--- /dev/null
+#
+# System configuration file for Mutt
+#
+
+# Default list of header fields to weed when displaying.
+# Ignore all lines by default...
+ignore *
+
+# ... then allow these through.
+unignore from: subject to cc date x-mailer x-url user-agent
+
+# Display the fields in this order
+hdr_order date from to cc subject
+
+# imitate the old search-body function
+macro index \eb "<search>~b " "search in message bodies"
+
+# simulate the old url menu
+macro index,pager,attach,compose \cb "\
+<enter-command> set my_pipe_decode=\$pipe_decode pipe_decode<Enter>\
+<pipe-message> urlview<Enter>\
+<enter-command> set pipe_decode=\$my_pipe_decode; unset my_pipe_decode<Enter>" \
+"call urlview to extract URLs out of a message"
+
+# Show documentation when pressing F1
+macro generic,pager <F1> "<shell-escape> less /usr/share/doc/mutt-1.5.21-r1/manual.txt<Enter>" "show Mutt documentation"
+
+# show the incoming mailboxes list (just like "mutt -y") and back when pressing "y"
+macro index,pager y "<change-folder>?<toggle-mailboxes>" "show incoming mailboxes list"
+bind browser y exit
+
+# Use folders which match on \\.gz$ as gzipped folders:
+# open-hook \\.gz$ "gzip -cd %f > %t"
+# close-hook \\.gz$ "gzip -c %t > %f"
+# append-hook \\.gz$ "gzip -c %t >> %f"
+
+# If Mutt is unable to determine your site's domain name correctly, you can
+# set the default here.
+#
+# set hostname=cs.hmc.edu
+
+# If your sendmail supports the -B8BITMIME flag, enable the following
+#
+# set use_8bitmime
+
+# Use mime.types to look up handlers for application/octet-stream. Can
+# be undone with unmime_lookup.
+mime_lookup application/octet-stream
+
+##
+## *** DEFAULT SETTINGS FOR THE ATTACHMENTS PATCH ***
+##
+
+##
+## Please see the manual (section "attachments") for detailed
+## documentation of the "attachments" command.
+##
+## Removing a pattern from a list removes that pattern literally. It
+## does not remove any type matching the pattern.
+##
+## attachments +A */.*
+## attachments +A image/jpeg
+## unattachments +A */.*
+##
+## This leaves "attached" image/jpeg files on the allowed attachments
+## list. It does not remove all items, as you might expect, because the
+## second */.* is not a matching expression at this time.
+##
+## Remember: "unattachments" only undoes what "attachments" has done!
+## It does not trigger any matching on actual messages.
+
+## Qualify any MIME part with an "attachment" disposition, EXCEPT for
+## text/x-vcard and application/pgp parts. (PGP parts are already known
+## to mutt, and can be searched for with ~g, ~G, and ~k.)
+##
+## I've added x-pkcs7 to this, since it functions (for S/MIME)
+## analogously to PGP signature attachments. S/MIME isn't supported
+## in a stock mutt build, but we can still treat it specially here.
+##
+attachments +A */.*
+attachments -A text/x-vcard application/pgp.*
+attachments -A application/x-pkcs7-.*
+
+## Discount all MIME parts with an "inline" disposition, unless they're
+## text/plain. (Why inline a text/plain part unless it's external to the
+## message flow?)
+##
+attachments +I text/plain
+
+## These two lines make Mutt qualify MIME containers. (So, for example,
+## a message/rfc822 forward will count as an attachment.) The first
+## line is unnecessary if you already have "attach-allow */.*", of
+## course. These are off by default! The MIME elements contained
+## within a message/* or multipart/* are still examined, even if the
+## containers themselves don't qualify.
+##
+#attachments +A message/.* multipart/.*
+#attachments +I message/.* multipart/.*
+
+## You probably don't really care to know about deleted attachments.
+attachments -A message/external-body
+attachments -I message/external-body
+
+##
+## More settings
+##
+
+
+# set abort_nosubject=ask-yes
+#
+# Name: abort_nosubject
+# Type: quadoption
+# Default: ask-yes
+#
+#
+# If set to yes, when composing messages and no subject is given
+# at the subject prompt, composition will be aborted. If set to
+# no, composing messages with no subject given at the subject
+# prompt will never be aborted.
+#
+#
+# set abort_unmodified=yes
+#
+# Name: abort_unmodified
+# Type: quadoption
+# Default: yes
+#
+#
+# If set to yes, composition will automatically abort after
+# editing the message body if no changes are made to the file (this
+# check only happens after the first edit of the file). When set
+# to no, composition will never be aborted.
+#
+#
+# set alias_file="~/.muttrc"
+#
+# Name: alias_file
+# Type: path
+# Default: "~/.muttrc"
+#
+#
+# The default file in which to save aliases created by the
+# <create-alias> function. Entries added to this file are
+# encoded in the character set specified by $config_charset if it
+# is set or the current character set otherwise.
+#
+# Note: Mutt will not automatically source this file; you must
+# explicitly use the ``source'' command for it to be executed in case
+# this option points to a dedicated alias file.
+#
+# The default for this option is the currently used muttrc file, or
+# ``~/.muttrc'' if no user muttrc was found.
+#
+#
+# set alias_format="%4n %2f %t %-10a %r"
+#
+# Name: alias_format
+# Type: string
+# Default: "%4n %2f %t %-10a %r"
+#
+#
+# Specifies the format of the data displayed for the ``alias'' menu. The
+# following printf(3)-style sequences are available:
+# %a alias name
+# %f flags - currently, a ``d'' for an alias marked for deletion
+# %n index number
+# %r address which alias expands to
+# %t character which indicates if the alias is tagged for inclusion
+#
+#
+# set allow_8bit=yes
+#
+# Name: allow_8bit
+# Type: boolean
+# Default: yes
+#
+#
+# Controls whether 8-bit data is converted to 7-bit using either Quoted-
+# Printable or Base64 encoding when sending mail.
+#
+#
+# set allow_ansi=no
+#
+# Name: allow_ansi
+# Type: boolean
+# Default: no
+#
+#
+# Controls whether ANSI color codes in messages (and color tags in
+# rich text messages) are to be interpreted.
+# Messages containing these codes are rare, but if this option is set,
+# their text will be colored accordingly. Note that this may override
+# your color choices, and even present a security problem, since a
+# message could include a line like
+# [-- PGP output follows ...
+#
+# and give it the same color as your attachment color (see also
+# $crypt_timestamp).
+#
+#
+# set arrow_cursor=no
+#
+# Name: arrow_cursor
+# Type: boolean
+# Default: no
+#
+#
+# When set, an arrow (``->'') will be used to indicate the current entry
+# in menus instead of highlighting the whole line. On slow network or modem
+# links this will make response faster because there is less that has to
+# be redrawn on the screen when moving to the next or previous entries
+# in the menu.
+#
+#
+# set ascii_chars=no
+#
+# Name: ascii_chars
+# Type: boolean
+# Default: no
+#
+#
+# If set, Mutt will use plain ASCII characters when displaying thread
+# and attachment trees, instead of the default ACS characters.
+#
+#
+# set askbcc=no
+#
+# Name: askbcc
+# Type: boolean
+# Default: no
+#
+#
+# If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients
+# before editing an outgoing message.
+#
+#
+# set askcc=no
+#
+# Name: askcc
+# Type: boolean
+# Default: no
+#
+#
+# If set, Mutt will prompt you for carbon-copy (Cc) recipients before
+# editing the body of an outgoing message.
+#
+#
+# set ask_follow_up=no
+#
+# Name: ask_follow_up
+# Type: boolean
+# Default: no
+#
+#
+# If set, Mutt will prompt you for follow-up groups before editing
+# the body of an outgoing message.
+#
+#
+# set ask_x_comment_to=no
+#
+# Name: ask_x_comment_to
+# Type: boolean
+# Default: no
+#
+#
+# If set, Mutt will prompt you for x-comment-to field before editing
+# the body of an outgoing message.
+#
+#
+# set assumed_charset=""
+#
+# Name: assumed_charset
+# Type: string
+# Default: ""
+#
+#
+# This variable is a colon-separated list of character encoding
+# schemes for messages without character encoding indication.
+# Header field values and message body content without character encoding
+# indication would be assumed that they are written in one of this list.
+# By default, all the header fields and message body without any charset
+# indication are assumed to be in ``us-ascii''.
+#
+# For example, Japanese users might prefer this:
+# set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
+#
+# However, only the first content is valid for the message body.
+#
+#
+# set attach_charset=""
+#
+# Name: attach_charset
+# Type: string
+# Default: ""
+#
+#
+# This variable is a colon-separated list of character encoding
+# schemes for text file attachments. Mutt uses this setting to guess
+# which encoding files being attached are encoded in to convert them to
+# a proper character set given in $send_charset.
+#
+# If unset, the value of $charset will be used instead.
+# For example, the following configuration would work for Japanese
+# text handling:
+# set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
+#
+# Note: for Japanese users, ``iso-2022-*'' must be put at the head
+# of the value as shown above if included.
+#
+#
+# set attach_format="%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
+#
+# Name: attach_format
+# Type: string
+# Default: "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
+#
+#
+# This variable describes the format of the ``attachment'' menu. The
+# following printf(3)-style sequences are understood:
+# %C charset
+# %c requires charset conversion (``n'' or ``c'')
+# %D deleted flag
+# %d description
+# %e MIME content-transfer-encoding
+# %f filename
+# %I disposition (``I'' for inline, ``A'' for attachment)
+# %m major MIME type
+# %M MIME subtype
+# %n attachment number
+# %Q ``Q'', if MIME part qualifies for attachment counting
+# %s size
+# %t tagged flag
+# %T graphic tree characters
+# %u unlink (=to delete) flag
+# %X number of qualifying MIME parts in this part and its children
+# (please see the ``attachments'' section for possible speed effects)
+# %>X right justify the rest of the string and pad with character ``X''
+# %|X pad to the end of the line with character ``X''
+# %*X soft-fill with character ``X'' as pad
+#
+#
+# For an explanation of ``soft-fill'', see the $index_format documentation.
+#
+#
+# set attach_sep="\n"
+#
+# Name: attach_sep
+# Type: string
+# Default: "\n"
+#
+#
+# The separator to add between attachments when operating (saving,
+# printing, piping, etc) on a list of tagged attachments.
+#
+#
+# set attach_split=yes
+#
+# Name: attach_split
+# Type: boolean
+# Default: yes
+#
+#
+# If this variable is unset, when operating (saving, printing, piping,
+# etc) on a list of tagged attachments, Mutt will concatenate the
+# attachments and will operate on them as a single attachment. The
+# $attach_sep separator is added after each attachment. When set,
+# Mutt will operate on the attachments one by one.
+#
+#
+# set attribution="On %d, %n wrote:"
+#
+# Name: attribution
+# Type: string
+# Default: "On %d, %n wrote:"
+#
+#
+# This is the string that will precede a message which has been included
+# in a reply. For a full listing of defined printf(3)-like sequences see
+# the section on $index_format.
+#
+#
+# set auto_tag=no
+#
+# Name: auto_tag
+# Type: boolean
+# Default: no
+#
+#
+# When set, functions in the index menu which affect a message
+# will be applied to all tagged messages (if there are any). When
+# unset, you must first use the <tag-prefix> function (bound to ``;''
+# by default) to make the next function apply to all tagged messages.
+#
+#
+# set autoedit=no
+#
+# Name: autoedit
+# Type: boolean
+# Default: no
+#
+#
+# When set along with $edit_headers, Mutt will skip the initial
+# send-menu (prompting for subject and recipients) and allow you to
+# immediately begin editing the body of your
+# message. The send-menu may still be accessed once you have finished
+# editing the body of your message.
+#
+# Note: when this option is set, you cannot use send-hooks that depend
+# on the recipients when composing a new (non-reply) message, as the initial
+# list of recipients is empty.
+#
+# Also see $fast_reply.
+#
+#
+# set beep=yes
+#
+# Name: beep
+# Type: boolean
+# Default: yes
+#
+#
+# When this variable is set, mutt will beep when an error occurs.
+#
+#
+# set beep_new=no
+#
+# Name: beep_new
+# Type: boolean
+# Default: no
+#
+#
+# When this variable is set, mutt will beep whenever it prints a message
+# notifying you of new mail. This is independent of the setting of the
+# $beep variable.
+#
+#
+# set bounce=ask-yes
+#
+# Name: bounce
+# Type: quadoption
+# Default: ask-yes
+#
+#
+# Controls whether you will be asked to confirm bouncing messages.
+# If set to yes you don't get asked if you want to bounce a
+# message. Setting this variable to no is not generally useful,
+# and thus not recommended, because you are unable to bounce messages.
+#
+#
+# set bounce_delivered=yes
+#
+# Name: bounce_delivered
+# Type: boolean
+# Default: yes
+#
+#
+# When this variable is set, mutt will include Delivered-To headers when
+# bouncing messages. Postfix users may wish to unset this variable.
+#
+#
+# set braille_friendly=no
+#
+# Name: braille_friendly
+# Type: boolean
+# Default: no
+#
+#
+# When this variable is set, mutt will place the cursor at the beginning
+# of the current line in menus, even when the $arrow_cursor variable
+# is unset, making it easier for blind persons using Braille displays to
+# follow these menus. The option is unset by default because many
+# visual terminals don't permit making the cursor invisible.
+#
+#
+# set catchup_newsgroup=ask-yes
+#
+# Name: catchup_newsgroup
+# Type: quadoption
+# Default: ask-yes
+#
+#
+# If this variable is set, Mutt will mark all articles in newsgroup
+# as read when you quit the newsgroup (catchup newsgroup).
+#
+#
+# set certificate_file="~/.mutt_certificates"
+#
+# Name: certificate_file
+# Type: path
+# Default: "~/.mutt_certificates"
+#
+#
+# This variable specifies the file where the certificates you trust
+# are saved. When an unknown certificate is encountered, you are asked
+# if you accept it or not. If you accept it, the certificate can also
+# be saved in this file and further connections are automatically
+# accepted.
+#
+# You can also manually add CA certificates in this file. Any server
+# certificate that is signed with one of these CA certificates is
+# also automatically accepted.
+#
+# Example:
+# set certificate_file=~/.mutt/certificates
+#
+#
+# set charset=""
+#
+# Name: charset
+# Type: string
+# Default: ""
+#
+#
+# Character set your terminal uses to display and enter textual data.
+# It is also the fallback for $send_charset.
+#
+# Upon startup Mutt tries to derive this value from environment variables
+# such as $LC_CTYPE or $LANG.
+#
+# Note: It should only be set in case Mutt isn't able to determine the
+# character set used correctly.
+#
+#
+# set check_mbox_size=no
+#
+# Name: check_mbox_size
+# Type: boolean
+# Default: no
+#
+#
+# When this variable is set, mutt will use file size attribute instead of
+# access time when checking for new mail in mbox and mmdf folders.
+#
+# This variable is unset by default and should only be enabled when
+# new mail detection for these folder types is unreliable or doesn't work.
+#
+# Note that enabling this variable should happen before any ``mailboxes''
+# directives occur in configuration files regarding mbox or mmdf folders
+# because mutt needs to determine the initial new mail status of such a
+# mailbox by performing a fast mailbox scan when it is defined.
+# Afterwards the new mail status is tracked by file size changes.
+#
+#
+# set change_folder_next=no
+#
+# Name: change_folder_next
+# Type: boolean
+# Default: no
+#
+#
+# When this variable is set, the change-folder command will start at the
+# next folder after the current folder in your mailbox list instead of
+# starting at the first folder.
+#
+#
+# set check_new=yes
+#
+# Name: check_new
+# Type: boolean
+# Default: yes
+#
+#
+# Note: this option only affects maildir and MH style
+# mailboxes.
+#
+# When set, Mutt will check for new mail delivered while the
+# mailbox is open. Especially with MH mailboxes, this operation can
+# take quite some time since it involves scanning the directory and
+# checking each file to see if it has already been looked at. If
+# this variable is unset, no check for new mail is performed
+# while the mailbox is open.
+#
+#
+# set collapse_unread=yes
+#
+# Name: collapse_unread
+# Type: boolean
+# Default: yes
+#
+#
+# When unset, Mutt will not collapse a thread if it contains any
+# unread messages.
+#
+#
+# set collapse_flagged=yes
+#
+# Name: collapse_flagged
+# Type: boolean
+# Default: yes
+#
+#
+# When unset, Mutt will not collapse a thread if it contains any
+# flagged messages.
+#
+#
+# set compose_format="-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-"
+#
+# Name: compose_format
+# Type: string
+# Default: "-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-"
+#
+#
+# Controls the format of the status line displayed in the ``compose''
+# menu. This string is similar to $status_format, but has its own
+# set of printf(3)-like sequences:
+# %a total number of attachments
+# %h local hostname
+# %l approximate size (in bytes) of the current message
+# %v Mutt version string
+#
+#
+# See the text describing the $status_format option for more
+# information on how to set $compose_format.
