+++ /dev/null
-!!! Global application defaults for XDvik
-!!! Install this file into $TEXMF/xdvi/XDvi
-!!! (use kpsewhich --expand-path '$TEXMF' to determine the location of
-!!! $TEXMF on you system).
-!!!
-!!! Lines commented out (starting with `!') are examples of
-!!! how to customize Xdvi for your personal needs.
-!!! To use these settings, copy them into your $HOME/.Xdefaults file
-!!! (remove the comments), prefix each line with `xdvi', and activate
-!!! them with:
-!!! $ xrdb -merge $HOME/.Xdefaults
-
-!!!------------------------------------------------------------------------------
-!!!------------------------ useful global settings ------------------------------
-!!!------------------------------------------------------------------------------
-
-!!! Use `logical' (TeX) pages instead of physical pages for the `g' keystroke:
-*useTeXPages: True
-
-!!! A fairly high resolution, which usually gives better results for anti-aliasing
-!!! and greater flexibility for shrink values. Generating MF fonts shouldn't be an
-!!! issue when using T1lib.
-!*mfMode: ljfour
-!*paper: a4
-
-!!! This should be the best choice for modern displays with large color depth.
-*thorough: true
-
-!!! Add some useful translations for the mouse wheel (bug #1422928)
-*wheelTranslations:\
-Shift<Btn4Down>:left(.08)\n\
-Shift<Btn5Down>:right(.08)\n\
-Ctrl<Btn4Down>:set-shrink-factor(+)\n\
-Ctrl<Btn5Down>:set-shrink-factor(-)\n\
-<Btn4Down>:wheel(-.7)\n\
-<Btn5Down>:wheel(.7)
-
-!!!------------------------------------------------------------------------------
-!!!------------------------------ Motif toolbar ---------------------------------
-!!!------------------------------------------------------------------------------
-
-!!! filename of the XPM file used for the toolbar pixmaps:
-*toolbarPixmapFile: toolbar.xpm
-
-!!! Use toolbar buttons that are non-raised by default and only appear raised
-!!! when the mouse is over a button, as in e.g. Netscape 4.x:
-*toolbarButtonsRaised: False
-
-!!! don't draw a border around armed buttons:
-*button*highlightThickness: 0
-
-!!! no extra margin above/below buttons
-*toolBar.marginHeight:0
-
-!!! some spacing around button icons and button edges
-*toolBar*button*marginHeight: 2
-*toolBar*button*marginWidth: 2
-
-
-!!! don't draw the small grey rectangle inside the armed button:
-*button*fillOnArm: false
-
-!!! Or, for a more traditional Motif look, use something like:
-!*toolbarButtonsRaised: True
-!*button*fillOnArm: True
-!*button*shadowThickness: 1
-!*toolBar.marginHeight: 0
-!*toolBarFrame.marginWidth: 0
-!*button*highlightThickness: 2
-
-!!!------------------------------------------------------------------------------
-!!!-------------------------------- Motif widgets -------------------------------
-!!!------------------------------------------------------------------------------
-!!! small shadows like in netscape 4.x
-*menuBar.shadowThickness: 1
-*button*shadowThickness: 2
-*toolBar.shadowThickness: 1
-*toolBarFrame.shadowThickness: 1
-*helppanel.shadowThickness: 1
-*toolBarFrame.marginWidth: 2
-*statusline*shadowThickness: 1
-
-!!! prevent the Motif file selector widget from resizing itself, and start with a reasonable default:
-*resizePolicy: XmRESIZE_NONE
-*textColumns: 50
-
-!!! make all text/entry fields white, for better contrasts:
-*XmDialogShell*XmTextField.background: white
-*XmDialogShell*XmText.background: white
-*XmDialogShell*XmList.background: white
-
-!!! adjust position of header in help window
-*help_window*right_form.topOffset: 10
-
-!!!------------------------------------------------------------------------------
-!!!----------------------------- Preferences window -----------------------------
-!!!------------------------------------------------------------------------------
-
-*XmComboBox*List*background: white
-*XmComboBox*Text*background: white
-*XmComboBox*Text*borderWidth: 2
-*XmComboBox*Text*borderColor: black
-
-!!!------------------------------------------------------------------------------
-!!!--------------------------------- Help window --------------------------------
-!!!------------------------------------------------------------------------------
-!!! (See also the fontList entries for TOPIC_LABEL and TOPIC_HEADING)
-!!!
-!!! Set this to something that fits to your font size:
-*help_text.rows: 23
-*help_text.columns: 56
-
-!!! fg/bg for help topics label
-*help_label*shadowThickness: 2
-!!! ... if you want a more colorful label:
-!*help_label*foreground: blue4
-!*help_label*background: grey90
-
-
-!!! help topics label for Xaw
-*help_label.font: -*-helvetica-bold-r-*-*-14-*-*-*-*-*-*-*
-
-!!!------------------------------------------------------------------------------
-!!!-------------------------------- Motif tooltips ------------------------------
-!!!------------------------------------------------------------------------------
-!!! background color and font:
-*tipShell.background: cornsilk
-*tipShell.fontSet: -*-helvetica-medium-r-*-*-12-*-*-*-*-*-*
-
-!!! time the mouse needs to stay on a button until tooltips pop up,
-!!! in milliseconds; set to a negative value to disable:
-*tipShell.waitPeriod: 800
-
-
-!!!------------------------------------------------------------------------------
-!!!------------------------------ Fonts and colors ------------------------------
-!!!------------------------------------------------------------------------------
-*font: -*-helvetica-medium-r-*-*-12-*-*-*-*-*-*
-!!! Use a smaller font for the statusline in the Xaw version:
-*statusline.font: -*-helvetica-medium-r-*-*-10-*-*-*-*-*-*
-
-!!! Motif fonts. Meaning of the tags is:
-!!! NORMAL: Ordinary text, labels etc.
-!!! UNMARKED: Unmarked entries in page list
-!!! MARKED: Marked entries in page list, emphasized entries in other lists
-!!! TOPIC_LABEL: Label for topics list in help window
-!!! TOPIC_HEADING: Heading for help text in help window
-!!!
-*fontList: \
--*-helvetica-medium-r-*-*-12-*-*-*-*-*-*-*=NORMAL,\
--*-helvetica-medium-r-*-*-12-*-*-*-*-*-*-*=UNMARKED,\
--*-helvetica-bold-r-*-*-12-*-*-*-*-*-*-*=MARKED,\
--*-helvetica-bold-r-*-*-12-*-*-*-*-*-*-*=TOPIC_LABEL,\
--*-helvetica-bold-r-*-*-14-*-*-*-*-*-*-*=TOPIC_HEADING
-
-
-!!! Color used for page border, image bounding boxes and the ruler in `Ruler mode'.
-*highlight: red
-
-!!! Color used for the magnifier and its rulers:
-*rulecolor: blue
-
-!!!------------------------------------------------------------------------------
-!!!---------------------------------- hyperlinks -------------------------------
-!!!------------------------------------------------------------------------------
-
-!!! Colors for unvisited and visited hyperlinks (can be any valid X color spec,
-!!! also in hex format):
-*linkColor: Blue2
-*visitedLinkColor: Purple4
-
-!!! Link style:
-!!! 0: no highlighting at all
-!!! 1: underline with linkColor
-!!! 2: no underlining, text with linkColor
-!!! 3: underlining and text with linkColor
-*linkStyle: 3
-
-!!!------------------------------------------------------------------------------
-!!!------------------------------ helper applications ---------------------------
-!!!------------------------------------------------------------------------------
-
-!!! the editor used for `forward search'; can also be set via $EDITOR, $VISUAL
-!!! or $XEDITOR. Setting the X resource will override the environment variables.
-!!! The format strings `%l' and `%f' are optional.
-!!! You could use this for older emacsen that come with emacsclient:
-!*editor: emacsclient --no-wait +%l %f
-!!! and this for current emacs or xemacs that come with gnuclient (which is much better):
-!*editor: gnuclient -q +%l %f
-
-!!!------------------------------------------------------------------------------
-!!!------------------------------ Xaw buttons and helptexts ---------------------
-!!!------------------------------------------------------------------------------
-
-!!! The following sections are of a more esoteric nature, giving
-!!! examples for customizing the Xaw buttons and the help texts.
-!!! Maybe these are useful for i18n.
-
-!!!------------------------------
-!!! This is the default Xaw button configuration:
-!!!------------------------------
-! *buttonTranslations: \
-! File_Open ...:select-dvi-file()\n\
-! File_Reload:reread-dvi-file()\n\
-! File_Back Hyperref:htex-back()\n\
-! File_Quit:quit()\n\
-! Page_First page:goto-page(1)\n\
-! Page_Page-10:back-page(10)\n\
-! Page_Page-5:back-page(10)\n\
-! Page_Prev:back-page(1)\n\
-! Page_Next:forward-page(1)\n\
-! Page_Page+5:forward-page(5)\n\
-! Page_Page+10:forward-page(10)\n\
-! Page_Last page:goto-page()\n\
-! Zoom_Full size:set-shrink-factor(1)\n\
-! Zoom_$%%:shrink-to-dpi(150)\n\
-! Zoom_$%%:shrink-to-dpi(100)\n\
-! Zoom_$%%:shrink-to-dpi(50)\n\
-! Zoom_Fit in window:set-shrink-factor()\n\
-! Options_View PS:set-ps(toggle)\n\
-! Options_Keep position:set-keep-flag()\n\
-! Help_About ...:popup-help(helpGeneral)\n\
-! Help_Page Motion ...:popup-help(helpPagemotion)\n\
-! Help_Other Commands ...:popup-help(helpOthercommands)\n\
-! Help_HyperTeX commands ...:popup-help(helpHypertex)\n\
-! Help_Source specials ...:popup-help(helpSourcespecials)\n
-
-!!!------------------------------
-!!! help texts
-!!!------------------------------
-
-!!!------------------------------
-!!! about/general
-!!!------------------------------
-! *.helpGeneral: \
-! \n\
-! This is xdvik, CVS version.\n\
-! \n\
-! The xdvik project homepage is located at\n\
-! http://sourceforge.net/projects/xdvi,\n\
-! where you can find updates, report bugs and submit feature requests.\n\
-! \n\
-! Getting help and exiting xdvi\n\
-! \n\
-! h or ? or `Help' button\n\
-! Displays this help text.\n\
-! \n\
-! q or Control-C or Control-D or Cancel or Stop or Control-Z (VAX VMS)\n\
-! Quits the program.\n
-!
-
-!!!------------------------------
-!!! other commands
-!!!------------------------------
-! *helpOthercommands: \
-! \n\
-! Other Commands\n\
-! \n\
-! \n\
-! Control-F\n\
-! Find another DVI file.\n\
-! \n\
-! Control-L or Clear\n\
-! Redisplays the current page.\n\
-! \n\
-! Control-P\n\
-! Prints bitmap unit, bit order, and byte order.\n\
-! \n\
-! ^ or Home\n\
-! Move to the ``home'' position of the page. This is\n\
-! normally the upper left-hand corner of the page,\n\
-! depending on the margins as described in the -margins\n\
-! option, above.\n\
-! \n\
-! c Moves the page so that the point currently beneath the\n\
-! cursor is moved to the middle of the window. It also\n\
-! (gasp!) warps the cursor to the same place.\n\
-! \n\
-! G This key toggles the use of greyscale anti-aliasing for\n\
-! displaying shrunken bitmaps. In addition, the key\n\
-! sequences `0G' and `1G' clear and set this flag,\n\
-! respectively. See also the -nogrey option.\n\
-! \n\
-! k Normally when xdvi switches pages, it moves to the home\n\
-! position as well. The `k' keystroke toggles a `keep-\n\
-! position' flag which, when set, will keep the same\n\
-! position when moving between pages. Also `0k' and `1k'\n\
-! clear and set this flag, respectively. See also the\n\
-! -keep option.\n\
-! \n\
-! M Sets the margins so that the point currently under the\n\
-! cursor is the upper left-hand corner of the text in the\n\
-! page. Note that this command itself does not move the\n\
-! image at all. For details on how the margins are used,\n\
-! see the -margins option.\n\
-! \n\
-! P ``This is page number n.'' This can be used to make\n\
-! the `g' keystroke refer to actual page numbers instead\n\
-! of absolute page numbers.\n\
-! \n\
-! R Forces the dvi file to be reread. This allows you to\n\
-! preview many versions of the same file while running\n\
-! xdvi only once.\n\
-! \n\
-! s Changes the shrink factor to the given number. If no\n\
-! number is given, the smallest factor that makes the\n\
-! entire page fit in the window will be used. (Margins\n\
-! are ignored in this computation.)\n\
-! \n\
-! S Sets the density factor to be used when shrinking\n\
-! bitmaps. This should be a number between 0 and 100;\n\
-! higher numbers produce lighter characters.\n\
-! \n\
-! t Toggles to the next unit in a sorted list of TeX dimension\n\
-! units for the popup magnifier ruler.\n\
-! \n\
-! V Toggles Ghostscript anti-aliasing. Also `0V' and `1V' clear\n\
-! and enables this mode, respectively. See also the the\n\
-! -gsalpha option.\n\
-! \n\
-! x Toggles expert mode (in which the buttons do not appear).\n\
-! `1x' toggles display of the statusline at the bottom of\n\
-! the window.\n
-
-!!!------------------------------
-!!! page motion
-!!!------------------------------
-! *helpPagemotion: \
-! \n\
-! Moving around in the document\n\
-! \n\
-! \n\
-! \n\
-! n or f or Space or Return or LineFeed or PgDn\n\
-! Moves to the next page (or to the nth next page if a\n\
-! number is given).\n\
-! \n\
-! p or b or Control-H or BackSpace or DELete or PgUp\n\
-! Moves to the previous page (or back n pages).\n\
-! \n\
-! u or Up-arrow\n\
-! Moves up two thirds of a window-full.\n\
-! \n\
-! d or Down-arrow\n\
-! Moves down two thirds of a window-full.\n\
-! \n\
-! l or Left-arrow\n\
-! Moves left two thirds of a window-full.\n\
-! \n\
-! r or Right-arrow\n\
-! Moves right two thirds of a window-full.\n\
-! \n\
-! g or j or End\n\
-! Moves to the page with the given number. Initially,\n\
-! the first page is assumed to be page number 1, but this\n\
-! can be changed with the `P' keystroke, below. If no\n\
-! page number is given, then it goes to the last page.\n\
-! \n\
-! < Move to first page in document.\n\
-! > Move to last page in document.\n
-
-!!!------------------------------
-!!! end of helptexts
-!!!------------------------------
-
-
-!!!------------------------------------------------------------------------------
-!!!-------------- used for internal checking - DO NOT CHANGE THIS! --------------
-!!!------------------------------------------------------------------------------
-*appDefaultsFileVersion: 20030303
# Change the window title of X terminals
case ${TERM} in
- xterm*|rxvt*|Eterm|aterm|kterm|gnome*|interix)
+ xterm*|rxvt*|Eterm*|aterm|kterm|gnome*|interix)
PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\007"'
;;
- screen)
+ screen*)
PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\033\\"'
;;
esac
fi
alias ls='ls --color=auto'
- #alias grep='grep --colour=auto'
+ alias grep='grep --colour=auto'
+ alias egrep='egrep --colour=auto'
+ alias fgrep='fgrep --colour=auto'
else
if [[ ${EUID} == 0 ]] ; then
# show root@ when we don't have colors
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
-## Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##
## Contact the author at:
## Jens Berger
# look at the examples of their use.
#
# Please also note that if you specify a list-keyword twice, we'll
-# concatenate the lists. If you you specify a item-keyword twice,
-# we'll kill the previous value.
+# concatenate the lists. If you specify a item-keyword twice, we'll
+# kill the previous value.
#
# We are slightly context-sensitive when detecting tokens like "}"
# and "]"; they have to be preceded by a space. This generally makes
# Quick summary of keywords follows. Keywords marked with a * accept
# keywords accepting case-insensitive lists.
#
-# Abbrev* - A list of abbreviations not automatically catched.
+# Abbrev* - A list of abbreviations not automatically caught.
# CenterDots - Commands/characters which should have \cdots in
# between.
# CmdLine - Default commandline options. These will be
# processed before the ones you give on the command
# line.
# HyphDash \
-# NumDash - No. of dashes allowed in different contexts.
+# NumDash - Number of dashes allowed in different contexts.
# WordDash /
# IJAccent - Commands which puts an accent _over_ their
# argument.
# LowDots - Commands/characters which should have \ldots in
# between.
# MathEnvir - Environments which turn on math mode.
+# MathCmd - Commands which turn on math mode.
+# TextCmd - Commands which turn off math mode.
# MathRoman - Mathematical operators with LaTeX replacement
# defined.
-# NoCharNext - Insists on that certain commands aren't followed by
+# NoCharNext - Insists on that certain commands aren't followed by
# certain characters.
# NonItalic - Commands immediately turning off italic mode.
# NotPreSpaced- Commands which should not have a space in front of
#
# These patterns will be searched for through the text; no matter
# whether they appear as normal text, commands or whatever.
-# Currently case-sensitive.
+# Currently case-sensitive. They are not found in comments.
#
# I usually define a special command like this:
#
]
+
+###
+#
+# These patterns will be searched for, no matter whether they appear
+# as normal text, commands or arguments. However, they will _not_
+# match in verbatim environments.
+#
+# Remember that you have to escape (with a !) the following
+# characters: "#!= as well as spaces and {}[] if they are proceeded by
+# a space.
+#
+# Since these are PCRE regular expressions, you can use (?i) to make
+# the expression case insensitive. See the man pages (man pcresyntax)
+# or the nicely formatted http://perldoc.perl.org/perlre.html for
+# documentation on the regular expression syntax. Note however that
+# some the features of perl regular expression are not available such
+# as running code (callouts), and replacing.
+#
+# An initial PCRE comment (?# ... ) can be used change what is
+# displayed, thereby reminding yourself how to fix the problem.
+#
+###
+UserWarnRegex
+{
+
+ (?!#Always! use! \nmid)\\not! *(\||\\mid)
+
+ # capitalize section when saying Section 6.
+ (?!#-1:Capitalize! before! references)PCRE:\b(chapter|(sub)?section|theorem|lemma|proposition|corollary|appendix)~\\ref
+ (?!#1:Capitalize! before! references)POSIX:([^[:alnum:]]|^)(chapter|(sub)?section|theorem|lemma|proposition|corollary|appendix)~\\ref
+
+ # spell it out.
+ PCRE:(?i)\bintro\b(?!#Spell! it! out.! This! comment! is! not! used.)
