maybe chmod 0644 'apache2/magic'
maybe chmod 0755 'apache2/modules.d'
maybe chmod 0755 'apache2/modules.d.old'
+maybe chmod 0644 'apache2/modules.d/._mrg0000_00_mod_autoindex.conf'
maybe chmod 0700 'apache2/modules.d/.rcs'
maybe chmod 0444 'apache2/modules.d/.rcs/00_apache_manual.conf,v'
maybe chmod 0444 'apache2/modules.d/.rcs/00_default_settings.conf,v'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_apache_manual.conf,v'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_default_settings.conf'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_default_settings.conf,v'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_default_settings.conf.1'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_default_settings.conf.dist'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_default_settings.conf.dist.new'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_error_documents.conf'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_error_documents.conf,v'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_error_documents.conf.dist.new'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_languages.conf.dist.new'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mod_autoindex.conf'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mod_autoindex.conf,v'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mod_autoindex.conf.1'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mod_autoindex.conf.dist'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mod_autoindex.conf.dist.new'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mod_info.conf'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mod_info.conf,v'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mod_info.conf.dist.new'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mpm.conf'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mpm.conf,v'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mpm.conf.dist.new'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/20_mod_fastcgi.conf'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/20_mod_fastcgi.conf.dist.new'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/20_mod_fcgid.conf'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/20_mod_fcgid.conf.dist.new'
maybe chmod 0644 'config-archive/etc/apache2/modules.d/47_mod_dav_svn.conf'
maybe chmod 0755 'config-archive/etc/elinks'
maybe chmod 0644 'config-archive/etc/elinks/elinks.conf,v'
maybe chmod 0644 'config-archive/etc/etc-update.conf,v'
+maybe chmod 0755 'config-archive/etc/etckeeper'
+maybe chmod 0644 'config-archive/etc/etckeeper/etckeeper.conf'
+maybe chmod 0644 'config-archive/etc/etckeeper/etckeeper.conf.dist.new'
maybe chmod 0755 'config-archive/etc/fonts'
maybe chmod 0755 'config-archive/etc/fonts/conf.avail'
maybe chmod 0644 'config-archive/etc/fonts/conf.avail/30-urw-aliases.conf,v'
maybe chmod 0644 'config-archive/etc/ssh/ssh_config'
maybe chmod 0644 'config-archive/etc/ssh/ssh_config,v'
maybe chmod 0644 'config-archive/etc/ssh/ssh_config.1'
+maybe chmod 0644 'config-archive/etc/ssh/ssh_config.2'
maybe chmod 0644 'config-archive/etc/ssh/ssh_config.dist'
maybe chmod 0600 'config-archive/etc/ssh/sshd_config'
maybe chmod 0644 'config-archive/etc/ssh/sshd_config,v'
maybe chmod 0600 'config-archive/etc/ssh/sshd_config.2'
maybe chmod 0600 'config-archive/etc/ssh/sshd_config.3'
maybe chmod 0600 'config-archive/etc/ssh/sshd_config.4'
+maybe chmod 0600 'config-archive/etc/ssh/sshd_config.5'
maybe chmod 0600 'config-archive/etc/ssh/sshd_config.dist'
+maybe chmod 0600 'config-archive/etc/ssh/sshd_config.dist.new'
maybe chmod 0755 'config-archive/etc/ssl'
maybe chmod 0755 'config-archive/etc/ssl/certs'
maybe chmod 0644 'config-archive/etc/ssl/certs/ca-certificates.crt,v'
maybe chmod 0755 'snmp'
maybe chmod 0644 'snmp/snmpd.conf.example'
maybe chmod 0755 'ssh'
+maybe chmod 0600 'ssh/._mrg0000_sshd_config'
maybe chmod 0644 'ssh/moduli'
maybe chmod 0644 'ssh/ssh_config'
maybe chmod 0600 'ssh/ssh_host_dsa_key'
--- /dev/null
+<IfModule autoindex_module>
+<IfDefine !NO_AUTOINDEX_CONF>
+
+<IfModule alias_module>
+# We include the /icons/ alias for FancyIndexed directory listings. If
+# you do not use FancyIndexing, you may comment this out.
+Alias /icons/ "/usr/share/apache2/icons/"
+
+<Directory "/usr/share/apache2/icons">
+ Options Indexes MultiViews
+ AllowOverride None
+ Require all granted
+</Directory>
+</IfModule>
+
+# Directives controlling the display of server-generated directory listings.
+#
+# To see the listing of a directory, the Options directive for the
+# directory must include "Indexes", and the directory must not contain
+# a file matching those listed in the DirectoryIndex directive.
+
+# IndexOptions: Controls the appearance of server-generated directory
+# listings.
+#IndexOptions FancyIndexing VersionSort
+IndexOptions FancyIndexing VersionSort FoldersFirst HTMLTable IgnoreCase NameWidth=50
+
+# AddIcon* directives tell the server which icon to show for different
+# files or filename extensions. These are only displayed for
+# FancyIndexed directories.
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+AddIconByType (CDR,/icons/corel-document.png) image/x-coreldraw
+
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+AddIcon /icons/bomb.gif core
+
+AddIcon /icons/corel-document.png .cdr
+
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
+
+# DefaultIcon is which icon to show for files which do not have an icon
+# explicitly set.
+DefaultIcon /icons/unknown.gif
+
+# AddDescription allows you to place a short description after a file in
+# server-generated indexes. These are only displayed for FancyIndexed
+# directories.
+# Format: AddDescription "description" filename
+
+AddDescription "GZIP-komprimiertes Tar-Archiv" .tar.gz
+AddDescription "GZIP-komprimiertes Dokument" .gz
+AddDescription "Tar-Archive" .tar
+AddDescription "GZIP-komprimiertes Tar-Archiv" .tgz
+AddDescription "PDF-Dokument" .pdf
+AddDescription "CorelDraw-Zeichnung" .cdr
+
+# ReadmeName is the name of the README file the server will look for by
+# default, and append to directory listings.
