mkdir -p './dpkg/dpkg.cfg.d'
mkdir -p './foomatic/direct'
mkdir -p './gnome-settings-daemon/xrandr'
-mkdir -p './php/cgi-php5.3/ext'
-mkdir -p './php/cgi-php5.3/ext-active'
mkdir -p './php/cgi-php5.4/ext'
mkdir -p './php/cgi-php5.4/ext-active'
-mkdir -p './php/cli-php5.3/ext'
-mkdir -p './php/cli-php5.3/ext-active'
mkdir -p './php/cli-php5.4/ext'
mkdir -p './php/cli-php5.4/ext-active'
-mkdir -p './php/embed-php5.3/ext'
-mkdir -p './php/embed-php5.3/ext-active'
mkdir -p './php/embed-php5.4/ext'
mkdir -p './php/embed-php5.4/ext-active'
-mkdir -p './php/fpm-php5.3/ext'
-mkdir -p './php/fpm-php5.3/ext-active'
mkdir -p './php/fpm-php5.4/ext'
mkdir -p './php/fpm-php5.4/ext-active'
mkdir -p './pm/power.d'
maybe chmod 0644 './dbus-1/system.d/nm-dhcp-client.conf'
maybe chmod 0644 './dbus-1/system.d/nm-dispatcher.conf'
maybe chmod 0644 './dbus-1/system.d/org.freedesktop.ColorManager.conf'
-maybe chmod 0644 './dbus-1/system.d/org.freedesktop.ModemManager.conf'
maybe chmod 0644 './dbus-1/system.d/org.freedesktop.NetworkManager.conf'
maybe chmod 0644 './dbus-1/system.d/org.freedesktop.PolicyKit1.conf'
maybe chmod 0644 './dbus-1/system.d/org.freedesktop.UDisks.conf'
maybe chmod 0644 './env.d/10rubygems'
maybe chmod 0644 './env.d/20ant'
maybe chmod 0644 './env.d/20java-config'
-maybe chmod 0644 './env.d/20php5.3'
maybe chmod 0644 './env.d/20php5.4'
maybe chmod 0644 './env.d/22javacc'
maybe chmod 0644 './env.d/30gnupg'
maybe chmod 0644 './passwd'
maybe chmod 0600 './passwd-'
maybe chmod 0755 './php'
-maybe chmod 0755 './php/cgi-php5.3'
-maybe chmod 0755 './php/cgi-php5.3/ext'
-maybe chmod 0755 './php/cgi-php5.3/ext-active'
-maybe chmod 0644 './php/cgi-php5.3/php.ini'
maybe chmod 0755 './php/cgi-php5.4'
maybe chmod 0755 './php/cgi-php5.4/ext'
maybe chmod 0755 './php/cgi-php5.4/ext-active'
maybe chmod 0644 './php/cgi-php5.4/php.ini'
-maybe chmod 0755 './php/cli-php5.3'
-maybe chmod 0755 './php/cli-php5.3/ext'
-maybe chmod 0755 './php/cli-php5.3/ext-active'
-maybe chmod 0644 './php/cli-php5.3/php.ini'
maybe chmod 0755 './php/cli-php5.4'
maybe chmod 0755 './php/cli-php5.4/ext'
maybe chmod 0755 './php/cli-php5.4/ext-active'
maybe chmod 0644 './php/cli-php5.4/php.ini'
-maybe chmod 0755 './php/embed-php5.3'
-maybe chmod 0755 './php/embed-php5.3/ext'
-maybe chmod 0755 './php/embed-php5.3/ext-active'
-maybe chmod 0644 './php/embed-php5.3/php.ini'
maybe chmod 0755 './php/embed-php5.4'
maybe chmod 0755 './php/embed-php5.4/ext'
maybe chmod 0755 './php/embed-php5.4/ext-active'
maybe chmod 0644 './php/embed-php5.4/php.ini'
-maybe chmod 0755 './php/fpm-php5.3'
-maybe chmod 0755 './php/fpm-php5.3/ext'
-maybe chmod 0755 './php/fpm-php5.3/ext-active'
-maybe chmod 0644 './php/fpm-php5.3/php-fpm.conf'
-maybe chmod 0644 './php/fpm-php5.3/php.ini'
maybe chmod 0755 './php/fpm-php5.4'
maybe chmod 0755 './php/fpm-php5.4/ext'
maybe chmod 0755 './php/fpm-php5.4/ext-active'
maybe chmod 0644 './udev/rules.d/.keep_sys-fs_udev-0'
maybe chmod 0644 './udev/rules.d/70-persistent-cd.rules'
maybe chmod 0644 './udev/rules.d/70-persistent-net.rules'
-maybe chmod 0644 './udev/rules.d/77-mm-ericsson-mbm.rules'
-maybe chmod 0644 './udev/rules.d/77-mm-longcheer-port-types.rules'
-maybe chmod 0644 './udev/rules.d/77-mm-pcmcia-device-blacklist.rules'
-maybe chmod 0644 './udev/rules.d/77-mm-platform-serial-whitelist.rules'
-maybe chmod 0644 './udev/rules.d/77-mm-simtech-port-types.rules'
-maybe chmod 0644 './udev/rules.d/77-mm-usb-device-blacklist.rules'
-maybe chmod 0644 './udev/rules.d/77-mm-zte-port-types.rules'
maybe chmod 0644 './udev/udev.conf'
maybe chmod 0600 './ulogd.conf'
maybe chmod 0755 './unixODBC'
setenv ANT_HOME '/usr/share/ant'
setenv CONFIG_PROTECT '/usr/share/gnupg/qualified.txt /var/lib/hsqldb /usr/share/config /usr/share/openvpn/easy-rsa'
-setenv CONFIG_PROTECT_MASK '/etc/gentoo-release /etc/sandbox.d /etc/env.d/java/ /etc/php/cli-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/apache2-php5.3/ext-active/ /etc/php/cli-php5.4/ext-active/ /etc/php/cgi-php5.4/ext-active/ /etc/php/apache2-php5.4/ext-active/ /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
+setenv CONFIG_PROTECT_MASK '/etc/gentoo-release /etc/sandbox.d /etc/env.d/java/ /etc/php/cli-php5.4/ext-active/ /etc/php/cgi-php5.4/ext-active/ /etc/php/apache2-php5.4/ext-active/ /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
setenv EDITOR '/usr/bin/vi'
setenv FLTK_DOCDIR '/usr/share/doc/fltk-1.3.0-r1/html'
setenv GCC_SPECS ''
setenv LESS '-R -M --shift 5'
setenv LESSOPEN '|lesspipe %s'
setenv LIBBLURAY_CP '/usr/share/libbluray/lib/libbluray.jar'
-setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man:/etc/java-config/system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.1/man/'
+setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man:/etc/java-config/system-vm/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.1/man/'
setenv OPENGL_PROFILE 'xorg-x11'
setenv PATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.4:/usr/lib64/subversion/bin:/usr/games/bin'
setenv PRELINK_PATH_MASK '/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so'
+++ /dev/null
-<!DOCTYPE busconfig PUBLIC
- "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
- "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
-<busconfig>
- <policy context="default">
- <deny send_destination="org.freedesktop.ModemManager"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.DBus.Introspectable"/>
-
- <!-- Methods listed here are explicitly allowed or PolicyKit protected.
- The rest are restricted to root for security.
- -->
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager"
- send_member="EnumerateDevices"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.DBus.Properties"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem"
- send_member="GetInfo"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Cdma"
- send_member="GetSignalQuality"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Cdma"
- send_member="GetServingSystem"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Cdma"
- send_member="GetRegistrationState"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Cdma"
- send_member="GetEsn"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Network"
- send_member="GetSignalQuality"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Network"
- send_member="GetBand"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Network"
- send_member="GetNetworkMode"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Network"
- send_member="GetRegistrationInfo"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Network"
- send_member="Scan"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Card"
- send_member="GetImei"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Card"
- send_member="GetImsi"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Card"
- send_member="SendPuk"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Card"
- send_member="SendPin"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Card"
- send_member="EnablePin"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Card"
- send_member="ChangePin"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Contacts"
- send_member="Add"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Contacts"
- send_member="Delete"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Contacts"
- send_member="Get"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Contacts"
- send_member="List"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Contacts"
- send_member="Find"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.Contacts"
- send_member="GetCount"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.SMS"
- send_member="Delete"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.SMS"
- send_member="Get"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.SMS"
- send_member="List"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.SMS"
- send_member="Save"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.SMS"
- send_member="Send"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.SMS"
- send_member="SendFromStorage"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.SMS"
- send_member="SetIndication"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.SMS"
- send_member="GetSmsc"/>
-
- <allow send_destination="org.freedesktop.ModemManager"
- send_interface="org.freedesktop.ModemManager.Modem.Gsm.SMS"
- send_member="SetSmsc"/>
- </policy>
-
- <policy user="root">
- <allow own="org.freedesktop.ModemManager"/>
- <allow send_destination="org.freedesktop.ModemManager"/>
- </policy>
-
- <limit name="max_replies_per_connection">512</limit>
-</busconfig>
-
+++ /dev/null
-MANPATH="/usr/lib64/php5.3/man/"
-CONFIG_PROTECT_MASK="/etc/php/cli-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/apache2-php5.3/ext-active/"
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 17
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
-zend.enable_gc = On
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL | E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; removed in PHP 5.4.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env =
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publicly accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.conf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[xsl]
-; Write operations from within XSLT are disabled by default.
-; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
-; Set it to 0 to allow all operations
-;xsl.security_prefs = 44
-
-; Local Variables:
-; tab-width: 4
-; End:
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 17
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
-zend.enable_gc = On
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL | E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; removed in PHP 5.4.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env =
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publicly accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.conf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[xsl]
-; Write operations from within XSLT are disabled by default.
-; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
-; Set it to 0 to allow all operations
-;xsl.security_prefs = 44
-
-; Local Variables:
-; tab-width: 4
-; End:
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 17
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
-zend.enable_gc = On
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL | E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; removed in PHP 5.4.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env =
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publicly accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.conf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[xsl]
-; Write operations from within XSLT are disabled by default.
-; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
-; Set it to 0 to allow all operations
-;xsl.security_prefs = 44
-
-; Local Variables:
-; tab-width: 4
-; End:
+++ /dev/null
-;;;;;;;;;;;;;;;;;;;;;
-; FPM Configuration ;
-;;;;;;;;;;;;;;;;;;;;;
-
-; All relative paths in this configuration file are relative to PHP's install
-; prefix (/usr/lib/php5.3). This prefix can be dynamicaly changed by using the
-; '-p' argument from the command line.
-
-; Include one or more files. If glob(3) exists, it is used to include a bunch of
-; files from a glob(3) pattern. This directive can be used everywhere in the
-; file.
-; Relative path can also be used. They will be prefixed by:
-; - the global prefix if it's been set (-p arguement)
-; - /usr/lib/php5.3 otherwise
-;include=/etc/php/fpm-php5.3/fpm.d/*.conf
-
-;;;;;;;;;;;;;;;;;;
-; Global Options ;
-;;;;;;;;;;;;;;;;;;
-
-[global]
-; Pid file
-; Note: the default prefix is /var/lib
-; Default Value: none
-; Warning: pid file is overriden by the Gentoo init script.
-; FPM will refuse to start if you uncomment this settingi and make use of the
-; init script.
-; pid = /var/run/php-fpm.pid
-
-; Error log file
-; Note: the default prefix is /var/lib
-; Default Value: log/php-fpm.log
-error_log = /var/log/php-fpm.log
-
-; Log level
-; Possible Values: alert, error, warning, notice, debug
-; Default Value: notice
-;log_level = notice
-
-; If this number of child processes exit with SIGSEGV or SIGBUS within the time
-; interval set by emergency_restart_interval then FPM will restart. A value
-; of '0' means 'Off'.
-; Default Value: 0
-;emergency_restart_threshold = 0
-
-; Interval of time used by emergency_restart_interval to determine when
-; a graceful restart will be initiated. This can be useful to work around
-; accidental corruptions in an accelerator's shared memory.
-; Available Units: s(econds), m(inutes), h(ours), or d(ays)
-; Default Unit: seconds
-; Default Value: 0
-;emergency_restart_interval = 0
-
-; Time limit for child processes to wait for a reaction on signals from master.
-; Available units: s(econds), m(inutes), h(ours), or d(ays)
-; Default Unit: seconds
-; Default Value: 0
-;process_control_timeout = 0
-
-; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
-; Default Value: yes
-;daemonize = yes
-
-;;;;;;;;;;;;;;;;;;;;
-; Pool Definitions ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Multiple pools of child processes may be started with different listening
-; ports and different management options. The name of the pool will be
-; used in logs and stats. There is no limitation on the number of pools which
-; FPM can handle. Your system will tell you anyway :)
-
-; Start a new pool named 'www'.
-; the variable $pool can we used in any directive and will be replaced by the
-; pool name ('www' here)
-[www]
-
-; Per pool prefix
-; It only applies on the following directives:
-; - 'slowlog'
-; - 'listen' (unixsocket)
-; - 'chroot'
-; - 'chdir'
-; - 'php_values'
-; - 'php_admin_values'
-; When not set, the global prefix (or /usr/lib/php5.3) applies instead.
-; Note: This directive can also be relative to the global prefix.
-; Default Value: none
-;prefix = /path/to/pools/$pool
-
-; The address on which to accept FastCGI requests.
-; Valid syntaxes are:
-; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
-; a specific port;
-; 'port' - to listen on a TCP socket to all addresses on a
-; specific port;
-; '/path/to/unix/socket' - to listen on a unix socket.
