maybe chmod 0644 'apache2/mods-available/mpm_worker.load'
maybe chmod 0644 'apache2/mods-available/negotiation.conf'
maybe chmod 0644 'apache2/mods-available/negotiation.load'
+maybe chmod 0644 'apache2/mods-available/php8.2.conf'
+maybe chmod 0644 'apache2/mods-available/php8.2.load'
maybe chmod 0644 'apache2/mods-available/proxy.conf'
maybe chmod 0644 'apache2/mods-available/proxy.load'
maybe chmod 0644 'apache2/mods-available/proxy_ajp.load'
maybe chmod 0644 'cron.d/.placeholder'
maybe chmod 0644 'cron.d/backup'
maybe chmod 0644 'cron.d/e2scrub_all'
+maybe chmod 0644 'cron.d/php'
+maybe chmod 0644 'cron.d/roundcube-core'
maybe chmod 0755 'cron.daily'
maybe chmod 0644 'cron.daily/.placeholder'
maybe chmod 0755 'cron.daily/apache2'
maybe chmod 0755 'cruft'
maybe chmod 0755 'cruft/filters-unex'
maybe chmod 0644 'cruft/filters-unex/etckeeper'
+maybe chmod 0755 'dbconfig-common'
+maybe chmod 0600 'dbconfig-common/config'
maybe chmod 0755 'dbus-1'
maybe chmod 0755 'dbus-1/session.d'
maybe chmod 0755 'dbus-1/system.d'
maybe chmod 0644 'logrotate.d/apt'
maybe chmod 0644 'logrotate.d/btmp'
maybe chmod 0644 'logrotate.d/chrony'
+maybe chmod 0644 'logrotate.d/dbconfig-common'
maybe chmod 0644 'logrotate.d/dpkg'
maybe chmod 0644 'logrotate.d/mariadb'
maybe chmod 0644 'logrotate.d/redis-server'
+maybe chmod 0644 'logrotate.d/roundcube-core'
maybe chmod 0644 'logrotate.d/rspamd'
maybe chmod 0644 'logrotate.d/rsyslog'
maybe chmod 0644 'logrotate.d/wtmp'
maybe chmod 0755 'perl'
maybe chmod 0755 'perl/Net'
maybe chmod 0644 'perl/Net/libnet.cfg'
+maybe chmod 0755 'php'
+maybe chmod 0755 'php/8.2'
+maybe chmod 0755 'php/8.2/apache2'
+maybe chmod 0755 'php/8.2/apache2/conf.d'
+maybe chmod 0644 'php/8.2/apache2/php.ini'
+maybe chmod 0755 'php/8.2/cli'
+maybe chmod 0755 'php/8.2/cli/conf.d'
+maybe chmod 0644 'php/8.2/cli/php.ini'
+maybe chmod 0755 'php/8.2/mods-available'
+maybe chmod 0644 'php/8.2/mods-available/calendar.ini'
+maybe chmod 0644 'php/8.2/mods-available/ctype.ini'
+maybe chmod 0644 'php/8.2/mods-available/dom.ini'
+maybe chmod 0644 'php/8.2/mods-available/enchant.ini'
+maybe chmod 0644 'php/8.2/mods-available/exif.ini'
+maybe chmod 0644 'php/8.2/mods-available/ffi.ini'
+maybe chmod 0644 'php/8.2/mods-available/fileinfo.ini'
+maybe chmod 0644 'php/8.2/mods-available/ftp.ini'
+maybe chmod 0644 'php/8.2/mods-available/gd.ini'
+maybe chmod 0644 'php/8.2/mods-available/gettext.ini'
+maybe chmod 0644 'php/8.2/mods-available/iconv.ini'
+maybe chmod 0644 'php/8.2/mods-available/intl.ini'
+maybe chmod 0644 'php/8.2/mods-available/mbstring.ini'
+maybe chmod 0644 'php/8.2/mods-available/mysqli.ini'
+maybe chmod 0644 'php/8.2/mods-available/mysqlnd.ini'
+maybe chmod 0644 'php/8.2/mods-available/opcache.ini'
+maybe chmod 0644 'php/8.2/mods-available/pdo.ini'
+maybe chmod 0644 'php/8.2/mods-available/pdo_mysql.ini'
+maybe chmod 0644 'php/8.2/mods-available/phar.ini'
+maybe chmod 0644 'php/8.2/mods-available/posix.ini'
+maybe chmod 0644 'php/8.2/mods-available/readline.ini'
+maybe chmod 0644 'php/8.2/mods-available/shmop.ini'
+maybe chmod 0644 'php/8.2/mods-available/simplexml.ini'
+maybe chmod 0644 'php/8.2/mods-available/sockets.ini'
+maybe chmod 0644 'php/8.2/mods-available/sysvmsg.ini'
+maybe chmod 0644 'php/8.2/mods-available/sysvsem.ini'
+maybe chmod 0644 'php/8.2/mods-available/sysvshm.ini'
+maybe chmod 0644 'php/8.2/mods-available/tokenizer.ini'
+maybe chmod 0644 'php/8.2/mods-available/xml.ini'
+maybe chmod 0644 'php/8.2/mods-available/xmlreader.ini'
+maybe chmod 0644 'php/8.2/mods-available/xmlwriter.ini'
+maybe chmod 0644 'php/8.2/mods-available/xsl.ini'
+maybe chmod 0644 'php/8.2/mods-available/zip.ini'
maybe chmod 0755 'postfix'
maybe chmod 0644 'postfix/.gitignore'
maybe chmod 0644 'postfix/access'
maybe chmod 0755 'resolvconf'
maybe chmod 0755 'resolvconf/update-libc.d'
maybe chmod 0755 'resolvconf/update-libc.d/postfix'
+maybe chmod 0755 'roundcube'
+maybe chmod 0644 'roundcube/apache.conf'
+maybe chgrp 'www-data' 'roundcube/config.inc.php'
+maybe chmod 0640 'roundcube/config.inc.php'
+maybe chmod 0644 'roundcube/debian-db-roundcube.php'
+maybe chmod 0644 'roundcube/defaults.inc.php'
+maybe chmod 0644 'roundcube/htaccess'
+maybe chmod 0644 'roundcube/lighttpd.conf'
+maybe chmod 0644 'roundcube/mimetypes.php'
+maybe chmod 0755 'roundcube/plugins'
+maybe chmod 0755 'roundcube/plugins/acl'
+maybe chmod 0644 'roundcube/plugins/acl/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/additional_message_headers'
+maybe chmod 0644 'roundcube/plugins/additional_message_headers/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/authres_status'
+maybe chmod 0644 'roundcube/plugins/authres_status/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/compose_addressbook'
+maybe chmod 0644 'roundcube/plugins/compose_addressbook/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/database_attachments'
+maybe chmod 0644 'roundcube/plugins/database_attachments/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/dovecot_impersonate'
+maybe chmod 0644 'roundcube/plugins/dovecot_impersonate/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/emoticons'
+maybe chmod 0644 'roundcube/plugins/emoticons/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/enigma'
+maybe chmod 0644 'roundcube/plugins/enigma/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/help'
+maybe chmod 0644 'roundcube/plugins/help/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/html5_notifier'
+maybe chmod 0644 'roundcube/plugins/html5_notifier/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/http_authentication'
+maybe chmod 0644 'roundcube/plugins/http_authentication/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/jqueryui'
+maybe chmod 0644 'roundcube/plugins/jqueryui/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/keyboard_shortcuts'
+maybe chmod 0644 'roundcube/plugins/keyboard_shortcuts/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/krb_authentication'
+maybe chmod 0644 'roundcube/plugins/krb_authentication/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/managesieve'
+maybe chmod 0644 'roundcube/plugins/managesieve/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/markasjunk'
+maybe chmod 0644 'roundcube/plugins/markasjunk/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/message_highlight'
+maybe chmod 0644 'roundcube/plugins/message_highlight/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/new_user_identity'
+maybe chmod 0644 'roundcube/plugins/new_user_identity/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/newmail_notifier'
+maybe chmod 0644 'roundcube/plugins/newmail_notifier/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/password'
+maybe chmod 0644 'roundcube/plugins/password/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/reconnect'
+maybe chmod 0644 'roundcube/plugins/reconnect/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/redundant_attachments'
+maybe chmod 0644 'roundcube/plugins/redundant_attachments/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/sauserprefs'
+maybe chmod 0644 'roundcube/plugins/sauserprefs/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/squirrelmail_usercopy'
+maybe chmod 0644 'roundcube/plugins/squirrelmail_usercopy/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/thunderbird_labels'
+maybe chmod 0644 'roundcube/plugins/thunderbird_labels/config.inc.php'
+maybe chmod 0755 'roundcube/plugins/zipdownload'
+maybe chmod 0644 'roundcube/plugins/zipdownload/config.inc.php'
maybe chmod 0644 'rpc'
maybe chmod 0755 'rspamd'
maybe chmod 0644 'rspamd/actions.conf'
--- /dev/null
+/usr/bin/phar.default
\ No newline at end of file
--- /dev/null
+/usr/share/man/man1/phar.default.1.gz
\ No newline at end of file
--- /dev/null
+/usr/bin/phar.phar.default
\ No newline at end of file
--- /dev/null
+/usr/share/man/man1/phar.phar.default.1.gz
\ No newline at end of file
--- /dev/null
+/usr/bin/php.default
\ No newline at end of file
--- /dev/null
+/usr/share/man/man1/php.default.1.gz
\ No newline at end of file
--- /dev/null
+/etc/roundcube/apache.conf
\ No newline at end of file
--- /dev/null
+../conf-available/roundcube.conf
\ No newline at end of file
--- /dev/null
+# Using (?:pattern) instead of (pattern) is a small optimization that
+# avoid capturing the matching pattern (as $1) which isn't used here
+<FilesMatch ".+\.ph(?:ar|p|tml)$">
+ SetHandler application/x-httpd-php
+</FilesMatch>
+<FilesMatch ".+\.phps$">
+ SetHandler application/x-httpd-php-source
+ # Deny access to raw php sources by default
+ # To re-enable it's recommended to enable access to the files
+ # only in specific virtual host or directory
+ Require all denied
+</FilesMatch>
+# Deny access to files without filename (e.g. '.php')
+<FilesMatch "^\.ph(?:ar|p|ps|tml)$">
+ Require all denied
+</FilesMatch>
+
+# Running PHP scripts in user directories is disabled by default
+#
+# To re-enable PHP in user directories comment the following lines
+# (from <IfModule ...> to </IfModule>.) Do NOT set it to On as it
+# prevents .htaccess files from disabling it.
+<IfModule mod_userdir.c>
+ <Directory /home/*/public_html>
+ php_admin_flag engine Off
+ </Directory>
+</IfModule>
--- /dev/null
+# Conflicts: php5
+# Depends: mpm_prefork
+LoadModule php_module /usr/lib/apache2/modules/libphp8.2.so
+++ /dev/null
-../mods-available/mpm_event.conf
\ No newline at end of file
+++ /dev/null
-../mods-available/mpm_event.load
\ No newline at end of file
--- /dev/null
+../mods-available/mpm_prefork.conf
\ No newline at end of file
--- /dev/null
+../mods-available/mpm_prefork.load
\ No newline at end of file
--- /dev/null
+../mods-available/php8.2.conf
\ No newline at end of file
--- /dev/null
+../mods-available/php8.2.load
\ No newline at end of file
--- /dev/null
+# /etc/cron.d/php@PHP_VERSION@: crontab fragment for PHP
+# This purges session files in session.save_path older than X,
+# where X is defined in seconds as the largest value of
+# session.gc_maxlifetime from all your SAPI php.ini files
+# or 24 minutes if not defined. The script triggers only
+# when session.save_handler=files.
+#
+# WARNING: The scripts tries hard to honour all relevant
+# session PHP options, but if you do something unusual
+# you have to disable this script and take care of your
+# sessions yourself.
+
+# Look for and purge old sessions every 30 minutes
+09,39 * * * * root [ -x /usr/lib/php/sessionclean ] && if [ ! -d /run/systemd/system ]; then /usr/lib/php/sessionclean; fi
--- /dev/null
+# Note: This is a no-op when PID1 is systemd
+#
+# Database cleaning: remove old records that were marked as deleted
+0 5 * * * www-data test -d /run/systemd/system || /usr/share/roundcube/bin/cleandb.sh >/dev/null
+
+# Purge expired sessions, caches and tempfiles
+5,35 * * * * www-data test -d /run/systemd/system || /usr/share/roundcube/bin/gc.sh
--- /dev/null
+# dbconfig-common system-wide configuration options
+
+# dbc_remember_admin_pass: should we cache administrative passwords?
+# set to "true" to keep admin passwords cached in debconf
+dbc_remember_admin_pass='false'
+
+# dbc_remote_questions_default: will we be likely to install on remote servers?
+# set to "true" to raise the priority of debconf questions related to
+# database installation on remote servers (for database types that support this)
+dbc_remote_questions_default='false'
+
--- /dev/null
+/etc/roundcube/lighttpd.conf
\ No newline at end of file
--- /dev/null
+/var/log/dbconfig-common/dbc.log {
+ monthly
+ rotate 12
+ missingok
+ notifempty
+ create 600 root root
+}
--- /dev/null
+# extension used for log filenames (default: ".log") is configurable
+# with $config['log_file_ext'].
+/var/log/roundcube/*.log
+/var/log/roundcube/errors
+/var/log/roundcube/sendmail
+/var/log/roundcube/session
+/var/log/roundcube/userlogins
+{
+ create 0640 www-data adm
+ compress
+ delaycompress
+ missingok
+ notifempty
+ rotate 14
+ daily
+}
--- /dev/null
+/etc/php/8.2/mods-available/mysqlnd.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/opcache.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/pdo.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/xml.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/calendar.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/ctype.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/dom.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/enchant.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/exif.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/ffi.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/fileinfo.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/ftp.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/gd.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/gettext.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/iconv.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/intl.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/mbstring.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/mysqli.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/pdo_mysql.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/phar.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/posix.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/readline.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/shmop.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/simplexml.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/sockets.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/sysvmsg.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/sysvsem.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/sysvshm.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/tokenizer.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/xmlreader.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/xmlwriter.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/xsl.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/zip.ini
\ No newline at end of file
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable.
+; 3. A number of predefined registry keys on Windows
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (usually C:\windows)
+; See the PHP docs for more specific information.
+; https://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; https://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security-conscious applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it is
+; much more verbose when it comes to errors. We recommend using the
+; development version only in development environments, as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+; This is the php.ini-production INI file.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.sid_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+; zend.exception_ignore_args
+; Default Value: Off
+; Development Value: Off
+; Production Value: On
+
+; zend.exception_string_param_max_len
+; Default Value: 15
+; Development Value: 15
+; Production Value: 0
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to an empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; https://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It is
+; generally recommended that <?php and ?> should be used and that this feature
+; should be disabled, as enabling it may result in issues when generating XML
+; documents, however this remains supported for backward compatibility reasons.
+; Note that this directive does not control the <?= shorthand tag, which can be
+; used regardless of this directive.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; https://php.net/short-open-tag
+short_open_tag = Off
+
+; The number of significant digits displayed in floating point numbers.
+; https://php.net/precision
+precision = 14
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; https://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; https://php.net/output-handler
+;output_handler =
+
+; URL rewriter function rewrites URL on the fly by using
+; output buffer. You can set target tags by this configuration.
+; "form" tag is special tag. It will add hidden input tag to pass values.
+; Refer to session.trans_sid_tags for usage.
+; Default Value: "form="
+; Development Value: "form="
+; Production Value: "form="
+;url_rewriter.tags
+
+; URL rewriter will not rewrite absolute URL nor form by default. To enable
+; absolute URL rewrite, allowed hosts must be defined at RUNTIME.
+; Refer to session.trans_sid_hosts for more details.
+; Default Value: ""
+; Development Value: ""
+; Production Value: ""
+;url_rewriter.hosts
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; https://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; https://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; https://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; https://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; The unserialize_max_depth specifies the default depth limit for unserialized
+; structures. Setting the depth limit too high may result in stack overflows
+; during unserialization. The unserialize_max_depth ini setting can be
+; overridden by the max_depth option on individual unserialize() calls.
+; A value of 0 disables the depth limit.
+;unserialize_max_depth = 4096
+
+; When floats & doubles are serialized, store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+; The value is also used for json_encode when encoding double values.
+; If -1 is used, then dtoa mode 0 is used which automatically select the best
+; precision.
+serialize_precision = -1
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+; Note: disables the realpath cache
+; https://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions.
+; It receives a comma-delimited list of function names.
+; https://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes.
+; It receives a comma-delimited list of class names.
+; https://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; https://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; https://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; Note: if open_basedir is set, the cache is disabled
+; https://php.net/realpath-cache-size
+;realpath_cache_size = 4096k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; https://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; https://php.net/zend.enable-gc
+zend.enable_gc = On
+
+; If enabled, scripts may be written in encodings that are incompatible with
+; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
+; encodings. To use this feature, mbstring extension must be enabled.
+;zend.multibyte = Off
+
+; Allows to set the default encoding for the scripts. This value will be used
+; unless "declare(encoding=...)" directive appears at the top of the script.
+; Only affects if zend.multibyte is set.
+;zend.script_encoding =
+
+; Allows to include or exclude arguments from stack traces generated for exceptions.
+; In production, it is recommended to turn this setting on to prohibit the output
+; of sensitive information in stack traces
+; Default Value: Off
+; Development Value: Off
+; Production Value: On
+zend.exception_ignore_args = On
+
+; Allows setting the maximum string length in an argument of a stringified stack trace
+; to a value between 0 and 1000000.
+; This has no effect when zend.exception_ignore_args is enabled.
+; Default Value: 15
+; Development Value: 15
+; Production Value: 0
+; In production, it is recommended to set this to 0 to reduce the output
+; of sensitive information in stack traces.
+zend.exception_string_param_max_len = 0
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; https://php.net/expose-php
+expose_php = Off
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; https://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; https://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; https://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+;max_input_vars = 1000
+
+; How many multipart body parts (combined input variable and file uploads) may
+; be accepted.
+; Default Value: -1 (Sum of max_input_vars and max_file_uploads)
+;max_multipart_body_parts = 1500
+
+; Maximum amount of memory a script may consume
+; https://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it is automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL (Show all errors, warnings and notices including coding standards.)
+; E_ALL & ~E_NOTICE (Show all errors, except for notices)
+; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; Default Value: E_ALL
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+; https://php.net/error-reporting
+error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; For production environments, we recommend logging errors rather than
+; sending them to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; https://php.net/display-errors
+display_errors = Off
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. We strongly recommend you set this to 'off'
+; for production servers to avoid leaking configuration details.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; https://php.net/display-startup-errors
+display_startup_errors = Off
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; https://php.net/log-errors
+log_errors = On
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; https://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; https://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This is only effective in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; https://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is off by default.
+;report_zend_debug = 0
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; https://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of formatting the
+; error message as HTML for easier reading. This directive controls whether
+; the error message is formatted as HTML or not.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; https://php.net/html-errors
+;html_errors = On
+
+; If html_errors is set to On *and* docref_root is not empty, then PHP
+; produces clickable error messages that direct to a page describing the error
+; or function causing the error in detail.
+; You can download a copy of the PHP manual from https://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty, in which
+; case no links to documentation are generated.
+; Note: Never use this feature for production boxes.
+; https://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; https://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; https://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; https://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; https://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on Windows).