+ POSIX:([^[:alnum:]]|^)intro([^[:alnum:]]|$)
+
+ # Pretty tables--see http://texdoc.net/texmf-dist/doc/latex/booktabs/booktabs.pdf
+ (?!#-2:Use! \toprule,! midrule,! or! \bottomrule! from! booktabs)\\hline
+ # This relies on it being on a single line, and not having anything
+ # else on that line. With PCRE we could match balanced [] and {},
+ # but I wonder if it's worth the complexity...
+ (?!#-2:Vertical! rules! in! tables! are! ugly)\\begin\{(array|tabularx?\*?)\}(\[.*\])?\{.*\|.*\}
+
+}
+
+
#####################################################################
#
# Here you can list the path of where ChkTeX should look for files it
#####################################################################
#
-# Here you may specify more outputformats for use with the -v option,
+# Here you may specify more output formats for use with the -v option,
# it simply indexes into this list. Remember to use ! instead of \,
# though.
#
-# For explanation of how % fields expand; look at ChkTeX.{dvi,ps}.
+# For explanation of how % fields expand; look at ChkTeX.{dvi,ps,pdf}.
#
# We will by default select entry number _two_ in this list (we count
# from 0), and -v without any parameter selects entry number _three_.
# -v5; no line number, ease auto-test
"%k %n in %f: %m!n%r%s%t!n%u!n"
+# -v6; emacs compilation mode
+"!"%f!", line %l.%c:(#%n) %m!n"
+
}
#####################################################################
#
-# These commands should be ignored when detecting whether a command
-# is ended by a space.
+# These commands should be ignored when detecting whether a command
+# is ended by a space. You can specify regular expressions in the []
+# section in case you have many custom macros that can be safely
+# terminated with a space.
#
Silent
\textwidth \textheight \hsize \vsize
- \if \fi
+ \if \fi \else
\csname \endcsname
\z@ \p@ \@warning \typeout
\dots \ldots \input \endinput \nextline \leavevmode \cdots
-- \appendix \listfiles \and \quad
- \vfill \vfil \hfill \hfil \topmargin \oddsidemargin
+ \appendix \listfiles \and \quad
+ \hskip \vfill \vfil \hfill \hfil \topmargin \oddsidemargin
\frenchspacing \nonfrenchspacing
\begingroup \endgroup \par
\vrefwarning \upshape \headheight \headsep \hoffset \voffset
\cdot \qquad
\left \right
-}
+ \qedhere
+
+ \xspace
+
+ \addlinespace \cr \fill \frontmatter
+ \toprule \midrule \bottomrule
+
+}[
+# Here you can put regular expressions to match Silent macros. It was
+# designed for the case where you have many custom macros sharing a
+# common prefix, but can of course be used for other things.
+
+# \\my.*
+]
#####################################################################
#
# Here, you can specify the length of various dashes. We sort the
# dash according to which type of characters that are on the left and
-# right of of it. We are only conclusive if they are the same.
+# right of it. We are only conclusive if they are the same.
#
# We associate as follows:
#
# WordDash Space (like this --- see?)
#
# Below you specify how many dashes which are legal in each case. We
-# define 0 as an magic constant which always generates an error. You
+# define 0 as a magic constant which always generates an error. You
# may specify more than one legal dash-length.
#
# Let's look at an example. You use the following dash-syntax:
#####################################################################
#
-# This keyword indicates commands which argument isn't LaTeX code,
-# and which thus should be ignored.
+# This keyword indicates commands whose argument isn't LaTeX code,
+# and thus should be ignored.
#
-# After the command, you may place arguments that you wish that
-# should be wiped in the process; use [] for optional arguments, {}
-# for required ones and * if the command supports an alternative
-# variant. These should be separated from the command with a colon.
+# After the command, you may place arguments that you wish that
+# should be wiped in the process; use [] for optional arguments, {}
+# for required ones and * if the command supports an alternative
+# variant. These should be separated from the command with a colon.
+# Some commands (e.g. \cmidrule) use () to delimit and optional
+# argument and so this syntax is supported as well.
#
# For instance, if you would like to wipe the \newcommand command,
# you would declare it as \newcommand:*[][]{}
WipeArg
{
- \label:{} \ref:{} \vref:{} \pageref:{} \index:{} \cite:[]{}
+ \label:{} \ref:{} \eqref:{} \vref:{} \pageref:{} \index:[]{}
+ \cite:[]{} \nocite:{}
\input:{} \verbatiminput:[]{} \listinginput:[]{}{}
- \verbatimtabinput:[]{} \include:{} \includeonly:{}
+ \verbatimtabinput:[]{} \include:{} \includeonly:{}
\bibitem:[]{}
+ \cline:{} \cmidrule:[](){}
+ \href:{}{}
+ # Cleveref -- there are many others that could be here as well...
+ \cref:*{} \cpageref:*{} \crefrange:*{}{} \cpagerefrange:*{}{}
+ \Cref:*{} \Cpageref:*{} \Crefrange:*{}{} \Cpagerefrange:*{}{}
+ # natbib
+ \citet:*[][]{} \citep:*[][]{} \citealt:*{} \citealp:*[]{} \citeauthor:*{}
+ \Citet:*[][]{} \Citep:*[][]{} \Citealt:*{} \Citealp:*[]{} \Citeauthor:{}
+ \citetext:{} \citeyear:*{} \citeyearpar:{}
}
#####################################################################
#
-# These environments contains material which will be typeset as
+# These environments contain material which will be typeset as
# mathematics by LaTeX. This turns on/off some warnings.
#
# We will automagically append a * to each keyword.
align alignat gather flalign multline
}
+#####################################################################
+#
+# These commands contain material which will be typeset as mathematics
+# by LaTeX. The commands are assumed to have one mandatory argument
+# which is in math mode. This turns on/off some warnings.
+#
+
+MathCmd
+{
+ \ensuremath
+}
+
+#####################################################################
+#
+# These commands contain material which will _not_ be typeset as
+# mathematics by LaTeX even if it would otherwise be in mathmode. The
+# commands are assumed to have one mandatory argument which is in text
+# mode. This turns on/off some warnings.
+#
+
+TextCmd
+{
+ \text \intertext \shortintertext \mbox
+}
+
#####################################################################
#
# These environments contains material which contents should be
VerbEnvir
{
verbatim comment listing verbatimtab rawhtml errexam picture texdraw
+ filecontents pgfpicture tikzpicture
}
#####################################################################
# by Russ Bubley, <russ@scs.leeds.ac.uk>.
#
-
Abbrev
{
# Ordinals
#####################################################################
#
-# Commands which puts their argument into italic (and thus possibly
+# Commands which put their argument into italic (and thus possibly
# needs italic correction in the end).
#
-# This is currently empty, since \textit, \textsl and \emph do that
+# This is currently empty, since \textit, \textsl and \emph do that
# automatically.
#
Linker
{
- \ref \vref \pageref \cite
+ \ref \vref \pageref \eqref \cite
}
#####################################################################
#####################################################################
#
-# These TeX commands have become unnecessary, as there are LaTeX cmds
-# that does the same. Purists should thus avoid these in their code.
+# These TeX commands have become unnecessary, as there are LaTeX
+# commands that does the same. Purists should thus avoid these in
+# their code.
#
# (These are a spell-corrected version of those lacheck uses).
#
#
# Format: \command:characters
#
-# We'll emit a warning if any of characters are found after the
+# We'll emit a warning if any of characters are found after the
# command.
#
-NoCharNext
+NoCharNext
{
\left:{}$ \right:{}$
}
#####################################################################
#
# We're killing \verb@...@ commands and the arguments of the commands
-# listed above in WIPEARG by overwriting them with a string or a
+# listed above in WipeArg by overwriting them with a string or a
# single character.
#
-# This should not contain an alphabetic character (in case the user
-# writes (\foo\verb@bar@), neither should it contain be one of LaTeX'
-# reserved characters (`#$%&~_^\{}'), or any parenthesis character
-# ('()[]{}'). If possible, don't use a punctuation character,
-# either, or any spacing character.
+# This should not contain an alphabetic character (in case the user
+# writes (\foo\verb@bar@), neither should it contain be one of
+# LaTeX's reserved characters (`#$%&~_^\{}'), or any parenthesis
+# character ('()[]{}'). If possible, don't use a punctuation
+# character, either, or any spacing character.
#
-# The asterix is also unsuitable, as some commands behave in another
-# way if they are postpended with an asterix. Which more or less
-# leaves us with the pipe.
+# The asterisk is also unsuitable, as some commands behave in another
+# way if they are appended with an asterisk. Which more or less
+# leaves us with the pipe.
#
# Please note that this may also be a _string_, which will be
# repeated until the proper length is reached.
# All for now - have fun.
#
#####################################################################
-
--- /dev/null
+# /etc/conf.d/dropbox.conf: config file for /etc/init.d/dropbox
+
+# Users to run dropbox
+DROPBOX_USERS=""
+
+# integer [-20 .. 19 ] default 0
+# change the priority of the server -20 (high) to 19 (low)
+# see nice(1) for description
+#NICE=0
+
+# See start-stop-daemon(8) for possible settings
+#IONICE=2
+
+PID_DIR=/var/run/dropbox
. /usr/share/mc/mc.gentoo
fi
-#if [ -e /etc/bash_completion.d/git -o "${HOME}"/.bash_completion.d/git ] ; then
-# #echo "/etc/bash_completion.d/git or ${HOME}/.bash_completion.d/git exists ..."
-# if ${use_color} ; then
-# if [ "$UID" = 0 ]; then
-# PS1='$? \[\033[01;31m\]\h\[\033[01;30m\]:\[\033[01;34m\]\w\[\033[01;31m\]$(__git_ps1)\[\033[01;34m\] \$ \[\033[00m\]'
-# else
-# PS1='$? \[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[01;31m\]$(__git_ps1)\[\033[01;34m\] > \[\033[00m\]'
-# fi
-# else
-# if [ "$UID" = 0 ]; then
-# PS1='$? \h:\w$(__git_ps1) \$ '
-# else
-# PS1='$? \u@\h:\w$(__git_ps1) > '
-# fi
-# fi
-#fi
+if [ -e /etc/bash_completion.d/git -o "${HOME}"/.bash_completion.d/git ] ; then
+ #echo "/etc/bash_completion.d/git or ${HOME}/.bash_completion.d/git exists ..."
+ if ${use_color} ; then
+ if [ "$UID" = 0 ]; then
+ PS1='$? \[\033[01;31m\]\h\[\033[01;30m\]:\[\033[01;34m\]\w\[\033[01;31m\]$(__git_ps1)\[\033[01;34m\] \$ \[\033[00m\]'
+ else
+ PS1='$? \[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[01;31m\]$(__git_ps1)\[\033[01;34m\] > \[\033[00m\]'
+ fi
+ else
+ if [ "$UID" = 0 ]; then
+ PS1='$? \h:\w$(__git_ps1) \$ '
+ else
+ PS1='$? \u@\h:\w$(__git_ps1) > '
+ fi
+ fi
+fi
unset use_color
--- /dev/null
+# /etc/bash/bashrc
+#
+# This file is sourced by all *interactive* bash shells on startup,
+# including some apparently interactive shells such as scp and rcp
+# that can't tolerate any output. So make sure this doesn't display
+# anything or bad things will happen !
+
+
+# Test for an interactive shell. There is no need to set anything
+# past this point for scp and rcp, and it's important to refrain from
+# outputting anything in those cases.
+if [[ $- != *i* ]] ; then
+ # Shell is non-interactive. Be done now!
+ return
+fi
+
+# Bash won't get SIGWINCH if another process is in the foreground.
+# Enable checkwinsize so that bash will check the terminal size when
+# it regains control. #65623
+# http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11)
+shopt -s checkwinsize
+
+# Enable history appending instead of overwriting. #139609
+shopt -s histappend
+
+# Change the window title of X terminals
+case ${TERM} in
+ xterm*|rxvt*|Eterm|aterm|kterm|gnome*|interix)
+ PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\007"'
+ ;;
+ screen)
+ PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\033\\"'
+ ;;
+esac
+
+use_color=false
+
+# Set colorful PS1 only on colorful terminals.
+# dircolors --print-database uses its own built-in database
+# instead of using /etc/DIR_COLORS. Try to use the external file
+# first to take advantage of user additions. Use internal bash
+# globbing instead of external grep binary.
+safe_term=${TERM//[^[:alnum:]]/?} # sanitize TERM
+match_lhs=""
+[[ -f ~/.dir_colors ]] && match_lhs="${match_lhs}$(<~/.dir_colors)"
+[[ -f /etc/DIR_COLORS ]] && match_lhs="${match_lhs}$(</etc/DIR_COLORS)"
+[[ -z ${match_lhs} ]] \
+ && type -P dircolors >/dev/null \
+ && match_lhs=$(dircolors --print-database)
+[[ $'\n'${match_lhs} == *$'\n'"TERM "${safe_term}* ]] && use_color=true
+
+if ${use_color} ; then
+ # Enable colors for ls, etc. Prefer ~/.dir_colors #64489
+ if type -P dircolors >/dev/null ; then
+ if [[ -f ~/.dir_colors ]] ; then
+ eval $(dircolors -b ~/.dir_colors)
+ elif [[ -f /etc/DIR_COLORS ]] ; then
+ eval $(dircolors -b /etc/DIR_COLORS)
+ fi
+ fi
+
+ if [[ ${EUID} == 0 ]] ; then
+ #PS1='\[\033[01;31m\]\h\[\033[01;34m\] \W \$\[\033[00m\] '
+ PS1='$? \[\033[01;31m\]\h\[\033[01;30m\]:\[\033[01;34m\]\w \$ \[\033[00m\]'
+ else
+ #PS1='\[\033[01;32m\]\u@\h\[\033[01;34m\] \w \$\[\033[00m\] '
+ PS1='$? \[\033[01;32m\]\u@\h\[\033[01;30m\]:\[\033[01;34m\]\w > \[\033[00m\]'
+ fi
+
+ alias ls='ls --color=auto'
+ #alias grep='grep --colour=auto'
+else
+ if [[ ${EUID} == 0 ]] ; then
+ # show root@ when we don't have colors
+ PS1='\u@\h \W \$ '
+ else
+ PS1='\u@\h \w \$ '
+ fi
+fi
+
+# Try to keep environment pollution down, EPA loves us.
+unset safe_term match_lhs
+
+if [ -d /usr/scripts ] ; then
+ export PATH="/usr/scripts:${PATH}"
+fi
+
+if [ -d "${HOME}/bin" ] ; then
+ export PATH="${PATH}:${HOME}/bin"
+fi
+
+if [ -d "$HOME/lib" ] ; then
+ if [ -d "$HOME/lib/perl" ] ; then
+ if [ -z "${PERL5LIB}" ] ; then
+ export PERL5LIB="$HOME/lib/perl"
+ else
+ export PERL5LIB="$HOME/lib/perl:${PERL5LIB}"
+ fi
+ fi
+ if [ -d "$HOME/lib/python" ] ; then
+ if [ -z "${PYTHONPATH}" ] ; then
+ export PYTHONPATH="$HOME/lib/python"
+ else
+ export PYTHONPATH="$HOME/lib/python:${PYTHONPATH}"
+ fi
+ fi
+fi
+
+
+#if [[ ${EUID} == 0 ]] ; then
+# alias ll="ls -lA"
+#else
+# alias ll="ls -l"
+#fi
+alias l="ls -l"
+alias ll="ls -lA"
+alias la="ls -la"
+alias md=mkdir
+alias rd=rmdir
+alias ..='cd ..'
+alias ...='cd ../..'
+alias cd..='cd ..'
+alias cd...='cd ../..'
+alias pl="ps -fu $USER"
+
+lcd() {
+ cd $( perl -e '
+use strict;
+use Cwd;
+my $new = shift;
+my $cwd = Cwd::abs_path(getcwd());
+my $newa = $cwd;
+if ($new){
+ $newa = Cwd::abs_path($new);
+ $newa = $cwd unless $newa;
+};
+printf("%s\n", $newa);
+' $1 )
+}
+
+export LESS="-R -M -I --shift 5"
+export LESSCHARSET="utf-8"
+
+HISTCONTROL=ignoreboth
+HISTSIZE=50000
+HISTFILESIZE=50000
+HISTTIMEFORMAT='%Y-%m-%d %H:%M:%S '
+
+if [ -f /usr/share/mc/mc.gentoo ]; then
+ . /usr/share/mc/mc.gentoo
+fi
+
+#if [ -e /etc/bash_completion.d/git -o "${HOME}"/.bash_completion.d/git ] ; then
+# #echo "/etc/bash_completion.d/git or ${HOME}/.bash_completion.d/git exists ..."
+# if ${use_color} ; then
+# if [ "$UID" = 0 ]; then
+# PS1='$? \[\033[01;31m\]\h\[\033[01;30m\]:\[\033[01;34m\]\w\[\033[01;31m\]$(__git_ps1)\[\033[01;34m\] \$ \[\033[00m\]'
+# else
+# PS1='$? \[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[01;31m\]$(__git_ps1)\[\033[01;34m\] > \[\033[00m\]'
+# fi
+# else
+# if [ "$UID" = 0 ]; then
+# PS1='$? \h:\w$(__git_ps1) \$ '
+# else
+# PS1='$? \u@\h:\w$(__git_ps1) > '
+# fi
+# fi
+#fi
+
+unset use_color
+
+# vim: ts=4 expandtab
--- /dev/null
+# /etc/bash/bashrc
+#
+# This file is sourced by all *interactive* bash shells on startup,
+# including some apparently interactive shells such as scp and rcp
+# that can't tolerate any output. So make sure this doesn't display
+# anything or bad things will happen !
+
+
+# Test for an interactive shell. There is no need to set anything
+# past this point for scp and rcp, and it's important to refrain from
+# outputting anything in those cases.
+if [[ $- != *i* ]] ; then
+ # Shell is non-interactive. Be done now!
+ return
+fi
+
+# Bash won't get SIGWINCH if another process is in the foreground.
+# Enable checkwinsize so that bash will check the terminal size when
+# it regains control. #65623
+# http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11)
+shopt -s checkwinsize
+
+# Enable history appending instead of overwriting. #139609
+shopt -s histappend
+
+# Change the window title of X terminals
+case ${TERM} in
+ xterm*|rxvt*|Eterm*|aterm|kterm|gnome*|interix)
+ PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\007"'
+ ;;
+ screen*)
+ PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\033\\"'
+ ;;
+esac
+
+use_color=false
+
+# Set colorful PS1 only on colorful terminals.
+# dircolors --print-database uses its own built-in database
+# instead of using /etc/DIR_COLORS. Try to use the external file
+# first to take advantage of user additions. Use internal bash
+# globbing instead of external grep binary.