+#
+#
+# set config_charset=""
+#
+# Name: config_charset
+# Type: string
+# Default: ""
+#
+#
+# When defined, Mutt will recode commands in rc files from this
+# encoding to the current character set as specified by $charset
+# and aliases written to $alias_file from the current character set.
+#
+# Please note that if setting $charset it must be done before
+# setting $config_charset.
+#
+# Recoding should be avoided as it may render unconvertable
+# characters as question marks which can lead to undesired
+# side effects (for example in regular expressions).
+#
+#
+# set confirmappend=yes
+#
+# Name: confirmappend
+# Type: boolean
+# Default: yes
+#
+#
+# When set, Mutt will prompt for confirmation when appending messages to
+# an existing mailbox.
+#
+#
+# set confirmcreate=yes
+#
+# Name: confirmcreate
+# Type: boolean
+# Default: yes
+#
+#
+# When set, Mutt will prompt for confirmation when saving messages to a
+# mailbox which does not yet exist before creating it.
+#
+#
+# set connect_timeout=30
+#
+# Name: connect_timeout
+# Type: number
+# Default: 30
+#
+#
+# Causes Mutt to timeout a network connection (for IMAP, POP or SMTP) after this
+# many seconds if the connection is not able to be established. A negative
+# value causes Mutt to wait indefinitely for the connection attempt to succeed.
+#
+#
+# set content_type="text/plain"
+#
+# Name: content_type
+# Type: string
+# Default: "text/plain"
+#
+#
+# Sets the default Content-Type for the body of newly composed messages.
+#
+#
+# set copy=yes
+#
+# Name: copy
+# Type: quadoption
+# Default: yes
+#
+#
+# This variable controls whether or not copies of your outgoing messages
+# will be saved for later references. Also see $record,
+# $save_name, $force_name and ``fcc-hook''.
+#
+#
+# set crypt_autoencrypt=no
+#
+# Name: crypt_autoencrypt
+# Type: boolean
+# Default: no
+#
+#
+# Setting this variable will cause Mutt to always attempt to PGP
+# encrypt outgoing messages. This is probably only useful in
+# connection to the ``send-hook'' command. It can be overridden
+# by use of the pgp menu, when encryption is not required or
+# signing is requested as well. If $smime_is_default is set,
+# then OpenSSL is used instead to create S/MIME messages and
+# settings can be overridden by use of the smime menu instead.
+# (Crypto only)
+#
+#
+# set crypt_autopgp=yes
+#
+# Name: crypt_autopgp
+# Type: boolean
+# Default: yes
+#
+#
+# This variable controls whether or not mutt may automatically enable
+# PGP encryption/signing for messages. See also $crypt_autoencrypt,
+# $crypt_replyencrypt,
+# $crypt_autosign, $crypt_replysign and $smime_is_default.
+#
+#
+# set crypt_autosign=no
+#
+# Name: crypt_autosign
+# Type: boolean
+# Default: no
+#
+#
+# Setting this variable will cause Mutt to always attempt to
+# cryptographically sign outgoing messages. This can be overridden
+# by use of the pgp menu, when signing is not required or
+# encryption is requested as well. If $smime_is_default is set,
+# then OpenSSL is used instead to create S/MIME messages and settings can
+# be overridden by use of the smime menu instead of the pgp menu.
+# (Crypto only)
+#
+#
+# set crypt_autosmime=yes
+#
+# Name: crypt_autosmime
+# Type: boolean
+# Default: yes
+#
+#
+# This variable controls whether or not mutt may automatically enable
+# S/MIME encryption/signing for messages. See also $crypt_autoencrypt,
+# $crypt_replyencrypt,
+# $crypt_autosign, $crypt_replysign and $smime_is_default.
+#
+#
+# set crypt_replyencrypt=yes
+#
+# Name: crypt_replyencrypt
+# Type: boolean
+# Default: yes
+#
+#
+# If set, automatically PGP or OpenSSL encrypt replies to messages which are
+# encrypted.
+# (Crypto only)
+#
+#
+# set crypt_replysign=no
+#
+# Name: crypt_replysign
+# Type: boolean
+# Default: no
+#
+#
+# If set, automatically PGP or OpenSSL sign replies to messages which are
+# signed.
+#
+# Note: this does not work on messages that are encrypted
+# and signed!
+# (Crypto only)
+#
+#
+# set crypt_replysignencrypted=no
+#
+# Name: crypt_replysignencrypted
+# Type: boolean
+# Default: no
+#
+#
+# If set, automatically PGP or OpenSSL sign replies to messages
+# which are encrypted. This makes sense in combination with
+# $crypt_replyencrypt, because it allows you to sign all
+# messages which are automatically encrypted. This works around
+# the problem noted in $crypt_replysign, that mutt is not able
+# to find out whether an encrypted message is also signed.
+# (Crypto only)
+#
+#
+# set crypt_timestamp=yes
+#
+# Name: crypt_timestamp
+# Type: boolean
+# Default: yes
+#
+#
+# If set, mutt will include a time stamp in the lines surrounding
+# PGP or S/MIME output, so spoofing such lines is more difficult.
+# If you are using colors to mark these lines, and rely on these,
+# you may unset this setting.
+# (Crypto only)
+#
+#
+# set crypt_use_gpgme=no
+#
+# Name: crypt_use_gpgme
+# Type: boolean
+# Default: no
+#
+#
+# This variable controls the use of the GPGME-enabled crypto backends.
+# If it is set and Mutt was built with gpgme support, the gpgme code for
+# S/MIME and PGP will be used instead of the classic code. Note that
+# you need to set this option in .muttrc; it won't have any effect when
+# used interactively.
+#
+#
+# set crypt_use_pka=no
+#
+# Name: crypt_use_pka
+# Type: boolean
+# Default: no
+#
+#
+# Controls whether mutt uses PKA
+# (see http://www.g10code.de/docs/pka-intro.de.pdf) during signature
+# verification (only supported by the GPGME backend).
+#
+#
+# set crypt_verify_sig=yes
+#
+# Name: crypt_verify_sig
+# Type: quadoption
+# Default: yes
+#
+#
+# If ``yes'', always attempt to verify PGP or S/MIME signatures.
+# If ``ask-*'', ask whether or not to verify the signature.
+# If ``no'', never attempt to verify cryptographic signatures.
+# (Crypto only)
+#
+#
+# set date_format="!%a, %b %d, %Y at %I:%M:%S%p %Z"
+#
+# Name: date_format
+# Type: string
+# Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z"
+#
+#
+# This variable controls the format of the date printed by the ``%d''
+# sequence in $index_format. This is passed to the strftime(3)
+# function to process the date, see the man page for the proper syntax.
+#
+# Unless the first character in the string is a bang (``!''), the month
+# and week day names are expanded according to the locale specified in
+# the variable $locale. If the first character in the string is a
+# bang, the bang is discarded, and the month and week day names in the
+# rest of the string are expanded in the C locale (that is in US
+# English).
+#
+#
+# set default_hook="~f %s !~P | (~P ~C %s)"
+#
+# Name: default_hook
+# Type: string
+# Default: "~f %s !~P | (~P ~C %s)"
+#
+#
+# This variable controls how ``message-hook'', ``reply-hook'', ``send-hook'',
+# ``send2-hook'', ``save-hook'', and ``fcc-hook'' will
+# be interpreted if they are specified with only a simple regexp,
+# instead of a matching pattern. The hooks are expanded when they are
+# declared, so a hook will be interpreted according to the value of this
+# variable at the time the hook is declared.
+#
+# The default value matches
+# if the message is either from a user matching the regular expression
+# given, or if it is from you (if the from address matches
+# ``alternates'') and is to or cc'ed to a user matching the given
+# regular expression.
+#
+#
+# set delete=ask-yes
+#
+# Name: delete
+# Type: quadoption
+# Default: ask-yes
+#
+#
+# Controls whether or not messages are really deleted when closing or
+# synchronizing a mailbox. If set to yes, messages marked for
+# deleting will automatically be purged without prompting. If set to
+# no, messages marked for deletion will be kept in the mailbox.
+#
+#
+# set delete_untag=yes
+#
+# Name: delete_untag
+# Type: boolean
+# Default: yes
+#
+#
+# If this option is set, mutt will untag messages when marking them
+# for deletion. This applies when you either explicitly delete a message,
+# or when you save it to another folder.
+#
+#
+# set digest_collapse=yes
+#
+# Name: digest_collapse
+# Type: boolean
+# Default: yes
+#
+#
+# If this option is set, mutt's received-attachments menu will not show the subparts of
+# individual messages in a multipart/digest. To see these subparts, press ``v'' on that menu.
+#
+#
+# set display_filter=""
+#
+# Name: display_filter
+# Type: path
+# Default: ""
+#
+#
+# When set, specifies a command used to filter messages. When a message
+# is viewed it is passed as standard input to $display_filter, and the
+# filtered message is read from the standard output.
+#
+#
+# set dotlock_program="/usr/bin/mutt_dotlock"
+#
+# Name: dotlock_program
+# Type: path
+# Default: "/usr/bin/mutt_dotlock"
+#
+#
+# Contains the path of the mutt_dotlock(8) binary to be used by
+# mutt.
+#
+#
+# set dsn_notify=""
+#
+# Name: dsn_notify
+# Type: string
+# Default: ""
+#
+#
+# This variable sets the request for when notification is returned. The
+# string consists of a comma separated list (no spaces!) of one or more
+# of the following: never, to never request notification,
+# failure, to request notification on transmission failure,
+# delay, to be notified of message delays, success, to be
+# notified of successful transmission.
+#
+# Example:
+# set dsn_notify="failure,delay"
+#
+# Note: when using $sendmail for delivery, you should not enable
+# this unless you are either using Sendmail 8.8.x or greater or a MTA
+# providing a sendmail(1)-compatible interface supporting the -N option
+# for DSN. For SMTP delivery, DSN support is auto-detected so that it
+# depends on the server whether DSN will be used or not.
+#
+#
+# set dsn_return=""
+#
+# Name: dsn_return
+# Type: string
+# Default: ""
+#
+#
+# This variable controls how much of your message is returned in DSN
+# messages. It may be set to either hdrs to return just the
+# message header, or full to return the full message.
+#
+# Example:
+# set dsn_return=hdrs
+#
+# Note: when using $sendmail for delivery, you should not enable
+# this unless you are either using Sendmail 8.8.x or greater or a MTA
+# providing a sendmail(1)-compatible interface supporting the -R option
+# for DSN. For SMTP delivery, DSN support is auto-detected so that it
+# depends on the server whether DSN will be used or not.
+#
+#
+# set duplicate_threads=yes
+#
+# Name: duplicate_threads
+# Type: boolean
+# Default: yes
+#
+#
+# This variable controls whether mutt, when $sort is set to threads, threads
+# messages with the same Message-Id together. If it is set, it will indicate
+# that it thinks they are duplicates of each other with an equals sign
+# in the thread tree.
+#
+#
+# set edit_headers=no
+#
+# Name: edit_headers
+# Type: boolean
+# Default: no
+#
+#
+# This option allows you to edit the header of your outgoing messages
+# along with the body of your message.
+#
+# Note that changes made to the References: and Date: headers are
+# ignored for interoperability reasons.
+#
+#
+# set editor=""
+#
+# Name: editor
+# Type: path
+# Default: ""
+#
+#
+# This variable specifies which editor is used by mutt.
+# It defaults to the value of the $VISUAL, or $EDITOR, environment
+# variable, or to the string ``vi'' if neither of those are set.
+#
+#
+# set encode_from=no
+#
+# Name: encode_from
+# Type: boolean
+# Default: no
+#
+#
+# When set, mutt will quoted-printable encode messages when
+# they contain the string ``From '' (note the trailing space) in the beginning of a line.
+# This is useful to avoid the tampering certain mail delivery and transport
+# agents tend to do with messages (in order to prevent tools from
+# misinterpreting the line as a mbox message separator).
+#
+#
+# set entropy_file=""
+#
+# Name: entropy_file
+# Type: path
+# Default: ""
+#
+#
+# The file which includes random data that is used to initialize SSL
+# library functions.
+#
+#
+# set envelope_from_address=""
+#
+# Name: envelope_from_address
+# Type: e-mail address
+# Default: ""
+#
+#
+# Manually sets the envelope sender for outgoing messages.
+# This value is ignored if $use_envelope_from is unset.
+#
+#
+# set escape="~"
+#
+# Name: escape
+# Type: string
+# Default: "~"
+#
+#
+# Escape character to use for functions in the built-in editor.
+#
+#
+# set fast_reply=no
+#
+# Name: fast_reply
+# Type: boolean
+# Default: no
+#
+#
+# When set, the initial prompt for recipients and subject are skipped
+# when replying to messages, and the initial prompt for subject is
+# skipped when forwarding messages.
+#
+# Note: this variable has no effect when the $autoedit
+# variable is set.
+#
+#
+# set fcc_attach=yes
+#
+# Name: fcc_attach
+# Type: quadoption
+# Default: yes
+#
+#
+# This variable controls whether or not attachments on outgoing messages
+# are saved along with the main body of your message.
+#
+#
+# set fcc_clear=no
+#
+# Name: fcc_clear
+# Type: boolean
+# Default: no
+#
+#
+# When this variable is set, FCCs will be stored unencrypted and
+# unsigned, even when the actual message is encrypted and/or
+# signed.
+# (PGP only)
+#
+#
+# set folder="~/Mail"
+#
+# Name: folder
+# Type: path
+# Default: "~/Mail"
+#
+#
+# Specifies the default location of your mailboxes. A ``+'' or ``='' at the
+# beginning of a pathname will be expanded to the value of this
+# variable. Note that if you change this variable (from the default)
+# value you need to make sure that the assignment occurs before
+# you use ``+'' or ``='' for any other variables since expansion takes place
+# when handling the ``mailboxes'' command.
+#
+#
+# set folder_format="%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
+#
+# Name: folder_format
+# Type: string
+# Default: "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
+#
+#
+# This variable allows you to customize the file browser display to your
+# personal taste. This string is similar to $index_format, but has
+# its own set of printf(3)-like sequences:
+# %C current file number
+# %d date/time folder was last modified
+# %D date/time folder was last modified using $date_format.
+# %f filename (``/'' is appended to directory names,
+# ``@'' to symbolic links and ``*'' to executable
+# files)
+# %F file permissions
+# %g group name (or numeric gid, if missing)
+# %l number of hard links
+# %N N if folder has new mail, blank otherwise
+# %s size in bytes
+# %t ``*'' if the file is tagged, blank otherwise
+# %u owner name (or numeric uid, if missing)
+# %>X right justify the rest of the string and pad with character ``X''
+# %|X pad to the end of the line with character ``X''
+# %*X soft-fill with character ``X'' as pad
+#
+#
+# For an explanation of ``soft-fill'', see the $index_format documentation.
+#
+#
+# set followup_to=yes
+#
+# Name: followup_to
+# Type: boolean
+# Default: yes
+#
+#
+# Controls whether or not the ``Mail-Followup-To:'' header field is
+# generated when sending mail. When set, Mutt will generate this
+# field when you are replying to a known mailing list, specified with
+# the ``subscribe'' or ``lists'' commands.
+#
+# This field has two purposes. First, preventing you from
+# receiving duplicate copies of replies to messages which you send
+# to mailing lists, and second, ensuring that you do get a reply
+# separately for any messages sent to known lists to which you are
+# not subscribed.
+#
+# The header will contain only the list's address
+# for subscribed lists, and both the list address and your own
+# email address for unsubscribed lists. Without this header, a
+# group reply to your message sent to a subscribed list will be
+# sent to both the list and your address, resulting in two copies
+# of the same email for you.
+#
+#
+# set followup_to_poster=ask-yes
+#
+# Name: followup_to_poster
+# Type: quadoption
+# Default: ask-yes
+#
+#
+# If this variable is set and the keyword "poster" is present in
+# Followup-To header, follow-up to newsgroup function is not
+# permitted. The message will be mailed to the submitter of the
+# message via mail.
+#
+#
+# set force_name=no
+#
+# Name: force_name
+# Type: boolean
+# Default: no
+#
+#
+# This variable is similar to $save_name, except that Mutt will
+# store a copy of your outgoing message by the username of the address
+# you are sending to even if that mailbox does not exist.
+#
+# Also see the $record variable.
+#
+#
+# set forward_decode=yes
+#
+# Name: forward_decode
+# Type: boolean
+# Default: yes
+#
+#
+# Controls the decoding of complex MIME messages into text/plain when
+# forwarding a message. The message header is also RFC2047 decoded.
+# This variable is only used, if $mime_forward is unset,
+# otherwise $mime_forward_decode is used instead.
+#
+#
+# set forward_decrypt=yes
+#
+# Name: forward_decrypt
+# Type: boolean
+# Default: yes
+#
+#
+# Controls the handling of encrypted messages when forwarding a message.
