkcs11.conf.example'
maybe chmod 0644 'policyd-weight.conf'
maybe chmod 0644 'profile'
maybe chmod 0755 'profile.d'
maybe chmod 0644 'profile.d/.keep'
-maybe chmod 0644 'profile.d/bash-completion.sh'
maybe chmod 0644 'profile.d/java-config-2.csh'
maybe chmod 0644 'profile.d/java-config-2.sh'
maybe chmod 0644 'profile.env'
maybe chmod 0644 'xdg/autostart/gnome-keyring-pkcs11.desktop'
maybe chmod 0644 'xdg/autostart/gnome-keyring-secrets.desktop'
maybe chmod 0644 'xdg/autostart/gnome-keyring-ssh.desktop'
-maybe chmod 0644 'xdg/autostart/user-dirs-update-gtk.desktop'
-maybe chmod 0644 'xdg/user-dirs.conf'
-maybe chmod 0644 'xdg/user-dirs.defaults'
maybe chmod 0755 'xinetd.d'
maybe chmod 0644 'xinetd.d/nrpe'
maybe chmod 0644 'xinetd.d/rsyncd'
# Enable history appending instead of overwriting when exiting. #139609
shopt -s histappend
+# Save each command to the history file as it's executed. #517342
+# This does mean sessions get interleaved when reading later on, but this
+# way the history is always up to date. History is not synced across live
+# sessions though; that is what `history -n` does.
+# Disabled by default due to concerns related to system recovery when $HOME
+# is under duress, or lives somewhere flaky (like NFS). Constantly syncing
+# the history will halt the shell prompt until it's finished.
+#PROMPT_COMMAND='history -a'
+
# Change the window title of X terminals
case ${TERM} in
xterm*|rxvt*|Eterm*|aterm|kterm|gnome*|interix|konsole*)
--- /dev/null
+# Check for interactive bash and that we haven't already been sourced.
+if [ -n "$BASH_VERSION" -a -n "$PS1" -a -z "$BASH_COMPLETION_COMPAT_DIR" ]; then
+
+ # Check for recent enough version of bash.
+ if [ ${BASH_VERSINFO[0]} -gt 4 ] || \
+ [ ${BASH_VERSINFO[0]} -eq 4 -a ${BASH_VERSINFO[1]} -ge 1 ]; then
+ [ -r "${XDG_CONFIG_HOME:-$HOME/.config}/bash_completion" ] && \
+ . "${XDG_CONFIG_HOME:-$HOME/.config}/bash_completion"
+ if shopt -q progcomp && [ -r /usr/share/bash-completion/bash_completion ]; then
+ # Source completion code.
+ . /usr/share/bash-completion/bash_completion
+ fi
+ fi
+
+fi
--- /dev/null
+# Gentoo init.d completion
+#
+# $Id$
+#
+# Copyright 1999-2009 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License, v2 or later
+
+_gentoo_style_init()
+{
+ local script="${COMP_WORDS[0]}"
+ local cur="${COMP_WORDS[$COMP_CWORD]}"
+
+ if [[ ( -f "${script}" || -h "${script}" ) && -r "${script}" ]] \
+ && [[ "${script}" != *.sh ]] \
+ && [[ "$(head -n 1 "${script}")" = "#!/sbin/runscript" ]]
+ then
+ [[ $COMP_CWORD -gt 1 ]] && return 1
+ COMPREPLY=($(opts="start stop status restart pause zap ineed needsme iuse usesme broken"; \
+ eval "$(grep '^opts=' "${script}")"; echo "${opts}"))
+ [[ -n "$COMPREPLY" ]] || COMPREPLY=(start stop restart zap)
+ COMPREPLY=($(compgen -W "${COMPREPLY[*]}" -- "${cur}"))
+ else
+ COMPREPLY=($(compgen -o default -- "${cur}"))
+ fi
+ return 0
+}
+complete -F _gentoo_style_init /etc/init.d/*
--- /dev/null
+/var/log/rc.log {
+ compress
+ rotate 4
+ weekly
+ missingok
+ notifempty
+}
+
+# vim: ts=4 filetype=conf
--- /dev/null
+/var/log/rc.log {
+ missingok
+ notifempty
+}
-/var/log/ulogd/ulogd.log {
+/var/log/ulogd/*.log {
+ sharedscripts
+ missingok
notifempty
- size 1M
create 0640 ulogd
postrotate
- /etc/init.d/ulogd reopen_logs > /dev/null
- endscript
-}
-
-/var/log/ulogd/ulogd_syslogemu.log {
- rotate 12
- size 5M
- notifempty
- create 0640 ulogd
- postrotate
- /etc/init.d/ulogd reopen_logs > /dev/null
+ [ -f /run/ulogd.pid ] && /bin/kill -HUP $(cat /run/ulogd.pid)
endscript
}
+++ /dev/null
-/var/log/ulogd/ulogd.log /var/log/ulogd/ulogd_syslogemu.log {
- sharedscripts
- missingok
- notifempty
- create 0640 ulogd
- postrotate
- /etc/init.d/ulogd reopen_logs > /dev/null
- endscript
-}
# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.
+# COMPATIBILITY
+#
+# The compatibility_level determines what default settings Postfix
+# will use for main.cf and master.cf settings. These defaults will
+# change over time.
+#
+# To avoid breaking things, Postfix will use backwards-compatible
+# default settings and log where it uses those old backwards-compatible
+# default settings, until the system administrator has determined
+# if any backwards-compatible default settings need to be made
+# permanent in main.cf or master.cf.
+#
+# When this review is complete, update the compatibility_level setting
+# below as recommended in the RELEASE_NOTES file.
+#
+# The level below is what should be used with new (not upgrade) installs.
+#
+#compatibility_level = 2
+compatibility_level = 2
+
# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.11.3/html
+html_directory = /usr/share/doc/postfix-3.0.0/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.11.3/readme
+readme_directory = /usr/share/doc/postfix-3.0.0/readme
+inet_protocols = all
+meta_directory = /etc/postfix
+shlib_directory = /usr/lib64/postfix/${mail_version}
home_mailbox = .maildir/
broken_sasl_auth_clients = yes
smtpd_tls_session_cache_timeout = 3600s
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
+append_dot_mydomain = yes
+mynetworks_style = subnet
+relay_domains = $mydestination
+smtputf8_enable = yes
# For common configuration examples, see BASIC_CONFIGURATION_README
# and STANDARD_CONFIGURATION_README. To find these documents, use
# the command "postconf html_directory readme_directory", or go to
-# http://www.postfix.org/.
+# http://www.postfix.org/BASIC_CONFIGURATION_README.html etc.
#
# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.3/html
+html_directory = /usr/share/doc/postfix-2.11.3/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.3/readme
+readme_directory = /usr/share/doc/postfix-2.11.3/readme
home_mailbox = .maildir/
broken_sasl_auth_clients = yes
mydomain = uhu-banane.de
# default: mynetworks = 127.0.0.0/8 46.16.73.175/32 [::1]/128 [fe80::%eth0]/64
-mynetworks = 127.0.0.0/8 46.16.73.175/32 [::1]/128
+mynetworks = 127.0.0.0/8 208.94.38.84/32 46.16.73.175/32 [::1]/128
myorigin = $mydomain
recipient_delimiter = +
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.2/html
+html_directory = /usr/share/doc/postfix-2.10.3/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.2/readme
+readme_directory = /usr/share/doc/postfix-2.10.3/readme
home_mailbox = .maildir/
broken_sasl_auth_clients = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.1/html
+html_directory = /usr/share/doc/postfix-2.10.2/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.1/readme
+readme_directory = /usr/share/doc/postfix-2.10.2/readme
home_mailbox = .maildir/
broken_sasl_auth_clients = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.0/html
+html_directory = /usr/share/doc/postfix-2.10.1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.0/readme
+readme_directory = /usr/share/doc/postfix-2.10.1/readme
home_mailbox = .maildir/
broken_sasl_auth_clients = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.5/html
+html_directory = /usr/share/doc/postfix-2.10.0/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.5/readme
+readme_directory = /usr/share/doc/postfix-2.10.0/readme
home_mailbox = .maildir/
broken_sasl_auth_clients = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.4/html
+html_directory = /usr/share/doc/postfix-2.9.5/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.4/readme
+readme_directory = /usr/share/doc/postfix-2.9.5/readme
home_mailbox = .maildir/
broken_sasl_auth_clients = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.3/html
+html_directory = /usr/share/doc/postfix-2.9.4/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.3/readme
+readme_directory = /usr/share/doc/postfix-2.9.4/readme
home_mailbox = .maildir/
broken_sasl_auth_clients = yes
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
-daemon_directory = /usr/lib64/postfix
+daemon_directory = /usr/libexec/postfix
# The data_directory parameter specifies the location of Postfix-writable
# data files (caches, random numbers). This directory must be owned
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
-#mailbox_transport = lmtp:unix:/file/name
+# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd"
+# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf.
+#mailbox_transport = lmtp:unix:/var/imap/socket/lmtp
+#
+# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and
+# subsequent line in master.cf.
#mailbox_transport = cyrus
# The fallback_transport specifies the optional transport in master.cf
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.8.9/html
+html_directory = /usr/share/doc/postfix-2.9.3/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.8.9/readme
+readme_directory = /usr/share/doc/postfix-2.9.3/readme
home_mailbox = .maildir/
broken_sasl_auth_clients = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.8.7/html
+html_directory = /usr/share/doc/postfix-2.8.9/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.8.7/readme
+readme_directory = /usr/share/doc/postfix-2.8.9/readme
home_mailbox = .maildir/
broken_sasl_auth_clients = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-3.0.0/html
+html_directory = /usr/share/doc/postfix-3.0.1-r1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-3.0.0/readme
+readme_directory = /usr/share/doc/postfix-3.0.1-r1/readme
inet_protocols = ipv4
meta_directory = /etc/postfix
shlib_directory = /usr/lib64/postfix/${mail_version}
# The default value is: /var/log/rc.log
rc_log_path="/var/log/rc.log"
+# If you want verbose output for OpenRC, set this to yes. If you want
+# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
+#rc_verbose=no
+
# By default we filter the environment for our running scripts. To allow other
# variables through, add them here. Use a * to allow all variables through.
#rc_env_allow="VAR1 VAR2"
#rc_crashed_stop=NO
#rc_crashed_start=YES
+# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
+# output.
+#rc_nocolor=NO
+
##############################################################################
# MISC CONFIGURATION VARIABLES
# There variables are shared between many init scripts
# Below is the default list of network fstypes.
#
-# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
# nfs nfs4 ocfs2 shfs smbfs
#
# If you would like to add to this list, you can do so by adding your
# Set unicode to YES to turn on unicode support for keyboards and screens.
unicode="YES"
+# This is how long fuser should wait for a remote server to respond. The
+# default is 60 seconds, but it can be adjusted here.
+#rc_fuser_timeout=60
+
# Below is the default list of network fstypes.
#
# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
-#export SSD_NICELEVEL="-19"
+#SSD_NICELEVEL="-19"
# Pass ulimit parameters
#rc_ulimit="-u 30"
# consolefont, numlock, etc ...)
rc_tty_number=12
+##############################################################################
+# CGROUPS RESOURCE MANAGEMENT
+
# If you have cgroups turned on in your kernel, this switch controls
# whether or not a group for each controller is mounted under
# /sys/fs/cgroup.
-# Support for process management by cgroups is planned in the future,
-# so if you turn this off, be aware that you may not be able to use that
-# feature.
+# None of the other options in this section work if this is set to "NO".
#rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroup
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+#For more information about the adjustments that can be made with
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set this to YES if yu want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# This should not be set globally because it kills all of the service's
+# child processes, and most of the time this is undesirable. Please set
+# it in /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# rc_cgroup_cleanup="NO"
rc_tty_number=12
# If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controler is mounted under
+# whether or not a group for each controller is mounted under
# /sys/fs/cgroup.
# Support for process management by cgroups is planned in the future,
# so if you turn this off, be aware that you may not be able to use that
# These variables are documented here, but should be configured in
# /etc/conf.d/foo for service foo and NOT enabled here unless you
# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
#rc_foo_need="openvpn"
#rc_foo_after="clock"
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
# You can also remove dependencies.
# This is mainly used for saying which servies do NOT provide net.
#rc_net_tap0_provide="!net"
# "vserver" - Linux vserver
# "xen0" - Xen0 Domain
# "xenU" - XenU Domain
-# If this is commented out, automatic detection will be attempted.
-# Note that autodetection will not work in a prefix environment or in a
-# linux container.
+# If this is commented out, automatic detection will be used.
#
# This should be set to the value representing the environment this file is
# PRESENTLY in, not the virtualization the environment is capable of.
# consolefont, numlock, etc ...)
rc_tty_number=12
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controler is mounted under
+# /sys/fs/cgroup.
+# Support for process management by cgroups is planned in the future,
+# so if you turn this off, be aware that you may not be able to use that
+# feature.
+#rc_controller_cgroups="YES"
--- /dev/null
+# Global OpenRC configuration settings
+
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with its name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
+rc_parallel="YES"
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
+#rc_interactive="YES"
+rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+rc_shell=/sbin/sulogin
+
+# Do we allow any started service in the runlevel to satisfy the dependency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+#rc_depend_strict="YES"
+
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be plugged.
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+rc_logger="YES"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+rc_log_path="/var/log/rc.log"
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+unicode="YES"
+
+# Below is the default list of network fstypes.
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#export SSD_NICELEVEL="-19"
+
+# Pass ulimit parameters
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which servies do NOT provide net.
+#rc_net_tap0_provide="!net"
+
+##############################################################################
+# LINUX SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on Linux:
+# "" - nothing special
+# "lxc" - Linux Containers
+# "openvz" - Linux OpenVZ
+# "prefix" - Prefix
+# "uml" - Usermode Linux
+# "vserver" - Linux vserver
+# "xen0" - Xen0 Domain
+# "xenU" - XenU Domain
+# If this is commented out, automatic detection will be attempted.