+safe_term=${TERM//[^[:alnum:]]/?} # sanitize TERM
+match_lhs=""
+[[ -f ~/.dir_colors ]] && match_lhs="${match_lhs}$(<~/.dir_colors)"
+[[ -f /etc/DIR_COLORS ]] && match_lhs="${match_lhs}$(</etc/DIR_COLORS)"
+[[ -z ${match_lhs} ]] \
+ && type -P dircolors >/dev/null \
+ && match_lhs=$(dircolors --print-database)
+[[ $'\n'${match_lhs} == *$'\n'"TERM "${safe_term}* ]] && use_color=true
+
+if ${use_color} ; then
+ # Enable colors for ls, etc. Prefer ~/.dir_colors #64489
+ if type -P dircolors >/dev/null ; then
+ if [[ -f ~/.dir_colors ]] ; then
+ eval $(dircolors -b ~/.dir_colors)
+ elif [[ -f /etc/DIR_COLORS ]] ; then
+ eval $(dircolors -b /etc/DIR_COLORS)
+ fi
+ fi
+
+ if [[ ${EUID} == 0 ]] ; then
+ PS1='\[\033[01;31m\]\h\[\033[01;34m\] \W \$\[\033[00m\] '
+ else
+ PS1='\[\033[01;32m\]\u@\h\[\033[01;34m\] \w \$\[\033[00m\] '
+ fi
+
+ alias ls='ls --color=auto'
+ alias grep='grep --colour=auto'
+ alias egrep='egrep --colour=auto'
+ alias fgrep='fgrep --colour=auto'
+else
+ if [[ ${EUID} == 0 ]] ; then
+ # show root@ when we don't have colors
+ PS1='\u@\h \W \$ '
+ else
+ PS1='\u@\h \w \$ '
+ fi
+fi
+
+# Try to keep environment pollution down, EPA loves us.
+unset use_color safe_term match_lhs
+++ /dev/null
-# /etc/bash/bashrc
-#
-# This file is sourced by all *interactive* bash shells on startup,
-# including some apparently interactive shells such as scp and rcp
-# that can't tolerate any output. So make sure this doesn't display
-# anything or bad things will happen !
-
-
-# Test for an interactive shell. There is no need to set anything
-# past this point for scp and rcp, and it's important to refrain from
-# outputting anything in those cases.
-if [[ $- != *i* ]] ; then
- # Shell is non-interactive. Be done now!
- return
-fi
-
-# Bash won't get SIGWINCH if another process is in the foreground.
-# Enable checkwinsize so that bash will check the terminal size when
-# it regains control. #65623
-# http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11)
-shopt -s checkwinsize
-
-# Enable history appending instead of overwriting. #139609
-shopt -s histappend
-
-# Change the window title of X terminals
-case ${TERM} in
- xterm*|rxvt*|Eterm|aterm|kterm|gnome*|interix)
- PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\007"'
- ;;
- screen)
- PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\033\\"'
- ;;
-esac
-
-use_color=false
-
-# Set colorful PS1 only on colorful terminals.
-# dircolors --print-database uses its own built-in database
-# instead of using /etc/DIR_COLORS. Try to use the external file
-# first to take advantage of user additions. Use internal bash
-# globbing instead of external grep binary.
-safe_term=${TERM//[^[:alnum:]]/?} # sanitize TERM
-match_lhs=""
-[[ -f ~/.dir_colors ]] && match_lhs="${match_lhs}$(<~/.dir_colors)"
-[[ -f /etc/DIR_COLORS ]] && match_lhs="${match_lhs}$(</etc/DIR_COLORS)"
-[[ -z ${match_lhs} ]] \
- && type -P dircolors >/dev/null \
- && match_lhs=$(dircolors --print-database)
-[[ $'\n'${match_lhs} == *$'\n'"TERM "${safe_term}* ]] && use_color=true
-
-if ${use_color} ; then
- # Enable colors for ls, etc. Prefer ~/.dir_colors #64489
- if type -P dircolors >/dev/null ; then
- if [[ -f ~/.dir_colors ]] ; then
- eval $(dircolors -b ~/.dir_colors)
- elif [[ -f /etc/DIR_COLORS ]] ; then
- eval $(dircolors -b /etc/DIR_COLORS)
- fi
- fi
-
- if [[ ${EUID} == 0 ]] ; then
- PS1='\[\033[01;31m\]\h\[\033[01;34m\] \W \$\[\033[00m\] '
- else
- PS1='\[\033[01;32m\]\u@\h\[\033[01;34m\] \w \$\[\033[00m\] '
- fi
-
- alias ls='ls --color=auto'
- alias grep='grep --colour=auto'
- alias egrep='egrep --colour=auto'
- alias fgrep='fgrep --colour=auto'
-else
- if [[ ${EUID} == 0 ]] ; then
- # show root@ when we don't have colors
- PS1='\u@\h \W \$ '
- else
- PS1='\u@\h \w \$ '
- fi
-fi
-
-# Try to keep environment pollution down, EPA loves us.
-unset use_color safe_term match_lhs
--- /dev/null
+# We always try and start X on a static VT. The various DMs normally default
+# to using VT7. If you wish to use the xdm init script, then you should ensure
+# that the VT checked is the same VT your DM wants to use. We do this check to
+# ensure that you haven't accidentally configured something to run on the VT
+# in your /etc/inittab file so that you don't get a dead keyboard.
+CHECKVT=7
+
+# What display manager do you use ? [ xdm | gdm | kdm | gpe | entrance ]
+# NOTE: If this is set in /etc/rc.conf, that setting will override this one.
+#DISPLAYMANAGER="xdm"
+DISPLAYMANAGER="gdm"
--- /dev/null
+# We always try and start X on a static VT. The various DMs normally default
+# to using VT7. If you wish to use the xdm init script, then you should ensure
+# that the VT checked is the same VT your DM wants to use. We do this check to
+# ensure that you haven't accidentally configured something to run on the VT
+# in your /etc/inittab file so that you don't get a dead keyboard.
+CHECKVT=7
+
+# What display manager do you use ? [ xdm | gdm | kdm | gpe | entrance ]
+# NOTE: If this is set in /etc/rc.conf, that setting will override this one.
+DISPLAYMANAGER="xdm"
--- /dev/null
+/var/log/libvirt/libvirtd.log {
+ weekly
+ missingok
+ rotate 4
+ compress
+ delaycompress
+ copytruncate
+ size 100k
+}
--- /dev/null
+/var/log/libvirt/libvirtd.log {
+ weekly
+ missingok
+ rotate 4
+ compress
+ delaycompress
+ copytruncate
+ minsize 100k
+}
--- /dev/null
+/var/log/libvirt/lxc/*.log {
+ weekly
+ missingok
+ rotate 4
+ compress
+ delaycompress
+ copytruncate
+ size 100k
+}
--- /dev/null
+/var/log/libvirt/lxc/*.log {
+ weekly
+ missingok
+ rotate 4
+ compress
+ delaycompress
+ copytruncate
+ minsize 100k
+}
--- /dev/null
+/var/log/libvirt/qemu/*.log {
+ weekly
+ missingok
+ rotate 4
+ compress
+ delaycompress
+ copytruncate
+ size 100k
+}
--- /dev/null
+/var/log/libvirt/qemu/*.log {
+ weekly
+ missingok
+ rotate 4
+ compress
+ delaycompress
+ copytruncate
+ minsize 100k
+}
--- /dev/null
+/var/log/libvirt/uml/*.log {
+ weekly
+ missingok
+ rotate 4
+ compress
+ delaycompress
+ copytruncate
+ size 100k
+}
--- /dev/null
+/var/log/libvirt/uml/*.log {
+ weekly
+ missingok
+ rotate 4
+ compress
+ delaycompress
+ copytruncate
+ minsize 100k
+}
--- /dev/null
+# Global Postfix configuration file. This file lists only a subset
+# of all parameters. For the syntax, and for a complete parameter
+# list, see the postconf(5) manual page (command: "man 5 postconf").
+#
+# For common configuration examples, see BASIC_CONFIGURATION_README
+# and STANDARD_CONFIGURATION_README. To find these documents, use
+# the command "postconf html_directory readme_directory", or go to
+# http://www.postfix.org/.
+#
+# For best results, change no more than 2-3 parameters at a time,
+# and test if Postfix still works after every change.
+
+# SOFT BOUNCE
+#
+# The soft_bounce parameter provides a limited safety net for
+# testing. When soft_bounce is enabled, mail will remain queued that
+# would otherwise bounce. This parameter disables locally-generated
+# bounces, and prevents the SMTP server from rejecting mail permanently
+# (by changing 5xx replies into 4xx replies). However, soft_bounce
+# is no cure for address rewriting mistakes or mail routing mistakes.
+#
+#soft_bounce = no
+
+# LOCAL PATHNAME INFORMATION
+#
+# The queue_directory specifies the location of the Postfix queue.
+# This is also the root directory of Postfix daemons that run chrooted.
+# See the files in examples/chroot-setup for setting up Postfix chroot
+# environments on different UNIX systems.
+#
+queue_directory = /var/spool/postfix
+
+# The command_directory parameter specifies the location of all
+# postXXX commands.
+#
+command_directory = /usr/sbin
+
+# The daemon_directory parameter specifies the location of all Postfix
+# daemon programs (i.e. programs listed in the master.cf file). This
+# directory must be owned by root.
+#
+daemon_directory = /usr/libexec/postfix
+
+# The data_directory parameter specifies the location of Postfix-writable
+# data files (caches, random numbers). This directory must be owned
+# by the mail_owner account (see below).
+#
+data_directory = /var/lib/postfix
+
+# QUEUE AND PROCESS OWNERSHIP
+#
+# The mail_owner parameter specifies the owner of the Postfix queue
+# and of most Postfix daemon processes. Specify the name of a user
+# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
+# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
+# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
+# USER.
+#
+mail_owner = postfix
+
+# The default_privs parameter specifies the default rights used by
+# the local delivery agent for delivery to external file or command.
+# These rights are used in the absence of a recipient user context.
+# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
+#
+#default_privs = nobody
+
+# INTERNET HOST AND DOMAIN NAMES
+#
+# The myhostname parameter specifies the internet hostname of this
+# mail system. The default is to use the fully-qualified domain name
+# from gethostname(). $myhostname is used as a default value for many
+# other configuration parameters.
+#
+#myhostname = host.domain.tld
+#myhostname = virtual.domain.tld
+
+# The mydomain parameter specifies the local internet domain name.
+# The default is to use $myhostname minus the first component.
+# $mydomain is used as a default value for many other configuration
+# parameters.
+#
+#mydomain = domain.tld
+
+# SENDING MAIL
+#
+# The myorigin parameter specifies the domain that locally-posted
+# mail appears to come from. The default is to append $myhostname,
+# which is fine for small sites. If you run a domain with multiple
+# machines, you should (1) change this to $mydomain and (2) set up
+# a domain-wide alias database that aliases each user to
+# user@that.users.mailhost.
+#
+# For the sake of consistency between sender and recipient addresses,
+# myorigin also specifies the default domain name that is appended
+# to recipient addresses that have no @domain part.
+#
+#myorigin = $myhostname
+#myorigin = $mydomain
+
+# RECEIVING MAIL
+
+# The inet_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on. By default,
+# the software claims all active interfaces on the machine. The
+# parameter also controls delivery of mail to user@[ip.address].
+#
+# See also the proxy_interfaces parameter, for network addresses that
+# are forwarded to us via a proxy or network address translator.
+#
+# Note: you need to stop/start Postfix when this parameter changes.
+#
+#inet_interfaces = all
+#inet_interfaces = $myhostname
+#inet_interfaces = $myhostname, localhost
+
+# The proxy_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on by way of a
+# proxy or network address translation unit. This setting extends
+# the address list specified with the inet_interfaces parameter.
+#
+# You must specify your proxy/NAT addresses when your system is a
+# backup MX host for other domains, otherwise mail delivery loops
+# will happen when the primary MX host is down.
+#
+#proxy_interfaces =
+#proxy_interfaces = 1.2.3.4
+
+# The mydestination parameter specifies the list of domains that this
+# machine considers itself the final destination for.
+#
+# These domains are routed to the delivery agent specified with the
+# local_transport parameter setting. By default, that is the UNIX
+# compatible delivery agent that lookups all recipients in /etc/passwd
+# and /etc/aliases or their equivalent.
+#
+# The default is $myhostname + localhost.$mydomain. On a mail domain
+# gateway, you should also include $mydomain.
+#
+# Do not specify the names of virtual domains - those domains are
+# specified elsewhere (see VIRTUAL_README).
+#
+# Do not specify the names of domains that this machine is backup MX
+# host for. Specify those names via the relay_domains settings for
+# the SMTP server, or use permit_mx_backup if you are lazy (see
+# STANDARD_CONFIGURATION_README).
+#
+# The local machine is always the final destination for mail addressed
+# to user@[the.net.work.address] of an interface that the mail system
+# receives mail on (see the inet_interfaces parameter).
+#
+# Specify a list of host or domain names, /file/name or type:table
+# patterns, separated by commas and/or whitespace. A /file/name
+# pattern is replaced by its contents; a type:table is matched when
+# a name matches a lookup key (the right-hand side is ignored).
+# Continue long lines by starting the next line with whitespace.
+#
+# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
+#
+#mydestination = $myhostname, localhost.$mydomain, localhost
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
+# mail.$mydomain, www.$mydomain, ftp.$mydomain
+
+# REJECTING MAIL FOR UNKNOWN LOCAL USERS
+#
+# The local_recipient_maps parameter specifies optional lookup tables
+# with all names or addresses of users that are local with respect
+# to $mydestination, $inet_interfaces or $proxy_interfaces.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown local users. This parameter is defined by default.
+#
+# To turn off local recipient checking in the SMTP server, specify
+# local_recipient_maps = (i.e. empty).
+#
+# The default setting assumes that you use the default Postfix local
+# delivery agent for local delivery. You need to update the
+# local_recipient_maps setting if:
+#
+# - You define $mydestination domain recipients in files other than
+# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
+# For example, you define $mydestination domain recipients in
+# the $virtual_mailbox_maps files.
+#
+# - You redefine the local delivery agent in master.cf.
+#
+# - You redefine the "local_transport" setting in main.cf.
+#
+# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
+# feature of the Postfix local delivery agent (see local(8)).
+#
+# Details are described in the LOCAL_RECIPIENT_README file.
+#
+# Beware: if the Postfix SMTP server runs chrooted, you probably have
+# to access the passwd file via the proxymap service, in order to
+# overcome chroot restrictions. The alternative, having a copy of
+# the system passwd file in the chroot jail is just not practical.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify a bare username, an @domain.tld
+# wild-card, or specify a user@domain.tld address.
+#
+#local_recipient_maps = unix:passwd.byname $alias_maps
+#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
+#local_recipient_maps =
+
+# The unknown_local_recipient_reject_code specifies the SMTP server
+# response code when a recipient domain matches $mydestination or
+# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
+# and the recipient address or address local-part is not found.
+#
+# The default setting is 550 (reject mail) but it is safer to start
+# with 450 (try again later) until you are certain that your
+# local_recipient_maps settings are OK.
+#
+unknown_local_recipient_reject_code = 550
+
+# TRUST AND RELAY CONTROL
+
+# The mynetworks parameter specifies the list of "trusted" SMTP
+# clients that have more privileges than "strangers".
+#
+# In particular, "trusted" SMTP clients are allowed to relay mail
+# through Postfix. See the smtpd_recipient_restrictions parameter
+# in postconf(5).
+#
+# You can specify the list of "trusted" network addresses by hand
+# or you can let Postfix do it for you (which is the default).
+#
+# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
+# clients in the same IP subnetworks as the local machine.
+# On Linux, this does works correctly only with interfaces specified
+# with the "ifconfig" command.
+#
+# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
+# clients in the same IP class A/B/C networks as the local machine.
+# Don't do this with a dialup site - it would cause Postfix to "trust"
+# your entire provider's network. Instead, specify an explicit
+# mynetworks list by hand, as described below.
+#
+# Specify "mynetworks_style = host" when Postfix should "trust"
+# only the local machine.
+#
+#mynetworks_style = class
+#mynetworks_style = subnet
+#mynetworks_style = host
+
+# Alternatively, you can specify the mynetworks list by hand, in
+# which case Postfix ignores the mynetworks_style setting.
+#
+# Specify an explicit list of network/netmask patterns, where the
+# mask specifies the number of bits in the network part of a host
+# address.
+#
+# You can also specify the absolute pathname of a pattern file instead
+# of listing the patterns here. Specify type:table for table-based lookups
+# (the value on the table right-hand side is not used).
+#
+#mynetworks = 168.100.189.0/28, 127.0.0.0/8
+#mynetworks = $config_directory/mynetworks
+#mynetworks = hash:/etc/postfix/network_table
+
+# The relay_domains parameter restricts what destinations this system will
+# relay mail to. See the smtpd_recipient_restrictions description in
+# postconf(5) for detailed information.
+#
+# By default, Postfix relays mail
+# - from "trusted" clients (IP address matches $mynetworks) to any destination,
+# - from "untrusted" clients to destinations that match $relay_domains or
+# subdomains thereof, except addresses with sender-specified routing.
+# The default relay_domains value is $mydestination.
+#
+# In addition to the above, the Postfix SMTP server by default accepts mail
+# that Postfix is final destination for:
+# - destinations that match $inet_interfaces or $proxy_interfaces,
+# - destinations that match $mydestination
+# - destinations that match $virtual_alias_domains,
+# - destinations that match $virtual_mailbox_domains.
+# These destinations do not need to be listed in $relay_domains.
+#
+# Specify a list of hosts or domains, /file/name patterns or type:name
+# lookup tables, separated by commas and/or whitespace. Continue
+# long lines by starting the next line with whitespace. A file name
+# is replaced by its contents; a type:name table is matched when a
+# (parent) domain appears as lookup key.
+#
+# NOTE: Postfix will not automatically forward mail for domains that
+# list this system as their primary or backup MX host. See the
+# permit_mx_backup restriction description in postconf(5).
+#
+#relay_domains = $mydestination
+
+# INTERNET OR INTRANET
+
+# The relayhost parameter specifies the default host to send mail to
+# when no entry is matched in the optional transport(5) table. When
+# no relayhost is given, mail is routed directly to the destination.
+#
+# On an intranet, specify the organizational domain name. If your
+# internal DNS uses no MX records, specify the name of the intranet
+# gateway host instead.
+#
+# In the case of SMTP, specify a domain, host, host:port, [host]:port,
+# [address] or [address]:port; the form [host] turns off MX lookups.
+#
+# If you're connected via UUCP, see also the default_transport parameter.
