saving uncommitted changes in /etc prior to emerge run

diff --git a/ssh/._cfg0000_ssh_config b/ssh/._cfg0000_ssh_config
new file mode 100644 (file)
index 0000000..0f76947
--- /dev/null
+++ b/ssh/._cfg0000_ssh_config
@@ -0,0 +1,53 @@
+#      $OpenBSD: ssh_config,v 1.30 2016/02/20 23:06:23 sobrado Exp $
+
+# This is the ssh client system-wide configuration file.  See
+# ssh_config(5) for more information.  This file provides defaults for
+# users, and the values can be changed in per-user configuration files
+# or on the command line.
+
+# Configuration data is parsed as follows:
+#  1. command line options
+#  2. user-specific file
+#  3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# Site-wide defaults for some commonly used options.  For a comprehensive
+# list of available options, their meanings and defaults, please see the
+# ssh_config(5) man page.
+
+# Host *
+#   ForwardAgent no
+#   ForwardX11 no
+#   RhostsRSAAuthentication no
+#   RSAAuthentication yes
+#   PasswordAuthentication yes
+#   HostbasedAuthentication no
+#   GSSAPIAuthentication no
+#   GSSAPIDelegateCredentials no
+#   BatchMode no
+#   CheckHostIP yes
+#   AddressFamily any
+#   ConnectTimeout 0
+#   StrictHostKeyChecking ask
+#   IdentityFile ~/.ssh/identity
+#   IdentityFile ~/.ssh/id_rsa
+#   IdentityFile ~/.ssh/id_dsa
+#   IdentityFile ~/.ssh/id_ecdsa
+#   IdentityFile ~/.ssh/id_ed25519
+#   Port 22
+#   Protocol 2
+#   Cipher 3des
+#   Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
+#   MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160
+#   EscapeChar ~
+#   Tunnel no
+#   TunnelDevice any:any
+#   PermitLocalCommand no
+#   VisualHostKey no
+#   ProxyCommand ssh -q -W %h:%p gateway.example.com
+#   RekeyLimit 1G 1h
+
+# Send locale environment variables #367017
+SendEnv LANG LC_*

diff --git a/ssh/._cfg0000_sshd_config b/ssh/._cfg0000_sshd_config
new file mode 100644 (file)
index 0000000..20d455d
--- /dev/null
+++ b/ssh/._cfg0000_sshd_config
@@ -0,0 +1,152 @@
+#      $OpenBSD: sshd_config,v 1.98 2016/02/17 05:29:04 djm Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+# The default requires explicit activation of protocol 1
+#Protocol 2
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin prohibit-password
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+#AuthorizedKeysFile    .ssh/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+PasswordAuthentication no
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+PrintMotd no
+PrintLastLog no
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation sandbox
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS no
+#PidFile /run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# here are the new patched ldap related tokens
+# entries in your LDAP must have posixAccount & ldapPublicKey objectclass
+#UseLPK yes
+#LpkLdapConf /etc/ldap.conf
+#LpkServers  ldap://10.1.7.1/ ldap://10.1.7.2/
+#LpkUserDN   ou=users,dc=phear,dc=org
+#LpkGroupDN  ou=groups,dc=phear,dc=org
+#LpkBindDN cn=Manager,dc=phear,dc=org
+#LpkBindPw secret
+#LpkServerGroup mail
+#LpkFilter (hostAccess=master.phear.org)
+#LpkForceTLS no
+#LpkSearchTimelimit 3
+#LpkBindTimelimit 3
+#LpkPubKeyAttr sshPublicKey
+
+# override default of no subsystems
+Subsystem      sftp    /usr/lib64/misc/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#      X11Forwarding no
+#      AllowTcpForwarding no
+#      PermitTTY no
+#      ForceCommand cvs server
+
+# Allow client to pass locale environment variables #367017
+AcceptEnv LANG LC_*