+
+# HeaderName is the name of a file which should be prepended to
+# directory indexes.
+ReadmeName README.html
+HeaderName HEADER.html
+
+# IndexIgnore is a set of filenames which directory indexing should ignore
+# and not include in the listing. Shell-style wildcarding is permitted.
+IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+</IfDefine>
+</IfModule>
+
+# vim: ts=4 filetype=apache
-# This is a modification of the default Apache 2.2 configuration file
+# This is a modification of the default Apache 2.4 configuration file
# for Gentoo Linux.
#
# Support:
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
+# See <URL:http://httpd.apache.org/docs/2.4> for detailed information.
# In particular, see
-# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
+# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
+# Comment: The LockFile directive has been replaced by the Mutex directive
ServerRoot "/usr/lib64/apache2"
# Dynamic Shared Object (DSO) Support
#
# Change these at your own risk!
+LoadModule access_compat_module modules/mod_access_compat.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
<IfDefine AUTH_DIGEST>
LoadModule auth_digest_module modules/mod_auth_digest.so
</IfDefine>
-LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
+LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
-LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
<IfDefine AUTHNZ_LDAP>
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
</IfDefine>
+LoadModule authz_core_module modules/mod_authz_core.so
+LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
-LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_owner_module modules/mod_authz_owner.so
<IfDefine CACHE>
LoadModule cache_module modules/mod_cache.so
</IfDefine>
+<IfDefine CACHE>
+LoadModule cache_disk_module modules/mod_cache_disk.so
+</IfDefine>
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
-<IfDefine CACHE>
-LoadModule disk_cache_module modules/mod_disk_cache.so
-</IfDefine>
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
LoadModule expires_module modules/mod_expires.so
</IfDefine>
LoadModule filter_module modules/mod_filter.so
LoadModule headers_module modules/mod_headers.so
+<IfDefine HTTP2>
+LoadModule http2_module modules/mod_http2.so
+</IfDefine>
LoadModule ident_module modules/mod_ident.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
-<IfDefine CACHE>
-LoadModule mem_cache_module modules/mod_mem_cache.so
-</IfDefine>
+LoadModule macro_module modules/mod_macro.so
LoadModule mime_module modules/mod_mime.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
</IfDefine>
<IfDefine PROXY>
+LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
+</IfDefine>
+<IfDefine PROXY>
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
</IfDefine>
<IfDefine PROXY>
+LoadModule proxy_html_module modules/mod_proxy_html.so
+</IfDefine>
+<IfDefine PROXY>
LoadModule proxy_http_module modules/mod_proxy_http.so
</IfDefine>
+<IfDefine PROXY>
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
+</IfDefine>
+<IfDefine PROXY>
+LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
+</IfDefine>
+LoadModule ratelimit_module modules/mod_ratelimit.so
+LoadModule remoteip_module modules/mod_remoteip.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
+LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
+<IfDefine SSL>
+LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
+</IfDefine>
LoadModule speling_module modules/mod_speling.so
<IfDefine SSL>
LoadModule ssl_module modules/mod_ssl.so
LoadModule suexec_module modules/mod_suexec.so
</IfDefine>
LoadModule unique_id_module modules/mod_unique_id.so
+LoadModule unixd_module modules/mod_unixd.so
<IfDefine USERDIR>
LoadModule userdir_module modules/mod_userdir.so
</IfDefine>
# negotiated documents. The MultiViews Options can be used for the
# same purpose, but it is much slower.
#
-# To add files to that list use AddDirectoryIndex in a custom config
-# file. Do not change this entry unless you know what you are doing.
+# Do not change this entry unless you know what you are doing.
<IfModule dir_module>
DirectoryIndex index.html index.html.var index.shtml index.htm
</IfModule>
--- /dev/null
+# This configuration file reflects default settings for Apache HTTP Server.
+# You may change these, but chances are that you may not need to.
+
+# Timeout: The number of seconds before receives and sends time out.
+Timeout 300
+
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+KeepAlive On
+
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+MaxKeepAliveRequests 100
+
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+KeepAliveTimeout 15
+
+# UseCanonicalName: Determines how Apache constructs self-referencing
+# URLs and the SERVER_NAME and SERVER_PORT variables.
+# When set "Off", Apache will use the Hostname and Port supplied
+# by the client. When set "On", Apache will use the value of the
+# ServerName directive.
+UseCanonicalName Off
+
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives. See also the AllowOverride
+# directive.
+AccessFileName .htaccess
+
+# ServerTokens
+# This directive configures what you return as the Server HTTP response
+# Header. The default is 'Full' which sends information about the OS-Type
+# and compiled in modules.
+# Set to one of: Full | OS | Minor | Minimal | Major | Prod
+# where Full conveys the most information, and Prod the least.
+ServerTokens Full
+
+# TraceEnable
+# This directive overrides the behavior of TRACE for both the core server and
+# mod_proxy. The default TraceEnable on permits TRACE requests per RFC 2616,
+# which disallows any request body to accompany the request. TraceEnable off
+# causes the core server and mod_proxy to return a 405 (Method not allowed)
+# error to the client.
+# For security reasons this is turned off by default. (bug #240680)
+TraceEnable off
+
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (internal error documents, FTP directory
+# listings, mod_status and mod_info output etc., but not CGI generated
+# documents or custom error documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of: On | Off | EMail
+ServerSignature On
+
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+HostnameLookups Off
+
+# EnableMMAP and EnableSendfile: On systems that support it,
+# memory-mapping or the sendfile syscall is used to deliver
+# files. This usually improves server performance, but must
+# be turned off when serving from networked-mounted
+# filesystems or if support for these functions is otherwise
+# broken on your system.