+#
+#relayhost = $mydomain
+#relayhost = [gateway.my.domain]
+#relayhost = [mailserver.isp.tld]
+#relayhost = uucphost
+#relayhost = [an.ip.add.ress]
+#relayhost = [mail.pb.local]
+relayhost = [smtp.googlemail.com]
+
+# REJECTING UNKNOWN RELAY USERS
+#
+# The relay_recipient_maps parameter specifies optional lookup tables
+# with all addresses in the domains that match $relay_domains.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown relay users. This feature is off by default.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify an @domain.tld wild-card, or specify
+# a user@domain.tld address.
+#
+#relay_recipient_maps = hash:/etc/postfix/relay_recipients
+
+# INPUT RATE CONTROL
+#
+# The in_flow_delay configuration parameter implements mail input
+# flow control. This feature is turned on by default, although it
+# still needs further development (it's disabled on SCO UNIX due
+# to an SCO bug).
+#
+# A Postfix process will pause for $in_flow_delay seconds before
+# accepting a new message, when the message arrival rate exceeds the
+# message delivery rate. With the default 100 SMTP server process
+# limit, this limits the mail inflow to 100 messages a second more
+# than the number of messages delivered per second.
+#
+# Specify 0 to disable the feature. Valid delays are 0..10.
+#
+#in_flow_delay = 1s
+
+# ADDRESS REWRITING
+#
+# The ADDRESS_REWRITING_README document gives information about
+# address masquerading or other forms of address rewriting including
+# username->Firstname.Lastname mapping.
+
+# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
+#
+# The VIRTUAL_README document gives information about the many forms
+# of domain hosting that Postfix supports.
+
+# "USER HAS MOVED" BOUNCE MESSAGES
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# TRANSPORT MAP
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# ALIAS DATABASE
+#
+# The alias_maps parameter specifies the list of alias databases used
+# by the local delivery agent. The default list is system dependent.
+#
+# On systems with NIS, the default is to search the local alias
+# database, then the NIS alias database. See aliases(5) for syntax
+# details.
+#
+# If you change the alias database, run "postalias /etc/aliases" (or
+# wherever your system stores the mail alias file), or simply run
+# "newaliases" to build the necessary DBM or DB file.
+#
+# It will take a minute or so before changes become visible. Use
+# "postfix reload" to eliminate the delay.
+#
+#alias_maps = dbm:/etc/aliases
+#alias_maps = hash:/etc/aliases
+#alias_maps = hash:/etc/aliases, nis:mail.aliases
+#alias_maps = netinfo:/aliases
+
+# The alias_database parameter specifies the alias database(s) that
+# are built with "newaliases" or "sendmail -bi". This is a separate
+# configuration parameter, because alias_maps (see above) may specify
+# tables that are not necessarily all under control by Postfix.
+#
+#alias_database = dbm:/etc/aliases
+#alias_database = dbm:/etc/mail/aliases
+#alias_database = hash:/etc/aliases
+#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
+
+# ADDRESS EXTENSIONS (e.g., user+foo)
+#
+# The recipient_delimiter parameter specifies the separator between
+# user names and address extensions (user+foo). See canonical(5),
+# local(8), relocated(5) and virtual(5) for the effects this has on
+# aliases, canonical, virtual, relocated and .forward file lookups.
+# Basically, the software tries user+foo and .forward+foo before
+# trying user and .forward.
+#
+#recipient_delimiter = +
+
+# DELIVERY TO MAILBOX
+#
+# The home_mailbox parameter specifies the optional pathname of a
+# mailbox file relative to a user's home directory. The default
+# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
+# "Maildir/" for qmail-style delivery (the / is required).
+#
+#home_mailbox = Mailbox
+#home_mailbox = Maildir/
+
+# The mail_spool_directory parameter specifies the directory where
+# UNIX-style mailboxes are kept. The default setting depends on the
+# system type.
+#
+#mail_spool_directory = /var/mail
+#mail_spool_directory = /var/spool/mail
+
+# The mailbox_command parameter specifies the optional external
+# command to use instead of mailbox delivery. The command is run as
+# the recipient with proper HOME, SHELL and LOGNAME environment settings.
+# Exception: delivery for root is done as $default_user.
+#
+# Other environment variables of interest: USER (recipient username),
+# EXTENSION (address extension), DOMAIN (domain part of address),
+# and LOCAL (the address localpart).
+#
+# Unlike other Postfix configuration parameters, the mailbox_command
+# parameter is not subjected to $parameter substitutions. This is to
+# make it easier to specify shell syntax (see example below).
+#
+# Avoid shell meta characters because they will force Postfix to run
+# an expensive shell process. Procmail alone is expensive enough.
+#
+# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
+# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
+#
+#mailbox_command = /some/where/procmail
+#mailbox_command = /some/where/procmail -a "$EXTENSION"
+
+# The mailbox_transport specifies the optional transport in master.cf
+# to use after processing aliases and .forward files. This parameter
+# has precedence over the mailbox_command, fallback_transport and
+# luser_relay parameters.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd"
+# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf.
+#mailbox_transport = lmtp:unix:/var/imap/socket/lmtp
+#
+# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and
+# subsequent line in master.cf.
+#mailbox_transport = cyrus
+
+# The fallback_transport specifies the optional transport in master.cf
+# to use for recipients that are not found in the UNIX passwd database.
+# This parameter has precedence over the luser_relay parameter.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#fallback_transport = lmtp:unix:/file/name
+#fallback_transport = cyrus
+#fallback_transport =
+
+# The luser_relay parameter specifies an optional destination address
+# for unknown recipients. By default, mail for unknown@$mydestination,
+# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
+# as undeliverable.
+#
+# The following expansions are done on luser_relay: $user (recipient
+# username), $shell (recipient shell), $home (recipient home directory),
+# $recipient (full recipient address), $extension (recipient address
+# extension), $domain (recipient domain), $local (entire recipient
+# localpart), $recipient_delimiter. Specify ${name?value} or
+# ${name:value} to expand value only when $name does (does not) exist.
+#
+# luser_relay works only for the default Postfix local delivery agent.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must specify "local_recipient_maps =" (i.e. empty) in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#luser_relay = $user@other.host
+#luser_relay = $local@other.host
+#luser_relay = admin+$local
+
+# JUNK MAIL CONTROLS
+#
+# The controls listed here are only a very small subset. The file
+# SMTPD_ACCESS_README provides an overview.
+
+# The header_checks parameter specifies an optional table with patterns
+# that each logical message header is matched against, including
+# headers that span multiple physical lines.
+#
+# By default, these patterns also apply to MIME headers and to the
+# headers of attached messages. With older Postfix versions, MIME and
+# attached message headers were treated as body text.
+#
+# For details, see "man header_checks".
+#
+#header_checks = regexp:/etc/postfix/header_checks
+
+# FAST ETRN SERVICE
+#
+# Postfix maintains per-destination logfiles with information about
+# deferred mail, so that mail can be flushed quickly with the SMTP
+# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
+# See the ETRN_README document for a detailed description.
+#
+# The fast_flush_domains parameter controls what destinations are
+# eligible for this service. By default, they are all domains that
+# this server is willing to relay mail to.
+#
+#fast_flush_domains = $relay_domains
+
+# SHOW SOFTWARE VERSION OR NOT
+#
+# The smtpd_banner parameter specifies the text that follows the 220
+# code in the SMTP server's greeting banner. Some people like to see
+# the mail version advertised. By default, Postfix shows no version.
+#
+# You MUST specify $myhostname at the start of the text. That is an
+# RFC requirement. Postfix itself does not care.
+#
+#smtpd_banner = $myhostname ESMTP $mail_name
+#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
+
+# PARALLEL DELIVERY TO THE SAME DESTINATION
+#
+# How many parallel deliveries to the same user or domain? With local
+# delivery, it does not make sense to do massively parallel delivery
+# to the same user, because mailbox updates must happen sequentially,
+# and expensive pipelines in .forward files can cause disasters when
+# too many are run at the same time. With SMTP deliveries, 10
+# simultaneous connections to the same domain could be sufficient to
+# raise eyebrows.
+#
+# Each message delivery transport has its XXX_destination_concurrency_limit
+# parameter. The default is $default_destination_concurrency_limit for
+# most delivery transports. For the local delivery agent the default is 2.
+
+#local_destination_concurrency_limit = 2
+#default_destination_concurrency_limit = 20
+
+# DEBUGGING CONTROL
+#
+# The debug_peer_level parameter specifies the increment in verbose
+# logging level when an SMTP client or server host name or address
+# matches a pattern in the debug_peer_list parameter.
+#
+debug_peer_level = 2
+
+# The debug_peer_list parameter specifies an optional list of domain
+# or network patterns, /file/name patterns or type:name tables. When
+# an SMTP client or server host name or address matches a pattern,
+# increase the verbose logging level by the amount specified in the
+# debug_peer_level parameter.
+#
+#debug_peer_list = 127.0.0.1
+#debug_peer_list = some.domain
+
+# The debugger_command specifies the external command that is executed
+# when a Postfix daemon program is run with the -D option.
+#
+# Use "command .. & sleep 5" so that the debugger can attach before
+# the process marches on. If you use an X-based debugger, be sure to
+# set up your XAUTHORITY environment variable before starting Postfix.
+#
+debugger_command =
+ PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
+ ddd $daemon_directory/$process_name $process_id & sleep 5
+
+# If you can't use X, use this to capture the call stack when a
+# daemon crashes. The result is in a file in the configuration
+# directory, and is named after the process name and the process ID.
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
+# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
+# >$config_directory/$process_name.$process_id.log & sleep 5
+#
+# Another possibility is to run gdb under a detached screen session.
+# To attach to the screen sesssion, su root and run "screen -r
+# <id_string>" where <id_string> uniquely matches one of the detached
+# sessions (from "screen -list").
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
+# -dmS $process_name gdb $daemon_directory/$process_name
+# $process_id & sleep 1
+
+# INSTALL-TIME CONFIGURATION INFORMATION
+#
+# The following parameters are used when installing a new Postfix version.
+#
+# sendmail_path: The full pathname of the Postfix sendmail command.
+# This is the Sendmail-compatible mail posting interface.
+#
+sendmail_path = /usr/sbin/sendmail
+
+# newaliases_path: The full pathname of the Postfix newaliases command.
+# This is the Sendmail-compatible command to build alias databases.
+#
+newaliases_path = /usr/bin/newaliases
+
+# mailq_path: The full pathname of the Postfix mailq command. This
+# is the Sendmail-compatible mail queue listing command.
+#
+mailq_path = /usr/bin/mailq
+
+# setgid_group: The group for mail submission and queue management
+# commands. This must be a group name with a numerical group ID that
+# is not shared with other accounts, not even with the Postfix account.
+#
+setgid_group = postdrop
+
+# html_directory: The location of the Postfix HTML documentation.
+#
+html_directory = no
+
+# manpage_directory: The location of the Postfix on-line manual pages.
+#
+manpage_directory = /usr/share/man
+
+# sample_directory: The location of the Postfix sample configuration files.
+# This parameter is obsolete as of Postfix 2.1.
+#
+sample_directory = /etc/postfix
+
+# readme_directory: The location of the Postfix README files.
+#
+readme_directory = no
+home_mailbox = .maildir/
+mydomain = pb.local
+canonical_maps = pcre:/etc/postfix/canonical
+myorigin = profitbricks.com
+smtp_sasl_password_maps = hash:/etc/postfix/smtp_auth
+smtp_sasl_auth_enable = yes
+smtp_tls_cert_file = /etc/postfix/postfix.pem
+smtp_sasl_security_options = noanonymous
+smtp_tls_enforce_peername = no
+smtp_tls_key_file = /etc/postfix/postfix.pem
+smtp_use_tls = yes
+tls_random_source = dev:/dev/urandom
--- /dev/null
+# Global Postfix configuration file. This file lists only a subset
+# of all parameters. For the syntax, and for a complete parameter
+# list, see the postconf(5) manual page (command: "man 5 postconf").
+#
+# For common configuration examples, see BASIC_CONFIGURATION_README
+# and STANDARD_CONFIGURATION_README. To find these documents, use
+# the command "postconf html_directory readme_directory", or go to
+# http://www.postfix.org/.
+#
+# For best results, change no more than 2-3 parameters at a time,
+# and test if Postfix still works after every change.
+
+# SOFT BOUNCE
+#
+# The soft_bounce parameter provides a limited safety net for
+# testing. When soft_bounce is enabled, mail will remain queued that
+# would otherwise bounce. This parameter disables locally-generated
+# bounces, and prevents the SMTP server from rejecting mail permanently
+# (by changing 5xx replies into 4xx replies). However, soft_bounce
+# is no cure for address rewriting mistakes or mail routing mistakes.
+#
+#soft_bounce = no
+
+# LOCAL PATHNAME INFORMATION
+#
+# The queue_directory specifies the location of the Postfix queue.
+# This is also the root directory of Postfix daemons that run chrooted.
+# See the files in examples/chroot-setup for setting up Postfix chroot
+# environments on different UNIX systems.
+#
+queue_directory = /var/spool/postfix
+
+# The command_directory parameter specifies the location of all
+# postXXX commands.
+#
+command_directory = /usr/sbin
+
+# The daemon_directory parameter specifies the location of all Postfix
+# daemon programs (i.e. programs listed in the master.cf file). This
+# directory must be owned by root.
+#
+daemon_directory = /usr/libexec/postfix
+
+# The data_directory parameter specifies the location of Postfix-writable
+# data files (caches, random numbers). This directory must be owned
+# by the mail_owner account (see below).
+#
+data_directory = /var/lib/postfix
+
+# QUEUE AND PROCESS OWNERSHIP
+#
+# The mail_owner parameter specifies the owner of the Postfix queue
+# and of most Postfix daemon processes. Specify the name of a user
+# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
+# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
+# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
+# USER.
+#
+mail_owner = postfix
+
+# The default_privs parameter specifies the default rights used by
+# the local delivery agent for delivery to external file or command.
+# These rights are used in the absence of a recipient user context.
+# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
+#
+#default_privs = nobody
+
+# INTERNET HOST AND DOMAIN NAMES
+#
+# The myhostname parameter specifies the internet hostname of this
+# mail system. The default is to use the fully-qualified domain name
+# from gethostname(). $myhostname is used as a default value for many
+# other configuration parameters.
+#
+#myhostname = host.domain.tld
+#myhostname = virtual.domain.tld
+
+# The mydomain parameter specifies the local internet domain name.
+# The default is to use $myhostname minus the first component.
+# $mydomain is used as a default value for many other configuration
+# parameters.
+#
+#mydomain = domain.tld
+
+# SENDING MAIL
+#
+# The myorigin parameter specifies the domain that locally-posted
+# mail appears to come from. The default is to append $myhostname,
+# which is fine for small sites. If you run a domain with multiple
+# machines, you should (1) change this to $mydomain and (2) set up
+# a domain-wide alias database that aliases each user to
+# user@that.users.mailhost.
+#
+# For the sake of consistency between sender and recipient addresses,
+# myorigin also specifies the default domain name that is appended
+# to recipient addresses that have no @domain part.
+#
+#myorigin = $myhostname
+#myorigin = $mydomain
+
+# RECEIVING MAIL
+
+# The inet_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on. By default,
+# the software claims all active interfaces on the machine. The
+# parameter also controls delivery of mail to user@[ip.address].
+#
+# See also the proxy_interfaces parameter, for network addresses that
+# are forwarded to us via a proxy or network address translator.
+#
+# Note: you need to stop/start Postfix when this parameter changes.
+#
+#inet_interfaces = all
+#inet_interfaces = $myhostname
+#inet_interfaces = $myhostname, localhost
+
+# The proxy_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on by way of a
+# proxy or network address translation unit. This setting extends
+# the address list specified with the inet_interfaces parameter.
+#
+# You must specify your proxy/NAT addresses when your system is a
+# backup MX host for other domains, otherwise mail delivery loops
+# will happen when the primary MX host is down.
+#
+#proxy_interfaces =
+#proxy_interfaces = 1.2.3.4
+
+# The mydestination parameter specifies the list of domains that this
+# machine considers itself the final destination for.
+#
+# These domains are routed to the delivery agent specified with the
+# local_transport parameter setting. By default, that is the UNIX
+# compatible delivery agent that lookups all recipients in /etc/passwd
+# and /etc/aliases or their equivalent.
+#
+# The default is $myhostname + localhost.$mydomain. On a mail domain
+# gateway, you should also include $mydomain.
+#
+# Do not specify the names of virtual domains - those domains are
+# specified elsewhere (see VIRTUAL_README).
+#
+# Do not specify the names of domains that this machine is backup MX
+# host for. Specify those names via the relay_domains settings for
+# the SMTP server, or use permit_mx_backup if you are lazy (see
+# STANDARD_CONFIGURATION_README).
+#
+# The local machine is always the final destination for mail addressed
+# to user@[the.net.work.address] of an interface that the mail system
+# receives mail on (see the inet_interfaces parameter).
+#
+# Specify a list of host or domain names, /file/name or type:table
+# patterns, separated by commas and/or whitespace. A /file/name
+# pattern is replaced by its contents; a type:table is matched when
+# a name matches a lookup key (the right-hand side is ignored).
+# Continue long lines by starting the next line with whitespace.
+#
+# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
+#
+#mydestination = $myhostname, localhost.$mydomain, localhost
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
+# mail.$mydomain, www.$mydomain, ftp.$mydomain
+
+# REJECTING MAIL FOR UNKNOWN LOCAL USERS
+#
+# The local_recipient_maps parameter specifies optional lookup tables
+# with all names or addresses of users that are local with respect
+# to $mydestination, $inet_interfaces or $proxy_interfaces.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown local users. This parameter is defined by default.
+#
+# To turn off local recipient checking in the SMTP server, specify
+# local_recipient_maps = (i.e. empty).
+#
+# The default setting assumes that you use the default Postfix local
+# delivery agent for local delivery. You need to update the
+# local_recipient_maps setting if:
+#
+# - You define $mydestination domain recipients in files other than
+# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
+# For example, you define $mydestination domain recipients in
+# the $virtual_mailbox_maps files.
+#
+# - You redefine the local delivery agent in master.cf.
+#
+# - You redefine the "local_transport" setting in main.cf.
+#
+# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
+# feature of the Postfix local delivery agent (see local(8)).
+#
+# Details are described in the LOCAL_RECIPIENT_README file.
+#
+# Beware: if the Postfix SMTP server runs chrooted, you probably have
+# to access the passwd file via the proxymap service, in order to
+# overcome chroot restrictions. The alternative, having a copy of
+# the system passwd file in the chroot jail is just not practical.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify a bare username, an @domain.tld
+# wild-card, or specify a user@domain.tld address.