+# When set, the outer layer of encryption is stripped off. This
+# variable is only used if $mime_forward is set and
+# $mime_forward_decode is unset.
+# (PGP only)
+#
+#
+# set forward_edit=yes
+#
+# Name: forward_edit
+# Type: quadoption
+# Default: yes
+#
+#
+# This quadoption controls whether or not the user is automatically
+# placed in the editor when forwarding messages. For those who always want
+# to forward with no modification, use a setting of ``no''.
+#
+#
+# set forward_format="[%a: %s]"
+#
+# Name: forward_format
+# Type: string
+# Default: "[%a: %s]"
+#
+#
+# This variable controls the default subject when forwarding a message.
+# It uses the same format sequences as the $index_format variable.
+#
+#
+# set forward_quote=no
+#
+# Name: forward_quote
+# Type: boolean
+# Default: no
+#
+#
+# When set, forwarded messages included in the main body of the
+# message (when $mime_forward is unset) will be quoted using
+# $indent_string.
+#
+#
+# set from=""
+#
+# Name: from
+# Type: e-mail address
+# Default: ""
+#
+#
+# When set, this variable contains a default from address. It
+# can be overridden using ``my_hdr'' (including from a ``send-hook'') and
+# $reverse_name. This variable is ignored if $use_from is unset.
+#
+# This setting defaults to the contents of the environment variable $EMAIL.
+#
+#
+# set gecos_mask="^[^,]*"
+#
+# Name: gecos_mask
+# Type: regular expression
+# Default: "^[^,]*"
+#
+#
+# A regular expression used by mutt to parse the GECOS field of a password
+# entry when expanding the alias. The default value
+# will return the string up to the first ``,'' encountered.
+# If the GECOS field contains a string like ``lastname, firstname'' then you
+# should set it to ``.*''.
+#
+# This can be useful if you see the following behavior: you address an e-mail
+# to user ID ``stevef'' whose full name is ``Steve Franklin''. If mutt expands
+# ``stevef'' to ``"Franklin" stevef@foo.bar'' then you should set the $gecos_mask to
+# a regular expression that will match the whole name so mutt will expand
+# ``Franklin'' to ``Franklin, Steve''.
+#
+#
+# set group_index_format="%4C %M%N %5s %-45.45f %d"
+#
+# Name: group_index_format
+# Type: string
+# Default: "%4C %M%N %5s %-45.45f %d"
+#
+#
+# This variable allows you to customize the newsgroup browser display to
+# your personal taste. This string is similar to ``index_format'', but
+# has its own set of printf()-like sequences:
+#
+# %C current newsgroup number
+# %d description of newsgroup (becomes from server)
+# %f newsgroup name
+# %M - if newsgroup not allowed for direct post (moderated for example)
+# %N N if newsgroup is new, u if unsubscribed, blank otherwise
+# %n number of new articles in newsgroup
+# %s number of unread articles in newsgroup
+# %>X right justify the rest of the string and pad with character "X"
+# %|X pad to the end of the line with character "X"
+#
+#
+# set hdrs=yes
+#
+# Name: hdrs
+# Type: boolean
+# Default: yes
+#
+#
+# When unset, the header fields normally added by the ``my_hdr''
+# command are not created. This variable must be unset before
+# composing a new message or replying in order to take effect. If set,
+# the user defined header fields are added to every new message.
+#
+#
+# set header=no
+#
+# Name: header
+# Type: boolean
+# Default: no
+#
+#
+# When set, this variable causes Mutt to include the header
+# of the message you are replying to into the edit buffer.
+# The $weed setting applies.
+#
+#
+# set header_cache=""
+#
+# Name: header_cache
+# Type: path
+# Default: ""
+#
+#
+# This variable points to the header cache database.
+# If pointing to a directory Mutt will contain a header cache
+# database file per folder, if pointing to a file that file will
+# be a single global header cache. By default it is unset so no header
+# caching will be used.
+#
+# Header caching can greatly improve speed when opening POP, IMAP
+# MH or Maildir folders, see ``caching'' for details.
+#
+#
+# set header_cache_compress=yes
+#
+# Name: header_cache_compress
+# Type: boolean
+# Default: yes
+#
+#
+# When mutt is compiled with qdbm or tokyocabinet as header cache backend,
+# this option determines whether the database will be compressed.
+# Compression results in database files roughly being one fifth
+# of the usual diskspace, but the decompression can result in a
+# slower opening of cached folder(s) which in general is still
+# much faster than opening non header cached folders.
+#
+#
+# set header_cache_pagesize="16384"
+#
+# Name: header_cache_pagesize
+# Type: string
+# Default: "16384"
+#
+#
+# When mutt is compiled with either gdbm or bdb4 as the header cache backend,
+# this option changes the database page size. Too large or too small
+# values can waste space, memory, or CPU time. The default should be more
+# or less optimal for most use cases.
+#
+#
+# set help=yes
+#
+# Name: help
+# Type: boolean
+# Default: yes
+#
+#
+# When set, help lines describing the bindings for the major functions
+# provided by each menu are displayed on the first line of the screen.
+#
+# Note: The binding will not be displayed correctly if the
+# function is bound to a sequence rather than a single keystroke. Also,
+# the help line may not be updated if a binding is changed while Mutt is
+# running. Since this variable is primarily aimed at new users, neither
+# of these should present a major problem.
+#
+#
+# set hidden_host=no
+#
+# Name: hidden_host
+# Type: boolean
+# Default: no
+#
+#
+# When set, mutt will skip the host name part of $hostname variable
+# when adding the domain part to addresses. This variable does not
+# affect the generation of Message-IDs, and it will not lead to the
+# cut-off of first-level domains.
+#
+#
+# set hide_limited=no
+#
+# Name: hide_limited
+# Type: boolean
+# Default: no
+#
+#
+# When set, mutt will not show the presence of messages that are hidden
+# by limiting, in the thread tree.
+#
+#
+# set hide_missing=yes
+#
+# Name: hide_missing
+# Type: boolean
+# Default: yes
+#
+#
+# When set, mutt will not show the presence of missing messages in the
+# thread tree.
+#
+#
+# set hide_thread_subject=yes
+#
+# Name: hide_thread_subject
+# Type: boolean
+# Default: yes
+#
+#
+# When set, mutt will not show the subject of messages in the thread
+# tree that have the same subject as their parent or closest previously
+# displayed sibling.
+#
+#
+# set hide_top_limited=no
+#
+# Name: hide_top_limited
+# Type: boolean
+# Default: no
+#
+#
+# When set, mutt will not show the presence of messages that are hidden
+# by limiting, at the top of threads in the thread tree. Note that when
+# $hide_limited is set, this option will have no effect.
+#
+#
+# set hide_top_missing=yes
+#
+# Name: hide_top_missing
+# Type: boolean
+# Default: yes
+#
+#
+# When set, mutt will not show the presence of missing messages at the
+# top of threads in the thread tree. Note that when $hide_missing is
+# set, this option will have no effect.
+#
+#
+# set history=10
+#
+# Name: history
+# Type: number
+# Default: 10
+#
+#
+# This variable controls the size (in number of strings remembered) of
+# the string history buffer per category. The buffer is cleared each time the
+# variable is set.
+#
+#
+# set history_file="~/.mutthistory"
+#
+# Name: history_file
+# Type: path
+# Default: "~/.mutthistory"
+#
+#
+# The file in which Mutt will save its history.
+#
+#
+# set honor_disposition=no
+#
+# Name: honor_disposition
+# Type: boolean
+# Default: no
+#
+#
+# When set, Mutt will not display attachments with a
+# disposition of ``attachment'' inline even if it could
+# render the part to plain text. These MIME parts can only
+# be viewed from the attachment menu.
+#
+# If unset, Mutt will render all MIME parts it can
+# properly transform to plain text.
+#
+#
+# set honor_followup_to=yes
+#
+# Name: honor_followup_to
+# Type: quadoption
+# Default: yes
+#
+#
+# This variable controls whether or not a Mail-Followup-To header is
+# honored when group-replying to a message.
+#
+#
+# set hostname=""
+#
+# Name: hostname
+# Type: string
+# Default: ""
+#
+#
+# Specifies the fully-qualified hostname of the system mutt is running on
+# containing the host's name and the DNS domain it belongs to. It is used
+# as the domain part (after ``@'') for local email addresses as well as
+# Message-Id headers.
+#
+# Its value is determined at startup as follows: If the node's name
+# as returned by the uname(3) function contains the hostname and the
+# domain, these are used to construct $hostname. If there is no
+# domain part returned, Mutt will look for a ``domain'' or ``search''
+# line in /etc/resolv.conf to determine the domain. Optionally, Mutt
+# can be compiled with a fixed domain name in which case a detected
+# one is not used.
+#
+# Also see $use_domain and $hidden_host.
+#
+#
+# set ignore_linear_white_space=no
+#
+# Name: ignore_linear_white_space
+# Type: boolean
+# Default: no
+#
+#
+# This option replaces linear-white-space between encoded-word
+# and text to a single space to prevent the display of MIME-encoded
+# ``Subject:'' field from being divided into multiple lines.
+#
+#
+# set ignore_list_reply_to=no
+#
+# Name: ignore_list_reply_to
+# Type: boolean
+# Default: no
+#
+#
+# Affects the behavior of the <reply> function when replying to
+# messages from mailing lists (as defined by the ``subscribe'' or
+# ``lists'' commands). When set, if the ``Reply-To:'' field is
+# set to the same value as the ``To:'' field, Mutt assumes that the
+# ``Reply-To:'' field was set by the mailing list to automate responses
+# to the list, and will ignore this field. To direct a response to the
+# mailing list when this option is set, use the <list-reply>
+# function; <group-reply> will reply to both the sender and the
+# list.
+#
+#
+# set imap_authenticators=""
+#
+# Name: imap_authenticators
+# Type: string
+# Default: ""
+#
+#
+# This is a colon-delimited list of authentication methods mutt may
+# attempt to use to log in to an IMAP server, in the order mutt should
+# try them. Authentication methods are either ``login'' or the right
+# side of an IMAP ``AUTH=xxx'' capability string, e.g. ``digest-md5'', ``gssapi''
+# or ``cram-md5''. This option is case-insensitive. If it's
+# unset (the default) mutt will try all available methods,
+# in order from most-secure to least-secure.
+#
+# Example:
+# set imap_authenticators="gssapi:cram-md5:login"
+#
+# Note: Mutt will only fall back to other authentication methods if
+# the previous methods are unavailable. If a method is available but
+# authentication fails, mutt will not connect to the IMAP server.
+#
+#
+# set imap_check_subscribed=no
+#
+# Name: imap_check_subscribed
+# Type: boolean
+# Default: no
+#
+#
+# When set, mutt will fetch the set of subscribed folders from
+# your server on connection, and add them to the set of mailboxes
+# it polls for new mail just as if you had issued individual ``mailboxes''
+# commands.
+#
+#
+# set imap_delim_chars="/."
+#
+# Name: imap_delim_chars
+# Type: string
+# Default: "/."
+#
+#
+# This contains the list of characters which you would like to treat
+# as folder separators for displaying IMAP paths. In particular it
+# helps in using the ``='' shortcut for your folder variable.
+#
+#
+# set imap_headers=""
+#
+# Name: imap_headers
+# Type: string
+# Default: ""
+#
+#
+# Mutt requests these header fields in addition to the default headers
+# (``Date:'', ``From:'', ``Subject:'', ``To:'', ``Cc:'', ``Message-Id:'',
+# ``References:'', ``Content-Type:'', ``Content-Description:'', ``In-Reply-To:'',
+# ``Reply-To:'', ``Lines:'', ``List-Post:'', ``X-Label:'') from IMAP
+# servers before displaying the index menu. You may want to add more
+# headers for spam detection.
+#
+# Note: This is a space separated list, items should be uppercase
+# and not contain the colon, e.g. ``X-BOGOSITY X-SPAM-STATUS'' for the
+# ``X-Bogosity:'' and ``X-Spam-Status:'' header fields.
+#
+#
+# set imap_idle=no
+#
+# Name: imap_idle
+# Type: boolean
+# Default: no
+#
+#
+# When set, mutt will attempt to use the IMAP IDLE extension
+# to check for new mail in the current mailbox. Some servers
+# (dovecot was the inspiration for this option) react badly
+# to mutt's implementation. If your connection seems to freeze
+# up periodically, try unsetting this.
+#
+#
+# set imap_keepalive=900
+#
+# Name: imap_keepalive
+# Type: number
+# Default: 900
+#
+#
+# This variable specifies the maximum amount of time in seconds that mutt
+# will wait before polling open IMAP connections, to prevent the server
+# from closing them before mutt has finished with them. The default is
+# well within the RFC-specified minimum amount of time (30 minutes) before
+# a server is allowed to do this, but in practice the RFC does get
+# violated every now and then. Reduce this number if you find yourself
+# getting disconnected from your IMAP server due to inactivity.
+#
+#
+# set imap_list_subscribed=no
+#
+# Name: imap_list_subscribed
+# Type: boolean
+# Default: no
+#
+#
+# This variable configures whether IMAP folder browsing will look for
+# only subscribed folders or all folders. This can be toggled in the
+# IMAP browser with the <toggle-subscribed> function.
+#
+#
+# set imap_login=""
+#
+# Name: imap_login
+# Type: string
+# Default: ""
+#
+#
+# Your login name on the IMAP server.
+#
+# This variable defaults to the value of $imap_user.
+#
+#
+# set imap_pass=""
+#
+# Name: imap_pass
+# Type: string
+# Default: ""
+#
+#
+# Specifies the password for your IMAP account. If unset, Mutt will
+# prompt you for your password when you invoke the <imap-fetch-mail> function
+# or try to open an IMAP folder.
+#
+# Warning: you should only use this option when you are on a
+# fairly secure machine, because the superuser can read your muttrc even
+# if you are the only one who can read the file.
+#
+#
+# set imap_passive=yes
+#
+# Name: imap_passive
+# Type: boolean
+# Default: yes
+#
+#
+# When set, mutt will not open new IMAP connections to check for new
+# mail. Mutt will only check for new mail over existing IMAP
+# connections. This is useful if you don't want to be prompted to
+# user/password pairs on mutt invocation, or if opening the connection
+# is slow.
+#
+#
+# set imap_peek=yes
+#
+# Name: imap_peek
+# Type: boolean
+# Default: yes
+#
+#
+# When set, mutt will avoid implicitly marking your mail as read whenever
+# you fetch a message from the server. This is generally a good thing,
+# but can make closing an IMAP folder somewhat slower. This option
+# exists to appease speed freaks.
+#
+#
+# set imap_pipeline_depth=15
+#
+# Name: imap_pipeline_depth
+# Type: number
+# Default: 15
+#
+#
+# Controls the number of IMAP commands that may be queued up before they
+# are sent to the server. A deeper pipeline reduces the amount of time
+# mutt must wait for the server, and can make IMAP servers feel much
+# more responsive. But not all servers correctly handle pipelined commands,
+# so if you have problems you might want to try setting this variable to 0.
+#
+# Note: Changes to this variable have no effect on open connections.
+#
+#
+# set imap_servernoise=yes
+#
+# Name: imap_servernoise
+# Type: boolean
+# Default: yes
+#
+#
+# When set, mutt will display warning messages from the IMAP
+# server as error messages. Since these messages are often
+# harmless, or generated due to configuration problems on the
+# server which are out of the users' hands, you may wish to suppress
+# them at some point.
+#
+#
+# set imap_user=""
+#
+# Name: imap_user
+# Type: string
+# Default: ""
+#
+#
+# The name of the user whose mail you intend to access on the IMAP
+# server.
+#
+# This variable defaults to your user name on the local machine.
+#
+#
+# set implicit_autoview=no
+#
+# Name: implicit_autoview
+# Type: boolean
+# Default: no
+#
+#
+# If set to ``yes'', mutt will look for a mailcap entry with the
+# ``copiousoutput'' flag set for every MIME attachment it doesn't have
+# an internal viewer defined for. If such an entry is found, mutt will
+# use the viewer defined in that entry to convert the body part to text
+# form.
+#
+#
+# set include=ask-yes
+#
+# Name: include
+# Type: quadoption
+# Default: ask-yes
+#
+#
+# Controls whether or not a copy of the message(s) you are replying to
+# is included in your reply.
+#
+#
+# set include_onlyfirst=no
+#
+# Name: include_onlyfirst
+# Type: boolean
+# Default: no
+#
+#
+# Controls whether or not Mutt includes only the first attachment
+# of the message you are replying.
+#
+#
+# set indent_string="> "
+#
+# Name: indent_string
+# Type: string
+# Default: "> "
+#
+#
+# Specifies the string to prepend to each line of text quoted in a
+# message to which you are replying. You are strongly encouraged not to
+# change this value, as it tends to agitate the more fanatical netizens.
+#
+# The value of this option is ignored if $text_flowed is set, too because
+# the quoting mechanism is strictly defined for format=flowed.
