maybe chmod 0660 './config-archive/etc/courier/authlib/authdaemonrc'
maybe chmod 0660 './config-archive/etc/courier/authlib/authdaemonrc.dist'
maybe chmod 0660 './config-archive/etc/courier/authlib/authdaemonrc.dist.dist'
+maybe chmod 0755 './config-archive/etc/cups'
+maybe chmod 0640 './config-archive/etc/cups/cupsd.conf'
+maybe chmod 0640 './config-archive/etc/cups/cupsd.conf.default'
+maybe chmod 0640 './config-archive/etc/cups/cupsd.conf.default.dist'
+maybe chmod 0640 './config-archive/etc/cups/cupsd.conf.dist'
+maybe chmod 0640 './config-archive/etc/cups/snmp.conf'
+maybe chmod 0640 './config-archive/etc/cups/snmp.conf.dist'
maybe chmod 0755 './config-archive/etc/eselect'
maybe chmod 0755 './config-archive/etc/eselect/postgresql'
maybe chmod 0755 './config-archive/etc/eselect/postgresql/slots'
maybe chmod 0755 './config-archive/etc/php/apache2-php5.3/ext'
maybe chmod 0644 './config-archive/etc/php/apache2-php5.3/ext/apc.ini'
maybe chmod 0644 './config-archive/etc/php/apache2-php5.3/ext/apc.ini.dist'
+maybe chmod 0644 './config-archive/etc/php/apache2-php5.3/php.ini'
+maybe chmod 0644 './config-archive/etc/php/apache2-php5.3/php.ini.dist'
maybe chmod 0755 './config-archive/etc/php/cgi-php5.3'
maybe chmod 0755 './config-archive/etc/php/cgi-php5.3/ext'
maybe chmod 0644 './config-archive/etc/php/cgi-php5.3/ext/apc.ini'
maybe chmod 0644 './config-archive/etc/php/cgi-php5.3/ext/apc.ini.dist'
+maybe chmod 0644 './config-archive/etc/php/cgi-php5.3/php.ini'
+maybe chmod 0644 './config-archive/etc/php/cgi-php5.3/php.ini.dist'
maybe chmod 0755 './config-archive/etc/php/cli-php5.3'
maybe chmod 0755 './config-archive/etc/php/cli-php5.3/ext'
maybe chmod 0644 './config-archive/etc/php/cli-php5.3/ext/apc.ini'
maybe chmod 0644 './config-archive/etc/php/cli-php5.3/ext/apc.ini.dist'
+maybe chmod 0644 './config-archive/etc/php/cli-php5.3/php.ini'
+maybe chmod 0644 './config-archive/etc/php/cli-php5.3/php.ini.dist'
+maybe chmod 0755 './config-archive/etc/php/embed-php5.3'
+maybe chmod 0644 './config-archive/etc/php/embed-php5.3/php.ini'
+maybe chmod 0644 './config-archive/etc/php/embed-php5.3/php.ini.dist'
maybe chmod 0755 './config-archive/etc/php/fpm-php5.3'
maybe chmod 0755 './config-archive/etc/php/fpm-php5.3/ext'
maybe chmod 0644 './config-archive/etc/php/fpm-php5.3/ext/apc.ini'
maybe chmod 0644 './config-archive/etc/php/fpm-php5.3/ext/apc.ini.dist'
+maybe chmod 0644 './config-archive/etc/php/fpm-php5.3/php.ini'
+maybe chmod 0644 './config-archive/etc/php/fpm-php5.3/php.ini.dist'
maybe chmod 0755 './config-archive/etc/portage'
maybe chmod 0755 './config-archive/etc/portage/savedconfig'
maybe chmod 0755 './config-archive/etc/portage/savedconfig/sys-apps'
maybe chmod 0644 './csh.env'
maybe chgrp lp './cups'
maybe chmod 0755 './cups'
-maybe chgrp lp './cups/._cfg0000_cupsd.conf'
-maybe chmod 0640 './cups/._cfg0000_cupsd.conf'
-maybe chgrp lp './cups/._cfg0000_cupsd.conf.default'
-maybe chmod 0640 './cups/._cfg0000_cupsd.conf.default'
-maybe chgrp lp './cups/._cfg0000_snmp.conf'
-maybe chmod 0640 './cups/._cfg0000_snmp.conf'
maybe chmod 0644 './cups/client.conf'
maybe chgrp lp './cups/cupsd.conf'
maybe chmod 0640 './cups/cupsd.conf'
maybe chmod 0600 './passwd-'
maybe chmod 0755 './php'
maybe chmod 0755 './php/apache2-php5.3'
-maybe chmod 0644 './php/apache2-php5.3/._cfg0000_php.ini'
maybe chmod 0755 './php/apache2-php5.3/ext'
maybe chmod 0755 './php/apache2-php5.3/ext-active'
maybe chmod 0644 './php/apache2-php5.3/ext/apc.ini'
maybe chmod 0644 './php/apache2-php5.3/ext/uuid.ini'
maybe chmod 0644 './php/apache2-php5.3/php.ini'
maybe chmod 0755 './php/cgi-php5.3'
-maybe chmod 0644 './php/cgi-php5.3/._cfg0000_php.ini'
maybe chmod 0755 './php/cgi-php5.3/ext'
maybe chmod 0755 './php/cgi-php5.3/ext-active'
maybe chmod 0644 './php/cgi-php5.3/ext/apc.ini'
maybe chmod 0644 './php/cgi-php5.3/ext/uuid.ini'
maybe chmod 0644 './php/cgi-php5.3/php.ini'
maybe chmod 0755 './php/cli-php5.3'
-maybe chmod 0644 './php/cli-php5.3/._cfg0000_php.ini'
maybe chmod 0755 './php/cli-php5.3/ext'
maybe chmod 0755 './php/cli-php5.3/ext-active'
maybe chmod 0644 './php/cli-php5.3/ext/apc.ini'
maybe chmod 0644 './php/cli-php5.3/ext/uuid.ini'
maybe chmod 0644 './php/cli-php5.3/php.ini'
maybe chmod 0755 './php/embed-php5.3'
-maybe chmod 0644 './php/embed-php5.3/._cfg0000_php.ini'
maybe chmod 0755 './php/embed-php5.3/ext'
maybe chmod 0755 './php/embed-php5.3/ext-active'
maybe chmod 0644 './php/embed-php5.3/php.ini'
maybe chmod 0755 './php/fpm-php5.3'
-maybe chmod 0644 './php/fpm-php5.3/._cfg0000_php.ini'
maybe chmod 0755 './php/fpm-php5.3/ext'
maybe chmod 0755 './php/fpm-php5.3/ext-active'
maybe chmod 0644 './php/fpm-php5.3/ext/apc.ini'
--- /dev/null
+#
+# "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $"
+#
+# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
+# complete description of this file.
+#
+
+# Log general information in error_log - change "warn" to "debug"
+# for troubleshooting...
+LogLevel warn
+
+# Administrator user group...
+SystemGroup lpadmin
+
+
+# Only listen for connections from the local machine.
+Listen localhost:631
+Listen /var/run/cups/cups.sock
+
+# Show shared printers on the local network.
+Browsing On
+BrowseOrder allow,deny
+BrowseAllow all
+BrowseLocalProtocols CUPS
+
+# Default authentication type, when authentication is required...
+DefaultAuthType Basic
+
+# Restrict access to the server...
+<Location />
+ Order allow,deny
+</Location>
+
+# Restrict access to the admin pages...
+<Location /admin>
+ Order allow,deny
+</Location>
+
+# Restrict access to configuration files...
+<Location /admin/conf>
+ AuthType Default
+ Require user @SYSTEM
+ Order allow,deny
+</Location>
+
+# Set the default printer/job policies...
+<Policy default>
+ # Job-related operations must be done by the owner or an administrator...
+ <Limit Create-Job Print-Job Print-URI Validate-Job>
+ Order deny,allow
+ </Limit>
+
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All administration operations require an administrator to authenticate...
+ <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All printer operations require a printer operator to authenticate...
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # Only the owner or an administrator can cancel or authenticate a job...
+ <Limit Cancel-Job CUPS-Authenticate-Job>
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ <Limit All>
+ Order deny,allow
+ </Limit>
+</Policy>
+
+# Set the authenticated printer/job policies...
+<Policy authenticated>
+ # Job-related operations must be done by the owner or an administrator...
+ <Limit Create-Job Print-Job Print-URI Validate-Job>
+ AuthType Default
+ Order deny,allow
+ </Limit>
+
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ AuthType Default
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All administration operations require an administrator to authenticate...
+ <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All printer operations require a printer operator to authenticate...
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # Only the owner or an administrator can cancel or authenticate a job...
+ <Limit Cancel-Job CUPS-Authenticate-Job>
+ AuthType Default
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ <Limit All>
+ Order deny,allow
+ </Limit>
+</Policy>
+
+#
+# End of "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $".
+#
--- /dev/null
+#
+# "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $"
+#
+# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
+# complete description of this file.
+#
+
+# Log general information in error_log - change "warn" to "debug"
+# for troubleshooting...
+LogLevel warn
+
+# Administrator user group...
+SystemGroup lpadmin
+
+
+# Only listen for connections from the local machine.
+Listen localhost:631
+Listen /var/run/cups/cups.sock
+
+# Show shared printers on the local network.
+Browsing On
+BrowseOrder allow,deny
+BrowseAllow all
+BrowseLocalProtocols CUPS
+
+# Default authentication type, when authentication is required...
+DefaultAuthType Basic
+
+# Restrict access to the server...
+<Location />
+ Order allow,deny
+</Location>
+
+# Restrict access to the admin pages...
+<Location /admin>
+ Order allow,deny
+</Location>
+
+# Restrict access to configuration files...
+<Location /admin/conf>
+ AuthType Default
+ Require user @SYSTEM
+ Order allow,deny
+</Location>
+
+# Set the default printer/job policies...
+<Policy default>
+ # Job-related operations must be done by the owner or an administrator...
+ <Limit Create-Job Print-Job Print-URI Validate-Job>
+ Order deny,allow
+ </Limit>
+
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All administration operations require an administrator to authenticate...
+ <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All printer operations require a printer operator to authenticate...
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # Only the owner or an administrator can cancel or authenticate a job...
+ <Limit Cancel-Job CUPS-Authenticate-Job>
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ <Limit All>
+ Order deny,allow
+ </Limit>
+</Policy>
+
+# Set the authenticated printer/job policies...
+<Policy authenticated>
+ # Job-related operations must be done by the owner or an administrator...
+ <Limit Create-Job Print-Job Print-URI Validate-Job>
+ AuthType Default
+ Order deny,allow
+ </Limit>
+
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ AuthType Default
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All administration operations require an administrator to authenticate...
+ <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All printer operations require a printer operator to authenticate...
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # Only the owner or an administrator can cancel or authenticate a job...
+ <Limit Cancel-Job CUPS-Authenticate-Job>
+ AuthType Default
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ <Limit All>
+ Order deny,allow
+ </Limit>
+</Policy>
+
+#
+# End of "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $".
+#
--- /dev/null
+#
+# "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $"
+#
+# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
+# complete description of this file.
+#
+
+# Log general information in error_log - change "warn" to "debug"
+# for troubleshooting...
+LogLevel warn
+
+# Administrator user group...
+SystemGroup lpadmin
+
+
+# Only listen for connections from the local machine.
+Listen localhost:631
+Listen /var/run/cups/cups.sock
+
+# Show shared printers on the local network.
+# We switch this off by default in Gentoo, to avoid an unnecessary open port.
+Browsing Off
+BrowseOrder allow,deny
+BrowseAllow all
+BrowseLocalProtocols CUPS
+
+# Default authentication type, when authentication is required...
+DefaultAuthType Basic
+
+# Web interface setting...
+WebInterface Yes
+
+# Restrict access to the server...
+<Location />
+ Order allow,deny
+</Location>
+
+# Restrict access to the admin pages...
+<Location /admin>
+ Order allow,deny
+</Location>
+
+# Restrict access to configuration files...
+<Location /admin/conf>
+ AuthType Default
+ Require user @SYSTEM
+ Order allow,deny
+</Location>
+
+# Set the default printer/job policies...
+<Policy default>
+ # Job/subscription privacy...
+ JobPrivateAccess default
+ JobPrivateValues default
+ SubscriptionPrivateAccess default
+ SubscriptionPrivateValues default
+
+ # Job-related operations must be done by the owner or an administrator...
+ <Limit Create-Job Print-Job Print-URI Validate-Job>
+ Order deny,allow
+ </Limit>
+
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All administration operations require an administrator to authenticate...
+ <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All printer operations require a printer operator to authenticate...
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # Only the owner or an administrator can cancel or authenticate a job...
+ <Limit Cancel-Job CUPS-Authenticate-Job>
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ <Limit All>
+ Order deny,allow
+ </Limit>
+</Policy>
+
+# Set the authenticated printer/job policies...