+EnableMMAP off
+EnableSendfile off
+#EnableMMAP On
+#EnableSendfile On
+
+# FileEtag: Configures the file attributes that are used to create
+# the ETag (entity tag) response header field when the document is
+# based on a static file. (The ETag value is used in cache management
+# to save network bandwidth.)
+FileEtag INode MTime Size
+
+# ContentDigest: This directive enables the generation of Content-MD5
+# headers as defined in RFC1864 respectively RFC2616.
+# The Content-MD5 header provides an end-to-end message integrity
+# check (MIC) of the entity-body. A proxy or client may check this
+# header for detecting accidental modification of the entity-body
+# in transit.
+# Note that this can cause performance problems on your server since
+# the message digest is computed on every request (the values are
+# not cached).
+# Content-MD5 is only sent for documents served by the core, and not
+# by any module. For example, SSI documents, output from CGI scripts,
+# and byte range responses do not have this header.
+ContentDigest Off
+
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here. If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+ErrorLog /var/log/apache2/error.log
+
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+LogLevel info
+
+# We configure the "default" to be a very restrictive set of features.
+<Directory />
+ Options FollowSymLinks
+ AllowOverride None
+ Order deny,allow
+ Deny from all
+</Directory>
+
+# DirectoryIndex: sets the file that Apache will serve if a directory
+# is requested.
+#
+# The index.html.var file (a type-map) is used to deliver content-
+# negotiated documents. The MultiViews Options can be used for the
+# same purpose, but it is much slower.
+#
+# To add files to that list use AddDirectoryIndex in a custom config
+# file. Do not change this entry unless you know what you are doing.
+<IfModule dir_module>
+ DirectoryIndex index.html index.html.var index.shtml index.htm
+</IfModule>
+
+# The following lines prevent .htaccess and .htpasswd files from being
+# viewed by Web clients.
+<FilesMatch "^\.ht">
+ Order allow,deny
+ Deny from all
+</FilesMatch>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+# This configuration file reflects default settings for Apache HTTP Server.
+# You may change these, but chances are that you may not need to.
+
+# Timeout: The number of seconds before receives and sends time out.
+Timeout 300
+
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+KeepAlive On
+
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+MaxKeepAliveRequests 100
+
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+KeepAliveTimeout 15
+
+# UseCanonicalName: Determines how Apache constructs self-referencing
+# URLs and the SERVER_NAME and SERVER_PORT variables.
+# When set "Off", Apache will use the Hostname and Port supplied
+# by the client. When set "On", Apache will use the value of the
+# ServerName directive.
+UseCanonicalName Off
+
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives. See also the AllowOverride
+# directive.
+AccessFileName .htaccess
+
+# ServerTokens
+# This directive configures what you return as the Server HTTP response
+# Header. The default is 'Full' which sends information about the OS-Type
+# and compiled in modules.
+# Set to one of: Full | OS | Minor | Minimal | Major | Prod
+# where Full conveys the most information, and Prod the least.
+ServerTokens Prod
+
+# TraceEnable
+# This directive overrides the behavior of TRACE for both the core server and
+# mod_proxy. The default TraceEnable on permits TRACE requests per RFC 2616,
+# which disallows any request body to accompany the request. TraceEnable off
+# causes the core server and mod_proxy to return a 405 (Method not allowed)
+# error to the client.
+# For security reasons this is turned off by default. (bug #240680)
+TraceEnable off
+
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (internal error documents, FTP directory
+# listings, mod_status and mod_info output etc., but not CGI generated
+# documents or custom error documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of: On | Off | EMail
+ServerSignature On
+
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+HostnameLookups Off
+
+# EnableMMAP and EnableSendfile: On systems that support it,
+# memory-mapping or the sendfile syscall is used to deliver
+# files. This usually improves server performance, but must
+# be turned off when serving from networked-mounted
+# filesystems or if support for these functions is otherwise
+# broken on your system.
+EnableMMAP On
+EnableSendfile Off
+
+# FileETag: Configures the file attributes that are used to create
+# the ETag (entity tag) response header field when the document is
+# based on a static file. (The ETag value is used in cache management
+# to save network bandwidth.)
+FileETag MTime Size
+
+# ContentDigest: This directive enables the generation of Content-MD5
+# headers as defined in RFC1864 respectively RFC2616.
+# The Content-MD5 header provides an end-to-end message integrity
+# check (MIC) of the entity-body. A proxy or client may check this
+# header for detecting accidental modification of the entity-body
+# in transit.
+# Note that this can cause performance problems on your server since
+# the message digest is computed on every request (the values are
+# not cached).
+# Content-MD5 is only sent for documents served by the core, and not
+# by any module. For example, SSI documents, output from CGI scripts,
+# and byte range responses do not have this header.
+ContentDigest Off
+
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here. If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+ErrorLog /var/log/apache2/error_log
+
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+LogLevel warn
+
+# We configure the "default" to be a very restrictive set of features.
+<Directory />
+ Options FollowSymLinks
+ AllowOverride None
+ Require all denied
+</Directory>
+
+# DirectoryIndex: sets the file that Apache will serve if a directory
+# is requested.
+#
+# The index.html.var file (a type-map) is used to deliver content-
+# negotiated documents. The MultiViews Options can be used for the
+# same purpose, but it is much slower.
+#
+# Do not change this entry unless you know what you are doing.
+<IfModule dir_module>
+ DirectoryIndex index.html index.html.var
+</IfModule>
+
+# The following lines prevent .htaccess and .htpasswd files from being
+# viewed by Web clients.
+<FilesMatch "^\.ht">
+ Require all denied
+</FilesMatch>
+
+# vim: ts=4 filetype=apache
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
- Order allow,deny
- Allow from all
+ Require all granted
LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
ForceLanguagePriority Prefer Fallback
</Directory>
<IfModule autoindex_module>
+<IfDefine !NO_AUTOINDEX_CONF>
+
<IfModule alias_module>
# We include the /icons/ alias for FancyIndexed directory listings. If
# you do not use FancyIndexing, you may comment this out.
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+</IfDefine>
</IfModule>
# vim: ts=4 filetype=apache
--- /dev/null
+<IfModule autoindex_module>
+<IfModule alias_module>
+# We include the /icons/ alias for FancyIndexed directory listings. If
+# you do not use FancyIndexing, you may comment this out.