+# Note that autodetection will not work in a prefix environment or in a
+# linux container.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+rc_sys=""
+
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+rc_tty_number=12
+
#SSD_NICELEVEL="-19"
# Pass ulimit parameters
+# If you are using bash in POSIX mode for your shell, note that the
+# ulimit command uses a block size of 512 bytes for the -c and -f
+# options
#rc_ulimit="-u 30"
# It's possible to define extra dependencies for services like so
# LINUX SPECIFIC OPTIONS
# This is the subsystem type. Valid options on Linux:
-# "" - nothing special
-# "lxc" - Linux Containers
-# "openvz" - Linux OpenVZ
-# "prefix" - Prefix
-# "uml" - Usermode Linux
-# "vserver" - Linux vserver
-# "xen0" - Xen0 Domain
-# "xenU" - XenU Domain
+# "" - nothing special
+# "lxc" - Linux Containers
+# "openvz" - Linux OpenVZ
+# "prefix" - Prefix
+# "uml" - Usermode Linux
+# "vserver" - Linux vserver
+# "systemd-nspawn" - Container created by the systemd-nspawn utility
+# "xen0" - Xen0 Domain
+# "xenU" - XenU Domain
# If this is commented out, automatic detection will be used.
#
# This should be set to the value representing the environment this file is
# DO NOT EDIT THIS FILE. CHANGES TO STARTUP PROFILES
# GO INTO /etc/csh.cshrc NOT /etc/csh.env
-setenv CONFIG_PROTECT '/var/bind /usr/share/gnupg/qualified.txt'
-setenv CONFIG_PROTECT_MASK '/etc/gentoo-release /etc/sandbox.d /etc/php/cli-php5.5/ext-active/ /etc/php/cgi-php5.5/ext-active/ /etc/php/apache2-php5.5/ext-active/ /etc/fonts/fonts.conf /etc/terminfo /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
+setenv CONFIG_PROTECT '/var/bind /etc/stunnel/stunnel.conf /usr/share/gnupg/qualified.txt'
+setenv CONFIG_PROTECT_MASK '/etc/gentoo-release /etc/sandbox.d /etc/php/cli-php5.5/ext-active/ /etc/php/cgi-php5.5/ext-active/ /etc/php/apache2-php5.5/ext-active/ /etc/php/cli-php5.6/ext-active/ /etc/php/cgi-php5.6/ext-active/ /etc/php/apache2-php5.6/ext-active/ /etc/fonts/fonts.conf /etc/terminfo /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
setenv CVS_RSH 'ssh'
setenv EDITOR '/usr/bin/vi'
-setenv ES_BASHCOMP_DIRS '/usr/share/bash-completion/completions'
setenv GCC_SPECS ''
setenv GUILE_LOAD_PATH '/usr/share/guile/1.8'
setenv HG '/usr/bin/hg'
setenv INFOPATH '/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.4/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/info'
-setenv LADSPA_PATH '/usr/lib64/ladspa'
setenv LESS '-R -M --shift 5'
setenv LESSOPEN '|lesspipe %s'
-setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.5/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.4/man/'
+setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.5/man/:/usr/lib64/php5.6/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.4/man/'
setenv MULTIOSDIRS '../lib64:../lib32'
setenv OPENGL_PROFILE 'xorg-x11'
setenv PATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.4:/usr/lib64/subversion/bin'
#clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
+# Some non-RFC compliant DHCP servers do not reply with this set.
+# In this case, comment out duid and enable clientid above.
duid
# Persist interface configuration when dhcpcd exits.
--- /dev/null
+MANPATH="/usr/lib64/php5.6/man/"
+CONFIG_PROTECT_MASK="/etc/php/cli-php5.6/ext-active/ /etc/php/cgi-php5.6/ext-active/ /etc/php/apache2-php5.6/ext-active/"
--- /dev/null
+CONFIG_PROTECT="/etc/stunnel/stunnel.conf"
+++ /dev/null
-ES_BASHCOMP_DIRS="/usr/share/bash-completion/completions"
+++ /dev/null
-LADSPA_PATH=/usr/lib64/ladspa
-postgres_ebuilds="${postgres_ebuilds} postgresql-9.4.2"
+postgres_ebuilds="${postgres_ebuilds} postgresql-9.4.3"
--- /dev/null
+#!/sbin/openrc-run
+# Copyright 2015 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+description="Register misc binary format handlers"
+
+depend()
+{
+ after procfs
+ use modules devfs
+ keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+}
+
+start()
+{
+ ebegin "Loading custom binary format handlers"
+ "$RC_LIBEXECDIR"/sh/binfmt.sh
+ eend $?
+return 0
+}
{
[ "$RC_SYS" = VSERVER -o "$RC_SYS" = LXC ] && return 0
local dir
+ # If / is still read-only due to a problem, this will fail!
+ if ! checkpath -W /; then
+ eerror "/ is not writable; unable to clean up underlying /run"
+ return 1
+ fi
+ if ! checkpath -W /tmp; then
+ eerror "/tmp is not writable; unable to clean up underlying /run"
+ return 1
+ fi
+ # Now we know that we can modify /tmp and /
+ # if mktemp -d fails, it returns an EMPTY string
+ # STDERR: mktemp: failed to create directory via template ‘/tmp/tmp.XXXXXXXXXX’: Read-only file system
+ # STDOUT: ''
+ rc=0
dir=$(mktemp -d)
- mount --bind / $dir
- rm -rf $dir/run/*
- umount $dir
- rm -rf $dir
+ if [ -n "$dir" -a -d $dir -a -w $dir ]; then
+ mount --bind / $dir && rm -rf $dir/run/* || rc=1
+ umount $dir
+ rm -rf $dir
+ else
+ rc=1
+ fi
+ if [ $rc -ne 0 ]; then
+ eerror "Could not clean up underlying /run on /"
+ return 1
+ fi
}
start()
if yesno $log_dmesg; then
if $logw || checkpath -W /var/log; then
# Create an 'after-boot' dmesg log
- if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ -a "$RC_SYS" != LXC ]; then
- dmesg > /var/log/dmesg
- chmod 640 /var/log/dmesg
- fi
+ case "$RC_SYS" in
+ VSERVER|OPENVZ|LXC|SYSTEMD-NSPAWN) ;;
+ *)
+ dmesg > /var/log/dmesg
+ chmod 640 /var/log/dmesg
+ ;;
+ esac
fi
fi
{
need localmount termencoding
after hotplug bootmisc
- keyword -openvz -prefix -uml -vserver -xenu -lxc
+ keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
}
start()
{
provide dev-mount
before dev
- keyword -prefix -vserver -lxc
+ keyword -prefix -systemd-nspawn -vserver -lxc
}
mount_dev()
depend()
{
before dev modules
- keyword -lxc -prefix -vserver
+ keyword -lxc -prefix -systemd-nspawn -vserver
}
start()
depend()
{
use dev clock modules
- keyword -jail -openvz -prefix -timeout -vserver -lxc -uml
+ keyword -jail -openvz -prefix -systemd-nspawn -timeout -vserver -lxc -uml
}
_abort() {
description="Sets the hostname of the machine."
depend() {
- keyword -prefix -lxc
+ keyword -prefix -systemd-nspawn -lxc
}
start()
else
before *
fi
- keyword -openvz -prefix -uml -vserver -xenu -lxc
+ keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
}
setupopts()
{
need localmount termencoding
after bootmisc
- keyword -openvz -prefix -uml -vserver -xenu -lxc
+ keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
}
start()
for file in /etc/local.d/*.start; do
if [ -x "${file}" ]; then
vebegin "Executing \"${file}\""
- "${file}" $redirect
+ eval "${file}" $redirect
retval=$?
if [ ${retval} -ne 0 ]; then
has_errors=1
for file in /etc/local.d/*.stop; do
if [ -x "${file}" ]; then
vebegin "Executing \"${file}\""
- "${file}" $redirect
+ eval "${file}" $redirect
retval=$?
if [ ${retval} -ne 0 ]; then
has_errors=1
need fsck
use lvm modules mtab
after lvm modules
- keyword -jail -prefix -vserver -lxc
+ keyword -jail -prefix -systemd-nspawn -vserver -lxc
}
start()
depend()
{
- keyword -jail -prefix -vserver
+ keyword -jail -prefix -systemd-nspawn -vserver
}
start()
depend()
{
use isapnp
- keyword -openvz -prefix -vserver -lxc
+ keyword -openvz -prefix -systemd-nspawn -vserver -lxc
}
start()
depend()
{
need killprocs savecache
- keyword -openvz -prefix -vserver -lxc
+ keyword -openvz -prefix -systemd-nspawn -vserver -lxc
}
start()
config /etc/fstab
use afc-client amd nfsclient autofs openvpn
use dns
- keyword -jail -prefix -vserver -lxc
+ keyword -jail -prefix -systemd-nspawn -vserver -lxc
}
start()
depend()
{
need localmount
- keyword -openvz -prefix -vserver -lxc
+ keyword -openvz -prefix -systemd-nspawn -vserver -lxc
}
_setleds()
--- /dev/null
+#!/sbin/openrc-run
+# Copyright (c) 2014 Ralph Sennhauser <sera@igentoo.org>
+# Released under the 2-clause BSD license.
+
+# Can be used on OSs that take care of the clock.
+
+description="Provides clock"
+
+depend()
+{
+ provide clock
+}
#!/sbin/runscript
-# Copyright 1999-2014 Gentoo Foundation
+# Copyright 1999-2015 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-db/postgresql/files/postgresql.init,v 1.4 2014/12/28 18:07:22 titanofold Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-db/postgresql/files/postgresql.init-9.3,v 1.1 2015/06/04 19:34:58 titanofold Exp $
extra_started_commands="reload"
configured_port=$(get_config port)
: ${configured_port:=${PGPORT}}
-socket_path=$(get_config unix_socket_directory)
-: ${socket_path:=/run/postgresql}
+socket_paths=$(get_config unix_socket_directories)
+: ${socket_paths:=/run/postgresql}
checkconfig() {
# Check that DATA_DIR has been set
fi
done
- # Set the proper permission for the socket path and create it if
+ # Set the proper permission for the socket paths and create it if
# it doesn't exist.
- checkpath -d -m 1775 -o postgres:postgres ${socket_path}
- if [ -e ${socket_path%/}/.s.PGSQL.${configured_port} ] ; then
- eerror "Socket conflict."
- eerror "A server is already listening on:"
- eerror " ${socket_path%/}/.s.PGSQL.${configured_port}"
- eerror "HINT: Change PGPORT to listen on a different socket."
- return 1
- fi
+ set -f; IFS=','
+ local s
+ for s in ${socket_paths}; do
+ checkpath -d -m 1775 -o postgres:postgres ${s}
+ if [ -e ${s%/}/.s.PGSQL.${configured_port} ] ; then
+ eerror "Socket conflict."
+ eerror "A server is already listening on:"
+ eerror " ${s%/}/.s.PGSQL.${configured_port}"
+ eerror "HINT: Change PGPORT to listen on a different socket."
+ return 1
+ fi
+ done
+ set +f; unset IFS
}
start() {
{
use modules devfs
need localmount
- keyword -openvz -prefix -vserver -lxc
+ keyword -openvz -prefix -systemd-nspawn -vserver -lxc
}
start()
{
- # Make sure we insert usbcore if it's a module
- if [ -f /proc/modules -a ! -d /sys/module/usbcore -a ! -d /proc/bus/usb ]; then
- modprobe -q usbcore
- fi
-
- [ -e /proc/filesystems ] || return 0
-
# Setup Kernel Support for miscellaneous Binary Formats
if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
+ modprobe -q binfmt-misc
if grep -qs binfmt_misc /proc/filesystems; then
ebegin "Mounting misc binary format filesystem"
mount -t binfmt_misc -o nodev,noexec,nosuid \
binfmt_misc /proc/sys/fs/binfmt_misc
- if eend $? ; then
- local fmts
- ebegin "Loading custom binary format handlers"
- fmts=$(grep -hsv -e '^[#;]' -e '^[[:space:]]*$' \
- /run/binfmt.d/*.conf \
- /etc/binfmt.d/*.conf \
- ""/usr/lib/binfmt.d/*.conf)
- if [ -n "${fmts}" ]; then
- echo "${fmts}" > /proc/sys/fs/binfmt_misc/register
- fi
eend $?
- fi
fi
fi
-
- [ "$RC_SYS" = "OPENVZ" ] && return 0
-
- # Check what USB fs the kernel support. Currently
- # 2.5+ kernels, and later 2.4 kernels have 'usbfs',
- # while older kernels have 'usbdevfs'.
- if [ -d /proc/bus/usb -a ! -e /proc/bus/usb/devices ]; then
- local usbfs=$(grep -Fow usbfs /proc/filesystems ||
- grep -Fow usbdevfs /proc/filesystems)
- if [ -n "$usbfs" ]; then
- ebegin "Mounting USB device filesystem [$usbfs]"
- local usbgid="$(getent group usb | \
- sed -e 's/.*:.*:\(.*\):.*/\1/')"
- mount -t $usbfs \
- -o ${usbgid:+devmode=0664,devgid=$usbgid,}noexec,nosuid \
- usbfs /proc/bus/usb
- eend $?
- fi
- fi
-
- # Setup Kernel Support for SELinux
- if [ -d /sys/fs/selinux ] && ! mountinfo -q /sys/fs/selinux; then
- if grep -qs selinuxfs /proc/filesystems; then
- ebegin "Mounting SELinux filesystem"
- mount -t selinuxfs selinuxfs /sys/fs/selinux
- eend $?
- fi
- fi
-
return 0
}
depend()
{
need fsck
- keyword -jail -openvz -prefix -vserver -lxc
+ keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
}
start()
--- /dev/null
+#!/sbin/openrc-run
+# Copyright (C) 2015 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+command=/bin/s6-svscan
+command_args="${RC_SVCDIR}"/s6-scan
+command_background=yes
+pidfile=/var/run/s6-svscan.pid
+
+depend()
+{
+ need localmount
+}
+
+start_pre()
+{
+ einfo "Creating s6 scan directory"
+ checkpath -d -m 0755 "$RC_SVCDIR"/s6-scan
+ return $?