+#
+#local_recipient_maps = unix:passwd.byname $alias_maps
+#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
+#local_recipient_maps =
+
+# The unknown_local_recipient_reject_code specifies the SMTP server
+# response code when a recipient domain matches $mydestination or
+# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
+# and the recipient address or address local-part is not found.
+#
+# The default setting is 550 (reject mail) but it is safer to start
+# with 450 (try again later) until you are certain that your
+# local_recipient_maps settings are OK.
+#
+unknown_local_recipient_reject_code = 550
+
+# TRUST AND RELAY CONTROL
+
+# The mynetworks parameter specifies the list of "trusted" SMTP
+# clients that have more privileges than "strangers".
+#
+# In particular, "trusted" SMTP clients are allowed to relay mail
+# through Postfix. See the smtpd_recipient_restrictions parameter
+# in postconf(5).
+#
+# You can specify the list of "trusted" network addresses by hand
+# or you can let Postfix do it for you (which is the default).
+#
+# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
+# clients in the same IP subnetworks as the local machine.
+# On Linux, this does works correctly only with interfaces specified
+# with the "ifconfig" command.
+#
+# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
+# clients in the same IP class A/B/C networks as the local machine.
+# Don't do this with a dialup site - it would cause Postfix to "trust"
+# your entire provider's network. Instead, specify an explicit
+# mynetworks list by hand, as described below.
+#
+# Specify "mynetworks_style = host" when Postfix should "trust"
+# only the local machine.
+#
+#mynetworks_style = class
+#mynetworks_style = subnet
+#mynetworks_style = host
+
+# Alternatively, you can specify the mynetworks list by hand, in
+# which case Postfix ignores the mynetworks_style setting.
+#
+# Specify an explicit list of network/netmask patterns, where the
+# mask specifies the number of bits in the network part of a host
+# address.
+#
+# You can also specify the absolute pathname of a pattern file instead
+# of listing the patterns here. Specify type:table for table-based lookups
+# (the value on the table right-hand side is not used).
+#
+#mynetworks = 168.100.189.0/28, 127.0.0.0/8
+#mynetworks = $config_directory/mynetworks
+#mynetworks = hash:/etc/postfix/network_table
+
+# The relay_domains parameter restricts what destinations this system will
+# relay mail to. See the smtpd_recipient_restrictions description in
+# postconf(5) for detailed information.
+#
+# By default, Postfix relays mail
+# - from "trusted" clients (IP address matches $mynetworks) to any destination,
+# - from "untrusted" clients to destinations that match $relay_domains or
+# subdomains thereof, except addresses with sender-specified routing.
+# The default relay_domains value is $mydestination.
+#
+# In addition to the above, the Postfix SMTP server by default accepts mail
+# that Postfix is final destination for:
+# - destinations that match $inet_interfaces or $proxy_interfaces,
+# - destinations that match $mydestination
+# - destinations that match $virtual_alias_domains,
+# - destinations that match $virtual_mailbox_domains.
+# These destinations do not need to be listed in $relay_domains.
+#
+# Specify a list of hosts or domains, /file/name patterns or type:name
+# lookup tables, separated by commas and/or whitespace. Continue
+# long lines by starting the next line with whitespace. A file name
+# is replaced by its contents; a type:name table is matched when a
+# (parent) domain appears as lookup key.
+#
+# NOTE: Postfix will not automatically forward mail for domains that
+# list this system as their primary or backup MX host. See the
+# permit_mx_backup restriction description in postconf(5).
+#
+#relay_domains = $mydestination
+
+# INTERNET OR INTRANET
+
+# The relayhost parameter specifies the default host to send mail to
+# when no entry is matched in the optional transport(5) table. When
+# no relayhost is given, mail is routed directly to the destination.
+#
+# On an intranet, specify the organizational domain name. If your
+# internal DNS uses no MX records, specify the name of the intranet
+# gateway host instead.
+#
+# In the case of SMTP, specify a domain, host, host:port, [host]:port,
+# [address] or [address]:port; the form [host] turns off MX lookups.
+#
+# If you're connected via UUCP, see also the default_transport parameter.
+#
+#relayhost = $mydomain
+#relayhost = [gateway.my.domain]
+#relayhost = [mailserver.isp.tld]
+#relayhost = uucphost
+#relayhost = [an.ip.add.ress]
+
+# REJECTING UNKNOWN RELAY USERS
+#
+# The relay_recipient_maps parameter specifies optional lookup tables
+# with all addresses in the domains that match $relay_domains.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown relay users. This feature is off by default.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify an @domain.tld wild-card, or specify
+# a user@domain.tld address.
+#
+#relay_recipient_maps = hash:/etc/postfix/relay_recipients
+
+# INPUT RATE CONTROL
+#
+# The in_flow_delay configuration parameter implements mail input
+# flow control. This feature is turned on by default, although it
+# still needs further development (it's disabled on SCO UNIX due
+# to an SCO bug).
+#
+# A Postfix process will pause for $in_flow_delay seconds before
+# accepting a new message, when the message arrival rate exceeds the
+# message delivery rate. With the default 100 SMTP server process
+# limit, this limits the mail inflow to 100 messages a second more
+# than the number of messages delivered per second.
+#
+# Specify 0 to disable the feature. Valid delays are 0..10.
+#
+#in_flow_delay = 1s
+
+# ADDRESS REWRITING
+#
+# The ADDRESS_REWRITING_README document gives information about
+# address masquerading or other forms of address rewriting including
+# username->Firstname.Lastname mapping.
+
+# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
+#
+# The VIRTUAL_README document gives information about the many forms
+# of domain hosting that Postfix supports.
+
+# "USER HAS MOVED" BOUNCE MESSAGES
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# TRANSPORT MAP
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# ALIAS DATABASE
+#
+# The alias_maps parameter specifies the list of alias databases used
+# by the local delivery agent. The default list is system dependent.
+#
+# On systems with NIS, the default is to search the local alias
+# database, then the NIS alias database. See aliases(5) for syntax
+# details.
+#
+# If you change the alias database, run "postalias /etc/aliases" (or
+# wherever your system stores the mail alias file), or simply run
+# "newaliases" to build the necessary DBM or DB file.
+#
+# It will take a minute or so before changes become visible. Use
+# "postfix reload" to eliminate the delay.
+#
+#alias_maps = dbm:/etc/aliases
+#alias_maps = hash:/etc/aliases
+#alias_maps = hash:/etc/aliases, nis:mail.aliases
+#alias_maps = netinfo:/aliases
+
+# The alias_database parameter specifies the alias database(s) that
+# are built with "newaliases" or "sendmail -bi". This is a separate
+# configuration parameter, because alias_maps (see above) may specify
+# tables that are not necessarily all under control by Postfix.
+#
+#alias_database = dbm:/etc/aliases
+#alias_database = dbm:/etc/mail/aliases
+#alias_database = hash:/etc/aliases
+#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
+
+# ADDRESS EXTENSIONS (e.g., user+foo)
+#
+# The recipient_delimiter parameter specifies the separator between
+# user names and address extensions (user+foo). See canonical(5),
+# local(8), relocated(5) and virtual(5) for the effects this has on
+# aliases, canonical, virtual, relocated and .forward file lookups.
+# Basically, the software tries user+foo and .forward+foo before
+# trying user and .forward.
+#
+#recipient_delimiter = +
+
+# DELIVERY TO MAILBOX
+#
+# The home_mailbox parameter specifies the optional pathname of a
+# mailbox file relative to a user's home directory. The default
+# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
+# "Maildir/" for qmail-style delivery (the / is required).
+#
+#home_mailbox = Mailbox
+#home_mailbox = Maildir/
+
+# The mail_spool_directory parameter specifies the directory where
+# UNIX-style mailboxes are kept. The default setting depends on the
+# system type.
+#
+#mail_spool_directory = /var/mail
+#mail_spool_directory = /var/spool/mail
+
+# The mailbox_command parameter specifies the optional external
+# command to use instead of mailbox delivery. The command is run as
+# the recipient with proper HOME, SHELL and LOGNAME environment settings.
+# Exception: delivery for root is done as $default_user.
+#
+# Other environment variables of interest: USER (recipient username),
+# EXTENSION (address extension), DOMAIN (domain part of address),
+# and LOCAL (the address localpart).
+#
+# Unlike other Postfix configuration parameters, the mailbox_command
+# parameter is not subjected to $parameter substitutions. This is to
+# make it easier to specify shell syntax (see example below).
+#
+# Avoid shell meta characters because they will force Postfix to run
+# an expensive shell process. Procmail alone is expensive enough.
+#
+# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
+# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
+#
+#mailbox_command = /some/where/procmail
+#mailbox_command = /some/where/procmail -a "$EXTENSION"
+
+# The mailbox_transport specifies the optional transport in master.cf
+# to use after processing aliases and .forward files. This parameter
+# has precedence over the mailbox_command, fallback_transport and
+# luser_relay parameters.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd"
+# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf.
+#mailbox_transport = lmtp:unix:/var/imap/socket/lmtp
+#
+# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and
+# subsequent line in master.cf.
+#mailbox_transport = cyrus
+
+# The fallback_transport specifies the optional transport in master.cf
+# to use for recipients that are not found in the UNIX passwd database.
+# This parameter has precedence over the luser_relay parameter.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#fallback_transport = lmtp:unix:/file/name
+#fallback_transport = cyrus
+#fallback_transport =
+
+# The luser_relay parameter specifies an optional destination address
+# for unknown recipients. By default, mail for unknown@$mydestination,
+# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
+# as undeliverable.
+#
+# The following expansions are done on luser_relay: $user (recipient
+# username), $shell (recipient shell), $home (recipient home directory),
+# $recipient (full recipient address), $extension (recipient address
+# extension), $domain (recipient domain), $local (entire recipient
+# localpart), $recipient_delimiter. Specify ${name?value} or
+# ${name:value} to expand value only when $name does (does not) exist.
+#
+# luser_relay works only for the default Postfix local delivery agent.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must specify "local_recipient_maps =" (i.e. empty) in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#luser_relay = $user@other.host
+#luser_relay = $local@other.host
+#luser_relay = admin+$local
+
+# JUNK MAIL CONTROLS
+#
+# The controls listed here are only a very small subset. The file
+# SMTPD_ACCESS_README provides an overview.
+
+# The header_checks parameter specifies an optional table with patterns
+# that each logical message header is matched against, including
+# headers that span multiple physical lines.
+#
+# By default, these patterns also apply to MIME headers and to the
+# headers of attached messages. With older Postfix versions, MIME and
+# attached message headers were treated as body text.
+#
+# For details, see "man header_checks".
+#
+#header_checks = regexp:/etc/postfix/header_checks
+
+# FAST ETRN SERVICE
+#
+# Postfix maintains per-destination logfiles with information about
+# deferred mail, so that mail can be flushed quickly with the SMTP
+# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
+# See the ETRN_README document for a detailed description.
+#
+# The fast_flush_domains parameter controls what destinations are
+# eligible for this service. By default, they are all domains that
+# this server is willing to relay mail to.
+#
+#fast_flush_domains = $relay_domains
+
+# SHOW SOFTWARE VERSION OR NOT
+#
+# The smtpd_banner parameter specifies the text that follows the 220
+# code in the SMTP server's greeting banner. Some people like to see
+# the mail version advertised. By default, Postfix shows no version.
+#
+# You MUST specify $myhostname at the start of the text. That is an
+# RFC requirement. Postfix itself does not care.
+#
+#smtpd_banner = $myhostname ESMTP $mail_name
+#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
+
+# PARALLEL DELIVERY TO THE SAME DESTINATION
+#
+# How many parallel deliveries to the same user or domain? With local
+# delivery, it does not make sense to do massively parallel delivery
+# to the same user, because mailbox updates must happen sequentially,
+# and expensive pipelines in .forward files can cause disasters when
+# too many are run at the same time. With SMTP deliveries, 10
+# simultaneous connections to the same domain could be sufficient to
+# raise eyebrows.
+#
+# Each message delivery transport has its XXX_destination_concurrency_limit
+# parameter. The default is $default_destination_concurrency_limit for
+# most delivery transports. For the local delivery agent the default is 2.
+
+#local_destination_concurrency_limit = 2
+#default_destination_concurrency_limit = 20
+
+# DEBUGGING CONTROL
+#
+# The debug_peer_level parameter specifies the increment in verbose
+# logging level when an SMTP client or server host name or address
+# matches a pattern in the debug_peer_list parameter.
+#
+debug_peer_level = 2
+
+# The debug_peer_list parameter specifies an optional list of domain
+# or network patterns, /file/name patterns or type:name tables. When
+# an SMTP client or server host name or address matches a pattern,
+# increase the verbose logging level by the amount specified in the
+# debug_peer_level parameter.
+#
+#debug_peer_list = 127.0.0.1
+#debug_peer_list = some.domain
+
+# The debugger_command specifies the external command that is executed
+# when a Postfix daemon program is run with the -D option.
+#
+# Use "command .. & sleep 5" so that the debugger can attach before
+# the process marches on. If you use an X-based debugger, be sure to
+# set up your XAUTHORITY environment variable before starting Postfix.
+#
+debugger_command =
+ PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
+ ddd $daemon_directory/$process_name $process_id & sleep 5
+
+# If you can't use X, use this to capture the call stack when a
+# daemon crashes. The result is in a file in the configuration
+# directory, and is named after the process name and the process ID.
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
+# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
+# >$config_directory/$process_name.$process_id.log & sleep 5
+#
+# Another possibility is to run gdb under a detached screen session.
+# To attach to the screen sesssion, su root and run "screen -r
+# <id_string>" where <id_string> uniquely matches one of the detached
+# sessions (from "screen -list").
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
+# -dmS $process_name gdb $daemon_directory/$process_name
+# $process_id & sleep 1
+
+# INSTALL-TIME CONFIGURATION INFORMATION
+#
+# The following parameters are used when installing a new Postfix version.
+#
+# sendmail_path: The full pathname of the Postfix sendmail command.
+# This is the Sendmail-compatible mail posting interface.
+#
+sendmail_path = /usr/sbin/sendmail
+
+# newaliases_path: The full pathname of the Postfix newaliases command.
+# This is the Sendmail-compatible command to build alias databases.
+#
+newaliases_path = /usr/bin/newaliases
+
+# mailq_path: The full pathname of the Postfix mailq command. This
+# is the Sendmail-compatible mail queue listing command.
+#
+mailq_path = /usr/bin/mailq
+
+# setgid_group: The group for mail submission and queue management
+# commands. This must be a group name with a numerical group ID that
+# is not shared with other accounts, not even with the Postfix account.
+#
+setgid_group = postdrop
+
+# html_directory: The location of the Postfix HTML documentation.
+#
+html_directory = no
+
+# manpage_directory: The location of the Postfix on-line manual pages.
+#
+manpage_directory = /usr/share/man
+
+# sample_directory: The location of the Postfix sample configuration files.
+# This parameter is obsolete as of Postfix 2.1.
+#
+sample_directory = /etc/postfix
+
+# readme_directory: The location of the Postfix README files.
+#
+readme_directory = no
+inet_protocols = ipv4
+home_mailbox = .maildir/
+smtpd_relay_restrictions = permit_mynetworks,permit_sasl_authenticated,defer_unauth_destination
--- /dev/null
+# /etc/skel/.bash_logout
+
+# This file is sourced when a login shell terminates.
+
+# Clear the screen for security's sake.
+#clear
--- /dev/null
+# /etc/skel/.bash_logout
+
+# This file is sourced when a login shell terminates.
+
+# Clear the screen for security's sake.
+clear
--- /dev/null
+## sudoers file.
+##
+## This file MUST be edited with the 'visudo' command as root.
+## Failure to use 'visudo' may result in syntax or file permission errors
+## that prevent sudo from running.
+##
+## See the sudoers man page for the details on how to write a sudoers file.
+##
+
+##
+## Host alias specification
+##
+## Groups of machines. These may include host names (optionally with wildcards),
+## IP addresses, network numbers or netgroups.
+# Host_Alias WEBSERVERS = www1, www2, www3
+
+##
+## User alias specification
+##
+## Groups of users. These may consist of user names, uids, Unix groups,
+## or netgroups.
+# User_Alias ADMINS = millert, dowdy, mikef
+
+##
+## Cmnd alias specification
+##
+## Groups of commands. Often used to group related commands together.
+# Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \
+# /usr/bin/pkill, /usr/bin/top
+
+##
+## Defaults specification
+##
+## You may wish to keep some of the following environment variables
+## when running commands via sudo.
+##
+## Locale settings
+# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET"
+##
+## Run X applications through sudo; HOME is used to find the
+## .Xauthority file. Note that other programs use HOME to find
+## configuration files and this may lead to privilege escalation!
+# Defaults env_keep += "HOME"
+##
+## X11 resource path settings
+# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH"
+##
+## Desktop path settings
+# Defaults env_keep += "QTDIR KDEDIR"
+##
+## Allow sudo-run commands to inherit the callers' ConsoleKit session
+# Defaults env_keep += "XDG_SESSION_COOKIE"
+##
+## Uncomment to enable special input methods. Care should be taken as
+## this may allow users to subvert the command being run via sudo.
+# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER"
+##
+## Uncomment to enable logging of a command's output, except for
+## sudoreplay and reboot. Use sudoreplay to play back logged sessions.
+# Defaults log_output
+# Defaults!/usr/bin/sudoreplay !log_output
+# Defaults!/usr/local/bin/sudoreplay !log_output
+# Defaults!/sbin/reboot !log_output
+
+##
+## Runas alias specification
+##
+
+##
+## User privilege specification
+##
+root ALL=(ALL) ALL
+
+## Uncomment to allow members of group wheel to execute any command
+# %wheel ALL=(ALL) ALL
+
+## Same thing without a password
+# %wheel ALL=(ALL) NOPASSWD: ALL
+
+## Uncomment to allow members of group sudo to execute any command
+# %sudo ALL=(ALL) ALL
+
+## Uncomment to allow any user to run sudo if they know the password
+## of the user they are running the command as (root by default).
+# Defaults targetpw # Ask for the password of the target user
+# ALL ALL=(ALL) ALL # WARNING: only use this together with 'Defaults targetpw'
+
+## Read drop-in files from /etc/sudoers.d
+## (the '#' here does not indicate a comment)
+#includedir /etc/sudoers.d
+
+fbrehm ALL=(ALL) NOPASSWD: ALL
+sysadmin ALL=(ALL) NOPASSWD: ALL
--- /dev/null
+## sudoers file.
+##
+## This file MUST be edited with the 'visudo' command as root.