+Alias /icons/ "/usr/share/apache2/icons/"
+
+<Directory "/usr/share/apache2/icons">
+ Options Indexes MultiViews
+ AllowOverride None
+ Order allow,deny
+ Allow from all
+</Directory>
+</IfModule>
+
+# Directives controlling the display of server-generated directory listings.
+#
+# To see the listing of a directory, the Options directive for the
+# directory must include "Indexes", and the directory must not contain
+# a file matching those listed in the DirectoryIndex directive.
+
+# IndexOptions: Controls the appearance of server-generated directory
+# listings.
+#IndexOptions FancyIndexing VersionSort
+IndexOptions FancyIndexing VersionSort FoldersFirst HTMLTable IgnoreCase NameWidth=50
+
+# AddIcon* directives tell the server which icon to show for different
+# files or filename extensions. These are only displayed for
+# FancyIndexed directories.
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+AddIconByType (CDR,/icons/corel-document.png) image/x-coreldraw
+
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+AddIcon /icons/bomb.gif core
+
+AddIcon /icons/corel-document.png .cdr
+
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
+
+# DefaultIcon is which icon to show for files which do not have an icon
+# explicitly set.
+DefaultIcon /icons/unknown.gif
+
+# AddDescription allows you to place a short description after a file in
+# server-generated indexes. These are only displayed for FancyIndexed
+# directories.
+# Format: AddDescription "description" filename
+
+AddDescription "GZIP-komprimiertes Tar-Archiv" .tar.gz
+AddDescription "GZIP-komprimiertes Dokument" .gz
+AddDescription "Tar-Archive" .tar
+AddDescription "GZIP-komprimiertes Tar-Archiv" .tgz
+AddDescription "PDF-Dokument" .pdf
+AddDescription "CorelDraw-Zeichnung" .cdr
+
+# ReadmeName is the name of the README file the server will look for by
+# default, and append to directory listings.
+
+# HeaderName is the name of a file which should be prepended to
+# directory indexes.
+ReadmeName README.html
+HeaderName HEADER.html
+
+# IndexIgnore is a set of filenames which directory indexing should ignore
+# and not include in the listing. Shell-style wildcarding is permitted.
+IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+</IfModule>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+<IfModule autoindex_module>
+<IfDefine !NO_AUTOINDEX_CONF>
+
+<IfModule alias_module>
+# We include the /icons/ alias for FancyIndexed directory listings. If
+# you do not use FancyIndexing, you may comment this out.
+Alias /icons/ "/usr/share/apache2/icons/"
+
+<Directory "/usr/share/apache2/icons">
+ Options Indexes MultiViews
+ AllowOverride None
+ Require all granted
+</Directory>
+</IfModule>
+
+# Directives controlling the display of server-generated directory listings.
+#
+# To see the listing of a directory, the Options directive for the
+# directory must include "Indexes", and the directory must not contain
+# a file matching those listed in the DirectoryIndex directive.
+
+# IndexOptions: Controls the appearance of server-generated directory
+# listings.
+IndexOptions FancyIndexing VersionSort
+
+# AddIcon* directives tell the server which icon to show for different
+# files or filename extensions. These are only displayed for
+# FancyIndexed directories.
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+AddIcon /icons/bomb.gif core
+
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
+
+# DefaultIcon is which icon to show for files which do not have an icon
+# explicitly set.
+DefaultIcon /icons/unknown.gif
+
+# AddDescription allows you to place a short description after a file in
+# server-generated indexes. These are only displayed for FancyIndexed
+# directories.
+# Format: AddDescription "description" filename
+
+#AddDescription "GZIP compressed document" .gz
+#AddDescription "tar archive" .tar
+#AddDescription "GZIP compressed tar archive" .tgz
+
+# ReadmeName is the name of the README file the server will look for by
+# default, and append to directory listings.
+
+# HeaderName is the name of a file which should be prepended to
+# directory indexes.
+ReadmeName README.html
+HeaderName HEADER.html
+
+# IndexIgnore is a set of filenames which directory indexing should ignore
+# and not include in the listing. Shell-style wildcarding is permitted.
+IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+</IfDefine>
+</IfModule>
+
+# vim: ts=4 filetype=apache
# http://servername/server-info
<Location /server-info>
SetHandler server-info
- Order deny,allow
- Deny from all
- Allow from 127.0.0.1
+ Require local
</Location>
</IfDefine>
-# DefaultType: the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value. If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-DefaultType text/plain