+<Policy authenticated>
+ # Job/subscription privacy...
+ JobPrivateAccess default
+ JobPrivateValues default
+ SubscriptionPrivateAccess default
+ SubscriptionPrivateValues default
+
+ # Job-related operations must be done by the owner or an administrator...
+ <Limit Create-Job Print-Job Print-URI Validate-Job>
+ AuthType Default
+ Order deny,allow
+ </Limit>
+
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
+ AuthType Default
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All administration operations require an administrator to authenticate...
+ <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All printer operations require a printer operator to authenticate...
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # Only the owner or an administrator can cancel or authenticate a job...
+ <Limit Cancel-Job CUPS-Authenticate-Job>
+ AuthType Default
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ <Limit All>
+ Order deny,allow
+ </Limit>
+</Policy>
+
+#
+# End of "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $".
+#
--- /dev/null
+#
+# "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $"
+#
+# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
+# complete description of this file.
+#
+
+# Log general information in error_log - change "warn" to "debug"
+# for troubleshooting...
+LogLevel warn
+
+# Administrator user group...
+SystemGroup lpadmin
+
+
+# Only listen for connections from the local machine.
+Listen localhost:631
+Listen /var/run/cups/cups.sock
+
+# Show shared printers on the local network.
+# We switch this off by default in Gentoo, to avoid an unnecessary open port.
+Browsing Off
+BrowseOrder allow,deny
+BrowseAllow all
+BrowseLocalProtocols CUPS
+
+# Default authentication type, when authentication is required...
+DefaultAuthType Basic
+
+# Web interface setting...
+WebInterface Yes
+
+# Restrict access to the server...
+<Location />
+ Order allow,deny
+</Location>
+
+# Restrict access to the admin pages...
+<Location /admin>
+ Order allow,deny
+</Location>
+
+# Restrict access to configuration files...
+<Location /admin/conf>
+ AuthType Default
+ Require user @SYSTEM
+ Order allow,deny
+</Location>
+
+# Set the default printer/job policies...
+<Policy default>
+ # Job/subscription privacy...
+ JobPrivateAccess default
+ JobPrivateValues default
+ SubscriptionPrivateAccess default
+ SubscriptionPrivateValues default
+
+ # Job-related operations must be done by the owner or an administrator...
+ <Limit Create-Job Print-Job Print-URI Validate-Job>
+ Order deny,allow
+ </Limit>
+
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All administration operations require an administrator to authenticate...
+ <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All printer operations require a printer operator to authenticate...
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # Only the owner or an administrator can cancel or authenticate a job...
+ <Limit Cancel-Job CUPS-Authenticate-Job>
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ <Limit All>
+ Order deny,allow
+ </Limit>
+</Policy>
+
+# Set the authenticated printer/job policies...
+<Policy authenticated>
+ # Job/subscription privacy...
+ JobPrivateAccess default
+ JobPrivateValues default
+ SubscriptionPrivateAccess default
+ SubscriptionPrivateValues default
+
+ # Job-related operations must be done by the owner or an administrator...
+ <Limit Create-Job Print-Job Print-URI Validate-Job>
+ AuthType Default
+ Order deny,allow
+ </Limit>
+
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
+ AuthType Default
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All administration operations require an administrator to authenticate...
+ <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All printer operations require a printer operator to authenticate...
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # Only the owner or an administrator can cancel or authenticate a job...
+ <Limit Cancel-Job CUPS-Authenticate-Job>
+ AuthType Default
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ <Limit All>
+ Order deny,allow
+ </Limit>
+</Policy>
+
+#
+# End of "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $".
+#
--- /dev/null
+#
+# "$Id$"
+#
+# Sample SNMP configuration file for CUPS. See "man cups-snmp.conf" for a
+# complete description of this file.
+#
+
+Address @LOCAL
+Community public
+
+#
+# End of "$Id$".
+#
--- /dev/null
+#
+# "$Id: snmp.conf.in 9045 2010-03-24 07:48:42Z mike $"
+#
+# Sample SNMP configuration file for CUPS. See "man cups-snmp.conf" for a
+# complete description of this file.
+#
+
+Address @LOCAL
+Community public
+
+#
+# End of "$Id: snmp.conf.in 9045 2010-03-24 07:48:42Z mike $".
+#
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and Lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it's
+; much more verbose when it comes to errors. We recommending using the
+; development version only in development environments as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; allow_call_time_pass_reference
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: Off
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; magic_quotes_gpc
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; register_long_arrays
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.bug_compat_42
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.bug_compat_warn
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It's been
+; recommended for several years that you not use the short tag "short cut" and
+; instead to use the full <?php and ?> tag combination. With the wide spread use
+; of XML and use of these tags by other languages, the server can become easily
+; confused and end up parsing the wrong code in the wrong context. But because
+; this short cut has been a feature for such a long time, it's currently still
+; supported for backwards compatibility, but we recommend you don't use them.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+; http://php.net/y2k-compliance
+y2k_compliance = On
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; This directive allows you to enable and disable warnings which PHP will issue
+; if you pass a value by reference at function call time. Passing values by
+; reference at function call time is a deprecated feature which will be removed
+; from PHP at some point in the near future. The acceptable method for passing a
+; value by reference to a function is by declaring the reference in the functions
+; definition, not at call time. This directive does not disable this feature, it
+; only determines whether PHP will warn you about it or not. These warnings
+; should enabled in development environments only.
+; Default Value: On (Suppress warnings)
+; Development Value: Off (Issue warnings)
+; Production Value: Off (Issue warnings)
+; http://php.net/allow-call-time-pass-reference
+allow_call_time_pass_reference = Off
+
+; Safe Mode
+; http://php.net/safe-mode
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+; http://php.net/safe-mode-gid
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+; http://php.net/safe-mode-include-dir
+safe_mode_include_dir =
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+; http://php.net/safe-mode-exec-dir
+safe_mode_exec_dir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes. In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here. By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+; Note: If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+; http://php.net/safe-mode-allowed-env-vars
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv(). These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+; http://php.net/safe-mode-protected-env-vars
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.bg = #FFFFFF
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it's automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
+; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+; http://php.net/error-reporting
+error_reporting = E_ALL | E_STRICT
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; It's recommended that errors be logged on production servers rather than
+; having the errors sent to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. But, it's strongly recommended that you
+; leave this setting off on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of inserting html
+; links to documentation related to that error. This directive controls whether
+; those HTML links appear in error messages or not. For performance and security
+; reasons, it's recommended you disable this on production servers.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: Off
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set On PHP produces clickable error messages that direct
+; to a page describing the error or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on NT, not valid in Windows 95).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. If the register_globals directive is enabled, it also determines
+; what order variables are populated into the global space. G,P,C,E & S are
+; abbreviations for the following respective super globals: GET, POST, COOKIE,
+; ENV and SERVER. There is a performance penalty paid for the registration of
+; these arrays and because ENV is not as commonly used as the others, ENV is
+; is not recommended on productions servers. You can still get access to
+; the environment variables through getenv() should you need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P,C,E & S) should
+; be registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive are
+; specified in the same manner as the variables_order directive, EXCEPT one.
+; Leaving this value empty will cause PHP to use the value set in the
+; variables_order directive. It does not mean it will leave the super globals
+; array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; Whether or not to register the EGPCS variables as global variables. You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data.
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on; Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+; http://php.net/register-globals
+register_globals = Off
+
+; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
+; are registered by PHP or not. As they are deprecated, we obviously don't
+; recommend you use them. They are on by default for compatibility reasons but
+; they are not recommended on production servers.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-long-arrays
+register_long_arrays = Off
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the SERVER and ENV variables are created when they're first
+; used (Just In Time) instead of when the script starts. If these variables
+; are not used within a script, having this directive on will result in a
+; performance gain. The PHP directives register_globals, register_long_arrays,
+; and register_argc_argv must be disabled for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Maximum size of POST data that PHP will accept.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
+; escape any character sequences in GET, POST, COOKIE and ENV data which might
+; otherwise corrupt data being placed in resources such as databases before
+; making that data available to you. Because of character encoding issues and
+; non-standard SQL implementations across many databases, it's not currently
+; possible for this feature to be 100% accurate. PHP's default behavior is to
+; enable the feature. We strongly recommend you use the escaping mechanisms
+; designed specifically for the database your using instead of relying on this
+; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
+; scheduled for removal in PHP 6.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/magic-quotes-gpc
+magic_quotes_gpc = Off
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+; http://php.net/magic-quotes-runtime
+magic_quotes_runtime = Off
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+; http://php.net/magic-quotes-sybase
+magic_quotes_sybase = Off
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to empty.
+; http://php.net/default-charset
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = On
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env = ;
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1;
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
+; is supported by Apache. When this option is set to 1 PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
+;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mssql.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+;extension=php_zip.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+;iconv.input_encoding = ISO-8859-1
+;iconv.internal_encoding = ISO-8859-1
+;iconv.output_encoding = ISO-8859-1
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
+; runtime, you can define these variables by calling define_syslog_variables().
+; http://php.net/define-syslog-variables
+define_syslog_variables = Off
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail(), even in safe mode.
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if you
+; or your OS have problems with lots of files in one directory, and is
+; a more efficient layout for servers that handle lots of sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combatting
+; session hijacking when not specifying and managing your own session id. It is
+; not the end all be all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 | xargs rm
+
+; PHP 4.2 and less have an undocumented feature/bug that allows you to
+; to initialize a session variable in the global scope, even when register_globals
+; is disabled. PHP 4.3 and later will warn you, if this feature is used.
+; You can disable the feature and the warning separately. At this time,
+; the warning is only displayed, if bug_compat_42 is enabled. This feature
+; introduces some serious security problems if not handled correctly. It's
+; recommended that you do not use this feature on production servers. But you
+; should enable this on development servers and enable the warning as well. If you
+; do not enable the feature on development servers, you won't be warned when it's
+; used and debugging errors caused by this can be difficult to track down.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-42
+session.bug_compat_42 = On
+
+; This setting controls whether or not you are warned by PHP when initializing a
+; session value into the global space. session.bug_compat_42 must be enabled before
+; these warnings can be issued by PHP. See the directive above for more information.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-warn
+session.bug_compat_warn = On
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+session.entropy_length = 0
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; On systems that don't have /dev/urandom /dev/arandom can be used
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publically accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; internal/script encoding.
+; Some encoding cannot work as internal encoding.
+; (e.g. SJIS, BIG5, ISO-2022-*)
+; http://php.net/mbstring.internal-encoding
+;mbstring.internal_encoding = EUC-JP
+
+; http input encoding.
+; http://php.net/mbstring.http-input
+;mbstring.http_input = auto
+
+; http output encoding. mb_output_handler must be
+; registered as output buffer to function
+; http://php.net/mbstring.http-output
+;mbstring.http_output = SJIS
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; auto means
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none;
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+;mbstring.strict_detection = Off
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
+; Default: ""
+;mbstring.script_encoding=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[xsl]
+; Write operations from within XSLT are disabled by default.
+; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
+; Set it to 0 to allow all operations
+;xsl.security_prefs = 44
+
+; Local Variables:
+; tab-width: 4
+; End:
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and Lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it's
+; much more verbose when it comes to errors. We recommending using the
+; development version only in development environments as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; allow_call_time_pass_reference
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: Off
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; magic_quotes_gpc
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; register_long_arrays
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.bug_compat_42
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.bug_compat_warn
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It's been
+; recommended for several years that you not use the short tag "short cut" and
+; instead to use the full <?php and ?> tag combination. With the wide spread use
+; of XML and use of these tags by other languages, the server can become easily
+; confused and end up parsing the wrong code in the wrong context. But because
+; this short cut has been a feature for such a long time, it's currently still
+; supported for backwards compatibility, but we recommend you don't use them.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+; http://php.net/y2k-compliance
+y2k_compliance = On
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; This directive allows you to enable and disable warnings which PHP will issue
+; if you pass a value by reference at function call time. Passing values by
+; reference at function call time is a deprecated feature which will be removed
+; from PHP at some point in the near future. The acceptable method for passing a
+; value by reference to a function is by declaring the reference in the functions
+; definition, not at call time. This directive does not disable this feature, it
+; only determines whether PHP will warn you about it or not. These warnings
+; should enabled in development environments only.