+;error_log = syslog
+
+; The syslog ident is a string which is prepended to every message logged
+; to syslog. Only used when error_log is set to syslog.
+;syslog.ident = php
+
+; The syslog facility is used to specify what type of program is logging
+; the message. Only used when error_log is set to syslog.
+;syslog.facility = user
+
+; Set this to disable filtering control characters (the default).
+; Some loggers only accept NVT-ASCII, others accept anything that's not
+; control characters. If your logger accepts everything, then no filtering
+; is needed at all.
+; Allowed values are:
+; ascii (all printable ASCII characters and NL)
+; no-ctrl (all characters except control characters)
+; all (all characters)
+; raw (like "all", but messages are not split at newlines)
+; https://php.net/syslog.filter
+;syslog.filter = ascii
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; https://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; https://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. G,P,C,E & S are abbreviations for the following respective super
+; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
+; paid for the registration of these arrays and because ENV is not as commonly
+; used as the others, ENV is not recommended on productions servers. You
+; can still get access to the environment variables through getenv() should you
+; need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; https://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P & C) should be
+; registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive
+; are specified in the same manner as the variables_order directive,
+; EXCEPT one. Leaving this value empty will cause PHP to use the value set
+; in the variables_order directive. It does not mean it will leave the super
+; globals array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; https://php.net/request-order
+request_order = "GP"
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; https://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the ENV, REQUEST and SERVER variables are created when they're
+; first used (Just In Time) instead of when the script starts. If these
+; variables are not used within a script, having this directive on will result
+; in a performance gain. The PHP directive register_argc_argv must be disabled
+; for this directive to have any effect.
+; https://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Whether PHP will read the POST data.
+; This option is enabled by default.
+; Most likely, you won't want to disable this option globally. It causes $_POST
+; and $_FILES to always be empty; the only way you will be able to read the
+; POST data will be through the php://input stream wrapper. This can be useful
+; to proxy requests or to process the POST data in a memory efficient fashion.
+; https://php.net/enable-post-data-reading
+;enable_post_data_reading = Off
+
+; Maximum size of POST data that PHP will accept.
+; Its value may be 0 to disable the limit. It is ignored if POST data reading
+; is disabled through enable_post_data_reading.
+; https://php.net/post-max-size
+post_max_size = 8M
+
+; Automatically add files before PHP document.
+; https://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; https://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a media type using the Content-Type header. To
+; disable this, simply set it to be empty.
+;
+; PHP's built-in default media type is set to text/html.
+; https://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to UTF-8.
+; https://php.net/default-charset
+default_charset = "UTF-8"
+
+; PHP internal character encoding is set to empty.
+; If empty, default_charset is used.
+; https://php.net/internal-encoding
+;internal_encoding =
+
+; PHP input character encoding is set to empty.
+; If empty, default_charset is used.
+; https://php.net/input-encoding
+;input_encoding =
+
+; PHP output character encoding is set to empty.
+; If empty, default_charset is used.
+; See also output_buffer.
+; https://php.net/output-encoding
+;output_encoding =
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+;include_path = ".:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; https://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; https://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; https://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; https://php.net/extension-dir
+;extension_dir = "./"
+; On windows:
+;extension_dir = "ext"
+
+; Directory where the temporary files should be placed.
+; Defaults to the system default (see sys_get_temp_dir)
+;sys_temp_dir = "/tmp"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; https://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; https://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; https://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env =
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; https://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside
+; of the web tree and people will not be able to circumvent .htaccess security.
+;cgi.discard_path=1
+
+; FastCGI under IIS supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; https://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If set to 0, PHP sends Status: header that
+; is supported by Apache. When this option is set to 1, PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; https://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #!
+; (shebang) at the top of the running script. This line might be needed if the
+; script support running both as stand-alone script and via PHP CGI<. PHP in CGI
+; mode skips this line and ignores its content if this directive is turned on.
+; https://php.net/cgi.check-shebang-line
+;cgi.check_shebang_line=1
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; https://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; https://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; https://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; https://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like https:// or ftp://) as files.
+; https://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; https://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; https://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; https://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; https://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename
+;
+; For example:
+;
+; extension=mysqli
+;
+; When the extension library to load is not located in the default extension
+; directory, You may specify an absolute path to the library file:
+;
+; extension=/path/to/extension/mysqli.so
+;
+; Note : The syntax used in previous PHP versions ('extension=<ext>.so' and
+; 'extension='php_<ext>.dll') is supported for legacy reasons and may be
+; deprecated in a future PHP major version. So, when it is possible, please
+; move to the new ('extension=<ext>) syntax.
+;
+; Notes for Windows environments :
+;
+; - Many DLL files are located in the ext/
+; extension folders as well as the separate PECL DLL download.
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=bz2
+
+; The ldap extension must be before curl if OpenSSL 1.0.2 and OpenLDAP is used
+; otherwise it results in segfault when unloading after using SASL.
+; See https://github.com/php/php-src/issues/8620 for more info.
+;extension=ldap
+
+;extension=curl
+;extension=ffi
+;extension=ftp
+;extension=fileinfo
+;extension=gd
+;extension=gettext
+;extension=gmp
+;extension=intl
+;extension=imap
+;extension=mbstring
+;extension=exif ; Must be after mbstring as it depends on it
+;extension=mysqli
+;extension=oci8_12c ; Use with Oracle Database 12c Instant Client
+;extension=oci8_19 ; Use with Oracle Database 19 Instant Client
+;extension=odbc
+;extension=openssl
+;extension=pdo_firebird
+;extension=pdo_mysql
+;extension=pdo_oci
+;extension=pdo_odbc
+;extension=pdo_pgsql
+;extension=pdo_sqlite
+;extension=pgsql
+;extension=shmop
+
+; The MIBS data available in the PHP distribution must be installed.
+; See https://www.php.net/manual/en/snmp.installation.php
+;extension=snmp
+
+;extension=soap
+;extension=sockets
+;extension=sodium
+;extension=sqlite3
+;extension=tidy
+;extension=xsl
+;extension=zip
+
+;zend_extension=opcache
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[CLI Server]
+; Whether the CLI web server uses ANSI color coding in its terminal output.
+cli_server.color = On
+
+[Date]
+; Defines the default timezone used by the date functions
+; https://php.net/date.timezone
+;date.timezone =
+
+; https://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; https://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; https://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.833333
+
+; https://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.833333
+
+[filter]
+; https://php.net/filter.default
+;filter.default = unsafe_raw
+
+; https://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; If empty, default_charset or input_encoding or iconv.input_encoding is used.
+; The precedence is: default_charset < input_encoding < iconv.input_encoding
+;iconv.input_encoding =
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;iconv.internal_encoding =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; If empty, default_charset or output_encoding or iconv.output_encoding is used.
+; The precedence is: default_charset < output_encoding < iconv.output_encoding
+; To use an output encoding conversion, iconv's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+;iconv.output_encoding =
+
+[imap]
+; rsh/ssh logins are disabled by default. Use this INI entry if you want to
+; enable them. Note that the IMAP library does not filter mailbox names before
+; passing them to rsh/ssh command, thus passing untrusted data to this function
+; with rsh/ssh enabled is insecure.
+;imap.enable_insecure_rsh=0
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+;intl.use_exceptions = 0
+
+[sqlite3]
+; Directory pointing to SQLite3 extensions
+; https://php.net/sqlite3.extension-dir
+;sqlite3.extension_dir =
+
+; SQLite defensive mode flag (only available from SQLite 3.26+)
+; When the defensive flag is enabled, language features that allow ordinary
+; SQL to deliberately corrupt the database file are disabled. This forbids
+; writing directly to the schema, shadow tables (eg. FTS data tables), or
+; the sqlite_dbpage virtual table.
+; https://www.sqlite.org/c3ref/c_dbconfig_defensive.html
+; (for older SQLite versions, this flag has no use)
+;sqlite3.defensive = 1
+
+[Pcre]
+; PCRE library backtracking limit.
+; https://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+; PCRE library recursion limit.
+; Please note that if you set this value to a high number you may consume all
+; the available process stack and eventually crash PHP (due to reaching the
+; stack size limit imposed by the Operating System).
+; https://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+; Enables or disables JIT compilation of patterns. This requires the PCRE
+; library to be compiled with JIT support.
+;pcre.jit=1
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; https://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+[Pdo_mysql]
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+pdo_mysql.default_socket=
+
+[Phar]
+; https://php.net/phar.readonly
+;phar.readonly = On
+
+; https://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[mail function]
+; For Win32 only.
+; https://php.net/smtp
+SMTP = localhost
+; https://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; https://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; https://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail().
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = Off
+
+; Use mixed LF and CRLF line separators to keep compatibility with some
+; RFC 2822 non conformant MTA.
+mail.mixed_lf_and_crlf = Off
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+; Log mail to syslog (Event Log on Windows).
+;mail.log = syslog
+
+[ODBC]
+; https://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; https://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; https://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; https://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; https://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; https://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; https://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; https://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; https://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; https://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; https://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; It allows the user to specify a folder where files that can be sent via LOAD DATA
+; LOCAL can exist. It is ignored if mysqli.allow_local_infile is enabled.
+;mysqli.local_infile_directory =
+
+; Allow or prevent persistent links.
+; https://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; https://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; https://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; https://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysqli_connect() (doesn't apply in safe mode).
+; https://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysqli_connect() (doesn't apply in safe mode).
+; https://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; https://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; If this option is enabled, closing a persistent connection will rollback
+; any pending transactions of this connection, before it is put back
+; into the persistent connection pool.
+;mysqli.rollback_on_cached_plink = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+mysqlnd.collect_memory_statistics = Off
+
+; Records communication from all extensions using mysqlnd to the specified log
+; file.
+; https://php.net/mysqlnd.debug
+;mysqlnd.debug =
+
+; Defines which queries will be logged.
+;mysqlnd.log_mask = 0
+
+; Default size of the mysqlnd memory pool, which is used by result sets.
+;mysqlnd.mempool_default_size = 16000
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+;mysqlnd.net_read_buffer_size = 32768
+
+; Timeout for network requests in seconds.
+;mysqlnd.net_read_timeout = 31536000
+
+; SHA-256 Authentication Plugin related. File with the MySQL server public RSA
+; key.
+;mysqlnd.sha256_server_public_key =
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; https://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; https://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; https://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; https://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; https://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables row prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; https://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Tuning: Sets the amount of LOB data that is internally returned from
+; Oracle Database when an Oracle LOB locator is initially retrieved as
+; part of a query. Setting this can improve performance by reducing
+; round-trips.
+; https://php.net/oci8.prefetch-lob-size
+; oci8.prefetch_lob_size = 0
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; https://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; https://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; https://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; https://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; https://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; https://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; https://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; https://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; https://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; https://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if
+; your OS has problems with many files in one directory, and is
+; a more efficient layout for servers that handle many sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; https://php.net/session.save-path
+;session.save_path = "/var/lib/php/sessions"
+
+; Whether to use strict session mode.
+; Strict session mode does not accept an uninitialized session ID, and
+; regenerates the session ID if the browser sends an uninitialized session ID.
+; Strict mode protects applications from session fixation via a session adoption
+; vulnerability. It is disabled by default for maximum compatibility, but
+; enabling it is encouraged.
+; https://wiki.php.net/rfc/strict_sessions
+session.use_strict_mode = 0
+
+; Whether to use cookies.
+; https://php.net/session.use-cookies
+session.use_cookies = 1
+
+; https://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the be-all and end-all of session hijacking defense, but it's a good start.
+; https://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; https://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; https://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; https://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; https://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; https://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it
+; inaccessible to browser scripting languages such as JavaScript.
+; https://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Add SameSite attribute to cookie to help mitigate Cross-Site Request Forgery (CSRF/XSRF)
+; Current valid values are "Strict", "Lax" or "None". When using "None",
+; make sure to include the quotes, as `none` is interpreted like `false` in ini files.
+; https://tools.ietf.org/html/draft-west-first-party-cookies-07
+session.cookie_samesite =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; https://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using gc_probability/gc_divisor,
+; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; https://php.net/session.gc-probability
+session.gc_probability = 0
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using gc_probability/gc_divisor,
+; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
+; For high volume production servers, using a value of 1000 is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; https://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; https://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script is the equivalent of setting
+; session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 -type f | xargs rm
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; https://php.net/session.referer-check
+session.referer_check =
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; https://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; https://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users' security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; https://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Set session ID character length. This value could be between 22 to 256.
+; Shorter length than default is supported only for compatibility reason.
+; Users should use 32 or more chars.
+; https://php.net/session.sid-length
+; Default Value: 32
+; Development Value: 26
+; Production Value: 26
+session.sid_length = 26
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; <form> is special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. <form> tag's action attribute URL will not be modified
+; unless it is specified.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form="
+; Development Value: "a=href,area=href,frame=src,form="
+; Production Value: "a=href,area=href,frame=src,form="
+; https://php.net/url-rewriter.tags
+session.trans_sid_tags = "a=href,area=href,frame=src,form="
+
+; URL rewriter does not rewrite absolute URLs by default.
+; To enable rewrites for absolute paths, target hosts must be specified
+; at RUNTIME. i.e. use ini_set()
+; <form> tags is special. PHP will check action attribute's URL regardless
+; of session.trans_sid_tags setting.
+; If no host is defined, HTTP_HOST will be used for allowed host.
+; Example value: php.net,www.php.net,wiki.php.net
+; Use "," for multiple hosts. No spaces are allowed.
+; Default Value: ""
+; Development Value: ""
+; Production Value: ""
+;session.trans_sid_hosts=""
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; https://php.net/session.hash-bits-per-character
+session.sid_bits_per_character = 5
+
+; Enable upload progress tracking in $_SESSION
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; https://php.net/session.upload-progress.enabled
+;session.upload_progress.enabled = On
+
+; Cleanup the progress information as soon as all POST data has been read
+; (i.e. upload completed).
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; https://php.net/session.upload-progress.cleanup
+;session.upload_progress.cleanup = On
+
+; A prefix used for the upload progress key in $_SESSION
+; Default Value: "upload_progress_"
+; Development Value: "upload_progress_"
+; Production Value: "upload_progress_"
+; https://php.net/session.upload-progress.prefix
+;session.upload_progress.prefix = "upload_progress_"
+
+; The index name (concatenated with the prefix) in $_SESSION
+; containing the upload progress information
+; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; https://php.net/session.upload-progress.name
+;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
+
+; How frequently the upload progress should be updated.
+; Given either in percentages (per-file), or in bytes
+; Default Value: "1%"
+; Development Value: "1%"
+; Production Value: "1%"
+; https://php.net/session.upload-progress.freq
+;session.upload_progress.freq = "1%"
+
+; The minimum delay between updates, in seconds
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; https://php.net/session.upload-progress.min-freq
+;session.upload_progress.min_freq = "1"
+
+; Only write session data when session data is changed. Enabled by default.
+; https://php.net/session.lazy-write
+;session.lazy_write = On
+
+[Assertion]
+; Switch whether to compile assertions at all (to have no overhead at run-time)
+; -1: Do not compile at all
+; 0: Jump over assertion at run-time
+; 1: Execute assertions
+; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1)
+; Default Value: 1
+; Development Value: 1
+; Production Value: -1
+; https://php.net/zend.assertions
+zend.assertions = -1
+
+; Assert(expr); active by default.
+; https://php.net/assert.active
+;assert.active = On
+
+; Throw an AssertionError on failed assertions
+; https://php.net/assert.exception
+;assert.exception = On
+
+; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active)
+; https://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; https://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; https://php.net/assert.callback
+;assert.callback = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; https://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; https://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a component's typelib on com_load()
+; https://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; https://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; https://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+; The version of the .NET framework to use. The value of the setting are the first three parts
+; of the framework's version number, separated by dots, and prefixed with "v", e.g. "v4.0.30319".
+;com.dotnet_version=
+
+[mbstring]
+; language for internal character representation.
+; This affects mb_send_mail() and mbstring.detect_order.
+; https://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; internal/script encoding.
+; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;mbstring.internal_encoding =
+
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; http input encoding.
+; mbstring.encoding_translation = On is needed to use this setting.
+; If empty, default_charset or input_encoding or mbstring.input is used.
+; The precedence is: default_charset < input_encoding < mbstring.http_input
+; https://php.net/mbstring.http-input
+;mbstring.http_input =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; http output encoding.
+; mb_output_handler must be registered as output buffer to function.
+; If empty, default_charset or output_encoding or mbstring.http_output is used.
+; The precedence is: default_charset < output_encoding < mbstring.http_output
+; To use an output encoding conversion, mbstring's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+; https://php.net/mbstring.http-output
+;mbstring.http_output =
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; https://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; "auto" detect order is changed according to mbstring.language
+; https://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; https://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none
+
+; Enable strict encoding detection.
+;mbstring.strict_detection = Off
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetypes=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetypes=
+
+; This directive specifies maximum stack depth for mbstring regular expressions. It is similar
+; to the pcre.recursion_limit for PCRE.
+;mbstring.regex_stack_limit=100000
+
+; This directive specifies maximum retry count for mbstring regular expressions. It is similar
+; to the pcre.backtrack_limit for PCRE.
+;mbstring.regex_retry_limit=1000000
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; https://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 1
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; https://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; https://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; https://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; https://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; https://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; https://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; https://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; https://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; https://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; https://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; https://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[dba]
+;dba.default_handler=
+
+[opcache]
+; Determines if Zend OPCache is enabled
+;opcache.enable=1
+
+; Determines if Zend OPCache is enabled for the CLI version of PHP
+;opcache.enable_cli=0
+
+; The OPcache shared memory storage size.
+;opcache.memory_consumption=128
+
+; The amount of memory for interned strings in Mbytes.
+;opcache.interned_strings_buffer=8
+
+; The maximum number of keys (scripts) in the OPcache hash table.
+; Only numbers between 200 and 1000000 are allowed.
+;opcache.max_accelerated_files=10000
+
+; The maximum percentage of "wasted" memory until a restart is scheduled.
+;opcache.max_wasted_percentage=5
+
+; When this directive is enabled, the OPcache appends the current working
+; directory to the script key, thus eliminating possible collisions between
+; files with the same name (basename). Disabling the directive improves
+; performance, but may break existing applications.
+;opcache.use_cwd=1
+
+; When disabled, you must reset the OPcache manually or restart the
+; webserver for changes to the filesystem to take effect.
+;opcache.validate_timestamps=1
+
+; How often (in seconds) to check file timestamps for changes to the shared
+; memory storage allocation. ("1" means validate once per second, but only
+; once per request. "0" means always validate)
+;opcache.revalidate_freq=2
+
+; Enables or disables file search in include_path optimization
+;opcache.revalidate_path=0
+
+; If disabled, all PHPDoc comments are dropped from the code to reduce the
+; size of the optimized code.
+;opcache.save_comments=1
+
+; If enabled, compilation warnings (including notices and deprecations) will
+; be recorded and replayed each time a file is included. Otherwise, compilation
+; warnings will only be emitted when the file is first cached.
+;opcache.record_warnings=0
+
+; Allow file existence override (file_exists, etc.) performance feature.
+;opcache.enable_file_override=0
+
+; A bitmask, where each bit enables or disables the appropriate OPcache
+; passes
+;opcache.optimization_level=0x7FFFBFFF
+
+;opcache.dups_fix=0
+
+; The location of the OPcache blacklist file (wildcards allowed).