+}
+
+stop_post()
+{
+ ebegin "Stopping any remaining s6 services"
+ s6-svc -dx "${RC_SVCDIR}"/s6-scan/* 2>/dev/null || true
+ eend $?
+
+ ebegin "Stopping any remaining s6 service loggers"
+ s6-svc -dx "${RC_SVCDIR}"/s6-scan/*/log 2>/dev/null || true
+ eend $?
+}
return 1
fi
fi
- if ! checkpath -W "$RC_LIBEXECDIR"/cache; then
- ewarn "WARNING: ${RC_LIBEXECDIR}/cache is not writable!"
+ if ! checkpath -W "$RC_LIBEXECDIR"; then
+ ewarn "WARNING: ${RC_LIBEXECDIR} is not writable!"
if ! yesno "${RC_GOINGDOWN}"; then
ewarn "Unable to save deptree cache"
return 1
local rc=
if [ ! -d "$RC_LIBEXECDIR"/cache ]; then
rm -rf "$RC_LIBEXECDIR"/cache
- if ! mkdir "$RC_LIBEXECDIR"/cache; then
+ if ! mkdir -p "$RC_LIBEXECDIR"/cache; then
rc=$?
if yesno "${RC_GOINGDOWN}"; then
rc=0
fi
- eend $rc
+ eend $rc "Unable to create $RC_SVCDIR/cache"
return $rc
fi
fi
#!/sbin/runscript
-# Copyright 1999-2012 Gentoo Foundation
+# Copyright 1999-2015 Gentoo Foundation
# Distributed under the terms of the GNU General Public License, v2 or later
-# $Header: /var/cvsroot/gentoo-x86/dev-vcs/subversion/files/svnserve.initd2,v 1.2 2012/01/14 19:46:34 tommy Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-vcs/subversion/files/svnserve.initd3,v 1.1 2015/04/09 12:58:45 polynomial-c Exp $
+
+description="svn server"
+pidfile="/var/run/svnserve.pid"
+command="/usr/bin/svnserve"
+command_args="--foreground --daemon ${SVNSERVE_OPTS:---root=/var/svn}"
+command_background="true"
+start_stop_daemon_args="-u ${SVNSERVE_USER:-apache} -g ${SVNSERVE_GROUP:-apache}"
depend() {
need net
}
-start() {
- ebegin "Starting svnserve"
+start_pre() {
# Ensure that we run from a readable working dir, and that we do not
# lock filesystems when being run from such a location.
cd /
- start-stop-daemon --start --quiet --background --make-pidfile \
- --pidfile /var/run/svnserve.pid --exec /usr/bin/svnserve \
- --user ${SVNSERVE_USER:-apache} --group ${SVNSERVE_GROUP:-apache} -- \
- --foreground --daemon ${SVNSERVE_OPTS:---root=/var/svn}
- eend $?
-}
-
-stop() {
- ebegin "Stopping svnserve"
- start-stop-daemon --stop --quiet --pidfile /var/run/svnserve.pid
- eend $?
}
depend()
{
before localmount
- keyword -jail -openvz -prefix -vserver -lxc
+ keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
}
start()
depend()
{
need localmount
- keyword -jail -openvz -prefix -vserver -lxc
+ keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
}
start()
{
before *
provide clock
- keyword -openvz -prefix -uml -vserver -xenu -lxc
+ keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
}
# swclock is an OpenRC built in
depend()
{
before bootmisc logger
- keyword -prefix -vserver
+ keyword -prefix -systemd-nspawn -vserver
}
start()
{
+ local quiet
+ yesno $rc_verbose || quiet=-q
+
ebegin "Configuring kernel parameters"
- sysctl --system
+ sysctl ${quiet} --system
eend $? "Unable to configure some kernel parameters"
}
depend()
{
- keyword -lxc -prefix -vserver
+ keyword -lxc -prefix -systemd-nspawn -vserver
}
mount_sys()
fi
fi
+ # Setup Kernel Support for SELinux
+ if [ -d /sys/fs/selinux ] && ! mountinfo -q /sys/fs/selinux; then
+ if grep -qs selinuxfs /proc/filesystems; then
+ ebegin "Mounting SELinux filesystem"
+ mount -t selinuxfs selinuxfs /sys/fs/selinux
+ eend $?
+ fi
+ fi
+
# setup up kernel support for efivarfs
# slightly complicated, as if it's build as a module but NOT yet loaded,
# it will NOT appear in /proc/filesystems yet
depend()
{
- keyword -lxc -openvz -prefix -uml -vserver -xenu
+ keyword -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
use root
after bootmisc
}
# Copyright 1999-2012 Gentoo Foundation
# Released under the 2-clause BSD license.
-description="set up tmpfiles.d entries"
+description="Set up tmpfiles.d entries"
depend()
{
start()
{
- ebegin "setting up tmpfiles.d entries for /dev"
+ ebegin "Setting up tmpfiles.d entries for /dev"
/lib64/rc/sh/tmpfiles.sh --prefix=/dev --create --boot ${tmpfiles_opts}
eend $?
return 0
# Copyright 1999-2012 Gentoo Foundation
# Released under the 2-clause BSD license.
-description="set up tmpfiles.d entries"
+description="Set up tmpfiles.d entries"
depend()
{
start()
{
- ebegin "setting up tmpfiles.d entries"
+ ebegin "Setting up tmpfiles.d entries"
/lib64/rc/sh/tmpfiles.sh --exclude-prefix=/dev --create --remove --boot \
${tmpfiles_opts}
eend $?
#!/sbin/runscript
-# Copyright 1999-2014 Gentoo Foundation
+# Copyright 1999-2015 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-admin/ulogd/files/ulogd-2-ng.init,v 1.2 2014/08/22 10:31:59 dlan Exp $
+# $Header: /var/cvsroot/gentoo-x86/app-admin/ulogd/files/ulogd.init,v 1.1 2015/05/30 09:38:29 idella4 Exp $
-ULOGD_PIDFILE="/run/ulogd.pid"
-ULOGD_BINARY="/usr/sbin/ulogd"
-ULOGD_OPTS="--daemon --uid ulogd --pidfile ${ULOGD_PIDFILE}"
+extra_started_commands="reload reopen"
-extra_started_commands="reload reopen_logs"
+: ${ULOGD_BINARY:=/usr/sbin/ulogd}
+: ${ULOGD_PIDFILE:=/run/${SVCNAME}.pid}
+: ${ULOGD_OPTS:=--daemon --uid ulogd --pidfile ${ULOGD_PIDFILE}}
depend() {
before iptables ip6tables ebtables firewall
eend $?
}
-reopen_logs() {
+reopen() {
ebegin "Reopening ${SVCNAME} logfiles"
start-stop-daemon --signal HUP --pidfile ${ULOGD_PIDFILE}
eend $?
depend()
{
need localmount
- keyword -jail -lxc -openvz -prefix
+ keyword -jail -lxc -openvz -prefix -systemd-nspawn
}
save_seed()
-/usr/lib/jvm/icedtea-bin-6
\ No newline at end of file
+//usr/lib/jvm/icedtea-bin-7
\ No newline at end of file
/var/log/clamav/clamd.log {
+ #su clamav clamav
+ rotate 5
missingok
+ size +1024m
+ compress
+ delaycompress
postrotate
/etc/init.d/clamd logfix
/bin/kill -HUP `cat /var/run/clamav/clamd.pid 2> /dev/null` 2>/dev/null || true
}
/var/log/clamav/freshclam.log {
+ #su clamav clamav
+ rotate 5
missingok
+ size +1024m
+ compress
+ delaycompress
postrotate
/etc/init.d/clamd logfix
/bin/kill -HUP `cat /var/run/clamav/freshclam.pid 2> /dev/null` 2>/dev/null || true
olddir /var/log/ulogd/%Y-%m
size 4M
sharedscripts
+ missingok
+ notifempty
+ create 0640 ulogd
postrotate
- /etc/init.d/ulogd reopen_logs > /dev/null
+ [ -f /run/ulogd.pid ] && /bin/kill -HUP $(cat /run/ulogd.pid)
endscript
}
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it is
+; much more verbose when it comes to errors. We recommend using the
+; development version only in development environments, as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+; This is php.ini-development INI file.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: On
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It is
+; generally recommended that <?php and ?> should be used and that this feature
+; should be disabled, as enabling it may result in issues when generating XML
+; documents, however this remains supported for backward compatibility reasons.
+; Note that this directive does not control the <?= shorthand tag, which can be
+; used regardless of this directive.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+; If enabled, scripts may be written in encodings that are incompatible with
+; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
+; encodings. To use this feature, mbstring extension must be enabled.
+; Default: Off
+;zend.multibyte = Off
+
+; Allows to set the default encoding for the scripts. This value will be used
+; unless "declare(encoding=...)" directive appears at the top of the script.
+; Only affects if zend.multibyte is set.
+; Default: ""
+;zend.script_encoding =
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it is automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL (Show all errors, warnings and notices including coding standards.)
+; E_ALL & ~E_NOTICE (Show all errors, except for notices)
+; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+; http://php.net/error-reporting
+error_reporting = E_ALL
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; For production environments, we recommend logging errors rather than
+; sending them to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. We strongly recommend you
+; set this to 'off' for production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of formatting the
+; error message as HTML for easier reading. This directive controls whether
+; the error message is formatted as HTML or not.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: On
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set to On *and* docref_root is not empty, then PHP
+; produces clickable error messages that direct to a page describing the error
+; or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty, in which
+; case no links to documentation are generated.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on Windows).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. G,P,C,E & S are abbreviations for the following respective super
+; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
+; paid for the registration of these arrays and because ENV is not as commonly
+; used as the others, ENV is not recommended on productions servers. You
+; can still get access to the environment variables through getenv() should you
+; need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P & C) should be
+; registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive
+; are specified in the same manner as the variables_order directive,
+; EXCEPT one. Leaving this value empty will cause PHP to use the value set
+; in the variables_order directive. It does not mean it will leave the super
+; globals array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the ENV, REQUEST and SERVER variables are created when they're
+; first used (Just In Time) instead of when the script starts. If these
+; variables are not used within a script, having this directive on will result
+; in a performance gain. The PHP directive register_argc_argv must be disabled
+; for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Whether PHP will read the POST data.
+; This option is enabled by default.
+; Most likely, you won't want to disable this option globally. It causes $_POST
+; and $_FILES to always be empty; the only way you will be able to read the
+; POST data will be through the php://input stream wrapper. This can be useful
+; to proxy requests or to process the POST data in a memory efficient fashion.
+; http://php.net/enable-post-data-reading
+;enable_post_data_reading = Off
+
+; Maximum size of POST data that PHP will accept.
+; Its value may be 0 to disable the limit. It is ignored if POST data reading
+; is disabled through enable_post_data_reading.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to UTF-8.
+; http://php.net/default-charset
+default_charset = "UTF-8"
+
+; PHP internal character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/internal-encoding
+;internal_encoding =
+
+; PHP input character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/input-encoding
+;input_encoding =
+
+; PHP output character encoding is set to empty.
+; If empty, default_charset is used.
+; mbstring or iconv output handler is used.
+; See also output_buffer.
+; http://php.net/output-encoding
+;output_encoding =
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature and it will be removed in a future version.
+; If post reading is disabled through enable_post_data_reading,
+; $HTTP_RAW_POST_DATA is *NOT* populated.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = -1
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Directory where the temporary files should be placed.
+; Defaults to the system default (see sys_get_temp_dir)
+; sys_temp_dir = "/tmp"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env =
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If set to 0, PHP sends Status: header that
+; is supported by Apache. When this option is set to 1, PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8_12c.dll ; Use with Oracle Database 12c Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[CLI Server]
+; Whether the CLI web server uses ANSI color coding in its terminal output.
+cli_server.color = On
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; If empty, default_charset or input_encoding or iconv.input_encoding is used.
+; The precedence is: default_charset < intput_encoding < iconv.input_encoding
+;iconv.input_encoding =
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;iconv.internal_encoding =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; If empty, default_charset or output_encoding or iconv.output_encoding is used.
+; The precedence is: default_charset < output_encoding < iconv.output_encoding
+; To use an output encoding conversion, iconv's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+;iconv.output_encoding =
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail().
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+; Log mail to syslog (Event Log on Windows).
+;mail.log = syslog
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if
+; your OS has problems with many files in one directory, and is
+; a more efficient layout for servers that handle many sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use strict session mode.
+; Strict session mode does not accept uninitialized session ID and regenerate
+; session ID if browser sends uninitialized session ID. Strict mode protects
+; applications from session fixation via session adoption vulnerability. It is
+; disabled by default for maximum compatibility, but enabling it is encouraged.
+; https://wiki.php.net/rfc/strict_sessions
+session.use_strict_mode = 0
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the be-all and end-all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 -type f | xargs rm
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+;session.entropy_length = 32
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; Defaults to /dev/urandom
+; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
+; If neither are found at compile time, the default is no entropy file.
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users' security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; Enable upload progress tracking in $_SESSION
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.enabled
+;session.upload_progress.enabled = On
+
+; Cleanup the progress information as soon as all POST data has been read
+; (i.e. upload completed).
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.cleanup
+;session.upload_progress.cleanup = On
+
+; A prefix used for the upload progress key in $_SESSION
+; Default Value: "upload_progress_"
+; Development Value: "upload_progress_"
+; Production Value: "upload_progress_"
+; http://php.net/session.upload-progress.prefix
+;session.upload_progress.prefix = "upload_progress_"
+
+; The index name (concatenated with the prefix) in $_SESSION
+; containing the upload progress information
+; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; http://php.net/session.upload-progress.name
+;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
+
+; How frequently the upload progress should be updated.
+; Given either in percentages (per-file), or in bytes
+; Default Value: "1%"
+; Development Value: "1%"
+; Production Value: "1%"
+; http://php.net/session.upload-progress.freq
+;session.upload_progress.freq = "1%"
+
+; The minimum delay between updates, in seconds
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.upload-progress.min-freq
+;session.upload_progress.min_freq = "1"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatibility_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; This affects mb_send_mail() and mbstrig.detect_order.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; internal/script encoding.
+; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;mbstring.internal_encoding =
+
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; http input encoding.
+; mbstring.encoding_traslation = On is needed to use this setting.
+; If empty, default_charset or input_encoding or mbstring.input is used.
+; The precedence is: default_charset < intput_encoding < mbsting.http_input
+; http://php.net/mbstring.http-input
+;mbstring.http_input =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; http output encoding.
+; mb_output_handler must be registered as output buffer to function.
+; If empty, default_charset or output_encoding or mbstring.http_output is used.
+; The precedence is: default_charset < output_encoding < mbstring.http_output
+; To use an output encoding conversion, mbstring's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+; http://php.net/mbstring.http-output
+;mbstring.http_output =
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; "auto" detect order is changed according to mbstring.language
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+; Default: Off
+;mbstring.strict_detection = On
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[opcache]
+; Determines if Zend OPCache is enabled
+;opcache.enable=0
+
+; Determines if Zend OPCache is enabled for the CLI version of PHP
+;opcache.enable_cli=0
+
+; The OPcache shared memory storage size.
+;opcache.memory_consumption=64
+
+; The amount of memory for interned strings in Mbytes.
+;opcache.interned_strings_buffer=4
+
+; The maximum number of keys (scripts) in the OPcache hash table.
+; Only numbers between 200 and 100000 are allowed.
+;opcache.max_accelerated_files=2000
+
+; The maximum percentage of "wasted" memory until a restart is scheduled.
+;opcache.max_wasted_percentage=5
+
+; When this directive is enabled, the OPcache appends the current working
+; directory to the script key, thus eliminating possible collisions between
+; files with the same name (basename). Disabling the directive improves
+; performance, but may break existing applications.
+;opcache.use_cwd=1
+
+; When disabled, you must reset the OPcache manually or restart the
+; webserver for changes to the filesystem to take effect.
+;opcache.validate_timestamps=1
+
+; How often (in seconds) to check file timestamps for changes to the shared
+; memory storage allocation. ("1" means validate once per second, but only
+; once per request. "0" means always validate)
+;opcache.revalidate_freq=2
+
+; Enables or disables file search in include_path optimization
+;opcache.revalidate_path=0
+
+; If disabled, all PHPDoc comments are dropped from the code to reduce the
+; size of the optimized code.
+;opcache.save_comments=1
+
+; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
+; may be always stored (save_comments=1), but not loaded by applications
+; that don't need them anyway.
+;opcache.load_comments=1
+
+; If enabled, a fast shutdown sequence is used for the accelerated code
+;opcache.fast_shutdown=0
+
+; Allow file existence override (file_exists, etc.) performance feature.
+;opcache.enable_file_override=0
+
+; A bitmask, where each bit enables or disables the appropriate OPcache
+; passes
+;opcache.optimization_level=0xffffffff
+
+;opcache.inherited_hack=1
+;opcache.dups_fix=0
+
+; The location of the OPcache blacklist file (wildcards allowed).
+; Each OPcache blacklist file is a text file that holds the names of files
+; that should not be accelerated. The file format is to add each filename
+; to a new line. The filename may be a full path or just a file prefix
+; (i.e., /var/www/x blacklists all the files and directories in /var/www
+; that start with 'x'). Line starting with a ; are ignored (comments).
+;opcache.blacklist_filename=
+
+; Allows exclusion of large files from being cached. By default all files
+; are cached.
+;opcache.max_file_size=0
+
+; Check the cache checksum each N requests.
+; The default value of "0" means that the checks are disabled.
+;opcache.consistency_checks=0
+
+; How long to wait (in seconds) for a scheduled restart to begin if the cache
+; is not being accessed.
+;opcache.force_restart_timeout=180
+
+; OPcache error_log file name. Empty string assumes "stderr".
+;opcache.error_log=
+
+; All OPcache errors go to the Web server log.
+; By default, only fatal errors (level 0) or errors (level 1) are logged.
+; You can also enable warnings (level 2), info messages (level 3) or
+; debug messages (level 4).
+;opcache.log_verbosity_level=1
+
+; Preferred Shared Memory back-end. Leave empty and let the system decide.
+;opcache.preferred_memory_model=
+
+; Protect the shared memory from unexpected writing during script execution.
+; Useful for internal debugging only.
+;opcache.protect_memory=0
+
+[curl]
+; A default value for the CURLOPT_CAINFO option. This is required to be an
+; absolute path.
+;curl.cainfo =
+
+[openssl]
+; The location of a Certificate Authority (CA) file on the local filesystem
+; to use when verifying the identity of SSL/TLS peers. Most users should
+; not specify a value for this directive as PHP will attempt to use the
+; OS-managed cert stores in its absence. If specified, this value may still
+; be overridden on a per-stream basis via the "cafile" SSL stream context
+; option.
+;openssl.cafile=
+
+; If openssl.cafile is not specified or if the CA file is not found, the
+; directory pointed to by openssl.capath is searched for a suitable
+; certificate. This value must be a correctly hashed certificate directory.
+; Most users should not specify a value for this directive as PHP will
+; attempt to use the OS-managed cert stores in its absence. If specified,
+; this value may still be overridden on a per-stream basis via the "capath"
+; SSL stream context option.
+;openssl.capath=
+
+; Local Variables:
+; tab-width: 4
+; End:
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it is
+; much more verbose when it comes to errors. We recommend using the
+; development version only in development environments, as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+; This is php.ini-development INI file.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: On
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It is
+; generally recommended that <?php and ?> should be used and that this feature
+; should be disabled, as enabling it may result in issues when generating XML
+; documents, however this remains supported for backward compatibility reasons.
+; Note that this directive does not control the <?= shorthand tag, which can be
+; used regardless of this directive.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+; If enabled, scripts may be written in encodings that are incompatible with
+; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
+; encodings. To use this feature, mbstring extension must be enabled.
+; Default: Off
+;zend.multibyte = Off
+
+; Allows to set the default encoding for the scripts. This value will be used
+; unless "declare(encoding=...)" directive appears at the top of the script.
+; Only affects if zend.multibyte is set.
+; Default: ""
+;zend.script_encoding =
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it is automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL (Show all errors, warnings and notices including coding standards.)
+; E_ALL & ~E_NOTICE (Show all errors, except for notices)
+; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+; http://php.net/error-reporting
+error_reporting = E_ALL
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; For production environments, we recommend logging errors rather than
+; sending them to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. We strongly recommend you
+; set this to 'off' for production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of formatting the
+; error message as HTML for easier reading. This directive controls whether
+; the error message is formatted as HTML or not.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: On
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set to On *and* docref_root is not empty, then PHP
+; produces clickable error messages that direct to a page describing the error
+; or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty, in which
+; case no links to documentation are generated.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on Windows).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. G,P,C,E & S are abbreviations for the following respective super
+; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
+; paid for the registration of these arrays and because ENV is not as commonly
+; used as the others, ENV is not recommended on productions servers. You
+; can still get access to the environment variables through getenv() should you
+; need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P & C) should be
+; registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive
+; are specified in the same manner as the variables_order directive,
+; EXCEPT one. Leaving this value empty will cause PHP to use the value set
+; in the variables_order directive. It does not mean it will leave the super
+; globals array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the ENV, REQUEST and SERVER variables are created when they're
+; first used (Just In Time) instead of when the script starts. If these
+; variables are not used within a script, having this directive on will result
+; in a performance gain. The PHP directive register_argc_argv must be disabled
+; for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Whether PHP will read the POST data.
+; This option is enabled by default.
+; Most likely, you won't want to disable this option globally. It causes $_POST
+; and $_FILES to always be empty; the only way you will be able to read the
+; POST data will be through the php://input stream wrapper. This can be useful
+; to proxy requests or to process the POST data in a memory efficient fashion.
+; http://php.net/enable-post-data-reading
+;enable_post_data_reading = Off
+
+; Maximum size of POST data that PHP will accept.
+; Its value may be 0 to disable the limit. It is ignored if POST data reading
+; is disabled through enable_post_data_reading.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to UTF-8.
+; http://php.net/default-charset
+default_charset = "UTF-8"
+
+; PHP internal character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/internal-encoding
+;internal_encoding =
+
+; PHP input character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/input-encoding
+;input_encoding =
+
+; PHP output character encoding is set to empty.
+; If empty, default_charset is used.
+; mbstring or iconv output handler is used.
+; See also output_buffer.
+; http://php.net/output-encoding
+;output_encoding =
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature and it will be removed in a future version.
+; If post reading is disabled through enable_post_data_reading,
+; $HTTP_RAW_POST_DATA is *NOT* populated.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = -1
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Directory where the temporary files should be placed.
+; Defaults to the system default (see sys_get_temp_dir)
+; sys_temp_dir = "/tmp"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env =
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If set to 0, PHP sends Status: header that
+; is supported by Apache. When this option is set to 1, PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8_12c.dll ; Use with Oracle Database 12c Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[CLI Server]
+; Whether the CLI web server uses ANSI color coding in its terminal output.
+cli_server.color = On
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; If empty, default_charset or input_encoding or iconv.input_encoding is used.
+; The precedence is: default_charset < intput_encoding < iconv.input_encoding
+;iconv.input_encoding =
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;iconv.internal_encoding =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; If empty, default_charset or output_encoding or iconv.output_encoding is used.
+; The precedence is: default_charset < output_encoding < iconv.output_encoding
+; To use an output encoding conversion, iconv's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+;iconv.output_encoding =
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail().
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+; Log mail to syslog (Event Log on Windows).
+;mail.log = syslog
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if
+; your OS has problems with many files in one directory, and is
+; a more efficient layout for servers that handle many sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use strict session mode.
+; Strict session mode does not accept uninitialized session ID and regenerate
+; session ID if browser sends uninitialized session ID. Strict mode protects
+; applications from session fixation via session adoption vulnerability. It is
+; disabled by default for maximum compatibility, but enabling it is encouraged.
+; https://wiki.php.net/rfc/strict_sessions
+session.use_strict_mode = 0
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the be-all and end-all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 -type f | xargs rm
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+;session.entropy_length = 32
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; Defaults to /dev/urandom
+; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
+; If neither are found at compile time, the default is no entropy file.
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users' security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; Enable upload progress tracking in $_SESSION
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.enabled
+;session.upload_progress.enabled = On
+
+; Cleanup the progress information as soon as all POST data has been read
+; (i.e. upload completed).
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.cleanup
+;session.upload_progress.cleanup = On
+
+; A prefix used for the upload progress key in $_SESSION
+; Default Value: "upload_progress_"
+; Development Value: "upload_progress_"
+; Production Value: "upload_progress_"
+; http://php.net/session.upload-progress.prefix
+;session.upload_progress.prefix = "upload_progress_"
+
+; The index name (concatenated with the prefix) in $_SESSION
+; containing the upload progress information
+; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; http://php.net/session.upload-progress.name
+;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
+
+; How frequently the upload progress should be updated.
+; Given either in percentages (per-file), or in bytes
+; Default Value: "1%"
+; Development Value: "1%"
+; Production Value: "1%"
+; http://php.net/session.upload-progress.freq
+;session.upload_progress.freq = "1%"
+
+; The minimum delay between updates, in seconds
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.upload-progress.min-freq
+;session.upload_progress.min_freq = "1"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatibility_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; This affects mb_send_mail() and mbstrig.detect_order.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; internal/script encoding.
+; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;mbstring.internal_encoding =
+
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; http input encoding.
+; mbstring.encoding_traslation = On is needed to use this setting.
+; If empty, default_charset or input_encoding or mbstring.input is used.
+; The precedence is: default_charset < intput_encoding < mbsting.http_input
+; http://php.net/mbstring.http-input
+;mbstring.http_input =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; http output encoding.
+; mb_output_handler must be registered as output buffer to function.
+; If empty, default_charset or output_encoding or mbstring.http_output is used.
+; The precedence is: default_charset < output_encoding < mbstring.http_output
+; To use an output encoding conversion, mbstring's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+; http://php.net/mbstring.http-output
+;mbstring.http_output =
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; "auto" detect order is changed according to mbstring.language
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+; Default: Off
+;mbstring.strict_detection = On
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[opcache]
+; Determines if Zend OPCache is enabled
+;opcache.enable=0
+
+; Determines if Zend OPCache is enabled for the CLI version of PHP
+;opcache.enable_cli=0
+
+; The OPcache shared memory storage size.
+;opcache.memory_consumption=64
+
+; The amount of memory for interned strings in Mbytes.
+;opcache.interned_strings_buffer=4
+
+; The maximum number of keys (scripts) in the OPcache hash table.
+; Only numbers between 200 and 100000 are allowed.
+;opcache.max_accelerated_files=2000
+
+; The maximum percentage of "wasted" memory until a restart is scheduled.
+;opcache.max_wasted_percentage=5
+
+; When this directive is enabled, the OPcache appends the current working
+; directory to the script key, thus eliminating possible collisions between
+; files with the same name (basename). Disabling the directive improves
+; performance, but may break existing applications.
+;opcache.use_cwd=1
+
+; When disabled, you must reset the OPcache manually or restart the
+; webserver for changes to the filesystem to take effect.
+;opcache.validate_timestamps=1
+
+; How often (in seconds) to check file timestamps for changes to the shared
+; memory storage allocation. ("1" means validate once per second, but only
+; once per request. "0" means always validate)
+;opcache.revalidate_freq=2
+
+; Enables or disables file search in include_path optimization
+;opcache.revalidate_path=0
+
+; If disabled, all PHPDoc comments are dropped from the code to reduce the
+; size of the optimized code.
+;opcache.save_comments=1
+
+; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
+; may be always stored (save_comments=1), but not loaded by applications
+; that don't need them anyway.
+;opcache.load_comments=1
+
+; If enabled, a fast shutdown sequence is used for the accelerated code
+;opcache.fast_shutdown=0
+
+; Allow file existence override (file_exists, etc.) performance feature.