-; Note: This value is mandatory.
-listen = 127.0.0.1:9000
-
-; Set listen(2) backlog. A value of '-1' means unlimited.
-; Default Value: 128 (-1 on FreeBSD and OpenBSD)
-;listen.backlog = -1
-
-; List of ipv4 addresses of FastCGI clients which are allowed to connect.
-; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
-; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
-; must be separated by a comma. If this value is left blank, connections will be
-; accepted from any ip address.
-; Default Value: any
-;listen.allowed_clients = 127.0.0.1
-
-; Set permissions for unix socket, if one is used. In Linux, read/write
-; permissions must be set in order to allow connections from a web server. Many
-; BSD-derived systems allow connections regardless of permissions.
-; Default Values: user and group are set as the running user
-; mode is set to 0666
-;listen.owner = nobody
-;listen.group = nobody
-;listen.mode = 0666
-
-; Unix user/group of processes
-; Note: The user is mandatory. If the group is not set, the default user's group
-; will be used.
-user = nobody
-group = nobody
-
-; Choose how the process manager will control the number of child processes.
-; Possible Values:
-; static - a fixed number (pm.max_children) of child processes;
-; dynamic - the number of child processes are set dynamically based on the
-; following directives:
-; pm.max_children - the maximum number of children that can
-; be alive at the same time.
-; pm.start_servers - the number of children created on startup.
-; pm.min_spare_servers - the minimum number of children in 'idle'
-; state (waiting to process). If the number
-; of 'idle' processes is less than this
-; number then some children will be created.
-; pm.max_spare_servers - the maximum number of children in 'idle'
-; state (waiting to process). If the number
-; of 'idle' processes is greater than this
-; number then some children will be killed.
-; Note: This value is mandatory.
-pm = dynamic
-
-; The number of child processes to be created when pm is set to 'static' and the
-; maximum number of child processes to be created when pm is set to 'dynamic'.
-; This value sets the limit on the number of simultaneous requests that will be
-; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
-; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
-; CGI.
-; Note: Used when pm is set to either 'static' or 'dynamic'
-; Note: This value is mandatory.
-pm.max_children = 50
-
-; The number of child processes created on startup.
-; Note: Used only when pm is set to 'dynamic'
-; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
-;pm.start_servers = 20
-
-; The desired minimum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.min_spare_servers = 5
-
-; The desired maximum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.max_spare_servers = 35
-
-; The number of requests each child process should execute before respawning.
-; This can be useful to work around memory leaks in 3rd party libraries. For
-; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
-; Default Value: 0
-;pm.max_requests = 500
-
-; The URI to view the FPM status page. If this value is not set, no URI will be
-; recognized as a status page. By default, the status page shows the following
-; information:
-; accepted conn - the number of request accepted by the pool;
-; pool - the name of the pool;
-; process manager - static or dynamic;
-; idle processes - the number of idle processes;
-; active processes - the number of active processes;
-; total processes - the number of idle + active processes.
-; max children reached - number of times, the process limit has been reached,
-; when pm tries to start more children (works only for
-; pm 'dynamic')
-; The values of 'idle processes', 'active processes' and 'total processes' are
-; updated each second. The value of 'accepted conn' is updated in real time.
-; Example output:
-; accepted conn: 12073
-; pool: www
-; process manager: static
-; idle processes: 35
-; active processes: 65
-; total processes: 100
-; max children reached: 1
-; By default the status page output is formatted as text/plain. Passing either
-; 'html' or 'json' as a query string will return the corresponding output
-; syntax. Example:
-; http://www.foo.bar/status
-; http://www.foo.bar/status?json
-; http://www.foo.bar/status?html
-; Note: The value must start with a leading slash (/). The value can be
-; anything, but it may not be a good idea to use the .php extension or it
-; may conflict with a real PHP file.
-; Default Value: not set
-;pm.status_path = /status
-
-; The ping URI to call the monitoring page of FPM. If this value is not set, no
-; URI will be recognized as a ping page. This could be used to test from outside
-; that FPM is alive and responding, or to
-; - create a graph of FPM availability (rrd or such);
-; - remove a server from a group if it is not responding (load balancing);
-; - trigger alerts for the operating team (24/7).
-; Note: The value must start with a leading slash (/). The value can be
-; anything, but it may not be a good idea to use the .php extension or it
-; may conflict with a real PHP file.
-; Default Value: not set
-;ping.path = /ping
-
-; This directive may be used to customize the response of a ping request. The
-; response is formatted as text/plain with a 200 response code.