+## Failure to use 'visudo' may result in syntax or file permission errors
+## that prevent sudo from running.
+##
+## See the sudoers man page for the details on how to write a sudoers file.
+##
+
+##
+## Host alias specification
+##
+## Groups of machines. These may include host names (optionally with wildcards),
+## IP addresses, network numbers or netgroups.
+# Host_Alias WEBSERVERS = www1, www2, www3
+
+##
+## User alias specification
+##
+## Groups of users. These may consist of user names, uids, Unix groups,
+## or netgroups.
+# User_Alias ADMINS = millert, dowdy, mikef
+
+##
+## Cmnd alias specification
+##
+## Groups of commands. Often used to group related commands together.
+# Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \
+# /usr/bin/pkill, /usr/bin/top
+
+##
+## Defaults specification
+##
+## You may wish to keep some of the following environment variables
+## when running commands via sudo.
+##
+## Locale settings
+# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET"
+##
+## Run X applications through sudo; HOME is used to find the
+## .Xauthority file. Note that other programs use HOME to find
+## configuration files and this may lead to privilege escalation!
+# Defaults env_keep += "HOME"
+##
+## X11 resource path settings
+# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH"
+##
+## Desktop path settings
+# Defaults env_keep += "QTDIR KDEDIR"
+##
+## Allow sudo-run commands to inherit the callers' ConsoleKit session
+# Defaults env_keep += "XDG_SESSION_COOKIE"
+##
+## Uncomment to enable special input methods. Care should be taken as
+## this may allow users to subvert the command being run via sudo.
+# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER"
+##
+## Uncomment to enable logging of a command's output, except for
+## sudoreplay and reboot. Use sudoreplay to play back logged sessions.
+# Defaults log_output
+# Defaults!/usr/bin/sudoreplay !log_output
+# Defaults!/usr/local/bin/sudoreplay !log_output
+# Defaults!/sbin/reboot !log_output
+
+##
+## Runas alias specification
+##
+
+##
+## User privilege specification
+##
+root ALL=(ALL) ALL
+
+## Uncomment to allow members of group wheel to execute any command
+# %wheel ALL=(ALL) ALL
+
+## Same thing without a password
+# %wheel ALL=(ALL) NOPASSWD: ALL
+
+## Uncomment to allow members of group sudo to execute any command
+# %sudo ALL=(ALL) ALL
+
+## Uncomment to allow any user to run sudo if they know the password
+## of the user they are running the command as (root by default).
+# Defaults targetpw # Ask for the password of the target user
+# ALL ALL=(ALL) ALL # WARNING: only use this together with 'Defaults targetpw'
+
+## Read drop-in files from /etc/sudoers.d
+## (the '#' here does not indicate a comment)
+#includedir /etc/sudoers.d
+++ /dev/null
-PYTHONPATH="/usr/lib/portage/pym"
+++ /dev/null
-CONFIG_PROTECT="/usr/share/openvpn/easy-rsa"
-Gentoo Base System release 2.1
+Gentoo Base System release 2.2
# GTK+ Input Method Modules file
# Automatically generated file, do not edit
-# Created by gtk-query-immodules-2.0 from gtk+-2.24.16
+# Created by gtk-query-immodules-2.0 from gtk+-2.24.17
#
# ModulesPath = /root/.gtk-2.0/2.10.0/x86_64-pc-linux-gnu/immodules:/root/.gtk-2.0/2.10.0/immodules:/root/.gtk-2.0/x86_64-pc-linux-gnu/immodules:/root/.gtk-2.0/immodules:/usr/lib64/gtk-2.0/2.10.0/x86_64-pc-linux-gnu/immodules:/usr/lib64/gtk-2.0/2.10.0/immodules:/usr/lib64/gtk-2.0/x86_64-pc-linux-gnu/immodules:/usr/lib64/gtk-2.0/immodules
#
--- /dev/null
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License, v2 or later
+# $Header: /var/cvsroot/gentoo-x86/net-misc/dropbox/files/dropbox.initd,v 1.2 2012/07/25 02:39:58 naota Exp $
+
+PID_DIR=/var/run/dropbox
+
+depend() {
+ need localmount net
+ after bootmisc
+}
+
+start() {
+ local tmpnice="${NICE:+"--nicelevel "}${NICE}"
+ local tmpionice="${IONICE:+"--ionice "}${IONICE}"
+ local started=""
+
+ mkdir -p ${PID_DIR}
+
+ ebegin "Starting dropbox"
+ for dbuser in ${DROPBOX_USERS}; do
+ local homedir=$(eval echo ~${dbuser})
+ if test -d "${homedir}" && \
+ start-stop-daemon -S -b \
+ -m --pidfile ${PID_DIR}/$dbuser.pid \
+ ${tmpnice} ${tmpionice} \
+ -u ${dbuser} -v \
+ -e HOME=${homedir} \
+ -x /opt/bin/dropbox; then
+ started="${started} ${dbuser}"
+ else
+ eend $?
+ eerror "Failed to start dropbox for ${dbuser}"
+ if [ -n "${started}" ]; then
+ eerror "Stopping already started dropbox"
+ DROPBOX_USERS=${started} stop
+ fi
+ return 1
+ fi
+ done
+ if [ -z "${started}" ];then
+ eerror "No dropbox started"
+ eend 1
+ else
+ eend 0
+ fi
+}
+
+stop() {
+ local retval=0
+ ebegin "Stopping dropbox"
+ for dbuser in ${DROPBOX_USERS}; do
+ start-stop-daemon --stop \
+ --pidfile ${PID_DIR}/${dbuser}.pid || retval=$?
+ done
+ eend ${retval}
+}
+
+status() {
+ for dbuser in ${DROPBOX_USERS}; do
+ if [ -e ${PID_DIR}/${dbuser}.pid ] ; then
+ echo "dropboxd for USER $dbuser: running."
+ else
+ echo "dropboxd for USER $dbuser: not running."
+ fi
+ done
+}
#!/sbin/runscript
-# Copyright 1999-2011 Gentoo Foundation
+# Copyright 1999-2013 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql-init-scripts/files/mysql-5.1.53-init.d,v 1.1 2011/01/13 20:06:06 robbat2 Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql-init-scripts/files/mysql-5.1.67-init.d,v 1.1 2013/01/18 01:51:47 robbat2 Exp $
depend() {
use net.lo
start() {
# Check for old conf.d variables that mean migration was not yet done.
- local varlist="${!mysql_slot_*} ${!MYSQL_BLOG_PID_FILE*} ${!STOPTIMEOUT*}"
- varlist="${varlist// /}"
+ set | egrep -sq '^(mysql_slot_|MYSQL_BLOG_PID_FILE|STOPTIMEOUT)'
+ rc=$?
# Yes, MYSQL_INIT_I_KNOW_WHAT_I_AM_DOING is a hidden variable.
# It does have a use in testing, as it is possible to build a config file
# that works with both the old and new init scripts simulateously.
- if [ -n "${varlist}" -a -z "${MYSQL_INIT_I_KNOW_WHAT_I_AM_DOING}" ]; then
+ if [ "${rc}" = 0 -a -z "${MYSQL_INIT_I_KNOW_WHAT_I_AM_DOING}" ]; then
eerror "You have not updated your conf.d for the new mysql-init-scripts-2 revamp."
eerror "Not proceeding because it may be dangerous."
return 1
fi
local piddir="${pidfile%/*}"
- if [ ! -d "$piddir" ] ; then
- mkdir "$piddir" && \
- chown mysql "$piddir"
- rc=$?
- if [ $rc -ne 0 ]; then
- eerror "Directory $piddir for pidfile does not exist and cannot be created"
- return 1
- fi
+ checkpath -d --owner mysql:mysql --mode 0755 "$piddir"
+ rc=$?
+ if [ $rc -ne 0 ]; then
+ eerror "Directory $piddir for pidfile does not exist and cannot be created"
+ return 1
fi
local startup_timeout=${STARTUP_TIMEOUT:-900}
local tmpnice="${NICE:+"--nicelevel "}${NICE}"
local tmpionice="${IONICE:+"--ionice "}${IONICE}"
start-stop-daemon \
- ${DEBUG/*/"--verbose"} \
+ ${DEBUG:+"--verbose"} \
--start \
--exec "${basedir}"/sbin/mysqld \
--pidfile "${pidfile}" \
local stop_timeout=${STOP_TIMEOUT:-120}
start-stop-daemon \
- ${DEBUG/*/"--verbose"} \
+ ${DEBUG:+"--verbose"} \
--stop \
--exec "${basedir}"/sbin/mysqld \
--pidfile "${pidfile}" \
2 nbyte
3 u32
4 meta
+7 canid
+8 ipset
compress
delaycompress
copytruncate
- size 100k
+ minsize 100k
}
compress
delaycompress
copytruncate
- size 100k
+ minsize 100k
}
compress
delaycompress
copytruncate
- size 100k
+ minsize 100k
}
compress
delaycompress
copytruncate
- size 100k
+ minsize 100k
}
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
-# Crypto modules (see http://www.kerneli.org/)
+# Crypto modules
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
--- /dev/null
+NAME=Gentoo
+ID=gentoo
+PRETTY_NAME="Gentoo/Linux"
+ANSI_COLOR="1;32"
+HOME_URL="http://www.gentoo.org/"
+SUPPORT_URL="http://www.gentoo.org/main/en/support.xml"
+BUG_REPORT_URL="https://bugs.gentoo.org/"
# -o syslog_name=postfix/submission
# -o smtpd_tls_security_level=encrypt
# -o smtpd_sasl_auth_enable=yes
-# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+# -o smtpd_reject_unlisted_recipient=no
+# -o smtpd_client_restrictions=$mua_client_restrictions
+# -o smtpd_helo_restrictions=$mua_helo_restrictions
+# -o smtpd_sender_restrictions=$mua_sender_restrictions
+# -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject
# -o milter_macro_daemon_name=ORIGINATING
#smtps inet n - n - - smtpd
# -o syslog_name=postfix/smtps
# -o smtpd_tls_wrappermode=yes
# -o smtpd_sasl_auth_enable=yes
-# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+# -o smtpd_reject_unlisted_recipient=no
+# -o smtpd_client_restrictions=$mua_client_restrictions
+# -o smtpd_helo_restrictions=$mua_helo_restrictions
+# -o smtpd_sender_restrictions=$mua_sender_restrictions
+# -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject
# -o milter_macro_daemon_name=ORIGINATING
#628 inet n - n - - qmqpd
-pickup fifo n - n 60 1 pickup
+pickup unix n - n 60 1 pickup
cleanup unix n - n - 0 cleanup
-qmgr fifo n - n 300 1 qmgr
-#qmgr fifo n - n 300 1 oqmgr
+qmgr unix n - n 300 1 qmgr
+#qmgr unix n - n 300 1 oqmgr
tlsmgr unix - - n 1000? 1 tlsmgr
rewrite unix - - n - - trivial-rewrite
bounce unix - - n - 0 bounce
-SEARCH_DIRS_MASK="/opt/oracle-jdk-bin-1.7.0.17"
+SEARCH_DIRS_MASK="/opt/oracle-jdk-bin-1.7.0.21"
-SEARCH_DIRS_MASK="/opt/oracle-jre-bin-1.7.0.17"
+SEARCH_DIRS_MASK="/opt/oracle-jre-bin-1.7.0.21"
CATALOG "/etc/sgml/xml-docbook-4.1.2.cat"
CATALOG "/etc/sgml/xml-docbook-4.3.cat"
CATALOG "/etc/sgml/xml-docbook-4.4.cat"
-CATALOG "/etc/sgml/openjade-1.3.2.cat"
CATALOG "/etc/sgml/xml-docbook-4.5.cat"
CATALOG "/etc/sgml/xhtml1.cat"
+CATALOG "/etc/sgml/openjade-1.3.2.cat"
-german-x-2009-06-19 dehypht-x-2009-06-19.tex
+german-x-2012-05-30 dehypht-x-2012-05-30.tex
=german-x-latest
-ngerman-x-2009-06-19 dehyphn-x-2009-06-19.tex
+ngerman-x-2012-05-30 dehyphn-x-2012-05-30.tex
=ngerman-x-latest
german loadhyph-de-1901.tex
ngerman loadhyph-de-1996.tex
- ['german-x-2009-06-19'] = {
- loader = 'dehypht-x-2009-06-19.tex',
+ ['german-x-2012-05-30'] = {
+ loader = 'dehypht-x-2012-05-30.tex',
lefthyphenmin = 2,
righthyphenmin = 2,
synonyms = { 'german-x-latest' },
patterns = 'hyph-de-1901.pat.txt',
hyphenation = 'hyph-de-1901.hyp.txt',
},
- ['ngerman-x-2009-06-19'] = {
- loader = 'dehyphn-x-2009-06-19.tex',
+ ['ngerman-x-2012-05-30'] = {
+ loader = 'dehyphn-x-2012-05-30.tex',
lefthyphenmin = 2,
righthyphenmin = 2,
synonyms = { 'ngerman-x-latest' },
-\addlanguage{german-x-2009-06-19}{dehypht-x-2009-06-19.tex}{}{2}{2}
-\addlanguage{german-x-latest}{dehypht-x-2009-06-19.tex}{}{2}{2}
-\addlanguage{ngerman-x-2009-06-19}{dehyphn-x-2009-06-19.tex}{}{2}{2}
-\addlanguage{ngerman-x-latest}{dehyphn-x-2009-06-19.tex}{}{2}{2}
+\addlanguage{german-x-2012-05-30}{dehypht-x-2012-05-30.tex}{}{2}{2}
+\addlanguage{german-x-latest}{dehypht-x-2012-05-30.tex}{}{2}{2}
+\addlanguage{ngerman-x-2012-05-30}{dehyphn-x-2012-05-30.tex}{}{2}{2}
+\addlanguage{ngerman-x-latest}{dehyphn-x-2012-05-30.tex}{}{2}{2}
\addlanguage{german}{loadhyph-de-1901.tex}{}{2}{2}
\addlanguage{ngerman}{loadhyph-de-1996.tex}{}{2}{2}
\addlanguage{swissgerman}{loadhyph-de-ch-1901.tex}{}{2}{2}
80jadetex.cnf
./updmap.d:
-.keep_app-text_texlive-core-0
00updmap.cfg
+.keep_app-text_texlive-core-0
texlive-basic.cfg
texlive-context.cfg
texlive-fontsextra.cfg
texlive-science.cfg
./web2c:
-.keep_app-text_texlive-core-0
fmtutil.cnf
+.keep_app-text_texlive-core-0
texmf.cnf
updmap.cfg
% If you modify this original file, YOUR CHANGES WILL BE LOST when it is
% updated. Instead, put your changes -- and only your changes, not an
% entire copy of the full texmf.cnf! -- in ../../texmf.cnf. That is, if
-% this file is installed in /some/path/to/texlive/2011/texmf/web2c/texmf.cnf,
-% add your custom settings to /some/path/to/texlive/2011/texmf.cnf.
+% this file is installed in /some/path/to/texlive/2012/texmf/web2c/texmf.cnf,
+% add your custom settings to /some/path/to/texlive/2012/texmf.cnf.
%
% What follows is a super-summary of what this .cnf file can
% contain. Please read the Kpathsea manual for more information.
% use of this.
+
% (http://tug.org/tds), or files may not be found.
%
% Redistributors will probably want $SELFAUTODIR/share, i.e., /usr/share.
+% Kpathsea sets SELFAUTOLOC (the directory with the binary),
+% SELFAUTODIR (its parent), and SELFAUTOPARENT (its grandparent).
TEXMFROOT = $SELFAUTODIR/share
% The tree containing runtime files related to the specific
TEXINPUTS.omega = .;$TEXMF/tex/{plain,generic,}//
% p(La)TeX.
-TEXINPUTS.ptex = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}//
-TEXINPUTS.platex = .;$TEXMF/tex/{platex,ptexgeneric,latex,generic,}//
+TEXINPUTS.ptex = .;$TEXMF/tex/{ptex,plain,generic,}//
+TEXINPUTS.platex = .;$TEXMF/tex/{platex,latex,generic,}//
-% epTeX.
-TEXINPUTS.eptex = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}//
+% epTeX, and for pmpost.
+TEXINPUTS.eptex = .;$TEXMF/tex/{ptex,plain,generic,}//
+TEX.pmpost = eptex
+
+% (e)up(La)TeX.
+TEXINPUTS.uplatex = .;$TEXMF/tex/{uplatex,platex,latex,generic,}//
+TEXINPUTS.uptex = .;$TEXMF/tex/{uptex,ptex,plain,generic,}//
+TEXINPUTS.euptex = .;$TEXMF/tex/{uptex,ptex,plain,generic}//
% pBibTeX bibliographies and style files.
BIBINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bib//
MLBIBINPUTS = .;$TEXMF/bibtex/bib/{mlbib,}//
MLBSTINPUTS = .;$TEXMF/bibtex/{mlbst,bst}//
+% .ris and .bltxml bibliography formats.
+RISINPUTS = .;$TEXMF/bibtex/ris//
+BLTXMLINPUTS = .;$TEXMF/bibtex/bltxml//
+
% MFT style files.
MFTINPUTS = .;$TEXMF/mft//
MIMELIBDIR = $SELFAUTOPARENT/etc
MAILCAPLIBDIR = $SELFAUTOPARENT/etc
-% Default settings for fontconfig library, used by Windows versions of
-% xetex/xdvipdfmx. On Unixish systems, fontconfig ignores this.
-FONTCONFIG_FILE=fonts.conf
-FONTCONFIG_PATH=$TEXMFSYSVAR/fonts/conf
-FC_CACHEDIR=$TEXMFSYSVAR/fonts/cache
+% Default settings for the fontconfig library as used by the Windows
+% versions of xetex/xdvipdfmx. On Unixish systems, fontconfig ignores
+% this. ConTeXT MkIV (all platforms) also use these values.
+%
+FONTCONFIG_FILE = fonts.conf
+FONTCONFIG_PATH = $TEXMFSYSVAR/fonts/conf
+FC_CACHEDIR = $TEXMFSYSVAR/fonts/cache
% TeX documentation and source files, for use with texdoc and kpsewhich.
TEXDOCS = $TEXMF/doc//
% would allow command execution.
DVIPDFMXINPUTS = $TEXMF/dvipdfmx
-% Find scripts that are distributed/installed in the texmf tree.
-
% Lua needs to look in TEXINPUTS for lua scripts distributed with packages.
-LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXINPUTS
+%
+% But we can't simply use $TEXINPUTS, since then if TEXINPUTS is set in
+% the environment with a colon, say, TEXINPUTS=/some/dir:, the intended
+% default expansion of TEXINPUTS will not happen and .lua files under
+% the /tex/ will not be found.