+;opcache.enable_file_override=0
+
+; A bitmask, where each bit enables or disables the appropriate OPcache
+; passes
+;opcache.optimization_level=0xffffffff
+
+;opcache.inherited_hack=1
+;opcache.dups_fix=0
+
+; The location of the OPcache blacklist file (wildcards allowed).
+; Each OPcache blacklist file is a text file that holds the names of files
+; that should not be accelerated. The file format is to add each filename
+; to a new line. The filename may be a full path or just a file prefix
+; (i.e., /var/www/x blacklists all the files and directories in /var/www
+; that start with 'x'). Line starting with a ; are ignored (comments).
+;opcache.blacklist_filename=
+
+; Allows exclusion of large files from being cached. By default all files
+; are cached.
+;opcache.max_file_size=0
+
+; Check the cache checksum each N requests.
+; The default value of "0" means that the checks are disabled.
+;opcache.consistency_checks=0
+
+; How long to wait (in seconds) for a scheduled restart to begin if the cache
+; is not being accessed.
+;opcache.force_restart_timeout=180
+
+; OPcache error_log file name. Empty string assumes "stderr".
+;opcache.error_log=
+
+; All OPcache errors go to the Web server log.
+; By default, only fatal errors (level 0) or errors (level 1) are logged.
+; You can also enable warnings (level 2), info messages (level 3) or
+; debug messages (level 4).
+;opcache.log_verbosity_level=1
+
+; Preferred Shared Memory back-end. Leave empty and let the system decide.
+;opcache.preferred_memory_model=
+
+; Protect the shared memory from unexpected writing during script execution.
+; Useful for internal debugging only.
+;opcache.protect_memory=0
+
+[curl]
+; A default value for the CURLOPT_CAINFO option. This is required to be an
+; absolute path.
+;curl.cainfo =
+
+[openssl]
+; The location of a Certificate Authority (CA) file on the local filesystem
+; to use when verifying the identity of SSL/TLS peers. Most users should
+; not specify a value for this directive as PHP will attempt to use the
+; OS-managed cert stores in its absence. If specified, this value may still
+; be overridden on a per-stream basis via the "cafile" SSL stream context
+; option.
+;openssl.cafile=
+
+; If openssl.cafile is not specified or if the CA file is not found, the
+; directory pointed to by openssl.capath is searched for a suitable
+; certificate. This value must be a correctly hashed certificate directory.
+; Most users should not specify a value for this directive as PHP will
+; attempt to use the OS-managed cert stores in its absence. If specified,
+; this value may still be overridden on a per-stream basis via the "capath"
+; SSL stream context option.
+;openssl.capath=
+
+; Local Variables:
+; tab-width: 4
+; End:
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it is
+; much more verbose when it comes to errors. We recommend using the
+; development version only in development environments, as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+; This is php.ini-development INI file.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: On
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It is
+; generally recommended that <?php and ?> should be used and that this feature
+; should be disabled, as enabling it may result in issues when generating XML
+; documents, however this remains supported for backward compatibility reasons.
+; Note that this directive does not control the <?= shorthand tag, which can be
+; used regardless of this directive.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+; If enabled, scripts may be written in encodings that are incompatible with
+; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
+; encodings. To use this feature, mbstring extension must be enabled.
+; Default: Off
+;zend.multibyte = Off
+
+; Allows to set the default encoding for the scripts. This value will be used
+; unless "declare(encoding=...)" directive appears at the top of the script.
+; Only affects if zend.multibyte is set.
+; Default: ""
+;zend.script_encoding =
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it is automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL (Show all errors, warnings and notices including coding standards.)
+; E_ALL & ~E_NOTICE (Show all errors, except for notices)
+; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+; http://php.net/error-reporting
+error_reporting = E_ALL
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; For production environments, we recommend logging errors rather than
+; sending them to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. We strongly recommend you
+; set this to 'off' for production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of formatting the
+; error message as HTML for easier reading. This directive controls whether
+; the error message is formatted as HTML or not.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: On
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set to On *and* docref_root is not empty, then PHP
+; produces clickable error messages that direct to a page describing the error
+; or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty, in which
+; case no links to documentation are generated.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on Windows).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. G,P,C,E & S are abbreviations for the following respective super
+; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
+; paid for the registration of these arrays and because ENV is not as commonly
+; used as the others, ENV is not recommended on productions servers. You
+; can still get access to the environment variables through getenv() should you
+; need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P & C) should be
+; registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive
+; are specified in the same manner as the variables_order directive,
+; EXCEPT one. Leaving this value empty will cause PHP to use the value set
+; in the variables_order directive. It does not mean it will leave the super
+; globals array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the ENV, REQUEST and SERVER variables are created when they're
+; first used (Just In Time) instead of when the script starts. If these
+; variables are not used within a script, having this directive on will result
+; in a performance gain. The PHP directive register_argc_argv must be disabled
+; for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Whether PHP will read the POST data.
+; This option is enabled by default.
+; Most likely, you won't want to disable this option globally. It causes $_POST
+; and $_FILES to always be empty; the only way you will be able to read the
+; POST data will be through the php://input stream wrapper. This can be useful
+; to proxy requests or to process the POST data in a memory efficient fashion.
+; http://php.net/enable-post-data-reading
+;enable_post_data_reading = Off
+
+; Maximum size of POST data that PHP will accept.
+; Its value may be 0 to disable the limit. It is ignored if POST data reading
+; is disabled through enable_post_data_reading.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to UTF-8.
+; http://php.net/default-charset
+default_charset = "UTF-8"
+
+; PHP internal character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/internal-encoding
+;internal_encoding =
+
+; PHP input character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/input-encoding
+;input_encoding =
+
+; PHP output character encoding is set to empty.
+; If empty, default_charset is used.
+; mbstring or iconv output handler is used.
+; See also output_buffer.
+; http://php.net/output-encoding
+;output_encoding =
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature and it will be removed in a future version.
+; If post reading is disabled through enable_post_data_reading,
+; $HTTP_RAW_POST_DATA is *NOT* populated.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = -1
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Directory where the temporary files should be placed.
+; Defaults to the system default (see sys_get_temp_dir)
+; sys_temp_dir = "/tmp"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env =
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If set to 0, PHP sends Status: header that
+; is supported by Apache. When this option is set to 1, PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8_12c.dll ; Use with Oracle Database 12c Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[CLI Server]
+; Whether the CLI web server uses ANSI color coding in its terminal output.
+cli_server.color = On
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; If empty, default_charset or input_encoding or iconv.input_encoding is used.
+; The precedence is: default_charset < intput_encoding < iconv.input_encoding
+;iconv.input_encoding =
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;iconv.internal_encoding =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; If empty, default_charset or output_encoding or iconv.output_encoding is used.
+; The precedence is: default_charset < output_encoding < iconv.output_encoding
+; To use an output encoding conversion, iconv's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+;iconv.output_encoding =
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail().
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+; Log mail to syslog (Event Log on Windows).
+;mail.log = syslog
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if
+; your OS has problems with many files in one directory, and is
+; a more efficient layout for servers that handle many sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use strict session mode.
+; Strict session mode does not accept uninitialized session ID and regenerate
+; session ID if browser sends uninitialized session ID. Strict mode protects
+; applications from session fixation via session adoption vulnerability. It is
+; disabled by default for maximum compatibility, but enabling it is encouraged.
+; https://wiki.php.net/rfc/strict_sessions
+session.use_strict_mode = 0
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the be-all and end-all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 -type f | xargs rm
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+;session.entropy_length = 32
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; Defaults to /dev/urandom
+; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
+; If neither are found at compile time, the default is no entropy file.
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users' security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; Enable upload progress tracking in $_SESSION
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.enabled
+;session.upload_progress.enabled = On
+
+; Cleanup the progress information as soon as all POST data has been read
+; (i.e. upload completed).
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.cleanup
+;session.upload_progress.cleanup = On
+
+; A prefix used for the upload progress key in $_SESSION
+; Default Value: "upload_progress_"
+; Development Value: "upload_progress_"
+; Production Value: "upload_progress_"
+; http://php.net/session.upload-progress.prefix
+;session.upload_progress.prefix = "upload_progress_"
+
+; The index name (concatenated with the prefix) in $_SESSION
+; containing the upload progress information
+; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; http://php.net/session.upload-progress.name
+;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
+
+; How frequently the upload progress should be updated.
+; Given either in percentages (per-file), or in bytes
+; Default Value: "1%"
+; Development Value: "1%"
+; Production Value: "1%"
+; http://php.net/session.upload-progress.freq
+;session.upload_progress.freq = "1%"
+
+; The minimum delay between updates, in seconds
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.upload-progress.min-freq
+;session.upload_progress.min_freq = "1"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatibility_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; This affects mb_send_mail() and mbstrig.detect_order.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; internal/script encoding.
+; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;mbstring.internal_encoding =
+
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; http input encoding.
+; mbstring.encoding_traslation = On is needed to use this setting.
+; If empty, default_charset or input_encoding or mbstring.input is used.
+; The precedence is: default_charset < intput_encoding < mbsting.http_input
+; http://php.net/mbstring.http-input
+;mbstring.http_input =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; http output encoding.
+; mb_output_handler must be registered as output buffer to function.
+; If empty, default_charset or output_encoding or mbstring.http_output is used.
+; The precedence is: default_charset < output_encoding < mbstring.http_output
+; To use an output encoding conversion, mbstring's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+; http://php.net/mbstring.http-output
+;mbstring.http_output =
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; "auto" detect order is changed according to mbstring.language
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+; Default: Off
+;mbstring.strict_detection = On
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[opcache]
+; Determines if Zend OPCache is enabled
+;opcache.enable=0
+
+; Determines if Zend OPCache is enabled for the CLI version of PHP
+;opcache.enable_cli=0
+
+; The OPcache shared memory storage size.
+;opcache.memory_consumption=64
+
+; The amount of memory for interned strings in Mbytes.
+;opcache.interned_strings_buffer=4
+
+; The maximum number of keys (scripts) in the OPcache hash table.
+; Only numbers between 200 and 100000 are allowed.
+;opcache.max_accelerated_files=2000
+
+; The maximum percentage of "wasted" memory until a restart is scheduled.
+;opcache.max_wasted_percentage=5
+
+; When this directive is enabled, the OPcache appends the current working
+; directory to the script key, thus eliminating possible collisions between
+; files with the same name (basename). Disabling the directive improves
+; performance, but may break existing applications.
+;opcache.use_cwd=1
+
+; When disabled, you must reset the OPcache manually or restart the
+; webserver for changes to the filesystem to take effect.
+;opcache.validate_timestamps=1
+
+; How often (in seconds) to check file timestamps for changes to the shared
+; memory storage allocation. ("1" means validate once per second, but only
+; once per request. "0" means always validate)
+;opcache.revalidate_freq=2
+
+; Enables or disables file search in include_path optimization
+;opcache.revalidate_path=0
+
+; If disabled, all PHPDoc comments are dropped from the code to reduce the
+; size of the optimized code.
+;opcache.save_comments=1
+
+; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
+; may be always stored (save_comments=1), but not loaded by applications
+; that don't need them anyway.
+;opcache.load_comments=1
+
+; If enabled, a fast shutdown sequence is used for the accelerated code
+;opcache.fast_shutdown=0
+
+; Allow file existence override (file_exists, etc.) performance feature.
+;opcache.enable_file_override=0
+
+; A bitmask, where each bit enables or disables the appropriate OPcache
+; passes
+;opcache.optimization_level=0xffffffff
+
+;opcache.inherited_hack=1
+;opcache.dups_fix=0
+
+; The location of the OPcache blacklist file (wildcards allowed).
+; Each OPcache blacklist file is a text file that holds the names of files
+; that should not be accelerated. The file format is to add each filename
+; to a new line. The filename may be a full path or just a file prefix
+; (i.e., /var/www/x blacklists all the files and directories in /var/www
+; that start with 'x'). Line starting with a ; are ignored (comments).
+;opcache.blacklist_filename=
+
+; Allows exclusion of large files from being cached. By default all files
+; are cached.
+;opcache.max_file_size=0
+
+; Check the cache checksum each N requests.
+; The default value of "0" means that the checks are disabled.
+;opcache.consistency_checks=0
+
+; How long to wait (in seconds) for a scheduled restart to begin if the cache
+; is not being accessed.
+;opcache.force_restart_timeout=180
+
+; OPcache error_log file name. Empty string assumes "stderr".
+;opcache.error_log=
+
+; All OPcache errors go to the Web server log.
+; By default, only fatal errors (level 0) or errors (level 1) are logged.
+; You can also enable warnings (level 2), info messages (level 3) or
+; debug messages (level 4).
+;opcache.log_verbosity_level=1
+
+; Preferred Shared Memory back-end. Leave empty and let the system decide.
+;opcache.preferred_memory_model=
+
+; Protect the shared memory from unexpected writing during script execution.
+; Useful for internal debugging only.
+;opcache.protect_memory=0
+
+[curl]
+; A default value for the CURLOPT_CAINFO option. This is required to be an
+; absolute path.
+;curl.cainfo =
+
+[openssl]
+; The location of a Certificate Authority (CA) file on the local filesystem
+; to use when verifying the identity of SSL/TLS peers. Most users should
+; not specify a value for this directive as PHP will attempt to use the
+; OS-managed cert stores in its absence. If specified, this value may still
+; be overridden on a per-stream basis via the "cafile" SSL stream context
+; option.
+;openssl.cafile=
+
+; If openssl.cafile is not specified or if the CA file is not found, the
+; directory pointed to by openssl.capath is searched for a suitable
+; certificate. This value must be a correctly hashed certificate directory.
+; Most users should not specify a value for this directive as PHP will
+; attempt to use the OS-managed cert stores in its absence. If specified,
+; this value may still be overridden on a per-stream basis via the "capath"
+; SSL stream context option.