-; Default Value: pong
-;ping.response = pong
-
-; The timeout for serving a single request after which the worker process will
-; be killed. This option should be used when the 'max_execution_time' ini option
-; does not stop script execution for some reason. A value of '0' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_terminate_timeout = 0
-
-; The timeout for serving a single request after which a PHP backtrace will be
-; dumped to the 'slowlog' file. A value of '0s' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_slowlog_timeout = 0
-
-; The log file for slow requests
-; Default Value: not set
-; Note: slowlog is mandatory if request_slowlog_timeout is set
-;slowlog = /var/log/php-fpm-$pool.log.slow
-
-; Set open file descriptor rlimit.
-; Default Value: system defined value
-;rlimit_files = 1024
-
-; Set max core size rlimit.
-; Possible Values: 'unlimited' or an integer greater or equal to 0
-; Default Value: system defined value
-;rlimit_core = 0
-
-; Chroot to this directory at the start. This value must be defined as an
-; absolute path. When this value is not set, chroot is not used.
-; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
-; of its subdirectories. If the pool prefix is not set, the global prefix
-; will be used instead.
-; Note: chrooting is a great security feature and should be used whenever
-; possible. However, all PHP paths will be relative to the chroot
-; (error_log, sessions.save_path, ...).
-; Default Value: not set
-;chroot =
-
-; Chdir to this directory at the start.
-; Note: relative path can be used.
-; Default Value: current directory or / when chroot
-;chdir = /var/www
-
-; Redirect worker stdout and stderr into main error log. If not set, stdout and
-; stderr will be redirected to /dev/null according to FastCGI specs.
-; Note: on highloaded environement, this can cause some delay in the page
-; process time (several ms).
-; Default Value: no
-;catch_workers_output = yes
-
-; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
-; the current environment.
-; Default Value: clean env
-;env[HOSTNAME] = $HOSTNAME
-;env[PATH] = /usr/local/bin:/usr/bin:/bin
-;env[TMP] = /tmp
-;env[TMPDIR] = /tmp
-;env[TEMP] = /tmp
-
-; Additional php.ini defines, specific to this pool of workers. These settings
-; overwrite the values previously defined in the php.ini. The directives are the
-; same as the PHP SAPI:
-; php_value/php_flag - you can set classic ini defines which can
-; be overwritten from PHP call 'ini_set'.
-; php_admin_value/php_admin_flag - these directives won't be overwritten by
-; PHP call 'ini_set'
-; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
-
-; Defining 'extension' will load the corresponding shared extension from
-; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
-; overwrite previously defined php.ini values, but will append the new value
-; instead.
-
-; Note: path INI options can be relative and will be expanded with the prefix
-; (pool, global or /usr/lib/php5.3)
-
-; Default Value: nothing is defined by default except the values in php.ini and
-; specified at startup with the -d argument
-;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
-;php_flag[display_errors] = off
-;php_admin_value[error_log] = /var/log/fpm-php.www.log
-;php_admin_flag[log_errors] = on
-;php_admin_value[memory_limit] = 32M
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 17
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
-zend.enable_gc = On
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL | E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; removed in PHP 5.4.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env =
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publicly accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.conf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[xsl]
-; Write operations from within XSLT are disabled by default.
-; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
-; Set it to 0 to allow all operations
