saving uncommitted changes in /etc prior to emerge run

diff --git a/.etckeeper b/.etckeeper
index 86bd7b95276014e6600625a49051f141b679ccec..7dd25ecd3dcbdecff6db08dbb8081ab9705c6592 100755 (executable)
--- a/.etckeeper
+++ b/.etckeeper
@@ -355,6 +355,15 @@ maybe chmod 0755 './config-archive/etc/portage/savedconfig'
 maybe chmod 0755 './config-archive/etc/portage/savedconfig/sys-apps'
 maybe chmod 0644 './config-archive/etc/portage/savedconfig/sys-apps/busybox-1.19.3-r1'
 maybe chmod 0644 './config-archive/etc/portage/savedconfig/sys-apps/busybox-1.19.3-r1.dist'
+maybe chmod 0755 './config-archive/etc/pulse'
+maybe chmod 0644 './config-archive/etc/pulse/client.conf'
+maybe chmod 0644 './config-archive/etc/pulse/client.conf.dist'
+maybe chmod 0644 './config-archive/etc/pulse/daemon.conf'
+maybe chmod 0644 './config-archive/etc/pulse/daemon.conf.dist'
+maybe chmod 0644 './config-archive/etc/pulse/default.pa'
+maybe chmod 0644 './config-archive/etc/pulse/default.pa.dist'
+maybe chmod 0644 './config-archive/etc/pulse/system.pa'
+maybe chmod 0644 './config-archive/etc/pulse/system.pa.dist'
 maybe chmod 0755 './config-archive/etc/ssh'
 maybe chmod 0644 './config-archive/etc/ssh/ssh_config'
 maybe chmod 0644 './config-archive/etc/ssh/ssh_config.dist'
@@ -363,6 +372,10 @@ maybe chmod 0600 './config-archive/etc/ssh/sshd_config.1'
 maybe chmod 0600 './config-archive/etc/ssh/sshd_config.dist'
 maybe chmod 0440 './config-archive/etc/sudoers'
 maybe chmod 0440 './config-archive/etc/sudoers.dist.new'
+maybe chmod 0755 './config-archive/etc/xdg'
+maybe chmod 0755 './config-archive/etc/xdg/autostart'
+maybe chmod 0644 './config-archive/etc/xdg/autostart/pulseaudio.desktop'
+maybe chmod 0644 './config-archive/etc/xdg/autostart/pulseaudio.desktop.dist'
 maybe chown mail './courier'
 maybe chgrp mail './courier'
 maybe chmod 0755 './courier'
@@ -1338,10 +1351,6 @@ maybe chmod 0644 './profile.d/java-config-2.sh'
 maybe chmod 0644 './profile.env'
 maybe chmod 0644 './protocols'
 maybe chmod 0755 './pulse'
-maybe chmod 0644 './pulse/._cfg0000_client.conf'
-maybe chmod 0644 './pulse/._cfg0000_daemon.conf'
-maybe chmod 0644 './pulse/._cfg0000_default.pa'
-maybe chmod 0644 './pulse/._cfg0000_system.pa'
 maybe chmod 0644 './pulse/client.conf'
 maybe chmod 0644 './pulse/daemon.conf'
 maybe chmod 0644 './pulse/default.pa'
@@ -1702,7 +1711,6 @@ maybe chmod 0755 './xdg'
 maybe chmod 0755 './xdg/Thunar'
 maybe chmod 0644 './xdg/Thunar/uca.xml'
 maybe chmod 0755 './xdg/autostart'
-maybe chmod 0644 './xdg/autostart/._cfg0000_pulseaudio.desktop'
 maybe chmod 0644 './xdg/autostart/Gentoo-print-applet.desktop'
 maybe chmod 0644 './xdg/autostart/evolution-alarm-notify.desktop'
 maybe chmod 0644 './xdg/autostart/gdu-notification-daemon.desktop'

diff --git a/config-archive/etc/pulse/client.conf b/config-archive/etc/pulse/client.conf
new file mode 100644 (file)
index 0000000..b3738ab
--- /dev/null
+++ b/config-archive/etc/pulse/client.conf
@@ -0,0 +1,33 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA.
+
+## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
+## more information. Default values a commented out.  Use either ; or # for
+## commenting.
+
+; default-sink =
+; default-source =
+; default-server =
+
+; autospawn = yes
+; daemon-binary = /usr/bin/pulseaudio
+; extra-arguments = --log-target=syslog
+
+; cookie-file =
+
+; enable-shm = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB

diff --git a/config-archive/etc/pulse/client.conf.dist b/config-archive/etc/pulse/client.conf.dist
new file mode 100644 (file)
index 0000000..342395d
--- /dev/null
+++ b/config-archive/etc/pulse/client.conf.dist
@@ -0,0 +1,37 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA.
+
+## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
+## more information. Default values are commented out.  Use either ; or # for
+## commenting.
+
+; default-sink =
+; default-source =
+; default-server =
+; default-dbus-server =
+
+; autospawn = yes
+; daemon-binary = /usr/bin/pulseaudio
+; extra-arguments = --log-target=syslog
+
+; cookie-file =
+
+; enable-shm = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+
+; auto-connect-localhost = no
+; auto-connect-display = no

diff --git a/config-archive/etc/pulse/daemon.conf b/config-archive/etc/pulse/daemon.conf
new file mode 100644 (file)
index 0000000..e058f49
--- /dev/null
+++ b/config-archive/etc/pulse/daemon.conf
@@ -0,0 +1,81 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA.
+
+## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
+## more information. Default values a commented out.  Use either ; or # for
+## commenting.
+
+; daemonize = no
+; fail = yes
+; allow-module-loading = yes
+; allow-exit = yes
+; use-pid-file = yes
+; system-instance = no
+; enable-shm = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+; lock-memory = no
+; cpu-limit = no
+
+; high-priority = yes
+; nice-level = -11
+
+; realtime-scheduling = yes
+; realtime-priority = 5
+
+; exit-idle-time = 20
+; scache-idle-time = 20
+
+; dl-search-path = (depends on architecture)
+
+; load-default-script-file = yes
+; default-script-file = 
+
+; log-target = auto
+; log-level = notice
+; log-meta = no
+; log-time = no
+; log-backtrace = 0
+
+; resample-method = speex-float-3
+; enable-remixing = yes
+; enable-lfe-remixing = no
+
+; flat-volumes = yes
+
+; rlimit-fsize = -1
+; rlimit-data = -1
+; rlimit-stack = -1
+; rlimit-core = -1
+; rlimit-as = -1
+; rlimit-rss = -1
+; rlimit-nproc = -1
+; rlimit-nofile = 256
+; rlimit-memlock = -1
+; rlimit-locks = -1
+; rlimit-sigpending = -1
+; rlimit-msgqueue = -1
+; rlimit-nice = 31
+; rlimit-rtprio = 9
+; rlimit-rttime = 1000000
+
+; default-sample-format = s16le
+; default-sample-rate = 44100
+; default-sample-channels = 2
+; default-channel-map = front-left,front-right
+
+; default-fragments = 4
+; default-fragment-size-msec = 25

diff --git a/config-archive/etc/pulse/daemon.conf.dist b/config-archive/etc/pulse/daemon.conf.dist
new file mode 100644 (file)
index 0000000..ac69dcc
--- /dev/null
+++ b/config-archive/etc/pulse/daemon.conf.dist
@@ -0,0 +1,86 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA.
+
+## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
+## more information. Default values are commented out.  Use either ; or # for
+## commenting.
+
+; daemonize = no
+; fail = yes
+; allow-module-loading = yes
+; allow-exit = yes
+; use-pid-file = yes
+; system-instance = no
+; local-server-type = user
+; enable-shm = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+; lock-memory = no
+; cpu-limit = no
+
+; high-priority = yes
+; nice-level = -11
+
+; realtime-scheduling = yes
+; realtime-priority = 5
+
+; exit-idle-time = 20
+; scache-idle-time = 20
+
+; dl-search-path = (depends on architecture)
+
+; load-default-script-file = yes
+; default-script-file = /etc/pulse/default.pa
+
+; log-target = auto
+; log-level = notice
+; log-meta = no
+; log-time = no
+; log-backtrace = 0
+
+; resample-method = speex-float-3
+; enable-remixing = yes
+; enable-lfe-remixing = no
+
+; flat-volumes = yes
+
+; rlimit-fsize = -1
+; rlimit-data = -1
+; rlimit-stack = -1
+; rlimit-core = -1
+; rlimit-as = -1
+; rlimit-rss = -1
+; rlimit-nproc = -1
+; rlimit-nofile = 256
+; rlimit-memlock = -1
+; rlimit-locks = -1
+; rlimit-sigpending = -1
+; rlimit-msgqueue = -1
+; rlimit-nice = 31
+; rlimit-rtprio = 9
+; rlimit-rttime = 1000000
+
+; default-sample-format = s16le
+; default-sample-rate = 44100
+; default-sample-channels = 2
+; default-channel-map = front-left,front-right
+
+; default-fragments = 4
+; default-fragment-size-msec = 25
+
+; enable-deferred-volume = yes
+; deferred-volume-safety-margin-usec = 8000
+; deferred-volume-extra-delay-usec = 0