+; Each OPcache blacklist file is a text file that holds the names of files
+; that should not be accelerated. The file format is to add each filename
+; to a new line. The filename may be a full path or just a file prefix
+; (i.e., /var/www/x blacklists all the files and directories in /var/www
+; that start with 'x'). Line starting with a ; are ignored (comments).
+;opcache.blacklist_filename=
+
+; Allows exclusion of large files from being cached. By default all files
+; are cached.
+;opcache.max_file_size=0
+
+; Check the cache checksum each N requests.
+; The default value of "0" means that the checks are disabled.
+;opcache.consistency_checks=0
+
+; How long to wait (in seconds) for a scheduled restart to begin if the cache
+; is not being accessed.
+;opcache.force_restart_timeout=180
+
+; OPcache error_log file name. Empty string assumes "stderr".
+;opcache.error_log=
+
+; All OPcache errors go to the Web server log.
+; By default, only fatal errors (level 0) or errors (level 1) are logged.
+; You can also enable warnings (level 2), info messages (level 3) or
+; debug messages (level 4).
+;opcache.log_verbosity_level=1
+
+; Preferred Shared Memory back-end. Leave empty and let the system decide.
+;opcache.preferred_memory_model=
+
+; Protect the shared memory from unexpected writing during script execution.
+; Useful for internal debugging only.
+;opcache.protect_memory=0
+
+; Allows calling OPcache API functions only from PHP scripts which path is
+; started from specified string. The default "" means no restriction
+;opcache.restrict_api=
+
+; Mapping base of shared memory segments (for Windows only). All the PHP
+; processes have to map shared memory into the same address space. This
+; directive allows to manually fix the "Unable to reattach to base address"
+; errors.
+;opcache.mmap_base=
+
+; Facilitates multiple OPcache instances per user (for Windows only). All PHP
+; processes with the same cache ID and user share an OPcache instance.
+;opcache.cache_id=
+
+; Enables and sets the second level cache directory.
+; It should improve performance when SHM memory is full, at server restart or
+; SHM reset. The default "" disables file based caching.
+;opcache.file_cache=
+
+; Enables or disables opcode caching in shared memory.
+;opcache.file_cache_only=0
+
+; Enables or disables checksum validation when script loaded from file cache.
+;opcache.file_cache_consistency_checks=1
+
+; Implies opcache.file_cache_only=1 for a certain process that failed to
+; reattach to the shared memory (for Windows only). Explicitly enabled file
+; cache is required.
+;opcache.file_cache_fallback=1
+
+; Enables or disables copying of PHP code (text segment) into HUGE PAGES.
+; Under certain circumstances (if only a single global PHP process is
+; started from which all others fork), this can increase performance
+; by a tiny amount because TLB misses are reduced. On the other hand, this
+; delays PHP startup, increases memory usage and degrades performance
+; under memory pressure - use with care.
+; Requires appropriate OS configuration.
+;opcache.huge_code_pages=0
+
+; Validate cached file permissions.
+;opcache.validate_permission=0
+
+; Prevent name collisions in chroot'ed environment.
+;opcache.validate_root=0
+
+; If specified, it produces opcode dumps for debugging different stages of
+; optimizations.
+;opcache.opt_debug_level=0
+
+; Specifies a PHP script that is going to be compiled and executed at server
+; start-up.
+; https://php.net/opcache.preload
+;opcache.preload=
+
+; Preloading code as root is not allowed for security reasons. This directive
+; facilitates to let the preloading to be run as another user.
+; https://php.net/opcache.preload_user
+;opcache.preload_user=
+
+; Prevents caching files that are less than this number of seconds old. It
+; protects from caching of incompletely updated files. In case all file updates
+; on your site are atomic, you may increase performance by setting it to "0".
+;opcache.file_update_protection=2
+
+; Absolute path used to store shared lockfiles (for *nix only).
+;opcache.lockfile_path=/tmp
+
+[curl]
+; A default value for the CURLOPT_CAINFO option. This is required to be an
+; absolute path.
+;curl.cainfo =
+
+[openssl]
+; The location of a Certificate Authority (CA) file on the local filesystem
+; to use when verifying the identity of SSL/TLS peers. Most users should
+; not specify a value for this directive as PHP will attempt to use the
+; OS-managed cert stores in its absence. If specified, this value may still
+; be overridden on a per-stream basis via the "cafile" SSL stream context
+; option.
+;openssl.cafile=
+
+; If openssl.cafile is not specified or if the CA file is not found, the
+; directory pointed to by openssl.capath is searched for a suitable
+; certificate. This value must be a correctly hashed certificate directory.
+; Most users should not specify a value for this directive as PHP will
+; attempt to use the OS-managed cert stores in its absence. If specified,
+; this value may still be overridden on a per-stream basis via the "capath"
+; SSL stream context option.
+;openssl.capath=
+
+[ffi]
+; FFI API restriction. Possible values:
+; "preload" - enabled in CLI scripts and preloaded files (default)
+; "false" - always disabled
+; "true" - always enabled
+;ffi.enable=preload
+
+; List of headers files to preload, wildcard patterns allowed.
+;ffi.preload=
--- /dev/null
+/etc/php/8.2/mods-available/mysqlnd.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/opcache.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/pdo.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/xml.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/calendar.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/ctype.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/dom.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/enchant.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/exif.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/ffi.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/fileinfo.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/ftp.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/gd.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/gettext.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/iconv.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/intl.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/mbstring.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/mysqli.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/pdo_mysql.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/phar.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/posix.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/readline.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/shmop.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/simplexml.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/sockets.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/sysvmsg.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/sysvsem.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/sysvshm.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/tokenizer.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/xmlreader.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/xmlwriter.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/xsl.ini
\ No newline at end of file
--- /dev/null
+/etc/php/8.2/mods-available/zip.ini
\ No newline at end of file
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable.
+; 3. A number of predefined registry keys on Windows
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (usually C:\windows)
+; See the PHP docs for more specific information.
+; https://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; https://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security-conscious applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it is
+; much more verbose when it comes to errors. We recommend using the
+; development version only in development environments, as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+; This is the php.ini-production INI file.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.sid_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+; zend.exception_ignore_args
+; Default Value: Off
+; Development Value: Off
+; Production Value: On
+
+; zend.exception_string_param_max_len
+; Default Value: 15
+; Development Value: 15
+; Production Value: 0
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to an empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; https://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It is
+; generally recommended that <?php and ?> should be used and that this feature
+; should be disabled, as enabling it may result in issues when generating XML
+; documents, however this remains supported for backward compatibility reasons.
+; Note that this directive does not control the <?= shorthand tag, which can be
+; used regardless of this directive.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; https://php.net/short-open-tag
+short_open_tag = Off
+
+; The number of significant digits displayed in floating point numbers.
+; https://php.net/precision
+precision = 14
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; https://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; https://php.net/output-handler
+;output_handler =
+
+; URL rewriter function rewrites URL on the fly by using
+; output buffer. You can set target tags by this configuration.
+; "form" tag is special tag. It will add hidden input tag to pass values.
+; Refer to session.trans_sid_tags for usage.
+; Default Value: "form="
+; Development Value: "form="
+; Production Value: "form="
+;url_rewriter.tags
+
+; URL rewriter will not rewrite absolute URL nor form by default. To enable
+; absolute URL rewrite, allowed hosts must be defined at RUNTIME.
+; Refer to session.trans_sid_hosts for more details.
+; Default Value: ""
+; Development Value: ""
+; Production Value: ""
+;url_rewriter.hosts
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; https://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; https://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; https://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; https://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; The unserialize_max_depth specifies the default depth limit for unserialized
+; structures. Setting the depth limit too high may result in stack overflows
+; during unserialization. The unserialize_max_depth ini setting can be
+; overridden by the max_depth option on individual unserialize() calls.
+; A value of 0 disables the depth limit.
+;unserialize_max_depth = 4096
+
+; When floats & doubles are serialized, store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+; The value is also used for json_encode when encoding double values.
+; If -1 is used, then dtoa mode 0 is used which automatically select the best
+; precision.
+serialize_precision = -1
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+; Note: disables the realpath cache
+; https://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions.
+; It receives a comma-delimited list of function names.
+; https://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes.
+; It receives a comma-delimited list of class names.
+; https://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; https://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; https://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; Note: if open_basedir is set, the cache is disabled
+; https://php.net/realpath-cache-size
+;realpath_cache_size = 4096k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; https://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; https://php.net/zend.enable-gc
+zend.enable_gc = On
+
+; If enabled, scripts may be written in encodings that are incompatible with
+; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
+; encodings. To use this feature, mbstring extension must be enabled.
+;zend.multibyte = Off
+
+; Allows to set the default encoding for the scripts. This value will be used
+; unless "declare(encoding=...)" directive appears at the top of the script.
+; Only affects if zend.multibyte is set.
+;zend.script_encoding =
+
+; Allows to include or exclude arguments from stack traces generated for exceptions.
+; In production, it is recommended to turn this setting on to prohibit the output
+; of sensitive information in stack traces
+; Default Value: Off
+; Development Value: Off
+; Production Value: On
+zend.exception_ignore_args = On
+
+; Allows setting the maximum string length in an argument of a stringified stack trace
+; to a value between 0 and 1000000.
+; This has no effect when zend.exception_ignore_args is enabled.
+; Default Value: 15
+; Development Value: 15
+; Production Value: 0
+; In production, it is recommended to set this to 0 to reduce the output
+; of sensitive information in stack traces.
+zend.exception_string_param_max_len = 0
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; https://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; https://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; https://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; https://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+;max_input_vars = 1000
+
+; How many multipart body parts (combined input variable and file uploads) may
+; be accepted.
+; Default Value: -1 (Sum of max_input_vars and max_file_uploads)
+;max_multipart_body_parts = 1500
+
+; Maximum amount of memory a script may consume
+; https://php.net/memory-limit
+memory_limit = -1
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it is automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL (Show all errors, warnings and notices including coding standards.)
+; E_ALL & ~E_NOTICE (Show all errors, except for notices)
+; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; Default Value: E_ALL
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+; https://php.net/error-reporting
+error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; For production environments, we recommend logging errors rather than
+; sending them to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; https://php.net/display-errors
+display_errors = Off
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. We strongly recommend you set this to 'off'
+; for production servers to avoid leaking configuration details.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; https://php.net/display-startup-errors
+display_startup_errors = Off
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; https://php.net/log-errors
+log_errors = On
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; https://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; https://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This is only effective in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; https://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is off by default.
+;report_zend_debug = 0
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; https://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of formatting the
+; error message as HTML for easier reading. This directive controls whether
+; the error message is formatted as HTML or not.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; https://php.net/html-errors
+;html_errors = On
+
+; If html_errors is set to On *and* docref_root is not empty, then PHP
+; produces clickable error messages that direct to a page describing the error
+; or function causing the error in detail.
+; You can download a copy of the PHP manual from https://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty, in which
+; case no links to documentation are generated.
+; Note: Never use this feature for production boxes.
+; https://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; https://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; https://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; https://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; https://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on Windows).
+;error_log = syslog
+
+; The syslog ident is a string which is prepended to every message logged
+; to syslog. Only used when error_log is set to syslog.
+;syslog.ident = php
+
+; The syslog facility is used to specify what type of program is logging
+; the message. Only used when error_log is set to syslog.
+;syslog.facility = user
+
+; Set this to disable filtering control characters (the default).
+; Some loggers only accept NVT-ASCII, others accept anything that's not
+; control characters. If your logger accepts everything, then no filtering
+; is needed at all.
+; Allowed values are:
+; ascii (all printable ASCII characters and NL)
+; no-ctrl (all characters except control characters)
+; all (all characters)
+; raw (like "all", but messages are not split at newlines)
+; https://php.net/syslog.filter
+;syslog.filter = ascii
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; https://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; https://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. G,P,C,E & S are abbreviations for the following respective super
+; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
+; paid for the registration of these arrays and because ENV is not as commonly
+; used as the others, ENV is not recommended on productions servers. You
+; can still get access to the environment variables through getenv() should you
+; need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; https://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P & C) should be
+; registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive
+; are specified in the same manner as the variables_order directive,
+; EXCEPT one. Leaving this value empty will cause PHP to use the value set
+; in the variables_order directive. It does not mean it will leave the super
+; globals array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; https://php.net/request-order
+request_order = "GP"
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; https://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the ENV, REQUEST and SERVER variables are created when they're
+; first used (Just In Time) instead of when the script starts. If these
+; variables are not used within a script, having this directive on will result
+; in a performance gain. The PHP directive register_argc_argv must be disabled
+; for this directive to have any effect.
+; https://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Whether PHP will read the POST data.
+; This option is enabled by default.
+; Most likely, you won't want to disable this option globally. It causes $_POST
+; and $_FILES to always be empty; the only way you will be able to read the
+; POST data will be through the php://input stream wrapper. This can be useful
+; to proxy requests or to process the POST data in a memory efficient fashion.
+; https://php.net/enable-post-data-reading
+;enable_post_data_reading = Off
+
+; Maximum size of POST data that PHP will accept.
+; Its value may be 0 to disable the limit. It is ignored if POST data reading
+; is disabled through enable_post_data_reading.
+; https://php.net/post-max-size
+post_max_size = 8M
+
+; Automatically add files before PHP document.
+; https://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; https://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a media type using the Content-Type header. To
+; disable this, simply set it to be empty.
+;
+; PHP's built-in default media type is set to text/html.
+; https://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to UTF-8.
+; https://php.net/default-charset
+default_charset = "UTF-8"
+
+; PHP internal character encoding is set to empty.
+; If empty, default_charset is used.
+; https://php.net/internal-encoding
+;internal_encoding =
+
+; PHP input character encoding is set to empty.
+; If empty, default_charset is used.
+; https://php.net/input-encoding
+;input_encoding =
+
+; PHP output character encoding is set to empty.
+; If empty, default_charset is used.
+; See also output_buffer.
+; https://php.net/output-encoding
+;output_encoding =
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+;include_path = ".:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; https://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; https://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; https://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; https://php.net/extension-dir
+;extension_dir = "./"
+; On windows:
+;extension_dir = "ext"
+
+; Directory where the temporary files should be placed.
+; Defaults to the system default (see sys_get_temp_dir)
+;sys_temp_dir = "/tmp"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; https://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; https://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; https://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env =
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; https://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside
+; of the web tree and people will not be able to circumvent .htaccess security.
+;cgi.discard_path=1
+
+; FastCGI under IIS supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; https://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If set to 0, PHP sends Status: header that
+; is supported by Apache. When this option is set to 1, PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; https://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #!
+; (shebang) at the top of the running script. This line might be needed if the
+; script support running both as stand-alone script and via PHP CGI<. PHP in CGI
+; mode skips this line and ignores its content if this directive is turned on.
+; https://php.net/cgi.check-shebang-line
+;cgi.check_shebang_line=1
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; https://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; https://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; https://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; https://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like https:// or ftp://) as files.
+; https://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; https://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; https://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; https://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; https://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename
+;
+; For example:
+;
+; extension=mysqli
+;
+; When the extension library to load is not located in the default extension
+; directory, You may specify an absolute path to the library file:
+;
+; extension=/path/to/extension/mysqli.so
+;
+; Note : The syntax used in previous PHP versions ('extension=<ext>.so' and
+; 'extension='php_<ext>.dll') is supported for legacy reasons and may be
+; deprecated in a future PHP major version. So, when it is possible, please
+; move to the new ('extension=<ext>) syntax.
+;
+; Notes for Windows environments :
+;
+; - Many DLL files are located in the ext/
+; extension folders as well as the separate PECL DLL download.
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=bz2
+
+; The ldap extension must be before curl if OpenSSL 1.0.2 and OpenLDAP is used
+; otherwise it results in segfault when unloading after using SASL.
+; See https://github.com/php/php-src/issues/8620 for more info.
+;extension=ldap
+
+;extension=curl
+;extension=ffi
+;extension=ftp
+;extension=fileinfo
+;extension=gd
+;extension=gettext
+;extension=gmp
+;extension=intl
+;extension=imap
+;extension=mbstring
+;extension=exif ; Must be after mbstring as it depends on it
+;extension=mysqli
+;extension=oci8_12c ; Use with Oracle Database 12c Instant Client
+;extension=oci8_19 ; Use with Oracle Database 19 Instant Client
+;extension=odbc
+;extension=openssl
+;extension=pdo_firebird
+;extension=pdo_mysql
+;extension=pdo_oci
+;extension=pdo_odbc
+;extension=pdo_pgsql
+;extension=pdo_sqlite
+;extension=pgsql
+;extension=shmop
+
+; The MIBS data available in the PHP distribution must be installed.
+; See https://www.php.net/manual/en/snmp.installation.php
+;extension=snmp
+
+;extension=soap
+;extension=sockets
+;extension=sodium
+;extension=sqlite3
+;extension=tidy
+;extension=xsl
+;extension=zip
+
+;zend_extension=opcache
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[CLI Server]
+; Whether the CLI web server uses ANSI color coding in its terminal output.
+cli_server.color = On
+
+[Date]
+; Defines the default timezone used by the date functions
+; https://php.net/date.timezone
+;date.timezone =
+
+; https://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; https://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; https://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.833333
+
+; https://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.833333
+
+[filter]
+; https://php.net/filter.default
+;filter.default = unsafe_raw
+
+; https://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; If empty, default_charset or input_encoding or iconv.input_encoding is used.
+; The precedence is: default_charset < input_encoding < iconv.input_encoding
+;iconv.input_encoding =
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;iconv.internal_encoding =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; If empty, default_charset or output_encoding or iconv.output_encoding is used.
+; The precedence is: default_charset < output_encoding < iconv.output_encoding
+; To use an output encoding conversion, iconv's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+;iconv.output_encoding =
+
+[imap]
+; rsh/ssh logins are disabled by default. Use this INI entry if you want to
+; enable them. Note that the IMAP library does not filter mailbox names before
+; passing them to rsh/ssh command, thus passing untrusted data to this function
+; with rsh/ssh enabled is insecure.
+;imap.enable_insecure_rsh=0
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+;intl.use_exceptions = 0
+
+[sqlite3]
+; Directory pointing to SQLite3 extensions
+; https://php.net/sqlite3.extension-dir
+;sqlite3.extension_dir =
+
+; SQLite defensive mode flag (only available from SQLite 3.26+)
+; When the defensive flag is enabled, language features that allow ordinary
+; SQL to deliberately corrupt the database file are disabled. This forbids
+; writing directly to the schema, shadow tables (eg. FTS data tables), or
+; the sqlite_dbpage virtual table.
+; https://www.sqlite.org/c3ref/c_dbconfig_defensive.html
+; (for older SQLite versions, this flag has no use)
+;sqlite3.defensive = 1
+
+[Pcre]
+; PCRE library backtracking limit.
+; https://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+; PCRE library recursion limit.
+; Please note that if you set this value to a high number you may consume all
+; the available process stack and eventually crash PHP (due to reaching the
+; stack size limit imposed by the Operating System).
+; https://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+; Enables or disables JIT compilation of patterns. This requires the PCRE
+; library to be compiled with JIT support.
+;pcre.jit=1
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; https://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+[Pdo_mysql]
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+pdo_mysql.default_socket=
+
+[Phar]
+; https://php.net/phar.readonly
+;phar.readonly = On
+
+; https://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[mail function]
+; For Win32 only.
+; https://php.net/smtp
+SMTP = localhost
+; https://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; https://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; https://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail().