+#
+# This option is a format string, please see the description of
+# $index_format for supported printf(3)-style sequences.
+#
+#
+# set index_format="%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
+#
+# Name: index_format
+# Type: string
+# Default: "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
+#
+#
+# This variable allows you to customize the message index display to
+# your personal taste.
+#
+# ``Format strings'' are similar to the strings used in the C
+# function printf(3) to format output (see the man page for more details).
+# The following sequences are defined in Mutt:
+# %a address of the author
+# %A reply-to address (if present; otherwise: address of author)
+# %b filename of the original message folder (think mailbox)
+# %B the list to which the letter was sent, or else the folder name (%b).
+# %c number of characters (bytes) in the message
+# %C current message number
+# %d date and time of the message in the format specified by
+# $date_format converted to sender's time zone
+# %D date and time of the message in the format specified by
+# $date_format converted to the local time zone
+# %e current message number in thread
+# %E number of messages in current thread
+# %f sender (address + real name), either From: or Return-Path:
+# %F author name, or recipient name if the message is from you
+# %g newsgroup name (if compiled with nntp support)
+# %H spam attribute(s) of this message
+# %i message-id of the current message
+# %l number of lines in the message (does not work with maildir,
+# mh, and possibly IMAP folders)
+# %L If an address in the ``To:'' or ``Cc:'' header field matches an address
+# defined by the users ``subscribe'' command, this displays
+# "To <list-name>", otherwise the same as %F.
+# %m total number of message in the mailbox
+# %M number of hidden messages if the thread is collapsed.
+# %N message score
+# %n author's real name (or address if missing)
+# %O original save folder where mutt would formerly have
+# stashed the message: list name or recipient name
+# if not sent to a list
+# %P progress indicator for the built-in pager (how much of the file has been displayed)
+# %R ``x-comment-to:'' field (if present and compiled with nntp support)
+# %s subject of the message
+# %S status of the message (``N''/``D''/``d''/``!''/``r''/*)
+# %t ``To:'' field (recipients)
+# %T the appropriate character from the $to_chars string
+# %u user (login) name of the author
+# %v first name of the author, or the recipient if the message is from you
+# %W name of organization of author (``organization:'' field)
+# %X number of attachments
+# (please see the ``attachments'' section for possible speed effects)
+# %y ``X-Label:'' field, if present
+# %Y ``X-Label:'' field, if present, and (1) not at part of a thread tree,
+# (2) at the top of a thread, or (3) ``X-Label:'' is different from
+# preceding message's ``X-Label:''.
+# %Z message status flags
+# %{fmt} the date and time of the message is converted to sender's
+# time zone, and ``fmt'' is expanded by the library function
+# strftime(3); a leading bang disables locales
+# %[fmt] the date and time of the message is converted to the local
+# time zone, and ``fmt'' is expanded by the library function
+# strftime(3); a leading bang disables locales
+# %(fmt) the local date and time when the message was received.
+# ``fmt'' is expanded by the library function strftime(3);
+# a leading bang disables locales
+# %<fmt> the current local time. ``fmt'' is expanded by the library
+# function strftime(3); a leading bang disables locales.
+# %>X right justify the rest of the string and pad with character ``X''
+# %|X pad to the end of the line with character ``X''
+# %*X soft-fill with character ``X'' as pad
+#
+#
+# ``Soft-fill'' deserves some explanation: Normal right-justification
+# will print everything to the left of the ``%>'', displaying padding and
+# whatever lies to the right only if there's room. By contrast,
+# soft-fill gives priority to the right-hand side, guaranteeing space
+# to display it and showing padding only if there's still room. If
+# necessary, soft-fill will eat text leftwards to make room for
+# rightward text.
+#
+# Note that these expandos are supported in
+# ``save-hook'', ``fcc-hook'' and ``fcc-save-hook'', too.
+#
+#
+# set inews=""
+#
+# Name: inews
+# Type: path
+# Default: ""
+#
+#
+# If set, specifies the program and arguments used to deliver news posted
+# by Mutt. Otherwise, mutt posts article using current connection to
+# news server. The following printf-style sequence is understood:
+#
+# %s newsserver name
+#
+# Example: set inews="/usr/local/bin/inews -hS"
+#
+#
+# set ispell="ispell"
+#
+# Name: ispell
+# Type: path
+# Default: "ispell"
+#
+#
+# How to invoke ispell (GNU's spell-checking software).
+#
+#
+# set keep_flagged=no
+#
+# Name: keep_flagged
+# Type: boolean
+# Default: no
+#
+#
+# If set, read messages marked as flagged will not be moved
+# from your spool mailbox to your $mbox mailbox, or as a result of
+# a ``mbox-hook'' command.
+#
+#
+# set locale="C"
+#
+# Name: locale
+# Type: string
+# Default: "C"
+#
+#
+# The locale used by strftime(3) to format dates. Legal values are
+# the strings your system accepts for the locale environment variable $LC_TIME.
+#
+#
+# set mail_check=5
+#
+# Name: mail_check
+# Type: number
+# Default: 5
+#
+#
+# This variable configures how often (in seconds) mutt should look for
+# new mail. Also see the $timeout variable.
+#
+#
+# set mail_check_recent=yes
+#
+# Name: mail_check_recent
+# Type: boolean
+# Default: yes
+#
+#
+# When set, Mutt will only notify you about new mail that has been received
+# since the last time you opened the mailbox. When unset, Mutt will notify you
+# if any new mail exists in the mailbox, regardless of whether you have visited it
+# recently.
+#
+# When $mark_old is set, Mutt does not consider the mailbox to contain new
+# mail if only old messages exist.
+#
+#
+# set mailcap_path=""
+#
+# Name: mailcap_path
+# Type: string
+# Default: ""
+#
+#
+# This variable specifies which files to consult when attempting to
+# display MIME bodies not directly supported by Mutt.
+#
+#
+# set mailcap_sanitize=yes
+#
+# Name: mailcap_sanitize
+# Type: boolean
+# Default: yes
+#
+#
+# If set, mutt will restrict possible characters in mailcap % expandos
+# to a well-defined set of safe characters. This is the safe setting,
+# but we are not sure it doesn't break some more advanced MIME stuff.
+#
+# DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE
+# DOING!
+#
+#
+# set maildir_header_cache_verify=yes
+#
+# Name: maildir_header_cache_verify
+# Type: boolean
+# Default: yes
+#
+#
+# Check for Maildir unaware programs other than mutt having modified maildir
+# files when the header cache is in use. This incurs one stat(2) per
+# message every time the folder is opened (which can be very slow for NFS
+# folders).
+#
+#
+# set maildir_trash=no
+#
+# Name: maildir_trash
+# Type: boolean
+# Default: no
+#
+#
+# If set, messages marked as deleted will be saved with the maildir
+# trashed flag instead of unlinked. Note: this only applies
+# to maildir-style mailboxes. Setting it will have no effect on other
+# mailbox types.
+#
+#
+# set mark_old=yes
+#
+# Name: mark_old
+# Type: boolean
+# Default: yes
+#
+#
+# Controls whether or not mutt marks new unread
+# messages as old if you exit a mailbox without reading them.
+# With this option set, the next time you start mutt, the messages
+# will show up with an ``O'' next to them in the index menu,
+# indicating that they are old.
+#
+#
+# set markers=yes
+#
+# Name: markers
+# Type: boolean
+# Default: yes
+#
+#
+# Controls the display of wrapped lines in the internal pager. If set, a
+# ``+'' marker is displayed at the beginning of wrapped lines.
+#
+# Also see the $smart_wrap variable.
+#
+#
+# set mask="!^\\.[^.]"
+#
+# Name: mask
+# Type: regular expression
+# Default: "!^\\.[^.]"
+#
+#
+# A regular expression used in the file browser, optionally preceded by
+# the not operator ``!''. Only files whose names match this mask
+# will be shown. The match is always case-sensitive.
+#
+#
+# set mbox="~/mbox"
+#
+# Name: mbox
+# Type: path
+# Default: "~/mbox"
+#
+#
+# This specifies the folder into which read mail in your $spoolfile
+# folder will be appended.
+#
+# Also see the $move variable.
+#
+#
+# set mbox_type=mbox
+#
+# Name: mbox_type
+# Type: folder magic
+# Default: mbox
+#
+#
+# The default mailbox type used when creating new folders. May be any of
+# ``mbox'', ``MMDF'', ``MH'' and ``Maildir''. This is overridden by the
+# -m command-line option.
+#
+#
+# set menu_context=0
+#
+# Name: menu_context
+# Type: number
+# Default: 0
+#
+#
+# This variable controls the number of lines of context that are given
+# when scrolling through menus. (Similar to $pager_context.)
+#
+#
+# set menu_move_off=yes
+#
+# Name: menu_move_off
+# Type: boolean
+# Default: yes
+#
+#
+# When unset, the bottom entry of menus will never scroll up past
+# the bottom of the screen, unless there are less entries than lines.
+# When set, the bottom entry may move off the bottom.
+#
+#
+# set menu_scroll=no
+#
+# Name: menu_scroll
+# Type: boolean
+# Default: no
+#
+#
+# When set, menus will be scrolled up or down one line when you
+# attempt to move across a screen boundary. If unset, the screen
+# is cleared and the next or previous page of the menu is displayed
+# (useful for slow links to avoid many redraws).
+#
+#
+# set message_cache_clean=no
+#
+# Name: message_cache_clean
+# Type: boolean
+# Default: no
+#
+#
+# If set, mutt will clean out obsolete entries from the message cache when
+# the mailbox is synchronized. You probably only want to set it
+# every once in a while, since it can be a little slow
+# (especially for large folders).
+#
+#
+# set message_cachedir=""
+#
+# Name: message_cachedir
+# Type: path
+# Default: ""
+#
+#
+# Set this to a directory and mutt will cache copies of messages from
+# your IMAP and POP servers here. You are free to remove entries at any
+# time.
+#
+# When setting this variable to a directory, mutt needs to fetch every
+# remote message only once and can perform regular expression searches
+# as fast as for local folders.
+#
+# Also see the $message_cache_clean variable.
+#
+#
+# set message_format="%s"
+#
+# Name: message_format
+# Type: string
+# Default: "%s"
+#
+#
+# This is the string displayed in the ``attachment'' menu for
+# attachments of type message/rfc822. For a full listing of defined
+# printf(3)-like sequences see the section on $index_format.
+#
+#
+# set meta_key=no
+#
+# Name: meta_key
+# Type: boolean
+# Default: no
+#
+#
+# If set, forces Mutt to interpret keystrokes with the high bit (bit 8)
+# set as if the user had pressed the Esc key and whatever key remains
+# after having the high bit removed. For example, if the key pressed
+# has an ASCII value of 0xf8, then this is treated as if the user had
+# pressed Esc then ``x''. This is because the result of removing the
+# high bit from 0xf8 is 0x78, which is the ASCII character
+# ``x''.
+#
+#
+# set metoo=no
+#
+# Name: metoo
+# Type: boolean
+# Default: no
+#
+#
+# If unset, Mutt will remove your address (see the ``alternates''
+# command) from the list of recipients when replying to a message.
+#
+#
+# set mh_purge=no
+#
+# Name: mh_purge
+# Type: boolean
+# Default: no
+#
+#
+# When unset, mutt will mimic mh's behavior and rename deleted messages
+# to ,<old file name> in mh folders instead of really deleting
+# them. This leaves the message on disk but makes programs reading the folder
+# ignore it. If the variable is set, the message files will simply be
+# deleted.
+#
+# This option is similar to $maildir_trash for Maildir folders.
+#
+#
+# set mh_seq_flagged="flagged"
+#
+# Name: mh_seq_flagged
+# Type: string
+# Default: "flagged"
+#
+#
+# The name of the MH sequence used for flagged messages.
+#
+#
+# set mh_seq_replied="replied"
+#
+# Name: mh_seq_replied
+# Type: string
+# Default: "replied"
+#
+#
+# The name of the MH sequence used to tag replied messages.
+#
+#
+# set mh_seq_unseen="unseen"
+#
+# Name: mh_seq_unseen
+# Type: string
+# Default: "unseen"
+#
+#
+# The name of the MH sequence used for unseen messages.
+#
+#
+# set mime_forward=no
+#
+# Name: mime_forward
+# Type: quadoption
+# Default: no
+#
+#
+# When set, the message you are forwarding will be attached as a
+# separate message/rfc822 MIME part instead of included in the main body of the
+# message. This is useful for forwarding MIME messages so the receiver
+# can properly view the message as it was delivered to you. If you like
+# to switch between MIME and not MIME from mail to mail, set this
+# variable to ``ask-no'' or ``ask-yes''.
+#
+# Also see $forward_decode and $mime_forward_decode.
+#
+#
+# set mime_forward_decode=no
+#
+# Name: mime_forward_decode
+# Type: boolean
+# Default: no
+#
+#
+# Controls the decoding of complex MIME messages into text/plain when
+# forwarding a message while $mime_forward is set. Otherwise
+# $forward_decode is used instead.
+#
+#
+# set mime_forward_rest=yes
+#
+# Name: mime_forward_rest
+# Type: quadoption
+# Default: yes
+#
+#
+# When forwarding multiple attachments of a MIME message from the attachment
+# menu, attachments which cannot be decoded in a reasonable manner will
+# be attached to the newly composed message if this option is set.
+#
+#
+# set mime_subject=yes
+#
+# Name: mime_subject
+# Type: boolean
+# Default: yes
+#
+#
+# If unset, 8-bit ``subject:'' line in article header will not be
+# encoded according to RFC2047 to base64. This is useful when message
+# is Usenet article, because MIME for news is nonstandard feature.
+#
+#
+# set mix_entry_format="%4n %c %-16s %a"
+#
+# Name: mix_entry_format
+# Type: string
+# Default: "%4n %c %-16s %a"
+#
+#
+# This variable describes the format of a remailer line on the mixmaster
+# chain selection screen. The following printf(3)-like sequences are
+# supported:
+# %n The running number on the menu.
+# %c Remailer capabilities.
+# %s The remailer's short name.
+# %a The remailer's e-mail address.
+#
+#
+# set mixmaster="mixmaster"
+#
+# Name: mixmaster
+# Type: path
+# Default: "mixmaster"
+#
+#
+# This variable contains the path to the Mixmaster binary on your
+# system. It is used with various sets of parameters to gather the
+# list of known remailers, and to finally send a message through the
+# mixmaster chain.
+#
+#
+# set move=no
+#
+# Name: move
+# Type: quadoption
+# Default: no
+#
+#
+# Controls whether or not Mutt will move read messages
+# from your spool mailbox to your $mbox mailbox, or as a result of
+# a ``mbox-hook'' command.
+#
+#
+# set narrow_tree=no
+#
+# Name: narrow_tree
+# Type: boolean
+# Default: no
+#
+#
+# This variable, when set, makes the thread tree narrower, allowing
+# deeper threads to fit on the screen.
+#
+#
+# set net_inc=10
+#
+# Name: net_inc
+# Type: number
+# Default: 10
+#
+#
+# Operations that expect to transfer a large amount of data over the
+# network will update their progress every $net_inc kilobytes.
+# If set to 0, no progress messages will be displayed.
+#
+# See also $read_inc, $write_inc and $net_inc.
+#
+#
+# set news_cache_dir="~/.mutt"
+#
+# Name: news_cache_dir
+# Type: path
+# Default: "~/.mutt"
+#
+#
+# This variable pointing to directory where Mutt will save cached news
+# articles headers in. If unset, headers will not be saved at all
+# and will be reloaded each time when you enter to newsgroup.
+#
+#
+# set news_server=""
+#
+# Name: news_server
+# Type: string
+# Default: ""
+#
+#
+# This variable specifies domain name or address of NNTP server. It
+# defaults to the newsserver specified in the environment variable
+# $NNTPSERVER or contained in the file /etc/nntpserver. You can also
+# specify username and an alternative port for each newsserver, ie:
+#
+# [news[s]://][username[:password]@]newsserver[:port]
+#
+#
+# set newsrc="~/.newsrc"
+#
+# Name: newsrc
+# Type: path
+# Default: "~/.newsrc"
+#
+#
+# The file, containing info about subscribed newsgroups - names and
+# indexes of read articles. The following printf-style sequence
+# is understood:
+#
+# %s newsserver name
+#
+#
+# set nntp_context=1000
+#
+# Name: nntp_context
+# Type: number
+# Default: 1000
+#
+#
+# This variable defines number of articles which will be in index when
+# newsgroup entered. If active newsgroup have more articles than this
+# number, oldest articles will be ignored. Also controls how many
+# articles headers will be saved in cache when you quit newsgroup.
+#
+#
+# set nntp_load_description=yes
+#
+# Name: nntp_load_description
+# Type: boolean
+# Default: yes
+#
+#
+# This variable controls whether or not descriptions for each newsgroup
+# must be loaded when newsgroup is added to list (first time list
+# loading or new newsgroup adding).