-;xsl.security_prefs = 44
-
-; Local Variables:
-; tab-width: 4
-; End:
export ANT_HOME='/usr/share/ant'
export CONFIG_PROTECT='/usr/share/gnupg/qualified.txt /var/lib/hsqldb /usr/share/config /usr/share/openvpn/easy-rsa'
-export CONFIG_PROTECT_MASK='/etc/gentoo-release /etc/sandbox.d /etc/env.d/java/ /etc/php/cli-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/apache2-php5.3/ext-active/ /etc/php/cli-php5.4/ext-active/ /etc/php/cgi-php5.4/ext-active/ /etc/php/apache2-php5.4/ext-active/ /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
+export CONFIG_PROTECT_MASK='/etc/gentoo-release /etc/sandbox.d /etc/env.d/java/ /etc/php/cli-php5.4/ext-active/ /etc/php/cgi-php5.4/ext-active/ /etc/php/apache2-php5.4/ext-active/ /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
export EDITOR='/usr/bin/vi'
export FLTK_DOCDIR='/usr/share/doc/fltk-1.3.0-r1/html'
export GCC_SPECS=''
export LESS='-R -M --shift 5'
export LESSOPEN='|lesspipe %s'
export LIBBLURAY_CP='/usr/share/libbluray/lib/libbluray.jar'
-export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man:/etc/java-config/system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.1/man/'
+export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man:/etc/java-config/system-vm/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.1/man/'
export OPENGL_PROFILE='xorg-x11'
export PATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.4:/usr/lib64/subversion/bin:/usr/games/bin'
export PRELINK_PATH_MASK='/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so'
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION!="add|change", GOTO="mm_mbm_end"
-SUBSYSTEM!="usb", GOTO="mm_mbm_end"
-ENV{DEVTYPE}!="usb_device", GOTO="mm_mbm_end"
-
-# Ericsson F3507g
-ATTRS{idVendor}=="0bdb", ATTRS{idProduct}=="1900", ENV{ID_MM_ERICSSON_MBM}="1"
-ATTRS{idVendor}=="0bdb", ATTRS{idProduct}=="1902", ENV{ID_MM_ERICSSON_MBM}="1"
-
-# Ericsson F3607gw
-ATTRS{idVendor}=="0bdb", ATTRS{idProduct}=="1904", ENV{ID_MM_ERICSSON_MBM}="1"
-ATTRS{idVendor}=="0bdb", ATTRS{idProduct}=="1905", ENV{ID_MM_ERICSSON_MBM}="1"
-ATTRS{idVendor}=="0bdb", ATTRS{idProduct}=="1906", ENV{ID_MM_ERICSSON_MBM}="1"
-
-# Ericsson F3307
-ATTRS{idVendor}=="0bdb", ATTRS{idProduct}=="190a", ENV{ID_MM_ERICSSON_MBM}="1"
-ATTRS{idVendor}=="0bdb", ATTRS{idProduct}=="1909", ENV{ID_MM_ERICSSON_MBM}="1"
-
-# Ericsson C3607w
-ATTRS{idVendor}=="0bdb", ATTRS{idProduct}=="1049", ENV{ID_MM_ERICSSON_MBM}="1"
-
-# Ericsson C3607w v2
-ATTRS{idVendor}=="0bdb", ATTRS{idProduct}=="190b", ENV{ID_MM_ERICSSON_MBM}="1"
-
-# Sony-Ericsson MD300
-ATTRS{idVendor}=="0fce", ATTRS{idProduct}=="d0cf", ENV{ID_MM_ERICSSON_MBM}="1"
-
-# Sony-Ericsson MD400
-ATTRS{idVendor}=="0fce", ATTRS{idProduct}=="d0e1", ENV{ID_MM_ERICSSON_MBM}="1"
-
-# Dell 5530 HSDPA
-ATTRS{idVendor}=="413c", ATTRS{idProduct}=="8147", ENV{ID_MM_ERICSSON_MBM}="1"
-
-# Dell F3607gw
-ATTRS{idVendor}=="413c", ATTRS{idProduct}=="8183", ENV{ID_MM_ERICSSON_MBM}="1"
-ATTRS{idVendor}=="413c", ATTRS{idProduct}=="8184", ENV{ID_MM_ERICSSON_MBM}="1"
-
-# Dell F3307
-ATTRS{idVendor}=="413c", ATTRS{idProduct}=="818b", ENV{ID_MM_ERICSSON_MBM}="1"
-ATTRS{idVendor}=="413c", ATTRS{idProduct}=="818c", ENV{ID_MM_ERICSSON_MBM}="1"
-
-# Toshiba
-ATTRS{idVendor}=="0930", ATTRS{idProduct}=="130b", ENV{ID_MM_ERICSSON_MBM}="1"
-
-# Toshiba F3607gw
-ATTRS{idVendor}=="0930", ATTRS{idProduct}=="130c", ENV{ID_MM_ERICSSON_MBM}="1"
-ATTRS{idVendor}=="0930", ATTRS{idProduct}=="1311", ENV{ID_MM_ERICSSON_MBM}="1"
-
-LABEL="mm_mbm_end"
-
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-# Longcheer makes modules that other companies rebrand, like:
-#
-# Alcatel One Touch X020
-# Alcatel One Touch X030
-# MobiData MBD-200HU
-# ST Mobile Connect HSUPA USB Modem
-#
-# Most of these values were scraped from various Longcheer-based Windows
-# driver .inf files. cmmdm.inf lists the actual data (ie PPP) ports, while
-# cmser.inf lists the aux ports that may be either AT-capable or not but
-# cannot be used for PPP.