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = Off
+
+; Use mixed LF and CRLF line separators to keep compatibility with some
+; RFC 2822 non conformant MTA.
+mail.mixed_lf_and_crlf = Off
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+; Log mail to syslog (Event Log on Windows).
+;mail.log = syslog
+
+[ODBC]
+; https://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; https://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; https://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; https://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; https://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; https://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; https://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; https://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; https://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; https://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; https://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; It allows the user to specify a folder where files that can be sent via LOAD DATA
+; LOCAL can exist. It is ignored if mysqli.allow_local_infile is enabled.
+;mysqli.local_infile_directory =
+
+; Allow or prevent persistent links.
+; https://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; https://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; https://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; https://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysqli_connect() (doesn't apply in safe mode).
+; https://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysqli_connect() (doesn't apply in safe mode).
+; https://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; https://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; If this option is enabled, closing a persistent connection will rollback
+; any pending transactions of this connection, before it is put back
+; into the persistent connection pool.
+;mysqli.rollback_on_cached_plink = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+mysqlnd.collect_memory_statistics = Off
+
+; Records communication from all extensions using mysqlnd to the specified log
+; file.
+; https://php.net/mysqlnd.debug
+;mysqlnd.debug =
+
+; Defines which queries will be logged.
+;mysqlnd.log_mask = 0
+
+; Default size of the mysqlnd memory pool, which is used by result sets.
+;mysqlnd.mempool_default_size = 16000
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+;mysqlnd.net_read_buffer_size = 32768
+
+; Timeout for network requests in seconds.
+;mysqlnd.net_read_timeout = 31536000
+
+; SHA-256 Authentication Plugin related. File with the MySQL server public RSA
+; key.
+;mysqlnd.sha256_server_public_key =
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; https://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; https://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; https://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; https://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; https://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables row prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; https://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Tuning: Sets the amount of LOB data that is internally returned from
+; Oracle Database when an Oracle LOB locator is initially retrieved as
+; part of a query. Setting this can improve performance by reducing
+; round-trips.
+; https://php.net/oci8.prefetch-lob-size
+; oci8.prefetch_lob_size = 0
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; https://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; https://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; https://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; https://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; https://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; https://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; https://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; https://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; https://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; https://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if
+; your OS has problems with many files in one directory, and is
+; a more efficient layout for servers that handle many sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; https://php.net/session.save-path
+;session.save_path = "/var/lib/php/sessions"
+
+; Whether to use strict session mode.
+; Strict session mode does not accept an uninitialized session ID, and
+; regenerates the session ID if the browser sends an uninitialized session ID.
+; Strict mode protects applications from session fixation via a session adoption
+; vulnerability. It is disabled by default for maximum compatibility, but
+; enabling it is encouraged.
+; https://wiki.php.net/rfc/strict_sessions
+session.use_strict_mode = 0
+
+; Whether to use cookies.
+; https://php.net/session.use-cookies
+session.use_cookies = 1
+
+; https://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the be-all and end-all of session hijacking defense, but it's a good start.
+; https://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; https://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; https://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; https://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; https://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; https://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it
+; inaccessible to browser scripting languages such as JavaScript.
+; https://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Add SameSite attribute to cookie to help mitigate Cross-Site Request Forgery (CSRF/XSRF)
+; Current valid values are "Strict", "Lax" or "None". When using "None",
+; make sure to include the quotes, as `none` is interpreted like `false` in ini files.
+; https://tools.ietf.org/html/draft-west-first-party-cookies-07
+session.cookie_samesite =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; https://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using gc_probability/gc_divisor,
+; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; https://php.net/session.gc-probability
+session.gc_probability = 0
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using gc_probability/gc_divisor,
+; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
+; For high volume production servers, using a value of 1000 is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; https://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; https://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script is the equivalent of setting
+; session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 -type f | xargs rm
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; https://php.net/session.referer-check
+session.referer_check =
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; https://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; https://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users' security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; https://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Set session ID character length. This value could be between 22 to 256.
+; Shorter length than default is supported only for compatibility reason.
+; Users should use 32 or more chars.
+; https://php.net/session.sid-length
+; Default Value: 32
+; Development Value: 26
+; Production Value: 26
+session.sid_length = 26
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; <form> is special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. <form> tag's action attribute URL will not be modified
+; unless it is specified.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form="
+; Development Value: "a=href,area=href,frame=src,form="
+; Production Value: "a=href,area=href,frame=src,form="
+; https://php.net/url-rewriter.tags
+session.trans_sid_tags = "a=href,area=href,frame=src,form="
+
+; URL rewriter does not rewrite absolute URLs by default.
+; To enable rewrites for absolute paths, target hosts must be specified
+; at RUNTIME. i.e. use ini_set()
+; <form> tags is special. PHP will check action attribute's URL regardless
+; of session.trans_sid_tags setting.
+; If no host is defined, HTTP_HOST will be used for allowed host.
+; Example value: php.net,www.php.net,wiki.php.net
+; Use "," for multiple hosts. No spaces are allowed.
+; Default Value: ""
+; Development Value: ""
+; Production Value: ""
+;session.trans_sid_hosts=""
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; https://php.net/session.hash-bits-per-character
+session.sid_bits_per_character = 5
+
+; Enable upload progress tracking in $_SESSION
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; https://php.net/session.upload-progress.enabled
+;session.upload_progress.enabled = On
+
+; Cleanup the progress information as soon as all POST data has been read
+; (i.e. upload completed).
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; https://php.net/session.upload-progress.cleanup
+;session.upload_progress.cleanup = On
+
+; A prefix used for the upload progress key in $_SESSION
+; Default Value: "upload_progress_"
+; Development Value: "upload_progress_"
+; Production Value: "upload_progress_"
+; https://php.net/session.upload-progress.prefix
+;session.upload_progress.prefix = "upload_progress_"
+
+; The index name (concatenated with the prefix) in $_SESSION
+; containing the upload progress information
+; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; https://php.net/session.upload-progress.name
+;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
+
+; How frequently the upload progress should be updated.
+; Given either in percentages (per-file), or in bytes
+; Default Value: "1%"
+; Development Value: "1%"
+; Production Value: "1%"
+; https://php.net/session.upload-progress.freq
+;session.upload_progress.freq = "1%"
+
+; The minimum delay between updates, in seconds
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; https://php.net/session.upload-progress.min-freq
+;session.upload_progress.min_freq = "1"
+
+; Only write session data when session data is changed. Enabled by default.
+; https://php.net/session.lazy-write
+;session.lazy_write = On
+
+[Assertion]
+; Switch whether to compile assertions at all (to have no overhead at run-time)
+; -1: Do not compile at all
+; 0: Jump over assertion at run-time
+; 1: Execute assertions
+; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1)
+; Default Value: 1
+; Development Value: 1
+; Production Value: -1
+; https://php.net/zend.assertions
+zend.assertions = -1
+
+; Assert(expr); active by default.
+; https://php.net/assert.active
+;assert.active = On
+
+; Throw an AssertionError on failed assertions
+; https://php.net/assert.exception
+;assert.exception = On
+
+; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active)
+; https://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; https://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; https://php.net/assert.callback
+;assert.callback = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; https://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; https://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a component's typelib on com_load()
+; https://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; https://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; https://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+; The version of the .NET framework to use. The value of the setting are the first three parts
+; of the framework's version number, separated by dots, and prefixed with "v", e.g. "v4.0.30319".
+;com.dotnet_version=
+
+[mbstring]
+; language for internal character representation.
+; This affects mb_send_mail() and mbstring.detect_order.
+; https://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; internal/script encoding.
+; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;mbstring.internal_encoding =
+
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; http input encoding.
+; mbstring.encoding_translation = On is needed to use this setting.
+; If empty, default_charset or input_encoding or mbstring.input is used.
+; The precedence is: default_charset < input_encoding < mbstring.http_input
+; https://php.net/mbstring.http-input
+;mbstring.http_input =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; http output encoding.
+; mb_output_handler must be registered as output buffer to function.
+; If empty, default_charset or output_encoding or mbstring.http_output is used.
+; The precedence is: default_charset < output_encoding < mbstring.http_output
+; To use an output encoding conversion, mbstring's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+; https://php.net/mbstring.http-output
+;mbstring.http_output =
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; https://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; "auto" detect order is changed according to mbstring.language
+; https://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; https://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none
+
+; Enable strict encoding detection.
+;mbstring.strict_detection = Off
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetypes=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetypes=
+
+; This directive specifies maximum stack depth for mbstring regular expressions. It is similar
+; to the pcre.recursion_limit for PCRE.
+;mbstring.regex_stack_limit=100000
+
+; This directive specifies maximum retry count for mbstring regular expressions. It is similar
+; to the pcre.backtrack_limit for PCRE.
+;mbstring.regex_retry_limit=1000000
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; https://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 1
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; https://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; https://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; https://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; https://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; https://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; https://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; https://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; https://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; https://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; https://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; https://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[dba]
+;dba.default_handler=
+
+[opcache]
+; Determines if Zend OPCache is enabled
+;opcache.enable=1
+
+; Determines if Zend OPCache is enabled for the CLI version of PHP
+;opcache.enable_cli=0
+
+; The OPcache shared memory storage size.
+;opcache.memory_consumption=128
+
+; The amount of memory for interned strings in Mbytes.
+;opcache.interned_strings_buffer=8
+
+; The maximum number of keys (scripts) in the OPcache hash table.
+; Only numbers between 200 and 1000000 are allowed.
+;opcache.max_accelerated_files=10000
+
+; The maximum percentage of "wasted" memory until a restart is scheduled.
+;opcache.max_wasted_percentage=5
+
+; When this directive is enabled, the OPcache appends the current working
+; directory to the script key, thus eliminating possible collisions between
+; files with the same name (basename). Disabling the directive improves
+; performance, but may break existing applications.
+;opcache.use_cwd=1
+
+; When disabled, you must reset the OPcache manually or restart the
+; webserver for changes to the filesystem to take effect.
+;opcache.validate_timestamps=1
+
+; How often (in seconds) to check file timestamps for changes to the shared
+; memory storage allocation. ("1" means validate once per second, but only
+; once per request. "0" means always validate)
+;opcache.revalidate_freq=2
+
+; Enables or disables file search in include_path optimization
+;opcache.revalidate_path=0
+
+; If disabled, all PHPDoc comments are dropped from the code to reduce the
+; size of the optimized code.
+;opcache.save_comments=1
+
+; If enabled, compilation warnings (including notices and deprecations) will
+; be recorded and replayed each time a file is included. Otherwise, compilation
+; warnings will only be emitted when the file is first cached.
+;opcache.record_warnings=0
+
+; Allow file existence override (file_exists, etc.) performance feature.
+;opcache.enable_file_override=0
+
+; A bitmask, where each bit enables or disables the appropriate OPcache
+; passes
+;opcache.optimization_level=0x7FFFBFFF
+
+;opcache.dups_fix=0
+
+; The location of the OPcache blacklist file (wildcards allowed).
+; Each OPcache blacklist file is a text file that holds the names of files
+; that should not be accelerated. The file format is to add each filename
+; to a new line. The filename may be a full path or just a file prefix
+; (i.e., /var/www/x blacklists all the files and directories in /var/www
+; that start with 'x'). Line starting with a ; are ignored (comments).
+;opcache.blacklist_filename=
+
+; Allows exclusion of large files from being cached. By default all files
+; are cached.
+;opcache.max_file_size=0
+
+; Check the cache checksum each N requests.
+; The default value of "0" means that the checks are disabled.
+;opcache.consistency_checks=0
+
+; How long to wait (in seconds) for a scheduled restart to begin if the cache
+; is not being accessed.
+;opcache.force_restart_timeout=180
+
+; OPcache error_log file name. Empty string assumes "stderr".
+;opcache.error_log=
+
+; All OPcache errors go to the Web server log.
+; By default, only fatal errors (level 0) or errors (level 1) are logged.
+; You can also enable warnings (level 2), info messages (level 3) or
+; debug messages (level 4).
+;opcache.log_verbosity_level=1
+
+; Preferred Shared Memory back-end. Leave empty and let the system decide.
+;opcache.preferred_memory_model=
+
+; Protect the shared memory from unexpected writing during script execution.
+; Useful for internal debugging only.
+;opcache.protect_memory=0
+
+; Allows calling OPcache API functions only from PHP scripts which path is
+; started from specified string. The default "" means no restriction
+;opcache.restrict_api=
+
+; Mapping base of shared memory segments (for Windows only). All the PHP
+; processes have to map shared memory into the same address space. This
+; directive allows to manually fix the "Unable to reattach to base address"
+; errors.
+;opcache.mmap_base=
+
+; Facilitates multiple OPcache instances per user (for Windows only). All PHP
+; processes with the same cache ID and user share an OPcache instance.
+;opcache.cache_id=
+
+; Enables and sets the second level cache directory.
+; It should improve performance when SHM memory is full, at server restart or
+; SHM reset. The default "" disables file based caching.
+;opcache.file_cache=
+
+; Enables or disables opcode caching in shared memory.
+;opcache.file_cache_only=0
+
+; Enables or disables checksum validation when script loaded from file cache.
+;opcache.file_cache_consistency_checks=1
+
+; Implies opcache.file_cache_only=1 for a certain process that failed to
+; reattach to the shared memory (for Windows only). Explicitly enabled file
+; cache is required.
+;opcache.file_cache_fallback=1
+
+; Enables or disables copying of PHP code (text segment) into HUGE PAGES.
+; Under certain circumstances (if only a single global PHP process is
+; started from which all others fork), this can increase performance
+; by a tiny amount because TLB misses are reduced. On the other hand, this
+; delays PHP startup, increases memory usage and degrades performance
+; under memory pressure - use with care.
+; Requires appropriate OS configuration.
+;opcache.huge_code_pages=0
+
+; Validate cached file permissions.
+;opcache.validate_permission=0
+
+; Prevent name collisions in chroot'ed environment.
+;opcache.validate_root=0
+
+; If specified, it produces opcode dumps for debugging different stages of
+; optimizations.
+;opcache.opt_debug_level=0
+
+; Specifies a PHP script that is going to be compiled and executed at server
+; start-up.
+; https://php.net/opcache.preload
+;opcache.preload=
+
+; Preloading code as root is not allowed for security reasons. This directive
+; facilitates to let the preloading to be run as another user.
+; https://php.net/opcache.preload_user
+;opcache.preload_user=
+
+; Prevents caching files that are less than this number of seconds old. It
+; protects from caching of incompletely updated files. In case all file updates
+; on your site are atomic, you may increase performance by setting it to "0".
+;opcache.file_update_protection=2
+
+; Absolute path used to store shared lockfiles (for *nix only).
+;opcache.lockfile_path=/tmp
+
+[curl]
+; A default value for the CURLOPT_CAINFO option. This is required to be an
+; absolute path.
+;curl.cainfo =
+
+[openssl]
+; The location of a Certificate Authority (CA) file on the local filesystem
+; to use when verifying the identity of SSL/TLS peers. Most users should
+; not specify a value for this directive as PHP will attempt to use the
+; OS-managed cert stores in its absence. If specified, this value may still
+; be overridden on a per-stream basis via the "cafile" SSL stream context
+; option.
+;openssl.cafile=
+
+; If openssl.cafile is not specified or if the CA file is not found, the
+; directory pointed to by openssl.capath is searched for a suitable
+; certificate. This value must be a correctly hashed certificate directory.
+; Most users should not specify a value for this directive as PHP will
+; attempt to use the OS-managed cert stores in its absence. If specified,
+; this value may still be overridden on a per-stream basis via the "capath"
+; SSL stream context option.
+;openssl.capath=
+
+[ffi]
+; FFI API restriction. Possible values:
+; "preload" - enabled in CLI scripts and preloaded files (default)
+; "false" - always disabled
+; "true" - always enabled
+;ffi.enable=preload
+
+; List of headers files to preload, wildcard patterns allowed.
+;ffi.preload=
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=calendar.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=ctype.so
--- /dev/null
+; configuration for php xml module
+; priority=20
+extension=dom.so
--- /dev/null
+; configuration for php enchant module
+; priority=20
+extension=enchant.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=exif.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=ffi.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=fileinfo.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=ftp.so
--- /dev/null
+; configuration for php gd module
+; priority=20
+extension=gd.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=gettext.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=iconv.so
--- /dev/null
+; configuration for php intl module
+; priority=20
+extension=intl.so
--- /dev/null
+; configuration for php mbstring module
+; priority=20
+extension=mbstring.so
--- /dev/null
+; configuration for php mysql module
+; priority=20
+extension=mysqli.so
--- /dev/null
+; configuration for php mysql module
+; priority=10
+extension=mysqlnd.so
--- /dev/null
+; configuration for php opcache module
+; priority=10
+zend_extension=opcache.so
+opcache.jit=off
--- /dev/null
+; configuration for php common module
+; priority=10
+extension=pdo.so
--- /dev/null
+; configuration for php mysql module
+; priority=20
+extension=pdo_mysql.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=phar.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=posix.so
--- /dev/null
+; configuration for php readline module
+; priority=20
+extension=readline.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=shmop.so
--- /dev/null
+; configuration for php xml module
+; priority=20
+extension=simplexml.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=sockets.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=sysvmsg.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=sysvsem.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=sysvshm.so
--- /dev/null
+; configuration for php common module
+; priority=20
+extension=tokenizer.so
--- /dev/null
+; configuration for php xml module
+; priority=15
+extension=xml.so
--- /dev/null
+; configuration for php xml module
+; priority=20
+extension=xmlreader.so
--- /dev/null
+; configuration for php xml module
+; priority=20
+extension=xmlwriter.so
--- /dev/null
+; configuration for php xml module
+; priority=20
+extension=xsl.so
--- /dev/null
+; configuration for php zip module
+; priority=20
+extension=zip.so
--- /dev/null
+# Those aliases do not work properly with several hosts on your apache server
+# Uncomment them to use it or adapt them to your configuration
+# Alias /roundcube /var/lib/roundcube/public_html
+
+<Directory /var/lib/roundcube/public_html/>
+ Options +FollowSymLinks
+ # This is needed to parse /var/lib/roundcube/.htaccess. See its
+ # content before setting AllowOverride to None.
+ AllowOverride All
+ <IfVersion >= 2.3>
+ Require all granted
+ </IfVersion>
+ <IfVersion < 2.3>
+ Order allow,deny
+ Allow from all
+ </IfVersion>
+</Directory>
+
+# Protecting basic directories (not needed when the document root is
+# /var/lib/roundcube/public_html):
+<Directory /var/lib/roundcube/config>
+ Options -FollowSymLinks
+ AllowOverride None
+</Directory>
+
+<Directory /var/lib/roundcube/temp>
+ Options -FollowSymLinks
+ AllowOverride None
+ <IfVersion >= 2.3>
+ Require all denied
+ </IfVersion>
+ <IfVersion < 2.3>
+ Order allow,deny
+ Deny from all
+ </IfVersion>
+</Directory>
+
+<Directory /var/lib/roundcube/logs>
+ Options -FollowSymLinks
+ AllowOverride None
+ <IfVersion >= 2.3>
+ Require all denied
+ </IfVersion>
+ <IfVersion < 2.3>
+ Order allow,deny
+ Deny from all
+ </IfVersion>
+</Directory>
--- /dev/null
+<?php
+
+/*
+ +-----------------------------------------------------------------------+
+ | Local configuration for the Roundcube Webmail installation. |
+ | |
+ | This is a sample configuration file only containing the minimum |
+ | setup required for a functional installation. Copy more options |
+ | from defaults.inc.php to this file to override the defaults. |
+ | |
+ | This file is part of the Roundcube Webmail client |
+ | Copyright (C) The Roundcube Dev Team |
+ | |
+ | Licensed under the GNU General Public License version 3 or |
+ | any later version with exceptions for skins & plugins. |
+ | See the README file for a full license statement. |
+ +-----------------------------------------------------------------------+
+*/
+
+$config = [];
+
+// Do not set db_dsnw here, use dpkg-reconfigure roundcube-core to configure database!