+#
+#
+# set nntp_user=""
+#
+# Name: nntp_user
+# Type: string
+# Default: ""
+#
+#
+# Your login name on the NNTP server. If unset and NNTP server requires
+# authentification, Mutt will prompt you for your account name when you
+# connect to newsserver.
+#
+#
+# set nntp_pass=""
+#
+# Name: nntp_pass
+# Type: string
+# Default: ""
+#
+#
+# Your password for NNTP account.
+#
+#
+# set nntp_poll=60
+#
+# Name: nntp_poll
+# Type: number
+# Default: 60
+#
+#
+# The time in seconds until any operations on newsgroup except post new
+# article will cause recheck for new news. If set to 0, Mutt will
+# recheck newsgroup on each operation in index (stepping, read article,
+# etc.).
+#
+#
+# set nntp_reconnect=ask-yes
+#
+# Name: nntp_reconnect
+# Type: quadoption
+# Default: ask-yes
+#
+#
+# Controls whether or not Mutt will try to reconnect to newsserver when
+# connection lost.
+#
+#
+# set pager="builtin"
+#
+# Name: pager
+# Type: path
+# Default: "builtin"
+#
+#
+# This variable specifies which pager you would like to use to view
+# messages. The value ``builtin'' means to use the built-in pager, otherwise this
+# variable should specify the pathname of the external pager you would
+# like to use.
+#
+# Using an external pager may have some disadvantages: Additional
+# keystrokes are necessary because you can't call mutt functions
+# directly from the pager, and screen resizes cause lines longer than
+# the screen width to be badly formatted in the help menu.
+#
+#
+# set pager_context=0
+#
+# Name: pager_context
+# Type: number
+# Default: 0
+#
+#
+# This variable controls the number of lines of context that are given
+# when displaying the next or previous page in the internal pager. By
+# default, Mutt will display the line after the last one on the screen
+# at the top of the next page (0 lines of context).
+#
+# This variable also specifies the amount of context given for search
+# results. If positive, this many lines will be given before a match,
+# if 0, the match will be top-aligned.
+#
+#
+# set pager_format="-%Z- %C/%m: %-20.20n %s%* -- (%P)"
+#
+# Name: pager_format
+# Type: string
+# Default: "-%Z- %C/%m: %-20.20n %s%* -- (%P)"
+#
+#
+# This variable controls the format of the one-line message ``status''
+# displayed before each message in either the internal or an external
+# pager. The valid sequences are listed in the $index_format
+# section.
+#
+#
+# set pager_index_lines=0
+#
+# Name: pager_index_lines
+# Type: number
+# Default: 0
+#
+#
+# Determines the number of lines of a mini-index which is shown when in
+# the pager. The current message, unless near the top or bottom of the
+# folder, will be roughly one third of the way down this mini-index,
+# giving the reader the context of a few messages before and after the
+# message. This is useful, for example, to determine how many messages
+# remain to be read in the current thread. One of the lines is reserved
+# for the status bar from the index, so a setting of 6
+# will only show 5 lines of the actual index. A value of 0 results in
+# no index being shown. If the number of messages in the current folder
+# is less than $pager_index_lines, then the index will only use as
+# many lines as it needs.
+#
+#
+# set pager_stop=no
+#
+# Name: pager_stop
+# Type: boolean
+# Default: no
+#
+#
+# When set, the internal-pager will not move to the next message
+# when you are at the end of a message and invoke the <next-page>
+# function.
+#
+#
+# set pgp_auto_decode=no
+#
+# Name: pgp_auto_decode
+# Type: boolean
+# Default: no
+#
+#
+# If set, mutt will automatically attempt to decrypt traditional PGP
+# messages whenever the user performs an operation which ordinarily would
+# result in the contents of the message being operated on. For example,
+# if the user displays a pgp-traditional message which has not been manually
+# checked with the <check-traditional-pgp> function, mutt will automatically
+# check the message for traditional pgp.
+#
+#
+# set pgp_autoinline=no
+#
+# Name: pgp_autoinline
+# Type: boolean
+# Default: no
+#
+#
+# This option controls whether Mutt generates old-style inline
+# (traditional) PGP encrypted or signed messages under certain
+# circumstances. This can be overridden by use of the pgp menu,
+# when inline is not required.
+#
+# Note that Mutt might automatically use PGP/MIME for messages
+# which consist of more than a single MIME part. Mutt can be
+# configured to ask before sending PGP/MIME messages when inline
+# (traditional) would not work.
+#
+# Also see the $pgp_mime_auto variable.
+#
+# Also note that using the old-style PGP message format is strongly
+# deprecated.
+# (PGP only)
+#
+#
+# set pgp_check_exit=yes
+#
+# Name: pgp_check_exit
+# Type: boolean
+# Default: yes
+#
+#
+# If set, mutt will check the exit code of the PGP subprocess when
+# signing or encrypting. A non-zero exit code means that the
+# subprocess failed.
+# (PGP only)
+#
+#
+# set pgp_clearsign_command=""
+#
+# Name: pgp_clearsign_command
+# Type: string
+# Default: ""
+#
+#
+# This format is used to create an old-style ``clearsigned'' PGP
+# message. Note that the use of this format is strongly
+# deprecated.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
+#
+#
+# set pgp_decode_command=""
+#
+# Name: pgp_decode_command
+# Type: string
+# Default: ""
+#
+#
+# This format strings specifies a command which is used to decode
+# application/pgp attachments.
+#
+# The PGP command formats have their own set of printf(3)-like sequences:
+# %p Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty
+# string otherwise. Note: This may be used with a %? construct.
+# %f Expands to the name of a file containing a message.
+# %s Expands to the name of a file containing the signature part
+# of a multipart/signed attachment when verifying it.
+# %a The value of $pgp_sign_as.
+# %r One or more key IDs.
+#
+#
+# For examples on how to configure these formats for the various versions
+# of PGP which are floating around, see the pgp and gpg sample configuration files in
+# the samples/ subdirectory which has been installed on your system
+# alongside the documentation.
+# (PGP only)
+#
+#
+# set pgp_decrypt_command=""
+#
+# Name: pgp_decrypt_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to decrypt a PGP encrypted message.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
+#
+#
+# set pgp_encrypt_only_command=""
+#
+# Name: pgp_encrypt_only_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to encrypt a body part without signing it.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
+#
+#
+# set pgp_encrypt_sign_command=""
+#
+# Name: pgp_encrypt_sign_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to both sign and encrypt a body part.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
+#
+#
+# set pgp_entry_format="%4n %t%f %4l/0x%k %-4a %2c %u"
+#
+# Name: pgp_entry_format
+# Type: string
+# Default: "%4n %t%f %4l/0x%k %-4a %2c %u"
+#
+#
+# This variable allows you to customize the PGP key selection menu to
+# your personal taste. This string is similar to $index_format, but
+# has its own set of printf(3)-like sequences:
+# %n number
+# %k key id
+# %u user id
+# %a algorithm
+# %l key length
+# %f flags
+# %c capabilities
+# %t trust/validity of the key-uid association
+# %[<s>] date of the key where <s> is an strftime(3) expression
+#
+#
+# (PGP only)
+#
+#
+# set pgp_export_command=""
+#
+# Name: pgp_export_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to export a public key from the user's
+# key ring.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
+#
+#
+# set pgp_getkeys_command=""
+#
+# Name: pgp_getkeys_command
+# Type: string
+# Default: ""
+#
+#
+# This command is invoked whenever mutt will need public key information.
+# Of the sequences supported by $pgp_decode_command, %r is the only
+# printf(3)-like sequence used with this format.
+# (PGP only)
+#
+#
+# set pgp_good_sign=""
+#
+# Name: pgp_good_sign
+# Type: regular expression
+# Default: ""
+#
+#
+# If you assign a text to this variable, then a PGP signature is only
+# considered verified if the output from $pgp_verify_command contains
+# the text. Use this variable if the exit code from the command is 0
+# even for bad signatures.
+# (PGP only)
+#
+#
+# set pgp_ignore_subkeys=yes
+#
+# Name: pgp_ignore_subkeys
+# Type: boolean
+# Default: yes
+#
+#
+# Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead,
+# the principal key will inherit the subkeys' capabilities. Unset this
+# if you want to play interesting key selection games.
+# (PGP only)
+#
+#
+# set pgp_import_command=""
+#
+# Name: pgp_import_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to import a key from a message into
+# the user's public key ring.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
+#
+#
+# set pgp_list_pubring_command=""
+#
+# Name: pgp_list_pubring_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to list the public key ring's contents. The
+# output format must be analogous to the one used by
+# gpg --list-keys --with-colons.
+#
+# This format is also generated by the pgpring utility which comes
+# with mutt.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
+#
+#
+# set pgp_list_secring_command=""
+#
+# Name: pgp_list_secring_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to list the secret key ring's contents. The
+# output format must be analogous to the one used by:
+# gpg --list-keys --with-colons.
+#
+# This format is also generated by the pgpring utility which comes
+# with mutt.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
+#
+#
+# set pgp_long_ids=no
+#
+# Name: pgp_long_ids
+# Type: boolean
+# Default: no
+#
+#
+# If set, use 64 bit PGP key IDs, if unset use the normal 32 bit key IDs.
+# (PGP only)
+#
+#
+# set pgp_mime_auto=ask-yes
+#
+# Name: pgp_mime_auto
+# Type: quadoption
+# Default: ask-yes
+#
+#
+# This option controls whether Mutt will prompt you for
+# automatically sending a (signed/encrypted) message using
+# PGP/MIME when inline (traditional) fails (for any reason).
+#
+# Also note that using the old-style PGP message format is strongly
+# deprecated.
+# (PGP only)
+#
+#
+# set pgp_replyinline=no
+#
+# Name: pgp_replyinline
+# Type: boolean
+# Default: no
+#
+#
+# Setting this variable will cause Mutt to always attempt to
+# create an inline (traditional) message when replying to a
+# message which is PGP encrypted/signed inline. This can be
+# overridden by use of the pgp menu, when inline is not
+# required. This option does not automatically detect if the
+# (replied-to) message is inline; instead it relies on Mutt
+# internals for previously checked/flagged messages.
+#
+# Note that Mutt might automatically use PGP/MIME for messages
+# which consist of more than a single MIME part. Mutt can be
+# configured to ask before sending PGP/MIME messages when inline
+# (traditional) would not work.
+#
+# Also see the $pgp_mime_auto variable.
+#
+# Also note that using the old-style PGP message format is strongly
+# deprecated.
+# (PGP only)
+#
+#
+# set pgp_retainable_sigs=no
+#
+# Name: pgp_retainable_sigs
+# Type: boolean
+# Default: no
+#
+#
+# If set, signed and encrypted messages will consist of nested
+# multipart/signed and multipart/encrypted body parts.
+#
+# This is useful for applications like encrypted and signed mailing
+# lists, where the outer layer (multipart/encrypted) can be easily
+# removed, while the inner multipart/signed part is retained.
+# (PGP only)
+#
+#
+# set pgp_show_unusable=yes
+#
+# Name: pgp_show_unusable
+# Type: boolean
+# Default: yes
+#
+#
+# If set, mutt will display non-usable keys on the PGP key selection
+# menu. This includes keys which have been revoked, have expired, or
+# have been marked as ``disabled'' by the user.
+# (PGP only)
+#
+#
+# set pgp_sign_as=""
+#
+# Name: pgp_sign_as
+# Type: string
+# Default: ""
+#
+#
+# If you have more than one key pair, this option allows you to specify
+# which of your private keys to use. It is recommended that you use the
+# keyid form to specify your key (e.g. 0x00112233).
+# (PGP only)
+#
+#
+# set pgp_sign_command=""
+#
+# Name: pgp_sign_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to create the detached PGP signature for a
+# multipart/signed PGP/MIME body part.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
+#
+#
+# set pgp_sort_keys=address
+#
+# Name: pgp_sort_keys
+# Type: sort order
+# Default: address
+#
+#
+# Specifies how the entries in the pgp menu are sorted. The
+# following are legal values:
+# address sort alphabetically by user id
+# keyid sort alphabetically by key id
+# date sort by key creation date
+# trust sort by the trust of the key
+#
+#
+# If you prefer reverse order of the above values, prefix it with
+# ``reverse-''.
+# (PGP only)
+#
+#
+# set pgp_strict_enc=yes
+#
+# Name: pgp_strict_enc
+# Type: boolean
+# Default: yes
+#
+#
+# If set, Mutt will automatically encode PGP/MIME signed messages as
+# quoted-printable. Please note that unsetting this variable may
+# lead to problems with non-verifyable PGP signatures, so only change
+# this if you know what you are doing.
+# (PGP only)
+#
+#
+# set pgp_timeout=300
+#
+# Name: pgp_timeout
+# Type: number
+# Default: 300
+#
+#
+# The number of seconds after which a cached passphrase will expire if
+# not used.
+# (PGP only)
+#
+#
+# set sidebar_delim="|"
+#
+# Name: sidebar_delim
+# Type: string
+# Default: "|"
+#
+#
+# This specifies the delimiter between the sidebar (if visible) and
+# other screens.
+#
+#
+# set sidebar_visible=no
+#
+# Name: sidebar_visible
+# Type: boolean
+# Default: no
+#
+#
+# This specifies whether or not to show sidebar (left-side list of folders).
+#
+#
+# set sidebar_width=0
+#
+# Name: sidebar_width
+# Type: number
+# Default: 0
+#
+#
+# The width of the sidebar.
+#
+#
+# set pgp_use_gpg_agent=no
+#
+# Name: pgp_use_gpg_agent
+# Type: boolean
+# Default: no
+#
+#
+# If set, mutt will use a possibly-running gpg-agent(1) process.
+# (PGP only)
+#
+#
+# set pgp_verify_command=""
+#
+# Name: pgp_verify_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to verify PGP signatures.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
+#
+#
+# set pgp_verify_key_command=""
+#
+# Name: pgp_verify_key_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to verify key information from the key selection
+# menu.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
+#
+#
+# set pipe_decode=no
+#
+# Name: pipe_decode
+# Type: boolean
+# Default: no
+#
+#
+# Used in connection with the <pipe-message> command. When unset,
+# Mutt will pipe the messages without any preprocessing. When set, Mutt
+# will weed headers and will attempt to decode the messages
+# first.
+#
+#
+# set pipe_sep="\n"
+#
+# Name: pipe_sep
+# Type: string
+# Default: "\n"
+#
+#
+# The separator to add between messages when piping a list of tagged
+# messages to an external Unix command.
+#
+#
+# set pipe_split=no
+#
+# Name: pipe_split
+# Type: boolean
+# Default: no
+#
+#
+# Used in connection with the <pipe-message> function following
+# <tag-prefix>. If this variable is unset, when piping a list of
+# tagged messages Mutt will concatenate the messages and will pipe them
+# all concatenated. When set, Mutt will pipe the messages one by one.
+# In both cases the messages are piped in the current sorted order,
+# and the $pipe_sep separator is added after each message.
+#
+#
+# set pop_auth_try_all=yes
+#
+# Name: pop_auth_try_all
+# Type: boolean
+# Default: yes
+#
+#
+# If set, Mutt will try all available authentication methods.
+# When unset, Mutt will only fall back to other authentication
+# methods if the previous methods are unavailable. If a method is
+# available but authentication fails, Mutt will not connect to the POP server.
+#
+#
+# set pop_authenticators=""
+#
+# Name: pop_authenticators
+# Type: string
+# Default: ""
+#
+#
+# This is a colon-delimited list of authentication methods mutt may
+# attempt to use to log in to an POP server, in the order mutt should
+# try them. Authentication methods are either ``user'', ``apop'' or any
+# SASL mechanism, e.g. ``digest-md5'', ``gssapi'' or ``cram-md5''.
+# This option is case-insensitive. If this option is unset
+# (the default) mutt will try all available methods, in order from
+# most-secure to least-secure.
+#
+# Example:
+# set pop_authenticators="digest-md5:apop:user"
+#
+#
+# set pop_checkinterval=60
+#
+# Name: pop_checkinterval
+# Type: number
+# Default: 60
+#
+#
+# This variable configures how often (in seconds) mutt should look for
+# new mail in the currently selected mailbox if it is a POP mailbox.
+#
+#
+# set pop_delete=ask-no
+#
+# Name: pop_delete
+# Type: quadoption
+# Default: ask-no
+#
+#
+# If set, Mutt will delete successfully downloaded messages from the POP
+# server when using the <fetch-mail> function. When unset, Mutt will
+# download messages but also leave them on the POP server.
+#
+#
+# set pop_host=""
+#
+# Name: pop_host
+# Type: string
+# Default: ""
+#
+#
+# The name of your POP server for the <fetch-mail> function. You
+# can also specify an alternative port, username and password, i.e.:
+# [pop[s]://][username[:password]@]popserver[:port]
+#
+# where ``[...]'' denotes an optional part.