-
-
-ACTION!="add|change", GOTO="mm_longcheer_port_types_end"
-SUBSYSTEM!="tty", GOTO="mm_longcheer_port_types_end"
-
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c9e", GOTO="mm_longcheer_vendorcheck"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1bbb", GOTO="mm_tamobile_vendorcheck"
-GOTO="mm_longcheer_port_types_end"
-
-LABEL="mm_longcheer_vendorcheck"
-SUBSYSTEMS=="usb", ATTRS{bInterfaceNumber}=="?*", ENV{.MM_USBIFNUM}="$attr{bInterfaceNumber}"
-
-ATTRS{idProduct}=="3197", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="3197", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="3197", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="6000", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="6000", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="6000", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="6060", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="6060", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="6060", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-# Alcatel One Touch X020
-ATTRS{idProduct}=="6061", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="6061", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="6061", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="7001", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="7001", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="7001", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="7001", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="7002", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="7002", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="7002", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="7002", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="7002", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="7101", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="7101", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="7101", ENV{.MM_USBIFNUM}=="05", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="7101", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="7102", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="7102", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="7102", ENV{.MM_USBIFNUM}=="05", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="7102", ENV{.MM_USBIFNUM}=="06", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="7102", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="8000", ENV{.MM_USBIFNUM}=="05", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="8000", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="8000", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="8000", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="8001", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="8001", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="8001", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="8001", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="8002", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="8002", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="8002", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="8002", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-# ChinaBird PL68
-ATTRS{idProduct}=="9000", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9000", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9000", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="9001", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9001", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9001", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9001", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="9002", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9002", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9002", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9002", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="9003", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9003", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9003", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9003", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9003", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="9004", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9004", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9004", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="9005", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9005", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9005", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="9010", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9010", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9010", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9010", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="9012", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9012", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9012", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9012", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="9020", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9020", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9020", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9020", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="9022", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9022", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9022", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9022", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-# Zoom products
-ATTRS{idProduct}=="9602", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9602", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9602", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9602", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="9603", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9603", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9603", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9603", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="9604", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9604", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9604", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9604", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="9605", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9605", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9605", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9605", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9605", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="9606", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9606", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9606", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9606", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9606", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-ATTRS{idProduct}=="9607", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9607", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9607", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9607", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9607", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9607", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-GOTO="mm_longcheer_port_types_end"
-
-
-LABEL="mm_tamobile_vendorcheck"
-SUBSYSTEMS=="usb", ATTRS{bInterfaceNumber}=="?*", ENV{.MM_USBIFNUM}="$attr{bInterfaceNumber}"
-
-# Alcatel One Touch X060s
-ATTRS{idProduct}=="0000", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_LONGCHEER_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0000", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_LONGCHEER_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="0000", ENV{ID_MM_LONGCHEER_TAGGED}="1"
-
-GOTO="mm_longcheer_port_types_end"
-
-
-LABEL="mm_longcheer_port_types_end"
-
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION!="add|change", GOTO="mm_pcmcia_device_blacklist_end"
-SUBSYSTEM!="pcmcia", GOTO="mm_pcmcia_device_blacklist_end"
-
-# Gemplus Serial Port smartcard adapter
-ATTRS{prod_id1}=="Gemplus", ATTRS{prod_id2}=="SerialPort", ATTRS{prod_id3}=="GemPC Card", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-LABEL="mm_pcmcia_device_blacklist_end"
-
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION!="add|change", GOTO="mm_platform_device_whitelist_end"
-SUBSYSTEM!="platform", GOTO="mm_platform_device_whitelist_end"
-
-# Be careful here since many devices connected to platform drivers on PCs
-# are legacy devices that won't like probing. But often on embedded
-# systems serial ports are provided by platform devices.
-
-# Allow atmel_usart
-DRIVERS=="atmel_usart", ENV{ID_MM_PLATFORM_DRIVER_PROBE}="1"
-
-LABEL="mm_platform_device_whitelist_end"
-
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-# Simtech makes modules that other companies rebrand, like:
-#
-# A-LINK 3GU
-#
-# Most of these values were scraped from various SimTech-based Windows
-# driver .inf files. *mdm.inf lists the main command ports, while
-# *ser.inf lists the aux ports that may be used for PPP.