+include("/etc/roundcube/debian-db-roundcube.php");
+
+// IMAP host chosen to perform the log-in.
+// See defaults.inc.php for the option description.
+$config['imap_host'] = ["localhost:143"];
+
+// SMTP server host (for sending mails).
+// See defaults.inc.php for the option description.
+$config['smtp_host'] = 'localhost:587';
+
+// SMTP username (if required) if you use %u as the username Roundcube
+// will use the current username for login
+$config['smtp_user'] = '%u';
+
+// SMTP password (if required) if you use %p as the password Roundcube
+// will use the current user's password for login
+$config['smtp_pass'] = '%p';
+
+// provide an URL where a user can get support for this Roundcube installation
+// PLEASE DO NOT LINK TO THE ROUNDCUBE.NET WEBSITE HERE!
+$config['support_url'] = '';
+
+// Name your service. This is displayed on the login screen and in the window title
+$config['product_name'] = 'Roundcube Webmail';
+
+// This key is used to encrypt the users imap password which is stored
+// in the session record. For the default cipher method it must be
+// exactly 24 characters long.
+// YOUR KEY MUST BE DIFFERENT THAN THE SAMPLE VALUE FOR SECURITY REASONS
+$config['des_key'] = 'DklwX5GsnolWEAv5fH70+6uZ';
+
+// List of active plugins (in plugins/ directory)
+// Debian: install roundcube-plugins first to have any
+$config['plugins'] = [
+ // 'archive',
+ // 'zipdownload',
+];
+
+// skin name: folder from skins/
+$config['skin'] = 'elastic';
+
+// Disable spellchecking
+// Debian: spellchecking needs additional packages to be installed, or calling external APIs
+// see defaults.inc.php for additional informations
+$config['enable_spellcheck'] = false;
--- /dev/null
+<?php
+require("/etc/roundcube/debian-db.php");
+
+switch ($dbtype) {
+ case "sqlite":
+ case "sqlite3":
+ $config['db_dsnw'] = "sqlite:///$basepath/$dbname?mode=0640";
+ break;
+ default:
+ if ($dbport != '') $dbport=":$dbport";
+ if ($dbserver == '') $dbserver="localhost";
+ $config['db_dsnw'] = "$dbtype://$dbuser:$dbpass@$dbserver$dbport/$dbname";
+ break;
+ }
+?>
--- /dev/null
+<?php
+
+// ---------------------------------------------------------------------
+// WARNING: Do not edit this file! Copy configuration to config.inc.php.
+// ---------------------------------------------------------------------
+
+/*
+ +-----------------------------------------------------------------------+
+ | Default settings for all configuration options |
+ | |
+ | This file is part of the Roundcube Webmail client |
+ | Copyright (C) The Roundcube Dev Team |
+ | |
+ | Licensed under the GNU General Public License version 3 or |
+ | any later version with exceptions for skins & plugins. |
+ | See the README file for a full license statement. |
+ +-----------------------------------------------------------------------+
+*/
+
+$config = [];
+
+// ----------------------------------
+// SQL DATABASE
+// ----------------------------------
+
+// Database connection string (DSN) for read+write operations
+// Format (compatible with PEAR MDB2): db_provider://user:password@host/database
+// Currently supported db_providers: mysql, pgsql, sqlite, mssql, sqlsrv, oracle
+// For examples see http://pear.php.net/manual/en/package.database.mdb2.intro-dsn.php
+// Note: for SQLite use absolute path (Linux): 'sqlite:////full/path/to/sqlite.db?mode=0646'
+// or (Windows): 'sqlite:///C:/full/path/to/sqlite.db'
+// Note: Various drivers support various additional arguments for connection,
+// for Mysql: key, cipher, cert, capath, ca, verify_server_cert,
+// for Postgres: application_name, sslmode, sslcert, sslkey, sslrootcert, sslcrl, sslcompression, service.
+// e.g. 'mysql://roundcube:@localhost/roundcubemail?verify_server_cert=false'
+$config['db_dsnw'] = 'mysql://roundcube:@localhost/roundcubemail';
+
+// Database DSN for read-only operations (if empty write database will be used)
+// useful for database replication
+$config['db_dsnr'] = '';
+
+// Disable the use of already established dsnw connections for subsequent reads
+$config['db_dsnw_noread'] = false;
+
+// use persistent db-connections
+// beware this will not "always" work as expected
+// see: http://www.php.net/manual/en/features.persistent-connections.php
+$config['db_persistent'] = false;
+
+// you can define specific table (and sequence) names prefix
+$config['db_prefix'] = '';
+
+// Mapping of table names and connections to use for ALL operations.
+// This can be used in a setup with replicated databases and a DB master
+// where read/write access to cache tables should not go to master.
+$config['db_table_dsn'] = [
+// 'cache' => 'r',
+// 'cache_index' => 'r',
+// 'cache_thread' => 'r',
+// 'cache_messages' => 'r',
+];
+
+// It is possible to specify database variable values e.g. some limits here.
+// Use them if your server is not MySQL or for better performance.
+// For example Roundcube uses max_allowed_packet value (in bytes)
+// which limits query size for database cache operations.
+$config['db_max_allowed_packet'] = null;
+
+
+// ----------------------------------
+// LOGGING/DEBUGGING
+// ----------------------------------
+
+// log driver: 'syslog', 'stdout' or 'file'.
+$config['log_driver'] = 'file';
+
+// date format for log entries
+// (read http://php.net/manual/en/function.date.php for all format characters)
+$config['log_date_format'] = 'd-M-Y H:i:s O';
+
+// length of the session ID to prepend each log line with
+// set to 0 to avoid session IDs being logged.
+$config['log_session_id'] = 8;
+
+// Default extension used for log file name
+$config['log_file_ext'] = '.log';
+
+// Syslog ident string to use, if using the 'syslog' log driver.
+$config['syslog_id'] = 'roundcube';
+
+// Syslog facility to use, if using the 'syslog' log driver.
+// For possible values see installer or http://php.net/manual/en/function.openlog.php
+$config['syslog_facility'] = LOG_USER;
+
+// Activate this option if logs should be written to per-user directories.
+// Data will only be logged if a directory <log_dir>/<username>/ exists and is writable.
+$config['per_user_logging'] = false;
+
+// Log sent messages to <log_dir>/sendmail.log or to syslog
+$config['smtp_log'] = true;
+
+// Log successful/failed logins to <log_dir>/userlogins.log or to syslog
+$config['log_logins'] = false;
+
+// Log session debug information/authentication errors to <log_dir>/session.log or to syslog
+$config['session_debug'] = false;
+
+// Log SQL queries to <log_dir>/sql.log or to syslog
+$config['sql_debug'] = false;
+
+// Log IMAP conversation to <log_dir>/imap.log or to syslog
+$config['imap_debug'] = false;
+
+// Log LDAP conversation to <log_dir>/ldap.log or to syslog
+$config['ldap_debug'] = false;
+
+// Log SMTP conversation to <log_dir>/smtp.log or to syslog
+$config['smtp_debug'] = false;
+
+// Log Memcache conversation to <log_dir>/memcache.log or to syslog
+$config['memcache_debug'] = false;
+
+// Log APC conversation to <log_dir>/apc.log or to syslog
+$config['apc_debug'] = false;
+
+// Log Redis conversation to <log_dir>/redis.log or to syslog
+$config['redis_debug'] = false;
+
+
+// ----------------------------------
+// IMAP
+// ----------------------------------
+
+// The IMAP host (and optionally port number) chosen to perform the log-in.
+// Leave blank to show a textbox at login, give a list of hosts
+// to display a pulldown menu or set one host as string.
+// Enter hostname with prefix ssl:// to use Implicit TLS, or use
+// prefix tls:// to use STARTTLS.
+// If port number is omitted it will be set to 993 (for ssl://) or 143 otherwise.
+// Supported replacement variables:
+// %n - hostname ($_SERVER['SERVER_NAME'])
+// %t - hostname without the first part
+// %d - domain (http hostname $_SERVER['HTTP_HOST'] without the first part)
+// %s - domain name after the '@' from e-mail address provided at login screen
+// For example %n = mail.domain.tld, %t = domain.tld
+// WARNING: After hostname change update of mail_host column in users table is
+// required to match old user data records with the new host.
+$config['imap_host'] = 'localhost:143';
+
+// IMAP authentication method (DIGEST-MD5, CRAM-MD5, LOGIN, PLAIN or null).
+// Use 'IMAP' to authenticate with IMAP LOGIN command.
+// By default the most secure method (from supported) will be selected.
+$config['imap_auth_type'] = null;
+
+// IMAP socket context options
+// See http://php.net/manual/en/context.ssl.php
+// The example below enables server certificate validation
+//$config['imap_conn_options'] = [
+// 'ssl' => [
+// 'verify_peer' => true,
+// 'verify_depth' => 3,
+// 'cafile' => '/etc/openssl/certs/ca.crt',
+// ],
+// ];
+// Note: These can be also specified as an array of options indexed by hostname
+$config['imap_conn_options'] = null;
+
+// IMAP connection timeout, in seconds. Default: 0 (use default_socket_timeout)
+$config['imap_timeout'] = 0;
+
+// Optional IMAP authentication identifier to be used as authorization proxy
+$config['imap_auth_cid'] = null;
+
+// Optional IMAP authentication password to be used for imap_auth_cid
+$config['imap_auth_pw'] = null;
+
+// If you know your imap's folder delimiter, you can specify it here.
+// Otherwise it will be determined automatically
+$config['imap_delimiter'] = null;
+
+// If you know your imap's folder vendor, you can specify it here.
+// Otherwise it will be determined automatically. Use lower-case
+// identifiers, e.g. 'dovecot', 'cyrus', 'gimap', 'hmail', 'uw-imap'.
+$config['imap_vendor'] = null;
+
+// If IMAP server doesn't support NAMESPACE extension, but you're
+// using shared folders or personal root folder is non-empty, you'll need to
+// set these options. All can be strings or arrays of strings.
+// Note: Folders need to be ended with directory separator, e.g. "INBOX."
+// (special directory "~" is an exception to this rule)
+// Note: These can be used also to overwrite server's namespaces
+// Note: Set these to FALSE to disable access to specified namespace
+$config['imap_ns_personal'] = null;
+$config['imap_ns_other'] = null;
+$config['imap_ns_shared'] = null;
+
+// By default IMAP capabilities are read after connection to IMAP server
+// In some cases, e.g. when using IMAP proxy, there's a need to refresh the list
+// after login. Set to True if you've got this case.
+$config['imap_force_caps'] = false;
+
+// By default list of subscribed folders is determined using LIST-EXTENDED
+// extension if available. Some servers (dovecot 1.x) returns wrong results
+// for shared namespaces in this case. https://github.com/roundcube/roundcubemail/issues/2474
+// Enable this option to force LSUB command usage instead.
+// Deprecated: Use imap_disabled_caps = ['LIST-EXTENDED']
+$config['imap_force_lsub'] = false;
+
+// Some server configurations (e.g. Courier) doesn't list folders in all namespaces
+// Enable this option to force listing of folders in all namespaces
+$config['imap_force_ns'] = false;
+
+// Some servers return hidden folders (name starting with a dot)
+// from user home directory. IMAP RFC does not forbid that.
+// Enable this option to hide them and disable possibility to create such.
+$config['imap_skip_hidden_folders'] = false;
+
+// Some servers do not support folders with both folders and messages inside
+// If your server supports that use true, if it does not, use false.
+// By default it will be determined automatically (once per user session).
+$config['imap_dual_use_folders'] = null;
+
+// List of disabled imap extensions.
+// Use if your IMAP server has broken implementation of some feature
+// and you can't remove it from CAPABILITY string on server-side.
+// For example UW-IMAP server has broken ESEARCH.
+// Note: Because the list is cached, re-login is required after change.
+$config['imap_disabled_caps'] = [];
+
+// Log IMAP session identifiers after each IMAP login.
+// This is used to relate IMAP session with Roundcube user sessions
+$config['imap_log_session'] = false;
+
+// Type of IMAP indexes cache. Supported values: 'db', 'apc' and 'memcache' or 'memcached'.
+$config['imap_cache'] = null;
+
+// Enables messages cache. Only 'db' cache is supported.
+// This requires an IMAP server that supports QRESYNC and CONDSTORE
+// extensions (RFC7162). See synchronize() in program/lib/Roundcube/rcube_imap_cache.php
+// for further info, or if you experience syncing problems.
+$config['messages_cache'] = false;
+
+// Lifetime of IMAP indexes cache. Possible units: s, m, h, d, w
+$config['imap_cache_ttl'] = '10d';
+
+// Lifetime of messages cache. Possible units: s, m, h, d, w
+$config['messages_cache_ttl'] = '10d';
+
+// Maximum cached message size in kilobytes.
+// Note: On MySQL this should be less than (max_allowed_packet - 30%)
+$config['messages_cache_threshold'] = 50;
+
+
+// ----------------------------------
+// SMTP
+// ----------------------------------
+
+// SMTP server host (and optional port number) for sending mails.
+// Enter hostname with prefix ssl:// to use Implicit TLS, or use
+// prefix tls:// to use STARTTLS.
+// If port number is omitted it will be set to 465 (for ssl://) or 587 otherwise.
+// Supported replacement variables:
+// %h - user's IMAP hostname
+// %n - hostname ($_SERVER['SERVER_NAME'])
+// %t - hostname without the first part
+// %d - domain (http hostname $_SERVER['HTTP_HOST'] without the first part)
+// %z - IMAP domain (IMAP hostname without the first part)
+// For example %n = mail.domain.tld, %t = domain.tld
+// To specify different SMTP servers for different IMAP hosts provide an array
+// of IMAP host (no prefix or port) and SMTP server e.g. ['imap.example.com' => 'smtp.example.net']
+$config['smtp_host'] = 'localhost:587';
+
+// SMTP username (if required)
+// Note: %u variable will be replaced with current user's username
+$config['smtp_user'] = '%u';
+
+// SMTP password (if required)
+// Note: When set to '%p' current user's password will be used
+$config['smtp_pass'] = '%p';
+
+// SMTP AUTH type (DIGEST-MD5, CRAM-MD5, LOGIN, PLAIN or empty to use
+// best server supported one)
+$config['smtp_auth_type'] = null;
+
+// Optional SMTP authentication identifier to be used as authorization proxy
+$config['smtp_auth_cid'] = null;
+
+// Optional SMTP authentication password to be used for smtp_auth_cid
+$config['smtp_auth_pw'] = null;
+
+// Pass the username (XCLIENT LOGIN) to the server
+$config['smtp_xclient_login'] = false;
+
+// Pass the remote IP (XCLIENT ADDR) to the server
+$config['smtp_xclient_addr'] = false;
+
+
+// SMTP HELO host
+// Hostname to give to the remote server for SMTP 'HELO' or 'EHLO' messages
+// Leave this blank and you will get the server variable 'server_name' or
+// localhost if that isn't defined.
+$config['smtp_helo_host'] = '';
+
+// SMTP connection timeout, in seconds. Default: 0 (use default_socket_timeout)
+// Note: There's a known issue where using ssl connection with
+// timeout > 0 causes connection errors (https://bugs.php.net/bug.php?id=54511)
+$config['smtp_timeout'] = 0;
+
+// SMTP socket context options
+// See http://php.net/manual/en/context.ssl.php
+// The example below enables server certificate validation, and
+// requires 'smtp_timeout' to be non zero.
+// $config['smtp_conn_options'] = [
+// 'ssl' => [
+// 'verify_peer' => true,
+// 'verify_depth' => 3,
+// 'cafile' => '/etc/openssl/certs/ca.crt',
+// ],
+// ];
+// Note: These can be also specified as an array of options indexed by hostname
+$config['smtp_conn_options'] = null;
+
+
+// ----------------------------------
+// OAuth
+// ----------------------------------
+
+// Enable OAuth2 by defining a provider. Use 'generic' here
+$config['oauth_provider'] = null;
+
+// Provider name to be displayed on the login button
+$config['oauth_provider_name'] = 'Google';
+
+// Mandatory: OAuth client ID for your Roundcube installation
+$config['oauth_client_id'] = null;
+
+// Mandatory: OAuth client secret
+$config['oauth_client_secret'] = null;
+
+// Mandatory: URI for OAuth user authentication (redirect)
+$config['oauth_auth_uri'] = null;
+
+// Mandatory: Endpoint for OAuth authentication requests (server-to-server)
+$config['oauth_token_uri'] = null;
+
+// Optional: Endpoint to query user identity if not provided in auth response
+$config['oauth_identity_uri'] = null;
+
+// Optional: disable SSL certificate check on HTTP requests to OAuth server
+// See http://docs.guzzlephp.org/en/stable/request-options.html#verify for possible values
+$config['oauth_verify_peer'] = true;
+
+// Mandatory: OAuth scopes to request (space-separated string)
+$config['oauth_scope'] = null;
+
+// Optional: additional query parameters to send with login request (hash array)
+$config['oauth_auth_parameters'] = [];
+
+// Optional: array of field names used to resolve the username within the identity information
+$config['oauth_identity_fields'] = null;
+
+// Boolean: automatically redirect to OAuth login when opening Roundcube without a valid session
+$config['oauth_login_redirect'] = false;
+
+///// Example config for Gmail
+
+// Register your service at https://console.developers.google.com/
+// - use https://<your-roundcube-url>/index.php/login/oauth as redirect URL
+
+// $config['default_host'] = 'ssl://imap.gmail.com';
+// $config['oauth_provider'] = 'google';
+// $config['oauth_provider_name'] = 'Google';
+// $config['oauth_client_id'] = "<your-credentials-client-id>";
+// $config['oauth_client_secret'] = "<your-credentials-client-secret>";
+// $config['oauth_auth_uri'] = "https://accounts.google.com/o/oauth2/auth";
+// $config['oauth_token_uri'] = "https://oauth2.googleapis.com/token";
+// $config['oauth_identity_uri'] = 'https://www.googleapis.com/oauth2/v1/userinfo';
+// $config['oauth_scope'] = "email profile openid https://mail.google.com/";
+// $config['oauth_auth_parameters'] = ['access_type' => 'offline', 'prompt' => 'consent'];
+
+///// Example config for Outlook.com (Office 365)
+
+// Register your OAuth client at https://portal.azure.com
+// - use https://<your-roundcube-url>/index.php/login/oauth as redirect URL
+// - grant permissions to Microsoft Graph API "IMAP.AccessAsUser.All", "SMTP.Send", "User.Read" and "offline_access"
+
+// $config['imap_host'] = 'ssl://outlook.office365.com';
+// $config['smtp_host'] = 'ssl://smtp.office365.com';
+
+// $config['oauth_provider'] = 'outlook';
+// $config['oauth_provider_name'] = 'Outlook.com';
+// $config['oauth_client_id'] = "<your-credentials-client-id>";
+// $config['oauth_client_secret'] = "<your-credentials-client-secret>";
+// $config['oauth_auth_uri'] = "https://login.microsoftonline.com/common/oauth2/v2.0/authorize";
+// $config['oauth_token_uri'] = "https://login.microsoftonline.com/common/oauth2/v2.0/token";
+// $config['oauth_identity_uri'] = "https://graph.microsoft.com/v1.0/me";
+// $config['oauth_identity_fields'] = ['email', 'userPrincipalName'];
+// $config['oauth_scope'] = "https://outlook.office365.com/IMAP.AccessAsUser.All https://outlook.office365.com/SMTP.Send User.Read offline_access";
+// $config['oauth_auth_parameters'] = ['nonce' => mt_rand()];
+
+// ----------------------------------
+// LDAP
+// ----------------------------------
+
+// Type of LDAP cache. Supported values: 'db', 'apc' and 'memcache' or 'memcached'.