diff --git a/config-archive/etc/pulse/default.pa b/config-archive/etc/pulse/default.pa
new file mode 100644 (file)
index 0000000..ea8956e
--- /dev/null
+++ b/config-archive/etc/pulse/default.pa
@@ -0,0 +1,137 @@
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+# This startup script is used only if PulseAudio is started per-user
+# (i.e. not in system mode)
+
+.nofail
+
+### Load something into the sample cache
+#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
+#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
+#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
+#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
+
+.fail
+
+### Automatically restore the volume of streams and devices
+load-module module-device-restore
+load-module module-stream-restore
+load-module module-card-restore
+
+### Automatically augment property information from .desktop files
+### stored in /usr/share/application
+load-module module-augment-properties
+
+### Load audio drivers statically (it's probably better to not load
+### these drivers manually, but instead use module-hal-detect --
+### see below -- for doing this automatically)
+#load-module module-alsa-sink
+#load-module module-alsa-source device=hw:1,0
+#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
+#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
+#load-module module-null-sink
+#load-module module-pipe-sink
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect
+.else
+### Alternatively use the static hardware detection module (for systems that
+### lack udev support)
+load-module module-detect
+.endif
+
+### Automatically load driver modules for Bluetooth hardware
+.ifexists module-bluetooth-discover.so
+load-module module-bluetooth-discover
+.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+### Network access (may be configured with paprefs, so leave this commented
+### here if you plan to use paprefs)
+#load-module module-esound-protocol-tcp
+#load-module module-native-protocol-tcp
+load-module module-zeroconf-publish
+
+### Load the RTP reciever module (also configured via paprefs, see above)
+#load-module module-rtp-recv
+
+### Load the RTP sender module (also configured via paprefs, see above)
+#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
+#load-module module-rtp-send source=rtp.monitor
+
+### Load additional modules from GConf settings. This can be configured with the paprefs tool.
+### Please keep in mind that the modules configured by paprefs might conflict with manually
+### loaded modules.
+.ifexists module-gconf.so
+.nofail
+load-module module-gconf
+.fail
+.endif
+
+### Automatically restore the default sink/source when changed by the user during runtime
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Honour intended role device property
+load-module module-intended-roles
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### If autoexit on idle is enabled we want to make sure we only quit
+### when no local session needs us anymore.
+load-module module-console-kit
+
+### Enable positioned event sounds
+load-module module-position-event-sounds
+
+### Cork music streams when a phone stream is active
+load-module module-cork-music-on-phone
+
+# X11 modules should not be started from default.pa so that one daemon
+# can be shared by multiple sessions.
+
+### Load X11 bell module
+#load-module module-x11-bell sample=bell-windowing-system
+
+### Register ourselves in the X11 session manager
+#load-module module-x11-xsmp
+
+### Publish connection data in the X11 root window
+#.ifexists module-x11-publish.so
+#.nofail
+#load-module module-x11-publish
+#.fail
+#.endif
+
+### Make some devices default
+#set-default-sink output
+#set-default-source input