+%
+% So, duplicate the TEXINPUTS.*lualatex values as LUAINPUTS.*lualatex.
+% The default LUAINPUTS sufficess for luatex and dviluatex.
+%
+LUAINPUTS.lualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+LUAINPUTS.dvilualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{luatex,plain,generic,}//
% Lua needs to look for binary lua libraries distributed with packages.
CLUAINPUTS = .;$SELFAUTOLOC/lib/{$progname,$engine,}/lua//
% /usr/local/texlive/YYYY/texmf.cnf; any settings in this latter file
% will take precedence over the distributed one under texmf/web2c.
%
-% For security reasons, it is better not to include . in this path.
+% For security reasons, it is best not to include . in this path.
+%
+% The idea behind this lengthy definition: for each of
+% SELFAUTO{LOC,DIR,AUTO}, look in the directory,
+% then the subdirectories share/texmf-local and share/texmf,
+% then ./texmf-local and ./texmf.
+%
+% However, we want to include one more directory: the
+% great-grandparent's texmf-local, because that is how TL is installed
+% by default. That is, given a binary
+% /usr/local/texlive/YYYY/bin/PLATFORM/kpsewhich, it should find
+% /usr/local/texlive/texmf-local/web2c/texmf.cnf. I.e., not under YYYY.
+%
+% As a result, we cannot use actual brace expansion in the definition,
+% since we don't want to scatter ../'s throughout the value. Hence we
+% explicitly list every directory. Arguably more understandable this
+% way anyway.
+%
+TEXMFCNF = {\
+$SELFAUTOLOC,\
+$SELFAUTOLOC/share/texmf-local/web2c,$SELFAUTOLOC/share/texmf/web2c,\
+$SELFAUTOLOC/texmf-local/web2c,$SELFAUTOLOC/texmf/web2c,\
+$SELFAUTODIR,\
+$SELFAUTODIR/share/texmf-local/web2c,$SELFAUTODIR/share/texmf/web2c,\
+$SELFAUTODIR/texmf-local/web2c,$SELFAUTODIR/texmf/web2c,\
+$SELFAUTOPARENT/../texmf-local/web2c,\
+$SELFAUTOPARENT,\
+$SELFAUTOPARENT/share/texmf-local/web2c,$SELFAUTOPARENT/share/texmf/web2c,\
+$SELFAUTOPARENT/texmf-local/web2c,$SELFAUTOPARENT/texmf/web2c\
+}
%
-TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c}
+% For reference, here is the old brace-using definition:
+%TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c}
% kpathsea 3.5.3 and later sets these at runtime. To avoid empty
% expansions from binaries linked against an earlier version of the
-
bibtex,bibtex8,\
kpsewhich,\
makeindex,\
+mpost,\
repstopdf,\
% we'd like to allow:
%TEXLIVE_WINDOWS_TRY_EXTERNAL_PERL = 0
-
% BibTeX only (max_strings also determines hash_size and hash_prime).
ent_str_size = 250
-glob_str_size = 5000
+glob_str_size = 20000
max_strings.bibtex = 35307
max_strings.bibtex8 = 35307
max_strings.bibtexu = 35307
line_length.gftype = 500
max_rows.gftype = 8191
max_cols.gftype = 8191
+
+
-# Generated by /home/texlive/karl/Master/bin/i386-linux/tlmgr on Tue May 31 04:12:04 2011
-# $Id: updmap-hdr.cfg 11382 2008-11-20 18:59:26Z karl $
-#
-# The full updmap.cfg is generated by concatenating updmap-hdr.cfg with
-# all the Map and MixedMap lines from an installation, possibly
-# appending a local configuration file.
-#
-# To make local customizations to the map files, please use of the
-# following methods:
-#
-# 1) call
-# updmap-sys --enable Map=foo.map
-# for each map file. (Or MixedMap instead of Map, if your font has
-# both Metafont and outline definitions.) See the updmap --help
-# documentation.
-#
-# 2) add your local map entries to the file
-# TEXMFLOCAL/web2c/updmap-local.cfg
-# and then call
-# tlmgr generate updmap
-# which will concatenate updmap-local.cfg to the end of the final
-# updmap.cfg. (You can override the local.cfg file location with the
-# --localcfg option; see tlmgr --help.)
-#
-# If you use either of these methods, your local adaptations will be
-# preserved when tlmgr updates the installation or this config file.
-# Manual edits to updmap.cfg may be lost on update.
+# $Id: updmap.cfg 26891 2012-06-10 22:41:49Z karl $
+# updmap.cfg for TEXMFMAIN - updmap options.
################################################################
# the LW35 fonts resp. use the built-in fonts.
#
# Valid settings are true / false:
-dvipsDownloadBase35 false
+dvipsDownloadBase35 true
#
# pdftexDownloadBase14
#
# dvipdfmDownloadBase14
#
-# Should dvipdfm download the base 14 pdf fonts? Since some configurations
+# Should dvipdfm(x) download the base 14 pdf fonts? Since some configurations
# (ps / pdf tools / printers) use bad default fonts, it is safer to download
# the fonts. The pdf files will get bigger, though.
# Valid settings are true (download the fonts) or false (don't download
# the fonts).
dvipdfmDownloadBase14 true
-################################################################
-# Map files.
-################################################################
#
-# There are two possible entries: Map and MixedMap. Both have one additional
-# argument: the filename of the map file. MixedMap ("mixed" means that
-# the font is available as bitmap and as outline) lines will not be used
-# in the default map of dvips if dvipsPreferOutline is false. Inactive
-# Map files should be marked by "#! " (without the quotes), not just #.
+# kanjiEmbed
#
-
-#! Map OrnementsADF.map
-#! Map ArrowsADF.map
-#! Map BulletsADF.map
-#! MixedMap allrunes.map
-#! Map euler.map
-#! MixedMap cm.map
-#! MixedMap cmextra.map
-#! MixedMap cyrillic.map
-#! MixedMap latxfont.map
-#! MixedMap symbols.map
-#! Map uaq.map
-#! Map antt.map
-#! Map arabi.map
-#! MixedMap arabtex.map
-#! Map archaicprw.map
-#! Map arev.map
-#! Map bkaiu.map
-#! Map bsmiu.map
-#! Map gbsnu.map
-#! Map gkaiu.map
-#! Map ascii.map
-#! Map augie.map
-#! Map auncial.map
-#! Map aurical.map
-#! Map ybv.map
-#! MixedMap bbold.map
-#! Map belleek.map
-#! Map bera.map
-#! Map ybd.map
-#! Map sqrcaps.map
-#! Map boondox.map
-#! Map pbsi.map
-#! Map burmese.map
-#! Map cantarell.map
-#! Map cmin.map
-#! MixedMap cbgreek-full.map
-#! MixedMap ccpl.map
-#! Map ccicons.map
-#! Map clm.map
-#! Map chemarrow.map
-#! Map cjhebrew.map
-#! MixedMap cmtext-bsr-interpolated.map
-#! Map cm-lgc.map
-#! MixedMap cm-super-t1.map
-#! MixedMap cm-super-t2a.map
-#! MixedMap cm-super-t2b.map
-#! MixedMap cm-super-t2c.map
-#! MixedMap cm-super-ts1.map
-#! MixedMap cm-super-x2.map
-#! Map cmcyr.map
-#! MixedMap cmll.map
-#! Map comfortaa.map
-#! Map original-context-symbol.map
-#! MixedMap csother.map
-#! MixedMap cstext.map
-#! Map cyklop.map
-#! Map dictsym.map
-#! Map dstroke.map
-#! Map droid.map
-#! Map yes.map
-#! Map epigrafica.map
-#! Map epiolmec.map
-#! MixedMap esint.map
-#! Map ESSTIX.map
-#! Map esvect.map
-#! MixedMap ethiop.map
-#! MixedMap eurosym.map
-#! Map fdsymbol.map
-#! Map fge.map
-#! Map foekfont.map
-#! Map fonetika.map
-#! Map fourier-utopia-expert.map
-#! Map fourier.map
-#! Map garuda-c90.map
-#! Map gfsartemisia.map
-#! Map gfsbaskerville.map
-#! Map gfsbodoni.map
-#! Map gfscomplutum.map
-#! Map gfsdidot.map
-#! Map gfsneohellenic.map
-#! Map gfsporson.map
-#! Map gfssolomos.map
-#! Map yfrak.map
-#! Map ugq.map
-#! Map grverb.map
-#! MixedMap hfbright.map
-#! MixedMap iby.map
-#! Map fi4.map
-#! Map Acorn.map
-#! Map AnnSton.map
-#! Map ArtNouv.map
-#! Map ArtNouvc.map
-#! Map Carrickc.map
-#! Map Eichenla.map
-#! Map Eileen.map
-#! Map EileenBl.map
-#! Map Elzevier.map
-#! Map GotIn.map
-#! Map GoudyIn.map
-#! Map Kinigcap.map
-#! Map Konanur.map
-#! Map Kramer.map
-#! Map MorrisIn.map
-#! Map Nouveaud.map
-#! Map Romantik.map
-#! Map Rothdn.map
-#! Map RoyalIn.map
-#! Map Sanremo.map
-#! Map Starburst.map
-#! Map Typocaps.map
-#! Map Zallman.map
-#! Map iwona.map
-#! Map kerkis.map
-#! Map knitfont.map
-#! Map kpfonts.map
-#! Map kurier.map
-#! Map lato.map
-#! Map libertine.map
-#! Map yly.map
-#! Map linearA.map
-#! Map l7x-urwvn.map
-#! Map lm.map
-#! MixedMap lxfonts.map
-#! MixedMap manfnt.map
-#! Map marvosym.map
-#! Map mathabx.map
-#! Map mdbch.map
-#! Map mdput.map
-#! Map mdugm.map
-#! Map troff-updmap.map
-#! MixedMap mflogo.map
-#! Map MnSymbol.map
-#! MixedMap mongolian.map
-#! MixedMap musix.map
-#! Map norasi-c90.map
-#! Map cherokee.map
-#! Map ocrb.map
-#! Map oinuit.map
-#! Map omega.map
-#! Map phaistos.map
-#! MixedMap pigpen.map
-#! MixedMap plother.map
-#! MixedMap pltext.map
-#! Map ap.map
-#! Map prodint.map
-#! Map charter.map
-#! Map fpls.map
-#! Map pazo.map
-#! Map utopia.map
-#! Map PTSans-type1.map
-#! Map PTSerif-type1.map
-#! Map pxfonts.map
-#! Map recycle.map
-#! Map yrd.map
-#! MixedMap rsfs.map
-#! Map skt.map
-#! MixedMap semaf.map
-#! Map SkakNew.map
-#! Map starfont.map
-#! Map icelandic.map
-#! MixedMap stmaryrd.map
-#! Map tabvar.map
-Map mathpple.map
-#! Map qag.map
-#! Map qbk.map
-#! Map qcr.map
-#! Map qcs.map
-#! Map qhv.map
-#! Map qpl.map
-#! Map qtm.map
-#! Map qzc.map
-#! Map tfrupee.map
-#! MixedMap tipa.map
-#! MixedMap trajan.map
-#! Map txfonts.map
-#! Map gptimes.map
-#! Map umj.map
-#! MixedMap dvng.map
-#! Map yv1.map
-#! Map yv2.map
-#! Map yv3.map
-#! Map yvo.map
-#! Map yvt.map
-#! Map arevvn.map
-#! Map chartervn.map
-#! Map cmbrightvn.map
-#! Map concretevn.map
-#! Map grotesqvn.map
-#! Map txttvn.map
-#! Map urwvn.map
-#! MixedMap vnrother.map
-#! MixedMap vnrtext.map
-#! Map vntopia.map
-#! Map dgj.map
-#! Map dmj.map
-#! Map mc2j.map
-#! Map mcj.map
-#! Map mr2j.map
-#! Map mrj.map
-#! MixedMap wasy.map
-#! MixedMap xypic.map
-#! MixedMap yhmath.map
+# updmap generates a file kanjix.map for usage with dvipdfmx. With this
+# option one can switch between not embedding any kanji font, or
+# any of the several available.
+# Valid setting is any string. At updmap run time the @kanjiEmbed@ substring
+# in a map file name will be replaced with this value, and the respective
+# map file used.
+kanjiEmbed noEmbed
Map archaicprw.map
Map arev.map
Map ascii.map
+Map aspectratio.map
Map augie.map
Map auncial.map
Map aurical.map
Map belleek.map
Map bera.map
Map ybd.map
+Map bguq.map
Map sqrcaps.map
Map boondox.map
Map pbsi.map
+Map calligra.map
Map cantarell.map
Map cmin.map
Map ccicons.map
Map cm-lgc.map
MixedMap cmll.map
Map comfortaa.map
+Map CountriesOfEurope.map
Map cyklop.map
+Map dejavu-type1.map
Map dictsym.map
Map dstroke.map
Map droid.map
+Map dutchcal.map
Map yes.map
Map epigrafica.map
Map ESSTIX.map
Map fonetika.map
Map fourier.map
Map fourier-utopia-expert.map
+Map frcursive.map
Map gfsartemisia.map
Map gfsbodoni.map
Map gfscomplutum.map
Map mdbch.map
Map mdput.map
Map mdugm.map
+Map mdsymbol.map
Map MnSymbol.map
+Map ntx.map
Map cherokee.map
Map ocrb.map
Map oinuit.map
+Map opensans.map
+Map paratype-type1.map
Map phaistos.map
MixedMap pigpen.map
Map ap.map
Map prodint.map
-Map PTSans-type1.map
-Map PTSerif-type1.map
+Map pxtx.map
Map recycle.map
Map yrd.map
+Map rsfso.map
+Map sansmathaccent.map
MixedMap semaf.map
Map starfont.map
Map icelandic.map
-# $Id: updmap-hdr.cfg 11382 2008-11-20 18:59:26Z karl $
+# $Id: updmap-hdr.cfg 26891 2012-06-10 22:41:49Z karl $
#
-# The full updmap.cfg is generated by concatenating updmap-hdr.cfg with
-# all the Map and MixedMap lines from an installation, possibly
-# appending a local configuration file.
+# The updmap.cfg in this tree (TEXMFDIST) is generated by tlmgr by
+# concatenating updmap-hdr.cfg with all updmap.cfg files found.
#
-# To make local customizations to the map files, please use of the
-# following methods:
+# To make local customizations to the map files, using one of the
+# following methods is simplest:
#
-# 1) call
+# 1) run
# updmap-sys --enable Map=foo.map
# for each map file. (Or MixedMap instead of Map, if your font has
# both Metafont and outline definitions.) See the updmap --help
-# documentation.
+# documentation. This will add lines to the updmap.cfg file in
+# TEXMFSYSCONFIG (creating it if necessary).
#
-# 2) add your local map entries to the file
-# TEXMFLOCAL/web2c/updmap-local.cfg
-# and then call
-# tlmgr generate updmap
-# which will concatenate updmap-local.cfg to the end of the final
-# updmap.cfg. (You can override the local.cfg file location with the
-# --localcfg option; see tlmgr --help.)
+# 2) put all your additional fonts into TEXMFLOCAL, edit
+# TEXMFLOCAL/web2c/updmap.cfg, and run updmap-sys.
#
-# If you use either of these methods, your local adaptations will be
-# preserved when tlmgr updates the installation or this config file.
-# Manual edits to updmap.cfg may be lost on update.
-
-
-################################################################
-# OPTIONS
-################################################################
-
-#
-# dvipsPreferOutline
-#
-# Should dvips (by default) prefer bitmap fonts or outline fonts
-# if both are available? Independent of this setting, outlines
-# can be forced by putting "p psfonts_t1.map" into a config file
-# that dvips reads. Bitmaps (for the fonts in question) can
-# be forced by putting "p psfonts_pk.map" into a config file.
-# We provide such config files which can be enabled via
-# dvips -Poutline ... resp. dvips -Ppk ...
-#
-# Valid settings for dvipsPreferOutline are true / false:
-dvipsPreferOutline true
-
-#
-# LW35
-#
-# Which fonts for the "Basic 35 Laserwriter Fonts" do you want to use and
-# how are the filenames chosen? Valid settings:
-# URW: URW fonts with "vendor" filenames (e.g. n019064l.pfb)
-# URWkb: URW fonts with "berry" filenames (e.g. uhvbo8ac.pfb)
-# ADOBE: Adobe fonts with "vendor" filenames (e.g. hvnbo___.pfb)
-# ADOBEkb: Adobe fonts with "berry" filenames (e.g. phvbo8an.pfb)
-LW35 URWkb
-
-#
-# dvipsDownloadBase35
+# See the output of updmap --help and/or
+# http://tug.org/fonts/fontinstall.html for more.
#
-# Should dvips (by default) download the standard 35 LaserWriter fonts
-# with the document (then set dvipsDownloadBase35 true) or should these
-# fonts be used from the ps interpreter / printer?
-# Whatever the default is, the user can override it by specifying
-# dvips -Pdownload35 ... resp. dvips -Pbuiltin35 ... to either download
-# the LW35 fonts resp. use the built-in fonts.
-#
-# Valid settings are true / false:
-dvipsDownloadBase35 false
-
-#
-# pdftexDownloadBase14
-#
-# Should pdftex download the base 14 pdf fonts? Since some configurations
-# (ps / pdf tools / printers) use bad default fonts, it is safer to download
-# the fonts. The pdf files will get bigger, though.
-# Valid settings are true (download the fonts) or false (don't download
-# the fonts). Adobe recommends embedding all fonts.
-pdftexDownloadBase14 true
-
-#
-# dvipdfmDownloadBase14
-#
-# Should dvipdfm download the base 14 pdf fonts? Since some configurations
-# (ps / pdf tools / printers) use bad default fonts, it is safer to download
-# the fonts. The pdf files will get bigger, though.
-# Valid settings are true (download the fonts) or false (don't download
-# the fonts).
-dvipdfmDownloadBase14 true
-
-################################################################
-# Map files.
-################################################################
-#
-# There are two possible entries: Map and MixedMap. Both have one additional
-# argument: the filename of the map file. MixedMap ("mixed" means that
-# the font is available as bitmap and as outline) lines will not be used
-# in the default map of dvips if dvipsPreferOutline is false. Inactive
-# Map files should be marked by "#! " (without the quotes), not just #.
+# In any case, manual edits to TL's updmap.cfg files, psfonts.map,
+# pdftex.map, etc., will be lost on update. So don't do that.
#
-
+# The default settings of the updmap options (not maps) are specified in
+# TEXMFMAIN/web2c/updmap.cfg and can be overridden by an updmap.cfg in
+# any other tree.