+$config['ldap_cache'] = 'db';
+
+// Lifetime of LDAP cache. Possible units: s, m, h, d, w
+$config['ldap_cache_ttl'] = '10m';
+
+
+// ----------------------------------
+// CACHE(S)
+// ----------------------------------
+
+// Use these hosts for accessing memcached
+// Define any number of hosts in the form of hostname:port or unix:///path/to/socket.file
+// Example: ['localhost:11211', '192.168.1.12:11211', 'unix:///var/tmp/memcached.sock'];
+$config['memcache_hosts'] = null;
+
+// Controls the use of a persistent connections to memcache servers
+// See http://php.net/manual/en/memcache.addserver.php
+$config['memcache_pconnect'] = true;
+
+// Value in seconds which will be used for connecting to the daemon
+// See http://php.net/manual/en/memcache.addserver.php
+$config['memcache_timeout'] = 1;
+
+// Controls how often a failed server will be retried (value in seconds).
+// Setting this parameter to -1 disables automatic retry.
+// See http://php.net/manual/en/memcache.addserver.php
+$config['memcache_retry_interval'] = 15;
+
+// Use these hosts for accessing Redis.
+// Currently only one host is supported. Cluster support may come in a future release.
+// You can pass 4 fields, host, port (optional), database (optional) and password (optional).
+// Unset fields will be set to the default values host=127.0.0.1, port=6379.
+// Examples:
+// ['localhost:6379'];
+// ['192.168.1.1:6379:1:secret'];
+// ['unix:///var/run/redis/redis-server.sock:1:secret'];
+$config['redis_hosts'] = null;
+
+// Maximum size of an object in memcache (in bytes). Default: 2MB
+$config['memcache_max_allowed_packet'] = '2M';
+
+// Maximum size of an object in APC cache (in bytes). Default: 2MB
+$config['apc_max_allowed_packet'] = '2M';
+
+// Maximum size of an object in Redis cache (in bytes). Default: 2MB
+$config['redis_max_allowed_packet'] = '2M';
+
+
+// ----------------------------------
+// SYSTEM
+// ----------------------------------
+
+// THIS OPTION WILL ALLOW THE INSTALLER TO RUN AND CAN EXPOSE SENSITIVE CONFIG DATA.
+// ONLY ENABLE IT IF YOU'RE REALLY SURE WHAT YOU'RE DOING!
+$config['enable_installer'] = false;
+
+// don't allow these settings to be overridden by the user
+$config['dont_override'] = [];
+
+// List of disabled UI elements/actions
+$config['disabled_actions'] = [];
+
+// define which settings should be listed under the 'advanced' block
+// which is hidden by default
+$config['advanced_prefs'] = [];
+
+// provide an URL where a user can get support for this Roundcube installation
+// PLEASE DO NOT LINK TO THE ROUNDCUBE.NET WEBSITE HERE!
+$config['support_url'] = '';
+
+// Location of the blank (watermark) frame page. By default it is the watermark.html
+// file from the currently selected skin. Prepend name/path with a slash to use
+// current skin folder. Remove the slash to point to a file in the Roundcube
+// root directory. It can be also a full URL.
+$config['blankpage_url'] = '/watermark.html';
+
+// Logo image replacement. Specifies location of the image as:
+// - URL relative to the document root of this Roundcube installation
+// - full URL with http:// or https:// prefix
+// - URL relative to the current skin folder (when starts with a '/')
+//
+// An array can be used to specify different logos for specific template files
+// The array key specifies the place(s) the logo should be applied to and
+// is made up of (up to) 3 parts:
+// - skin name prefix (always with colon, can be replaced with *)
+// - template name (or * for all templates)
+// - logo type - it is used for logos used on multiple templates and the available types include:
+// '[favicon]' for favicon
+// '[print]' for logo on all print templates (e.g. messageprint, contactprint)
+// '[small]' for small screen logo in supported skins
+// '[dark]' and '[small-dark]' for dark mode logo in supported skins
+// '[link]' for adding a URL link to the logo image
+//
+// Example config for skin_logo
+/*
+ [
+ // show the image /images/logo_login_small.png for the Login screen in the Elastic skin on small screens
+ "elastic:login[small]" => "/images/logo_login_small.png",
+ // show the image /images/logo_login.png for the Login screen in the Elastic skin
+ "elastic:login" => "/images/logo_login.png",
+ // add a link to the logo on the Login screen in the Elastic skin
+ "elastic:login[link]" => "https://www.example.com",
+ // add a link to the logo on all screens in the Elastic skin
+ "elastic:*[link]" => "https://www.example.com",
+ // add a link to the logo on all screens for all skins
+ "[link]" => "https://www.example.com",
+ // show the image /images/logo_small.png in the Elastic skin
+ "elastic:*[small]" => "/images/logo_small.png",
+ // show the image /images/larry.png in the Larry skin
+ "larry:*" => "/images/larry.png",
+ // show the image /images/logo_login.png on the login template in all skins
+ "login" => "/images/logo_login.png",
+ // show the image /images/logo_print.png for all print type logos in all skins
+ "[print]" => "/images/logo_print.png",
+ ];
+*/
+$config['skin_logo'] = null;
+
+// Automatically register user in Roundcube database on successful (IMAP) logon.
+// Set to false if only registered users should be allowed to the webmail.
+// Note: If disabled you have to create records in Roundcube users table by yourself.
+// Note: Roundcube does not manage/create users on a mail server.
+$config['auto_create_user'] = true;
+
+// Enables possibility to log in using email address from user identities
+$config['user_aliases'] = false;
+
+// use this folder to store log files
+// must be writeable for the user who runs PHP process (Apache user if mod_php is being used)
+// This is used by the 'file' log driver.
+$config['log_dir'] = RCUBE_INSTALL_PATH . 'logs/';
+
+// Location of temporary saved files such as attachments and cache files
+// must be writeable for the user who runs PHP process (Apache user if mod_php is being used)
+$config['temp_dir'] = RCUBE_INSTALL_PATH . 'temp/';
+
+// expire files in temp_dir after 48 hours
+// possible units: s, m, h, d, w
+$config['temp_dir_ttl'] = '48h';
+
+// Enforce connections over https
+// With this option enabled, all non-secure connections will be redirected.
+// It can be also a port number, hostname or hostname:port if they are
+// different than default HTTP_HOST:443
+$config['force_https'] = false;
+
+// tell PHP that it should work as under secure connection
+// even if it doesn't recognize it as secure ($_SERVER['HTTPS'] is not set)
+// e.g. when you're running Roundcube behind a https proxy
+// this option is mutually exclusive to 'force_https' and only either one of them should be set to true.
+$config['use_https'] = false;
+
+// Allow browser-autocompletion on login form.
+// 0 - disabled, 1 - username and host only, 2 - username, host, password
+$config['login_autocomplete'] = 0;
+
+// Forces conversion of logins to lower case.
+// 0 - disabled, 1 - only domain part, 2 - domain and local part.
+// If users authentication is case-insensitive this must be enabled.
+// Note: After enabling it all user records need to be updated, e.g. with query:
+// UPDATE users SET username = LOWER(username);
+$config['login_lc'] = 2;
+
+// Maximum length (in bytes) of logon username and password.
+$config['login_username_maxlen'] = 1024;
+$config['login_password_maxlen'] = 1024;
+
+// Logon username filter. Regular expression for use with preg_match().
+// Use special value 'email' if you accept only full email addresses as user logins.
+// Example: '/^[a-z0-9_@.-]+$/'
+$config['login_username_filter'] = null;
+
+// Brute-force attacks prevention.
+// The value specifies maximum number of failed logon attempts per minute.
+$config['login_rate_limit'] = 3;
+
+// Includes should be interpreted as PHP files
+$config['skin_include_php'] = false;
+
+// display product name and software version on login screen
+// 0 - hide product name and version number, 1 - show product name only, 2 - show product name and version number
+$config['display_product_info'] = 1;
+
+// Session lifetime in minutes
+$config['session_lifetime'] = 10;
+
+// Session domain: .example.org
+$config['session_domain'] = '';
+
+// Session name. Default: 'roundcube_sessid'
+$config['session_name'] = null;
+
+// Session authentication cookie name. Default: 'roundcube_sessauth'
+$config['session_auth_name'] = null;
+
+// Session path. Defaults to PHP session.cookie_path setting.
+$config['session_path'] = null;
+
+// Session samesite. Defaults to PHP session.cookie_samesite setting.
+// Requires PHP >= 7.3.0, see https://wiki.php.net/rfc/same-site-cookie for more info
+// Possible values: null (default), 'Lax', or 'Strict'
+$config['session_samesite'] = null;
+
+// Backend to use for session storage. Can either be 'db' (default), 'redis', 'memcache', or 'php'
+//
+// If set to 'memcache' or 'memcached', a list of servers need to be specified in 'memcache_hosts'
+// Make sure the Memcache extension (https://pecl.php.net/package/memcache) version >= 2.0.0
+// or the Memcached extension (https://pecl.php.net/package/memcached) version >= 2.0.0 is installed.
+//
+// If set to 'redis', a server needs to be specified in 'redis_hosts'
+// Make sure the Redis extension (https://pecl.php.net/package/redis) version >= 2.0.0 is installed.
+//
+// Setting this value to 'php' will use the default session save handler configured in PHP
+$config['session_storage'] = 'db';
+
+// List of trusted proxies
+// X_FORWARDED_* and X_REAL_IP headers are only accepted from these IPs
+$config['proxy_whitelist'] = [];
+
+// List of trusted host names
+// Attackers can modify Host header of the HTTP request causing $_SERVER['SERVER_NAME']
+// or $_SERVER['HTTP_HOST'] variables pointing to a different host, that could be used
+// to collect user names and passwords. Some server configurations prevent that, but not all.
+// An empty list accepts any host name. The list can contain host names
+// or PCRE patterns (without // delimiters, that will be added automatically).
+$config['trusted_host_patterns'] = [];
+
+// check client IP in session authorization
+$config['ip_check'] = false;
+
+// X-Frame-Options HTTP header value sent to prevent from Clickjacking.
+// Possible values: sameorigin|deny|allow-from <uri>.
+// Set to false in order to disable sending the header.
+$config['x_frame_options'] = 'sameorigin';
+
+// This key is used for encrypting purposes, like storing of imap password
+// in the session. For historical reasons it's called DES_key, but it's used
+// with any configured cipher_method (see below).
+// For the default cipher_method a required key length is 24 characters.
+$config['des_key'] = 'rcmail-!24ByteDESkey*Str';
+
+// Encryption algorithm. You can use any method supported by OpenSSL.
+// Default is set for backward compatibility to DES-EDE3-CBC,
+// but you can choose e.g. AES-256-CBC which we consider a better choice.
+$config['cipher_method'] = 'DES-EDE3-CBC';
+
+// Automatically add this domain to user names for login
+// Only for IMAP servers that require full e-mail addresses for login
+// Specify an array with 'host' => 'domain' values to support multiple hosts
+// Supported replacement variables:
+// %h - user's IMAP hostname
+// %n - hostname ($_SERVER['SERVER_NAME'])
+// %t - hostname without the first part
+// %d - domain (http hostname $_SERVER['HTTP_HOST'] without the first part)
+// %z - IMAP domain (IMAP hostname without the first part)
+// For example %n = mail.domain.tld, %t = domain.tld
+$config['username_domain'] = '';
+
+// Force domain configured in username_domain to be used for login.
+// Any domain in username will be replaced by username_domain.
+$config['username_domain_forced'] = false;
+
+// This domain will be used to form e-mail addresses of new users
+// Specify an array with 'host' => 'domain' values to support multiple hosts
+// Supported replacement variables:
+// %h - user's IMAP hostname
+// %n - http hostname ($_SERVER['SERVER_NAME'])
+// %d - domain (http hostname without the first part)
+// %z - IMAP domain (IMAP hostname without the first part)
+// For example %n = mail.domain.tld, %t = domain.tld
+$config['mail_domain'] = '';
+
+// Password character set, to change the password for user
+// authentication or for password change operations
+$config['password_charset'] = 'UTF-8';
+
+// How many seconds must pass between emails sent by a user
+$config['sendmail_delay'] = 0;
+
+// Message size limit. Note that SMTP server(s) may use a different value.
+// This limit is verified when user attaches files to a composed message.
+// Size in bytes (possible unit suffix: K, M, G)
+$config['max_message_size'] = '100M';
+
+// Maximum number of recipients per message (including To, Cc, Bcc).
+// Default: 0 (no limit)
+$config['max_recipients'] = 0;
+
+// Maximum number of recipients per message excluding Bcc header.
+// This is a soft limit, which means we only display a warning to the user.
+// Default: 5
+$config['max_disclosed_recipients'] = 5;
+
+// Maximum allowed number of members of an address group. Default: 0 (no limit)
+// If 'max_recipients' is set this value should be less or equal
+$config['max_group_members'] = 0;
+
+// Name your service. This is displayed on the login screen and in the window title
+$config['product_name'] = 'Roundcube Webmail';
+
+// Add this user-agent to message headers when sending. Default: not set.
+$config['useragent'] = null;
+
+// try to load host-specific configuration
+// see https://github.com/roundcube/roundcubemail/wiki/Configuration:-Multi-Domain-Setup
+// for more details
+$config['include_host_config'] = false;
+
+// path to a text file which will be added to each sent message
+// paths are relative to the Roundcube root folder
+$config['generic_message_footer'] = '';
+
+// path to a text file which will be added to each sent HTML message
+// paths are relative to the Roundcube root folder
+$config['generic_message_footer_html'] = '';
+
+// add a received header to outgoing mails containing the creators IP and hostname
+$config['http_received_header'] = false;
+
+// Whether or not to encrypt the IP address and the host name
+// these could, in some circles, be considered as sensitive information;
+// however, for the administrator, these could be invaluable help
+// when tracking down issues.
+$config['http_received_header_encrypt'] = false;
+
+// number of chars allowed for line when wrapping text.
+// text wrapping is done when composing/sending messages
+$config['line_length'] = 72;
+
+// send plaintext messages as format=flowed
+$config['send_format_flowed'] = true;
+
+// According to RFC2298, return receipt envelope sender address must be empty.
+// If this option is true, Roundcube will use user's identity as envelope sender for MDN responses.
+$config['mdn_use_from'] = false;
+
+// Set identities access level:
+// 0 - many identities with possibility to edit all params
+// 1 - many identities with possibility to edit all params but not email address
+// 2 - one identity with possibility to edit all params
+// 3 - one identity with possibility to edit all params but not email address
+// 4 - one identity with possibility to edit only signature
+$config['identities_level'] = 0;
+
+// Maximum size of uploaded image (in kilobytes) for HTML identities.
+// Images (in html signatures) are stored in database as data URIs.
+$config['identity_image_size'] = 64;
+
+// Maximum size of uploaded image (in kilobytes) for HTML responses.
+// Images (in html responses) are stored in database as data URIs.
+$config['response_image_size'] = 64;
+
+// Mimetypes supported by the browser.
+// Attachments of these types will open in a preview window.
+// Either a comma-separated list or an array. Default list includes:
+// text/plain,text/html,
+// image/jpeg,image/gif,image/png,image/bmp,image/tiff,image/webp,
+// application/x-javascript,application/pdf,application/x-shockwave-flash
+$config['client_mimetypes'] = null;
+
+// Path to a local mime magic database file for PHPs finfo extension.
+// Set to null if the default path should be used.
+$config['mime_magic'] = null;
+
+// Absolute path to a local mime.types mapping table file.
+// This is used to derive mime-types from the filename extension or vice versa.
+// Such a file is usually part of the apache webserver. If you don't find a file named mime.types on your system,
+// download it from http://svn.apache.org/repos/asf/httpd/httpd/trunk/docs/conf/mime.types
+$config['mime_types'] = null;
+
+// path to imagemagick identify binary (if not set we'll use Imagick or GD extensions)
+$config['im_identify_path'] = null;
+
+// path to imagemagick convert binary (if not set we'll use Imagick or GD extensions)
+$config['im_convert_path'] = null;
+
+// Size of thumbnails from image attachments displayed below the message content.
+// Note: whether images are displayed at all depends on the 'inline_images' option.
+// Set to 0 to display images in full size.
+$config['image_thumbnail_size'] = 240;
+
+// maximum size of uploaded contact photos in pixel
+$config['contact_photo_size'] = 160;
+
+// Enable DNS checking for e-mail address validation
+$config['email_dns_check'] = false;
+
+// Disables saving sent messages in Sent folder (like gmail) (Default: false)
+// Note: useful when SMTP server stores sent mail in user mailbox
+$config['no_save_sent_messages'] = false;
+
+// Improve system security by using special URL with security token.
+// This can be set to a number defining token length. Default: 16.
+// Warning: This requires http server configuration. Sample:
+// RewriteRule ^/roundcubemail/[a-zA-Z0-9]{16}/(.*) /roundcubemail/$1 [PT]
+// Alias /roundcubemail /var/www/roundcubemail/
+// Warning: This feature does NOT work with request_path = 'SCRIPT_NAME'
+// Note: Use assets_path to not prevent the browser from caching assets
+$config['use_secure_urls'] = false;
+
+// Specifies the full path of the original HTTP request, either as a real path or
+// $_SERVER field name. This might be useful when Roundcube runs behind a reverse
+// proxy using a subpath. This is a path part of the URL, not the full URL!
+// The reverse proxy config can specify a custom header (e.g. X-Forwarded-Path) containing
+// the path under which Roundcube is exposed to the outside world (e.g. /rcube/).
+// This header value is then available in PHP with $_SERVER['HTTP_X_FORWARDED_PATH'].
+// By default the path comes from 'REDIRECT_SCRIPT_URL', 'SCRIPT_NAME' or 'REQUEST_URI',
+// whichever is set (in this order).