diff --git a/config-archive/etc/pulse/default.pa.dist b/config-archive/etc/pulse/default.pa.dist
new file mode 100644 (file)
index 0000000..79cf27b
--- /dev/null
+++ b/config-archive/etc/pulse/default.pa.dist
@@ -0,0 +1,158 @@
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+# This startup script is used only if PulseAudio is started per-user
+# (i.e. not in system mode)
+
+.nofail
+
+### Load something into the sample cache
+#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
+#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
+#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
+#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
+
+.fail
+
+### Automatically restore the volume of streams and devices
+load-module module-device-restore
+load-module module-stream-restore
+load-module module-card-restore
+
+### Automatically augment property information from .desktop files
+### stored in /usr/share/application
+load-module module-augment-properties
+
+### Load audio drivers statically
+### (it's probably better to not load these drivers manually, but instead
+### use module-udev-detect -- see below -- for doing this automatically)
+#load-module module-alsa-sink
+#load-module module-alsa-source device=hw:1,0
+#load-module module-null-sink
+#load-module module-pipe-sink
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect
+.else
+### Use the static hardware detection module (for systems that lack udev/hal support)
+load-module module-detect
+.endif
+
+### Automatically connect sink and source if JACK server is present
+.ifexists module-jackdbus-detect.so
+.nofail
+load-module module-jackdbus-detect
+.fail
+.endif
+
+### Automatically load driver modules for Bluetooth hardware
+.ifexists module-bluetooth-discover.so
+load-module module-bluetooth-discover
+.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+### Network access (may be configured with paprefs, so leave this commented
+### here if you plan to use paprefs)
+#load-module module-esound-protocol-tcp
+#load-module module-native-protocol-tcp
+load-module module-zeroconf-publish
+
+### Load the RTP receiver module (also configured via paprefs, see above)
+#load-module module-rtp-recv
+
+### Load the RTP sender module (also configured via paprefs, see above)
+#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
+#load-module module-rtp-send source=rtp.monitor
+
+### Load additional modules from GConf settings. This can be configured with the paprefs tool.
+### Please keep in mind that the modules configured by paprefs might conflict with manually
+### loaded modules.
+.ifexists module-gconf.so
+.nofail
+load-module module-gconf
+.fail
+.endif
+
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Honour intended role device property
+load-module module-intended-roles
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### If autoexit on idle is enabled we want to make sure we only quit
+### when no local session needs us anymore.
+.ifexists module-console-kit.so
+load-module module-console-kit
+.endif
+
+### Enable positioned event sounds
+load-module module-position-event-sounds
+
+### Cork music streams when a phone stream is active
+load-module module-cork-music-on-phone
+
+### Modules to allow autoloading of filters (such as echo cancellation)
+### on demand. module-filter-heuristics tries to determine what filters
+### make sense, and module-filter-apply does the heavy-lifting of
+### loading modules and rerouting streams.
+load-module module-filter-heuristics
+load-module module-filter-apply
+
+### Load DBus protocol
+.ifexists module-dbus-protocol.so
+load-module module-dbus-protocol
+.endif
+
+# X11 modules should not be started from default.pa so that one daemon
+# can be shared by multiple sessions.
+
+### Load X11 bell module
+#load-module module-x11-bell sample=bell-windowing-system
+
+### Register ourselves in the X11 session manager
+#load-module module-x11-xsmp
+
+### Publish connection data in the X11 root window
+#.ifexists module-x11-publish.so
+#.nofail
+#load-module module-x11-publish
+#.fail
+#.endif
+
+### Make some devices default
+#set-default-sink output
+#set-default-source input

diff --git a/config-archive/etc/pulse/system.pa b/config-archive/etc/pulse/system.pa
new file mode 100644 (file)
index 0000000..23a9857
--- /dev/null
+++ b/config-archive/etc/pulse/system.pa
@@ -0,0 +1,55 @@
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+# This startup script is used only if PulseAudio is started in system
+# mode.
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-hal-detect.so
+load-module module-hal-detect
+.else
+### Alternatively use the static hardware detection module (for systems that
+### lack HAL support)
+load-module module-detect
+.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+### Automatically restore the volume of streams and devices
+load-module module-stream-restore
+load-module module-device-restore
+
+### Automatically restore the default sink/source when changed by the user during runtime
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### Enable positioned event sounds
+load-module module-position-event-sounds

diff --git a/config-archive/etc/pulse/system.pa.dist b/config-archive/etc/pulse/system.pa.dist
new file mode 100644 (file)
index 0000000..e389e05
--- /dev/null
+++ b/config-archive/etc/pulse/system.pa.dist
@@ -0,0 +1,62 @@
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+# This startup script is used only if PulseAudio is started in system
+# mode.
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect
+.else
+### Use the static hardware detection module (for systems that lack udev/hal support)
+load-module module-detect
+.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+### Automatically restore the volume of streams and devices
+load-module module-stream-restore
+load-module module-device-restore
+
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
+load-module module-default-device-restore
+
+.ifexists module-dbus-protocol.so
+### If you want to allow TCP connections, set access to "remote" or "local,remote".
+load-module module-dbus-protocol access=local
+.endif
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### Enable positioned event sounds
+load-module module-position-event-sounds

diff --git a/config-archive/etc/xdg/autostart/pulseaudio.desktop b/config-archive/etc/xdg/autostart/pulseaudio.desktop
new file mode 100644 (file)
index 0000000..a3d14fd
--- /dev/null
+++ b/config-archive/etc/xdg/autostart/pulseaudio.desktop
@@ -0,0 +1,12 @@
+[Desktop Entry]
+Version=1.0
+Encoding=UTF-8
+Name=PulseAudio Sound System
+Name[de]=PulseAudio Sound System
+Comment=Start the PulseAudio Sound System
+Comment[de]=Das PulseAudio Sound System starten
+Exec=start-pulseaudio-x11
+Terminal=false
+Type=Application
+Categories=
+GenericName=