+; Default Value: On (Suppress warnings)
+; Development Value: Off (Issue warnings)
+; Production Value: Off (Issue warnings)
+; http://php.net/allow-call-time-pass-reference
+allow_call_time_pass_reference = Off
+
+; Safe Mode
+; http://php.net/safe-mode
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+; http://php.net/safe-mode-gid
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+; http://php.net/safe-mode-include-dir
+safe_mode_include_dir =
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+; http://php.net/safe-mode-exec-dir
+safe_mode_exec_dir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes. In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here. By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+; Note: If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+; http://php.net/safe-mode-allowed-env-vars
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv(). These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+; http://php.net/safe-mode-protected-env-vars
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.bg = #FFFFFF
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it's automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
+; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+; http://php.net/error-reporting
+error_reporting = E_ALL | E_STRICT
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; It's recommended that errors be logged on production servers rather than
+; having the errors sent to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. But, it's strongly recommended that you
+; leave this setting off on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of inserting html
+; links to documentation related to that error. This directive controls whether
+; those HTML links appear in error messages or not. For performance and security
+; reasons, it's recommended you disable this on production servers.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: Off
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set On PHP produces clickable error messages that direct
+; to a page describing the error or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on NT, not valid in Windows 95).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. If the register_globals directive is enabled, it also determines
+; what order variables are populated into the global space. G,P,C,E & S are
+; abbreviations for the following respective super globals: GET, POST, COOKIE,
+; ENV and SERVER. There is a performance penalty paid for the registration of
+; these arrays and because ENV is not as commonly used as the others, ENV is
+; is not recommended on productions servers. You can still get access to
+; the environment variables through getenv() should you need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P,C,E & S) should
+; be registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive are
+; specified in the same manner as the variables_order directive, EXCEPT one.
+; Leaving this value empty will cause PHP to use the value set in the
+; variables_order directive. It does not mean it will leave the super globals
+; array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; Whether or not to register the EGPCS variables as global variables. You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data.
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on; Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+; http://php.net/register-globals
+register_globals = Off
+
+; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
+; are registered by PHP or not. As they are deprecated, we obviously don't
+; recommend you use them. They are on by default for compatibility reasons but
+; they are not recommended on production servers.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-long-arrays
+register_long_arrays = Off
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the SERVER and ENV variables are created when they're first
+; used (Just In Time) instead of when the script starts. If these variables
+; are not used within a script, having this directive on will result in a
+; performance gain. The PHP directives register_globals, register_long_arrays,
+; and register_argc_argv must be disabled for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Maximum size of POST data that PHP will accept.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
+; escape any character sequences in GET, POST, COOKIE and ENV data which might
+; otherwise corrupt data being placed in resources such as databases before
+; making that data available to you. Because of character encoding issues and
+; non-standard SQL implementations across many databases, it's not currently
+; possible for this feature to be 100% accurate. PHP's default behavior is to
+; enable the feature. We strongly recommend you use the escaping mechanisms
+; designed specifically for the database your using instead of relying on this
+; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
+; removed in PHP 5.4.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/magic-quotes-gpc
+magic_quotes_gpc = Off
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+; http://php.net/magic-quotes-runtime
+magic_quotes_runtime = Off
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+; http://php.net/magic-quotes-sybase
+magic_quotes_sybase = Off
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to empty.
+; http://php.net/default-charset
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = On
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env = ;
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1;
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
+; is supported by Apache. When this option is set to 1 PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
+;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mssql.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+;extension=php_zip.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+;iconv.input_encoding = ISO-8859-1
+;iconv.internal_encoding = ISO-8859-1
+;iconv.output_encoding = ISO-8859-1
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
+; runtime, you can define these variables by calling define_syslog_variables().
+; http://php.net/define-syslog-variables
+define_syslog_variables = Off
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail(), even in safe mode.
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if you
+; or your OS have problems with lots of files in one directory, and is
+; a more efficient layout for servers that handle lots of sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the end all be all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 | xargs rm
+
+; PHP 4.2 and less have an undocumented feature/bug that allows you to
+; to initialize a session variable in the global scope, even when register_globals
+; is disabled. PHP 4.3 and later will warn you, if this feature is used.
+; You can disable the feature and the warning separately. At this time,
+; the warning is only displayed, if bug_compat_42 is enabled. This feature
+; introduces some serious security problems if not handled correctly. It's
+; recommended that you do not use this feature on production servers. But you
+; should enable this on development servers and enable the warning as well. If you
+; do not enable the feature on development servers, you won't be warned when it's
+; used and debugging errors caused by this can be difficult to track down.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-42
+session.bug_compat_42 = On
+
+; This setting controls whether or not you are warned by PHP when initializing a
+; session value into the global space. session.bug_compat_42 must be enabled before
+; these warnings can be issued by PHP. See the directive above for more information.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-warn
+session.bug_compat_warn = On
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+session.entropy_length = 0
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; On systems that don't have /dev/urandom /dev/arandom can be used
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; internal/script encoding.
+; Some encoding cannot work as internal encoding.
+; (e.g. SJIS, BIG5, ISO-2022-*)
+; http://php.net/mbstring.internal-encoding
+;mbstring.internal_encoding = EUC-JP
+
+; http input encoding.
+; http://php.net/mbstring.http-input
+;mbstring.http_input = auto
+
+; http output encoding. mb_output_handler must be
+; registered as output buffer to function
+; http://php.net/mbstring.http-output
+;mbstring.http_output = SJIS
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; auto means
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none;
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+;mbstring.strict_detection = Off
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
+; Default: ""
+;mbstring.script_encoding=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[xsl]
+; Write operations from within XSLT are disabled by default.
+; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
+; Set it to 0 to allow all operations
+;xsl.security_prefs = 44
+
+; Local Variables:
+; tab-width: 4
+; End:
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and Lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it's
+; much more verbose when it comes to errors. We recommending using the
+; development version only in development environments as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; allow_call_time_pass_reference
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: Off
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; magic_quotes_gpc
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; register_long_arrays
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.bug_compat_42
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.bug_compat_warn
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It's been
+; recommended for several years that you not use the short tag "short cut" and
+; instead to use the full <?php and ?> tag combination. With the wide spread use
+; of XML and use of these tags by other languages, the server can become easily
+; confused and end up parsing the wrong code in the wrong context. But because
+; this short cut has been a feature for such a long time, it's currently still
+; supported for backwards compatibility, but we recommend you don't use them.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+; http://php.net/y2k-compliance
+y2k_compliance = On
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; This directive allows you to enable and disable warnings which PHP will issue
+; if you pass a value by reference at function call time. Passing values by
+; reference at function call time is a deprecated feature which will be removed
+; from PHP at some point in the near future. The acceptable method for passing a
+; value by reference to a function is by declaring the reference in the functions
+; definition, not at call time. This directive does not disable this feature, it
+; only determines whether PHP will warn you about it or not. These warnings
+; should enabled in development environments only.
+; Default Value: On (Suppress warnings)
+; Development Value: Off (Issue warnings)
+; Production Value: Off (Issue warnings)
+; http://php.net/allow-call-time-pass-reference
+allow_call_time_pass_reference = Off
+
+; Safe Mode
+; http://php.net/safe-mode
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+; http://php.net/safe-mode-gid
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+; http://php.net/safe-mode-include-dir
+safe_mode_include_dir =
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+; http://php.net/safe-mode-exec-dir
+safe_mode_exec_dir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes. In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here. By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+; Note: If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+; http://php.net/safe-mode-allowed-env-vars
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv(). These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+; http://php.net/safe-mode-protected-env-vars
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.bg = #FFFFFF
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it's automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
+; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+; http://php.net/error-reporting
+error_reporting = E_ALL | E_STRICT
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; It's recommended that errors be logged on production servers rather than
+; having the errors sent to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. But, it's strongly recommended that you
+; leave this setting off on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of inserting html
+; links to documentation related to that error. This directive controls whether
+; those HTML links appear in error messages or not. For performance and security
+; reasons, it's recommended you disable this on production servers.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: Off
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set On PHP produces clickable error messages that direct
+; to a page describing the error or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on NT, not valid in Windows 95).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. If the register_globals directive is enabled, it also determines
+; what order variables are populated into the global space. G,P,C,E & S are
+; abbreviations for the following respective super globals: GET, POST, COOKIE,
+; ENV and SERVER. There is a performance penalty paid for the registration of
+; these arrays and because ENV is not as commonly used as the others, ENV is
+; is not recommended on productions servers. You can still get access to
+; the environment variables through getenv() should you need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P,C,E & S) should
+; be registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive are
+; specified in the same manner as the variables_order directive, EXCEPT one.
+; Leaving this value empty will cause PHP to use the value set in the
+; variables_order directive. It does not mean it will leave the super globals
+; array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; Whether or not to register the EGPCS variables as global variables. You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data.
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on; Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+; http://php.net/register-globals
+register_globals = Off
+
+; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
+; are registered by PHP or not. As they are deprecated, we obviously don't
+; recommend you use them. They are on by default for compatibility reasons but
+; they are not recommended on production servers.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-long-arrays
+register_long_arrays = Off
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the SERVER and ENV variables are created when they're first
+; used (Just In Time) instead of when the script starts. If these variables
+; are not used within a script, having this directive on will result in a
+; performance gain. The PHP directives register_globals, register_long_arrays,
+; and register_argc_argv must be disabled for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Maximum size of POST data that PHP will accept.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
+; escape any character sequences in GET, POST, COOKIE and ENV data which might
+; otherwise corrupt data being placed in resources such as databases before
+; making that data available to you. Because of character encoding issues and
+; non-standard SQL implementations across many databases, it's not currently
+; possible for this feature to be 100% accurate. PHP's default behavior is to
+; enable the feature. We strongly recommend you use the escaping mechanisms
+; designed specifically for the database your using instead of relying on this
+; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
+; scheduled for removal in PHP 6.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/magic-quotes-gpc
+magic_quotes_gpc = Off
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+; http://php.net/magic-quotes-runtime
+magic_quotes_runtime = Off
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+; http://php.net/magic-quotes-sybase
+magic_quotes_sybase = Off
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to empty.
+; http://php.net/default-charset
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = On
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env = ;
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1;
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
+; is supported by Apache. When this option is set to 1 PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
+;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mssql.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+;extension=php_zip.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+;iconv.input_encoding = ISO-8859-1
+;iconv.internal_encoding = ISO-8859-1
+;iconv.output_encoding = ISO-8859-1
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
+; runtime, you can define these variables by calling define_syslog_variables().
+; http://php.net/define-syslog-variables
+define_syslog_variables = Off
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail(), even in safe mode.
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if you
+; or your OS have problems with lots of files in one directory, and is
+; a more efficient layout for servers that handle lots of sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combatting
+; session hijacking when not specifying and managing your own session id. It is
+; not the end all be all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 | xargs rm
+
+; PHP 4.2 and less have an undocumented feature/bug that allows you to
+; to initialize a session variable in the global scope, even when register_globals
+; is disabled. PHP 4.3 and later will warn you, if this feature is used.
+; You can disable the feature and the warning separately. At this time,
+; the warning is only displayed, if bug_compat_42 is enabled. This feature
+; introduces some serious security problems if not handled correctly. It's
+; recommended that you do not use this feature on production servers. But you
+; should enable this on development servers and enable the warning as well. If you
+; do not enable the feature on development servers, you won't be warned when it's
+; used and debugging errors caused by this can be difficult to track down.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-42
+session.bug_compat_42 = On
+
+; This setting controls whether or not you are warned by PHP when initializing a
+; session value into the global space. session.bug_compat_42 must be enabled before
+; these warnings can be issued by PHP. See the directive above for more information.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-warn
+session.bug_compat_warn = On
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+session.entropy_length = 0
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; On systems that don't have /dev/urandom /dev/arandom can be used
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publically accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; internal/script encoding.
+; Some encoding cannot work as internal encoding.
+; (e.g. SJIS, BIG5, ISO-2022-*)
+; http://php.net/mbstring.internal-encoding
+;mbstring.internal_encoding = EUC-JP
+
+; http input encoding.
+; http://php.net/mbstring.http-input
+;mbstring.http_input = auto
+
+; http output encoding. mb_output_handler must be
+; registered as output buffer to function
+; http://php.net/mbstring.http-output
+;mbstring.http_output = SJIS
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; auto means
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none;
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+;mbstring.strict_detection = Off
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
+; Default: ""
+;mbstring.script_encoding=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[xsl]
+; Write operations from within XSLT are disabled by default.
+; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
+; Set it to 0 to allow all operations
+;xsl.security_prefs = 44
+
+; Local Variables:
+; tab-width: 4
+; End:
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and Lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it's
+; much more verbose when it comes to errors. We recommending using the
+; development version only in development environments as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; allow_call_time_pass_reference
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: Off
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; magic_quotes_gpc
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; register_long_arrays
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.bug_compat_42
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.bug_compat_warn
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It's been
+; recommended for several years that you not use the short tag "short cut" and
+; instead to use the full <?php and ?> tag combination. With the wide spread use
+; of XML and use of these tags by other languages, the server can become easily
+; confused and end up parsing the wrong code in the wrong context. But because
+; this short cut has been a feature for such a long time, it's currently still
+; supported for backwards compatibility, but we recommend you don't use them.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+; http://php.net/y2k-compliance
+y2k_compliance = On
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; This directive allows you to enable and disable warnings which PHP will issue
+; if you pass a value by reference at function call time. Passing values by
+; reference at function call time is a deprecated feature which will be removed
+; from PHP at some point in the near future. The acceptable method for passing a
+; value by reference to a function is by declaring the reference in the functions
+; definition, not at call time. This directive does not disable this feature, it
+; only determines whether PHP will warn you about it or not. These warnings
+; should enabled in development environments only.