% If you modify this original file, YOUR CHANGES WILL BE LOST when it is
% updated. Instead, put your changes -- and only your changes, not an
% entire copy of the full texmf.cnf! -- in ../../texmf.cnf. That is, if
-% this file is installed in /some/path/to/texlive/2011/texmf/web2c/texmf.cnf,
-% add your custom settings to /some/path/to/texlive/2011/texmf.cnf.
+% this file is installed in /some/path/to/texlive/2012/texmf/web2c/texmf.cnf,
+% add your custom settings to /some/path/to/texlive/2012/texmf.cnf.
%
% What follows is a super-summary of what this .cnf file can
% contain. Please read the Kpathsea manual for more information.
% use of this.
+
% \f Part 1: Search paths and directories.
% This is the parent directory of our several trees, i.e.,
% (http://tug.org/tds), or files may not be found.
%
% Redistributors will probably want $SELFAUTODIR/share, i.e., /usr/share.
+% Kpathsea sets SELFAUTOLOC (the directory with the binary),
+% SELFAUTODIR (its parent), and SELFAUTOPARENT (its grandparent).
TEXMFROOT = $SELFAUTODIR/share
% The tree containing runtime files related to the specific
TEXINPUTS.omega = .;$TEXMF/tex/{plain,generic,}//
% p(La)TeX.
-TEXINPUTS.ptex = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}//
-TEXINPUTS.platex = .;$TEXMF/tex/{platex,ptexgeneric,latex,generic,}//
+TEXINPUTS.ptex = .;$TEXMF/tex/{ptex,plain,generic,}//
+TEXINPUTS.platex = .;$TEXMF/tex/{platex,latex,generic,}//
+
+% epTeX, and for pmpost.
+TEXINPUTS.eptex = .;$TEXMF/tex/{ptex,plain,generic,}//
+TEX.pmpost = eptex
-% epTeX.
-TEXINPUTS.eptex = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}//
+% (e)up(La)TeX.
+TEXINPUTS.uplatex = .;$TEXMF/tex/{uplatex,platex,latex,generic,}//
+TEXINPUTS.uptex = .;$TEXMF/tex/{uptex,ptex,plain,generic,}//
+TEXINPUTS.euptex = .;$TEXMF/tex/{uptex,ptex,plain,generic}//
% pBibTeX bibliographies and style files.
BIBINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bib//
MLBIBINPUTS = .;$TEXMF/bibtex/bib/{mlbib,}//
MLBSTINPUTS = .;$TEXMF/bibtex/{mlbst,bst}//
+% .ris and .bltxml bibliography formats.
+RISINPUTS = .;$TEXMF/bibtex/ris//
+BLTXMLINPUTS = .;$TEXMF/bibtex/bltxml//
+
% MFT style files.
MFTINPUTS = .;$TEXMF/mft//
MIMELIBDIR = $SELFAUTOPARENT/etc
MAILCAPLIBDIR = $SELFAUTOPARENT/etc
-% Default settings for fontconfig library, used by Windows versions of
-% xetex/xdvipdfmx. On Unixish systems, fontconfig ignores this.
-FONTCONFIG_FILE=fonts.conf
-FONTCONFIG_PATH=$TEXMFSYSVAR/fonts/conf
-FC_CACHEDIR=$TEXMFSYSVAR/fonts/cache
+% Default settings for the fontconfig library as used by the Windows
+% versions of xetex/xdvipdfmx. On Unixish systems, fontconfig ignores
+% this. ConTeXT MkIV (all platforms) also use these values.
+%
+FONTCONFIG_FILE = fonts.conf
+FONTCONFIG_PATH = $TEXMFSYSVAR/fonts/conf
+FC_CACHEDIR = $TEXMFSYSVAR/fonts/cache
% TeX documentation and source files, for use with texdoc and kpsewhich.
TEXDOCS = $TEXMF/doc//
% would allow command execution.
DVIPDFMXINPUTS = $TEXMF/dvipdfmx
-% Find scripts that are distributed/installed in the texmf tree.
-
% Lua needs to look in TEXINPUTS for lua scripts distributed with packages.
-LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXINPUTS
+%
+% But we can't simply use $TEXINPUTS, since then if TEXINPUTS is set in
+% the environment with a colon, say, TEXINPUTS=/some/dir:, the intended
+% default expansion of TEXINPUTS will not happen and .lua files under
+% the /tex/ will not be found.
+%
+% So, duplicate the TEXINPUTS.*lualatex values as LUAINPUTS.*lualatex.
+% The default LUAINPUTS sufficess for luatex and dviluatex.
+%
+LUAINPUTS.lualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+LUAINPUTS.dvilualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{luatex,plain,generic,}//
% Lua needs to look for binary lua libraries distributed with packages.
CLUAINPUTS = .;$SELFAUTOLOC/lib/{$progname,$engine,}/lua//
% /usr/local/texlive/YYYY/texmf.cnf; any settings in this latter file
% will take precedence over the distributed one under texmf/web2c.
%
-% For security reasons, it is better not to include . in this path.
+% For security reasons, it is best not to include . in this path.
%
-TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c}
+% The idea behind this lengthy definition: for each of
+% SELFAUTO{LOC,DIR,AUTO}, look in the directory,
+% then the subdirectories share/texmf-local and share/texmf,
+% then ./texmf-local and ./texmf.
+%
+% However, we want to include one more directory: the
+% great-grandparent's texmf-local, because that is how TL is installed
+% by default. That is, given a binary
+% /usr/local/texlive/YYYY/bin/PLATFORM/kpsewhich, it should find
+% /usr/local/texlive/texmf-local/web2c/texmf.cnf. I.e., not under YYYY.
+%
+% As a result, we cannot use actual brace expansion in the definition,
+% since we don't want to scatter ../'s throughout the value. Hence we
+% explicitly list every directory. Arguably more understandable this
+% way anyway.
+%
+TEXMFCNF = {\
+$SELFAUTOLOC,\
+$SELFAUTOLOC/share/texmf-local/web2c,$SELFAUTOLOC/share/texmf/web2c,\
+$SELFAUTOLOC/texmf-local/web2c,$SELFAUTOLOC/texmf/web2c,\
+$SELFAUTODIR,\
+$SELFAUTODIR/share/texmf-local/web2c,$SELFAUTODIR/share/texmf/web2c,\
+$SELFAUTODIR/texmf-local/web2c,$SELFAUTODIR/texmf/web2c,\
+$SELFAUTOPARENT/../texmf-local/web2c,\
+$SELFAUTOPARENT,\
+$SELFAUTOPARENT/share/texmf-local/web2c,$SELFAUTOPARENT/share/texmf/web2c,\
+$SELFAUTOPARENT/texmf-local/web2c,$SELFAUTOPARENT/texmf/web2c\
+}
+%
+% For reference, here is the old brace-using definition:
+%TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c}
% kpathsea 3.5.3 and later sets these at runtime. To avoid empty
% expansions from binaries linked against an earlier version of the
-
% \f Part 2: Options.
% If this option is set to true, `tex a.b' will look first for a.b.tex
bibtex,bibtex8,\
kpsewhich,\
makeindex,\
+mpost,\
repstopdf,\
% we'd like to allow:
%TEXLIVE_WINDOWS_TRY_EXTERNAL_PERL = 0
-
% \f Part 3: Array and other sizes for TeX (and Metafont).
%
% If you want to change some of these sizes only for a certain TeX
% BibTeX only (max_strings also determines hash_size and hash_prime).
ent_str_size = 250
-glob_str_size = 5000
+glob_str_size = 20000
max_strings.bibtex = 35307
max_strings.bibtex8 = 35307
max_strings.bibtexu = 35307
line_length.gftype = 500
max_rows.gftype = 8191
max_cols.gftype = 8191
+
+
% -- tex4ht configuration params added by texmf-update --
TEX4HTINPUTS=.;$TEXMF/tex4ht/base//;$TEXMF/tex4ht/ht-fonts//
T4HTINPUTS=.;$TEXMF/tex4ht/base//
-# Generated by /home/texlive/karl/Master/bin/i386-linux/tlmgr on Tue May 31 04:12:04 2011
-# $Id: updmap-hdr.cfg 11382 2008-11-20 18:59:26Z karl $
-#
-# The full updmap.cfg is generated by concatenating updmap-hdr.cfg with
-# all the Map and MixedMap lines from an installation, possibly
-# appending a local configuration file.
-#
-# To make local customizations to the map files, please use of the
-# following methods:
-#
-# 1) call
-# updmap-sys --enable Map=foo.map
-# for each map file. (Or MixedMap instead of Map, if your font has
-# both Metafont and outline definitions.) See the updmap --help
-# documentation.
-#
-# 2) add your local map entries to the file
-# TEXMFLOCAL/web2c/updmap-local.cfg
-# and then call
-# tlmgr generate updmap
-# which will concatenate updmap-local.cfg to the end of the final
-# updmap.cfg. (You can override the local.cfg file location with the
-# --localcfg option; see tlmgr --help.)
-#
-# If you use either of these methods, your local adaptations will be
-# preserved when tlmgr updates the installation or this config file.
-# Manual edits to updmap.cfg may be lost on update.
+# $Id: updmap.cfg 26891 2012-06-10 22:41:49Z karl $
+# updmap.cfg for TEXMFMAIN - updmap options.
################################################################
# the LW35 fonts resp. use the built-in fonts.
#
# Valid settings are true / false:
-dvipsDownloadBase35 false
+dvipsDownloadBase35 true
#
# pdftexDownloadBase14
#
# dvipdfmDownloadBase14
#
-# Should dvipdfm download the base 14 pdf fonts? Since some configurations
+# Should dvipdfm(x) download the base 14 pdf fonts? Since some configurations
# (ps / pdf tools / printers) use bad default fonts, it is safer to download
# the fonts. The pdf files will get bigger, though.
# Valid settings are true (download the fonts) or false (don't download
# the fonts).
dvipdfmDownloadBase14 true
-################################################################
-# Map files.
-################################################################
#
-# There are two possible entries: Map and MixedMap. Both have one additional
-# argument: the filename of the map file. MixedMap ("mixed" means that
-# the font is available as bitmap and as outline) lines will not be used
-# in the default map of dvips if dvipsPreferOutline is false. Inactive
-# Map files should be marked by "#! " (without the quotes), not just #.
+# kanjiEmbed
#
-
-#! Map OrnementsADF.map
-#! Map ArrowsADF.map
-#! Map BulletsADF.map
-#! MixedMap allrunes.map
-#! Map euler.map
-#! MixedMap cm.map
-#! MixedMap cmextra.map
-#! MixedMap cyrillic.map
-#! MixedMap latxfont.map
-#! MixedMap symbols.map
-#! Map uaq.map
-#! Map antt.map
-#! Map arabi.map
-#! MixedMap arabtex.map
-#! Map archaicprw.map
-#! Map arev.map
-#! Map bkaiu.map
-#! Map bsmiu.map
-#! Map gbsnu.map
-#! Map gkaiu.map
-#! Map ascii.map
-#! Map augie.map
-#! Map auncial.map
-#! Map aurical.map
-#! Map ybv.map
-#! MixedMap bbold.map
-#! Map belleek.map
-#! Map bera.map
-#! Map ybd.map
-#! Map sqrcaps.map
-#! Map boondox.map
-#! Map pbsi.map
-#! Map burmese.map
-#! Map cantarell.map
-#! Map cmin.map
-#! MixedMap cbgreek-full.map
-#! MixedMap ccpl.map
-#! Map ccicons.map
-#! Map clm.map
-#! Map chemarrow.map
-#! Map cjhebrew.map
-#! MixedMap cmtext-bsr-interpolated.map
-#! Map cm-lgc.map
-#! MixedMap cm-super-t1.map
-#! MixedMap cm-super-t2a.map
-#! MixedMap cm-super-t2b.map
-#! MixedMap cm-super-t2c.map
-#! MixedMap cm-super-ts1.map
-#! MixedMap cm-super-x2.map
-#! Map cmcyr.map
-#! MixedMap cmll.map
-#! Map comfortaa.map
-#! Map original-context-symbol.map
-#! MixedMap csother.map
-#! MixedMap cstext.map
-#! Map cyklop.map
-#! Map dictsym.map
-#! Map dstroke.map
-#! Map droid.map
-#! Map yes.map
-#! Map epigrafica.map
-#! Map epiolmec.map
-#! MixedMap esint.map
-#! Map ESSTIX.map
-#! Map esvect.map
-#! MixedMap ethiop.map
-#! MixedMap eurosym.map
-#! Map fdsymbol.map
-#! Map fge.map
-#! Map foekfont.map
-#! Map fonetika.map
-#! Map fourier-utopia-expert.map
-#! Map fourier.map
-#! Map garuda-c90.map
-#! Map gfsartemisia.map
-#! Map gfsbaskerville.map
-#! Map gfsbodoni.map
-#! Map gfscomplutum.map
-#! Map gfsdidot.map
-#! Map gfsneohellenic.map
-#! Map gfsporson.map
-#! Map gfssolomos.map
-#! Map yfrak.map
-#! Map ugq.map
-#! Map grverb.map
-#! MixedMap hfbright.map
-#! MixedMap iby.map
-#! Map fi4.map
-#! Map Acorn.map
-#! Map AnnSton.map
-#! Map ArtNouv.map
-#! Map ArtNouvc.map
-#! Map Carrickc.map
-#! Map Eichenla.map
-#! Map Eileen.map
-#! Map EileenBl.map
-#! Map Elzevier.map
-#! Map GotIn.map
-#! Map GoudyIn.map
-#! Map Kinigcap.map
-#! Map Konanur.map
-#! Map Kramer.map
-#! Map MorrisIn.map
-#! Map Nouveaud.map
-#! Map Romantik.map
-#! Map Rothdn.map
-#! Map RoyalIn.map
-#! Map Sanremo.map
-#! Map Starburst.map
-#! Map Typocaps.map
-#! Map Zallman.map
-#! Map iwona.map
-#! Map kerkis.map
-#! Map knitfont.map
-#! Map kpfonts.map
-#! Map kurier.map
-#! Map lato.map
-#! Map libertine.map
-#! Map yly.map
-#! Map linearA.map
-#! Map l7x-urwvn.map
-#! Map lm.map
-#! MixedMap lxfonts.map
-#! MixedMap manfnt.map
-#! Map marvosym.map
-#! Map mathabx.map
-#! Map mdbch.map
-#! Map mdput.map
-#! Map mdugm.map
-#! Map troff-updmap.map
-#! MixedMap mflogo.map
-#! Map MnSymbol.map
-#! MixedMap mongolian.map
-#! MixedMap musix.map
-#! Map norasi-c90.map
-#! Map cherokee.map
-#! Map ocrb.map
-#! Map oinuit.map
-#! Map omega.map
-#! Map phaistos.map
-#! MixedMap pigpen.map
-#! MixedMap plother.map
-#! MixedMap pltext.map
-#! Map ap.map
-#! Map prodint.map
-#! Map charter.map
-#! Map fpls.map
-#! Map pazo.map
-#! Map utopia.map
-#! Map PTSans-type1.map
-#! Map PTSerif-type1.map
-#! Map pxfonts.map
-#! Map recycle.map
-#! Map yrd.map
-#! MixedMap rsfs.map
-#! Map skt.map
-#! MixedMap semaf.map
-#! Map SkakNew.map
-#! Map starfont.map
-#! Map icelandic.map
-#! MixedMap stmaryrd.map
-#! Map tabvar.map
-Map mathpple.map
-#! Map qag.map
-#! Map qbk.map
-#! Map qcr.map
-#! Map qcs.map
-#! Map qhv.map
-#! Map qpl.map
-#! Map qtm.map
-#! Map qzc.map
-#! Map tfrupee.map
-#! MixedMap tipa.map
-#! MixedMap trajan.map
-#! Map txfonts.map
-#! Map gptimes.map
-#! Map umj.map
-#! MixedMap dvng.map
-#! Map yv1.map
-#! Map yv2.map
-#! Map yv3.map
-#! Map yvo.map
-#! Map yvt.map
-#! Map arevvn.map
-#! Map chartervn.map
-#! Map cmbrightvn.map
-#! Map concretevn.map
-#! Map grotesqvn.map
-#! Map txttvn.map
-#! Map urwvn.map
-#! MixedMap vnrother.map
-#! MixedMap vnrtext.map
-#! Map vntopia.map
-#! Map dgj.map
-#! Map dmj.map
-#! Map mc2j.map
-#! Map mcj.map
-#! Map mr2j.map
-#! Map mrj.map
-#! MixedMap wasy.map
-#! MixedMap xypic.map
-#! MixedMap yhmath.map
+# updmap generates a file kanjix.map for usage with dvipdfmx. With this
+# option one can switch between not embedding any kanji font, or
+# any of the several available.
+# Valid setting is any string. At updmap run time the @kanjiEmbed@ substring
+# in a map file name will be replaced with this value, and the respective
+# map file used.
+kanjiEmbed noEmbed
Map euler.map
MixedMap cmextra.map
MixedMap cm.map
Map archaicprw.map
Map arev.map
Map ascii.map
+Map aspectratio.map
Map augie.map
Map auncial.map
Map aurical.map
Map belleek.map
Map bera.map
Map ybd.map
+Map bguq.map
Map sqrcaps.map
Map boondox.map
Map pbsi.map
+Map calligra.map
Map cantarell.map
Map cmin.map
Map ccicons.map
Map cm-lgc.map
MixedMap cmll.map
Map comfortaa.map
+Map CountriesOfEurope.map
Map cyklop.map
+Map dejavu-type1.map
Map dictsym.map
Map dstroke.map
Map droid.map
+Map dutchcal.map
Map yes.map
Map epigrafica.map
Map ESSTIX.map
Map fonetika.map
Map fourier.map
Map fourier-utopia-expert.map
+Map frcursive.map
Map gfsartemisia.map
Map gfsbodoni.map
Map gfscomplutum.map
Map mdbch.map
Map mdput.map
Map mdugm.map
+Map mdsymbol.map
Map MnSymbol.map
+Map ntx.map
Map cherokee.map
Map ocrb.map
Map oinuit.map
+Map opensans.map
+Map paratype-type1.map
Map phaistos.map
MixedMap pigpen.map
Map ap.map
Map prodint.map
-Map PTSans-type1.map
-Map PTSerif-type1.map
+Map pxtx.map
Map recycle.map
Map yrd.map
+Map rsfso.map
+Map sansmathaccent.map
MixedMap semaf.map
Map starfont.map
Map icelandic.map
WebBrowser=firefox
MailReader=thunderbird
-TerminalEmulator=Terminal
+TerminalEmulator=xfce4-terminal
FileManager=Thunar
projects / config / samara / etc.git / commitdiff