+#
+#
+# set pop_last=no
+#
+# Name: pop_last
+# Type: boolean
+# Default: no
+#
+#
+# If this variable is set, mutt will try to use the ``LAST'' POP command
+# for retrieving only unread messages from the POP server when using
+# the <fetch-mail> function.
+#
+#
+# set pop_pass=""
+#
+# Name: pop_pass
+# Type: string
+# Default: ""
+#
+#
+# Specifies the password for your POP account. If unset, Mutt will
+# prompt you for your password when you open a POP mailbox.
+#
+# Warning: you should only use this option when you are on a
+# fairly secure machine, because the superuser can read your muttrc
+# even if you are the only one who can read the file.
+#
+#
+# set pop_reconnect=ask-yes
+#
+# Name: pop_reconnect
+# Type: quadoption
+# Default: ask-yes
+#
+#
+# Controls whether or not Mutt will try to reconnect to the POP server if
+# the connection is lost.
+#
+#
+# set pop_user=""
+#
+# Name: pop_user
+# Type: string
+# Default: ""
+#
+#
+# Your login name on the POP server.
+#
+# This variable defaults to your user name on the local machine.
+#
+#
+# set post_indent_string=""
+#
+# Name: post_indent_string
+# Type: string
+# Default: ""
+#
+#
+# Similar to the $attribution variable, Mutt will append this
+# string after the inclusion of a message which is being replied to.
+#
+#
+# set post_moderated=ask-yes
+#
+# Name: post_moderated
+# Type: quadoption
+# Default: ask-yes
+#
+#
+# If set to yes, Mutt will post article to newsgroup that have
+# not permissions to posting (e.g. moderated). Note: if newsserver
+# does not support posting to that newsgroup or totally read-only, that
+# posting will not have an effect.
+#
+#
+# set postpone=ask-yes
+#
+# Name: postpone
+# Type: quadoption
+# Default: ask-yes
+#
+#
+# Controls whether or not messages are saved in the $postponed
+# mailbox when you elect not to send immediately.
+#
+# Also see the $recall variable.
+#
+#
+# set postponed="~/postponed"
+#
+# Name: postponed
+# Type: path
+# Default: "~/postponed"
+#
+#
+# Mutt allows you to indefinitely ``postpone sending a message'' which
+# you are editing. When you choose to postpone a message, Mutt saves it
+# in the mailbox specified by this variable.
+#
+# Also see the $postpone variable.
+#
+#
+# set preconnect=""
+#
+# Name: preconnect
+# Type: string
+# Default: ""
+#
+#
+# If set, a shell command to be executed if mutt fails to establish
+# a connection to the server. This is useful for setting up secure
+# connections, e.g. with ssh(1). If the command returns a nonzero
+# status, mutt gives up opening the server. Example:
+# set preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net \
+# sleep 20 < /dev/null > /dev/null"
+#
+# Mailbox ``foo'' on ``mailhost.net'' can now be reached
+# as ``{localhost:1234}foo''.
+#
+# Note: For this example to work, you must be able to log in to the
+# remote machine without having to enter a password.
+#
+#
+# set print=ask-no
+#
+# Name: print
+# Type: quadoption
+# Default: ask-no
+#
+#
+# Controls whether or not Mutt really prints messages.
+# This is set to ``ask-no'' by default, because some people
+# accidentally hit ``p'' often.
+#
+#
+# set print_command="lpr"
+#
+# Name: print_command
+# Type: path
+# Default: "lpr"
+#
+#
+# This specifies the command pipe that should be used to print messages.
+#
+#
+# set print_decode=yes
+#
+# Name: print_decode
+# Type: boolean
+# Default: yes
+#
+#
+# Used in connection with the <print-message> command. If this
+# option is set, the message is decoded before it is passed to the
+# external command specified by $print_command. If this option
+# is unset, no processing will be applied to the message when
+# printing it. The latter setting may be useful if you are using
+# some advanced printer filter which is able to properly format
+# e-mail messages for printing.
+#
+#
+# set print_split=no
+#
+# Name: print_split
+# Type: boolean
+# Default: no
+#
+#
+# Used in connection with the <print-message> command. If this option
+# is set, the command specified by $print_command is executed once for
+# each message which is to be printed. If this option is unset,
+# the command specified by $print_command is executed only once, and
+# all the messages are concatenated, with a form feed as the message
+# separator.
+#
+# Those who use the enscript(1) program's mail-printing mode will
+# most likely want to set this option.
+#
+#
+# set prompt_after=yes
+#
+# Name: prompt_after
+# Type: boolean
+# Default: yes
+#
+#
+# If you use an external $pager, setting this variable will
+# cause Mutt to prompt you for a command when the pager exits rather
+# than returning to the index menu. If unset, Mutt will return to the
+# index menu when the external pager exits.
+#
+#
+# set query_command=""
+#
+# Name: query_command
+# Type: path
+# Default: ""
+#
+#
+# This specifies the command Mutt will use to make external address
+# queries. The string may contain a ``%s'', which will be substituted
+# with the query string the user types. Mutt will add quotes around the
+# string substituted for ``%s'' automatically according to shell quoting
+# rules, so you should avoid adding your own. If no ``%s'' is found in
+# the string, Mutt will append the user's query to the end of the string.
+# See ``query'' for more information.
+#
+#
+# set query_format="%4c %t %-25.25a %-25.25n %?e?(%e)?"
+#
+# Name: query_format
+# Type: string
+# Default: "%4c %t %-25.25a %-25.25n %?e?(%e)?"
+#
+#
+# This variable describes the format of the ``query'' menu. The
+# following printf(3)-style sequences are understood:
+# %a destination address
+# %c current entry number
+# %e extra information *
+# %n destination name
+# %t ``*'' if current entry is tagged, a space otherwise
+# %>X right justify the rest of the string and pad with ``X''
+# %|X pad to the end of the line with ``X''
+# %*X soft-fill with character ``X'' as pad
+#
+#
+# For an explanation of ``soft-fill'', see the $index_format documentation.
+#
+# * = can be optionally printed if nonzero, see the $status_format documentation.
+#
+#
+# set quit=yes
+#
+# Name: quit
+# Type: quadoption
+# Default: yes
+#
+#
+# This variable controls whether ``quit'' and ``exit'' actually quit
+# from mutt. If this option is set, they do quit, if it is unset, they
+# have no effect, and if it is set to ask-yes or ask-no, you are
+# prompted for confirmation when you try to quit.
+#
+#
+# set quote_empty=yes
+#
+# Name: quote_empty
+# Type: boolean
+# Default: yes
+#
+#
+# Controls whether or not empty lines will be quoted using
+# ``indent_string''.
+#
+#
+# set quote_quoted=no
+#
+# Name: quote_quoted
+# Type: boolean
+# Default: no
+#
+#
+# Controls how quoted lines will be quoted. If set, one quote
+# character will be added to the end of existing prefix. Otherwise,
+# quoted lines will be prepended by ``indent_string''.
+#
+#
+# set quote_regexp="^([ \t]*[|>:}#])+"
+#
+# Name: quote_regexp
+# Type: regular expression
+# Default: "^([ \t]*[|>:}#])+"
+#
+#
+# A regular expression used in the internal pager to determine quoted
+# sections of text in the body of a message. Quoted text may be filtered
+# out using the <toggle-quoted> command, or colored according to the
+# ``color quoted'' family of directives.
+#
+# Higher levels of quoting may be colored differently (``color quoted1'',
+# ``color quoted2'', etc.). The quoting level is determined by removing
+# the last character from the matched text and recursively reapplying
+# the regular expression until it fails to produce a match.
+#
+# Match detection may be overridden by the $smileys regular expression.
+#
+#
+# set read_inc=10
+#
+# Name: read_inc
+# Type: number
+# Default: 10
+#
+#
+# If set to a value greater than 0, Mutt will display which message it
+# is currently on when reading a mailbox or when performing search actions
+# such as search and limit. The message is printed after
+# this many messages have been read or searched (e.g., if set to 25, Mutt will
+# print a message when it is at message 25, and then again when it gets
+# to message 50). This variable is meant to indicate progress when
+# reading or searching large mailboxes which may take some time.
+# When set to 0, only a single message will appear before the reading
+# the mailbox.
+#
+# Also see the $write_inc, $net_inc and $time_inc variables and the
+# ``tuning'' section of the manual for performance considerations.
+#
+#
+# set read_only=no
+#
+# Name: read_only
+# Type: boolean
+# Default: no
+#
+#
+# If set, all folders are opened in read-only mode.
+#
+#
+# set realname=""
+#
+# Name: realname
+# Type: string
+# Default: ""
+#
+#
+# This variable specifies what ``real'' or ``personal'' name should be used
+# when sending messages.
+#
+# By default, this is the GECOS field from /etc/passwd. Note that this
+# variable will not be used when the user has set a real name
+# in the $from variable.
+#
+#
+# set recall=ask-yes
+#
+# Name: recall
+# Type: quadoption
+# Default: ask-yes
+#
+#
+# Controls whether or not Mutt recalls postponed messages
+# when composing a new message.
+#
+# Setting this variable to is not generally useful, and thus not
+# recommended.
+#
+# Also see $postponed variable.
+#
+#
+# set record="~/sent"
+#
+# Name: record
+# Type: path
+# Default: "~/sent"
+#
+#
+# This specifies the file into which your outgoing messages should be
+# appended. (This is meant as the primary method for saving a copy of
+# your messages, but another way to do this is using the ``my_hdr''
+# command to create a ``Bcc:'' field with your email address in it.)
+#
+# The value of $record is overridden by the $force_name and
+# $save_name variables, and the ``fcc-hook'' command.
+#
+#
+# set reply_regexp="^(re([\\[0-9\\]+])*|aw):[ \t]*"
+#
+# Name: reply_regexp
+# Type: regular expression
+# Default: "^(re([\\[0-9\\]+])*|aw):[ \t]*"
+#
+#
+# A regular expression used to recognize reply messages when threading
+# and replying. The default value corresponds to the English "Re:" and
+# the German "Aw:".
+#
+#
+# set reply_self=no
+#
+# Name: reply_self
+# Type: boolean
+# Default: no
+#
+#
+# If unset and you are replying to a message sent by you, Mutt will
+# assume that you want to reply to the recipients of that message rather
+# than to yourself.
+#
+# Also see the ``alternates'' command.
+#
+#
+# set reply_to=ask-yes
+#
+# Name: reply_to
+# Type: quadoption
+# Default: ask-yes
+#
+#
+# If set, when replying to a message, Mutt will use the address listed
+# in the Reply-to: header as the recipient of the reply. If unset,
+# it will use the address in the From: header field instead. This
+# option is useful for reading a mailing list that sets the Reply-To:
+# header field to the list address and you want to send a private
+# message to the author of a message.
+#
+#
+# set resolve=yes
+#
+# Name: resolve
+# Type: boolean
+# Default: yes
+#
+#
+# When set, the cursor will be automatically advanced to the next
+# (possibly undeleted) message whenever a command that modifies the
+# current message is executed.
+#
+#
+# set reverse_alias=no
+#
+# Name: reverse_alias
+# Type: boolean
+# Default: no
+#
+#
+# This variable controls whether or not Mutt will display the ``personal''
+# name from your aliases in the index menu if it finds an alias that
+# matches the message's sender. For example, if you have the following
+# alias:
+# alias juser abd30425@somewhere.net (Joe User)
+#
+# and then you receive mail which contains the following header:
+# From: abd30425@somewhere.net
+#
+# It would be displayed in the index menu as ``Joe User'' instead of
+# ``abd30425@somewhere.net.'' This is useful when the person's e-mail
+# address is not human friendly.
+#
+#
+# set reverse_name=no
+#
+# Name: reverse_name
+# Type: boolean
+# Default: no
+#
+#
+# It may sometimes arrive that you receive mail to a certain machine,
+# move the messages to another machine, and reply to some the messages
+# from there. If this variable is set, the default From: line of
+# the reply messages is built using the address where you received the
+# messages you are replying to if that address matches your
+# ``alternates''. If the variable is unset, or the address that would be
+# used doesn't match your ``alternates'', the From: line will use
+# your address on the current machine.
+#
+# Also see the ``alternates'' command.
+#
+#
+# set reverse_realname=yes
+#
+# Name: reverse_realname
+# Type: boolean
+# Default: yes
+#
+#
+# This variable fine-tunes the behavior of the $reverse_name feature.
+# When it is set, mutt will use the address from incoming messages as-is,
+# possibly including eventual real names. When it is unset, mutt will
+# override any such real names with the setting of the $realname variable.
+#
+#
+# set rfc2047_parameters=no
+#
+# Name: rfc2047_parameters
+# Type: boolean
+# Default: no
+#
+#
+# When this variable is set, Mutt will decode RFC2047-encoded MIME
+# parameters. You want to set this variable when mutt suggests you
+# to save attachments to files named like:
+# =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
+#
+# When this variable is set interactively, the change won't be
+# active until you change folders.
+#
+# Note that this use of RFC2047's encoding is explicitly
+# prohibited by the standard, but nevertheless encountered in the
+# wild.
+#
+# Also note that setting this parameter will not have the effect
+# that mutt generates this kind of encoding. Instead, mutt will
+# unconditionally use the encoding specified in RFC2231.
+#
+#
+# set save_address=no
+#
+# Name: save_address
+# Type: boolean
+# Default: no
+#
+#
+# If set, mutt will take the sender's full address when choosing a
+# default folder for saving a mail. If $save_name or $force_name
+# is set too, the selection of the Fcc folder will be changed as well.
+#
+#
+# set save_empty=yes
+#
+# Name: save_empty
+# Type: boolean
+# Default: yes
+#
+#
+# When unset, mailboxes which contain no saved messages will be removed
+# when closed (the exception is $spoolfile which is never removed).
+# If set, mailboxes are never removed.
+#
+# Note: This only applies to mbox and MMDF folders, Mutt does not
+# delete MH and Maildir directories.
+#
+#
+# set save_history=0
+#
+# Name: save_history
+# Type: number
+# Default: 0
+#
+#
+# This variable controls the size of the history (per category) saved in the
+# $history_file file.
+#
+#
+# set save_name=no
+#
+# Name: save_name
+# Type: boolean
+# Default: no
+#
+#
+# This variable controls how copies of outgoing messages are saved.
+# When set, a check is made to see if a mailbox specified by the
+# recipient address exists (this is done by searching for a mailbox in
+# the $folder directory with the username part of the
+# recipient address). If the mailbox exists, the outgoing message will
+# be saved to that mailbox, otherwise the message is saved to the
+# $record mailbox.
+#
+# Also see the $force_name variable.
+#
+#
+# set score=yes
+#
+# Name: score
+# Type: boolean
+# Default: yes
+#
+#
+# When this variable is unset, scoring is turned off. This can
+# be useful to selectively disable scoring for certain folders when the
+# $score_threshold_delete variable and related are used.
+#
+#
+# set score_threshold_delete=-1
+#
+# Name: score_threshold_delete
+# Type: number
+# Default: -1
+#
+#
+# Messages which have been assigned a score equal to or lower than the value
+# of this variable are automatically marked for deletion by mutt. Since
+# mutt scores are always greater than or equal to zero, the default setting
+# of this variable will never mark a message for deletion.
+#
+#
+# set score_threshold_flag=9999
+#
+# Name: score_threshold_flag
+# Type: number
+# Default: 9999
+#
+#
+# Messages which have been assigned a score greater than or equal to this
+# variable's value are automatically marked "flagged".
+#
+#
+# set score_threshold_read=-1
+#
+# Name: score_threshold_read
+# Type: number
+# Default: -1
+#
+#
+# Messages which have been assigned a score equal to or lower than the value
+# of this variable are automatically marked as read by mutt. Since
+# mutt scores are always greater than or equal to zero, the default setting
+# of this variable will never mark a message read.
+#
+#
+# set search_context=0
+#
+# Name: search_context
+# Type: number
+# Default: 0
+#
+#
+# For the pager, this variable specifies the number of lines shown
+# before search results. By default, search results will be top-aligned.
+#
+#
+# set send_charset="us-ascii:iso-8859-1:utf-8"
+#
+# Name: send_charset
+# Type: string
+# Default: "us-ascii:iso-8859-1:utf-8"
+#
+#
+# A colon-delimited list of character sets for outgoing messages. Mutt will use the
+# first character set into which the text can be converted exactly.
+# If your $charset is not ``iso-8859-1'' and recipients may not
+# understand ``UTF-8'', it is advisable to include in the list an
+# appropriate widely used standard character set (such as
+# ``iso-8859-2'', ``koi8-r'' or ``iso-2022-jp'') either instead of or after
+# ``iso-8859-1''.
+#
+# In case the text cannot be converted into one of these exactly,
+# mutt uses $charset as a fallback.
+#
+#
+# set sendmail="/usr/sbin/sendmail -oem -oi"
+#
+# Name: sendmail
+# Type: path
+# Default: "/usr/sbin/sendmail -oem -oi"
+#
+#
+# Specifies the program and arguments used to deliver mail sent by Mutt.