diff --git a/config-archive/etc/xdg/autostart/pulseaudio.desktop.dist b/config-archive/etc/xdg/autostart/pulseaudio.desktop.dist
new file mode 100644 (file)
index 0000000..a627175
--- /dev/null
+++ b/config-archive/etc/xdg/autostart/pulseaudio.desktop.dist
@@ -0,0 +1,14 @@
+[Desktop Entry]
+Version=1.0
+Encoding=UTF-8
+Name=PulseAudio Sound System
+Name[de]=PulseAudio Sound System
+Name[ru]=Звуковая система PulseAudio
+Comment=Start the PulseAudio Sound System
+Comment[de]=Das PulseAudio Sound System starten
+Comment[ru]=Запуск звуковой системы PulseAudio
+Exec=start-pulseaudio-x11
+Terminal=false
+Type=Application
+Categories=
+GenericName=

diff --git a/motd b/motd
index 5b1fdb0e563601f547168ff5041f3fce9f53fc51..97cad75621116d09c80826a3679ff146c84bf078 100644 (file)
--- a/motd
+++ b/motd
@@ -7,11 +7,8 @@ Gentoo Base System release 2.0.3
 |____/ \__,_|_| |_| |_|\__,_|_|  \__,_|
                                        
 
-"Aus Ihren Handlinien lese ich Schreckliches," flüstert die Wahrsagerin.
-"Es wird ein böses Ende mit Ihnen nehmen, man wird Sie töten, kochen und
-auffressen."
-"Moment," unterbricht sie der Kunde: "Lassen Sie mich doch erst die
-Schweinslederhandschuhe ausziehen!"
+Je weicher die Wahrheit, desto steifer der Standpunkt.
+               -- Stanislaw Jerzy Lec (eig. S. J. de Tusch-Letz)
 
 Today is St. Tib’s Day in the YOLD 3178
 

diff --git a/pulse/._cfg0000_client.conf b/pulse/._cfg0000_client.conf
deleted file mode 100644 (file)
index 342395d..0000000
--- a/pulse/._cfg0000_client.conf
+++ /dev/null
@@ -1,37 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA.
-
-## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
-## more information. Default values are commented out.  Use either ; or # for
-## commenting.
-
-; default-sink =
-; default-source =
-; default-server =
-; default-dbus-server =
-
-; autospawn = yes
-; daemon-binary = /usr/bin/pulseaudio
-; extra-arguments = --log-target=syslog
-
-; cookie-file =
-
-; enable-shm = yes
-; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
-
-; auto-connect-localhost = no
-; auto-connect-display = no

diff --git a/pulse/._cfg0000_daemon.conf b/pulse/._cfg0000_daemon.conf
deleted file mode 100644 (file)
index ac69dcc..0000000
--- a/pulse/._cfg0000_daemon.conf
+++ /dev/null
@@ -1,86 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA.
-
-## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
-## more information. Default values are commented out.  Use either ; or # for
-## commenting.
-
-; daemonize = no
-; fail = yes
-; allow-module-loading = yes
-; allow-exit = yes
-; use-pid-file = yes
-; system-instance = no
-; local-server-type = user
-; enable-shm = yes
-; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
-; lock-memory = no
-; cpu-limit = no
-
-; high-priority = yes
-; nice-level = -11
-
-; realtime-scheduling = yes
-; realtime-priority = 5
-
-; exit-idle-time = 20
-; scache-idle-time = 20
-
-; dl-search-path = (depends on architecture)
-
-; load-default-script-file = yes
-; default-script-file = /etc/pulse/default.pa
-
-; log-target = auto
-; log-level = notice
-; log-meta = no
-; log-time = no
-; log-backtrace = 0
-
-; resample-method = speex-float-3
-; enable-remixing = yes
-; enable-lfe-remixing = no
-
-; flat-volumes = yes
-
-; rlimit-fsize = -1
-; rlimit-data = -1
-; rlimit-stack = -1
-; rlimit-core = -1
-; rlimit-as = -1
-; rlimit-rss = -1
-; rlimit-nproc = -1
-; rlimit-nofile = 256
-; rlimit-memlock = -1
-; rlimit-locks = -1
-; rlimit-sigpending = -1
-; rlimit-msgqueue = -1
-; rlimit-nice = 31
-; rlimit-rtprio = 9
-; rlimit-rttime = 1000000
-
-; default-sample-format = s16le
-; default-sample-rate = 44100
-; default-sample-channels = 2
-; default-channel-map = front-left,front-right
-
-; default-fragments = 4
-; default-fragment-size-msec = 25
-
-; enable-deferred-volume = yes
-; deferred-volume-safety-margin-usec = 8000
-; deferred-volume-extra-delay-usec = 0