+$config['request_path'] = null;
+
+// Allows to define separate server/path for image/js/css files
+// Warning: If the domain is different cross-domain access to some
+// resources need to be allowed
+// Sample:
+// <FilesMatch ".(eot|ttf|woff)">
+// Header set Access-Control-Allow-Origin "*"
+// </FilesMatch>
+$config['assets_path'] = '';
+
+// While assets_path is for the browser, assets_dir informs
+// PHP code about the location of asset files in filesystem
+$config['assets_dir'] = '';
+
+// Options passed when creating Guzzle HTTP client, used to fetch remote content
+// For example:
+// [
+// 'timeout' => 10,
+// 'proxy' => 'tcp://localhost:8125',
+// ]
+$config['http_client'] = [];
+
+// List of supported subject prefixes for a message reply
+// This list is used to clean the subject when replying or sorting messages
+$config['subject_reply_prefixes'] = ['Re:'];
+
+// List of supported subject prefixes for a message forward
+// This list is used to clean the subject when forwarding or sorting messages
+$config['subject_forward_prefixes'] = ['Fwd:', 'Fw:'];
+
+// Prefix to use in subject when replying to a message
+$config['response_prefix'] = 'Re:';
+
+// Prefix to use in subject when forwarding a message
+$config['forward_prefix'] = 'Fwd:';
+
+// ----------------------------------
+// PLUGINS
+// ----------------------------------
+
+// List of active plugins (in plugins/ directory)
+$config['plugins'] = [];
+
+// ----------------------------------
+// USER INTERFACE
+// ----------------------------------
+
+// default messages sort column. Use empty value for default server's sorting,
+// or 'arrival', 'date', 'subject', 'from', 'to', 'fromto', 'size', 'cc'
+$config['message_sort_col'] = '';
+
+// default messages sort order
+$config['message_sort_order'] = 'DESC';
+
+// These cols are shown in the message list. Available cols are:
+// subject, from, to, fromto, cc, replyto, date, size, status, flag, attachment, priority
+$config['list_cols'] = ['subject', 'status', 'fromto', 'date', 'size', 'flag', 'attachment'];
+
+// the default locale setting (leave empty for auto-detection)
+// RFC1766 formatted language name like en_US, de_DE, de_CH, fr_FR, pt_BR
+$config['language'] = null;
+
+// use this format for date display (PHP DateTime format)
+$config['date_format'] = 'Y-m-d';
+
+// give this choice of date formats to the user to select from
+// Note: do not use ambiguous formats like m/d/Y
+$config['date_formats'] = ['Y-m-d', 'Y/m/d', 'Y.m.d', 'd-m-Y', 'd/m/Y', 'd.m.Y', 'j.n.Y'];
+
+// use this format for time display (PHP DateTime format)
+$config['time_format'] = 'H:i';
+
+// give this choice of time formats to the user to select from
+$config['time_formats'] = ['G:i', 'H:i', 'g:i a', 'h:i A'];
+
+// use this format for short date display (derived from date_format and time_format)
+$config['date_short'] = 'D H:i';
+
+// use this format for detailed date/time formatting (derived from date_format and time_format)
+$config['date_long'] = 'Y-m-d H:i';
+
+// store draft message is this mailbox
+// leave blank if draft messages should not be stored
+// NOTE: Use folder names with namespace prefix (INBOX. on Courier-IMAP)
+$config['drafts_mbox'] = 'Drafts';
+
+// store spam messages in this mailbox
+// NOTE: Use folder names with namespace prefix (INBOX. on Courier-IMAP)
+$config['junk_mbox'] = 'Junk';
+
+// store sent message is this mailbox
+// leave blank if sent messages should not be stored
+// NOTE: Use folder names with namespace prefix (INBOX. on Courier-IMAP)
+$config['sent_mbox'] = 'Sent';
+
+// move messages to this folder when deleting them
+// leave blank if they should be deleted directly
+// NOTE: Use folder names with namespace prefix (INBOX. on Courier-IMAP)
+$config['trash_mbox'] = 'Trash';
+
+// automatically create the above listed default folders on user login
+$config['create_default_folders'] = false;
+
+// protect the default folders from renames, deletes, and subscription changes
+$config['protect_default_folders'] = true;
+
+// Disable localization of the default folder names listed above
+$config['show_real_foldernames'] = false;
+
+// if in your system 0 quota means no limit set this option to true
+$config['quota_zero_as_unlimited'] = false;
+
+// Make use of the built-in spell checker.
+$config['enable_spellcheck'] = false;
+
+// Enables spellchecker exceptions dictionary.
+// Setting it to 'shared' will make the dictionary shared by all users.
+$config['spellcheck_dictionary'] = false;
+
+// Set the spell checking engine. Possible values:
+// - 'googie' - the default (also used for connecting to Nox Spell Server, see 'spellcheck_uri' setting)
+// - 'pspell' - requires the PHP Pspell module and aspell installed
+// - 'enchant' - requires the PHP Enchant module
+// - 'atd' - install your own After the Deadline server or check with the people at http://www.afterthedeadline.com before using their API
+// Since Google shut down their public spell checking service, the default settings
+// connect to http://spell.roundcube.net which is a hosted service provided by Roundcube.
+// You can connect to any other googie-compliant service by setting 'spellcheck_uri' accordingly.
+// Debian: default to enchant to not trigger external APIs
+$config['spellcheck_engine'] = 'enchant';
+
+// For locally installed Nox Spell Server or After the Deadline services,
+// please specify the URI to call it.
+// Get Nox Spell Server from http://orangoo.com/labs/?page_id=72 or
+// the After the Deadline package from http://www.afterthedeadline.com.
+// Leave empty to use the public API of service.afterthedeadline.com
+$config['spellcheck_uri'] = '';
+
+// These languages can be selected for spell checking.
+// Configure as a PHP style hash array: ['en'=>'English', 'de'=>'Deutsch'];
+// Leave empty for default set of available language.
+$config['spellcheck_languages'] = null;
+
+// Makes that words with all letters capitalized will be ignored (e.g. GOOGLE)
+$config['spellcheck_ignore_caps'] = false;
+
+// Makes that words with numbers will be ignored (e.g. g00gle)
+$config['spellcheck_ignore_nums'] = false;
+
+// Makes that words with symbols will be ignored (e.g. g@@gle)
+$config['spellcheck_ignore_syms'] = false;
+
+// Number of lines at the end of a message considered to contain the signature.
+// Increase this value if signatures are not properly detected and colored
+$config['sig_max_lines'] = 15;
+
+// don't let users set pagesize to more than this value if set
+$config['max_pagesize'] = 200;
+
+// Minimal value of user's 'refresh_interval' setting (in seconds)
+$config['min_refresh_interval'] = 60;
+
+// Specifies for how many seconds the Undo button will be available
+// after object delete action. Currently used with supporting address book sources.
+// Setting it to 0, disables the feature.
+$config['undo_timeout'] = 0;
+
+// A static list of canned responses which are immutable for the user
+$config['compose_responses_static'] = [
+// ['name' => 'Canned Response 1', 'text' => 'Static Response One'],
+// ['name' => 'Canned Response 2', 'text' => 'Static Response Two'],
+];
+
+// List of HKP key servers for PGP public key lookups in Enigma/Mailvelope
+// Note: Lookup is client-side, so the server must support Cross-Origin Resource Sharing
+$config['keyservers'] = ['keys.openpgp.org'];
+
+// Enables use of the Main Keyring in Mailvelope? If disabled, a per-site keyring
+// will be used. This is set to false for backwards compatibility.
+$config['mailvelope_main_keyring'] = false;
+
+// Mailvelope RSA bit size for newly generated keys, either 2048 or 4096.
+// It maybe desirable to use 2048 for sites with many mobile users.
+$config['mailvelope_keysize'] = 4096;
+
+// Html2Text link handling options:
+// 0 - links will be removed
+// 1 - a list of link URLs should be listed at the end of the text (default)
+// 2 - link should be displayed to the original point in the text they appeared
+$config['html2text_links'] = 1;
+
+// Html2Text text width. Maximum width of the formatted text, in columns. Default: 75.
+$config['html2text_width'] = 75;
+
+// ----------------------------------
+// ADDRESSBOOK SETTINGS
+// ----------------------------------
+
+// This indicates which type of address book to use. Possible choices:
+// 'sql' - built-in sql addressbook enabled (default),
+// '' - built-in sql addressbook disabled.
+// Still LDAP or plugin-added addressbooks will be available.
+// BC Note: The value can actually be anything except 'sql', it does not matter.
+$config['address_book_type'] = 'sql';
+
+// In order to enable public ldap search, configure an array like the Verisign
+// example further below. if you would like to test, simply uncomment the example.
+// Array key must contain only safe characters, ie. a-zA-Z0-9_
+$config['ldap_public'] = [];
+
+// If you are going to use LDAP for individual address books, you will need to
+// set 'user_specific' to true and use the variables to generate the appropriate DNs to access it.
+//
+// The recommended directory structure for LDAP is to store all the address book entries
+// under the users main entry, e.g.:
+//
+// o=root
+// ou=people
+// uid=user@domain
+// mail=contact@contactdomain
+//
+// So the base_dn would be uid=%fu,ou=people,o=root
+// The bind_dn would be the same as based_dn or some super user login.
+/*
+ * example config for Verisign directory
+ *
+$config['ldap_public']['Verisign'] = [
+ 'name' => 'Verisign.com',
+ // Replacement variables supported in host names:
+ // %h - user's IMAP hostname
+ // %n - hostname ($_SERVER['SERVER_NAME'])
+ // %t - hostname without the first part
+ // %d - domain (http hostname $_SERVER['HTTP_HOST'] without the first part)
+ // %z - IMAP domain (IMAP hostname without the first part)
+ // For example %n = mail.domain.tld, %t = domain.tld
+ // Note: Host can also be a full URI e.g. ldaps://hostname.local:636 (for SSL)
+ // Note: If port number is omitted, it will be set to 636 (for ldaps://) or 389 otherwise.
+ // Note: To enable TLS use tls:// prefix
+ 'hosts' => array('directory.verisign.com:389'),
+ 'ldap_version' => 3, // using LDAPv3
+ 'network_timeout' => 10, // The timeout (in seconds) for connect + bind attempts. This is only supported in PHP >= 5.3.0 with OpenLDAP 2.x
+ 'user_specific' => false, // If true the base_dn, bind_dn and bind_pass default to the user's IMAP login.
+ // When 'user_specific' is enabled following variables can be used in base_dn/bind_dn config:
+ // %fu - The full username provided, assumes the username is an email
+ // address, uses the username_domain value if not an email address.
+ // %u - The username prior to the '@'.
+ // %d - The domain name after the '@'.
+ // %dc - The domain name hierarchal string e.g. "dc=test,dc=domain,dc=com"
+ // %dn - DN found by ldap search when search_filter/search_base_dn are used
+ 'base_dn' => '',
+ 'bind_dn' => '',
+ 'bind_pass' => '',
+ // It's possible to bind for an individual address book
+ // The login name is used to search for the DN to bind with
+ 'search_base_dn' => '',
+ 'search_filter' => '', // e.g. '(&(objectClass=posixAccount)(uid=%u))'
+ // DN and password to bind as before searching for bind DN, if anonymous search is not allowed
+ 'search_bind_dn' => '',
+ 'search_bind_pw' => '',
+ // Base DN and filter used for resolving the user's domain root DN which feeds the %dc variables
+ // Leave empty to skip this lookup and derive the root DN from the username domain
+ 'domain_base_dn' => '',
+ 'domain_filter' => '',
+ // Optional map of replacement strings => attributes used when binding for an individual address book
+ 'search_bind_attrib' => [], // e.g. ['%udc' => 'ou']
+ // Default for %dn variable if search doesn't return DN value
+ 'search_dn_default' => '',
+ // Optional authentication identifier to be used as SASL authorization proxy
+ // bind_dn need to be empty
+ 'auth_cid' => '',
+ // SASL authentication method (for proxy auth), e.g. DIGEST-MD5
+ 'auth_method' => '',
+ // Indicates if the addressbook shall be hidden from the list.
+ // With this option enabled you can still search/view contacts.
+ 'hidden' => false,
+ // Indicates if the addressbook shall not list contacts but only allows searching.
+ 'searchonly' => false,
+ // Indicates if we can write to the LDAP directory or not.
+ // If writable is true then these fields need to be populated:
+ // LDAP_Object_Classes, required_fields, LDAP_rdn
+ 'writable' => false,
+ // To create a new contact these are the object classes to specify
+ // (or any other classes you wish to use).
+ 'LDAP_Object_Classes' => ['top', 'inetOrgPerson'],
+ // The RDN field that is used for new entries, this field needs
+ // to be one of the search_fields, the base of base_dn is appended
+ // to the RDN to insert into the LDAP directory.
+ 'LDAP_rdn' => 'cn',
+ // The required attributes needed to build a new contact as required by
+ // the object classes (can include additional fields not required by the object classes).
+ 'required_fields' => ['cn', 'sn', 'mail'],
+ // The attributes used when searching with "All fields" option
+ // If empty, attributes for name, surname, firstname and email fields will be used
+ 'search_fields' => ['mail', 'cn'],
+ // mapping of contact fields to directory attributes
+ // 1. for every attribute one can specify the number of values (limit) allowed.
+ // default is 1, a wildcard * means unlimited
+ // 2. another possible parameter is separator character for composite fields
+ // 3. it's possible to define field format for write operations, e.g. for date fields
+ // example: 'birthday:date[YmdHis\\Z]'
+ 'fieldmap' => [
+ // Roundcube => LDAP:limit
+ 'name' => 'cn',
+ 'surname' => 'sn',
+ 'firstname' => 'givenName',
+ 'jobtitle' => 'title',
+ 'email' => 'mail:*',
+ 'phone:home' => 'homePhone',
+ 'phone:work' => 'telephoneNumber',
+ 'phone:mobile' => 'mobile',
+ 'phone:pager' => 'pager',
+ 'phone:workfax' => 'facsimileTelephoneNumber',
+ 'street' => 'street',
+ 'zipcode' => 'postalCode',
+ 'region' => 'st',
+ 'locality' => 'l',
+ // if you country is a complex object, you need to configure 'sub_fields' below
+ 'country' => 'c',
+ 'organization' => 'o',
+ 'department' => 'ou',
+ 'jobtitle' => 'title',
+ 'notes' => 'description',
+ 'photo' => 'jpegPhoto',
+ // these currently don't work:
+ // 'manager' => 'manager',
+ // 'assistant' => 'secretary',
+ ],
+ // Map of contact sub-objects (attribute name => objectClass(es)), e.g. 'c' => 'country'
+ 'sub_fields' => [],
+ // Generate values for the following LDAP attributes automatically when creating a new record
+ 'autovalues' => [
+ // 'uid' => 'md5(microtime())', // You may specify PHP code snippets which are then eval'ed
+ // 'mail' => '{givenname}.{sn}@mydomain.com', // or composite strings with placeholders for existing attributes
+ ],
+ 'sort' => 'cn', // The field to sort the listing by.
+ 'scope' => 'sub', // search mode: sub|base|list
+ 'filter' => '(objectClass=inetOrgPerson)', // used for basic listing (if not empty) and will be &'d with search queries. example: status=act
+ 'fuzzy_search' => true, // server allows wildcard search
+ 'vlv' => false, // Enable Virtual List View to more efficiently fetch paginated data (if server supports it)
+ 'vlv_search' => false, // Use Virtual List View functions for autocompletion searches (if server supports it)
+ 'numsub_filter' => '(objectClass=organizationalUnit)', // with VLV, we also use numSubOrdinates to query the total number of records. Set this filter to get all numSubOrdinates attributes for counting
+ 'config_root_dn' => 'cn=config', // Root DN to search config entries (e.g. vlv indexes)
+ 'sizelimit' => '0', // Enables you to limit the count of entries fetched. Setting this to 0 means no limit.
+ 'timelimit' => '0', // Sets the number of seconds how long is spend on the search. Setting this to 0 means no limit.
+ 'referrals' => false, // Sets the LDAP_OPT_REFERRALS option. Mostly used in multi-domain Active Directory setups
+ 'dereference' => 0, // Sets the LDAP_OPT_DEREF option. One of: LDAP_DEREF_NEVER, LDAP_DEREF_SEARCHING, LDAP_DEREF_FINDING, LDAP_DEREF_ALWAYS
+ // Used where addressbook contains aliases to objects elsewhere in the LDAP tree.
+
+ // definition for contact groups (uncomment if no groups are supported)
+ // for the groups base_dn, the user replacements %fu, %u, %d and %dc work as for base_dn (see above)
+ // if the groups base_dn is empty, the contact base_dn is used for the groups as well
+ // -> in this case, assure that groups and contacts are separated due to the concerning filters!
+ 'groups' => [
+ 'base_dn' => '',
+ 'scope' => 'sub', // Search mode: sub|base|list
+ 'filter' => '(objectClass=groupOfNames)',
+ 'object_classes' => ['top', 'groupOfNames'], // Object classes to be assigned to new groups
+ 'member_attr' => 'member', // Name of the default member attribute, e.g. uniqueMember
+ 'name_attr' => 'cn', // Attribute to be used as group name
+ 'email_attr' => 'mail', // Group email address attribute (e.g. for mailing lists)
+ 'member_filter' => '(objectclass=*)', // Optional filter to use when querying for group members
+ 'vlv' => false, // Use VLV controls to list groups
+ 'class_member_attr' => [ // Mapping of group object class to member attribute used in these objects
+ 'groupofnames' => 'member',
+ 'groupofuniquenames' => 'uniquemember'
+ ],
+ ],
+ // this configuration replaces the regular groups listing in the directory tree with
+ // a hard-coded list of groups, each listing entries with the configured base DN and filter.
+ // if the 'groups' option from above is set, it'll be shown as the first entry with the name 'Groups'
+ 'group_filters' => [
+ 'departments' => [
+ 'name' => 'Company Departments',
+ 'scope' => 'list',
+ 'base_dn' => 'ou=Groups,dc=mydomain,dc=com',
+ 'filter' => '(|(objectclass=groupofuniquenames)(objectclass=groupofurls))',
+ 'name_attr' => 'cn',
+ ],
+ 'customers' => [
+ 'name' => 'Customers',
+ 'scope' => 'sub',
+ 'base_dn' => 'ou=Customers,dc=mydomain,dc=com',
+ 'filter' => '(objectClass=inetOrgPerson)',
+ 'name_attr' => 'sn',
+ ],
+ ],
+];
+*/
+
+// An ordered array of the ids of the addressbooks that should be searched
+// when populating address autocomplete fields server-side. ex: ['sql','Verisign'];
+$config['autocomplete_addressbooks'] = ['sql'];
+
+// The minimum number of characters required to be typed in an autocomplete field
+// before address books will be searched. Most useful for LDAP directories that
+// may need to do lengthy results building given overly-broad searches
+$config['autocomplete_min_length'] = 1;
+
+// Number of parallel autocomplete requests.
+// If there's more than one address book, n parallel (async) requests will be created,
+// where each request will search in one address book. By default (0), all address
+// books are searched in one request.
+$config['autocomplete_threads'] = 0;
+
+// Max. number of entries in autocomplete popup. Default: 15.
+$config['autocomplete_max'] = 15;
+
+// show address fields in this order
+// available placeholders: {street}, {locality}, {zipcode}, {country}, {region}
+$config['address_template'] = '{street}<br/>{locality} {zipcode}<br/>{country} {region}';
+
+// Matching mode for addressbook search (including autocompletion)
+// 0 - partial (*abc*), default
+// 1 - strict (abc)
+// 2 - prefix (abc*)
+// Note: For LDAP sources fuzzy_search must be enabled to use 'partial' or 'prefix' mode
+$config['addressbook_search_mode'] = 0;
+
+// List of fields used on contacts list and for autocompletion searches
+// Warning: These are field names not LDAP attributes (see 'fieldmap' setting)!
+$config['contactlist_fields'] = ['name', 'firstname', 'surname', 'email'];
+
+// Template of contact entry on the autocompletion list.
+// You can use contact fields as: name, email, organization, department, etc.