-
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
# with the URL of http://servername/server-status
<Location /server-status>
SetHandler server-status
- Order deny,allow
- Deny from all
- Allow from 127.0.0.1
+ Require local
</Location>
# ExtendedStatus controls whether Apache will generate "full" status
# identification number when it starts.
#
# DO NOT CHANGE UNLESS YOU KNOW WHAT YOU ARE DOING
-PidFile /var/run/apache2.pid
+PidFile /run/apache2.pid
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
-#LockFile /var/run/apache2.lock
+# Mutex file:/run/apache_mpm_mutex
# Only one of the below sections will be relevant on your
# installed httpd. Use "/usr/sbin/apache2 -l" to find out the
# These configuration directives apply to all MPMs
#
# StartServers: Number of child server processes created at startup
-# MaxClients: Maximum number of child processes to serve requests
-# MaxRequestsPerChild: Limit on the number of requests that an individual child
-# server will handle during its life
+# MaxRequestWorkers: Maximum number of child processes to serve requests
+# MaxConnectionsPerChild: Limit on the number of connections that an individual
+# child server will handle during its life
# prefork MPM
StartServers 5
MinSpareServers 5
MaxSpareServers 10
- MaxClients 150
- MaxRequestsPerChild 10000
+ MaxRequestWorkers 150
+ MaxConnectionsPerChild 10000
</IfModule>
# worker MPM
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
- MaxClients 150
- MaxRequestsPerChild 10000
+ MaxRequestWorkers 150
+ MaxConnectionsPerChild 10000
</IfModule>
# event MPM
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
- MaxClients 150
- MaxRequestsPerChild 10000
+ MaxRequestWorkers 150
+ MaxConnectionsPerChild 10000
</IfModule>
# peruser MPM
MinSpareProcessors 2
MinProcessors 2
MaxProcessors 10
- MaxClients 150
- MaxRequestsPerChild 1000
+ MaxRequestWorkers 150
+ MaxConnectionsPerChild 1000
ExpireTimeout 1800
Multiplexer nobody nobody
StartServers 5
MinSpareServers 5
MaxSpareServers 10
- MaxClients 150
- MaxRequestsPerChild 10000
+ MaxRequestWorkers 150
+ MaxConnectionsPerChild 10000
</IfModule>
# vim: ts=4 filetype=apache
--- /dev/null
+<IfDefine FASTCGI>
+ LoadModule fastcgi_module modules/mod_fastcgi.so
+ AddHandler fastcgi-script fcg fcgi fpl
+ FastCgiExternalServer /tmp/frbr_books_app.fcgi -socket /tmp/frbr_books_app.sock
+ #FastCgiServer /var/www/books/script/frbr_books_fastcgi.pl -processes 2
+</IfDefine>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+<IfDefine FASTCGI>
+LoadModule fastcgi_module modules/mod_fastcgi.so
+AddHandler fastcgi-script fcg fcgi fpl
+</IfDefine>
+
+# vim: ts=4 filetype=apache
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
-# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
+# <URL:http://httpd.apache.org/docs/2.4/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
#Listen 12.34.56.78:80
Listen 80
-# Use name-based virtual hosting.
-NameVirtualHost *:80
-
# When virtual hosts are enabled, the main host defined in the default
# httpd.conf configuration will go away. We redefine it here so that it is
# still available.
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
- # http://httpd.apache.org/docs/2.2/mod/core.html#options
+ # http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
AllowOverride All
# Controls who can get stuff from this server.
- Order allow,deny
- Allow from all
+ Require all granted
</Directory>
<IfModule alias_module>
<Directory "/var/www/localhost/cgi-bin">
AllowOverride None
Options None
- Order allow,deny
- Allow from all
+ Require all granted
</Directory>
# vim: ts=4 filetype=apache
--- /dev/null
+# The VCS to use.
+#VCS="hg"
+VCS="git"
+#VCS="bzr"
+#VCS="darcs"
+
+# Options passed to git commit when run by etckeeper.
+GIT_COMMIT_OPTIONS=""
+
+# Options passed to hg commit when run by etckeeper.
+HG_COMMIT_OPTIONS=""
+
+# Options passed to bzr commit when run by etckeeper.
+BZR_COMMIT_OPTIONS=""
+
+# Options passed to darcs record when run by etckeeper.
+DARCS_COMMIT_OPTIONS="-a"
+
+# Uncomment to avoid etckeeper committing existing changes
+# to /etc automatically once per day.
+#AVOID_DAILY_AUTOCOMMITS=1
+
+# Uncomment the following to avoid special file warning
+# (the option is enabled automatically by cronjob regardless).
+#AVOID_SPECIAL_FILE_WARNING=1
+
+# Uncomment to avoid etckeeper committing existing changes to
+# /etc before installation. It will cancel the installation,
+# so you can commit the changes by hand.
+#AVOID_COMMIT_BEFORE_INSTALL=1
+
+# The high-level package manager that's being used.
+# (apt, pacman-g2, yum, zypper etc)
+# For gentoo this is emerge
+HIGHLEVEL_PACKAGE_MANAGER=emerge
+
+# The low-level package manager that's being used.
+# (dpkg, rpm, pacman, pacman-g2, etc)
+# For gentoo this is qlist
+LOWLEVEL_PACKAGE_MANAGER=qlist
+
+# To push each commit to a remote, put the name of the remote here.
+# (eg, "origin" for git).
+PUSH_REMOTE="origin"
--- /dev/null
+# The VCS to use.
+#VCS="hg"
+VCS="git"
+#VCS="bzr"
+#VCS="darcs"
+
+# Options passed to git commit when run by etckeeper.
+GIT_COMMIT_OPTIONS=""
+
+# Options passed to hg commit when run by etckeeper.
+HG_COMMIT_OPTIONS=""
+
+# Options passed to bzr commit when run by etckeeper.
+BZR_COMMIT_OPTIONS=""
+
+# Options passed to darcs record when run by etckeeper.
+DARCS_COMMIT_OPTIONS="-a"
+
+# Uncomment to avoid etckeeper committing existing changes
+# to /etc automatically once per day.
+#AVOID_DAILY_AUTOCOMMITS=1
+
+# Uncomment the following to avoid special file warning
+# (the option is enabled automatically by cronjob regardless).
+#AVOID_SPECIAL_FILE_WARNING=1
+
+# Uncomment to avoid etckeeper committing existing changes to
+# /etc before installation. It will cancel the installation,
+# so you can commit the changes by hand.
+#AVOID_COMMIT_BEFORE_INSTALL=1
+
+# The high-level package manager that's being used.
+# (apt, pacman-g2, yum, dnf, zypper etc)
+#HIGHLEVEL_PACKAGE_MANAGER=apt
+
+# Gentoo specific:
+# For portage this is emerge
+# For paludis this is cave
+HIGHLEVEL_PACKAGE_MANAGER=emerge
+
+# The low-level package manager that's being used.