+; Default Value: On (Suppress warnings)
+; Development Value: Off (Issue warnings)
+; Production Value: Off (Issue warnings)
+; http://php.net/allow-call-time-pass-reference
+allow_call_time_pass_reference = Off
+
+; Safe Mode
+; http://php.net/safe-mode
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+; http://php.net/safe-mode-gid
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+; http://php.net/safe-mode-include-dir
+safe_mode_include_dir =
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+; http://php.net/safe-mode-exec-dir
+safe_mode_exec_dir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes. In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here. By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+; Note: If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+; http://php.net/safe-mode-allowed-env-vars
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv(). These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+; http://php.net/safe-mode-protected-env-vars
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.bg = #FFFFFF
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it's automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
+; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+; http://php.net/error-reporting
+error_reporting = E_ALL | E_STRICT
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; It's recommended that errors be logged on production servers rather than
+; having the errors sent to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. But, it's strongly recommended that you
+; leave this setting off on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of inserting html
+; links to documentation related to that error. This directive controls whether
+; those HTML links appear in error messages or not. For performance and security
+; reasons, it's recommended you disable this on production servers.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: Off
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set On PHP produces clickable error messages that direct
+; to a page describing the error or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on NT, not valid in Windows 95).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. If the register_globals directive is enabled, it also determines
+; what order variables are populated into the global space. G,P,C,E & S are
+; abbreviations for the following respective super globals: GET, POST, COOKIE,
+; ENV and SERVER. There is a performance penalty paid for the registration of
+; these arrays and because ENV is not as commonly used as the others, ENV is
+; is not recommended on productions servers. You can still get access to
+; the environment variables through getenv() should you need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P,C,E & S) should
+; be registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive are
+; specified in the same manner as the variables_order directive, EXCEPT one.
+; Leaving this value empty will cause PHP to use the value set in the
+; variables_order directive. It does not mean it will leave the super globals
+; array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; Whether or not to register the EGPCS variables as global variables. You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data.
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on; Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+; http://php.net/register-globals
+register_globals = Off
+
+; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
+; are registered by PHP or not. As they are deprecated, we obviously don't
+; recommend you use them. They are on by default for compatibility reasons but
+; they are not recommended on production servers.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-long-arrays
+register_long_arrays = Off
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the SERVER and ENV variables are created when they're first
+; used (Just In Time) instead of when the script starts. If these variables
+; are not used within a script, having this directive on will result in a
+; performance gain. The PHP directives register_globals, register_long_arrays,
+; and register_argc_argv must be disabled for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Maximum size of POST data that PHP will accept.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
+; escape any character sequences in GET, POST, COOKIE and ENV data which might
+; otherwise corrupt data being placed in resources such as databases before
+; making that data available to you. Because of character encoding issues and
+; non-standard SQL implementations across many databases, it's not currently
+; possible for this feature to be 100% accurate. PHP's default behavior is to
+; enable the feature. We strongly recommend you use the escaping mechanisms
+; designed specifically for the database your using instead of relying on this
+; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
+; removed in PHP 5.4.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/magic-quotes-gpc
+magic_quotes_gpc = Off
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+; http://php.net/magic-quotes-runtime
+magic_quotes_runtime = Off
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+; http://php.net/magic-quotes-sybase
+magic_quotes_sybase = Off
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to empty.
+; http://php.net/default-charset
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = On
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env = ;
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1;
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
+; is supported by Apache. When this option is set to 1 PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
+;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mssql.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+;extension=php_zip.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+;iconv.input_encoding = ISO-8859-1
+;iconv.internal_encoding = ISO-8859-1
+;iconv.output_encoding = ISO-8859-1
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
+; runtime, you can define these variables by calling define_syslog_variables().
+; http://php.net/define-syslog-variables
+define_syslog_variables = Off
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail(), even in safe mode.
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if you
+; or your OS have problems with lots of files in one directory, and is
+; a more efficient layout for servers that handle lots of sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the end all be all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 | xargs rm
+
+; PHP 4.2 and less have an undocumented feature/bug that allows you to
+; to initialize a session variable in the global scope, even when register_globals
+; is disabled. PHP 4.3 and later will warn you, if this feature is used.
+; You can disable the feature and the warning separately. At this time,
+; the warning is only displayed, if bug_compat_42 is enabled. This feature
+; introduces some serious security problems if not handled correctly. It's
+; recommended that you do not use this feature on production servers. But you
+; should enable this on development servers and enable the warning as well. If you
+; do not enable the feature on development servers, you won't be warned when it's
+; used and debugging errors caused by this can be difficult to track down.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-42
+session.bug_compat_42 = On
+
+; This setting controls whether or not you are warned by PHP when initializing a
+; session value into the global space. session.bug_compat_42 must be enabled before
+; these warnings can be issued by PHP. See the directive above for more information.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-warn
+session.bug_compat_warn = On
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+session.entropy_length = 0
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; On systems that don't have /dev/urandom /dev/arandom can be used
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; internal/script encoding.
+; Some encoding cannot work as internal encoding.
+; (e.g. SJIS, BIG5, ISO-2022-*)
+; http://php.net/mbstring.internal-encoding
+;mbstring.internal_encoding = EUC-JP
+
+; http input encoding.
+; http://php.net/mbstring.http-input
+;mbstring.http_input = auto
+
+; http output encoding. mb_output_handler must be
+; registered as output buffer to function
+; http://php.net/mbstring.http-output
+;mbstring.http_output = SJIS
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; auto means
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none;
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+;mbstring.strict_detection = Off
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
+; Default: ""
+;mbstring.script_encoding=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[xsl]
+; Write operations from within XSLT are disabled by default.
+; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
+; Set it to 0 to allow all operations
+;xsl.security_prefs = 44
+
+; Local Variables:
+; tab-width: 4
+; End:
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and Lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it's
+; much more verbose when it comes to errors. We recommending using the
+; development version only in development environments as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; allow_call_time_pass_reference
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: Off
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; magic_quotes_gpc
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; register_long_arrays
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.bug_compat_42
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.bug_compat_warn
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It's been
+; recommended for several years that you not use the short tag "short cut" and
+; instead to use the full <?php and ?> tag combination. With the wide spread use
+; of XML and use of these tags by other languages, the server can become easily
+; confused and end up parsing the wrong code in the wrong context. But because
+; this short cut has been a feature for such a long time, it's currently still
+; supported for backwards compatibility, but we recommend you don't use them.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+; http://php.net/y2k-compliance
+y2k_compliance = On
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; This directive allows you to enable and disable warnings which PHP will issue
+; if you pass a value by reference at function call time. Passing values by
+; reference at function call time is a deprecated feature which will be removed
+; from PHP at some point in the near future. The acceptable method for passing a
+; value by reference to a function is by declaring the reference in the functions
+; definition, not at call time. This directive does not disable this feature, it
+; only determines whether PHP will warn you about it or not. These warnings
+; should enabled in development environments only.
+; Default Value: On (Suppress warnings)
+; Development Value: Off (Issue warnings)
+; Production Value: Off (Issue warnings)
+; http://php.net/allow-call-time-pass-reference
+allow_call_time_pass_reference = Off
+
+; Safe Mode
+; http://php.net/safe-mode
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+; http://php.net/safe-mode-gid
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+; http://php.net/safe-mode-include-dir
+safe_mode_include_dir =
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+; http://php.net/safe-mode-exec-dir
+safe_mode_exec_dir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes. In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here. By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+; Note: If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+; http://php.net/safe-mode-allowed-env-vars
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv(). These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+; http://php.net/safe-mode-protected-env-vars
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.bg = #FFFFFF
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it's automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
+; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+; http://php.net/error-reporting
+error_reporting = E_ALL | E_STRICT
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; It's recommended that errors be logged on production servers rather than
+; having the errors sent to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. But, it's strongly recommended that you
+; leave this setting off on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of inserting html
+; links to documentation related to that error. This directive controls whether
+; those HTML links appear in error messages or not. For performance and security
+; reasons, it's recommended you disable this on production servers.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: Off
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set On PHP produces clickable error messages that direct
+; to a page describing the error or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on NT, not valid in Windows 95).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. If the register_globals directive is enabled, it also determines
+; what order variables are populated into the global space. G,P,C,E & S are
+; abbreviations for the following respective super globals: GET, POST, COOKIE,
+; ENV and SERVER. There is a performance penalty paid for the registration of
+; these arrays and because ENV is not as commonly used as the others, ENV is
+; is not recommended on productions servers. You can still get access to
+; the environment variables through getenv() should you need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P,C,E & S) should
+; be registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive are
+; specified in the same manner as the variables_order directive, EXCEPT one.
+; Leaving this value empty will cause PHP to use the value set in the
+; variables_order directive. It does not mean it will leave the super globals
+; array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; Whether or not to register the EGPCS variables as global variables. You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data.
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on; Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+; http://php.net/register-globals
+register_globals = Off
+
+; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
+; are registered by PHP or not. As they are deprecated, we obviously don't
+; recommend you use them. They are on by default for compatibility reasons but
+; they are not recommended on production servers.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-long-arrays
+register_long_arrays = Off
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the SERVER and ENV variables are created when they're first
+; used (Just In Time) instead of when the script starts. If these variables
+; are not used within a script, having this directive on will result in a
+; performance gain. The PHP directives register_globals, register_long_arrays,
+; and register_argc_argv must be disabled for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Maximum size of POST data that PHP will accept.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
+; escape any character sequences in GET, POST, COOKIE and ENV data which might
+; otherwise corrupt data being placed in resources such as databases before
+; making that data available to you. Because of character encoding issues and
+; non-standard SQL implementations across many databases, it's not currently
+; possible for this feature to be 100% accurate. PHP's default behavior is to
+; enable the feature. We strongly recommend you use the escaping mechanisms
+; designed specifically for the database your using instead of relying on this
+; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
+; scheduled for removal in PHP 6.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/magic-quotes-gpc
+magic_quotes_gpc = Off
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+; http://php.net/magic-quotes-runtime
+magic_quotes_runtime = Off
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+; http://php.net/magic-quotes-sybase
+magic_quotes_sybase = Off
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to empty.
+; http://php.net/default-charset
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = On
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env = ;
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1;
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
+; is supported by Apache. When this option is set to 1 PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
+;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mssql.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+;extension=php_zip.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+;iconv.input_encoding = ISO-8859-1
+;iconv.internal_encoding = ISO-8859-1
+;iconv.output_encoding = ISO-8859-1
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
+; runtime, you can define these variables by calling define_syslog_variables().
+; http://php.net/define-syslog-variables
+define_syslog_variables = Off
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail(), even in safe mode.
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if you
+; or your OS have problems with lots of files in one directory, and is
+; a more efficient layout for servers that handle lots of sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combatting
+; session hijacking when not specifying and managing your own session id. It is
+; not the end all be all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 | xargs rm
+
+; PHP 4.2 and less have an undocumented feature/bug that allows you to
+; to initialize a session variable in the global scope, even when register_globals
+; is disabled. PHP 4.3 and later will warn you, if this feature is used.
+; You can disable the feature and the warning separately. At this time,
+; the warning is only displayed, if bug_compat_42 is enabled. This feature
+; introduces some serious security problems if not handled correctly. It's
+; recommended that you do not use this feature on production servers. But you
+; should enable this on development servers and enable the warning as well. If you
+; do not enable the feature on development servers, you won't be warned when it's
+; used and debugging errors caused by this can be difficult to track down.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-42
+session.bug_compat_42 = On
+
+; This setting controls whether or not you are warned by PHP when initializing a
+; session value into the global space. session.bug_compat_42 must be enabled before
+; these warnings can be issued by PHP. See the directive above for more information.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-warn
+session.bug_compat_warn = On
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+session.entropy_length = 0
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; On systems that don't have /dev/urandom /dev/arandom can be used
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publically accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; internal/script encoding.
+; Some encoding cannot work as internal encoding.
+; (e.g. SJIS, BIG5, ISO-2022-*)
+; http://php.net/mbstring.internal-encoding
+;mbstring.internal_encoding = EUC-JP
+
+; http input encoding.
+; http://php.net/mbstring.http-input
+;mbstring.http_input = auto
+
+; http output encoding. mb_output_handler must be
+; registered as output buffer to function
+; http://php.net/mbstring.http-output
+;mbstring.http_output = SJIS
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; auto means
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none;
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+;mbstring.strict_detection = Off
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
+; Default: ""
+;mbstring.script_encoding=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[xsl]
+; Write operations from within XSLT are disabled by default.
+; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
+; Set it to 0 to allow all operations
+;xsl.security_prefs = 44
+
+; Local Variables:
+; tab-width: 4
+; End:
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and Lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it's
+; much more verbose when it comes to errors. We recommending using the
+; development version only in development environments as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; allow_call_time_pass_reference
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: Off
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; magic_quotes_gpc
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; register_long_arrays
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.bug_compat_42
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.bug_compat_warn
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It's been
+; recommended for several years that you not use the short tag "short cut" and
+; instead to use the full <?php and ?> tag combination. With the wide spread use
+; of XML and use of these tags by other languages, the server can become easily
+; confused and end up parsing the wrong code in the wrong context. But because
+; this short cut has been a feature for such a long time, it's currently still
+; supported for backwards compatibility, but we recommend you don't use them.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+; http://php.net/y2k-compliance
+y2k_compliance = On
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; This directive allows you to enable and disable warnings which PHP will issue
+; if you pass a value by reference at function call time. Passing values by
+; reference at function call time is a deprecated feature which will be removed
+; from PHP at some point in the near future. The acceptable method for passing a
+; value by reference to a function is by declaring the reference in the functions
+; definition, not at call time. This directive does not disable this feature, it
+; only determines whether PHP will warn you about it or not. These warnings
+; should enabled in development environments only.
+; Default Value: On (Suppress warnings)
+; Development Value: Off (Issue warnings)
+; Production Value: Off (Issue warnings)
+; http://php.net/allow-call-time-pass-reference
+allow_call_time_pass_reference = Off
+
+; Safe Mode
+; http://php.net/safe-mode
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+; http://php.net/safe-mode-gid
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+; http://php.net/safe-mode-include-dir
+safe_mode_include_dir =
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+; http://php.net/safe-mode-exec-dir
+safe_mode_exec_dir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes. In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here. By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+; Note: If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+; http://php.net/safe-mode-allowed-env-vars
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv(). These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+; http://php.net/safe-mode-protected-env-vars
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.bg = #FFFFFF
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it's automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
+; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+; http://php.net/error-reporting
+error_reporting = E_ALL | E_STRICT
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; It's recommended that errors be logged on production servers rather than
+; having the errors sent to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. But, it's strongly recommended that you
+; leave this setting off on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of inserting html
+; links to documentation related to that error. This directive controls whether
+; those HTML links appear in error messages or not. For performance and security
+; reasons, it's recommended you disable this on production servers.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: Off
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set On PHP produces clickable error messages that direct
+; to a page describing the error or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on NT, not valid in Windows 95).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. If the register_globals directive is enabled, it also determines
+; what order variables are populated into the global space. G,P,C,E & S are
+; abbreviations for the following respective super globals: GET, POST, COOKIE,
+; ENV and SERVER. There is a performance penalty paid for the registration of
+; these arrays and because ENV is not as commonly used as the others, ENV is
+; is not recommended on productions servers. You can still get access to
+; the environment variables through getenv() should you need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P,C,E & S) should
+; be registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive are
+; specified in the same manner as the variables_order directive, EXCEPT one.
+; Leaving this value empty will cause PHP to use the value set in the
+; variables_order directive. It does not mean it will leave the super globals
+; array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; Whether or not to register the EGPCS variables as global variables. You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data.
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on; Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+; http://php.net/register-globals
+register_globals = Off
+
+; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
+; are registered by PHP or not. As they are deprecated, we obviously don't
+; recommend you use them. They are on by default for compatibility reasons but
+; they are not recommended on production servers.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-long-arrays
+register_long_arrays = Off
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the SERVER and ENV variables are created when they're first
+; used (Just In Time) instead of when the script starts. If these variables
+; are not used within a script, having this directive on will result in a
+; performance gain. The PHP directives register_globals, register_long_arrays,
+; and register_argc_argv must be disabled for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Maximum size of POST data that PHP will accept.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
+; escape any character sequences in GET, POST, COOKIE and ENV data which might
+; otherwise corrupt data being placed in resources such as databases before
+; making that data available to you. Because of character encoding issues and
+; non-standard SQL implementations across many databases, it's not currently
+; possible for this feature to be 100% accurate. PHP's default behavior is to
+; enable the feature. We strongly recommend you use the escaping mechanisms
+; designed specifically for the database your using instead of relying on this
+; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
+; removed in PHP 5.4.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/magic-quotes-gpc
+magic_quotes_gpc = Off
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+; http://php.net/magic-quotes-runtime
+magic_quotes_runtime = Off
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+; http://php.net/magic-quotes-sybase
+magic_quotes_sybase = Off
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to empty.
+; http://php.net/default-charset
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = On
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env = ;
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1;
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
+; is supported by Apache. When this option is set to 1 PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
+;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mssql.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+;extension=php_zip.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+;iconv.input_encoding = ISO-8859-1
+;iconv.internal_encoding = ISO-8859-1
+;iconv.output_encoding = ISO-8859-1
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
+; runtime, you can define these variables by calling define_syslog_variables().
+; http://php.net/define-syslog-variables
+define_syslog_variables = Off
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail(), even in safe mode.
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if you
+; or your OS have problems with lots of files in one directory, and is
+; a more efficient layout for servers that handle lots of sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the end all be all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 | xargs rm
+
+; PHP 4.2 and less have an undocumented feature/bug that allows you to
+; to initialize a session variable in the global scope, even when register_globals
+; is disabled. PHP 4.3 and later will warn you, if this feature is used.
+; You can disable the feature and the warning separately. At this time,
+; the warning is only displayed, if bug_compat_42 is enabled. This feature
+; introduces some serious security problems if not handled correctly. It's
+; recommended that you do not use this feature on production servers. But you
+; should enable this on development servers and enable the warning as well. If you
+; do not enable the feature on development servers, you won't be warned when it's
+; used and debugging errors caused by this can be difficult to track down.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-42
+session.bug_compat_42 = On
+
+; This setting controls whether or not you are warned by PHP when initializing a
+; session value into the global space. session.bug_compat_42 must be enabled before
+; these warnings can be issued by PHP. See the directive above for more information.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-warn
+session.bug_compat_warn = On
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+session.entropy_length = 0
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; On systems that don't have /dev/urandom /dev/arandom can be used
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; internal/script encoding.
+; Some encoding cannot work as internal encoding.
+; (e.g. SJIS, BIG5, ISO-2022-*)
+; http://php.net/mbstring.internal-encoding
+;mbstring.internal_encoding = EUC-JP
+
+; http input encoding.
+; http://php.net/mbstring.http-input
+;mbstring.http_input = auto
+
+; http output encoding. mb_output_handler must be
+; registered as output buffer to function
+; http://php.net/mbstring.http-output
+;mbstring.http_output = SJIS
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; auto means
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none;
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+;mbstring.strict_detection = Off
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
+; Default: ""
+;mbstring.script_encoding=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[xsl]
+; Write operations from within XSLT are disabled by default.
+; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
+; Set it to 0 to allow all operations
+;xsl.security_prefs = 44
+
+; Local Variables:
+; tab-width: 4
+; End:
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and Lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it's
+; much more verbose when it comes to errors. We recommending using the
+; development version only in development environments as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; allow_call_time_pass_reference
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: Off
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; magic_quotes_gpc
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; register_long_arrays
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.bug_compat_42
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.bug_compat_warn
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It's been
+; recommended for several years that you not use the short tag "short cut" and
+; instead to use the full <?php and ?> tag combination. With the wide spread use
+; of XML and use of these tags by other languages, the server can become easily
+; confused and end up parsing the wrong code in the wrong context. But because
+; this short cut has been a feature for such a long time, it's currently still
+; supported for backwards compatibility, but we recommend you don't use them.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+; http://php.net/y2k-compliance
+y2k_compliance = On
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; This directive allows you to enable and disable warnings which PHP will issue
+; if you pass a value by reference at function call time. Passing values by
+; reference at function call time is a deprecated feature which will be removed
+; from PHP at some point in the near future. The acceptable method for passing a
+; value by reference to a function is by declaring the reference in the functions
+; definition, not at call time. This directive does not disable this feature, it
+; only determines whether PHP will warn you about it or not. These warnings
+; should enabled in development environments only.
+; Default Value: On (Suppress warnings)
+; Development Value: Off (Issue warnings)
+; Production Value: Off (Issue warnings)
+; http://php.net/allow-call-time-pass-reference
+allow_call_time_pass_reference = Off
+
+; Safe Mode
+; http://php.net/safe-mode
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+; http://php.net/safe-mode-gid
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+; http://php.net/safe-mode-include-dir
+safe_mode_include_dir =
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+; http://php.net/safe-mode-exec-dir
+safe_mode_exec_dir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes. In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here. By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+; Note: If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+; http://php.net/safe-mode-allowed-env-vars
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv(). These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+; http://php.net/safe-mode-protected-env-vars
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.bg = #FFFFFF
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it's automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
+; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+; http://php.net/error-reporting
+error_reporting = E_ALL | E_STRICT
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; It's recommended that errors be logged on production servers rather than
+; having the errors sent to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. But, it's strongly recommended that you
+; leave this setting off on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of inserting html
+; links to documentation related to that error. This directive controls whether
+; those HTML links appear in error messages or not. For performance and security
+; reasons, it's recommended you disable this on production servers.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: Off
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set On PHP produces clickable error messages that direct
+; to a page describing the error or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on NT, not valid in Windows 95).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. If the register_globals directive is enabled, it also determines
+; what order variables are populated into the global space. G,P,C,E & S are
+; abbreviations for the following respective super globals: GET, POST, COOKIE,
+; ENV and SERVER. There is a performance penalty paid for the registration of
+; these arrays and because ENV is not as commonly used as the others, ENV is
+; is not recommended on productions servers. You can still get access to
+; the environment variables through getenv() should you need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P,C,E & S) should
+; be registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive are
+; specified in the same manner as the variables_order directive, EXCEPT one.
+; Leaving this value empty will cause PHP to use the value set in the
+; variables_order directive. It does not mean it will leave the super globals
+; array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; Whether or not to register the EGPCS variables as global variables. You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data.
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on; Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+; http://php.net/register-globals
+register_globals = Off
+
+; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
+; are registered by PHP or not. As they are deprecated, we obviously don't
+; recommend you use them. They are on by default for compatibility reasons but
+; they are not recommended on production servers.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-long-arrays
+register_long_arrays = Off
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the SERVER and ENV variables are created when they're first
+; used (Just In Time) instead of when the script starts. If these variables
+; are not used within a script, having this directive on will result in a
+; performance gain. The PHP directives register_globals, register_long_arrays,
+; and register_argc_argv must be disabled for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Maximum size of POST data that PHP will accept.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
+; escape any character sequences in GET, POST, COOKIE and ENV data which might
+; otherwise corrupt data being placed in resources such as databases before
+; making that data available to you. Because of character encoding issues and
+; non-standard SQL implementations across many databases, it's not currently
+; possible for this feature to be 100% accurate. PHP's default behavior is to
+; enable the feature. We strongly recommend you use the escaping mechanisms
+; designed specifically for the database your using instead of relying on this
+; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
+; scheduled for removal in PHP 6.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/magic-quotes-gpc
+magic_quotes_gpc = Off
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+; http://php.net/magic-quotes-runtime
+magic_quotes_runtime = Off
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+; http://php.net/magic-quotes-sybase
+magic_quotes_sybase = Off
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to empty.
+; http://php.net/default-charset
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = On
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env = ;
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1;
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
+; is supported by Apache. When this option is set to 1 PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
+;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mssql.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+;extension=php_zip.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+;iconv.input_encoding = ISO-8859-1
+;iconv.internal_encoding = ISO-8859-1
+;iconv.output_encoding = ISO-8859-1
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
+; runtime, you can define these variables by calling define_syslog_variables().
+; http://php.net/define-syslog-variables
+define_syslog_variables = Off
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail(), even in safe mode.
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if you
+; or your OS have problems with lots of files in one directory, and is
+; a more efficient layout for servers that handle lots of sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combatting
+; session hijacking when not specifying and managing your own session id. It is
+; not the end all be all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 | xargs rm
+
+; PHP 4.2 and less have an undocumented feature/bug that allows you to
+; to initialize a session variable in the global scope, even when register_globals
+; is disabled. PHP 4.3 and later will warn you, if this feature is used.