+;openssl.capath=
+
+; Local Variables:
+; tab-width: 4
+; End:
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it is
+; much more verbose when it comes to errors. We recommend using the
+; development version only in development environments, as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+; This is php.ini-development INI file.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: On
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It is
+; generally recommended that <?php and ?> should be used and that this feature
+; should be disabled, as enabling it may result in issues when generating XML
+; documents, however this remains supported for backward compatibility reasons.
+; Note that this directive does not control the <?= shorthand tag, which can be
+; used regardless of this directive.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+; If enabled, scripts may be written in encodings that are incompatible with
+; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
+; encodings. To use this feature, mbstring extension must be enabled.
+; Default: Off
+;zend.multibyte = Off
+
+; Allows to set the default encoding for the scripts. This value will be used
+; unless "declare(encoding=...)" directive appears at the top of the script.
+; Only affects if zend.multibyte is set.
+; Default: ""
+;zend.script_encoding =
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it is automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL (Show all errors, warnings and notices including coding standards.)
+; E_ALL & ~E_NOTICE (Show all errors, except for notices)
+; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+; http://php.net/error-reporting
+error_reporting = E_ALL
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; For production environments, we recommend logging errors rather than
+; sending them to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. We strongly recommend you
+; set this to 'off' for production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of formatting the
+; error message as HTML for easier reading. This directive controls whether
+; the error message is formatted as HTML or not.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: On
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set to On *and* docref_root is not empty, then PHP
+; produces clickable error messages that direct to a page describing the error
+; or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty, in which
+; case no links to documentation are generated.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on Windows).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. G,P,C,E & S are abbreviations for the following respective super
+; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
+; paid for the registration of these arrays and because ENV is not as commonly
+; used as the others, ENV is not recommended on productions servers. You
+; can still get access to the environment variables through getenv() should you
+; need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P & C) should be
+; registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive
+; are specified in the same manner as the variables_order directive,
+; EXCEPT one. Leaving this value empty will cause PHP to use the value set
+; in the variables_order directive. It does not mean it will leave the super
+; globals array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the ENV, REQUEST and SERVER variables are created when they're
+; first used (Just In Time) instead of when the script starts. If these
+; variables are not used within a script, having this directive on will result
+; in a performance gain. The PHP directive register_argc_argv must be disabled
+; for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Whether PHP will read the POST data.
+; This option is enabled by default.
+; Most likely, you won't want to disable this option globally. It causes $_POST
+; and $_FILES to always be empty; the only way you will be able to read the
+; POST data will be through the php://input stream wrapper. This can be useful
+; to proxy requests or to process the POST data in a memory efficient fashion.
+; http://php.net/enable-post-data-reading
+;enable_post_data_reading = Off
+
+; Maximum size of POST data that PHP will accept.
+; Its value may be 0 to disable the limit. It is ignored if POST data reading
+; is disabled through enable_post_data_reading.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to UTF-8.
+; http://php.net/default-charset
+default_charset = "UTF-8"
+
+; PHP internal character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/internal-encoding
+;internal_encoding =
+
+; PHP input character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/input-encoding
+;input_encoding =
+
+; PHP output character encoding is set to empty.
+; If empty, default_charset is used.
+; mbstring or iconv output handler is used.
+; See also output_buffer.
+; http://php.net/output-encoding
+;output_encoding =
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature and it will be removed in a future version.
+; If post reading is disabled through enable_post_data_reading,
+; $HTTP_RAW_POST_DATA is *NOT* populated.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = -1
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Directory where the temporary files should be placed.
+; Defaults to the system default (see sys_get_temp_dir)
+; sys_temp_dir = "/tmp"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env =
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If set to 0, PHP sends Status: header that
+; is supported by Apache. When this option is set to 1, PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8_12c.dll ; Use with Oracle Database 12c Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[CLI Server]
+; Whether the CLI web server uses ANSI color coding in its terminal output.
+cli_server.color = On
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; If empty, default_charset or input_encoding or iconv.input_encoding is used.
+; The precedence is: default_charset < intput_encoding < iconv.input_encoding
+;iconv.input_encoding =
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;iconv.internal_encoding =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; If empty, default_charset or output_encoding or iconv.output_encoding is used.
+; The precedence is: default_charset < output_encoding < iconv.output_encoding
+; To use an output encoding conversion, iconv's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+;iconv.output_encoding =
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail().
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+; Log mail to syslog (Event Log on Windows).
+;mail.log = syslog
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if
+; your OS has problems with many files in one directory, and is
+; a more efficient layout for servers that handle many sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use strict session mode.
+; Strict session mode does not accept uninitialized session ID and regenerate
+; session ID if browser sends uninitialized session ID. Strict mode protects
+; applications from session fixation via session adoption vulnerability. It is
+; disabled by default for maximum compatibility, but enabling it is encouraged.
+; https://wiki.php.net/rfc/strict_sessions
+session.use_strict_mode = 0
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the be-all and end-all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 -type f | xargs rm
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+;session.entropy_length = 32
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; Defaults to /dev/urandom
+; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
+; If neither are found at compile time, the default is no entropy file.
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users' security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; Enable upload progress tracking in $_SESSION
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.enabled
+;session.upload_progress.enabled = On
+
+; Cleanup the progress information as soon as all POST data has been read
+; (i.e. upload completed).
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.cleanup
+;session.upload_progress.cleanup = On
+
+; A prefix used for the upload progress key in $_SESSION
+; Default Value: "upload_progress_"
+; Development Value: "upload_progress_"
+; Production Value: "upload_progress_"
+; http://php.net/session.upload-progress.prefix
+;session.upload_progress.prefix = "upload_progress_"
+
+; The index name (concatenated with the prefix) in $_SESSION
+; containing the upload progress information
+; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; http://php.net/session.upload-progress.name
+;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
+
+; How frequently the upload progress should be updated.
+; Given either in percentages (per-file), or in bytes
+; Default Value: "1%"
+; Development Value: "1%"
+; Production Value: "1%"
+; http://php.net/session.upload-progress.freq
+;session.upload_progress.freq = "1%"
+
+; The minimum delay between updates, in seconds
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.upload-progress.min-freq
+;session.upload_progress.min_freq = "1"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatibility_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; This affects mb_send_mail() and mbstrig.detect_order.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; internal/script encoding.
+; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;mbstring.internal_encoding =
+
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; http input encoding.
+; mbstring.encoding_traslation = On is needed to use this setting.
+; If empty, default_charset or input_encoding or mbstring.input is used.
+; The precedence is: default_charset < intput_encoding < mbsting.http_input
+; http://php.net/mbstring.http-input
+;mbstring.http_input =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; http output encoding.
+; mb_output_handler must be registered as output buffer to function.
+; If empty, default_charset or output_encoding or mbstring.http_output is used.
+; The precedence is: default_charset < output_encoding < mbstring.http_output
+; To use an output encoding conversion, mbstring's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+; http://php.net/mbstring.http-output
+;mbstring.http_output =
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; "auto" detect order is changed according to mbstring.language
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+; Default: Off
+;mbstring.strict_detection = On
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[opcache]
+; Determines if Zend OPCache is enabled
+;opcache.enable=0
+
+; Determines if Zend OPCache is enabled for the CLI version of PHP
+;opcache.enable_cli=0
+
+; The OPcache shared memory storage size.
+;opcache.memory_consumption=64
+
+; The amount of memory for interned strings in Mbytes.
+;opcache.interned_strings_buffer=4
+
+; The maximum number of keys (scripts) in the OPcache hash table.
+; Only numbers between 200 and 100000 are allowed.
+;opcache.max_accelerated_files=2000
+
+; The maximum percentage of "wasted" memory until a restart is scheduled.
+;opcache.max_wasted_percentage=5
+
+; When this directive is enabled, the OPcache appends the current working
+; directory to the script key, thus eliminating possible collisions between
+; files with the same name (basename). Disabling the directive improves
+; performance, but may break existing applications.
+;opcache.use_cwd=1
+
+; When disabled, you must reset the OPcache manually or restart the
+; webserver for changes to the filesystem to take effect.
+;opcache.validate_timestamps=1
+
+; How often (in seconds) to check file timestamps for changes to the shared
+; memory storage allocation. ("1" means validate once per second, but only
+; once per request. "0" means always validate)
+;opcache.revalidate_freq=2
+
+; Enables or disables file search in include_path optimization
+;opcache.revalidate_path=0
+
+; If disabled, all PHPDoc comments are dropped from the code to reduce the
+; size of the optimized code.
+;opcache.save_comments=1
+
+; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
+; may be always stored (save_comments=1), but not loaded by applications
+; that don't need them anyway.
+;opcache.load_comments=1
+
+; If enabled, a fast shutdown sequence is used for the accelerated code
+;opcache.fast_shutdown=0
+
+; Allow file existence override (file_exists, etc.) performance feature.
+;opcache.enable_file_override=0
+
+; A bitmask, where each bit enables or disables the appropriate OPcache
+; passes
+;opcache.optimization_level=0xffffffff
+
+;opcache.inherited_hack=1
+;opcache.dups_fix=0
+
+; The location of the OPcache blacklist file (wildcards allowed).
+; Each OPcache blacklist file is a text file that holds the names of files
+; that should not be accelerated. The file format is to add each filename
+; to a new line. The filename may be a full path or just a file prefix
+; (i.e., /var/www/x blacklists all the files and directories in /var/www
+; that start with 'x'). Line starting with a ; are ignored (comments).
+;opcache.blacklist_filename=
+
+; Allows exclusion of large files from being cached. By default all files
+; are cached.
+;opcache.max_file_size=0
+
+; Check the cache checksum each N requests.
+; The default value of "0" means that the checks are disabled.
+;opcache.consistency_checks=0
+
+; How long to wait (in seconds) for a scheduled restart to begin if the cache
+; is not being accessed.
+;opcache.force_restart_timeout=180
+
+; OPcache error_log file name. Empty string assumes "stderr".
+;opcache.error_log=
+
+; All OPcache errors go to the Web server log.
+; By default, only fatal errors (level 0) or errors (level 1) are logged.
+; You can also enable warnings (level 2), info messages (level 3) or
+; debug messages (level 4).
+;opcache.log_verbosity_level=1
+
+; Preferred Shared Memory back-end. Leave empty and let the system decide.
+;opcache.preferred_memory_model=
+
+; Protect the shared memory from unexpected writing during script execution.
+; Useful for internal debugging only.
+;opcache.protect_memory=0
+
+[curl]
+; A default value for the CURLOPT_CAINFO option. This is required to be an
+; absolute path.
+;curl.cainfo =
+
+[openssl]
+; The location of a Certificate Authority (CA) file on the local filesystem
+; to use when verifying the identity of SSL/TLS peers. Most users should
+; not specify a value for this directive as PHP will attempt to use the
+; OS-managed cert stores in its absence. If specified, this value may still
+; be overridden on a per-stream basis via the "cafile" SSL stream context
+; option.
+;openssl.cafile=
+
+; If openssl.cafile is not specified or if the CA file is not found, the
+; directory pointed to by openssl.capath is searched for a suitable
+; certificate. This value must be a correctly hashed certificate directory.
+; Most users should not specify a value for this directive as PHP will
+; attempt to use the OS-managed cert stores in its absence. If specified,
+; this value may still be overridden on a per-stream basis via the "capath"
+; SSL stream context option.
+;openssl.capath=
+
+; Local Variables:
+; tab-width: 4
+; End:
--- /dev/null
+;;;;;;;;;;;;;;;;;;;;;
+; FPM Configuration ;
+;;;;;;;;;;;;;;;;;;;;;
+
+; All relative paths in this configuration file are relative to PHP's install
+; prefix (/usr/lib/php5.3). This prefix can be dynamicaly changed by using the
+; '-p' argument from the command line.
+
+; Include one or more files. If glob(3) exists, it is used to include a bunch of
+; files from a glob(3) pattern. This directive can be used everywhere in the
+; file.
+; Relative path can also be used. They will be prefixed by:
+; - the global prefix if it's been set (-p arguement)
+; - /usr/lib/php5.3 otherwise
+;include=/etc/php/fpm-php5.3/fpm.d/*.conf
+
+;;;;;;;;;;;;;;;;;;
+; Global Options ;
+;;;;;;;;;;;;;;;;;;
+
+[global]
+; Pid file
+; Note: the default prefix is /var/lib
+; Default Value: none
+; Warning: pid file is overriden by the Gentoo init script.
+; FPM will refuse to start if you uncomment this settingi and make use of the
+; init script.
+; pid = /var/run/php-fpm.pid
+
+; Error log file
+; Note: the default prefix is /var/lib
+; Default Value: log/php-fpm.log
+error_log = /var/log/php-fpm.log
+
+; Log level
+; Possible Values: alert, error, warning, notice, debug
+; Default Value: notice
+;log_level = notice
+
+; If this number of child processes exit with SIGSEGV or SIGBUS within the time
+; interval set by emergency_restart_interval then FPM will restart. A value
+; of '0' means 'Off'.
+; Default Value: 0
+;emergency_restart_threshold = 0
+
+; Interval of time used by emergency_restart_interval to determine when
+; a graceful restart will be initiated. This can be useful to work around
+; accidental corruptions in an accelerator's shared memory.
+; Available Units: s(econds), m(inutes), h(ours), or d(ays)
+; Default Unit: seconds
+; Default Value: 0
+;emergency_restart_interval = 0
+
+; Time limit for child processes to wait for a reaction on signals from master.
+; Available units: s(econds), m(inutes), h(ours), or d(ays)
+; Default Unit: seconds
+; Default Value: 0
+;process_control_timeout = 0
+
+; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
+; Default Value: yes
+;daemonize = yes
+
+;;;;;;;;;;;;;;;;;;;;
+; Pool Definitions ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Multiple pools of child processes may be started with different listening
+; ports and different management options. The name of the pool will be
+; used in logs and stats. There is no limitation on the number of pools which
+; FPM can handle. Your system will tell you anyway :)
+
+; Start a new pool named 'www'.
+; the variable $pool can we used in any directive and will be replaced by the
+; pool name ('www' here)
+[www]
+
+; Per pool prefix
+; It only applies on the following directives:
+; - 'slowlog'
+; - 'listen' (unixsocket)
+; - 'chroot'
+; - 'chdir'
+; - 'php_values'
+; - 'php_admin_values'
+; When not set, the global prefix (or /usr/lib/php5.3) applies instead.