diff --git a/pulse/._cfg0000_default.pa b/pulse/._cfg0000_default.pa
deleted file mode 100644 (file)
index 79cf27b..0000000
--- a/pulse/._cfg0000_default.pa
+++ /dev/null
@@ -1,158 +0,0 @@
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started per-user
-# (i.e. not in system mode)
-
-.nofail
-
-### Load something into the sample cache
-#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
-#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
-
-.fail
-
-### Automatically restore the volume of streams and devices
-load-module module-device-restore
-load-module module-stream-restore
-load-module module-card-restore
-
-### Automatically augment property information from .desktop files
-### stored in /usr/share/application
-load-module module-augment-properties
-
-### Load audio drivers statically
-### (it's probably better to not load these drivers manually, but instead
-### use module-udev-detect -- see below -- for doing this automatically)
-#load-module module-alsa-sink
-#load-module module-alsa-source device=hw:1,0
-#load-module module-null-sink
-#load-module module-pipe-sink
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-udev-detect.so
-load-module module-udev-detect
-.else
-### Use the static hardware detection module (for systems that lack udev/hal support)
-load-module module-detect
-.endif
-
-### Automatically connect sink and source if JACK server is present
-.ifexists module-jackdbus-detect.so
-.nofail
-load-module module-jackdbus-detect
-.fail
-.endif
-
-### Automatically load driver modules for Bluetooth hardware
-.ifexists module-bluetooth-discover.so
-load-module module-bluetooth-discover
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Network access (may be configured with paprefs, so leave this commented
-### here if you plan to use paprefs)
-#load-module module-esound-protocol-tcp
-#load-module module-native-protocol-tcp
-load-module module-zeroconf-publish
-
-### Load the RTP receiver module (also configured via paprefs, see above)
-#load-module module-rtp-recv
-
-### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
-#load-module module-rtp-send source=rtp.monitor
-
-### Load additional modules from GConf settings. This can be configured with the paprefs tool.
-### Please keep in mind that the modules configured by paprefs might conflict with manually
-### loaded modules.
-.ifexists module-gconf.so
-.nofail
-load-module module-gconf
-.fail
-.endif
-
-### Automatically restore the default sink/source when changed by the user
-### during runtime
-### NOTE: This should be loaded as early as possible so that subsequent modules
-### that look up the default sink/source get the right value
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Honour intended role device property
-load-module module-intended-roles
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### If autoexit on idle is enabled we want to make sure we only quit
-### when no local session needs us anymore.
-.ifexists module-console-kit.so
-load-module module-console-kit
-.endif
-
-### Enable positioned event sounds
-load-module module-position-event-sounds
-
-### Cork music streams when a phone stream is active
-load-module module-cork-music-on-phone
-
-### Modules to allow autoloading of filters (such as echo cancellation)
-### on demand. module-filter-heuristics tries to determine what filters
-### make sense, and module-filter-apply does the heavy-lifting of
-### loading modules and rerouting streams.
-load-module module-filter-heuristics
-load-module module-filter-apply
-
-### Load DBus protocol
-.ifexists module-dbus-protocol.so
-load-module module-dbus-protocol
-.endif
-
-# X11 modules should not be started from default.pa so that one daemon
-# can be shared by multiple sessions.
-
-### Load X11 bell module
-#load-module module-x11-bell sample=bell-windowing-system
-
-### Register ourselves in the X11 session manager
-#load-module module-x11-xsmp
-
-### Publish connection data in the X11 root window
-#.ifexists module-x11-publish.so
-#.nofail
-#load-module module-x11-publish
-#.fail
-#.endif
-
-### Make some devices default
-#set-default-sink output
-#set-default-source input