+; You can disable the feature and the warning separately. At this time,
+; the warning is only displayed, if bug_compat_42 is enabled. This feature
+; introduces some serious security problems if not handled correctly. It's
+; recommended that you do not use this feature on production servers. But you
+; should enable this on development servers and enable the warning as well. If you
+; do not enable the feature on development servers, you won't be warned when it's
+; used and debugging errors caused by this can be difficult to track down.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-42
+session.bug_compat_42 = On
+
+; This setting controls whether or not you are warned by PHP when initializing a
+; session value into the global space. session.bug_compat_42 must be enabled before
+; these warnings can be issued by PHP. See the directive above for more information.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-warn
+session.bug_compat_warn = On
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+session.entropy_length = 0
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; On systems that don't have /dev/urandom /dev/arandom can be used
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publically accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; internal/script encoding.
+; Some encoding cannot work as internal encoding.
+; (e.g. SJIS, BIG5, ISO-2022-*)
+; http://php.net/mbstring.internal-encoding
+;mbstring.internal_encoding = EUC-JP
+
+; http input encoding.
+; http://php.net/mbstring.http-input
+;mbstring.http_input = auto
+
+; http output encoding. mb_output_handler must be
+; registered as output buffer to function
+; http://php.net/mbstring.http-output
+;mbstring.http_output = SJIS
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; auto means
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none;
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+;mbstring.strict_detection = Off
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
+; Default: ""
+;mbstring.script_encoding=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[xsl]
+; Write operations from within XSLT are disabled by default.
+; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
+; Set it to 0 to allow all operations
+;xsl.security_prefs = 44
+
+; Local Variables:
+; tab-width: 4
+; End:
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and Lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it's
+; much more verbose when it comes to errors. We recommending using the
+; development version only in development environments as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; allow_call_time_pass_reference
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: Off
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; magic_quotes_gpc
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; register_long_arrays
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.bug_compat_42
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.bug_compat_warn
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It's been
+; recommended for several years that you not use the short tag "short cut" and
+; instead to use the full <?php and ?> tag combination. With the wide spread use
+; of XML and use of these tags by other languages, the server can become easily
+; confused and end up parsing the wrong code in the wrong context. But because
+; this short cut has been a feature for such a long time, it's currently still
+; supported for backwards compatibility, but we recommend you don't use them.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+; http://php.net/y2k-compliance
+y2k_compliance = On
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; This directive allows you to enable and disable warnings which PHP will issue
+; if you pass a value by reference at function call time. Passing values by
+; reference at function call time is a deprecated feature which will be removed
+; from PHP at some point in the near future. The acceptable method for passing a
+; value by reference to a function is by declaring the reference in the functions
+; definition, not at call time. This directive does not disable this feature, it
+; only determines whether PHP will warn you about it or not. These warnings
+; should enabled in development environments only.
+; Default Value: On (Suppress warnings)
+; Development Value: Off (Issue warnings)
+; Production Value: Off (Issue warnings)
+; http://php.net/allow-call-time-pass-reference
+allow_call_time_pass_reference = Off
+
+; Safe Mode
+; http://php.net/safe-mode
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+; http://php.net/safe-mode-gid
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+; http://php.net/safe-mode-include-dir
+safe_mode_include_dir =
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+; http://php.net/safe-mode-exec-dir
+safe_mode_exec_dir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes. In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here. By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+; Note: If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+; http://php.net/safe-mode-allowed-env-vars
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv(). These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+; http://php.net/safe-mode-protected-env-vars
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.bg = #FFFFFF
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it's automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
+; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+; http://php.net/error-reporting
+error_reporting = E_ALL | E_STRICT
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; It's recommended that errors be logged on production servers rather than
+; having the errors sent to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. But, it's strongly recommended that you
+; leave this setting off on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of inserting html
+; links to documentation related to that error. This directive controls whether
+; those HTML links appear in error messages or not. For performance and security
+; reasons, it's recommended you disable this on production servers.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: Off
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set On PHP produces clickable error messages that direct
+; to a page describing the error or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on NT, not valid in Windows 95).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. If the register_globals directive is enabled, it also determines
+; what order variables are populated into the global space. G,P,C,E & S are
+; abbreviations for the following respective super globals: GET, POST, COOKIE,
+; ENV and SERVER. There is a performance penalty paid for the registration of
+; these arrays and because ENV is not as commonly used as the others, ENV is
+; is not recommended on productions servers. You can still get access to
+; the environment variables through getenv() should you need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P,C,E & S) should
+; be registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive are
+; specified in the same manner as the variables_order directive, EXCEPT one.
+; Leaving this value empty will cause PHP to use the value set in the
+; variables_order directive. It does not mean it will leave the super globals
+; array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; Whether or not to register the EGPCS variables as global variables. You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data.
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on; Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+; http://php.net/register-globals
+register_globals = Off
+
+; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
+; are registered by PHP or not. As they are deprecated, we obviously don't
+; recommend you use them. They are on by default for compatibility reasons but
+; they are not recommended on production servers.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-long-arrays
+register_long_arrays = Off
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the SERVER and ENV variables are created when they're first
+; used (Just In Time) instead of when the script starts. If these variables
+; are not used within a script, having this directive on will result in a
+; performance gain. The PHP directives register_globals, register_long_arrays,
+; and register_argc_argv must be disabled for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Maximum size of POST data that PHP will accept.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
+; escape any character sequences in GET, POST, COOKIE and ENV data which might
+; otherwise corrupt data being placed in resources such as databases before
+; making that data available to you. Because of character encoding issues and
+; non-standard SQL implementations across many databases, it's not currently
+; possible for this feature to be 100% accurate. PHP's default behavior is to
+; enable the feature. We strongly recommend you use the escaping mechanisms
+; designed specifically for the database your using instead of relying on this
+; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
+; removed in PHP 5.4.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/magic-quotes-gpc
+magic_quotes_gpc = Off
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+; http://php.net/magic-quotes-runtime
+magic_quotes_runtime = Off
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+; http://php.net/magic-quotes-sybase
+magic_quotes_sybase = Off
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to empty.
+; http://php.net/default-charset
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = On
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env = ;
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1;
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
+; is supported by Apache. When this option is set to 1 PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
+;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mssql.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+;extension=php_zip.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+;iconv.input_encoding = ISO-8859-1
+;iconv.internal_encoding = ISO-8859-1
+;iconv.output_encoding = ISO-8859-1
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
+; runtime, you can define these variables by calling define_syslog_variables().
+; http://php.net/define-syslog-variables
+define_syslog_variables = Off
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail(), even in safe mode.
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if you
+; or your OS have problems with lots of files in one directory, and is
+; a more efficient layout for servers that handle lots of sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the end all be all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 | xargs rm
+
+; PHP 4.2 and less have an undocumented feature/bug that allows you to
+; to initialize a session variable in the global scope, even when register_globals
+; is disabled. PHP 4.3 and later will warn you, if this feature is used.
+; You can disable the feature and the warning separately. At this time,
+; the warning is only displayed, if bug_compat_42 is enabled. This feature
+; introduces some serious security problems if not handled correctly. It's
+; recommended that you do not use this feature on production servers. But you
+; should enable this on development servers and enable the warning as well. If you
+; do not enable the feature on development servers, you won't be warned when it's
+; used and debugging errors caused by this can be difficult to track down.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-42
+session.bug_compat_42 = On
+
+; This setting controls whether or not you are warned by PHP when initializing a
+; session value into the global space. session.bug_compat_42 must be enabled before
+; these warnings can be issued by PHP. See the directive above for more information.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-warn
+session.bug_compat_warn = On
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+session.entropy_length = 0
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; On systems that don't have /dev/urandom /dev/arandom can be used
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; internal/script encoding.
+; Some encoding cannot work as internal encoding.
+; (e.g. SJIS, BIG5, ISO-2022-*)
+; http://php.net/mbstring.internal-encoding
+;mbstring.internal_encoding = EUC-JP
+
+; http input encoding.
+; http://php.net/mbstring.http-input
+;mbstring.http_input = auto
+
+; http output encoding. mb_output_handler must be
+; registered as output buffer to function
+; http://php.net/mbstring.http-output
+;mbstring.http_output = SJIS
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; auto means
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none;
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+;mbstring.strict_detection = Off
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
+; Default: ""
+;mbstring.script_encoding=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[xsl]
+; Write operations from within XSLT are disabled by default.
+; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
+; Set it to 0 to allow all operations
+;xsl.security_prefs = 44
+
+; Local Variables:
+; tab-width: 4
+; End:
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and Lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it's
+; much more verbose when it comes to errors. We recommending using the
+; development version only in development environments as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; allow_call_time_pass_reference
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: Off
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; magic_quotes_gpc
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; register_long_arrays
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.bug_compat_42
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.bug_compat_warn
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It's been
+; recommended for several years that you not use the short tag "short cut" and
+; instead to use the full <?php and ?> tag combination. With the wide spread use
+; of XML and use of these tags by other languages, the server can become easily
+; confused and end up parsing the wrong code in the wrong context. But because
+; this short cut has been a feature for such a long time, it's currently still
+; supported for backwards compatibility, but we recommend you don't use them.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+; http://php.net/y2k-compliance
+y2k_compliance = On
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; This directive allows you to enable and disable warnings which PHP will issue
+; if you pass a value by reference at function call time. Passing values by
+; reference at function call time is a deprecated feature which will be removed
+; from PHP at some point in the near future. The acceptable method for passing a
+; value by reference to a function is by declaring the reference in the functions
+; definition, not at call time. This directive does not disable this feature, it
+; only determines whether PHP will warn you about it or not. These warnings
+; should enabled in development environments only.
+; Default Value: On (Suppress warnings)
+; Development Value: Off (Issue warnings)
+; Production Value: Off (Issue warnings)
+; http://php.net/allow-call-time-pass-reference
+allow_call_time_pass_reference = Off
+
+; Safe Mode
+; http://php.net/safe-mode
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+; http://php.net/safe-mode-gid
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+; http://php.net/safe-mode-include-dir
+safe_mode_include_dir =
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+; http://php.net/safe-mode-exec-dir
+safe_mode_exec_dir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes. In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here. By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+; Note: If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+; http://php.net/safe-mode-allowed-env-vars
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv(). These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+; http://php.net/safe-mode-protected-env-vars
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.bg = #FFFFFF
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it's automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
+; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+; http://php.net/error-reporting
+error_reporting = E_ALL | E_STRICT
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; It's recommended that errors be logged on production servers rather than
+; having the errors sent to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. But, it's strongly recommended that you
+; leave this setting off on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of inserting html
+; links to documentation related to that error. This directive controls whether
+; those HTML links appear in error messages or not. For performance and security
+; reasons, it's recommended you disable this on production servers.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: Off
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set On PHP produces clickable error messages that direct
+; to a page describing the error or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on NT, not valid in Windows 95).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. If the register_globals directive is enabled, it also determines
+; what order variables are populated into the global space. G,P,C,E & S are
+; abbreviations for the following respective super globals: GET, POST, COOKIE,
+; ENV and SERVER. There is a performance penalty paid for the registration of
+; these arrays and because ENV is not as commonly used as the others, ENV is
+; is not recommended on productions servers. You can still get access to
+; the environment variables through getenv() should you need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P,C,E & S) should
+; be registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive are
+; specified in the same manner as the variables_order directive, EXCEPT one.
+; Leaving this value empty will cause PHP to use the value set in the
+; variables_order directive. It does not mean it will leave the super globals
+; array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; Whether or not to register the EGPCS variables as global variables. You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data.
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on; Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+; http://php.net/register-globals
+register_globals = Off
+
+; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
+; are registered by PHP or not. As they are deprecated, we obviously don't
+; recommend you use them. They are on by default for compatibility reasons but
+; they are not recommended on production servers.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-long-arrays
+register_long_arrays = Off
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the SERVER and ENV variables are created when they're first
+; used (Just In Time) instead of when the script starts. If these variables
+; are not used within a script, having this directive on will result in a
+; performance gain. The PHP directives register_globals, register_long_arrays,
+; and register_argc_argv must be disabled for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Maximum size of POST data that PHP will accept.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
+; escape any character sequences in GET, POST, COOKIE and ENV data which might
+; otherwise corrupt data being placed in resources such as databases before
+; making that data available to you. Because of character encoding issues and
+; non-standard SQL implementations across many databases, it's not currently
+; possible for this feature to be 100% accurate. PHP's default behavior is to
+; enable the feature. We strongly recommend you use the escaping mechanisms
+; designed specifically for the database your using instead of relying on this
+; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
+; scheduled for removal in PHP 6.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/magic-quotes-gpc
+magic_quotes_gpc = Off
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+; http://php.net/magic-quotes-runtime
+magic_quotes_runtime = Off
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+; http://php.net/magic-quotes-sybase
+magic_quotes_sybase = Off
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to empty.
+; http://php.net/default-charset
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = On
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env = ;
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1;
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
+; is supported by Apache. When this option is set to 1 PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
+;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mssql.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+;extension=php_zip.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+;iconv.input_encoding = ISO-8859-1
+;iconv.internal_encoding = ISO-8859-1
+;iconv.output_encoding = ISO-8859-1
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
+; runtime, you can define these variables by calling define_syslog_variables().