+# (dpkg, rpm, pacman, pacman-g2, etc)
+#LOWLEVEL_PACKAGE_MANAGER=dpkg
+
+# Gentoo specific:
+# For portage this is qlist
+# For paludis this is cave
+LOWLEVEL_PACKAGE_MANAGER=qlist
+
+# To push each commit to a remote, put the name of the remote here.
+# (eg, "origin" for git). Space-separated lists of multiple remotes
+# also work (eg, "origin gitlab github" for git).
+PUSH_REMOTE=""
-# $OpenBSD$
+# $OpenBSD: ssh_config,v 1.28 2013/09/16 11:35:43 sthen Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160
# EscapeChar ~
-# AllowedCertPurpose sslserver
-# MandatoryCRL no
-# CACertificateFile /etc/ssh/ca/ca-bundle.crt
-# CACertificatePath /etc/ssh/ca/crt
-# CARevocationFile /etc/ssh/ca/ca-bundle.crl
-# CARevocationPath /etc/ssh/ca/crl
-# UserCACertificateFile ~/.ssh/ca-bundle.crt
-# UserCACertificatePath ~/.ssh/crt
-# UserCARevocationFile ~/.ssh/ca-bundle.crl
-# UserCARevocationPath ~/.ssh/crl
-# VAType none
# Tunnel no
# TunnelDevice any:any
# PermitLocalCommand no
# PermitLocalCommand no
# VisualHostKey no
# ProxyCommand ssh -q -W %h:%p gateway.example.com
+# RekeyLimit 1G 1h
+
+# Send locale environment variables #367017
+SendEnv LANG LC_*
--- /dev/null
+# $OpenBSD$
+
+# This is the ssh client system-wide configuration file. See
+# ssh_config(5) for more information. This file provides defaults for
+# users, and the values can be changed in per-user configuration files
+# or on the command line.
+
+# Configuration data is parsed as follows:
+# 1. command line options
+# 2. user-specific file
+# 3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# Site-wide defaults for some commonly used options. For a comprehensive
+# list of available options, their meanings and defaults, please see the
+# ssh_config(5) man page.
+
+# Host *
+# ForwardAgent no
+ForwardAgent yes
+# ForwardX11 no
+# RhostsRSAAuthentication no
+# RSAAuthentication yes
+# PasswordAuthentication yes
+# HostbasedAuthentication no
+# GSSAPIAuthentication no
+# GSSAPIDelegateCredentials no
+# BatchMode no
+# CheckHostIP yes
+# AddressFamily any
+# ConnectTimeout 0
+# StrictHostKeyChecking ask
+# IdentityFile ~/.ssh/identity
+# IdentityFile ~/.ssh/id_rsa
+# IdentityFile ~/.ssh/id_dsa
+# Port 22
+# Protocol 2,1
+# Cipher 3des
+# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
+# MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160
+# EscapeChar ~
+# AllowedCertPurpose sslserver
+# MandatoryCRL no
+# CACertificateFile /etc/ssh/ca/ca-bundle.crt
+# CACertificatePath /etc/ssh/ca/crt
+# CARevocationFile /etc/ssh/ca/ca-bundle.crl
+# CARevocationPath /etc/ssh/ca/crl
+# UserCACertificateFile ~/.ssh/ca-bundle.crt
+# UserCACertificatePath ~/.ssh/crt
+# UserCARevocationFile ~/.ssh/ca-bundle.crl
+# UserCARevocationPath ~/.ssh/crl
+# VAType none
+# Tunnel no
+# TunnelDevice any:any
+# PermitLocalCommand no
+# VisualHostKey no
+# ProxyCommand ssh -q -W %h:%p gateway.example.com
-# $OpenBSD: ssh_config,v 1.28 2013/09/16 11:35:43 sthen Exp $
+# $OpenBSD: ssh_config,v 1.30 2016/02/20 23:06:23 sobrado Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
+# IdentityFile ~/.ssh/id_ecdsa
+# IdentityFile ~/.ssh/id_ed25519
# Port 22
-# Protocol 2,1
+# Protocol 2
# Cipher 3des
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160
-# $OpenBSD: sshd_config,v 1.95 2015/04/27 21:42:48 djm Exp $
+# $OpenBSD: sshd_config,v 1.97 2015/08/06 14:53:21 deraadt Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
#LoginGraceTime 2m
#PermitRootLogin no
+#PermitRootLogin prohibit-password
PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
-# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $
+# $OpenBSD: sshd_config,v 1.95 2015/04/27 21:42:48 djm Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# Authentication:
#LoginGraceTime 2m
-#PermitRootLogin yes
+#PermitRootLogin no
PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
-ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
-#UseDNS yes
-#PidFile /var/run/sshd.pid
+#UseDNS no
+#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
-# $OpenBSD$
+# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key
-# "key type names" for X.509 certificates with RSA key
-# Note first defined is used in signature operations!
-#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1
-#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5
-
-# "key type names" for X.509 certificates with DSA key
-# Note first defined is used in signature operations!
-#X509KeyAlgorithm x509v3-sign-dss,dss-asn1
-#X509KeyAlgorithm x509v3-sign-dss,dss-raw
-
-# The intended use for the X509 client certificate. Without this option
-# no chain verification will be done. Currently accepted uses are case
-# insensitive:
-# - "sslclient", "SSL client", "SSL_client" or "client"
-# - "any", "Any Purpose", "Any_Purpose" or "AnyPurpose"
-# - "skip" or ""(empty): don`t check purpose.
-#AllowedCertPurpose sslclient
-
-# Specifies whether self-issued(self-signed) X.509 certificate can be
-# allowed only by entry in AutorizedKeysFile that contain matching
-# public key or certificate blob.
-#KeyAllowSelfIssued no
-
-# Specifies whether CRL must present in store for all certificates in
-# certificate chain with atribute "cRLDistributionPoints"
-#MandatoryCRL no
-
-# A file with multiple certificates of certificate signers
-# in PEM format concatenated together.