-
-
-ACTION!="add|change", GOTO="mm_simtech_port_types_end"
-SUBSYSTEM!="tty", GOTO="mm_simtech_port_types_end"
-
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1e0e", GOTO="mm_alink_vendorcheck"
-GOTO="mm_simtech_port_types_end"
-
-LABEL="mm_alink_vendorcheck"
-SUBSYSTEMS=="usb", ATTRS{bInterfaceNumber}=="?*", ENV{.MM_USBIFNUM}="$attr{bInterfaceNumber}"
-
-ATTRS{idProduct}=="9200", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_SIMTECH_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="9200", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_SIMTECH_PORT_TYPE_AUX}="1"
-ATTRS{idProduct}=="9200", ENV{ID_MM_SIMTECH_TAGGED}="1"
-
-GOTO="mm_simtech_port_types_end"
-
-
-LABEL="mm_simtech_port_types_end"
-
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION!="add|change", GOTO="mm_usb_device_blacklist_end"
-SUBSYSTEM!="usb", GOTO="mm_usb_device_blacklist_end"
-ENV{DEVTYPE}!="usb_device", GOTO="mm_usb_device_blacklist_end"
-
-# APC UPS devices
-ATTRS{idVendor}=="051d", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# Sweex 1000VA
-ATTRS{idVendor}=="0925", ATTRS{idProduct}=="1234", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# Agiler UPS
-ATTRS{idVendor}=="05b8", ATTRS{idProduct}=="0000", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# Krauler UP-M500VA
-ATTRS{idVendor}=="0001", ATTRS{idProduct}=="0000", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# Ablerex 625L USB
-ATTRS{idVendor}=="ffff", ATTRS{idProduct}=="0000", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# Belkin F6C1200-UNV
-ATTRS{idVendor}=="0665", ATTRS{idProduct}=="5161", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# Various Liebert and Phoenixtec Power devices
-ATTRS{idVendor}=="06da", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# Unitek Alpha 1200Sx
-ATTRS{idVendor}=="0f03", ATTRS{idProduct}=="0001", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# Various Tripplite devices
-ATTRS{idVendor}=="09ae", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# Various MGE Office Protection Systems devices
-ATTRS{idVendor}=="0463", ATTRS{idProduct}=="0001", ENV{ID_MM_DEVICE_IGNORE}="1"
-ATTRS{idVendor}=="0463", ATTRS{idProduct}=="ffff", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# CyberPower 900AVR/BC900D
-ATTRS{idVendor}=="0764", ATTRS{idProduct}=="0005", ENV{ID_MM_DEVICE_IGNORE}="1"
-# CyberPower CP1200AVR/BC1200D
-ATTRS{idVendor}=="0764", ATTRS{idProduct}=="0501", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# Various Belkin devices
-ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0980", ENV{ID_MM_DEVICE_IGNORE}="1"
-ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0900", ENV{ID_MM_DEVICE_IGNORE}="1"
-ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0910", ENV{ID_MM_DEVICE_IGNORE}="1"
-ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0912", ENV{ID_MM_DEVICE_IGNORE}="1"
-ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0551", ENV{ID_MM_DEVICE_IGNORE}="1"
-ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0751", ENV{ID_MM_DEVICE_IGNORE}="1"
-ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0375", ENV{ID_MM_DEVICE_IGNORE}="1"
-ATTRS{idVendor}=="050d", ATTRS{idProduct}=="1100", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# HP R/T 2200 INTL (like SMART2200RMXL2U)
-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1f0a", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# Powerware devices
-ATTRS{idVendor}=="0592", ATTRS{idProduct}=="0002", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# Palm Treo 700/900/etc
-# Shouldn't be probed themselves, but you can install programs like
-# "MobileStream USB Modem" which changes the USB PID of the device to something
-# that isn't blacklisted.
-ATTRS{idVendor}=="0830", ATTRS{idProduct}=="0061", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-LABEL="mm_usb_device_blacklist_end"
-
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION!="add|change", GOTO="mm_zte_port_types_end"
-SUBSYSTEM!="tty", GOTO="mm_zte_port_types_end"
-
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="19d2", GOTO="mm_zte_port_types_vendorcheck"
-GOTO="mm_zte_port_types_end"
-
-LABEL="mm_zte_port_types_vendorcheck"
-SUBSYSTEMS=="usb", ATTRS{bInterfaceNumber}=="?*", ENV{.MM_USBIFNUM}="$attr{bInterfaceNumber}"
-
-ATTRS{idProduct}=="0001", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0001", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0002", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0002", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0003", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0003", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0004", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0004", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0005", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0005", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0006", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0006", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0007", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0007", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0008", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0008", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0009", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0009", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="000A", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="000A", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0012", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0012", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0015", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0015", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0016", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0016", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0017", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0017", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0018", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0018", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0019", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0019", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0021", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0021", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0024", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0024", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0025", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0025", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0030", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0030", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0031", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0031", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0033", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0033", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0037", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0037", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0042", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0042", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0043", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0043", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0048", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0048", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0049", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0049", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0052", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0052", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0055", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0055", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0061", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0061", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0063", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0063", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0064", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0064", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="0066", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="0066", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-ATTRS{idProduct}=="2002", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
-ATTRS{idProduct}=="2002", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
-
-LABEL="mm_zte_port_types_end"
-
projects / config / samara / etc.git / commitdiff