+; http://php.net/define-syslog-variables
+define_syslog_variables = Off
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail(), even in safe mode.
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if you
+; or your OS have problems with lots of files in one directory, and is
+; a more efficient layout for servers that handle lots of sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combatting
+; session hijacking when not specifying and managing your own session id. It is
+; not the end all be all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 | xargs rm
+
+; PHP 4.2 and less have an undocumented feature/bug that allows you to
+; to initialize a session variable in the global scope, even when register_globals
+; is disabled. PHP 4.3 and later will warn you, if this feature is used.
+; You can disable the feature and the warning separately. At this time,
+; the warning is only displayed, if bug_compat_42 is enabled. This feature
+; introduces some serious security problems if not handled correctly. It's
+; recommended that you do not use this feature on production servers. But you
+; should enable this on development servers and enable the warning as well. If you
+; do not enable the feature on development servers, you won't be warned when it's
+; used and debugging errors caused by this can be difficult to track down.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-42
+session.bug_compat_42 = On
+
+; This setting controls whether or not you are warned by PHP when initializing a
+; session value into the global space. session.bug_compat_42 must be enabled before
+; these warnings can be issued by PHP. See the directive above for more information.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-warn
+session.bug_compat_warn = On
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+session.entropy_length = 0
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; On systems that don't have /dev/urandom /dev/arandom can be used
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publically accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; internal/script encoding.
+; Some encoding cannot work as internal encoding.
+; (e.g. SJIS, BIG5, ISO-2022-*)
+; http://php.net/mbstring.internal-encoding
+;mbstring.internal_encoding = EUC-JP
+
+; http input encoding.
+; http://php.net/mbstring.http-input
+;mbstring.http_input = auto
+
+; http output encoding. mb_output_handler must be
+; registered as output buffer to function
+; http://php.net/mbstring.http-output
+;mbstring.http_output = SJIS
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; auto means
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none;
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+;mbstring.strict_detection = Off
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
+; Default: ""
+;mbstring.script_encoding=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[xsl]
+; Write operations from within XSLT are disabled by default.
+; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
+; Set it to 0 to allow all operations
+;xsl.security_prefs = 44
+
+; Local Variables:
+; tab-width: 4
+; End:
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and Lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it's
+; much more verbose when it comes to errors. We recommending using the
+; development version only in development environments as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; allow_call_time_pass_reference
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+
+; html_errors
+; Default Value: On
+; Development Value: On
+; Production value: Off
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; magic_quotes_gpc
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; register_long_arrays
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.bug_compat_42
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.bug_compat_warn
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.hash_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; track_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; url_rewriter.tags
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It's been
+; recommended for several years that you not use the short tag "short cut" and
+; instead to use the full <?php and ?> tag combination. With the wide spread use
+; of XML and use of these tags by other languages, the server can become easily
+; confused and end up parsing the wrong code in the wrong context. But because
+; this short cut has been a feature for such a long time, it's currently still
+; supported for backwards compatibility, but we recommend you don't use them.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+; http://php.net/asp-tags
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+; http://php.net/y2k-compliance
+y2k_compliance = On
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 17
+
+; This directive allows you to enable and disable warnings which PHP will issue
+; if you pass a value by reference at function call time. Passing values by
+; reference at function call time is a deprecated feature which will be removed
+; from PHP at some point in the near future. The acceptable method for passing a
+; value by reference to a function is by declaring the reference in the functions
+; definition, not at call time. This directive does not disable this feature, it
+; only determines whether PHP will warn you about it or not. These warnings
+; should enabled in development environments only.
+; Default Value: On (Suppress warnings)
+; Development Value: Off (Issue warnings)
+; Production Value: Off (Issue warnings)
+; http://php.net/allow-call-time-pass-reference
+allow_call_time_pass_reference = Off
+
+; Safe Mode
+; http://php.net/safe-mode
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+; http://php.net/safe-mode-gid
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+; http://php.net/safe-mode-include-dir
+safe_mode_include_dir =
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+; http://php.net/safe-mode-exec-dir
+safe_mode_exec_dir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes. In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here. By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+; Note: If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+; http://php.net/safe-mode-allowed-env-vars
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv(). These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+; http://php.net/safe-mode-protected-env-vars
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.bg = #FFFFFF
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it's automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
+; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
+; Default Value: E_ALL & ~E_NOTICE
+; Development Value: E_ALL | E_STRICT
+; Production Value: E_ALL & ~E_DEPRECATED
+; http://php.net/error-reporting
+error_reporting = E_ALL | E_STRICT
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; It's recommended that errors be logged on production servers rather than
+; having the errors sent to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. But, it's strongly recommended that you
+; leave this setting off on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = On
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/track-errors
+track_errors = On
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of inserting html
+; links to documentation related to that error. This directive controls whether
+; those HTML links appear in error messages or not. For performance and security
+; reasons, it's recommended you disable this on production servers.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: Off
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set On PHP produces clickable error messages that direct
+; to a page describing the error or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on NT, not valid in Windows 95).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. If the register_globals directive is enabled, it also determines
+; what order variables are populated into the global space. G,P,C,E & S are
+; abbreviations for the following respective super globals: GET, POST, COOKIE,
+; ENV and SERVER. There is a performance penalty paid for the registration of
+; these arrays and because ENV is not as commonly used as the others, ENV is
+; is not recommended on productions servers. You can still get access to
+; the environment variables through getenv() should you need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P,C,E & S) should
+; be registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive are
+; specified in the same manner as the variables_order directive, EXCEPT one.
+; Leaving this value empty will cause PHP to use the value set in the
+; variables_order directive. It does not mean it will leave the super globals
+; array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; Whether or not to register the EGPCS variables as global variables. You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data.
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on; Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+; http://php.net/register-globals
+register_globals = Off
+
+; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
+; are registered by PHP or not. As they are deprecated, we obviously don't
+; recommend you use them. They are on by default for compatibility reasons but
+; they are not recommended on production servers.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-long-arrays
+register_long_arrays = Off
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the SERVER and ENV variables are created when they're first
+; used (Just In Time) instead of when the script starts. If these variables
+; are not used within a script, having this directive on will result in a
+; performance gain. The PHP directives register_globals, register_long_arrays,
+; and register_argc_argv must be disabled for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Maximum size of POST data that PHP will accept.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
+; escape any character sequences in GET, POST, COOKIE and ENV data which might
+; otherwise corrupt data being placed in resources such as databases before
+; making that data available to you. Because of character encoding issues and
+; non-standard SQL implementations across many databases, it's not currently
+; possible for this feature to be 100% accurate. PHP's default behavior is to
+; enable the feature. We strongly recommend you use the escaping mechanisms
+; designed specifically for the database your using instead of relying on this
+; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
+; removed in PHP 5.4.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/magic-quotes-gpc
+magic_quotes_gpc = Off
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+; http://php.net/magic-quotes-runtime
+magic_quotes_runtime = Off
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+; http://php.net/magic-quotes-sybase
+magic_quotes_sybase = Off
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a character encoding using
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to empty.
+; http://php.net/default-charset
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
+; to disable this feature.
+; http://php.net/always-populate-raw-post-data
+;always_populate_raw_post_data = On
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/php5:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env = ;
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1;
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
+; is supported by Apache. When this option is set to 1 PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; ... or with a path:
+;
+; extension=/path/to/extension/msql.so
+;
+; If you only provide the name of the extension, PHP will look for it in its
+; default extension directory.
+;
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_fileinfo.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_intl.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_exif.dll ; Must be after mbstring as it depends on it
+;extension=php_mysql.dll
+;extension=php_mysqli.dll
+;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
+;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
+;extension=php_openssl.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mssql.dll
+;extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=php_snmp.dll
+
+;extension=php_soap.dll
+;extension=php_sockets.dll
+;extension=php_sqlite.dll
+;extension=php_sqlite3.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+;extension=php_zip.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+;iconv.input_encoding = ISO-8859-1
+;iconv.internal_encoding = ISO-8859-1
+;iconv.output_encoding = ISO-8859-1
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+
+[sqlite]
+; http://php.net/sqlite.assoc-case
+;sqlite.assoc_case = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
+; runtime, you can define these variables by calling define_syslog_variables().
+; http://php.net/define-syslog-variables
+define_syslog_variables = Off
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail(), even in safe mode.
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = On
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+
+[SQL]
+; http://php.net/sql.safe-mode
+sql.safe_mode = Off
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links. -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = On
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+; http://php.net/sybct.allow-persistent
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/sybct.max-persistent
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/sybct.max-links
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+; http://php.net/sybct.min-server-severity
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+; http://php.net/sybct.min-client-severity
+sybct.min_client_severity = 10
+
+; Set per-context timeout
+; http://php.net/sybct.timeout
+;sybct.timeout=
+
+;sybct.packet_size
+
+; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
+; Default: one minute
+;sybct.login_timeout=
+
+; The name of the host you claim to be connecting from, for display by sp_who.
+; Default: none
+;sybct.hostname=
+
+; Allows you to define how often deadlocks are to be retried. -1 means "forever".
+; Default: 0
+;sybct.deadlock_retry_count=
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if you
+; or your OS have problems with lots of files in one directory, and is
+; a more efficient layout for servers that handle lots of sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+session.save_path = "/tmp"
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the end all be all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 | xargs rm
+
+; PHP 4.2 and less have an undocumented feature/bug that allows you to
+; to initialize a session variable in the global scope, even when register_globals
+; is disabled. PHP 4.3 and later will warn you, if this feature is used.
+; You can disable the feature and the warning separately. At this time,
+; the warning is only displayed, if bug_compat_42 is enabled. This feature
+; introduces some serious security problems if not handled correctly. It's
+; recommended that you do not use this feature on production servers. But you
+; should enable this on development servers and enable the warning as well. If you
+; do not enable the feature on development servers, you won't be warned when it's
+; used and debugging errors caused by this can be difficult to track down.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-42
+session.bug_compat_42 = On
+
+; This setting controls whether or not you are warned by PHP when initializing a
+; session value into the global space. session.bug_compat_42 must be enabled before
+; these warnings can be issued by PHP. See the directive above for more information.
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/session.bug-compat-warn
+session.bug_compat_warn = On
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; How many bytes to read from the file.
+; http://php.net/session.entropy-length
+session.entropy_length = 0
+
+; Specified here to create the session id.
+; http://php.net/session.entropy-file
+; On systems that don't have /dev/urandom /dev/arandom can be used
+; On windows, setting the entropy_length setting will activate the
+; Windows random source (using the CryptoAPI)
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Select a hash function for use in generating session ids.
+; Possible Values
+; 0 (MD5 128 bits)
+; 1 (SHA-1 160 bits)
+; This option may also be set to the name of any hash function supported by
+; the hash extension. A list of available hashes is returned by the hash_algos()
+; function.
+; http://php.net/session.hash-function
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+; 4 (4 bits: 0-9, a-f)
+; 5 (5 bits: 0-9, a-v)
+; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form=,fieldset="
+; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
+; http://php.net/url-rewriter.tags
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.conf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; internal/script encoding.
+; Some encoding cannot work as internal encoding.
+; (e.g. SJIS, BIG5, ISO-2022-*)
+; http://php.net/mbstring.internal-encoding
+;mbstring.internal_encoding = EUC-JP
+
+; http input encoding.
+; http://php.net/mbstring.http-input
+;mbstring.http_input = auto
+
+; http output encoding. mb_output_handler must be
+; registered as output buffer to function
+; http://php.net/mbstring.http-output
+;mbstring.http_output = SJIS
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; auto means
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none;
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+;mbstring.strict_detection = Off
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
+; Default: ""
+;mbstring.script_encoding=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[mcrypt]
+; For more information about mcrypt settings see http://php.net/mcrypt-module-open
+
+; Directory where to load mcrypt algorithms
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.algorithms_dir=
+
+; Directory where to load mcrypt modes
+; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
+;mcrypt.modes_dir=
+
+[dba]
+;dba.default_handler=
+
+[xsl]
+; Write operations from within XSLT are disabled by default.
+; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
+; Set it to 0 to allow all operations
+;xsl.security_prefs = 44
+
+; Local Variables:
+; tab-width: 4
+; End:
+++ /dev/null
-#
-# "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $"
-#
-# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
-# complete description of this file.
-#
-
-# Log general information in error_log - change "warn" to "debug"
-# for troubleshooting...
-LogLevel warn
-
-# Administrator user group...
-SystemGroup lpadmin
-
-
-# Only listen for connections from the local machine.
-Listen localhost:631
-Listen /var/run/cups/cups.sock
-
-# Show shared printers on the local network.
-# We switch this off by default in Gentoo, to avoid an unnecessary open port.
-Browsing Off
-BrowseOrder allow,deny
-BrowseAllow all
-BrowseLocalProtocols CUPS
-
-# Default authentication type, when authentication is required...