+// See program/actions/contacts/index.php for a list
+$config['contact_search_name'] = '{name} <{email}>';
+
+// Contact mode. If your contacts are mostly business, switch it to 'business'.
+// This will prioritize form fields related to 'work' (instead of 'home').
+// Default: 'private'.
+$config['contact_form_mode'] = 'private';
+
+// The addressbook source to store automatically collected recipients in.
+// Default: true (the built-in "Collected recipients" addressbook, source id = '1')
+// Note: It can be set to any writeable addressbook, e.g. 'sql'
+$config['collected_recipients'] = true;
+
+// The addressbook source to store trusted senders in.
+// Default: true (the built-in "Trusted senders" addressbook, source id = '2')
+// Note: It can be set to any writeable addressbook, e.g. 'sql'
+$config['collected_senders'] = true;
+
+
+// ----------------------------------
+// USER PREFERENCES
+// ----------------------------------
+
+// Use this charset as fallback for message decoding
+$config['default_charset'] = 'UTF-8';
+
+// Skin name: folder from skins/
+$config['skin'] = 'elastic';
+
+// Limit skins available for the user.
+// Note: When not empty, it should include the default skin set in 'skin' option.
+$config['skins_allowed'] = [];
+
+// Enables using standard browser windows (that can be handled as tabs)
+// instead of popup windows
+$config['standard_windows'] = false;
+
+// show up to X items in messages list view
+$config['mail_pagesize'] = 50;
+
+// show up to X items in contacts list view
+$config['addressbook_pagesize'] = 50;
+
+// sort contacts by this col (preferably either one of name, firstname, surname)
+$config['addressbook_sort_col'] = 'surname';
+
+// The way how contact names are displayed in the list.
+// 0: prefix firstname middlename surname suffix (only if display name is not set)
+// 1: firstname middlename surname
+// 2: surname firstname middlename
+// 3: surname, firstname middlename
+$config['addressbook_name_listing'] = 0;
+
+// use this timezone to display date/time
+// valid timezone identifiers are listed here: php.net/manual/en/timezones.php
+// 'auto' will use the browser's timezone settings
+$config['timezone'] = 'auto';
+
+// prefer displaying HTML messages
+$config['prefer_html'] = true;
+
+// Display remote resources (inline images, styles) in HTML messages. Default: 0.
+// 0 - Never, always ask
+// 1 - Allow from my contacts (all writeable addressbooks + collected senders and recipients)
+// 2 - Always allow
+// 3 - Allow from trusted senders only
+$config['show_images'] = 0;
+
+// open messages in new window
+$config['message_extwin'] = false;
+
+// open message compose form in new window
+$config['compose_extwin'] = false;
+
+// compose html formatted messages by default
+// 0 - never,
+// 1 - always,
+// 2 - on reply to HTML message,
+// 3 - on forward or reply to HTML message
+// 4 - always, except when replying to plain text message
+$config['htmleditor'] = 0;
+
+// save copies of compose messages in the browser's local storage
+// for recovery in case of browser crashes and session timeout.
+$config['compose_save_localstorage'] = true;
+
+// show pretty dates as standard
+$config['prettydate'] = true;
+
+// save compose message every 300 seconds (5min)
+$config['draft_autosave'] = 300;
+
+// Interface layout. Default: 'widescreen'.
+// 'widescreen' - three columns
+// 'desktop' - two columns, preview on bottom
+// 'list' - two columns, no preview
+$config['layout'] = 'widescreen';
+
+// Mark as read when viewing a message (delay in seconds)
+// Set to -1 if messages should not be marked as read
+$config['mail_read_time'] = 0;
+
+// Clear Trash on logout. Remove all messages or only older than N days.
+// Supported values: false, true, 30, 60, 90. Default: false.
+$config['logout_purge'] = false;
+
+// Compact INBOX on logout
+$config['logout_expunge'] = false;
+
+// Display attached images below the message body
+$config['inline_images'] = true;
+
+// Encoding of long/non-ascii attachment names:
+// 0 - Full RFC 2231 compatible
+// 1 - RFC 2047 for 'name' and RFC 2231 for 'filename' parameter (Thunderbird's default)
+// 2 - Full 2047 compatible
+$config['mime_param_folding'] = 1;
+
+// Set true if deleted messages should not be displayed
+// This will make the application run slower
+$config['skip_deleted'] = false;
+
+// Set true to Mark deleted messages as read as well as deleted
+// False means that a message's read status is not affected by marking it as deleted
+$config['read_when_deleted'] = true;
+
+// Set to true to never delete messages immediately
+// Use 'Purge' to remove messages marked as deleted
+$config['flag_for_deletion'] = false;
+
+// Default interval for auto-refresh requests (in seconds)
+// These are requests for system state updates e.g. checking for new messages, etc.
+// Setting it to 0 disables the feature.
+$config['refresh_interval'] = 60;
+
+// If true all folders will be checked for recent messages
+$config['check_all_folders'] = false;
+
+// If true, after message/contact delete/move, the next message/contact will be displayed
+$config['display_next'] = true;
+
+// Default messages listing mode. One of 'threads' or 'list'.
+$config['default_list_mode'] = 'list';
+
+// 0 - Do not expand threads
+// 1 - Expand all threads automatically
+// 2 - Expand only threads with unread messages
+$config['autoexpand_threads'] = 0;
+
+// When replying:
+// -1 - don't cite the original message
+// 0 - place cursor below the original message
+// 1 - place cursor above original message (top posting)
+// 2 - place cursor above original message (top posting), but do not indent the quote
+$config['reply_mode'] = 0;
+
+// When replying strip original signature from message
+$config['strip_existing_sig'] = true;
+
+// Show signature:
+// 0 - Never
+// 1 - Always
+// 2 - New messages only
+// 3 - Forwards and Replies only
+$config['show_sig'] = 1;
+
+// By default the signature is placed depending on cursor position (reply_mode).
+// Sometimes it might be convenient to start the reply on top but keep
+// the signature below the quoted text (sig_below = true).
+$config['sig_below'] = false;
+
+// Enables adding of standard separator to the signature
+$config['sig_separator'] = true;
+
+// Use MIME encoding (quoted-printable) for 8bit characters in message body
+$config['force_7bit'] = false;
+
+// Default fields configuration for mail search.
+// The array can contain a per-folder list of header fields which should be considered when searching
+// The entry with key '*' stands for all folders which do not have a specific list set.
+// Supported fields: subject, from, to, cc, bcc, replyto, followupto, body, text.
+// Please note that folder names should to be in sync with $config['*_mbox'] options
+$config['search_mods'] = null; // Example: ['*' => ['subject'=>1, 'from'=>1], 'Sent' => ['subject'=>1, 'to'=>1]];
+
+// Defaults of the addressbook search field configuration.
+$config['addressbook_search_mods'] = null; // Example: ['name'=>1, 'firstname'=>1, 'surname'=>1, 'email'=>1, '*'=>1];
+
+// Directly delete messages in Junk instead of moving to Trash
+$config['delete_junk'] = false;
+
+// Behavior if a received message requests a message delivery notification (read receipt)
+// 0 = ask the user,
+// 1 = send automatically,
+// 2 = ignore (never send or ask)
+// 3 = send automatically if sender is in my contacts, otherwise ask the user
+// 4 = send automatically if sender is in my contacts, otherwise ignore
+// 5 = send automatically if sender is a trusted sender, otherwise ask the user
+// 6 = send automatically if sender is a trusted sender, otherwise ignore
+$config['mdn_requests'] = 0;
+
+// Return receipt checkbox default state
+$config['mdn_default'] = 0;
+
+// Delivery Status Notification checkbox default state
+$config['dsn_default'] = 0;
+
+// Place replies in the folder of the message being replied to
+$config['reply_same_folder'] = false;
+
+// Sets default mode of Forward feature to "forward as attachment"
+$config['forward_attachment'] = false;
+
+// Defines address book (internal index) to which new contacts will be added
+// By default it is the first writeable addressbook.
+// Note: Use '0' for built-in address book.
+$config['default_addressbook'] = null;
+
+// Enables spell checking before sending a message.
+$config['spellcheck_before_send'] = false;
+
+// Skip alternative email addresses in autocompletion (show one address per contact)
+$config['autocomplete_single'] = false;
+
+// Default font for composed HTML message.
+// Supported values: Andale Mono, Arial, Arial Black, Book Antiqua, Courier New,
+// Georgia, Helvetica, Impact, Tahoma, Terminal, Times New Roman, Trebuchet MS, Verdana
+$config['default_font'] = 'Verdana';
+
+// Default font size for composed HTML message.
+// Supported sizes: 8pt, 10pt, 12pt, 14pt, 18pt, 24pt, 36pt
+$config['default_font_size'] = '10pt';
+
+// Enables display of email address with name instead of a name (and address in title)
+$config['message_show_email'] = false;
+
+// Default behavior of Reply-All button:
+// 0 - Reply-All always
+// 1 - Reply-List if mailing list is detected
+$config['reply_all_mode'] = 0;
--- /dev/null
+# This is a sample with suggested security and performance options
+
+<IfModule mod_rewrite.c>
+Options +SymLinksIfOwnerMatch
+RewriteEngine On
+RewriteRule ^favicon\.ico$ skins/elastic/images/favicon.ico
+
+# security rules:
+# - deny access to files not containing a dot or starting with a dot
+# in all locations except installer directory
+RewriteRule ^(?!installer|\.well-known\/|[a-zA-Z0-9]{16})(\.?[^\.]+)$ - [F]
+# - deny access to some locations
+RewriteRule ^/?(\.git|\.tx|SQL|bin|config|logs|temp|tests|vendor|program\/(include|lib|localization|steps)) - [F]
+# - deny access to some documentation files
+RewriteRule /?(README.*|CHANGELOG.*|SECURITY.*|meta\.json|composer\..*|jsdeps.json)$ - [F]
+</IfModule>
+
+<IfModule mod_deflate.c>
+SetOutputFilter DEFLATE
+</IfModule>
+
+# prefer to brotli over gzip if brotli is available
+<IfModule mod_brotli.c>
+SetOutputFilter BROTLI_COMPRESS
+# some assets have been compressed, so no need to do it again
+SetEnvIfNoCase Request_URI \.(?:gif|jpe?g|png|web[pm]|woff2?)$ no-brotli
+</IfModule>
+
+<IfModule mod_expires.c>
+ExpiresActive On
+ExpiresDefault "access plus 1 month"
+</IfModule>
+
+FileETag MTime Size
+
+<IfModule mod_autoindex.c>
+Options -Indexes
+</IfModule>
+
+<IfModule mod_headers.c>
+# Disable page indexing
+Header set X-Robots-Tag "noindex, nofollow"
+
+# replace 'merge' with 'append' for Apache < 2.2.9
+#Header merge Cache-Control public env=!NO_CACHE
+
+# Optional security headers
+# Only provides increased security if the browser supports those features
+# Be careful! Testing is required! They should be adjusted to your installation / user environment
+
+# HSTS - HTTP Strict Transport Security
+#Header always set Strict-Transport-Security "max-age=31536000; preload" env=HTTPS
+
+# HPKP - HTTP Public Key Pinning
+# Only template - fill with your values
+#Header always set Public-Key-Pins "max-age=3600; report-uri=\"\"; pin-sha256=\"\"; pin-sha256=\"\"" env=HTTPS
+
+# X-Xss-Protection
+# This header is used to configure the built in reflective XSS protection found in Internet Explorer, Chrome and Safari (Webkit).
+#Header set X-XSS-Protection "1; mode=block"
+
+# X-Frame-Options
+# The X-Frame-Options header (RFC), or XFO header, protects your visitors against clickjacking attacks
+# Already set by php code! Do not activate both options
+#Header set X-Frame-Options SAMEORIGIN
+
+# X-Content-Type-Options
+# It prevents Google Chrome and Internet Explorer from trying to mime-sniff the content-type of a response away from the one being declared by the server.
+#Header set X-Content-Type-Options "nosniff"
+
+</IfModule>
--- /dev/null
+# You may want to set up this alias differently depending on your
+# virtual host configuration. Do not forget to adapt the rest of the
+# configuration.
+
+# Look at /var/lib/roundcube/.htaccess. You may need to migrate some
+# of those php_flag/php_value to your setup.
+
+alias.url += ("/roundcube" => "/var/lib/roundcube/public_html")
+
+$HTTP["url"] =~ "^/roundcube" {
+ server.follow-symlink = "enable"
+}
+
+$HTTP["url"] =~ "^/roundcube/config|/roundcube/temp|/roundcube/logs" {
+ url.access-deny = ( "" )
+}
--- /dev/null
+<?php
+
+/**
+ * Local mapping file to specify mime-types based on common file-name extensions
+ *
+ * Please note that this mapping takes precedence over the content-based mime-type detection
+ * and should only contain mappings which cannot be detected properly from the file contents.
+ */
+
+return [
+ 'xls' => 'application/vnd.ms-excel',
+ 'xlm' => 'application/vnd.ms-excel',
+ 'xla' => 'application/vnd.ms-excel',
+ 'xlc' => 'application/vnd.ms-excel',
+ 'xlt' => 'application/vnd.ms-excel',
+ 'xlw' => 'application/vnd.ms-excel',
+ 'pdf' => 'application/pdf',
+ 'ppt' => 'application/vnd.ms-powerpoint',
+ 'pps' => 'application/vnd.ms-powerpoint',
+ 'pot' => 'application/vnd.ms-powerpoint',
+ 'doc' => 'application/msword',
+ 'dot' => 'application/msword',
+ 'odc' => 'application/vnd.oasis.opendocument.chart',
+ 'otc' => 'application/vnd.oasis.opendocument.chart-template',
+ 'odf' => 'application/vnd.oasis.opendocument.formula',
+ 'otf' => 'application/vnd.oasis.opendocument.formula-template',
+ 'odg' => 'application/vnd.oasis.opendocument.graphics',
+ 'otg' => 'application/vnd.oasis.opendocument.graphics-template',
+ 'odi' => 'application/vnd.oasis.opendocument.image',
+ 'oti' => 'application/vnd.oasis.opendocument.image-template',
+ 'odp' => 'application/vnd.oasis.opendocument.presentation',
+ 'otp' => 'application/vnd.oasis.opendocument.presentation-template',
+ 'ods' => 'application/vnd.oasis.opendocument.spreadsheet',
+ 'ots' => 'application/vnd.oasis.opendocument.spreadsheet-template',
+ 'odt' => 'application/vnd.oasis.opendocument.text',
+ 'otm' => 'application/vnd.oasis.opendocument.text-master',
+ 'ott' => 'application/vnd.oasis.opendocument.text-template',
+ 'oth' => 'application/vnd.oasis.opendocument.text-web',
+ 'docm' => 'application/vnd.ms-word.document.macroEnabled.12',
+ 'docx' => 'application/vnd.openxmlformats-officedocument.wordprocessingml.document',
+ 'dotm' => 'application/vnd.ms-word.template.macroEnabled.12',
+ 'dotx' => 'application/vnd.openxmlformats-officedocument.wordprocessingml.template',
+ 'ppsm' => 'application/vnd.ms-powerpoint.slideshow.macroEnabled.12',
+ 'ppsx' => 'application/vnd.openxmlformats-officedocument.presentationml.slideshow',
+ 'pptm' => 'application/vnd.ms-powerpoint.presentation.macroEnabled.12',
+ 'pptx' => 'application/vnd.openxmlformats-officedocument.presentationml.presentation',
+ 'xlsb' => 'application/vnd.ms-excel.sheet.binary.macroEnabled.12',
+ 'xlsm' => 'application/vnd.ms-excel.sheet.macroEnabled.12',
+ 'xlsx' => 'application/vnd.openxmlformats-officedocument.spreadsheetml.sheet',
+ 'xps' => 'application/vnd.ms-xpsdocument',
+ 'rar' => 'application/x-rar-compressed',
+ '7z' => 'application/x-7z-compressed',
+ 's7z' => 'application/x-7z-compressed',
+ 'vcf' => 'text/vcard',
+ 'ics' => 'text/calendar',
+];
--- /dev/null
+<?php
+// Empty configuration for acl
+// See /usr/share/roundcube/plugins/acl/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for additional_message_headers
+// See /usr/share/roundcube/plugins/additional_message_headers/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for authres_status
+// See /usr/share/roundcube/plugins/authres_status/config.inc.php.dist for instructions
+?>
--- /dev/null
+<?php
+// Empty configuration for compose_addressbook
+// See /usr/share/roundcube/plugins/compose_addressbook/config.inc.php.dist for instructions
+?>
--- /dev/null
+<?php
+// Empty configuration for database_attachments
+// See /usr/share/roundcube/plugins/database_attachments/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for dovecot_impersonate
+// See /usr/share/roundcube/plugins/dovecot_impersonate/config.inc.php.dist for instructions
+?>
--- /dev/null
+<?php
+// Empty configuration for emoticons
+// See /usr/share/roundcube/plugins/emoticons/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for enigma
+// See /usr/share/roundcube/plugins/enigma/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for help
+// See /usr/share/roundcube/plugins/help/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for html5_notifier
+// See /usr/share/roundcube/plugins/html5_notifier/config/config.inc.php.dist for instructions
+?>
--- /dev/null
+<?php
+// Empty configuration for http_authentication
+// See /usr/share/roundcube/plugins/http_authentication/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for jqueryui
+// See /usr/share/roundcube/plugins/jqueryui/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+
+// each keyboard shortcut we support needs an entry in this array.
+
+$rcmail_config['keyboard_shortcuts_extras'] = array(
+
+);
+
+?>
--- /dev/null
+<?php
+// Empty configuration for krb_authentication
+// See /usr/share/roundcube/plugins/krb_authentication/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for managesieve
+// See /usr/share/roundcube/plugins/managesieve/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for markasjunk
+// See /usr/share/roundcube/plugins/markasjunk/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for message_highlight
+// See /usr/share/roundcube/plugins/message_highlight/config.inc.php-dist for instructions
+?>
--- /dev/null
+<?php
+// Empty configuration for new_user_identity
+// See /usr/share/roundcube/plugins/new_user_identity/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for newmail_notifier
+// See /usr/share/roundcube/plugins/newmail_notifier/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for password
+// See /usr/share/roundcube/plugins/password/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for reconnect
+// See /usr/share/roundcube/plugins/reconnect/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for redundant_attachments
+// See /usr/share/roundcube/plugins/redundant_attachments/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for sauserprefs
+// See /usr/share/roundcube/plugins/sauserprefs/config.inc.php.dist for instructions
+?>
--- /dev/null
+<?php
+// Empty configuration for squirrelmail_usercopy
+// See /usr/share/roundcube/plugins/squirrelmail_usercopy/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+<?php
+// Empty configuration for thunderbird_labels
+// See /usr/share/roundcube/plugins/thunderbird_labels/config.inc.php.dist for instructions
+?>
--- /dev/null
+<?php
+// Empty configuration for zipdownload
+// See /usr/share/roundcube/plugins/zipdownload/config.inc.php.dist for instructions
+// Check the access right of the file if you put sensitive information in it.
+$config=array();
+?>
--- /dev/null
+/lib/systemd/system/phpsessionclean.timer
\ No newline at end of file
--- /dev/null
+/lib/systemd/system/roundcube-cleandb.timer
\ No newline at end of file
--- /dev/null
+/lib/systemd/system/roundcube-gc.timer
\ No newline at end of file
projects / config / dev-mail-fbrehm / etc.git / commitdiff