diff --git a/pulse/._cfg0000_system.pa b/pulse/._cfg0000_system.pa
deleted file mode 100644 (file)
index e389e05..0000000
--- a/pulse/._cfg0000_system.pa
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started in system
-# mode.
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-udev-detect.so
-load-module module-udev-detect
-.else
-### Use the static hardware detection module (for systems that lack udev/hal support)
-load-module module-detect
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Automatically restore the volume of streams and devices
-load-module module-stream-restore
-load-module module-device-restore
-
-### Automatically restore the default sink/source when changed by the user
-### during runtime
-### NOTE: This should be loaded as early as possible so that subsequent modules
-### that look up the default sink/source get the right value
-load-module module-default-device-restore
-
-.ifexists module-dbus-protocol.so
-### If you want to allow TCP connections, set access to "remote" or "local,remote".
-load-module module-dbus-protocol access=local
-.endif
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### Enable positioned event sounds
-load-module module-position-event-sounds

diff --git a/pulse/client.conf b/pulse/client.conf
index b3738abf2d78128cfdae209366cf20cc0060707c..342395d5be91eb221f3d823fc7f758ac3d215967 100644 (file)
--- a/pulse/client.conf
+++ b/pulse/client.conf
@@ -16,12 +16,13 @@
 # USA.
 
 ## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
-## more information. Default values a commented out.  Use either ; or # for
+## more information. Default values are commented out.  Use either ; or # for
 ## commenting.
 
 ; default-sink =
 ; default-source =
 ; default-server =
+; default-dbus-server =
 
 ; autospawn = yes
 ; daemon-binary = /usr/bin/pulseaudio
@@ -31,3 +32,6 @@
 
 ; enable-shm = yes
 ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+
+; auto-connect-localhost = no
+; auto-connect-display = no

diff --git a/pulse/daemon.conf b/pulse/daemon.conf
index e058f497591761ffe99470b5c8b9d679ac2ea1ad..ac69dccb322b8128a8dc98a465b86789e9bf647c 100644 (file)
--- a/pulse/daemon.conf
+++ b/pulse/daemon.conf
@@ -16,7 +16,7 @@
 # USA.
 
 ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
-## more information. Default values a commented out.  Use either ; or # for
+## more information. Default values are commented out.  Use either ; or # for
 ## commenting.
 
 ; daemonize = no
@@ -25,6 +25,7 @@
 ; allow-exit = yes
 ; use-pid-file = yes
 ; system-instance = no
+; local-server-type = user
 ; enable-shm = yes
 ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
 ; lock-memory = no
@@ -42,7 +43,7 @@
 ; dl-search-path = (depends on architecture)
 
 ; load-default-script-file = yes
-; default-script-file = 
+; default-script-file = /etc/pulse/default.pa
 
 ; log-target = auto
 ; log-level = notice
@@ -79,3 +80,7 @@
 
 ; default-fragments = 4
 ; default-fragment-size-msec = 25
+
+; enable-deferred-volume = yes
+; deferred-volume-safety-margin-usec = 8000
+; deferred-volume-extra-delay-usec = 0

diff --git a/pulse/default.pa b/pulse/default.pa
index ea8956e2b7cfc7980f18278997e1c56225d3a0cd..79cf27b24bc59d7ae1277b142a4976c640491bdc 100644 (file)
--- a/pulse/default.pa
+++ b/pulse/default.pa
@@ -38,13 +38,11 @@ load-module module-card-restore
 ### stored in /usr/share/application
 load-module module-augment-properties
 
-### Load audio drivers statically (it's probably better to not load
-### these drivers manually, but instead use module-hal-detect --
-### see below -- for doing this automatically)
+### Load audio drivers statically
+### (it's probably better to not load these drivers manually, but instead
+### use module-udev-detect -- see below -- for doing this automatically)
 #load-module module-alsa-sink
 #load-module module-alsa-source device=hw:1,0
-#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
-#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
 #load-module module-null-sink
 #load-module module-pipe-sink
 
@@ -52,11 +50,17 @@ load-module module-augment-properties
 .ifexists module-udev-detect.so
 load-module module-udev-detect
 .else
-### Alternatively use the static hardware detection module (for systems that
-### lack udev support)
+### Use the static hardware detection module (for systems that lack udev/hal support)
 load-module module-detect
 .endif
 
+### Automatically connect sink and source if JACK server is present
+.ifexists module-jackdbus-detect.so
+.nofail
+load-module module-jackdbus-detect
+.fail
+.endif
+
 ### Automatically load driver modules for Bluetooth hardware
 .ifexists module-bluetooth-discover.so
 load-module module-bluetooth-discover
@@ -74,11 +78,11 @@ load-module module-native-protocol-unix
 #load-module module-native-protocol-tcp
 load-module module-zeroconf-publish
 
-### Load the RTP reciever module (also configured via paprefs, see above)
+### Load the RTP receiver module (also configured via paprefs, see above)
 #load-module module-rtp-recv
 
 ### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
+#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
 #load-module module-rtp-send source=rtp.monitor
 
 ### Load additional modules from GConf settings. This can be configured with the paprefs tool.
@@ -90,7 +94,10 @@ load-module module-gconf
 .fail
 .endif
 
-### Automatically restore the default sink/source when changed by the user during runtime
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
 load-module module-default-device-restore
 
 ### Automatically move streams to the default sink if the sink they are
@@ -108,7 +115,9 @@ load-module module-suspend-on-idle
 
 ### If autoexit on idle is enabled we want to make sure we only quit
 ### when no local session needs us anymore.
+.ifexists module-console-kit.so
 load-module module-console-kit
+.endif
 
 ### Enable positioned event sounds
 load-module module-position-event-sounds
@@ -116,6 +125,18 @@ load-module module-position-event-sounds
 ### Cork music streams when a phone stream is active
 load-module module-cork-music-on-phone
 
+### Modules to allow autoloading of filters (such as echo cancellation)
+### on demand. module-filter-heuristics tries to determine what filters
+### make sense, and module-filter-apply does the heavy-lifting of
+### loading modules and rerouting streams.
+load-module module-filter-heuristics
+load-module module-filter-apply
+
+### Load DBus protocol
+.ifexists module-dbus-protocol.so
+load-module module-dbus-protocol
+.endif
+
 # X11 modules should not be started from default.pa so that one daemon
 # can be shared by multiple sessions.
 

diff --git a/pulse/system.pa b/pulse/system.pa
index 23a9857ae44a043250f6f778dd88b20b3e1ac0ab..e389e0582f4a1aa42dd7cd4f3af19ccd7d7151f0 100644 (file)
--- a/pulse/system.pa
+++ b/pulse/system.pa
@@ -20,11 +20,10 @@
 # mode.
 
 ### Automatically load driver modules depending on the hardware available
-.ifexists module-hal-detect.so
-load-module module-hal-detect
+.ifexists module-udev-detect.so
+load-module module-udev-detect
 .else
-### Alternatively use the static hardware detection module (for systems that
-### lack HAL support)
+### Use the static hardware detection module (for systems that lack udev/hal support)
 load-module module-detect
 .endif
 
@@ -38,9 +37,17 @@ load-module module-native-protocol-unix
 load-module module-stream-restore
 load-module module-device-restore
 
-### Automatically restore the default sink/source when changed by the user during runtime
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
 load-module module-default-device-restore
 
+.ifexists module-dbus-protocol.so
+### If you want to allow TCP connections, set access to "remote" or "local,remote".
+load-module module-dbus-protocol access=local
+.endif
+
 ### Automatically move streams to the default sink if the sink they are
 ### connected to dies, similar for sources
 load-module module-rescue-streams

diff --git a/xdg/autostart/._cfg0000_pulseaudio.desktop b/xdg/autostart/._cfg0000_pulseaudio.desktop
deleted file mode 100644 (file)
index a627175..0000000
--- a/xdg/autostart/._cfg0000_pulseaudio.desktop
+++ /dev/null
@@ -1,14 +0,0 @@
-[Desktop Entry]
-Version=1.0
-Encoding=UTF-8
-Name=PulseAudio Sound System
-Name[de]=PulseAudio Sound System
-Name[ru]=Звуковая система PulseAudio
-Comment=Start the PulseAudio Sound System
-Comment[de]=Das PulseAudio Sound System starten
-Comment[ru]=Запуск звуковой системы PulseAudio
-Exec=start-pulseaudio-x11
-Terminal=false
-Type=Application
-Categories=
-GenericName=

diff --git a/xdg/autostart/pulseaudio.desktop b/xdg/autostart/pulseaudio.desktop
index a3d14fd2ab2952d60fb0b02d71aa507e1ddba603..a627175e8470ee4b77167a686578583184b0bcb9 100644 (file)
--- a/xdg/autostart/pulseaudio.desktop
+++ b/xdg/autostart/pulseaudio.desktop
@@ -3,8 +3,10 @@ Version=1.0
 Encoding=UTF-8
 Name=PulseAudio Sound System
 Name[de]=PulseAudio Sound System
+Name[ru]=Звуковая система PulseAudio
 Comment=Start the PulseAudio Sound System
 Comment[de]=Das PulseAudio Sound System starten
+Comment[ru]=Запуск звуковой системы PulseAudio
 Exec=start-pulseaudio-x11
 Terminal=false
 Type=Application