+# Mutt expects that the specified program interprets additional
+# arguments as recipient addresses.
+#
+#
+# set sendmail_wait=0
+#
+# Name: sendmail_wait
+# Type: number
+# Default: 0
+#
+#
+# Specifies the number of seconds to wait for the $sendmail process
+# to finish before giving up and putting delivery in the background.
+#
+# Mutt interprets the value of this variable as follows:
+# >0 number of seconds to wait for sendmail to finish before continuing
+# 0 wait forever for sendmail to finish
+# <0 always put sendmail in the background without waiting
+#
+#
+# Note that if you specify a value other than 0, the output of the child
+# process will be put in a temporary file. If there is some error, you
+# will be informed as to where to find the output.
+#
+#
+# set shell=""
+#
+# Name: shell
+# Type: path
+# Default: ""
+#
+#
+# Command to use when spawning a subshell. By default, the user's login
+# shell from /etc/passwd is used.
+#
+#
+# set save_unsubscribed=no
+#
+# Name: save_unsubscribed
+# Type: boolean
+# Default: no
+#
+#
+# When set, info about unsubscribed newsgroups will be saved into
+# ``newsrc'' file and into cache.
+#
+#
+# set show_new_news=yes
+#
+# Name: show_new_news
+# Type: boolean
+# Default: yes
+#
+#
+# If set, newsserver will be asked for new newsgroups on entering
+# the browser. Otherwise, it will be done only once for a newsserver.
+# Also controls whether or not number of new articles of subscribed
+# newsgroups will be then checked.
+#
+#
+# set show_only_unread=no
+#
+# Name: show_only_unread
+# Type: boolean
+# Default: no
+#
+#
+# If set, only subscribed newsgroups that contain unread articles
+# will be displayed in browser.
+#
+#
+# set sig_dashes=yes
+#
+# Name: sig_dashes
+# Type: boolean
+# Default: yes
+#
+#
+# If set, a line containing ``-- '' (note the trailing space) will be inserted before your
+# $signature. It is strongly recommended that you not unset
+# this variable unless your signature contains just your name. The
+# reason for this is because many software packages use ``-- \n'' to
+# detect your signature. For example, Mutt has the ability to highlight
+# the signature in a different color in the built-in pager.
+#
+#
+# set sig_on_top=no
+#
+# Name: sig_on_top
+# Type: boolean
+# Default: no
+#
+#
+# If set, the signature will be included before any quoted or forwarded
+# text. It is strongly recommended that you do not set this variable
+# unless you really know what you are doing, and are prepared to take
+# some heat from netiquette guardians.
+#
+#
+# set signature="~/.signature"
+#
+# Name: signature
+# Type: path
+# Default: "~/.signature"
+#
+#
+# Specifies the filename of your signature, which is appended to all
+# outgoing messages. If the filename ends with a pipe (``|''), it is
+# assumed that filename is a shell command and input should be read from
+# its standard output.
+#
+#
+# set simple_search="~f %s | ~s %s"
+#
+# Name: simple_search
+# Type: string
+# Default: "~f %s | ~s %s"
+#
+#
+# Specifies how Mutt should expand a simple search into a real search
+# pattern. A simple search is one that does not contain any of the ``~'' pattern
+# operators. See ``patterns'' for more information on search patterns.
+#
+# For example, if you simply type ``joe'' at a search or limit prompt, Mutt
+# will automatically expand it to the value specified by this variable by
+# replacing ``%s'' with the supplied string.
+# For the default value, ``joe'' would be expanded to: ``~f joe | ~s joe''.
+#
+#
+# set sleep_time=1
+#
+# Name: sleep_time
+# Type: number
+# Default: 1
+#
+#
+# Specifies time, in seconds, to pause while displaying certain informational
+# messages, while moving from folder to folder and after expunging
+# messages from the current folder. The default is to pause one second, so
+# a value of zero for this option suppresses the pause.
+#
+#
+# set smart_wrap=yes
+#
+# Name: smart_wrap
+# Type: boolean
+# Default: yes
+#
+#
+# Controls the display of lines longer than the screen width in the
+# internal pager. If set, long lines are wrapped at a word boundary. If
+# unset, lines are simply wrapped at the screen edge. Also see the
+# $markers variable.
+#
+#
+# set smileys="(>From )|(:[-^]?[][)(><}{|/DP])"
+#
+# Name: smileys
+# Type: regular expression
+# Default: "(>From )|(:[-^]?[][)(><}{|/DP])"
+#
+#
+# The pager uses this variable to catch some common false
+# positives of $quote_regexp, most notably smileys and not consider
+# a line quoted text if it also matches $smileys. This mostly
+# happens at the beginning of a line.
+#
+#
+# set smime_ask_cert_label=yes
+#
+# Name: smime_ask_cert_label
+# Type: boolean
+# Default: yes
+#
+#
+# This flag controls whether you want to be asked to enter a label
+# for a certificate about to be added to the database or not. It is
+# set by default.
+# (S/MIME only)
+#
+#
+# set smime_ca_location=""
+#
+# Name: smime_ca_location
+# Type: path
+# Default: ""
+#
+#
+# This variable contains the name of either a directory, or a file which
+# contains trusted certificates for use with OpenSSL.
+# (S/MIME only)
+#
+#
+# set smime_certificates=""
+#
+# Name: smime_certificates
+# Type: path
+# Default: ""
+#
+#
+# Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle
+# storage and retrieval of keys by itself. This is very basic right
+# now, and keys and certificates are stored in two different
+# directories, both named as the hash-value retrieved from
+# OpenSSL. There is an index file which contains mailbox-address
+# keyid pairs, and which can be manually edited. This option points to
+# the location of the certificates.
+# (S/MIME only)
+#
+#
+# set smime_decrypt_command=""
+#
+# Name: smime_decrypt_command
+# Type: string
+# Default: ""
+#
+#
+# This format string specifies a command which is used to decrypt
+# application/x-pkcs7-mime attachments.
+#
+# The OpenSSL command formats have their own set of printf(3)-like sequences
+# similar to PGP's:
+# %f Expands to the name of a file containing a message.
+# %s Expands to the name of a file containing the signature part
+# of a multipart/signed attachment when verifying it.
+# %k The key-pair specified with $smime_default_key
+# %c One or more certificate IDs.
+# %a The algorithm used for encryption.
+# %C CA location: Depending on whether $smime_ca_location
+# points to a directory or file, this expands to
+# ``-CApath $smime_ca_location'' or ``-CAfile $smime_ca_location''.
+#
+#
+# For examples on how to configure these formats, see the smime.rc in
+# the samples/ subdirectory which has been installed on your system
+# alongside the documentation.
+# (S/MIME only)
+#
+#
+# set smime_decrypt_use_default_key=yes
+#
+# Name: smime_decrypt_use_default_key
+# Type: boolean
+# Default: yes
+#
+#
+# If set (default) this tells mutt to use the default key for decryption. Otherwise,
+# if managing multiple certificate-key-pairs, mutt will try to use the mailbox-address
+# to determine the key to use. It will ask you to supply a key, if it can't find one.
+# (S/MIME only)
+#
+#
+# set smime_default_key=""
+#
+# Name: smime_default_key
+# Type: string
+# Default: ""
+#
+#
+# This is the default key-pair to use for signing. This must be set to the
+# keyid (the hash-value that OpenSSL generates) to work properly
+# (S/MIME only)
+#
+#
+# set smime_encrypt_command=""
+#
+# Name: smime_encrypt_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to create encrypted S/MIME messages.
+#
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
+#
+#
+# set smime_encrypt_with=""
+#
+# Name: smime_encrypt_with
+# Type: string
+# Default: ""
+#
+#
+# This sets the algorithm that should be used for encryption.
+# Valid choices are ``des'', ``des3'', ``rc2-40'', ``rc2-64'', ``rc2-128''.
+# If unset, ``3des'' (TripleDES) is used.
+# (S/MIME only)
+#
+#
+# set smime_get_cert_command=""
+#
+# Name: smime_get_cert_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to extract X509 certificates from a PKCS7 structure.
+#
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
+#
+#
+# set smime_get_cert_email_command=""
+#
+# Name: smime_get_cert_email_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to extract the mail address(es) used for storing
+# X509 certificates, and for verification purposes (to check whether the
+# certificate was issued for the sender's mailbox).
+#
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
+#
+#
+# set smime_get_signer_cert_command=""
+#
+# Name: smime_get_signer_cert_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to extract only the signers X509 certificate from a S/MIME
+# signature, so that the certificate's owner may get compared to the
+# email's ``From:'' field.
+#
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
+#
+#
+# set smime_import_cert_command=""
+#
+# Name: smime_import_cert_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to import a certificate via smime_keys.
+#
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
+#
+#
+# set smime_is_default=no
+#
+# Name: smime_is_default
+# Type: boolean
+# Default: no
+#
+#
+# The default behavior of mutt is to use PGP on all auto-sign/encryption
+# operations. To override and to use OpenSSL instead this must be set.
+# However, this has no effect while replying, since mutt will automatically
+# select the same application that was used to sign/encrypt the original
+# message. (Note that this variable can be overridden by unsetting $crypt_autosmime.)
+# (S/MIME only)
+#
+#
+# set smime_keys=""
+#
+# Name: smime_keys
+# Type: path
+# Default: ""
+#
+#
+# Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle
+# storage and retrieval of keys/certs by itself. This is very basic right now,
+# and stores keys and certificates in two different directories, both
+# named as the hash-value retrieved from OpenSSL. There is an index file
+# which contains mailbox-address keyid pair, and which can be manually
+# edited. This option points to the location of the private keys.
+# (S/MIME only)
+#
+#
+# set smime_pk7out_command=""
+#
+# Name: smime_pk7out_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to extract PKCS7 structures of S/MIME signatures,
+# in order to extract the public X509 certificate(s).
+#
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
+#
+#
+# set smime_sign_command=""
+#
+# Name: smime_sign_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to created S/MIME signatures of type
+# multipart/signed, which can be read by all mail clients.
+#
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
+#
+#
+# set smime_sign_opaque_command=""
+#
+# Name: smime_sign_opaque_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to created S/MIME signatures of type
+# application/x-pkcs7-signature, which can only be handled by mail
+# clients supporting the S/MIME extension.
+#
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
+#
+#
+# set smime_timeout=300
+#
+# Name: smime_timeout
+# Type: number
+# Default: 300
+#
+#
+# The number of seconds after which a cached passphrase will expire if
+# not used.
+# (S/MIME only)
+#
+#
+# set smime_verify_command=""
+#
+# Name: smime_verify_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to verify S/MIME signatures of type multipart/signed.
+#
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
+#
+#
+# set smime_verify_opaque_command=""
+#
+# Name: smime_verify_opaque_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to verify S/MIME signatures of type
+# application/x-pkcs7-mime.
+#
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
+#
+#
+# set smtp_authenticators=""
+#
+# Name: smtp_authenticators
+# Type: string
+# Default: ""
+#
+#
+# This is a colon-delimited list of authentication methods mutt may
+# attempt to use to log in to an SMTP server, in the order mutt should
+# try them. Authentication methods are any SASL mechanism, e.g.
+# ``digest-md5'', ``gssapi'' or ``cram-md5''.
+# This option is case-insensitive. If it is ``unset''
+# (the default) mutt will try all available methods, in order from
+# most-secure to least-secure.
+#
+# Example:
+# set smtp_authenticators="digest-md5:cram-md5"
+#
+#
+# set smtp_pass=""
+#
+# Name: smtp_pass
+# Type: string
+# Default: ""
+#
+#
+# Specifies the password for your SMTP account. If unset, Mutt will
+# prompt you for your password when you first send mail via SMTP.
+# See $smtp_url to configure mutt to send mail via SMTP.
+#
+# Warning: you should only use this option when you are on a
+# fairly secure machine, because the superuser can read your muttrc even
+# if you are the only one who can read the file.
+#
+#
+# set smtp_url=""
+#
+# Name: smtp_url
+# Type: string
+# Default: ""
+#
+#
+# Defines the SMTP smarthost where sent messages should relayed for
+# delivery. This should take the form of an SMTP URL, e.g.:
+# smtp[s]://[user[:pass]@]host[:port]
+#
+# where ``[...]'' denotes an optional part.
+# Setting this variable overrides the value of the $sendmail
+# variable.
+#
+#
+# set sort=date
+#
+# Name: sort
+# Type: sort order
+# Default: date
+#
+#
+# Specifies how to sort messages in the ``index'' menu. Valid values
+# are:
+# - date or date-sent
+# - date-received
+# - from
+# - mailbox-order (unsorted)
+# - score
+# - size
+# - spam
+# - subject
+# - threads
+# - to
+#
+#
+# You may optionally use the ``reverse-'' prefix to specify reverse sorting
+# order (example: ``set sort=reverse-date-sent'').
+#
+#
+# set sort_alias=alias
+#
+# Name: sort_alias
+# Type: sort order
+# Default: alias
+#
+#
+# Specifies how the entries in the ``alias'' menu are sorted. The
+# following are legal values:
+# - address (sort alphabetically by email address)
+# - alias (sort alphabetically by alias name)
+# - unsorted (leave in order specified in .muttrc)
+#
+#
+# set sort_aux=date
+#
+# Name: sort_aux
+# Type: sort order
+# Default: date
+#
+#
+# When sorting by threads, this variable controls how threads are sorted
+# in relation to other threads, and how the branches of the thread trees
+# are sorted. This can be set to any value that $sort can, except
+# ``threads'' (in that case, mutt will just use ``date-sent''). You can also
+# specify the ``last-'' prefix in addition to the ``reverse-'' prefix, but ``last-''
+# must come after ``reverse-''. The ``last-'' prefix causes messages to be
+# sorted against its siblings by which has the last descendant, using
+# the rest of $sort_aux as an ordering. For instance,
+# set sort_aux=last-date-received
+#
+# would mean that if a new message is received in a
+# thread, that thread becomes the last one displayed (or the first, if
+# you have ``set sort=reverse-threads''.)
+#
+# Note: For reversed $sort
+# order $sort_aux is reversed again (which is not the right thing to do,
+# but kept to not break any existing configuration setting).
+#
+#
+# set sort_browser=alpha
+#
+# Name: sort_browser
+# Type: sort order
+# Default: alpha
+#
+#
+# Specifies how to sort entries in the file browser. By default, the
+# entries are sorted alphabetically. Valid values:
+# - alpha (alphabetically)
+# - date
+# - size
+# - unsorted
+#
+#
+# You may optionally use the ``reverse-'' prefix to specify reverse sorting
+# order (example: ``set sort_browser=reverse-date'').
+#
+#
+# set sort_re=yes
+#
+# Name: sort_re
+# Type: boolean
+# Default: yes
+#
+#
+# This variable is only useful when sorting by threads with
+# $strict_threads unset. In that case, it changes the heuristic
+# mutt uses to thread messages by subject. With $sort_re set, mutt will
+# only attach a message as the child of another message by subject if
+# the subject of the child message starts with a substring matching the
+# setting of $reply_regexp. With $sort_re unset, mutt will attach
+# the message whether or not this is the case, as long as the
+# non-$reply_regexp parts of both messages are identical.
+#
+#
+# set spam_separator=","
+#
+# Name: spam_separator
+# Type: string
+# Default: ","
+#
+#
+# This variable controls what happens when multiple spam headers
+# are matched: if unset, each successive header will overwrite any
+# previous matches value for the spam label. If set, each successive
+# match will append to the previous, using this variable's value as a
+# separator.
+#
+#
+# set spoolfile=""
+#
+# Name: spoolfile
+# Type: path
+# Default: ""
+#
+#
+# If your spool mailbox is in a non-default place where Mutt cannot find
+# it, you can specify its location with this variable. Mutt will
+# initially set this variable to the value of the environment
+# variable $MAIL or $MAILDIR if either is defined.
+#
+#
+# set ssl_ca_certificates_file=""
+#
+# Name: ssl_ca_certificates_file
+# Type: path
+# Default: ""
+#
+#
+# This variable specifies a file containing trusted CA certificates.
+# Any server certificate that is signed with one of these CA
+# certificates is also automatically accepted.
+#
+# Example:
+# set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
+#
+#
+# set ssl_client_cert=""
+#
+# Name: ssl_client_cert
+# Type: path
+# Default: ""
+#
+#
+# The file containing a client certificate and its associated private
+# key.
+#
+#
+# set ssl_force_tls=no
+#
+# Name: ssl_force_tls
+# Type: boolean
+# Default: no
+#
+#
+# If this variable is set, Mutt will require that all connections
+# to remote servers be encrypted. Furthermore it will attempt to
+# negotiate TLS even if the server does not advertise the capability,
+# since it would otherwise have to abort the connection anyway. This
+# option supersedes $ssl_starttls.