-DefaultAuthType Basic
-
-# Web interface setting...
-WebInterface Yes
-
-# Restrict access to the server...
-<Location />
- Order allow,deny
-</Location>
-
-# Restrict access to the admin pages...
-<Location /admin>
- Order allow,deny
-</Location>
-
-# Restrict access to configuration files...
-<Location /admin/conf>
- AuthType Default
- Require user @SYSTEM
- Order allow,deny
-</Location>
-
-# Set the default printer/job policies...
-<Policy default>
- # Job/subscription privacy...
- JobPrivateAccess default
- JobPrivateValues default
- SubscriptionPrivateAccess default
- SubscriptionPrivateValues default
-
- # Job-related operations must be done by the owner or an administrator...
- <Limit Create-Job Print-Job Print-URI Validate-Job>
- Order deny,allow
- </Limit>
-
- <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
- Require user @OWNER @SYSTEM
- Order deny,allow
- </Limit>
-
- # All administration operations require an administrator to authenticate...
- <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
- AuthType Default
- Require user @SYSTEM
- Order deny,allow
- </Limit>
-
- # All printer operations require a printer operator to authenticate...
- <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
- AuthType Default
- Require user @SYSTEM
- Order deny,allow
- </Limit>
-
- # Only the owner or an administrator can cancel or authenticate a job...
- <Limit Cancel-Job CUPS-Authenticate-Job>
- Require user @OWNER @SYSTEM
- Order deny,allow
- </Limit>
-
- <Limit All>
- Order deny,allow
- </Limit>
-</Policy>
-
-# Set the authenticated printer/job policies...
-<Policy authenticated>
- # Job/subscription privacy...
- JobPrivateAccess default
- JobPrivateValues default
- SubscriptionPrivateAccess default
- SubscriptionPrivateValues default
-
- # Job-related operations must be done by the owner or an administrator...
- <Limit Create-Job Print-Job Print-URI Validate-Job>
- AuthType Default
- Order deny,allow
- </Limit>
-
- <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
- AuthType Default
- Require user @OWNER @SYSTEM
- Order deny,allow
- </Limit>
-
- # All administration operations require an administrator to authenticate...
- <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
- AuthType Default
- Require user @SYSTEM
- Order deny,allow
- </Limit>
-
- # All printer operations require a printer operator to authenticate...
- <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
- AuthType Default
- Require user @SYSTEM
- Order deny,allow
- </Limit>
-
- # Only the owner or an administrator can cancel or authenticate a job...
- <Limit Cancel-Job CUPS-Authenticate-Job>
- AuthType Default
- Require user @OWNER @SYSTEM
- Order deny,allow
- </Limit>
-
- <Limit All>
- Order deny,allow
- </Limit>
-</Policy>
-
-#
-# End of "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $".
-#
+++ /dev/null
-#
-# "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $"
-#
-# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
-# complete description of this file.
-#
-
-# Log general information in error_log - change "warn" to "debug"
-# for troubleshooting...
-LogLevel warn
-
-# Administrator user group...
-SystemGroup lpadmin
-
-
-# Only listen for connections from the local machine.
-Listen localhost:631
-Listen /var/run/cups/cups.sock
-
-# Show shared printers on the local network.
-# We switch this off by default in Gentoo, to avoid an unnecessary open port.
-Browsing Off
-BrowseOrder allow,deny
-BrowseAllow all
-BrowseLocalProtocols CUPS
-
-# Default authentication type, when authentication is required...
-DefaultAuthType Basic
-
-# Web interface setting...
-WebInterface Yes
-
-# Restrict access to the server...
-<Location />
- Order allow,deny
-</Location>
-
-# Restrict access to the admin pages...
-<Location /admin>
- Order allow,deny
-</Location>
-
-# Restrict access to configuration files...
-<Location /admin/conf>
- AuthType Default
- Require user @SYSTEM
- Order allow,deny
-</Location>
-
-# Set the default printer/job policies...
-<Policy default>
- # Job/subscription privacy...
- JobPrivateAccess default
- JobPrivateValues default
- SubscriptionPrivateAccess default
- SubscriptionPrivateValues default
-
- # Job-related operations must be done by the owner or an administrator...
- <Limit Create-Job Print-Job Print-URI Validate-Job>
- Order deny,allow
- </Limit>
-
- <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
- Require user @OWNER @SYSTEM
- Order deny,allow
- </Limit>
-
- # All administration operations require an administrator to authenticate...
- <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
- AuthType Default
- Require user @SYSTEM
- Order deny,allow
- </Limit>
-
- # All printer operations require a printer operator to authenticate...
- <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
- AuthType Default
- Require user @SYSTEM
- Order deny,allow
- </Limit>
-
- # Only the owner or an administrator can cancel or authenticate a job...
- <Limit Cancel-Job CUPS-Authenticate-Job>
- Require user @OWNER @SYSTEM
- Order deny,allow
- </Limit>
-
- <Limit All>
- Order deny,allow
- </Limit>
-</Policy>
-
-# Set the authenticated printer/job policies...
-<Policy authenticated>
- # Job/subscription privacy...
- JobPrivateAccess default
- JobPrivateValues default
- SubscriptionPrivateAccess default
- SubscriptionPrivateValues default
-
- # Job-related operations must be done by the owner or an administrator...
- <Limit Create-Job Print-Job Print-URI Validate-Job>
- AuthType Default
- Order deny,allow
- </Limit>
-
- <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
- AuthType Default
- Require user @OWNER @SYSTEM
- Order deny,allow
- </Limit>
-
- # All administration operations require an administrator to authenticate...
- <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
- AuthType Default
- Require user @SYSTEM
- Order deny,allow
- </Limit>
-
- # All printer operations require a printer operator to authenticate...
- <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
- AuthType Default
- Require user @SYSTEM
- Order deny,allow
- </Limit>
-
- # Only the owner or an administrator can cancel or authenticate a job...
- <Limit Cancel-Job CUPS-Authenticate-Job>
- AuthType Default
- Require user @OWNER @SYSTEM
- Order deny,allow
- </Limit>
-
- <Limit All>
- Order deny,allow
- </Limit>
-</Policy>
-
-#
-# End of "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $".
-#
+++ /dev/null
-#
-# "$Id: snmp.conf.in 9045 2010-03-24 07:48:42Z mike $"
-#
-# Sample SNMP configuration file for CUPS. See "man cups-snmp.conf" for a
-# complete description of this file.
-#
-
-Address @LOCAL
-Community public
-
-#
-# End of "$Id: snmp.conf.in 9045 2010-03-24 07:48:42Z mike $".
-#
#
-# "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $"
+# "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $"
#
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
Listen /var/run/cups/cups.sock
# Show shared printers on the local network.
-Browsing On
+# We switch this off by default in Gentoo, to avoid an unnecessary open port.
+Browsing Off
BrowseOrder allow,deny
BrowseAllow all
BrowseLocalProtocols CUPS
# Default authentication type, when authentication is required...
DefaultAuthType Basic
+# Web interface setting...
+WebInterface Yes
+
# Restrict access to the server...
<Location />
Order allow,deny
# Set the default printer/job policies...
<Policy default>
+ # Job/subscription privacy...
+ JobPrivateAccess default
+ JobPrivateValues default
+ SubscriptionPrivateAccess default
+ SubscriptionPrivateValues default
+
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
- <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
</Limit>
# All printer operations require a printer operator to authenticate...
- <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
# Set the authenticated printer/job policies...
<Policy authenticated>
+ # Job/subscription privacy...
+ JobPrivateAccess default
+ JobPrivateValues default
+ SubscriptionPrivateAccess default
+ SubscriptionPrivateValues default
+
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
- <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
- <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Policy>
#
-# End of "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $".
+# End of "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $".
#
#
-# "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $"
+# "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $"
#
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
Listen /var/run/cups/cups.sock
# Show shared printers on the local network.
-Browsing On
+# We switch this off by default in Gentoo, to avoid an unnecessary open port.
+Browsing Off
BrowseOrder allow,deny
BrowseAllow all
BrowseLocalProtocols CUPS
# Default authentication type, when authentication is required...
DefaultAuthType Basic
+# Web interface setting...
+WebInterface Yes
+
# Restrict access to the server...
<Location />
Order allow,deny
# Set the default printer/job policies...
<Policy default>
+ # Job/subscription privacy...
+ JobPrivateAccess default
+ JobPrivateValues default
+ SubscriptionPrivateAccess default
+ SubscriptionPrivateValues default
+
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
- <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
</Limit>
# All printer operations require a printer operator to authenticate...
- <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
# Set the authenticated printer/job policies...
<Policy authenticated>
+ # Job/subscription privacy...
+ JobPrivateAccess default
+ JobPrivateValues default
+ SubscriptionPrivateAccess default
+ SubscriptionPrivateValues default
+
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
- <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
- <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Policy>
#
-# End of "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $".
+# End of "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $".
#
#
-# "$Id$"
+# "$Id: snmp.conf.in 9045 2010-03-24 07:48:42Z mike $"
#
# Sample SNMP configuration file for CUPS. See "man cups-snmp.conf" for a
# complete description of this file.
Community public
#
-# End of "$Id$".
+# End of "$Id: snmp.conf.in 9045 2010-03-24 07:48:42Z mike $".
#
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 17
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
-zend.enable_gc = On
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL | E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; removed in PHP 5.4.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publicly accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.conf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[xsl]
-; Write operations from within XSLT are disabled by default.
-; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
-; Set it to 0 to allow all operations
-;xsl.security_prefs = 44
-
-; Local Variables:
-; tab-width: 4
-; End:
; development and early testing.
;
; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
+; removed in PHP 5.4.
; Default Value: On
; Development Value: Off
; Production Value: Off
;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
+; the session id. We encourage this operation as it's very helpful in combating
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it's a good start.
; http://php.net/session.use-only-cookies
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
-; in publically accessible computer.
+; in publicly accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://php.net/session.use-trans-sid
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 17
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
-zend.enable_gc = On
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL | E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; removed in PHP 5.4.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publicly accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.conf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[xsl]
-; Write operations from within XSLT are disabled by default.
-; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
-; Set it to 0 to allow all operations
-;xsl.security_prefs = 44
-
-; Local Variables:
-; tab-width: 4
-; End:
; development and early testing.
;
; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
+; removed in PHP 5.4.
; Default Value: On
; Development Value: Off
; Production Value: Off
;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
+; the session id. We encourage this operation as it's very helpful in combating
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it's a good start.
; http://php.net/session.use-only-cookies
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
-; in publically accessible computer.
+; in publicly accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://php.net/session.use-trans-sid
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 17
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
-zend.enable_gc = On
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL | E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; removed in PHP 5.4.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publicly accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.conf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[xsl]
-; Write operations from within XSLT are disabled by default.
-; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
-; Set it to 0 to allow all operations
-;xsl.security_prefs = 44
-
-; Local Variables:
-; tab-width: 4
-; End:
; development and early testing.
;
; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
+; removed in PHP 5.4.
; Default Value: On
; Development Value: Off
; Production Value: Off
;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
+; the session id. We encourage this operation as it's very helpful in combating
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it's a good start.
; http://php.net/session.use-only-cookies
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
-; in publically accessible computer.
+; in publicly accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://php.net/session.use-trans-sid
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 17
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
-zend.enable_gc = On
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL | E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; removed in PHP 5.4.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publicly accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.conf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[xsl]
-; Write operations from within XSLT are disabled by default.
-; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
-; Set it to 0 to allow all operations
-;xsl.security_prefs = 44
-
-; Local Variables:
-; tab-width: 4
-; End:
; development and early testing.
;
; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
+; removed in PHP 5.4.
; Default Value: On
; Development Value: Off
; Production Value: Off
;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
+; the session id. We encourage this operation as it's very helpful in combating
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it's a good start.
; http://php.net/session.use-only-cookies
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
-; in publically accessible computer.
+; in publicly accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://php.net/session.use-trans-sid
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 17
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
-zend.enable_gc = On
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL | E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; removed in PHP 5.4.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publicly accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.conf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[xsl]
-; Write operations from within XSLT are disabled by default.
-; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
-; Set it to 0 to allow all operations
-;xsl.security_prefs = 44
-
-; Local Variables:
-; tab-width: 4
-; End:
; development and early testing.
;
; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
+; removed in PHP 5.4.
; Default Value: On
; Development Value: Off
; Production Value: Off
;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
+; the session id. We encourage this operation as it's very helpful in combating
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it's a good start.
; http://php.net/session.use-only-cookies
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
-; in publically accessible computer.
+; in publicly accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://php.net/session.use-trans-sid
+++ /dev/null
-/etc/init.d/net.eth1
\ No newline at end of file
projects / config / uhu1 / etc.git / commitdiff