+; Note: This directive can also be relative to the global prefix.
+; Default Value: none
+;prefix = /path/to/pools/$pool
+
+; The address on which to accept FastCGI requests.
+; Valid syntaxes are:
+; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
+; a specific port;
+; 'port' - to listen on a TCP socket to all addresses on a
+; specific port;
+; '/path/to/unix/socket' - to listen on a unix socket.
+; Note: This value is mandatory.
+listen = 127.0.0.1:9000
+
+; Set listen(2) backlog. A value of '-1' means unlimited.
+; Default Value: 128 (-1 on FreeBSD and OpenBSD)
+;listen.backlog = -1
+
+; List of ipv4 addresses of FastCGI clients which are allowed to connect.
+; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
+; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
+; must be separated by a comma. If this value is left blank, connections will be
+; accepted from any ip address.
+; Default Value: any
+;listen.allowed_clients = 127.0.0.1
+
+; Set permissions for unix socket, if one is used. In Linux, read/write
+; permissions must be set in order to allow connections from a web server. Many
+; BSD-derived systems allow connections regardless of permissions.
+; Default Values: user and group are set as the running user
+; mode is set to 0666
+;listen.owner = nobody
+;listen.group = nobody
+;listen.mode = 0666
+
+; Unix user/group of processes
+; Note: The user is mandatory. If the group is not set, the default user's group
+; will be used.
+user = nobody
+group = nobody
+
+; Choose how the process manager will control the number of child processes.
+; Possible Values:
+; static - a fixed number (pm.max_children) of child processes;
+; dynamic - the number of child processes are set dynamically based on the
+; following directives:
+; pm.max_children - the maximum number of children that can
+; be alive at the same time.
+; pm.start_servers - the number of children created on startup.
+; pm.min_spare_servers - the minimum number of children in 'idle'
+; state (waiting to process). If the number
+; of 'idle' processes is less than this
+; number then some children will be created.
+; pm.max_spare_servers - the maximum number of children in 'idle'
+; state (waiting to process). If the number
+; of 'idle' processes is greater than this
+; number then some children will be killed.
+; Note: This value is mandatory.
+pm = dynamic
+
+; The number of child processes to be created when pm is set to 'static' and the
+; maximum number of child processes to be created when pm is set to 'dynamic'.
+; This value sets the limit on the number of simultaneous requests that will be
+; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
+; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
+; CGI.
+; Note: Used when pm is set to either 'static' or 'dynamic'
+; Note: This value is mandatory.
+pm.max_children = 50
+
+; The number of child processes created on startup.
+; Note: Used only when pm is set to 'dynamic'
+; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
+;pm.start_servers = 20
+
+; The desired minimum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.min_spare_servers = 5
+
+; The desired maximum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.max_spare_servers = 35
+
+; The number of requests each child process should execute before respawning.
+; This can be useful to work around memory leaks in 3rd party libraries. For
+; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
+; Default Value: 0
+;pm.max_requests = 500
+
+; The URI to view the FPM status page. If this value is not set, no URI will be
+; recognized as a status page. By default, the status page shows the following
+; information:
+; accepted conn - the number of request accepted by the pool;
+; pool - the name of the pool;
+; process manager - static or dynamic;
+; idle processes - the number of idle processes;
+; active processes - the number of active processes;
+; total processes - the number of idle + active processes.
+; max children reached - number of times, the process limit has been reached,
+; when pm tries to start more children (works only for
+; pm 'dynamic')
+; The values of 'idle processes', 'active processes' and 'total processes' are
+; updated each second. The value of 'accepted conn' is updated in real time.
+; Example output:
+; accepted conn: 12073
+; pool: www
+; process manager: static
+; idle processes: 35
+; active processes: 65
+; total processes: 100
+; max children reached: 1
+; By default the status page output is formatted as text/plain. Passing either
+; 'html' or 'json' as a query string will return the corresponding output
+; syntax. Example:
+; http://www.foo.bar/status
+; http://www.foo.bar/status?json
+; http://www.foo.bar/status?html
+; Note: The value must start with a leading slash (/). The value can be
+; anything, but it may not be a good idea to use the .php extension or it
+; may conflict with a real PHP file.
+; Default Value: not set
+;pm.status_path = /status
+
+; The ping URI to call the monitoring page of FPM. If this value is not set, no
+; URI will be recognized as a ping page. This could be used to test from outside
+; that FPM is alive and responding, or to
+; - create a graph of FPM availability (rrd or such);
+; - remove a server from a group if it is not responding (load balancing);
+; - trigger alerts for the operating team (24/7).
+; Note: The value must start with a leading slash (/). The value can be
+; anything, but it may not be a good idea to use the .php extension or it
+; may conflict with a real PHP file.
+; Default Value: not set
+;ping.path = /ping
+
+; This directive may be used to customize the response of a ping request. The
+; response is formatted as text/plain with a 200 response code.
+; Default Value: pong
+;ping.response = pong
+
+; The timeout for serving a single request after which the worker process will
+; be killed. This option should be used when the 'max_execution_time' ini option
+; does not stop script execution for some reason. A value of '0' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_terminate_timeout = 0
+
+; The timeout for serving a single request after which a PHP backtrace will be
+; dumped to the 'slowlog' file. A value of '0s' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_slowlog_timeout = 0
+
+; The log file for slow requests
+; Default Value: not set
+; Note: slowlog is mandatory if request_slowlog_timeout is set
+;slowlog = /var/log/php-fpm-$pool.log.slow
+
+; Set open file descriptor rlimit.
+; Default Value: system defined value
+;rlimit_files = 1024
+
+; Set max core size rlimit.
+; Possible Values: 'unlimited' or an integer greater or equal to 0
+; Default Value: system defined value
+;rlimit_core = 0
+
+; Chroot to this directory at the start. This value must be defined as an
+; absolute path. When this value is not set, chroot is not used.
+; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
+; of its subdirectories. If the pool prefix is not set, the global prefix
+; will be used instead.
+; Note: chrooting is a great security feature and should be used whenever
+; possible. However, all PHP paths will be relative to the chroot
+; (error_log, sessions.save_path, ...).
+; Default Value: not set
+;chroot =
+
+; Chdir to this directory at the start.
+; Note: relative path can be used.
+; Default Value: current directory or / when chroot
+;chdir = /var/www
+
+; Redirect worker stdout and stderr into main error log. If not set, stdout and
+; stderr will be redirected to /dev/null according to FastCGI specs.
+; Note: on highloaded environement, this can cause some delay in the page
+; process time (several ms).
+; Default Value: no
+;catch_workers_output = yes
+
+; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
+; the current environment.
+; Default Value: clean env
+;env[HOSTNAME] = $HOSTNAME
+;env[PATH] = /usr/local/bin:/usr/bin:/bin
+;env[TMP] = /tmp
+;env[TMPDIR] = /tmp
+;env[TEMP] = /tmp
+
+; Additional php.ini defines, specific to this pool of workers. These settings
+; overwrite the values previously defined in the php.ini. The directives are the
+; same as the PHP SAPI:
+; php_value/php_flag - you can set classic ini defines which can
+; be overwritten from PHP call 'ini_set'.
+; php_admin_value/php_admin_flag - these directives won't be overwritten by
+; PHP call 'ini_set'
+; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
+
+; Defining 'extension' will load the corresponding shared extension from
+; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
+; overwrite previously defined php.ini values, but will append the new value
+; instead.
+
+; Note: path INI options can be relative and will be expanded with the prefix
+; (pool, global or /usr/lib/php5.3)
+
+; Default Value: nothing is defined by default except the values in php.ini and
+; specified at startup with the -d argument
+;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
+;php_flag[display_errors] = off
+;php_admin_value[error_log] = /var/log/fpm-php.www.log
+;php_admin_flag[log_errors] = on
+;php_admin_value[memory_limit] = 32M
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it is
+; much more verbose when it comes to errors. We recommend using the
+; development version only in development environments, as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+; This is php.ini-development INI file.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: On
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It is
+; generally recommended that <?php and ?> should be used and that this feature
+; should be disabled, as enabling it may result in issues when generating XML
+; documents, however this remains supported for backward compatibility reasons.
+; Note that this directive does not control the <?= shorthand tag, which can be
+; used regardless of this directive.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+; If enabled, scripts may be written in encodings that are incompatible with
+; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
+; encodings. To use this feature, mbstring extension must be enabled.
+; Default: Off
+;zend.multibyte = Off
+
+; Allows to set the default encoding for the scripts. This value will be used
+; unless "declare(encoding=...)" directive appears at the top of the script.
+; Only affects if zend.multibyte is set.
+; Default: ""
+;zend.script_encoding =
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it is automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL (Show all errors, warnings and notices including coding standards.)
+; E_ALL & ~E_NOTICE (Show all errors, except for notices)
+; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+; http://php.net/error-reporting
+error_reporting = E_ALL
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; For production environments, we recommend logging errors rather than
+; sending them to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. We strongly recommend you
+; set this to 'off' for production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of formatting the
+; error message as HTML for easier reading. This directive controls whether
+; the error message is formatted as HTML or not.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: On
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set to On *and* docref_root is not empty, then PHP
+; produces clickable error messages that direct to a page describing the error
+; or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty, in which
+; case no links to documentation are generated.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on Windows).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. G,P,C,E & S are abbreviations for the following respective super
+; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
+; paid for the registration of these arrays and because ENV is not as commonly
+; used as the others, ENV is not recommended on productions servers. You
+; can still get access to the environment variables through getenv() should you
+; need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P & C) should be
+; registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive
+; are specified in the same manner as the variables_order directive,
+; EXCEPT one. Leaving this value empty will cause PHP to use the value set
+; in the variables_order directive. It does not mean it will leave the super
+; globals array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the ENV, REQUEST and SERVER variables are created when they're
+; first used (Just In Time) instead of when the script starts. If these
+; variables are not used within a script, having this directive on will result
+; in a performance gain. The PHP directive register_argc_argv must be disabled
+; for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Whether PHP will read the POST data.
+; This option is enabled by default.
+; Most likely, you won't want to disable this option globally. It causes $_POST
+; and $_FILES to always be empty; the only way you will be able to read the
+; POST data will be through the php://input stream wrapper. This can be useful
+; to proxy requests or to process the POST data in a memory efficient fashion.
+; http://php.net/enable-post-data-reading
+;enable_post_data_reading = Off
+
+; Maximum size of POST data that PHP will accept.
+; Its value may be 0 to disable the limit. It is ignored if POST data reading
+; is disabled through enable_post_data_reading.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to UTF-8.
+; http://php.net/default-charset
+default_charset = "UTF-8"
+
+; PHP internal character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/internal-encoding
+;internal_encoding =
+
+; PHP input character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/input-encoding
+;input_encoding =
+
+; PHP output character encoding is set to empty.
+; If empty, default_charset is used.
+; mbstring or iconv output handler is used.
+; See also output_buffer.
+; http://php.net/output-encoding
+;output_encoding =
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature and it will be removed in a future version.
+; If post reading is disabled through enable_post_data_reading,
+; $HTTP_RAW_POST_DATA is *NOT* populated.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = -1
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Directory where the temporary files should be placed.
+; Defaults to the system default (see sys_get_temp_dir)
+; sys_temp_dir = "/tmp"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env =
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If set to 0, PHP sends Status: header that
+; is supported by Apache. When this option is set to 1, PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8_12c.dll ; Use with Oracle Database 12c Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[CLI Server]
+; Whether the CLI web server uses ANSI color coding in its terminal output.
+cli_server.color = On
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; If empty, default_charset or input_encoding or iconv.input_encoding is used.
+; The precedence is: default_charset < intput_encoding < iconv.input_encoding
+;iconv.input_encoding =
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;iconv.internal_encoding =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; If empty, default_charset or output_encoding or iconv.output_encoding is used.
+; The precedence is: default_charset < output_encoding < iconv.output_encoding
+; To use an output encoding conversion, iconv's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+;iconv.output_encoding =
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail().
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+; Log mail to syslog (Event Log on Windows).
+;mail.log = syslog
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if
+; your OS has problems with many files in one directory, and is
+; a more efficient layout for servers that handle many sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use strict session mode.
+; Strict session mode does not accept uninitialized session ID and regenerate
+; session ID if browser sends uninitialized session ID. Strict mode protects
+; applications from session fixation via session adoption vulnerability. It is
+; disabled by default for maximum compatibility, but enabling it is encouraged.
+; https://wiki.php.net/rfc/strict_sessions
+session.use_strict_mode = 0
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the be-all and end-all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 -type f | xargs rm
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+;session.entropy_length = 32
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; Defaults to /dev/urandom
+; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
+; If neither are found at compile time, the default is no entropy file.
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users' security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; Enable upload progress tracking in $_SESSION
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.enabled
+;session.upload_progress.enabled = On
+
+; Cleanup the progress information as soon as all POST data has been read
+; (i.e. upload completed).
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.cleanup
+;session.upload_progress.cleanup = On
+
+; A prefix used for the upload progress key in $_SESSION
+; Default Value: "upload_progress_"
+; Development Value: "upload_progress_"
+; Production Value: "upload_progress_"
+; http://php.net/session.upload-progress.prefix
+;session.upload_progress.prefix = "upload_progress_"
+
+; The index name (concatenated with the prefix) in $_SESSION
+; containing the upload progress information
+; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; http://php.net/session.upload-progress.name
+;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
+
+; How frequently the upload progress should be updated.
+; Given either in percentages (per-file), or in bytes
+; Default Value: "1%"
+; Development Value: "1%"
+; Production Value: "1%"
+; http://php.net/session.upload-progress.freq
+;session.upload_progress.freq = "1%"
+
+; The minimum delay between updates, in seconds
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.upload-progress.min-freq
+;session.upload_progress.min_freq = "1"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatibility_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; This affects mb_send_mail() and mbstrig.detect_order.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; internal/script encoding.
+; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;mbstring.internal_encoding =
+
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; http input encoding.
+; mbstring.encoding_traslation = On is needed to use this setting.
+; If empty, default_charset or input_encoding or mbstring.input is used.
+; The precedence is: default_charset < intput_encoding < mbsting.http_input
+; http://php.net/mbstring.http-input
+;mbstring.http_input =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; http output encoding.
+; mb_output_handler must be registered as output buffer to function.
+; If empty, default_charset or output_encoding or mbstring.http_output is used.
+; The precedence is: default_charset < output_encoding < mbstring.http_output
+; To use an output encoding conversion, mbstring's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+; http://php.net/mbstring.http-output
+;mbstring.http_output =
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; "auto" detect order is changed according to mbstring.language
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+; Default: Off
+;mbstring.strict_detection = On
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[opcache]
+; Determines if Zend OPCache is enabled
+;opcache.enable=0
+
+; Determines if Zend OPCache is enabled for the CLI version of PHP
+;opcache.enable_cli=0
+
+; The OPcache shared memory storage size.
+;opcache.memory_consumption=64
+
+; The amount of memory for interned strings in Mbytes.
+;opcache.interned_strings_buffer=4
+
+; The maximum number of keys (scripts) in the OPcache hash table.
+; Only numbers between 200 and 100000 are allowed.
+;opcache.max_accelerated_files=2000
+
+; The maximum percentage of "wasted" memory until a restart is scheduled.
+;opcache.max_wasted_percentage=5
+
+; When this directive is enabled, the OPcache appends the current working
+; directory to the script key, thus eliminating possible collisions between
+; files with the same name (basename). Disabling the directive improves
+; performance, but may break existing applications.
+;opcache.use_cwd=1
+
+; When disabled, you must reset the OPcache manually or restart the
+; webserver for changes to the filesystem to take effect.
+;opcache.validate_timestamps=1
+
+; How often (in seconds) to check file timestamps for changes to the shared
+; memory storage allocation. ("1" means validate once per second, but only
+; once per request. "0" means always validate)
+;opcache.revalidate_freq=2
+
+; Enables or disables file search in include_path optimization
+;opcache.revalidate_path=0
+
+; If disabled, all PHPDoc comments are dropped from the code to reduce the
+; size of the optimized code.
+;opcache.save_comments=1
+
+; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
+; may be always stored (save_comments=1), but not loaded by applications
+; that don't need them anyway.
+;opcache.load_comments=1
+
+; If enabled, a fast shutdown sequence is used for the accelerated code
+;opcache.fast_shutdown=0
+
+; Allow file existence override (file_exists, etc.) performance feature.
+;opcache.enable_file_override=0
+
+; A bitmask, where each bit enables or disables the appropriate OPcache
+; passes
+;opcache.optimization_level=0xffffffff
+
+;opcache.inherited_hack=1
+;opcache.dups_fix=0
+
+; The location of the OPcache blacklist file (wildcards allowed).
+; Each OPcache blacklist file is a text file that holds the names of files
+; that should not be accelerated. The file format is to add each filename
+; to a new line. The filename may be a full path or just a file prefix
+; (i.e., /var/www/x blacklists all the files and directories in /var/www
+; that start with 'x'). Line starting with a ; are ignored (comments).
+;opcache.blacklist_filename=
+
+; Allows exclusion of large files from being cached. By default all files
+; are cached.
+;opcache.max_file_size=0
+
+; Check the cache checksum each N requests.
+; The default value of "0" means that the checks are disabled.
+;opcache.consistency_checks=0
+
+; How long to wait (in seconds) for a scheduled restart to begin if the cache
+; is not being accessed.
+;opcache.force_restart_timeout=180
+
+; OPcache error_log file name. Empty string assumes "stderr".
+;opcache.error_log=
+
+; All OPcache errors go to the Web server log.
+; By default, only fatal errors (level 0) or errors (level 1) are logged.
+; You can also enable warnings (level 2), info messages (level 3) or
+; debug messages (level 4).
+;opcache.log_verbosity_level=1
+
+; Preferred Shared Memory back-end. Leave empty and let the system decide.
+;opcache.preferred_memory_model=
+
+; Protect the shared memory from unexpected writing during script execution.
+; Useful for internal debugging only.
+;opcache.protect_memory=0
+
+[curl]
+; A default value for the CURLOPT_CAINFO option. This is required to be an
+; absolute path.
+;curl.cainfo =
+
+[openssl]
+; The location of a Certificate Authority (CA) file on the local filesystem
+; to use when verifying the identity of SSL/TLS peers. Most users should
+; not specify a value for this directive as PHP will attempt to use the
+; OS-managed cert stores in its absence. If specified, this value may still
+; be overridden on a per-stream basis via the "cafile" SSL stream context
+; option.
+;openssl.cafile=
+
+; If openssl.cafile is not specified or if the CA file is not found, the
+; directory pointed to by openssl.capath is searched for a suitable
+; certificate. This value must be a correctly hashed certificate directory.
+; Most users should not specify a value for this directive as PHP will
+; attempt to use the OS-managed cert stores in its absence. If specified,
+; this value may still be overridden on a per-stream basis via the "capath"
+; SSL stream context option.
+;openssl.capath=
+
+; Local Variables:
+; tab-width: 4
+; End:
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-3.0.0/html
+html_directory = /usr/share/doc/postfix-3.0.1-r1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-3.0.0/readme
+readme_directory = /usr/share/doc/postfix-3.0.1-r1/readme
inet_protocols = all
meta_directory = /etc/postfix
shlib_directory = /usr/lib64/postfix/${mail_version}
+++ /dev/null
-# Copyright 1999-2009 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License, v2 or later
-# $Header: /var/cvsroot/gentoo-x86/app-shells/bash-completion/files/bash-completion.sh-gentoo-1.2,v 1.1 2010/07/02 15:07:33 darkside Exp $
-
-# Check for interactive bash and that we haven't already been sourced.
-[ -z "$BASH_VERSION" -o -z "$PS1" -o -n "$BASH_COMPLETION" ] && return
-
-# Check for recent enough version of bash.
-bash=${BASH_VERSION%.*}; bmajor=${bash%.*}; bminor=${bash#*.}
-if [ $bmajor -gt 3 ] || [ $bmajor -eq 3 -a $bminor -ge 2 ]; then
- _load_completions() {
- declare f x loaded_pre=false
- for f; do
- if [[ -f $f ]]; then
- # Prevent loading base twice, initially and via glob
- if $loaded_pre && [[ $f == */base ]]; then
- continue
- fi
-
- # Some modules, including base, depend on the definitions
- # in .pre. See the ebuild for how this is created.
- if ! $loaded_pre; then
- if [[ ${BASH_COMPLETION-unset} == unset ]]; then
- BASH_COMPLETION="/usr/share/bash-completion/base"
- fi
- source "/usr/share/bash-completion/.pre"
- loaded_pre=true
- fi
-
- source "$f"
- fi
- done
-
- # Clean up
- $loaded_pre && source "/usr/share/bash-completion/.post"
- unset -f _load_completions # not designed to be called more than once
- }
-
- # 1. Load base, if eselected. This was previously known as
- # /etc/bash_completion
- # 2. Load completion modules, maintained via eselect bashcomp --global
- # 3. Load user completion modules, maintained via eselect bashcomp
- # 4. Load user completion file last, overrides modules at user discretion
- # This order is subject to change once upstream decides on something.
- _load_completions \
- "/etc/bash_completion.d/base" \
- ~/.bash_completion.d/base \
- "/etc/bash_completion.d/"* \
- ~/.bash_completion.d/* \
- ~/.bash_completion
-fi
-unset bash bmajor bminor
# DO NOT EDIT THIS FILE. CHANGES TO STARTUP PROFILES
# GO INTO /etc/profile NOT /etc/profile.env
-export CONFIG_PROTECT='/var/bind /usr/share/gnupg/qualified.txt'
-export CONFIG_PROTECT_MASK='/etc/gentoo-release /etc/sandbox.d /etc/php/cli-php5.5/ext-active/ /etc/php/cgi-php5.5/ext-active/ /etc/php/apache2-php5.5/ext-active/ /etc/fonts/fonts.conf /etc/terminfo /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
+export CONFIG_PROTECT='/var/bind /etc/stunnel/stunnel.conf /usr/share/gnupg/qualified.txt'
+export CONFIG_PROTECT_MASK='/etc/gentoo-release /etc/sandbox.d /etc/php/cli-php5.5/ext-active/ /etc/php/cgi-php5.5/ext-active/ /etc/php/apache2-php5.5/ext-active/ /etc/php/cli-php5.6/ext-active/ /etc/php/cgi-php5.6/ext-active/ /etc/php/apache2-php5.6/ext-active/ /etc/fonts/fonts.conf /etc/terminfo /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
export CVS_RSH='ssh'
export EDITOR='/usr/bin/vi'
-export ES_BASHCOMP_DIRS='/usr/share/bash-completion/completions'
export GCC_SPECS=''
export GUILE_LOAD_PATH='/usr/share/guile/1.8'
export HG='/usr/bin/hg'
export INFOPATH='/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.4/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/info'
-export LADSPA_PATH='/usr/lib64/ladspa'
export LESS='-R -M --shift 5'
export LESSOPEN='|lesspipe %s'
-export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.5/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.4/man/'
+export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.5/man/:/usr/lib64/php5.6/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.4/man/'
export MULTIOSDIRS='../lib64:../lib32'
export OPENGL_PROFILE='xorg-x11'
export PATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.4:/usr/lib64/subversion/bin'
PROFTPD-MIB DEFINITIONS ::= BEGIN
--
--- $Id: PROFTPD-MIB.txt,v 1.1 2013/05/15 15:20:25 castaglia Exp $
+-- $Id: PROFTPD-MIB.txt,v 1.1 2013-05-15 15:20:25 castaglia Exp $
--
IMPORTS
#SSD_NICELEVEL="-19"
# Pass ulimit parameters
+# If you are using bash in POSIX mode for your shell, note that the
+# ulimit command uses a block size of 512 bytes for the -c and -f
+# options
#rc_ulimit="-u 30"
# It's possible to define extra dependencies for services like so
# LINUX SPECIFIC OPTIONS
# This is the subsystem type. Valid options on Linux:
-# "" - nothing special
-# "lxc" - Linux Containers
-# "openvz" - Linux OpenVZ
-# "prefix" - Prefix
-# "uml" - Usermode Linux
-# "vserver" - Linux vserver
-# "xen0" - Xen0 Domain
-# "xenU" - XenU Domain
+# "" - nothing special
+# "lxc" - Linux Containers
+# "openvz" - Linux OpenVZ
+# "prefix" - Prefix
+# "uml" - Usermode Linux
+# "vserver" - Linux vserver
+# "systemd-nspawn" - Container created by the systemd-nspawn utility
+# "xen0" - Xen0 Domain
+# "xenU" - XenU Domain
# If this is commented out, automatic detection will be used.
#
# This should be set to the value representing the environment this file is
-SEARCH_DIRS_MASK="/opt/icedtea-bin-7.2.5.3"
+SEARCH_DIRS_MASK="/opt/icedtea-bin-7.2.5.5"
--- /dev/null
+/etc/init.d/binfmt
\ No newline at end of file
+++ /dev/null
-[Desktop Entry]
-Exec=xdg-user-dirs-gtk-update
-Name=User folders update
-Name[de]=Aktualisierung der Ordner des Benutzers
-Name[en_GB]=User folders update
-Name[ru]=Обновление папок пользователя
-Name[vi]=Cập nhật thư mục người dùng
-Comment=Update common folders names to match current locale
-Comment[de]=Namen der Standardordner auf die momentan verwendete Sprache aktualisieren
-Comment[en_GB]=Update common folders names to match current locale
-Comment[ru]=Обновить имена общих папок для соответствия текущему языку
-Comment[vi]=Cập nhật tên các thư mục thông dụng cho khớp với ngôn ngữ bản địa
-Terminal=false
-NotShowIn=KDE;
-Type=Application
-StartupNotify=false
-X-KDE-autostart-after=panel
+++ /dev/null
-# This controls the behaviour of xdg-user-dirs-update which is run on user login
-# You can also have per-user config in ~/.config/user-dirs.conf, or specify
-# the XDG_CONFIG_HOME and/or XDG_CONFIG_DIRS to override this
-#
-
-enabled=True
-
-# This sets the filename encoding to use. You can specify an explicit
-# encoding, or "locale" which means the encoding of the users locale
-# will be used
-filename_encoding=UTF-8
+++ /dev/null
-# Default settings for user directories
-#
-# The values are relative pathnames from the home directory and
-# will be translated on a per-path-element basis into the users locale
-DESKTOP=Desktop
-DOWNLOAD=Downloads
-TEMPLATES=Templates
-PUBLICSHARE=Public
-DOCUMENTS=Documents
-MUSIC=Music
-PICTURES=Pictures
-VIDEOS=Videos
-# Another alternative is:
-#MUSIC=Documents/Music
-#PICTURES=Documents/Pictures
-#VIDEOS=Documents/Videos
<?xml version="1.0"?>
<!DOCTYPE catalog PUBLIC "-//OASIS//DTD Entity Resolution XML Catalog V1.0//EN" "http://www.oasis-open.org/committees/entity/release/1.0/catalog.dtd">
<catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog">
- <public publicId="-//OMF//DTD Scrollkeeper OMF Variant V1.0//EN" uri="/usr/share/xml/scrollkeeper/dtds/scrollkeeper-omf.dtd"/>
- <system systemId="http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd" uri="/usr/share/xml/scrollkeeper/dtds/scrollkeeper-omf.dtd"/>
<delegatePublic publicIdStartString="-//OASIS//ENTITIES DocBook" catalog="file:///etc/xml/docbook"/>
<delegatePublic publicIdStartString="-//OASIS//ELEMENTS DocBook" catalog="file:///etc/xml/docbook"/>
<delegatePublic publicIdStartString="-//OASIS//DTD DocBook" catalog="file:///etc/xml/docbook"/>
projects / config / uhu1 / etc.git / commitdiff