+#
+#
+# set ssl_min_dh_prime_bits=0
+#
+# Name: ssl_min_dh_prime_bits
+# Type: number
+# Default: 0
+#
+#
+# This variable specifies the minimum acceptable prime size (in bits)
+# for use in any Diffie-Hellman key exchange. A value of 0 will use
+# the default from the GNUTLS library.
+#
+#
+# set ssl_starttls=yes
+#
+# Name: ssl_starttls
+# Type: quadoption
+# Default: yes
+#
+#
+# If set (the default), mutt will attempt to use STARTTLS on servers
+# advertising the capability. When unset, mutt will not attempt to
+# use STARTTLS regardless of the server's capabilities.
+#
+#
+# set ssl_use_sslv2=no
+#
+# Name: ssl_use_sslv2
+# Type: boolean
+# Default: no
+#
+#
+# This variable specifies whether to attempt to use SSLv2 in the
+# SSL authentication process.
+#
+#
+# set ssl_use_sslv3=yes
+#
+# Name: ssl_use_sslv3
+# Type: boolean
+# Default: yes
+#
+#
+# This variable specifies whether to attempt to use SSLv3 in the
+# SSL authentication process.
+#
+#
+# set ssl_use_tlsv1=yes
+#
+# Name: ssl_use_tlsv1
+# Type: boolean
+# Default: yes
+#
+#
+# This variable specifies whether to attempt to use TLSv1 in the
+# SSL authentication process.
+#
+#
+# set ssl_usesystemcerts=yes
+#
+# Name: ssl_usesystemcerts
+# Type: boolean
+# Default: yes
+#
+#
+# If set to yes, mutt will use CA certificates in the
+# system-wide certificate store when checking if a server certificate
+# is signed by a trusted CA.
+#
+#
+# set ssl_verify_dates=yes
+#
+# Name: ssl_verify_dates
+# Type: boolean
+# Default: yes
+#
+#
+# If set (the default), mutt will not automatically accept a server
+# certificate that is either not yet valid or already expired. You should
+# only unset this for particular known hosts, using the
+# <account-hook> function.
+#
+#
+# set ssl_verify_host=yes
+#
+# Name: ssl_verify_host
+# Type: boolean
+# Default: yes
+#
+#
+# If set (the default), mutt will not automatically accept a server
+# certificate whose host name does not match the host used in your folder
+# URL. You should only unset this for particular known hosts, using
+# the <account-hook> function.
+#
+#
+# set status_chars="-*%A"
+#
+# Name: status_chars
+# Type: string
+# Default: "-*%A"
+#
+#
+# Controls the characters used by the ``%r'' indicator in
+# $status_format. The first character is used when the mailbox is
+# unchanged. The second is used when the mailbox has been changed, and
+# it needs to be resynchronized. The third is used if the mailbox is in
+# read-only mode, or if the mailbox will not be written when exiting
+# that mailbox (You can toggle whether to write changes to a mailbox
+# with the <toggle-write> operation, bound by default to ``%''). The fourth
+# is used to indicate that the current folder has been opened in attach-
+# message mode (Certain operations like composing a new mail, replying,
+# forwarding, etc. are not permitted in this mode).
+#
+#
+# set status_format="-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"
+#
+# Name: status_format
+# Type: string
+# Default: "-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"
+#
+#
+# Controls the format of the status line displayed in the ``index''
+# menu. This string is similar to $index_format, but has its own
+# set of printf(3)-like sequences:
+# %b number of mailboxes with new mail *
+# %d number of deleted messages *
+# %f the full pathname of the current mailbox
+# %F number of flagged messages *
+# %h local hostname
+# %l size (in bytes) of the current mailbox *
+# %L size (in bytes) of the messages shown
+# (i.e., which match the current limit) *
+# %m the number of messages in the mailbox *
+# %M the number of messages shown (i.e., which match the current limit) *
+# %n number of new messages in the mailbox *
+# %o number of old unread messages *
+# %p number of postponed messages *
+# %P percentage of the way through the index
+# %r modified/read-only/won't-write/attach-message indicator,
+# according to $status_chars
+# %s current sorting mode ($sort)
+# %S current aux sorting method ($sort_aux)
+# %t number of tagged messages *
+# %u number of unread messages *
+# %v Mutt version string
+# %V currently active limit pattern, if any *
+# %>X right justify the rest of the string and pad with ``X''
+# %|X pad to the end of the line with ``X''
+# %*X soft-fill with character ``X'' as pad
+#
+#
+# For an explanation of ``soft-fill'', see the $index_format documentation.
+#
+# * = can be optionally printed if nonzero
+#
+# Some of the above sequences can be used to optionally print a string
+# if their value is nonzero. For example, you may only want to see the
+# number of flagged messages if such messages exist, since zero is not
+# particularly meaningful. To optionally print a string based upon one
+# of the above sequences, the following construct is used:
+#
+# %?<sequence_char>?<optional_string>?
+#
+# where sequence_char is a character from the table above, and
+# optional_string is the string you would like printed if
+# sequence_char is nonzero. optional_string may contain
+# other sequences as well as normal text, but you may not nest
+# optional strings.
+#
+# Here is an example illustrating how to optionally print the number of
+# new messages in a mailbox:
+#
+# %?n?%n new messages.?
+#
+# You can also switch between two strings using the following construct:
+#
+# %?<sequence_char>?<if_string>&<else_string>?
+#
+# If the value of sequence_char is non-zero, if_string will
+# be expanded, otherwise else_string will be expanded.
+#
+# You can force the result of any printf(3)-like sequence to be lowercase
+# by prefixing the sequence character with an underscore (``_'') sign.
+# For example, if you want to display the local hostname in lowercase,
+# you would use: ``%_h''.
+#
+# If you prefix the sequence character with a colon (``:'') character, mutt
+# will replace any dots in the expansion by underscores. This might be helpful
+# with IMAP folders that don't like dots in folder names.
+#
+#
+# set status_on_top=no
+#
+# Name: status_on_top
+# Type: boolean
+# Default: no
+#
+#
+# Setting this variable causes the ``status bar'' to be displayed on
+# the first line of the screen rather than near the bottom. If $help
+# is set, too it'll be placed at the bottom.
+#
+#
+# set strict_threads=no
+#
+# Name: strict_threads
+# Type: boolean
+# Default: no
+#
+#
+# If set, threading will only make use of the ``In-Reply-To'' and
+# ``References:'' fields when you $sort by message threads. By
+# default, messages with the same subject are grouped together in
+# ``pseudo threads.''. This may not always be desirable, such as in a
+# personal mailbox where you might have several unrelated messages with
+# the subjects like ``hi'' which will get grouped together. See also
+# $sort_re for a less drastic way of controlling this
+# behavior.
+#
+#
+# set suspend=yes
+#
+# Name: suspend
+# Type: boolean
+# Default: yes
+#
+#
+# When unset, mutt won't stop when the user presses the terminal's
+# susp key, usually ``^Z''. This is useful if you run mutt
+# inside an xterm using a command like ``xterm -e mutt''.
+#
+#
+# set text_flowed=no
+#
+# Name: text_flowed
+# Type: boolean
+# Default: no
+#
+#
+# When set, mutt will generate ``format=flowed'' bodies with a content type
+# of ``text/plain; format=flowed''.
+# This format is easier to handle for some mailing software, and generally
+# just looks like ordinary text. To actually make use of this format's
+# features, you'll need support in your editor.
+#
+# Note that $indent_string is ignored when this option is set.
+#
+#
+# set thorough_search=yes
+#
+# Name: thorough_search
+# Type: boolean
+# Default: yes
+#
+#
+# Affects the ~b and ~h search operations described in
+# section ``patterns''. If set, the headers and body/attachments of
+# messages to be searched are decoded before searching. If unset,
+# messages are searched as they appear in the folder.
+#
+# Users searching attachments or for non-ASCII characters should set
+# this value because decoding also includes MIME parsing/decoding and possible
+# character set conversions. Otherwise mutt will attempt to match against the
+# raw message received (for example quoted-printable encoded or with encoded
+# headers) which may lead to incorrect search results.
+#
+#
+# set thread_received=no
+#
+# Name: thread_received
+# Type: boolean
+# Default: no
+#
+#
+# When set, mutt uses the date received rather than the date sent
+# to thread messages by subject.
+#
+#
+# set tilde=no
+#
+# Name: tilde
+# Type: boolean
+# Default: no
+#
+#
+# When set, the internal-pager will pad blank lines to the bottom of the
+# screen with a tilde (``~'').
+#
+#
+# set time_inc=0
+#
+# Name: time_inc
+# Type: number
+# Default: 0
+#
+#
+# Along with $read_inc, $write_inc, and $net_inc, this
+# variable controls the frequency with which progress updates are
+# displayed. It suppresses updates less than $time_inc milliseconds
+# apart. This can improve throughput on systems with slow terminals,
+# or when running mutt on a remote system.
+#
+# Also see the ``tuning'' section of the manual for performance considerations.
+#
+#
+# set timeout=600
+#
+# Name: timeout
+# Type: number
+# Default: 600
+#
+#
+# When Mutt is waiting for user input either idling in menus or
+# in an interactive prompt, Mutt would block until input is
+# present. Depending on the context, this would prevent certain
+# operations from working, like checking for new mail or keeping
+# an IMAP connection alive.
+#
+# This variable controls how many seconds Mutt will at most wait
+# until it aborts waiting for input, performs these operations and
+# continues to wait for input.
+#
+# A value of zero or less will cause Mutt to never time out.
+#
+#
+# set tmpdir=""
+#
+# Name: tmpdir
+# Type: path
+# Default: ""
+#
+#
+# This variable allows you to specify where Mutt will place its
+# temporary files needed for displaying and composing messages. If
+# this variable is not set, the environment variable $TMPDIR is
+# used. If $TMPDIR is not set then ``/tmp'' is used.
+#
+#
+# set to_chars=" +TCFL"
+#
+# Name: to_chars
+# Type: string
+# Default: " +TCFL"
+#
+#
+# Controls the character used to indicate mail addressed to you. The
+# first character is the one used when the mail is not addressed to your
+# address. The second is used when you are the only
+# recipient of the message. The third is when your address
+# appears in the ``To:'' header field, but you are not the only recipient of
+# the message. The fourth character is used when your
+# address is specified in the ``Cc:'' header field, but you are not the only
+# recipient. The fifth character is used to indicate mail that was sent
+# by you. The sixth character is used to indicate when a mail
+# was sent to a mailing-list you subscribe to.
+#
+#
+# set tunnel=""
+#
+# Name: tunnel
+# Type: string
+# Default: ""
+#
+#
+# Setting this variable will cause mutt to open a pipe to a command
+# instead of a raw socket. You may be able to use this to set up
+# preauthenticated connections to your IMAP/POP3/SMTP server. Example:
+# set tunnel="ssh -q mailhost.net /usr/local/libexec/imapd"
+#
+# Note: For this example to work you must be able to log in to the remote
+# machine without having to enter a password.
+#
+# When set, Mutt uses the tunnel for all remote connections.
+# Please see ``account-hook'' in the manual for how to use different
+# tunnel commands per connection.
+#
+#
+# set uncollapse_jump=no
+#
+# Name: uncollapse_jump
+# Type: boolean
+# Default: no
+#
+#
+# When set, Mutt will jump to the next unread message, if any,
+# when the current thread is uncollapsed.
+#
+#
+# set use_8bitmime=no
+#
+# Name: use_8bitmime
+# Type: boolean
+# Default: no
+#
+#
+# Warning: do not set this variable unless you are using a version
+# of sendmail which supports the -B8BITMIME flag (such as sendmail
+# 8.8.x) or you may not be able to send mail.
+#
+# When set, Mutt will invoke $sendmail with the -B8BITMIME
+# flag when sending 8-bit messages to enable ESMTP negotiation.
+#
+#
+# set use_domain=yes
+#
+# Name: use_domain
+# Type: boolean
+# Default: yes
+#
+#
+# When set, Mutt will qualify all local addresses (ones without the
+# ``@host'' portion) with the value of $hostname. If unset, no
+# addresses will be qualified.
+#
+#
+# set use_envelope_from=no
+#
+# Name: use_envelope_from
+# Type: boolean
+# Default: no
+#
+#
+# When set, mutt will set the envelope sender of the message.
+# If $envelope_from_address is set, it will be used as the sender
+# address. If unset, mutt will attempt to derive the sender from the
+# ``From:'' header.
+#
+# Note that this information is passed to sendmail command using the
+# -f command line switch. Therefore setting this option is not useful
+# if the $sendmail variable already contains -f or if the
+# executable pointed to by $sendmail doesn't support the -f switch.
+#
+#
+# set use_from=yes
+#
+# Name: use_from
+# Type: boolean
+# Default: yes
+#
+#
+# When set, Mutt will generate the ``From:'' header field when
+# sending messages. If unset, no ``From:'' header field will be
+# generated unless the user explicitly sets one using the ``my_hdr''
+# command.
+#
+#
+# set use_idn=yes
+#
+# Name: use_idn
+# Type: boolean
+# Default: yes
+#
+#
+# When set, Mutt will show you international domain names decoded.
+# Note: You can use IDNs for addresses even if this is unset.
+# This variable only affects decoding.
+#
+#
+# set use_ipv6=yes
+#
+# Name: use_ipv6
+# Type: boolean
+# Default: yes
+#
+#
+# When set, Mutt will look for IPv6 addresses of hosts it tries to
+# contact. If this option is unset, Mutt will restrict itself to IPv4 addresses.
+# Normally, the default should work.
+#
+#
+# set user_agent=yes
+#
+# Name: user_agent
+# Type: boolean
+# Default: yes
+#
+#
+# When set, mutt will add a ``User-Agent:'' header to outgoing
+# messages, indicating which version of mutt was used for composing
+# them.
+#
+#
+# set visual=""
+#
+# Name: visual
+# Type: path
+# Default: ""
+#
+#
+# Specifies the visual editor to invoke when the ``~v'' command is
+# given in the built-in editor.
+#
+#
+# set wait_key=yes
+#
+# Name: wait_key
+# Type: boolean
+# Default: yes
+#
+#
+# Controls whether Mutt will ask you to press a key after an external command
+# has been invoked by these functions: <shell-escape>,
+# <pipe-message>, <pipe-entry>, <print-message>,
+# and <print-entry> commands.
+#
+# It is also used when viewing attachments with ``auto_view'', provided
+# that the corresponding mailcap entry has a needsterminal flag,
+# and the external program is interactive.
+#
+# When set, Mutt will always ask for a key. When unset, Mutt will wait
+# for a key only if the external command returned a non-zero status.
+#
+#
+# set weed=yes
+#
+# Name: weed
+# Type: boolean
+# Default: yes
+#
+#
+# When set, mutt will weed headers when displaying, forwarding,
+# printing, or replying to messages.
+#
+#
+# set wrap=0
+#
+# Name: wrap
+# Type: number
+# Default: 0
+#
+#
+# When set to a positive value, mutt will wrap text at $wrap characters.
+# When set to a negative value, mutt will wrap text so that there are $wrap
+# characters of empty space on the right side of the terminal. Setting it
+# to zero makes mutt wrap at the terminal width.
+#
+#
+# set wrap_headers=78
+#
+# Name: wrap_headers
+# Type: number
+# Default: 78
+#
+#
+# This option specifies the number of characters to use for wrapping
+# an outgoing message's headers. Allowed values are between 78 and 998
+# inclusive.
+#
+# Note: This option usually shouldn't be changed. RFC5233
+# recommends a line length of 78 (the default), so please only change
+# this setting when you know what you're doing.
+#
+#
+# set wrap_search=yes
+#
+# Name: wrap_search
+# Type: boolean
+# Default: yes
+#
+#
+# Controls whether searches wrap around the end.
+#
+# When set, searches will wrap around the first (or last) item. When
+# unset, incremental searches will not wrap.
+#
+#
+# set wrapmargin=0
+#
+# Name: wrapmargin
+# Type: number
+# Default: 0
+#
+#
+# (DEPRECATED) Equivalent to setting $wrap with a negative value.
+#
+#
+# set write_bcc=yes
+#
+# Name: write_bcc
+# Type: boolean
+# Default: yes
+#
+#
+# Controls whether mutt writes out the Bcc header when saving
+# messages to FCC. Bcc headers will never be written to a message
+# when sending it.
+#
+#
+# set write_inc=10
+#
+# Name: write_inc
+# Type: number
+# Default: 10
+#
+#
+# When writing a mailbox, a message will be printed every
+# $write_inc messages to indicate progress. If set to 0, only a
+# single message will be displayed before writing a mailbox.
+#
+# Also see the $read_inc, $net_inc and $time_inc variables and the
+# ``tuning'' section of the manual for performance considerations.
+#
+#
+# set x_comment_to=no
+#
+# Name: x_comment_to
+# Type: boolean
+# Default: no
+#
+#
+# If set, Mutt will add ``X-Comment-To:'' field (that contains full
+# name of original article author) to article that followuped to newsgroup.
+#
+#
projects / config / uhu1 / etc.git / commitdiff