-#CACertificateFile /etc/ssh/ca/ca-bundle.crt
-
-# A directory with certificates of certificate signers.
-# The certificates should have name of the form: [HASH].[NUMBER]
-# or have symbolic links to them of this form.
-#CACertificatePath /etc/ssh/ca/crt
-
-# A file with multiple CRL of certificate signers
-# in PEM format concatenated together.
-#CARevocationFile /etc/ssh/ca/ca-bundle.crl
-
-# A directory with CRL of certificate signers.
-# The CRL should have name of the form: [HASH].r[NUMBER]
-# or have symbolic links to them of this form.
-#CARevocationPath /etc/ssh/ca/crl
-
-# LDAP protocol version.
-# Example:
-# CAldapVersion 2
-
-# Note because of OpenSSH options parser limitation
-# use %3D instead of = !
-# LDAP initialization may require URL to be escaped, i.e.
-# use %2C instead of ,(comma). Escaped URL don't depend from
-# LDAP initialization method.
-# Example:
-# CAldapURL ldap://localhost:389/dc%3Dexample%2Cdc%3Dcom
-
-# SSH can use "Online Certificate Status Protocol"(OCSP)
-# to validate certificate. Set VAType to
-# - none : do not use OCSP to validate certificates;
-# - ocspcert: validate only certificates that specify `OCSP
-# Service Locator' URL;
-# - ocspspec: use specified in the configuration 'OCSP Responder'
-# to validate all certificates.
-#VAType none
-
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# no default banner path
#Banner none
+# here are the new patched ldap related tokens
+# entries in your LDAP must have posixAccount & ldapPublicKey objectclass
+#UseLPK yes
+#LpkLdapConf /etc/ldap.conf
+#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/
+#LpkUserDN ou=users,dc=phear,dc=org
+#LpkGroupDN ou=groups,dc=phear,dc=org
+#LpkBindDN cn=Manager,dc=phear,dc=org
+#LpkBindPw secret
+#LpkServerGroup mail
+#LpkFilter (hostAccess=master.phear.org)
+#LpkForceTLS no
+#LpkSearchTimelimit 3
+#LpkBindTimelimit 3
+#LpkPubKeyAttr sshPublicKey
+
# override default of no subsystems
Subsystem sftp /usr/lib64/misc/sftp-server
# the following are HPN related configuration options
# tcp receive buffer polling. disable in non autotuning kernels
#TcpRcvBufPoll yes
-
+
# disable hpn performance boosts
#HPNDisabled no
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
# "key type names" for X.509 certificates with RSA key
# Note first defined is used in signature operations!
#GSSAPICleanupCredentials yes
#GSSAPIStrictAcceptorCheck yes
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
+#PermitTTY yes
PrintMotd no
PrintLastLog no
#TCPKeepAlive yes
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
+# PermitTTY no
# ForceCommand cvs server
# Allow client to pass locale environment variables #367017
# "key type names" for X.509 certificates with RSA key
# Note first defined is used in signature operations!
-#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5
#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1
+#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5
# "key type names" for X.509 certificates with DSA key
# Note first defined is used in signature operations!
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
+# Ciphers and keying
+#RekeyLimit default none
+
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO
-#LogLevel DEBUG
# Authentication:
# but this is overridden so installations will only check .ssh/authorized_keys
#AuthorizedKeysFile .ssh/authorized_keys
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
PrintLastLog no
#TCPKeepAlive yes
#UseLogin no
-#UsePrivilegeSeparation yes
+UsePrivilegeSeparation sandbox # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
-#MaxStartups 10
+#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
+#VersionAddendum none
# no default banner path
#Banner none
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
# override default of no subsystems
Subsystem sftp /usr/lib64/misc/sftp-server
# tcp receive buffer polling. disable in non autotuning kernels
#TcpRcvBufPoll yes
-# allow the use of the none cipher
-#NoneEnabled no
-
-# disable hpn performance boosts.
+# disable hpn performance boosts
#HPNDisabled no
# buffer size for hpn to non-hpn connections
#HPNBufferSize 2048
+# allow the use of the none cipher
+#NoneEnabled no
+
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server
+
+# Allow client to pass locale environment variables #367017
+AcceptEnv LANG LC_*
--- /dev/null
+# $OpenBSD$
+
+# This is the sshd server system-wide configuration file. See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented. Uncommented options override the
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+# The default requires explicit activation of protocol 1
+#Protocol 2
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+
+# "key type names" for X.509 certificates with RSA key
+# Note first defined is used in signature operations!
+#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5
+#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1
+
+# "key type names" for X.509 certificates with DSA key
+# Note first defined is used in signature operations!
+#X509KeyAlgorithm x509v3-sign-dss,dss-asn1
+#X509KeyAlgorithm x509v3-sign-dss,dss-raw
+
+# The intended use for the X509 client certificate. Without this option
+# no chain verification will be done. Currently accepted uses are case
+# insensitive:
+# - "sslclient", "SSL client", "SSL_client" or "client"
+# - "any", "Any Purpose", "Any_Purpose" or "AnyPurpose"
+# - "skip" or ""(empty): don`t check purpose.
+#AllowedCertPurpose sslclient
+
+# Specifies whether self-issued(self-signed) X.509 certificate can be
+# allowed only by entry in AutorizedKeysFile that contain matching
+# public key or certificate blob.
+#KeyAllowSelfIssued no
+
+# Specifies whether CRL must present in store for all certificates in
+# certificate chain with atribute "cRLDistributionPoints"
+#MandatoryCRL no
+
+# A file with multiple certificates of certificate signers
+# in PEM format concatenated together.
+#CACertificateFile /etc/ssh/ca/ca-bundle.crt
+
+# A directory with certificates of certificate signers.
+# The certificates should have name of the form: [HASH].[NUMBER]
+# or have symbolic links to them of this form.
+#CACertificatePath /etc/ssh/ca/crt
+
+# A file with multiple CRL of certificate signers
+# in PEM format concatenated together.
+#CARevocationFile /etc/ssh/ca/ca-bundle.crl
+
+# A directory with CRL of certificate signers.
+# The CRL should have name of the form: [HASH].r[NUMBER]
+# or have symbolic links to them of this form.
+#CARevocationPath /etc/ssh/ca/crl
+
+# LDAP protocol version.
+# Example:
+# CAldapVersion 2
+
+# Note because of OpenSSH options parser limitation
+# use %3D instead of = !
+# LDAP initialization may require URL to be escaped, i.e.
+# use %2C instead of ,(comma). Escaped URL don't depend from
+# LDAP initialization method.
+# Example:
+# CAldapURL ldap://localhost:389/dc%3Dexample%2Cdc%3Dcom
+
+# SSH can use "Online Certificate Status Protocol"(OCSP)
+# to validate certificate. Set VAType to
+# - none : do not use OCSP to validate certificates;
+# - ocspcert: validate only certificates that specify `OCSP
+# Service Locator' URL;
+# - ocspspec: use specified in the configuration 'OCSP Responder'
+# to validate all certificates.
+#VAType none
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+#LogLevel INFO
+#LogLevel DEBUG
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin yes
+PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+#AuthorizedKeysFile .ssh/authorized_keys
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+PasswordAuthentication no
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+ChallengeResponseAuthentication no
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+#GSSAPIStrictAcceptorCheck yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication. Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+PrintMotd no
+PrintLastLog no
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10
+#PermitTunnel no
+#ChrootDirectory none
+
+# no default banner path
+#Banner none
+
+# Allow client to pass locale environment variables
+AcceptEnv LANG LC_*
+
+# override default of no subsystems
+Subsystem sftp /usr/lib64/misc/sftp-server
+
+# the following are HPN related configuration options
+# tcp receive buffer polling. disable in non autotuning kernels
+#TcpRcvBufPoll yes
+
+# allow the use of the none cipher
+#NoneEnabled no
+
+# disable hpn performance boosts.
+#HPNDisabled no
+
+# buffer size for hpn to non-hpn connections
+#HPNBufferSize 2048
+
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+# X11Forwarding no
+# AllowTcpForwarding no
+# ForceCommand cvs server
--- /dev/null
+# $OpenBSD: sshd_config,v 1.98 2016/02/17 05:29:04 djm Exp $
+
+# This is the sshd server system-wide configuration file. See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented. Uncommented options override the
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+# The default requires explicit activation of protocol 1
+#Protocol 2
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin prohibit-password
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+#AuthorizedKeysFile .ssh/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+PasswordAuthentication no
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication. Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+PrintMotd no
+PrintLastLog no
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation sandbox
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS no
+#PidFile /run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# here are the new patched ldap related tokens
+# entries in your LDAP must have posixAccount & ldapPublicKey objectclass
+#UseLPK yes
+#LpkLdapConf /etc/ldap.conf
+#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/
+#LpkUserDN ou=users,dc=phear,dc=org
+#LpkGroupDN ou=groups,dc=phear,dc=org
+#LpkBindDN cn=Manager,dc=phear,dc=org
+#LpkBindPw secret
+#LpkServerGroup mail
+#LpkFilter (hostAccess=master.phear.org)
+#LpkForceTLS no
+#LpkSearchTimelimit 3
+#LpkBindTimelimit 3
+#LpkPubKeyAttr sshPublicKey
+
+# override default of no subsystems
+Subsystem sftp /usr/lib64/misc/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+# X11Forwarding no
+# AllowTcpForwarding no
+# PermitTTY no
+# ForceCommand cvs server
+
+# Allow client to pass locale environment variables #367017
+AcceptEnv LANG LC_*
--- /dev/null
+# $OpenBSD: sshd_config,v 1.98 2016/02/17 05:29:04 djm Exp $
+
+# This is the sshd server system-wide configuration file. See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented. Uncommented options override the
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+# The default requires explicit activation of protocol 1
+#Protocol 2
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin no
+#PermitRootLogin prohibit-password
+PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+#AuthorizedKeysFile .ssh/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+PasswordAuthentication no
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication. Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+PrintMotd no
+PrintLastLog no
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation sandbox
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS no
+#PidFile /run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# here are the new patched ldap related tokens
+# entries in your LDAP must have posixAccount & ldapPublicKey objectclass
+#UseLPK yes
+#LpkLdapConf /etc/ldap.conf
+#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/
+#LpkUserDN ou=users,dc=phear,dc=org
+#LpkGroupDN ou=groups,dc=phear,dc=org
+#LpkBindDN cn=Manager,dc=phear,dc=org
+#LpkBindPw secret
+#LpkServerGroup mail
+#LpkFilter (hostAccess=master.phear.org)
+#LpkForceTLS no
+#LpkSearchTimelimit 3
+#LpkBindTimelimit 3
+#LpkPubKeyAttr sshPublicKey
+
+# override default of no subsystems
+Subsystem sftp /usr/lib64/misc/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+# X11Forwarding no
+# AllowTcpForwarding no
+# PermitTTY no
+# ForceCommand cvs server
+
+# Allow client to pass locale environment variables #367017
+AcceptEnv LANG LC_*
-# $OpenBSD: ssh_config,v 1.28 2013/09/16 11:35:43 sthen Exp $
+# $OpenBSD: ssh_config,v 1.30 2016/02/20 23:06:23 sobrado Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
+# IdentityFile ~/.ssh/id_ecdsa
+# IdentityFile ~/.ssh/id_ed25519
# Port 22
-# Protocol 2,1
+# Protocol 2
# Cipher 3des
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160
projects / config / helga / etc.git / commitdiff